Product Guide INEX BOARDS - Shoalhaven Brick and Tileshoalhavenbrickandtile.com.au/.../IB-Inexboards-ProductGuide-NAT.pdf · compliant in accordance with AS3959-2009 construction

INEX BOARDS™

Product Guide

ANY BUILDINGANY SURFACEANYWHERE

2 Product GuideINEX BOARDS™

Product Guide 3INEX BOARDS™

INEX>BOARDS provide a range of high performing, lighter weight materials for the construction industry. INEX>BOARDS offer a superior, yet price competitive, environmentally friendly alternative to fibre cement and plasterboard products.

Critically the products are both low carbon and high performing, whilst at the same time being affordable, delivering to the construction industry a better, safer and cost-effective solution.

Below we summarise some of the benefits of INEX>BOARDS:

Low Carbon INEX>BOARDS minimise harm to the planet in their production which is undertaken at room temperature. The embodied energy of our board is about 40% to that of comparable fibre cement boards.

Strength INEX>BOARDS is manufactured to an equilibrium bending strength of 22MPa.

Fire Resistance Tests demonstrate that INEX>BOARDS are non-com-bustible, BAL-FZ and FRL 60/60/60 rated. Performance data available at www.inexboards.com.au.

Durability INEX>BOARDS can be used in all climatic conditions – rain, snow, frost, varying humidities and extreme temperatures.

StabilityTests demonstrate that INEX>BOARDS can retain over 80% of the dry strength after 25 soak-dry cycles.

Acoustic Resistance Tests demonstrate an acoustic attenuation of Rw5 higher than that of standard plasterboard products. At 10mm thickness INEX>BOARDS provide a similarattenuation as 13mm thick sound rated plasterboard.

Water Resistance INEX>BOARDS have a high level of water resistance and conform to the requirements of the Water Permeability Test.

Impact Resistance INEX>BOARDS offer high impact resistance – greater than that of traditional compressed fibre cement sheets or impact resistant plasterboards currently on the market.

Radiation Shielding Tests show enhanced electromagnetic radiation shielding properties.

Healthier Living INEX>BOARDS are non-toxic, provide enhanced breathability and inhibit mould.

INEX BOARDS™


INEX>FLOOR is a high strength lightweight flooring substrate with tongue and groove (T&G) edges. It can be used for external or internal applications; as a substrate for most finishes such as tiles, vinyl, carpet or timber. INEX>FLOOR can be used in conjunction with floor systems to achieve up to BAL-FZ bushfire compliance. INEX>FLOOR is simplicity itself. A single affordable product for multiple flooring applications.

INEX>FLOORTM

The textured surface of INEX>DECKING provides a superb surface for a wide range of approved coating systems.INEX>DECKING has pencil round edges along the length of the board. INEX>DECKING is suitable for all decking applications, where the required Live Load is not greater than 1.8kN and a uniformly distributed load of not greater than 3.0 kPa

INEX>DECKINGTM

INEX>MAXIDECKTM

INEX>LAMIDECKTM

INEX>MAXIDECK is ‘decking by the sheet’ and comes with grooves routed into its surface to deliver an authentic decking board appearance. Each INEX>MAXIDECK sheet represents 5 x 120mm wide individual decking boards, thereby cutting the installation time to less than 20% of what it would be if individual boards were used. INEX>MAXIDECK is suitable for all decking applications, where the required Live Load is not greater than 2.7kN.

INEX>LAMIDECK is a high strength lightweight laminated flooring sheet for all decking applications, providing a concentrated Live Load up to 13kN and a Uniformly Distributed Load up to 75kPa. INEX>LAMIDECK is ideal to be used as flooring for pedestrian walkways, lightweight bridges, warehouse storage areas, domestic garages and carports.

