Product Profile - Stanhope- · PDF fileProduct Profile Laboratory Instruments for quality control, analysis and . calibration. Stanhope-Seta, London Street, ... Density ASTM D1298;

Product ProfileLaboratory Instruments for quality control, analysis and calibration

Stanhope-Seta, London Street, Chertsey, Surrey, KT16 8AP, UK t: +44 (0) 1932 564391 | e: [email protected] | www.stanhope-seta.co.uk

2

Application Jet A-1 DefStan 91-091

Aviation Turbine Fuel ASTM D1655

Aviation Gasoline ASTM D910

Motor Gasoline EN 228

Motor Gasoline ASTM D4814

Diesel EN 590

Diesel ASTM D975

Fuel Oil ISO 8217

Fuel Oil ASTM D396

Bio-Heating Fuels EN 14213

FAME EN 14214

Bio-Fuel Blend Stock B100ASTM D6751

Instrument Seta Reference Number Application

Aromatics ASTM D1319; 6379;IP 156; 436

ASTM D1319; 6379;IP 156; 436 ASTM D1319 EN 12916 ASTM D1319 Evochrom Aromatics HPLC System

Seta Twin-Column Adsorption Apparatus SA2400-314060-0 Aromatics

Ash EN ISO 6245 ASTM D482 ISO 6245 ASTM D482 ISO 3987 ISO 3987 ASTM D874 Ash Furnace 99220-2 Ash

Carbon Residue EN ISO 10370 ISO 10370;IP 398 EN ISO 10370 EN ISO 10370 ASTM D4530;

D189Micro Carbon Residue Tester 97400-3

Carbon Residue

Cetane Number IP 617; Pr EN 17155 IP 617; Pr EN 17155 IP 617; Pr EN 17155

IP 617; Pr EN 17155 AFIDA Cetane Number Analysis SA6000-0 Cetane Number

CFPP EN 116 ASTM D6371 EN 116 EN 116 CFPP Apparatus 99000-3 CFPP

Cloud Point EN ISO 23015 ASTM D2500 ISO 3015 ASTM D2500 EN ISO 23015 ASTM D2500 Seta Cloud & Pour Point BathSeta Compact Cloud & Pour Point Cryostat

93531-794100-3 Cloud Point

Colour ASTM D156; D6045 ASTM D156; D6045 Colour

Conductivity ASTM D2624; IP 274 ASTM D2624; IP 274 ASTM D2624 ASTM D2624 Handheld Conductivity Meter 99708-0 Conductivity

Copper Corrosion IP 154; ASTM D130 IP 154; ASTM D130 ASTM D130 EN ISO 2160 ASTM D130 EN ISO 2160; IP 154 ASTM D130 ASTM D130 ISO 2160; IP 154 ASTM D130 Cu/Ag Corrosion Bath 11300-2

11400-7 Copper Corrosion

Silver Corrosion ASTM D130; IP 154 IP 227 ASTM D7667; D7671 EN ISO 2160 ASTM D130 ASTM D130 Cu/Ag Corrosion Bath 11300-211400-7 Silver Corrosion

Density ASTM D1298; IP 160 ASTM D1298; IP 160 ASTM D1298 EN ISO 3675 ASTM D1298 EN ISO 3675 EN ISO 3675 ASTM D1298 EN ISO 3675 RampCheck 12650-0 Density

Distillation ASTM D86; IP 123 ASTM D86 ASTM D86 EN ISO 3405 ASTM D86 EN ISO 3405 ASTM D86 ASTM D86 Setastill Distillation 11860-3 Distillation

Existent Gum IP 540; ASTM D381 IP 540; ASTM D381 ASTM D381 ISO 6246 ASTM D381 Existent Gum Bath 12200-3 Existent Gum

FAME Content ASTM D7797; IP 583 ASTM D7797; IP 583 ASTM D7963 ASTM D7963 ASTM D7963 ASTM D7963 FIJI InstrumentsSA5000-2 - JetSA5100-0 - DistillatesSA5200-0 - Multi Fuel

FAME Content

Filter Blocking Tendency IP 387; IP 618 Multi-Filtration Tester (MFT)

Cold Filter Blocking Tester (CFBT)91600-391670-2

Filter Blocking Tendency

Freeze Point ASTM D2386; IP 16 ASTM D2386 ASTM D2386 16990-2 Freeze Point

Flash Point ASTM D3828; D56; IP 170; 523

ASTM D3828; D56; D93; IP 170; 523; 34 EN ISO 2719 ASTM D93; D3828 EN ISO 3679;

2719ASTM D93; D3828

EN ISO 3679;IP 523; IP 524

EN ISO 3679; 2719; IP 523; IP 524

ASTM D3828; D93

Automatic Pensky-Martens Setaflash Series 3 RangeSetaflash Series 8 Range

35000-0Series 3 Series 8

Flash Point

Hydrogen Sulfide IP 570 H2S Analyser with Vapour Phase Processor SA4000-3 & SA4015-0 Hydrogen Sulfide

