Embed Size (px)
Citation preview
Pico NodeB
7030 Hi Tech Drive Hanover, MD 21076, U.S.A. + 1.410.872.6500 [email protected] www.Tecore.com
The Pico NodeB is a fully self contained pico cell radio base station that enhances coverage and capacity in 3G (UMTS) system. It connects to the UTRAN network using the IuB interface. This single base station can provide 250 mW power output and feature a capacity of up to 80 users and 6kg (13lb) in weight.
The product is designed for indoor use. It’s compact size and light weight allows deployment flexibility during installation. The intuitive design also accommodates a low power consumption and uses self-convection cooling, offering a noise free operation.You can use the internal antenna or use external antennas to tailor the coverage characteristics. This pico base station is powerful enough to support High speed package access (HSPA) and also cost-effective to support coverage in low traffic areas. This single NodeB offers both coverage and capacity benefits
Features and BenefitsKey Features
• Radio Access and Modem Processing
• Interfaces the RNC via the 3GPP IuB
• Network Interface Transmission
• Configuration and Supervision
• Performance Monitoring
• One carrier, one sector
• Local Management
• Synchronization
• Traffic Control
Key Benefits
• Limits the impact of hot spots on macro network planning assumptions
• Offers flexible deployment scenarios to meet in-building needs
• Provides high capacity spot coverage
• Low cost and ease of deployment
• Solves key network challenges
• Full O&M support
Product Excellence
7030 Hi Tech Drive Hanover, MD 21076, U.S.A. + 1.410.872.6500 [email protected] www.Tecore.com
To learn more about our technology, products, and services, call us at +1.410.872.6500
or visit us at www.tecore.com ©Tecore Inc.*Features and prices are subject to change
Pico NodeB Specifications
ConnectorsLabel Interface Type of ConnectorTx/RxA Antenna connector A Antenna RF, Tx/
RxAQMA
RxB Antenna connector B Antenna RF, RxB QMA
DC-Power Power supply 12 VDC Mini Fit JR
Aux BTS consol RS485 DSUB-9
External Alarm
External alarms con-nector
4-pos terminal block
Test Test (not used) RJ11
Ethernet Transmission connector
Ethernet100 BASE-TX
RJ45
TechnicalSupply voltage Single phase 90 - 135/185 - 264VAC, 47-63Hz
Withstands 20 ms interruption of AC input at 230V
Power consumption < 70W
Cable length 1.8 m (supplied with OneBASETM)
Dimensions (mm) 285 H x 440 W x 110 D
Weight 6kg main unit8kg including AC/DC and internal antenna
Vandalism proof TORX screws. Possible to lock with padlock
Air interface UMTS (WCDMA), FDD3GPP release 99 and release 6 compliant
Frequency Range 2110 - 2170MHz downlink1920 - 1980MHz uplink
Carrier One carrier, 5MHz
Maximum output power 250mW ±2dB, Local Area BS Class
Frequency reference source
ATM version: Incoming network interface linkEthernet version: NTP server located in transport network
Frequency accuracy ±0.1ppm
Modem capacity Pico 80 (83 CE downlink, 82 CE uplink)Pico 40 (83 CE downlink, 42 CE uplink)
Internal Antenna (option)Antenna Gain 7 dBi
Polarization Dual Slant ±45°
Half Power Beam width 70° horizontal, 70° vertical
EnvironmentalOperating Temperature -5° to +45°C
Storage Temperature -45° to +70°C
Relative Humidity <95%
Sealing class (according to EN60529)
Complete Installation IP 30Main Unit IP 51
Standards compliance IEC 60 721-3-3 “Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 3: Stationary use at weather protected locations”, classes 3K3/3Z2/3Z4/3Z7/3B1/3C2/3S2/3M1.
Transmitter CharacteristicsGuaranteed Values Typical Values
Frequency Band Band I version 2110 - 2170 MHz N/A
Max Output Power 250mW per carrier, ± 2dB 250mW, ± 1dB
Frequency Accuracy ± 0.1 ppm ± 0.050ppm
Output Power Dynamics Max code domain power > -3dB > -3dB
Min code domain power < -28dB < -32dB
Dynamic range > 18dB 20dB
RF Spectrum Emissions
ACLR limit at ± 5MHz 45dB 50dB
ACLR limit at ±10MHz 50dB 58dB
Error Vector Magnitude < 12.5 % 5%
Receiver CharacteristicsGuaranteed Values Typical Values
Frequency Band Band I version 2110 - 2170MHz N/A
Sensitivity Level -107dBm -110dBm
Dynamic Range -18dBm -19dBm
Adjacent Channel Selectivity 63dB 83dB
Blocking In Band 71dB > 100dB
Out of Band 86dB > 100dB
Intermodulation In Band 63dB 68dB
