product catalogue - PALKI - 精密运动测控伙伴 · 2014-09-20 · With optional ISOBUS CAN protocol, Epec Control Units make an ideal solution for agricultural machines too

product catalogue

Extensive experience and know-how of mobile machines

and special vehicles creates the foundation for Epec’s ability

to help machine manufacturers and partners develop efficient,

safe, and environmentally friendly mobile machines and utility

vehicles, enabling end users to maximise their productivity.

Epec Oy is a solution provider specializing in embedded control

systems, vehicle computers, and information logistics systems

for mobile machines and utility vehicles.

In addition to our line of quality-manufactured products,

services such as training and customer support are all available

along with our technical expertise.

We are fully committed to the goals and continuous success of

our customers and partners. We will work together to improve

machine efficiency and find the right solution to suit their

needs.

Our client base is both local and international, with our

two main business units including manufacturing located

in Finland. Local support and quality services can also be

found from our growing international network of partners,

conveniently serving their local markets.

epec - commitment to your continuous success

Machines and vehicles today must offer advantages

through productivity, performance, and dependability. They

should be efficient and cost effective in order to achieve full

machine potential.

Embedded control systems and vehicle computers help define

expected machine standards. They increase machine efficiency

and productivity by optimizing, and constantly monitoring and

diagnosing loads, pressures, temperatures, and other functions

around the machine, engine, etc.

Optimum performance and high output capability can be expected

from machines with these intelligent systems, contributing

to machine’s full potential, and supporting the overall process

performance for effectively carrying out work.

2

epec solution

Epec is a solution provider specializing in intelligent control

systems, vehicle computers, and information systems for mobile

machines. Epec helps its customers and partners to design and

working machines and special vehicles.

For challenging conditions

All Epec mobile control units can be used in rough terrain and

challenging conditions. They have a wide operating temperature

environmental conditions. Epec ECU’s, embedded displays, and

vehicle computers can be found from the range of products listed

in the following pages.

Products comply with normal automotive standards for EMC and

according to e17.

Open and compatible

Embedded control systems are based on PLCopen and CANopen®,

which make them easily scalable to meet requirements for both

small and large machines. Electronic control units (ECU) have

open I/O and communication interface, thus making it possible

to connect devices from other most common manufacturers to

optimize the whole machine environment, both technically and

ergonomically. In addition to CANopen® communication protocol,

SAE J1939 and ISOBUS are also available.

3

4

Epec EPC for vehicles and machines

Central unit

There are two alternative central units for the EPC: EPC-M18 and

EPC-C2D. EPC-M18 is equipped with Pentium M processor and

an EPC-C2D with Core 2 Duo processor. The EPC-C2D is one of the

most powerful vehicle computers in the market. Both units have

automatic integrated heating system and pioneering cooling

solution allowing a wide operating temperature area (-40°C to

+50°C). Also, endurance against vibration and impacts as well as

dirt and moisture have been taking into account.

The computer has two CAN 2.0B high speed interfaces, so it is

easy to integrate seamlessly with the embedded control system.

12V UPS –equipment is used to ensure the constant power supply

to guarantee the maximal usage of the machine. With the help of

external UPS-voltage it is possible to shut down the system in a

controlled manner and save all the information, also in situations

where the power supply voltage suddenly for some reason breaks off.

Separate CPU and display units make installing easy.

EPC is a modern and powerful vehicle computer designed

specially for demanding professional usage of mobile

machines and vehicles. Most advanced mobile working

machines are nowadays requiring more and more

intelligent and complex systems to run and operate

increase safety and ergonomics.

Conditions for mobile working machines, such as

underground mining machines or forest harvester

machines are very demanding, which requires more

more robust equipment, like the EPC computer. Product

complies all the normal automotive EMC-, vibration etc.

vehicle usage.

