Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Product Guide
Experienced
Flexible
Reliable
Approachable
Genuine
Wilson Hot Water commenced operations in 1930, in the backyard of the Melbourne suburb of Coburg. Mr A J Wilson, an electrician, began manufacturing low pressure water heaters for the domestic market… a product we still manufacture nearly 90 years later.
Wilson is still Australian owned and operated, however, the range of products Wilson Customised Hot Water now manufacture has grown significantly.
1
Quick Reference Index
Commercial Pressure Vessels & Calorifiers Page 03
Commercial Hot Water Storage Page 04
Solar Ready Tanks (SRT) Page 05
Domestic Hot Water Heaters Page 06
Solar Preheat Systems Page 07
ThermaCoil Heat Recovery Page 08
Ceiling Mount Water Heaters (Gravity Feed) Page 9 - 10
Floor Mount Water Heaters (Gravity Feed) Page 11 - 12
Boiling/Chilled - Undercounter Page 13
Boiling Water Units - Wall Mount Page 14
Instantaneous Electric - A5 Page 15
Instantaneous Electric - Super X Page 16
Stackable Safe Trays Page 17
Chilled Water Buffer Tanks Page 18
Dosing Pots Page 19
Dairy Hot Water Heaters - RF Series Page 20
Dairy Hot Water Heaters - D Series Page 21
Dairy Solar Systems Page 22
Header Tanks - Cold Feed Page 23
Spare Parts Page 24-26
2
Wilson Hot Water manufactures high quality, long service life vessels for projects that require large volume hot or chilled water storage. The MPISV vessel are available in sizes from 400 litres to 5000 litres and are manufactured from high grade Duplex 2205 stainless steel.
Vessels can be heated by boiler, calorifier coil, solar thermal, heat pump, electric elements and/or a combination.
Design & Features
Duplex 2205 Stainless Steel20 Year Warranty
MPISV Specifications
3
PRESSURE VESSELS & CALORIFIERS
• Mains Pressure Stainless Steel cylinder - Duplex 2205
• Polyurethane foam insulation
• Designed to AS1210
• Calorifier coils available up to 155 kW
• Tube & Bundle heat exchangers designed to suit application
• Watermark approved
MODEL
MPISV400MPISV650MPISV800MPISV1000MPISV1500MPISV2000MPISV2500MPISV3000MPISV4000MPISV5000
CAPACITY (litres)
4006508001000150020002500300040005000
DIAMETER (mm)
880880880880130013001300130018001800
HEIGHT (mm)
1100164019402440165020902540299021202570
Wilson specialise in customer satisfaction, endeavouring to design specific to projects, that require large volume hot or chilled water storage. The MPS vessel are available in sizes from 400 litres to 2000 litres and are manufactured from 316 grade stainless steel.
Vessels can be heated by boiler, calorifier coil, solar thermal, heat pump, electric elements and/or a combination.
• Mains Pressure Stainless Steel cylinder - 316
• Rockwool insulation
• Designed to AS1210
• Calorifier coils available up to 155 kW
• Watermark approved
• 10 year warranty
Design & Features
MPS Specifications
MODEL
MPS400
MPS650
MPS800
MPS1000
MPS2000
CAPACITY (litres)
400
650
800
1000
2000
DIAMETER (mm)
880
880
880
880
13000
HEIGHT (mm)
1100
1640
1940
2440
2300
HOT WATER STORAGE
316 Stainless Steel 10 Year Warranty
4
If your old electric hot water heater has failed and your not ready to add solar hot water your home just yet you can purchase a Wilson Solar Ready Tank. The Wilson Solar Ready Tank will work the same as your old electric water heater, but will have the extra flow and return ports added for when you are ready to add solar hot water evacuated tube or flat panels.
The tanks are manufactured from stainless steel and fitted with flow/return ports, a temperature probe pocket plus the normal cold inlet and hot outlet with a 3.6kW electric element.