Product Range


INEX>EXPRESS is ‘facade by the sheet’ and comes with grooves routed into its surface to deliver an authentic timber board appearance without the fuss of having to lay individual decking boards. Each INEX>EXPRESS sheet represents 5 x 120mm wide individual timber boards, thereby cutting the installation time to less than 20% of what it would be if individual boards were used.

A great innovation that delivers a lightweight render substrate board suitable for multiple render coating applications. 16mm thick INEX>RENDERBOARD sheets are tongue and grooved to lock together and resist any render cracking over time. INEX>RENDERBOARD comes with a fire rating of FRL 60/60/60 and a bushfire attack level BAL-FZ – and both of these

INEX>EXPRESSTM

INEX>RENDERBOARDTM

INEX>WEATHERBOARDTM

INEX>WALLBOARDTM

INEX>WEATHERBOARD’s 16mm thickness provides a deep shadow below each board. Suitable for multiple paint and timber stain (rough sawn finish only) applications. Each board is 3 metres long with tongue and grooved ends for off stud jointing. Critically, INEX>WEATHERBOARD comes with a fire rating of FRL 60/60/60 and a bushfire attack level BAL-FZ – and both of these ratings WITHOUT the need for any other fire rated materials.

INEX>WALLBOARD comes with both square and recessed edges to suit different joint and setting requirements. The smooth side of INEX>WALLBOARD provides a superior surface finish for paint applications. The reverse side of INEX>WALLBOARD has a textured surface designed for roll-on texture coating systems. Superior to compressed fibre cement sheeting, INEX>WALLBOARD can be finished in its beautiful raw form by applying a clear sealer.

Product Range


Product InformationINEX FLOOR™

*Subject to availability or special order only.

PRODUCT LENGTH (mm) WIDTH (mm) THICKNESS (mm) Kg/m2 Kg/Sheet

INEX>FLOOR 16 2700 600 16 20.7 34INEX>FLOOR 16 2400* 600 16 20.7 30INEX>FLOOR 16 1800 600 16 20.7 22

INEX>FLOOR 19 2700 600 19 24.6 40INEX>FLOOR 19 2400* 600 19 24.6 35 INEX>FLOOR 19 1800 600 19 24.6 27

WEIGHTAt approx. 34kg (16mm) or 40kg (19mm) per sheet the INEX>FLOOR sheets are lightweight and easy to handle on site.

HIGH PERFORMANCEINEX>FLOOR can be cut and worked just like comparable fibre cement sheets, but offers improved bending strength characteristics and superior finish quality.

NON-COMBUSTIBILITY & FRLINEX>FLOOR is non-combustible and can be used in conjunction with floor systems to achieve FRL 90/90/90 in the down direction and up to BAL-FZ bushfire compliance. Refer to our INEX>FLOOR Floor Systems brochure.

ACOUSTICINEX>FLOOR offers remarkable acoustic insulation performance. Our floor system for Class 2 or 3 Type A construction on timber or steel frame delivers an Rw/Rw+Ctr of 62/58 (BCA for Rw+Ctr is >50).

VALUEINEX>FLOOR is priced for value for the construction industry and competes strongly against all comparable products. For pricing, refer to www.inexboards.com.aufor your nearest stockist.

RECYCLABLE AND TOXIN FREEINEX>FLOOR is recyclable and is non-toxic.

Note: Refer to the Flooring Applications Technical Manual for further information.

INEX>FLOOR for Tiled Decks and Balconies

FRL 90/90/90

BAL-FZ


INEX>FLOOR as the substrate for the Royal Randwick Racecourse Entertainment Facilities.

Selecting the right flooring product just got a whole lot simpler!INEX>FLOOR replaces the many flooring products that are available and can be used in internal and external applicatons.