EPC consists of a heavy-duty computer specially

designed for mobile machines and a chrystal clear color

display, which with it´s high-bright panel is perfect for

cabins, where light comes from every direction. High

environmental tolerance, two separate standard CAN

bus connections, easy installing with an intelligent rack

system and other versatile options make the PC an ideal

choice for the demanding conditions of forest machines,

mobile cranes, piling machines and other heavy duty

applications.

pioneering cooling system. The automatic integrated

heating system and cooling system together with the

dust- and splash protection (IP54) guarantees forceful

and reliable operating even in the most challenging

conditions. The heavy-duty aluminium enclosure and

integrated shock protection further enhance the overall

robustness and the design of the unit. The option of a

separate connector unit enables connection interface

according to the customers needs.

Central unitThere are two alternative central units for the EPC: EPC-M18 and

ethernet e17

4

usb

need

5

Acc

esso

ries12VDC connector unit,

product order code E3002043-10

24VDC Connector unit,

product order code E3002043

CPU mounting plate for quick mounting

Cable kit 1/3/5m

PC display power supply cable

DVI-I cable for the display

USB-USB cable for the display

Product order code for 1m cable kit

E30801478


E30801479


E30801480

Windows® XP PRO,

product order code X0062603

GPS/GPRS combination antenna,

product order code KY0015

USB keyboard with integrated touchpad,

product order code KY0014

Display unit

Display unit is a robust display designed for a graphical user

interface of a vehicle computer. The materials used in this

dustproof display demonstrate that the equipment is designed for

extremely hard use. This is guaranteed by the robust aluminum

housing and a toughened glass TFT color LCD monitor.

An adjustable back light and good contrast makes usage very

comfortable also in very bright light conditions. The display unit

utilizes the newest communication interfaces and is very user

friendly thanks to it´s clear picture and sound features. Automatic

integrated heating guarantees a wide operating temperature

range. Main design features have been supported by high quality,

simplicity and robustness as well as Epec´s longterm experience

of control systems for challenging conditions.

There are two versions available of this display, one with hardened

glass and one with touch screen.

2 x CAN (ISO High Speed)•

Up to 4 x USB 2.0•

1 x Ethernet•

4 x RS232 (2 x Full interface)•

Connection for UPS (Back up •

battery)

Integrated heating•

1 x Compact Flash Slot •

Integrated GPS receiver •

and GPRS communication

(optional)

2 x video input for composite •

video (optional)

Nominal operating voltage •

12V/24 VDC

Heavy duty aluminium •

enclosure

Connector panel for easy •

installation

Operating temperature range: •

-40°C… +50°C

Protection class: IP54•

Outline dimensions: •

290 x 244 x 110 mm

EPC-M18 features:

Intel® Pentium® M 1.8 GHz •

Processor

1 GB DDR-SDRAM•

40 GB Wide Temperature HDD•

- pre-heating

- shock protection

Product order code

for EPM-M18 CPU full

version with all options

(model 2) E30C01569

EPC-C2D features:

Intel® Core 2 Duo Processor •

2 x 1,5 GHz

2 GB DDR2-SDRAM•

16 GB Wide Temperature 2,5” •

SDD (FLASH type)

Product order code for

EPC-C2D E30C01972

TFT Colour LCD, Size: 12.1 inch•

Resolution: 1024 x 768 (XGA), Contrast: 600:1•

Brightness: 400 cd/m• 2 (manually adjustable)

4 x USB 2.0 (internal USB hub)•

Aluminium enclosure•

Operating temperature range: -40°C…+50°C•

Automatic integrated heating•

Protection class: IP54•

Outline dimensions: 310 x 290 x 70 mm•

Product order code for the PC display with hardened glass E3003009

Product order code for the PC display with touch screen E3003009-10

5

product order code E30801481

6

Embedded Control Units are basic building blocks of

machine control systems. Each of the Control Units can

act as an independent control unit in smaller systems

or as a part in a total control system. They are compact

multifunction controllers, and have open I/O interfaces

which make it easy to connect sensors, actuators,

joysticks, and other devices from most common

manufacturers.