• Mains Pressure Stainless Steel cylinder - 316
• Polyurethane foam insulation
• Solar flow/return ports
• 3.6kW element (optional)
• Temperature probe pocket
• Watermark approved
• 10 year warranty
* if element NOT required change prefix to MPS
Design & Features
Solar Ready Tank Specifications
5
MODEL
Delivery (L)
Element (optional)
Solar Flow/Return Ports
Temperature Probe
Height (mm)
Diameter (mm)
PTR Setting
Max.Supply Pressure
MPE315S*
315L
3.6kW
2015
620
850kPa
750kPa
MPE315SM*
315L
3.6kW midmount
2015
620
850kPa
750kPa
MPE250S*
250L
3.6kW
1690
620
850kPa
750kPa
MPE160S*
160L
3.6kW
1190
620
850kPa
750kPa
SOLAR READY TANKS (SRT)
316 Stainless Steel 10 Year Warranty
Wilson Hot Water Heaters are available in both storage and electric boosted options and manufactured from 316 grade stainless steel.
The cylinder is then cased in ‘Dune’Colorbond® and insulated with high grade polyurethane foam. These heaters are available in three sizes of 160, 250 and 315 litres.
6
* if element NOT required change prefix to MPS
Design & Features
Electric or Storage Specifications
• Mains Pressure Stainless Steel cylinder - 316
• Polyurethane foam insulation
• 3.6kW element (optional)
• Outer Casing - Dune Colorbond®
• Watermark approved
• 10 year warranty
MODEL
Delivery (L)
PTR Setting
Max.Supply Pressure
Approx. Weight Empty
Max. Temperature
Elements
Rec. Temperature
Dimension (H) mm
MPE160*
160L
850kPa
750kPa
30kg
80˚C
1 x 3.6kW
70˚C
1190
MPE250*
250L
850kPa
750kPa
50kg
80˚C
1 x 3.6kW
70˚C
1690
MPE315*
315L
850kPa
750kPa
80kg
80˚C
1 x 3.6kW
70˚C
2015
HOT WATER HEATERS
316 Stainless Steel 10 Year Warranty
Wilson Hot Water, established since 1930, have a range of Solar preheat Gas & Electric boosted hot water systems; to suit your requirements or specification. Our pressure vessels are manufactured exclusively in stainless steel for industrial, commercial & residential applications.
7
Design & Features• Complete packages available • Choice of evacuated tube/ flat panel / tank mounted or free standing boiler • Long life stainless steel vessels - 10 or 20 year warranty options available• Hot water storage buffer tanks from 160 litre - 5000 litre
We can custom buildto suit your specific requirements
Gas or Electric Combination Systems
The Wilson Hot Water ThermaCoil stainless steel tank is among the most efficient heat exchange mains pressure tanks available.
ThermaCoil is the ideal vessel for heating domestic hot water from renewable energy or waste heat sources with the highly efficient finned tube heat exchange coil designed to deliver as much energy as possible into the ThermaCoil tank. Energy sources can be:
ThermaCoil Specifications
8
MODEL
Delivery
Solar Compatible
Stove wet back compatible
Heat Exchanger/Internal Coil
Element
Cylinder
Height
Diameter
Approx Weight (empty)
Various kW ratings available
WTC315
315L
YES
YES
3.6kW
Stainless Steel
2015mm
620mm
88kg
WTC250
250L
YES
YES
3.6kW
Stainless Steel
1690mm
620mm
58kg
Other tank and coil (kW rating) sizes upon request
Wilson low pressure electric water heaters are designed to be conveniently installed in the ceiling space. The water heaters are supplied complete with a compact polyethylene cold water feed tank, float and ball valve.
An optional special cold tank to allow equal flow of hot and cold water to the shower is available. Wilson units are constructed from copper, insulated then encased in galvanised steel.
Customised vessels can bemanufactured upon request
9
Ceiling MountHot Water Heaters
• Optional connection for solar and /or stove • Mains pressure coil or heating coil• High grade copper cylinder and galvanised outer case
• 5 year warranty
Design & Features
10
Wilson low pressure electric water heaters are designed to operate up to a head pressure of 7.0 metres via an overhead cold water feed tank. The water heater can be installed in the ceiling space or at floor level.
The position of the overhead tank controls the flow performance of the heater: the higher the header tank, the better the flow rate. These hot water heaters must be vented to atmosphere.
Customised vessels can bemanufactured upon request
11
Floor MountHot Water Heaters
Wilson floor type electric hot water systems are constructed of solid copper, enclosed in an extremely efficient insulation with a colourbond outer steel case. These water heaters can be heated with alternative energy options, such as solar and/or stove and can be fitted with a mains pressure coil.
