Product Information - ::: (주)웨딩스쿨 ::: 고품격 ... · CCP/XCP/UDS/KWP (with speed-up for CCP/XCP for better flashing performance) Multi-Client Support ES582.1 adds CAN-FD

1 Public | PGA | 2016-08-15 | © ETAS GmbH 2016. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the event of applications for industrial property rights.

Product InformationES582.1 – Compact USB Device


Compact Line

Product Description

ES582.1 – Compact USB DeviceContent


Compact Line

Product Description



ES582.1 – Compact USB DeviceCompact Line – Positioning

In-Vehicle Compact Line• In-vehicle• Mobile• Compact• Low Priced

In-Lab Line• PC technology• Scalable from RTPC to

network HiLs

In-Vehicle Premium Line• In-vehicle• Scalable• High performance• Robust • High-end use cases

• Open interfaces• Integration in ETAS SW


Compact Line

Product Description

Key Characteristics

What is CAN-FD

Technical Specification

Portfolio Overview



Key Characteristics

Targeted for ECU measurement, calibration, diagnostics and flash programming

Power and communication over USB

2 High-Speed CAN-FD channels, electrical isolated

Compatible with ISO and non-ISO CAN-FD versions

Supports SAE J2534-2

CCP/XCP/UDS/KWP (with speed-up for CCP/XCP for better flashing performance)

Multi-Client Support

ES582.1 adds CAN-FD access to the Compact Line

ES582.1 – Compact USB DeviceProduct Description – Key characteristics


ES582.1 – Compact USB DeviceProduct Description – What is CAN FD?

CAN FD allows for 64 bytes and higher data rate in the data phase.

Some advantages of CAN FD (CAN with Flexible Data rate):1. Fulfills future bandwidth requirements up to 8 Mbit/s at low node cost2. Allows reuse of the existing CAN wiring in the vehicle3. Smooth migration by integration CAN FD node in a CAN network4. Needs low power consumption

8 byte 8 byte

Arbitration

64 byte

8 byte

ArbitrationArbitration

1. Higher Data Rate During Data Phase

2. Up to 64 Byte Payload

CANFrame

CAN FDFrame

Arbitration


GeneralDimension (HxWxD) 22 x 50 x 91 mm / 0.87 x 1.97 x 3.58 in (housing)

Weight 100 g / 3.527 oz

Temperature range -40°C to +70°C (Operation)-40°C to +85°C (Storage)

Relative humidity 15 % to 95 %, non-condensing

Power supplyPower consumption USB powered, < 100 mA Input current at 5V

CAN InterfacesCAN port 2 CAN-FD channel, with DSUB 9 connector (according to CiA standard)

Protocols (CAN + CAN-FD) UDS (ISO14229/ISO15765), XCP, CAN Monitoring, OBD-on-CAN (ISO15765-4) CCP1 and KWP-on-CAN (ISO14230/ISO15765) are supported with CAN classic only.

SAE J2534-1 Pass Thru Interface

- CAN 2.0B ISO 11898- CAN ISO 15765-4

CAN transceiver High-speed transceiver (TJA1044G ), Standard (V2.0a) or Extended Format (V2.0b), ISO High-speed mode, CAN-FD (non ISO CAN FD V1 and ISO 11898-2:2015 )

Max. baud rate CAN: 1 Mbit/s, CAN-FD: 5 Mbit/s (at optimum environmental conditions even higher baud rates are possible.

Electrical isolation (USB – CAN) Interface is galvanically isolated

Data sheet

ES582.1 – Compact USB DeviceProduct Description – Technical Specification


Data sheet


Data synchronizationINCA synchronizes ECU data from the ES582, data from external measurement modules (e.g., ES400 family) and ETKs.

3rd Party HardwareSupport for Ipetronik CAN and CSM CAN hardware

PC InterfaceUSB USB 2.0, High speed

Integrated USB cable 1,5 m / 4.9 ft

Host system requirementsOperating system Windows® 7, 8, 10

Software supportINCA V7.2 or higher, ODX-LINK V1.3 or higher, ODX-Flash, BUSMASTER, HSP, DiagRA & DTS (Diagnostic Tool Set) via J2534



INCA supportGeneral ES582.1 is integrated native into INCA like any other ETAS HW device.

Supported as of INCA V7.2.3

Supported use cases INCA supports all available CAN protocols also on ES582.1. ES582.1 supports CAN based measurement modules

Number of devices supported

INCA supports up to four ES582.1 devices at a time.

Flash programming INCA can only use a CAN port for flash programming that is located in the same device that is used for Calibration and Measurement.

Data sheet


ES582.1 – Compact USB DeviceProduct Description – Product Schedule & Delivery Content

ES582.1 Delivery Content

ECU and Bus interface moduleShort Name Long Name Part Number

ES582.1 ES582 Dual Channel CAN-FD Bus Interface USB Module TBD

Including: CAN and FlexRay Interface Y-Cable (CBCF100.1-0m3)

F-00K-107-939

AccessoriesShort Name Long Name Part Number

CBCX131-0 CAN Termination Resistor 2xDSUB F-00K-103-786

CBAC180-2 CAN Interface Cable, OBDII J1962 - DSUB (16mc-9fc), 2m F-00K-107-300

+

ES582 Roadmap

Project milestones:QA2 (Ordering possible): End November 2016

QA3 (Product release): Q1 2017


ES582.1 – Compact USB DeviceCompact USB Line – Overview

ES58x Family Overview

Device DescriptionHost1

USB

ECU and Vehicle Bus interfaceSystem extension

RoadmapFlexRay2

CANHS

CANFD LIN LIN

Master

ES581.4 CAN module 1 - 2 - - - Available

ES582.1 CAN-FD module 1 - X3 24 - - Q1 2017

ES583.1 FlexRay module 1 15 - - - - Available1 Host interface to connect to e.g. PC or ES720.2 A FlexRay port consists of a FlexRay node with A/B channels.3 CAN or CAN-FD mode selectable by software4 Update to ISO 11898-2:2015 version of CAN-FD, both ISO and non ISO is supported in parallel5 With synchronization node

Note:The ES581.4 will remain in the ETAS compact line port folio and be sold in parallel to theES582.1


ES581.4 CAN Bus Interface USB Module 2CH Intended for Mobile usage and ad hoc installations Very compact, Easy handling USB connection, USB powered Multi client support for simultaneous access from different tools 2 x CAN

ES583.1 Compact FlexRay Device Intended for Mobile usage and ad hoc installations Very compact, Easy handling USB connection, USB powered 1x FlexRay node (A/B channel) with additional startup node

ETAS USB2x Compact Bus Interface Products

ES582.1 – Compact USB DeviceProduct Description – Bus interface Portfolio Overview


Compact Line

Product Description

ES582.1 – Compact USB DeviceThank You

Documents

Product Information - ::: (주)웨딩스쿨 ::: 고품격 ... · CCP/XCP/UDS/KWP (with speed-up for CCP/XCP for better flashing performance) Multi-Client Support ES582.1 adds CAN-FD