The design and unique shape of the control unit casing

works to protect the electronics inside against mechanical

wear. All control units are used in very hard environmental

conditions, thus it easily endures cold, heat, vibration,

moisture, and impacts. Control units can handle impacts

up to 100G, and are water and dust proof according to IP67.

This, and the functional design of the control unit casing,

also makes the installing easy as the control unit seldom

requires any extra protection.

The type of each input is determined by the PLCopen

the control unit. The control unit is PLCopen programmable

which makes the programming easy and convenient,

shortening development time for new systems. CoDeSys

programming tool provides an easy graphic environment

for developers to work with.

Epec uses gold plated, heavy duty, AMPSEAL connectors,

which are convenient to install into the machine, both

corresponding place. The connector type is specially

designed for wire harness use in volume production.

Two CAN bus interfaces increase the possibilities of

connecting other CAN devices with the control unit. They

also provide a communication solution for the control

system’s internal communication. With two CAN bus

interfaces, these control units are also capable to work as

a gateway between two different CAN buses. CANopen ®

communication protocol provides easy communication

with other CANopen® devices, and with SAE J1939

communication protocol all the communication with

modern diesel engines and transmissions etc. is also easy.

With optional ISOBUS CAN protocol, Epec Control Units

make an ideal solution for agricultural machines too.

Embedded Control Units

Epec 2024 Control UnitEpec 2024 Universal Control Unit is a compact multifunction

controller and it has an optimized number of both input and

output pins to be used for numerous roles in the control system.

The total number of I/O pins is 52, including digital inputs and

outputs, analog inputs, pulse inputs, proportional (PWM) outputs,

and current feedback inputs.

Product order code(Analog inputs are pulled up and down)

E30B2024-10

isobussae j1939 e17 100g

6

Product order code(Analog inputs are centered)

E30B2024-20

7

Epec 2023 Control UnitThe I/O interface in the 2023 Control Unit is optimized for

cabin use, thus it has inputs suitable to connect two, 3-axis

joysticks and several digital inputs to accommodate switches,

keys, etc. typical in a cabin environment. In addition, it has the

ability to connect keyboard matrices to it. In addition to the

vast number of inputs, the control unit has a number of digital

outputs and proportional (PWM) outputs for direct connections

to surrounding devices.

Product order code E30B2023-10

Epec 2020 Control UnitEpec 2020 Control Unit is a compact and rugged control unit

for embedded control systems. The I/O interface of the control

unit is specially optimized for hydraulic controlling as it has a

vast number of proportional (PWM) outputs to connect hydraulic

devices from most common manufacturers. To further increase

the accuracy of hydraulic control, the control unit has current

feedback inputs for feedback signals, e.g. hydraulic valves.


connectors 3 x AMP23 1 x AMP8operating temperature -40 ... +70°Covervoltage protection 70 VDC

nominal operating voltage full operating range24 VDC 10 ... 30 VDCweight 0,7 kg

protection class sizeIP67 147 x 113 x 46 mmprocessor programmingapplication sizeC167 40 MHz PLCopen256 kbyte

universal control unit 2024 , control unit 2023 , control unit 2020

4 x DI 4 x AI/FB 24 x PWM/DO/DI (sourcing) 8 x AI/DI 4 x DI/DO (sinking) 8 x DI/PI2024

16 x DI/PI 16 x AI/DI 4 x DI/DO (sinking) 8 x PWM/DO/DI (sourcing)2023

2 x 10 x AI/FB 24 x PWM/DO/DI (sourcing) 8 x DI/PI 6 x AI/DI 1 X DI2020

communications 2 x CAN

i/o pins total 52 5920202024 & 2023

isobussae j1939 e17 100g isobussae j1939 e17 100g

i/o interface, configuration example

8 x PWM/DO/DI (sinking)