For use with separate cold feed tank (Not supplied) and external heat source eg. slow combustion stove. Includes: 25mm stove connections
12
The Wilson Refresh is the ideal appliance for filtered boiling and chilled water in the office or home. The Wilson Refresh is available in three combinations; boiling /chilled, boiling only, chilled only. The Wilson Refresh has been designed for ease of use incorporating robust and reliable technology that delivers durability with stylish design.
• Australian made• Effortless programming• Filter change LED light• Low cost maintenance • Auto sleep mode
Design & Features
Under Counter Boiling & Chilled
13
* Chilled water delivery based on 20˚C incoming water temp, 10˚C chilled water, 32.2ºC ambient air temp. Remote tray kit available for split installation of boiler and chiller.
MODEL
Cups per hour (boil/chill)*
Dimensions (boiler)
Dimensions (chiller)
Weight (Approx)
Min Water Supply Pressure
Max Water Supply Pressure
Plumbing Connections
Input Power Boil/Chill
Electrical Connections
Filter BR 540
Tap
MODEL
Cups per hour (boil/chill)*
Dimensions (boiler)
Dimensions (chiller)
Weight (Approx)
Min Water Supply Pressure
Max Water Supply Pressure
Plumbing Connections
Input Power
Electrical Connections
Filter BR 540
Tap
W120B/125C
120/125
300W x 300D x 616H
340W x 440D x 535H
50kg
250kPa
1600kPa
15mm BSP male
2400W/390W
2x3 pin 10A plug
YES
W65C
65 Chilled
315W x 415D x 365H
15kg
250kPa
1600kPa
15mm BSP male
260W
1x3 pin 10A plug
NO
Carafe
W125C
125 Chilled
340W x 440D x 535H
21kg
250kPa
1600kPa
15mm BSP male
390W
1x3 pin 10A plug
NO
Carafe
W90B/125C
90/125
300W x 300D x 616H
340W x 440D x 535H
45kg
250kPa
1600kPa
15mm BSP male
1800W/390W
2x3 pin 10A plug
YES
W120B
120 Boiling/Ambient
300W x 300D x 616H
20kg
250kPa
1600kPa
15mm BSP male
2400W
1x3 pin 10A plug
YES
W90B/65C
90/65
300W x 300D x 406H
315W x 415D x 365H
40Kg
250kPa
1600kPa
15mm BSP male
1800W/260W
2x3 pin 10A plug
YES
W90B
90 Boiling/Ambient
300W x 300D x 406H
15Kg
250kPa
1600kPa
15mm BSP male
1800W
1x3 pin 10A plug
YES
The Wilson Electronic Cuppa is avalable in 13 models, with either white colorbond or a stainless steel exterior finish. Commencing at 2.5 litres which will suit a small office or factory to the massive 60 litre unit with 2 outlet taps for quick discharge of hot water. Ideal for commercial kitchens and restaurants.
No separate thermostat required as all models are electronically controlled resulting in a minimum fluctuation of water temperature. Low maintenance - The boiling water unit has only 2 moving parts: Float valve and draw off tap.
MODEL
AU02.5
AU05
AU10
AU15
AU15/3.6
AU20
AU20/3.6
AU25
AU25/3.6
AU30
A30/3.6
AU45
AU60
Litres/Cup
2.5/15
15/30
10/60
15/90
15/90
20/120
20/120
25/150
25/150
30/180
30/180
45/270
60/360
Cups/min
2.5
2.5
2.5
2.5
3.5
2.5
3.5
2.5
3.5
2.5
3.5
5.0
5.0
Tank Type
Stainless Steel
Stainless Steel
Stainless Steel
Copper
Copper
Copper
Copper
Copper
Copper
Copper
Copper
Copper
Copper
H x W x D
380 x 310 x 155
485 x 310 x 155
590 x 335 x 170
490 x 370 x 275
490 x 370 x 275
565 x 370 x 275
565 x 370 x 275
640 x 370 x 275
640 x 370 x 275
715 x 370 x 275
715 x 370 x 275
710 x 426 x 340
860 x 426 x 340
Element kW
2.4
2.4
2.4
2.4
2 x 1.8
2.4
2 x 1.8
2.4
2 x 1.8
2.4
2 x 1.8
2 x 2.4
2 x 2.4
Weight
6.4kg
7.2kg
8.4kg
12.5kg
12.5kg
13.5kg
13.5kg
14.5kg
14.5kg
16.2kg
16.2kg
18.5kg
20.2kg
Wall Mounted Models
* Note: All 2.4 and 3.6 kW units supplied with flex and plug brackets (2.4 kW = 10Amp) (3.6 kW = 15Amp) 4.8 kW units to be direct wired. No warranty on float valve.