Compressed Fibre CementFlooring (CFC)

CFCInternal Conditions

CFCExternal Conditions

Particle Board with aYellow tongue

Particle Board with aBlue Tongue

Particle Board with aRed Tongue

Oriented Strand Board(OSB)

Substrate forCarpet

Substrate forTiles

INEX>FLOOR

Substrate forTimber

Substrate forVinyl

Plywood‘A’ Bond or Marine Grade

Acoustic Dampening

Flame or Smoke Resistant

Polished Concrete like Surface


Product InformationINEX DECKING™

PRODUCT LENGTH (mm) WIDTH (mm) THICKNESS (mm) Kg/m2 Kg/Length INEX>DECKING 2700 140 19 24.6 9

WEIGHTAt approx. 9kg per length, INEX>DECKING is relatively lightweight and easy to handle on site.

HIGH PERFORMANCEINEX>DECKING can be cut and worked just like comparable fibre cement sheets, but offers improved bending strength characteristics and finish quality. INEX>DECKING spans over joists at maximum 450mm centres.

BAL-FZ & NON-COMBUSTIBILTY INEX>DECKING is deemed non-combustible under AS1530.1 and is therefore approved for all Bushfire Attack Levels including BAL-FZ construction in accordance with AS3959-2009.

MOISTURE RESISTANCEINEX>DECKING is moisture resistant and retains its structural integrity when subjected to multiple soak/dry cycles in accordance with clause 8.2.5 of AS/NZS 2908.2 2000 ‘Cellulose-cement products Part 2: Flat sheets’.

DURABILITYINEX>DECKING is highly durable and represents a real alternative to natural timber. INEX>DECKING can be coated to achieve the timber look, without the ongoing maintenance issues of natural timber.

RECYCLABLE AND TOXIN FREEINEX>DECKING is recyclable and is non-toxic.

MOULD & TERMITE RESISTANCEINEX>DECKING is resistant to mould and termite attack.

Note: Refer to the Decking Applications Technical Manual for further information.

BAL-FZ


Product InformationINEX MAXIDECK™

BAL-FZ

PRODUCT LENGTH (mm) WIDTH (mm) THICKNESS (mm) Kg/m2 Kg/Sheet INEX>MAXIDECK 2700 600 16 20.7 34

INEX>MAXIDECK installed and coated

INEX>MAXIDECK in the raw.

Tongue & Groovejoint between sheets

WEIGHTAt Approx. 34kg per sheet INEX>MAXIDECK is relatively light weight and easy to handle on site.

HIGH PERFORMANCEINEX>MAXIDECK can be cut and worked just like comparable fibre cement sheets, but offers improved bend-ing strength characteristics and finish quality. INEX>MAXIDECK spans over joists at maximum 450mm centres.

BAL-FZ & NON-COMBUSTIBILTYINEX>MAXIDECK is non-combustible and is approved for all Bushfire Attack Levels including BAL-FZ*.As there is no spacing between individual decking boards, INEX>MAXIDECK is BAL-FZ compliant in accordance with AS3959-2009 construction of buildings in bushfire prone zones.

*BAL-FZ (Flame Zone) is the highest Bushfire Attack Level where there is an extremely high risk of ember attack and burning debris ignited by windborne embers, and a likelihood of exposure to an extreme level of radiant heat and direct exposure to flames from the fire front.

MOISTURE RESISTANCEINEX>MAXIDECK is moisture resistant and retains its structural integrity when subjected to multiple soak/dry cycles in accordancewith clause 8.2.5 of AS/NZS 2908.2 2000 ‘Cellulose-cement products Part 2: Flat sheets’.

DURABILITYINEX>MAXIDECK is highly durable and represents a real alternative to natural timber. INEX>MAXIDECK can be coated to achieve the timber look, without the ongoing maintenance issues of natural timber.

VALUEINEX>MAXIDECK is an affordable substitute to hardwood and/or other decking composites. Each INEX>MAXIDECK represents 5 x 120mm wide individual decking boards, thereby cutting the installation time to 20% of what it would be if individual boards were used.

RECYCLABLE AND TOXIN FREEINEX>MAXIDECK is recyclable and is non-toxic.