8

Shock cover for Epec control units

All Epec control units are designed to endure very hard

environmental conditions. When the control unit is mounted in

such a place where it might get impacts from dropping items,

someone stepping on it, or where it is exposed to possible water

spray, a special shock cover is used to protect connectors and wire

attachment points. The shock cover is mounted on the control

unit by using two special M6 bolts. The cover does not increase

on connectors. A special wire bracket is typically mounted under

the control unit. Bolts are tightened to attach the bracket and the

control unit to their places and the shock cover is mounted on top

of them for extra protection.

Epec 2038 Mini Control UnitEpec 2038 Mini Control Unit is the smallest control unit with 20

I/O pins for embedded control systems. The control unit is used

independently in smaller machines or with other control units

in larger systems. With the help of the 2038 Mini Control Unit it is

possible to even further deepen the distribution of intelligence

around the machine by locating the control unit next to connectable

sensors, actuators, and other devices spread around the machine.

There are two variations of this control unit. One variation of this

control unit has two CAN bus interfaces. The other variation has CAN

bus and RS232 serial interfaces.

Product order code for CAN+RS232 version E30B2038-10

Product order code for CAN+CAN version E30B2038-20

Acc

esso

ries

Product order code for shock cover E30C02192

(Including wire mounting bracket and mounting bolts)

4 x DI/PI 3 x AI/FB/DI 2 x PWM/DO/ DI (sourcing) 6 x AI/DI 1 x DI/DO (sinking)

34 VDCnominal operating voltage full operating range24 VDC 9 ... 30 VDC overvoltage protection

connectors 1 x AMP23 1 x AMP8operating temperature -40 ... +70°C

protection class size weightIP67 147 x 63 x 53 mm 0,5 kg

processor programmingC167 40MHz PLCopen256 kbyte

mini control unit 2038

communications 2 x CAN or 1 x CAN + 1 x RS232i/o pins total 20

application size

isobussae j1939 100g

i/o interface, configuration example 4 x DI/DO/PWM/PI (sourcing)

9

2 x DI 2 x DI/PI 6 x AI/DI 2 x PWM/DO (sourcing) 1 x FB

connectors 1 x AMP23 1 x AMP8operating temperature -10 ... +50°Covervoltage protection 30 VDC

nominal operating voltage full operating range24 VDC 9 ... 30 VDCsize weight147 x 63 x 53 mm 0,5 kg

protection class IP67processorresolution programming80C51128 x 64 pixels PLCopen25 kbyte

mini display 2029

communications 1 x CAN 1 x RS232i/o pins total 13

Epec 2029 Mini Display

Epec 2029 Mini Display Unit is a 2.4” black and white graphical

LCD display unit with some I/O interface for direct control

purposes. The display unit can be used as a stand alone solution to

control smaller machines or as a user interface unit in a larger

control system. When mounted in the cabin, the display unit can

be installed either embedded in the dashboard panel or with an

adjustable mounting pedestal on e.g. the arm rest of the operator

chair.

The display unit is programmed by using CoDeSys in a PLCopen

environment.

The display unit has protection class of IP65 and high tolerance

against vibration and impacts, making it a suitable user interface

module for a typical mobile machine environment. Heavy

duty AMPSEAL connectors ensure the secure connections for

communications and I/O pins.

Mounting pedestal for Epec Mini Display Unit

The pedestal is mounted to its place by using one 3/8” screw in its base. The display is

attached by its underside to the mounting pedestal with an 1/4” screw.

Epec product code MK0064

Acc

esso

ries


Epec product code E3002029-10

application size

100g

10

Epec 2040 Color Display,release 3.0Simple interaction and usage of a machine are key elements in any

machine application. Freely programmable graphical user interface

provides an opportunity to maximize machine usability and

an ideal solution for heavy duty applications like mining machines,

excavators, forest machines, wheel loaders etc. Fully enclosed

aluminum housing provides water and dust proof operation

according to IP66. The temperature ranges from -20 ° C to +60 ° C.