14
The Wilson A5 Series is a continuous flow instantaneous electric hot water heater. The Wilson A5 is energy efficient as it will only heat water as required. The heater has no storage and will continually heat as water passes over the heating elements. The Wilson A5 does not require a safetray or water saving devices.
The Wilson A5 can be installed virtually anywhere to cater for most installations and is fully serviceable. This unit will deliver sufficient hot water for factory amenities, small domestic dwellings and shops.
• 3 Models: - A5: 20 amp 3 Phase - A5: 23 amp 3 Phase - A5: 18 amp 3 Phase• Serviceable parts• 2 year Dom. & Com. Warranty • Watermark approved
• Adjustable flow control
15
Design & Features
Installation Diagram
Instantaneous Electric Water Heater
The new Wilson Super X version 6 has been designed to be a flexible instantaneous hot water unit. It can be installed with or without the supplied Expansion Valve making for a quick & easy installation. The choice is yours! The Wilson Super X has no storage and is energy efficient as it only heats water as required and will continually heat as water passes over the elements.
The Wilson Super X can be installed virtually anywhere and will supply enough hot water for small domestic dwellings, shops or factory amenities.
• 18 Amp / 3 phase
• 4.5 Litres per min. with a 40˚C temp rise
• 2 year Dom. & Com. Warranty • Optional Expansion Valve• Western Australian Specific
16
Design & Features
Installation
Instantaneous Electric Water Heater
All Wilson Safetrays are stackable therefore reducing the amount of room required on stock shelves whilst allowing for ease of transport and less damage.Wilson trays are manufactured in four materials; Galvanised, Zinc, Copper and Plastic and a wide range of sizes will cover most requirements. Other sizes can be made to client specifications
17
Options and SizesMODEL
T001B
T006
T009
T001A
T007
T008
T004
T005
Size W x L x H
450mm x 450mm x 50mm
500mm x 500mm x 50mm
550 mm x 550mm x 50mm
600mm x 600mm x 50mm
700mm x 700mm x 50mm
750mm x 750mm x 50mm
1050mm x 1050mm x 50mm
1100mm x 1100mm x 50mm
Type
Galvanised Safety Tray
Galvanised Safety Tray
Galvanised Safety Tray
Galvanised Safety Tray
Galvanised Safety Tray
Galvanised Safety Tray
Galvanised Safety Tray
Galvanised Safety Tray
TC001B
TC006
TC009
TC001A
TC007
TC008
TC004
450mm x 450mm x 50mm
500mm x 500mm x 50mm
550 mm x 550mm x 50mm
600mm x 600mm x 50mm
700mm x 700mm x 50mm
750mm x 750mm x 50mm
1050mm x 1050mm x 50mm
Copper Safety Tray
Copper Safety Tray
Copper Safety Tray
Copper Safety Tray
Copper Safety Tray
Copper Safety Tray
Copper Safety Tray
TZ001B
TZ006
TZ009
TZ001A
450mm x 450mm x 50mm
500mm x 500mm x 50mm
550 mm x 550mm x 50mm
600mm x 600mm x 50mm
Zinc Safety Tray
Zinc Safety Tray
Zinc Safety Tray
Zinc Safety Tray
TP450
TP500
TP550
450mm x 450mm x 50mm
500mm x 500mm x 50mm
550 mm x 550mm x 50mm
Plastic Safety Tray
Plastic Safety Tray
Plastic Safety Tray
• Unique stackable tray • Easy to transport• Range of sizes available• Choose from galvanised, zinc, copper & plastic
Design & Features
Other size metal trays made to order
Zinc
Galvanised
Copper
Plastic
Wilson Chilled Water Buffer Tanks (CWBT) are designed specifically for chilled water systems. Designed and built to AS1210 Pressure Vessel Code, Haz E. These heavy duty commercial stainless steel vessels are available in options of polyurethane or polystyrene, foil coated, vapour sealed insulation to comply to Section J of BCA code.