Oxidation Stability ASTM D873 ISO 7536 ASTM D525 EN ISO 12205; IP 388 ASTM D2274; D5304 ISO 12205 EN 15751Oxidation Bath TOST Bath TOST Dry Block Bath

16900-716640-0 16645-0

Oxidation Stability

Particulates/Contamination

IP 565; 423; ASTM D5452

ASTM D2276; D5452; IP 216; 423 EN 12662 ASTM D7619; D6217 EN 12662 EN 12662 ASTM D6217 Seta AvCount2 Laser Based Particle Counter

Filtration TestsSA1000-2, SA1800-0Contact Seta for Filtration


Pour Point ISO 3016 ASTM D97 ISO 3016 Seta Cloud & Pour Point BathSeta Compact Cloud & Pour Point Cryostat

93531-794100-3 Pour Point

Smoke Point ASTM D1322; IP 598 ASTM D1322; IP 598 Smoke Point

Total Sediment ISO 10307 Setaclean Total Sediment Tester 16120-2 Total Sediment

Vapour PressureASTM D323; D4953; D5190; D5191; IP 69; 394

ASTM D323; D5191 EN 13016-1 ASTM D5191; D4953; D5482; D5188

Setavap3Setavap2

80500-0 81000-2 Vapour Pressure

Viscosity ASTM D445; IP 71 ASTM D445; IP 71 EN ISO 3104 ASTM D445 EN ISO 3104;IP 71 ASTM D445

EN ISO 3104;EN ISO 3105;IP 71

EN ISO 3104 ASTM D445 KV-6 Viscometer BathKV-2 Viscometer Bath

84200-394710-3 Viscosity

Water and Sediment ASTM D2709; D1796 ISO 3733 ASTM D2709 ASTM D2709;

D1796 Centrifuge 90000-3, 90100-0 Water and Sediment

Water Seperation ASTM D8073 ASTM D8073 WSI - Water Separation Instrument SA9000-0 Water Separation

Table of contents:Flash Point .................................................................4-5

Vapour Pressure ...........................................................6

Crude Oil Testing .......................................................... 7

Cloud & Pour Point ......................................................8

Filter Blocking Tendency ............................................9

Carbon Residue ..........................................................10

Gum Residue ...............................................................10

Oxidation ...................................................................... 11

Viscosity ....................................................................... 12

Air Release, Foaming ...........................................13-14

4-Ball & Shear Stability .............................................. 15

Grease Testing ............................................................16

Conductivity ................................................................ 17

Particle Counting ..................................................18-19

FAME Measurement .................................................. 20

Water Separation ........................................................ 21

Cetane ..........................................................................22

H2S Analysis .................................................................23

Reference Materials ...................................................24


Product Profile

2

3

Application Jet A-1 DefStan 91-091

Aviation Turbine Fuel ASTM D1655

Aviation Gasoline ASTM D910

Motor Gasoline EN 228

Motor Gasoline ASTM D4814

Diesel EN 590

Diesel ASTM D975

Fuel Oil ISO 8217

Fuel Oil ASTM D396

Bio-Heating Fuels EN 14213

FAME EN 14214

Bio-Fuel Blend Stock B100ASTM D6751

Instrument Seta Reference Number Application

Aromatics ASTM D1319; 6379;IP 156; 436

ASTM D1319; 6379;IP 156; 436 ASTM D1319 EN 12916 ASTM D1319 Evochrom Aromatics HPLC System

Seta Twin-Column Adsorption Apparatus SA2400-314060-0 Aromatics

Ash EN ISO 6245 ASTM D482 ISO 6245 ASTM D482 ISO 3987 ISO 3987 ASTM D874 Ash Furnace 99220-2 Ash

Carbon Residue EN ISO 10370 ISO 10370;IP 398 EN ISO 10370 EN ISO 10370 ASTM D4530;

D189Micro Carbon Residue Tester 97400-3

Carbon Residue

Cetane Number IP 617; Pr EN 17155 IP 617; Pr EN 17155 IP 617; Pr EN 17155

IP 617; Pr EN 17155 AFIDA Cetane Number Analysis SA6000-0 Cetane Number

CFPP EN 116 ASTM D6371 EN 116 EN 116 CFPP Apparatus 99000-3 CFPP

Cloud Point EN ISO 23015 ASTM D2500 ISO 3015 ASTM D2500 EN ISO 23015 ASTM D2500 Seta Cloud & Pour Point BathSeta Compact Cloud & Pour Point Cryostat