MOULD & TERMITE RESISTANCEINEX>MAXIDECK is resistant to mould and termite attack.


Product InformationINEX LAMIDECK™


INEX>LAMIDECK 32 1800 600 32 40 43

INEX>LAMIDECK 32 2400 600 32 40 58

INEX>LAMIDECK 32 2700 600 32 40 65

NON-COMBUSTIBILTY & BAL-FZINEX>LAMIDECK is deemed non-combustible under AS1530.1 and is approved for all Bushfire Attack Levels including BAL-FZ* construction in accordance with AS3959-2009.

PRE-SEALED SURFACESAll exposed surfaces of an INEX>LAMIDECK sheet come pre-sealed.

COATING SYSTEMINEX>LAMIDECK can be coated with a wide range of colours. Refer to the COATINGS menu at www.inexboards.com.au for approved coating systems.

ANTI-SLIP COATINGIf required, INEX>LAMIDECK can be top coated with our uniquely developed anti-slip coating system which delivers a P5 rated slip resistance.

RECYCLABLE AND TOXIN FREEINEX>LAMIDECK is recyclable and is non-toxic.

Note: Refer to the Flooring Applications Technical Manual for further information.

INEX>LAMIDECK was used by Brisbane City Council for the Bicentennial Bikeway upgrade.

BAL-FZ


Product InformationINEX RENDERBOARD™

WEIGHTAt approx. 33kg (16mm) INEX>RENDERBOARD is lightweight and easy to handle on site.

HIGH PERFORMANCEINEX>RENDERBOARD can be cut and worked just like comparable fibre cement sheets, but offers improved bending strength characteristics and finish quality. INEX>RENDERBOARD can be fixed to timber or steel studs with spacing at maximum 600mm centres.

FRL, BAL-FZ & NON-COMBUSTIBILTYINEX>RENDERBOARD is non-combustible and is approved for all Bushfire Attack Levels including BAL-FZ*, and is certified to a Fire Rating Level (FRL) of 60/60/60.

ACOUSTICINEX>RENDERBOARD on a timber or steel frame with R2.5 insulation and 10mm plasterboard internal lining will deliver a sound insulation value of Rw/Rw+Ctr of 54/45, which will satisfy all Categories of Transport Noise Corridors for external wall requirements.

EASE OF USE AND HANDLINGINEX>RENDERBOARD does not require any speciality tools or fixings. It can be ‘off stud’ joined thereby minimising waste on site.

MOISTURE RESISTANCEINEX>RENDERBOARD is moisture resistant.

DURABILITYINEX>RENDERBOARD is long-term durable and is warranted for 20 years.INEX>RENDERBOARD remains dimensionally stable as a wall cladding material.

RECYCLABLE AND TOXIN FREEINEX>RENDERBOARD is recyclable and is non-toxic.

MOULD & TERMITE RESISTANCEINEX>RENDERBOARD is resistant to mould and termite attack.

VALUEINEX>RENDERBOARD is priced for value for the construction industry and competes strongly against all comparable products. Pricing is available on application to UBIQ or its distributors.

Note: Refer to the Exterior Applications Technical Manual for further information.

PRODUCT LENGTH (mm) WIDTH (mm) THICKNESS (mm) Kg/m2 Kg/Sheet INEX>RENDERBOARD 2700 600 16 20.5 33

Delivers a render finish like no other.

FRL 60/60/60

BAL-FZ

Product InformationINEX EXPRESS™


INEX>EXPRESS 3000 600 16 20.7 40

INEX>EXPRESS 2700 600 16 20.7 34

WEIGHTAt approx. 40kg or 34kg per sheet INEX>EXPRESS is relatively light weight and easy to handle on site.

HIGH PERFORMANCEINEX>EXPRESS can be cut and worked just like comparable fibre cement sheets, but offers improved bending strength characteristics and finish quality. INEX>EXPRESS spans over frame supports at maximum 600mm centres.