The Chilled Water Buffer Tank is then surrounded by an attractive colorbond outer case with the option to upgrade to aluminium or stainless steel. The properly sized CWBT is the perfect solution to rectify low level water conditions which occurs from insufficient water volume to chiller capacity ratio.
This additional “buffer” capacity adds the necessary volume capacity required to eliminate problems such as; excessive chiller cycling, poor temperature control or erratic system operation. Standard vessels are manufactured in stainless steel therefore not susceptible to corrosion, that can occur due to high condensation in higher humidity environments.
Larger sizes available upon request up to 5,000 litres
Chilled Water Buffer Tank Specifications
18
MODEL
Capacity (L)
Height (H)
Diameter (D)
Weight (kg)
CWBT330
330
1610
660
85
CWBT400
400
1900
660
110
CWBT530
530
1525
880
130
CWBT680
680
1790
880
150
CWBT810
810
2100
880
160
CWBT1050
1050
2600
880
185
Flanges available from 50mm- 300mm to comply to specification
CHILLED WATER BUFFER TANKS
Specifications below are based on grade 304 stainless steel and stainless steel overflow. All other sizes are made to order.
All sizes made to order in grade 316 stainless steel. Higher pressure ratings are available.
1
MODEL
WILDP14
MODEL
WILDP07
WILDP15
WILDP20
WILDP25
WILDP40
WILDP45
Weight Unfilled
6.7 Kg
Weight Unfilled
5.2 Kg
6.7 Kg
8.2 Kg
9.3 Kg
12.3 Kg
13.1 Kg
Stand. Pressure & Temp
1MPA at 99˚C
Stand. Pressure & Temp
1MPA at 99˚C
1MPA at 99˚C
1MPA at 99˚C
1MPA at 99˚C
1MPA at 99˚C
1MPA at 99˚C
Diameter x Nominal Height
216mm x 915mm
Diameter x Nominal Height
216mm x 740mm
216mm x 970mm
216mm x 1100mm
216mm x 1230mm
318mm x 1090mm
318 mm x 1145mm
Description
14 LT Dosing Pot
Description
7 LT Dosing Pot
15 LT Dosing Pot
20 LT Dosing Pot
25 LT Dosing Pot
40 LT Dosing Pot
45 LT Dosing Pot
Stock Item
Made to Order
• 304 Stainless Steel
• 316 Stainless Steel made to order
• Australian Made• Coupon Racks Available
Design & Features
For Closed Circulating Systems
19
20
MODEL
RF 0315
RF 0400
RF 0500
RF 0630
RF 0800
RF 1000
RF 1260
RF 1360
RF 1500
RF 1600
RF 1800
RF 2000
Element Sizes (kW) Main / Booster
2 x 3.0 main / 1 x 3.0 booster
2 x 3.0 main / 1 x 3.0 booster
2 x 3.6 main / 1 x 3.6 booster
2 x 4.8 main / 1 x 3.6 booster
3 x 3.6 main / 1 x 3.6 booster
3 x 4.8 main / 1 x 3.6 booster
3 x 6.0 main / 1 x 3.6 booster
3 x 6.0 main / 1 x 3.6 booster
3 x 6.0 main / 1 x 3.6 booster
4 x 6.0 main / 1 x 3.6 booster
4 x 6.0 main / 1 x 3.6 booster
4 x 6.0 main / 1 x 3.6 booster
Dia x Height (mm)
860 x 1095
860 x 1295
860 x 1535
860 x 1845
1040 x 1570
1040 x 1865
1140 x 1895
1140 x 2040
1140 x 2210
1140 x 2345
1140 x 2570
1140 x 2810
Del. Litres
315
400
500
630
800
1000
1260
1360
1500
1600
1800
2000
Dairy Hot Water Heater Specifications
Suffix Code
COCB
COSS
SSCB
SSSS
Outer Case
Colourbond
Stainless Steel
Colourbond
Stainless Steel
Cylinder
Copper
Copper
Stainless Steel
Stainless Steel
* Add suffix code to product # below (eg: RF 1000 COCB)
All units are fitted with adjustable thermostats and supplied with tip to toe anodes. The range of dairy heaters allows for the correct choice to be made to suit all cleaning programs: as a rule of thumb, 25 litres per set of cups per day.