The 2040 Color Display is equipped with two CAN bus interfaces, a

and USB interface via AMPSEAL connectors, thus allowing the display

to be connected as an integral part of the embedded machine control

when using C programmed applications, it is also possible to connect

an external user wheel or a standard USB mouse to further enhance

the user experience.

Ethernet can be used to connect the machine to upper level

information systems, such as databases for monitoring production,

enterprise resource planning (ERP), etc.

The 2040 Color Display is fully programmable display unit and

CoDeSys Visualization makes programming very easy. This

graphical windows tool can be used to design display gauge meters,

icons, buttons, texts, etc. Typically the display application may have

several dozens of windows, and is used to adjust and store system

parameters, application back up copies, system event logs etc.

The display supports also feature where two separate displays are installed in the same machine. For C-programmable displays

Epec product code for C-programmable display

with RS232 E3002040-50

Epec product code for C-programmable display with RS485/422 E3002040-60

Epec product code for CoDeSys Visualization

programmable display with RS232 E30B2040-10

Epec product code for CoDeSys Visualization programmable display with RS485/422 E30B2040-20

ethernetusb 50ge17

color display 2040


protection class IP66programming PLCopen / Coperating system linux

resolution processor memory ARM9 180 MHz 64 Mbyte /64 Mbyte /512 kbyte

communications 2 x USB 1.1 1 x ethernet 10/100 1 x RS232/RS422/RS485 CAN1 CAN2 (optically isolated)

size weight181 x 120 x 53 mm 1,0 kg

nominal operating voltage full operating range24 VDC 11 ... 30 VDC overvoltage protection 70 VDC

2 x DI/DO 3 x DI i/o pins total 5

320 x 240 pixels

Epec product code for Remote Connectivity License

MN0276

Epec product code for Modbus/TCP Slave License for C-programmable display MN0277


licenses for Remote access library and Modbus/TCP Slave

communication are available as an option.

system. The display has five integrated push buttons for operating, and, system. The display has five integrated push buttons for operating, and,

11

User Wheel

2040 Display application

(created with C language) can be

operated with an external User

Wheel which is connected with

the display I/O pins in AMP23

connector. This User Wheel makes display operation very fast and

easy. With the 360 degrees rotating wheel one is able to scroll

through buttons and parameter values, and with two selection

operate.

Product order code E40001505Shock absorber frame for 2040 Display

A special protector cover made of black

rubber may be used on the display to

protect it from impacts. The rubber frame

Mounting Pedestal Manfrotto for 2040 Display

The pedestal is mounted to its place

by using one 3/8” screw in its base. The

display is attached by its backside to the

mounting pedestal with four M4 screws.

Product order code E30801288

The pedestal has rotating ball heads

at both ends, so it it easy to adjust

according to individual needs. The

by two screws and the upper end to the

display by screws and an adapter plate.


Connection Cover for 2040 Display

A connection cover with full connector

housing for 2040 Display is also

available. The cover has a standard

Ethernet connector, two USB connectors,

serial connection and AMP8 connector

on the bottom and left hand side. 2040

Connection Cover also has an integrated

buzzer which can be controlled by the

The cover is attached to the back side of the 2040 display

with four M5 screws and it covers nicely the AMP8 and AMP23

connectors on display’s backside.


Accessories

Mounting Pedestal RAM for 2040 Display

The pedestal can be adjusted easily to

suit individual needs according to each

driver/machine operator.

Product order code MK0086

application software.

is simply streched over the display leaving

a soft keys accessible.

12

Epec 2021 Hub Unit is a compact and robust communication

and control unit for mobile machines. Small outside

makes installing easy.