FRL, BAL-FZ & NON-COMBUSTIBILTYINEX>EXPRESS is non-combustible and is approved for all Bushfire Attack Levels including BAL-FZ*, and is certified to a Fire Rating Level (FRL) of 60/60/60.

*BAL-FZ (Flame Zone) is the highest Bushfire Attack Level where there is an extremely high risk of ember attack and burning debris ignited by windborne embers, and a likelihood of exposure to an extreme level of radiant heat and direct exposure to flames from the fire front.

MOISTURE RESISTANCEINEX>EXPRESS is moisture resistant and retains its structural integrity when subjected to multiple soak/dry cycles in accordance with clause 8.2.5 of AS/NZS 2908.2 2000 ‘Cellulose-cement products Part 2: Flat sheets’.


INEX>EXPRESS in the raw.

Tongue & Groovejoint between sheets

INEX>EXPRESS installed and coated

FRL 60/60/60

BAL-FZ


DURABILITYINEX>EXPRESS is highly durable and represents a real alternative to natural or composite timbers. INEX>EXPRESS can be coated to achieve the timber look, without the ongoing maintenance issues of natural timber.

RECYCLABLE AND TOXIN FREEINEX>EXPRESS is recyclable and is non-toxic.

MOULD & TERMITE RESISTANCEINEX>EXPRESS is resistant to mould and termite attack.

VALUEINEX>EXPRESS is an affordable substitute to hardwood and/or other timber composites. Each INEX>EXPRESS represents 5 x 120mm wide individual decking boards, thereby cutting the installation time to 20% of what it would be if individual boards were used.

Critically, INEX>EXPRESS sheets form the walls themselves and can be fitted onto a steel or timber frame. As such they are not a cosmetic addition to a finished wall as is the case with other such products delivering a similar appearance.


Product InformationINEX WALLBOARD™

Note: 10mm, 9mm, 7.5mm & 6mm thickness with: square, aris or recessed edge profiles available on request.

PRODUCT LENGTH (mm) WIDTH (mm) THICKNESS (mm) Kg/m2 Kg/Sheet EDGE

INEX>WALLBOARD 12 3000 600 12 15.9 29 ARIS

INEX>WALLBOARD 12 3000 1200 12 15.9 53 ARIS

INEX>WALLBOARD 12 3000 600 12 15.9 29 RECESSED

INEX>WALLBOARD 12 3000 1200 12 15.9 53 RECESSED

HIGH PERFORMANCEWhether impact, water, fire or acoustic performances are required, INEX>WALLBOARD delivers – and all in the one single board. NON-COMBUSTIBILTY & FRLINEX>WALLBOARD is non-combustible to AS1530.1 and is therefore suitable for Bushfire BAL-40 construction. Our NLB-162 Intertenancy Wall System uses only a single layer of INEX>WALLBOARD 12 either side, and yet achieves and FRL of –/60/60 with an acoustic rating of Rw+Ctr of 55.

DURABILITYINEX>WALLBOARD is long-term durable and is warranted for 20 years. It is suitable for both internal and external applications.

APPLICATIONSINEX>WALLBOARD is designed for paint or clear/sealed applications for all internal and external surfaces. Most proprietary express wall type façade systems can be adopted with INEX>WALLBOARD specified as the panel itself. RECYCLABLE AND TOXIN FREEINEX>EXPRESS is recyclable and is non-toxic. MOULD & TERMITE RESISTANCEINEX>WALLBOARD is resistant to mould and termite attack. It is a breathable product and promotes healthier living.

VALUEINEX>WALLBOARD is priced for value for the construction industry and strongly competes against all comparable products. Pricing is available on application.

Note: Refer to the Interior Applications Technical Manual for further information.