Wilson have available four flexible options depending on your requirements eg. the traditional copper cylinder with
colorbond case, ranging to the premium stainless steel cylinder with polished stainless steel outer case.
Rapid Flow Dairy Heaters
The Wilson “D” Series Dairy Water Heater is available with or without attached header tank. If installed with a separate header tank, the maximum head pressure which is measured from the base of the storage unit to the top of the open vent pipe, must not exceed 6 metres.
21
MODEL
D2
D3
D5
D6
D7
D8
Element Sizes (kW) Main / Booster
1 x 3.0 main / 1 x 2.4 booster
1 x 3.6 main / 1 x 2.4 booster
1 x 4.8 main / 1 x 2.4 booster
2 x 3.0 main / 1 x 3.0 booster
3 x 3.6 main / 1 x 3.6 booster
2 x 4.8 main / 1 x 3.6 booster
Dia x Height (mm)
660 x 920
660 x 1255
660 x 1575
790 x 1365
790 x 1640
790 x 2000
Del. Litres
160
250
315
400
500
630
MODEL
D2/T
D3/T
D5/T
D6/T
D7/T
D8/T
Element Sizes (kW) Main / Booster
1 x 3.0 main / 1 x 2.4 booster
1 x 3.6 main / 1 x 2.4 booster
1 x 4.8 main / 1 x 2.4 booster
2 x 3.0 main / 1 x 3.0 booster
3 x 3.6 main / 1 x 3.6 booster
2 x 4.8 main / 1 x 3.6 booster
Dia x Height (mm)
660 x 1320
660 x 1655
660 x 1975
790 x 1765
790 x 2040
790 x 2400
Del. Litres
160
250
315
400
500
630
“D” Series Dairy Heater With separate cold feed tank - 1” outlet
“D/T“ Series Dairy Heater With attached cold feed tank - 1” outlet
Both models are available in a variety of sizes and all are fitted with main and booster elements. The booster element is used to restore heat lost between the morning and evening milking and can either be turned on and off manually or controlled by a time switch. Element sizes are based on a 8 hour heatingcycle, but can be varied upon request.
“D” Series Dairy Heaters
Understanding energy costs increase year on year and dairy hot water heaters contribute a large portion to the cost of energy in the dairy shed, Wilson Hot Water have
designed an integrated solar hot water system specifically for the dairy industry using high performance Evacuated Tube technology coupled with one Wilson tank to suit your
dairy farm hot water requirements.
22
Dairy Solar Specifications
MODEL
Solar Tank
Solar Panels
Support Frame
Pump
Solar Controller
Header Tank
WDS600/1
1 x 600 Ltr
50 tubes
WDS600/2
1 x 600 Ltr
100 tubes
WDS800/2
1 x 800 Ltr
100 tubes
WDS1000/2
1 x 1000 Ltr
100 tubes
WDS1260/3
1 x 1260 Ltr
150 tubes
WDS1500/3
1 x 1500 Ltr
150 tubes
Dairy Hot Water Solar Solutions
Larger size solar systems available upon request
23
COLD FEED TANKS
CODE No. DESCRIPTION LITRES W x D x H (mm)
* Note: Other sizes available upon request
SPARE PARTS
Wilson A5 - Electric Instantaneous
Wilson Super X - Electric Instantaneous
Wilson Refresh - Undercounter Boiling/Chilled
24
SPARE PARTS
Elements
Valves, Solenoid & Float
25
BWU = Boiling Water Unit DOM = Domestic Water HeatersDAIRY = Dairy Hot Water Heaters
SPARE PARTS
Taps
Thermostats
Miscellaneous
Anodes
BWU = Boiling Water Unit DOM = Domestic Water HeatersDAIRY = Dairy Hot Water Heaters
26
All product sold in accordance with “Wilson Hot Water Warranty and General Conditions of Sale”.
2017-01
130 -140 Merrindale DriveCroydon South VIC 3136
P +61 3 9751 7788 F +61 3 9751 7755