Star topology in CAN bus is not often seen in embedded control

systems, but with the 2021 Hub Unit it is used to further

increase the safety and reliability of the embedded control

system. With the help of the hub unit, the system designing

and installing is easy as the hub distributes both CAN bus and

the power supply for the whole control system. This enables extra

safety features to be built into the system as the hub unit is

able to monitor the condition of the communication and power

supply wiring, as well as the power consumption of the whole

system. When the system power is distributed via the hub

unit, it is able to protect more sensitive devices connected to it

from e.g. overvoltage peaks.

The Hub Unit is PLCopen programmable and also has some

digital inputs and outputs which can be used to connect all the

surrounding devices with it.

Epec 2021 Hub Unit has two CAN bus connections spread

devices with it. CAN connections are CANopen® compatible and

user programmable, located securely in gold plated AMPSEAL

connectors. The hub unit can also be used to connect e.g.

SAE J1939 devices; engines, transmissions, etc. with the embedded

control system. In addition to the CAN bus interface, the hub unit

provides serial communication (RS485) interface for other devices.

With its versatile CAN connections, the 2021 Hub Unit

withdraws the need for separate CAN gateway units in the control

system, as the Hub Unit itself is able to act as a gateway

between different CAN buses.

The unique design of the 2021 Hub Unit, as with other Epec

control units gives them very good endurance against impacts

and mechanical wear.


Epec 2021 Hub Unit

nominal operating voltage full operating range24 VDC 10 ... 30 VDC

6 x DI/PI 2 x PWM/DO/ DI/PI 2 x AI/DIconnectors 1 x AMP23 4 x AMP8

operating temperatureovervoltage protection -40 ... +70°C70 VDC


processor programmingC167 20 MHz PLCopen256 kbyte

hub unit 2021

communications 7 or 8 x CAN1 1 or 2 x CAN2 1 x RS485i/o pins total 12

application size

sae j1939 e17 100g


13

Product order code E3002033-10

Epec 2033 Power Switch Unit

power switch unit 2033


overvoltage protection 70 VDC


e17 100g

processor programming80C51 CANopen slave

5 x PWM/DO 5 x DO 3 x DI 1 x AI/DI


communications 1 x CANi/o pins total 14

Epec CANopen Slave Products

Epec 38 CANopen® Slave M1

Product order code E30S2038


34 VDCovervoltage protection


processor programmingC167 40MHz CANopen slave

38 canopen® slave m1

4 x DI/PI 3 x AI/FB/DI 6 x DI/AI

connectors 1 x AMP 23 1 x AMP 8

operating temperature -40 ... +70°C

communications 1 x CANi/o pins total 20

2 x DI/DO/PWM (sourcing) 1 x DI/DO (sinking) 4 x DI/DO/PWM/PI (sourcing)


e17 100g

Epec 2033 Power Switch Unit can be used to control high currents up to 40 A. By using the 2033 Unit instead of typically used high current relays, one is able to save valuable space, reduce mechanical failure possibilities, and itegrate all the controllingseamlessly with the machine control system. Everything happens easily and automatically controlled by the total control system.The 2033 Unit offers maximum continuous current up to 40 A,which is much more than typical units can offer.

Epec 38 CANopen® Slave M1 is a versatile control unit for a CAN based control system with a very small footprint and highly

The 38 Slave Unit is one of the smallest control unit available for embedded control systems, yet offers a considerable amount (20 pc.) of controllable I/Os. The 38 Slave Units are easy blocks for creating embedded control systems or to expand the I/Os of an active control unit.


Epec CANopen® Slave Units product family consists of Epec 2033 Power Switch Unit and 38 CANopen® Slave M1. These reliable, robust and easy-to-use generic I/O slaves answer the ever increasingdemand to integrate all machine functions with intelligent machine control and they can be used as CANopen® slave with DS401 profile.

The slave units operate in a wide temperature range and are also very easy to mount due to their compact size. The Epec CANopen® slave units´total robustness and snap-in AMP connectors also give you plenty of scope for a flexible mounting.

flexible configuration capabilities.