INEX>WALLBOARD 12 with aris edged butt joins and clear seal.FRL –/120/120

BAL-40


INSTALLATON INTERNAL APPLICATION ONLY

JOINT DETAIL OPTIONS

FRAMINGINEX>WALLBOARD can be fixed to timber or steel studs with spacing at maximum 600mm centres. Internal Applications only.Timber framing must be in accordance with AS 1684 – ‘Residential timber-framed construction’.Steel framing must be in accordance with AS 3623 – ‘Domestic metal framing’. Ensure framing is plumbed prior to fitting.

ASSEMBLYWe recommend INEX>WALLBOARD be PIN or SCREW fixed to wall studs. Alternatively, 3M tape can be used to adhere INEX>WALLBOARD directly onto wall studs or substrate, subject to tape manufacturer’s specifications.

TAPED & SETJOINT

20 M

IN

SQUARE BUTTJOINT

ARIS VJOINT

RECESSEDJOINT WITHPIN FIXINGS

20 M

IN

20 M

IN20

MIN

20 M

IN20

MIN

SMO

OTH

SID

E

RO

UG

H S

IDE

SMO

OTH

SID

E

RO

UG

H S

IDE

SMO

OTH

SID

E

RO

UG

H S

IDE

SMO

OTH

SID

E

RO

UG

H S

IDE

SMO

OTH

SID

E

RO

UG

H S

IDE

SMO

OTH

SID

E

RO

UG

H S

IDE

SMO

OTH

SID

E

RO

UG

H S

IDE

SMO

OTH

SID

E

RO

UG

H S

IDE

TAPED & SETJOINT

20 M

IN

SQUARE BUTTJOINT

ARIS VJOINT


20 M

IN

20 M

IN20

MIN

20 M

IN20

MIN

SMO

OTH

SID

E

RO

UG

H S

IDE

SMO

OTH

SID

E

RO

UG

H S

IDE

SMO

OTH

SID

E

RO

UG

H S

IDE

SMO

OTH

SID

E

RO

UG

H S

IDE

SMO

OTH

SID

E

RO

UG

H S

IDE

SMO

OTH

SID

E

RO

UG

H S

IDE

SMO

OTH

SID

E

RO

UG

H S

IDE

SMO

OTH

SID

E

RO

UG

H S

IDE

TAPED & SETJOINT

20 M

IN

SQUARE BUTTJOINT

ARIS VJOINT


20 M

IN

20 M

IN20

MIN

20 M

IN20

MIN

SMO

OTH

SID

E

RO

UG

H S

IDE

SMO

OTH

SID

E

RO

UG

H S

IDE

SMO

OTH

SID

E

RO

UG

H S

IDE

SMO

OTH

SID

E

RO

UG

H S

IDE

SMO

OTH

SID

E

RO

UG

H S

IDE

SMO

OTH

SID

E

RO

UG

H S

IDE

SMO

OTH

SID

E

RO

UG

H S

IDE

SMO

OTH

SID

E

RO

UG

H S

IDE

TAPED & SETJOINT

20 M

IN

SQUARE BUTTJOINT

ARIS VJOINT


20 M

IN

20 M

IN20

MIN

20 M

IN20

MIN

SMO

OTH

SID

E

RO

UG

H S

IDE

SMO

OTH

SID

E

RO

UG

H S

IDE

SMO

OTH

SID

E

RO

UG

H S

IDE

SMO

OTH

SID

E

RO

UG

H S

IDE

SMO

OTH

SID

E

RO

UG

H S

IDE

SMO

OTH

SID

E

RO

UG

H S

IDE

SMO

OTH

SID

E

RO

UG

H S

IDE

SMO

OTH

SID

E

RO

UG

H S

IDE


Saké Restaurant & BarDouble Bay NSW

Product InformationINEX WEATHERBOARD™

PRODUCT LENGTH (mm) WIDTH (mm) COVERAGE (mm) THICKNESS (mm) Kg/m2 Kg/Length

INEX>WEATHERBOARD 190 3000 190 160 16 20.7 12

WEIGHTAt approx. 20kg/m2 (16mm) per length INEX>WEATHERBOARD is lightweight and easy to handle on site.

HIGH PERFORMANCEINEX>WEATHERBOARD can be cut and worked just like other comparable fibre cement weatherboard, but offers improved bending strength characteristics and finish quality. INEX>WEATHERBOARD can be fixed to timber or steel studs with spacing at maximum 600mm centres.

NON-COMBUSTIBILTYINEX>WEATHERBOARD is non-combustible. It is approved for bushfire BAL-FZ construction and is certified to Fire Resistance Level of FRL 60/60/60.

ACOUSTICINEX>WEATHERBOARD on a timber or steel frame with R2.5 insulation and 10mm plasterboard internal lining will deliver a sound insulation value of >Rw42, which will satisfy Category 2 of Transport Noise Corridors for external wall requirements. Systems to achieve all Categories of Transport Noise Corridors available on application.

WATER RESISTANCEINEX>WEATHERBOARD is water resistant.

DURABILITYINEX>WEATHERBOARD is long-term durable and is warranted for 20 years.INEX>WEATHERBOARD remains dimensionally stable as a wall cladding material.

RECYCLABLE AND TOXIN FREEINEX>EXPRESS is recyclable and is non-toxic.

MOULD & TERMITE RESISTANCEINEX>WEATHERBOARD is resistant to mould and termite attack.

VALUEINEX>WEATHERBOARD is priced for value for the construction industry and competes strongly against all comparable products. Pricing is available on application.



FRL 60/60/60

BAL-FZ

Product InformationINEX BOND™

PRODUCT SIZE (ml) PACKAGING COVERAGE (linear metres)

INEX>BOND Cartridge 290 12 per carton Approx 18m (4mm bead)

INEX>BOND Sausage 600 12 per carton Approx 36m (4mm bead)

MS Polymer elastic adhesive/sealant with a broad adhesion spectrum and high durability

PRODUCT DESCRIPTION INEX>BOND is a high-quality, exterior-grade, multi-purpose, non-sag, paintable, one-part adhesive/sealant that cures on exposure to atmospheric moisture to form a durable elastomer. For use to seal joints that must accommodate movement,* in any structure, etc., in conjunction with recommended mechanical fixings (nails and screws). INEX>BOND will bond to many materials including most timbers, metals, metal primers and paint coatings (one and two-part systems), ceramics and many plastics. INEX>BOND can provide an elastic water, gas and dust proof seal to ‘moving’ joints in many structures.

TYPICAL APPLICATIONS • The primary application is to seal the joints between INEX>FLOOR boards when used in wet areas such as bathrooms, toilets, laundries, kitchens, balconies and decks.• To seal control joints in ceramic tiled floors in ‘L’ shaped rooms, etc.• In light foot traffic areas it can be used to bond INEX>FLOOR boards to timber or metal joists.• Sealing joints in building facades, around door and window frames and other expansion joints.

PRODUCT BENEFITS• Adheres to many surfaces without primers*• Bonds well to old well-cleaned INEX>BOND adhesive/sealant• Permanently elastic• Odour free• Solvent free• Non-corrosive• Non-sagging in a 40mm wide joint• Superior weatherability to polyurethane sealants and adhesives• Resistant to: water, dilute inorganic acids and alkalis, aliphatic solvents, oils and greases*• Many paint systems can be applied within 10 minutes to 4 hours of application or sooner in some cases.*

* Pre-testing advised.


About Brickworks Building Products™

and associated companies

Brickworks Building Products is one of

Australia’s largest and most diverse

building material manufacturers.

Under the Brickworks Building

Products umbrella are some of

Australia’s best known building

materials brands. Products include

bricks, pavers, masonry blocks,

retaining wall systems, precast

concrete panels, concrete and

terracotta roof tiles, timber products

and specialised façade systems.