AMP 8-pin black plug assembly (female) is used as a power

supply and communication connector in Epec control units.

14

Each connector is also sold together with ready made flying leads

General accessories for control units and displays

AMP 23-pin and 8-pin plug assemblies

AMP 23-pin plug assembly (female), manufactured by Tyco

Electronics, is used as an I/O connector in Epec control units.

into the equivalent color connector of the Epec control unit.

Available separately or in manufacturer’s packages with

224 pcs/package.

AMP 23-pin plug assembly, grey

AMP product code 770680-4

Epec product order code KX0007

AMP 23-pin plug assembly, black



AMP 23-pin plug assembly, blue



Flying leads

with lenght of 2 m.



Connectors are fully sealed against water and dust (IP 67)

and they may house up to 8/23 connector pins which are

Epec uses sealed, heavy duty connectors with all embedded

control units and displays. These connectors ensure the

highest possible protection against moisture and dust.

They are also very suitable for using wire harnesses. Each

connector part is gold plated to ensure endurance against

corrosive environment.

available separately. Plugs are mechanically keyed to fit only

AMP 8-pin plug assembly, black

Epec product order code

E30901310


E30901311


E30901312


E30901313

AMP gold plated connector pins

AMP connector pins, manufactured by Tyco Electronics, are used

in AMP plugs connected with Epec control unit connectors.

Each connector pin can be used with currents

up to 17 amperes. An AMP hand

crimping tool is used to crimp

connectors with wires (AMP

Procrimper 58529-1). Connector

pins are available separately or

in manufacturer’s packages with

1000 pcs/package.



AMP 23-pin plug assembly, grey with 2 m leads

AMP 23-pin plug assembly, black with 2 m leads

AMP 23-pin plug assembly, blue with 2 m leads

AMP 8-pin plug assembly, black with 2 m leads

15

Epec Simulator Box

Product order code for 2024 control unit E3003503

Product order code for 2020 control unit

Product order code for 2023 control unit

roduct order code for 2038 control unit

E3003503-20

Epec Simulator Box for system designers enables simulatingthe control system’s operations easily. It is possible to connect external actuators / sensors using the Simulator box’ banana connectors. You can also connect external CAN devices or concatenate multiple control units using the Simulator Box’

The control system to be simulated can be changed quickly: just print out new I/O labelstrips for the new system and load appropriate programs into control units.

AMP8 or D9 connectors.

3500 CAN Adapter Box

This, easy to use, connector cable is for system developers. It

provides connection for both CAN1 and CAN2 via AMP8 and

Dsub9 connectors. 3500 CAN Adapter box is used to connect

power supply to control units and displays, and to connect a CAN

bus adapter from PC into CAN network.

Plugs of a power supply and Dsub9 connector of a CAN card are

connected with the adapter, and the AMP8 is connected with a

control unit’s or display’s AMP8 connector.

Epec product order code E3003500

easy start up kit

Start up kit includes necessary accessories like cables, connectors,

adapters, and software to start programming with PLCopen of

Epec Products. The user should have preliminary knowledge

of CANbus and PLCopen programming to get a good start with

the products. Control units and displays are sold separately.


E3003503-10

E3003503-30

commitment to your continuous success

iso 9001 and iso 14001 certified company epec product catalogue | 2010 edition

Palki Automation Technology Co.,Ltd.

address: Room 1201, Tower No.1, Xindongzhiye Building, No.388 Xinfu Road, Minhang District, Shanghai, China

p: +86 21 50103961 50103692 | fax: +86 21 52967635

E-mail: [email protected] | Website: www.palkitech.com

Documents

product catalogue - PALKI - 精密运动测控伙伴 · 2014-09-20 · With optional ISOBUS CAN protocol, Epec Control Units make an ideal solution for agricultural machines too