Austral Bricks add distinct style to any

type of home. Their natural colours and

textures enable you to create striking

façade contrasts or more traditional

neutral colour tones. By investing in new

technology Austral Bricks now produce

bricks with a variety of surface finishes,

exciting colours and different sizes.

The unique combination of traditional

craftsmanship and modern technology

will ensure that the Bowral Bricks brand

will remain the benchmark for brick

excellence for many years to come.

With a heritage reaching back to 1862,

Nubrik™ premium-quality bricks are still

moulded the traditional way

on century-old presses. Their time-

honoured expression of authenticity

and elegance is acknowledged by

architects, builders and discerning

homebuyers who also value their

rich colour blends, solidity and

crisply-defined edges.

Since 1853, Daniel Robertson has

helped build Australia with building

products that combine craftsmanship

with architectural excellence. In a

world where qualities are constantly

compromised, Daniel Robertson

premium-quality clay bricks are highly

prized for their unique character,

earthy appeal and individual charm.

Austral Masonry is a leading

manufacturer and supplier of concrete

masonry products focused on

providing functional but stylish solutions

to the civil, residential, commercial and

industrial building and construction

markets. Our range of products

includes standard grey concrete

blocks, coloured architectural

concrete blocks with a range of

different finishes and a comprehensive

range of retaining walls, pavers and

garden edging. Founded in 1908,

Austral Bricks is Australia’s largest,

best-known and most efficient clay

brick and paver manufacturer.

Austral Precast® Austral Masonry® Terraçade


In just a few years, Austral Precast

has become Australia’s premier

supplier of high-quality, innovative

and customisable precast concrete

product solutions. Using state-of-the-art

technology, production techniques

and systems, our precast division

produces a diversified range of wall,

floor, column, and client-specific

precast solutions.

For almost a century, Bristile Roofing

has delivered stylish and innovative

roofing products for Australian homes.

Bristile is now one of Australia’s largest

manufacturers and installers of quality

roof tiles and the exclusive Australian

distributor of La Escandella premium

quality clay roof tiles from Spain.

From production facilities in Western

Australia, Victoria and the ACT,

Auswest Timbers manufactures a

diverse range of timber products.

Jarrah, karri and chestnut timbers are

processed into a range of decorative,

seasoned products for furniture and

joinery, flooring, decking, staircase

components, veneers and

fence screening.

Façade systems are a cost and

time-efficient approach to cladding

commercial and upscale residential

buildings. The Terraçade™ system,

developed in Australia by Brickworks

Building Products, combines the

visual appeal and colourfastness of

terracotta with the low maintenance

and functional efficiency demanded in

today’s competitive market.

Pronto Panel is a non-load bearing panel system that can be used both internally and externally. Pronto Panels durable, lightweight and simplistic nature makes it perfectly suitable for both residential and commercial

applications.

INEX>BOARDS provide a range of high performing lighter weight materials for

the construction industry. INEX>BOARDS offer a superior, yet price competitive,environmentallly friendly alternative tofibre cement and plasterboard products. Critically the products are both low carbon and high performing, whilst at the same time being affordable, delivering to the construction industry a better, safer and cost-effective solution.

Austral Bricks® INEX>BOARDS®


INEX>BOARDS

ABN 17 000 028 526

ANNUAL REPORT 2015

INEX>BOARDS

ABN 17 000 028 526

ANNUAL REPORT 2015

BUILDING PRODUCTS

INEX BOARDS™

National Head Office62 Belmore Road Punchbowl NSW 2196

www.inexboards.com.au Phone 1300 463 923

The product images shown in this brochure give a general indication of the actual colour for your preliminary selection. We recommend that all customers see actual product samples at a selection centre prior to making final selections. Revised March 2016

proud supporters

Range of building products:

Documents

Product Guide INEX BOARDS - Shoalhaven Brick and Tileshoalhavenbrickandtile.com.au/.../IB-Inexboards-ProductGuide-NAT.pdf · compliant in accordance with AS3959-2009 construction