93531-794100-3 Cloud Point

Colour ASTM D156; D6045 ASTM D156; D6045 Colour

Conductivity ASTM D2624; IP 274 ASTM D2624; IP 274 ASTM D2624 ASTM D2624 Handheld Conductivity Meter 99708-0 Conductivity

Copper Corrosion IP 154; ASTM D130 IP 154; ASTM D130 ASTM D130 EN ISO 2160 ASTM D130 EN ISO 2160; IP 154 ASTM D130 ASTM D130 ISO 2160; IP 154 ASTM D130 Cu/Ag Corrosion Bath 11300-2

11400-7 Copper Corrosion

Silver Corrosion ASTM D130; IP 154 IP 227 ASTM D7667; D7671 EN ISO 2160 ASTM D130 ASTM D130 Cu/Ag Corrosion Bath 11300-211400-7 Silver Corrosion

Density ASTM D1298; IP 160 ASTM D1298; IP 160 ASTM D1298 EN ISO 3675 ASTM D1298 EN ISO 3675 EN ISO 3675 ASTM D1298 EN ISO 3675 RampCheck 12650-0 Density

Distillation ASTM D86; IP 123 ASTM D86 ASTM D86 EN ISO 3405 ASTM D86 EN ISO 3405 ASTM D86 ASTM D86 Setastill Distillation 11860-3 Distillation

Existent Gum IP 540; ASTM D381 IP 540; ASTM D381 ASTM D381 ISO 6246 ASTM D381 Existent Gum Bath 12200-3 Existent Gum

FAME Content ASTM D7797; IP 583 ASTM D7797; IP 583 ASTM D7963 ASTM D7963 ASTM D7963 ASTM D7963 FIJI InstrumentsSA5000-2 - JetSA5100-0 - DistillatesSA5200-0 - Multi Fuel

FAME Content

Filter Blocking Tendency IP 387; IP 618 Multi-Filtration Tester (MFT)

Cold Filter Blocking Tester (CFBT)91600-391670-2

Filter Blocking Tendency

Freeze Point ASTM D2386; IP 16 ASTM D2386 ASTM D2386 16990-2 Freeze Point

Flash Point ASTM D3828; D56; IP 170; 523

ASTM D3828; D56; D93; IP 170; 523; 34 EN ISO 2719 ASTM D93; D3828 EN ISO 3679;

2719ASTM D93; D3828

EN ISO 3679;IP 523; IP 524

EN ISO 3679; 2719; IP 523; IP 524

ASTM D3828; D93

Automatic Pensky-Martens Setaflash Series 3 RangeSetaflash Series 8 Range

35000-0Series 3 Series 8

Flash Point

Hydrogen Sulfide IP 570 H2S Analyser with Vapour Phase Processor SA4000-3 & SA4015-0 Hydrogen Sulfide

Oxidation Stability ASTM D873 ISO 7536 ASTM D525 EN ISO 12205; IP 388 ASTM D2274; D5304 ISO 12205 EN 15751Oxidation Bath TOST Bath TOST Dry Block Bath

16900-716640-0 16645-0

Oxidation Stability


IP 565; 423; ASTM D5452

ASTM D2276; D5452; IP 216; 423 EN 12662 ASTM D7619; D6217 EN 12662 EN 12662 ASTM D6217 Seta AvCount2 Laser Based Particle Counter

Filtration TestsSA1000-2, SA1800-0Contact Seta for Filtration


Pour Point ISO 3016 ASTM D97 ISO 3016 Seta Cloud & Pour Point BathSeta Compact Cloud & Pour Point Cryostat

93531-794100-3 Pour Point

Smoke Point ASTM D1322; IP 598 ASTM D1322; IP 598 Smoke Point

Total Sediment ISO 10307 Setaclean Total Sediment Tester 16120-2 Total Sediment

Vapour PressureASTM D323; D4953; D5190; D5191; IP 69; 394

ASTM D323; D5191 EN 13016-1 ASTM D5191; D4953; D5482; D5188

Setavap3Setavap2

80500-0 81000-2 Vapour Pressure

Viscosity ASTM D445; IP 71 ASTM D445; IP 71 EN ISO 3104 ASTM D445 EN ISO 3104;IP 71 ASTM D445

EN ISO 3104;EN ISO 3105;IP 71

EN ISO 3104 ASTM D445 KV-6 Viscometer BathKV-2 Viscometer Bath

84200-394710-3 Viscosity

Water and Sediment ASTM D2709; D1796 ISO 3733 ASTM D2709 ASTM D2709;

D1796 Centrifuge 90000-3, 90100-0 Water and Sediment

Water Seperation ASTM D8073 ASTM D8073 WSI - Water Separation Instrument SA9000-0 Water Separation


3

Laboratory instruments for quality control, analysis and calibration

4

Why is Setaflash used?

• Quality Control to check for contamination, dilution or adulteration

• Hazard Classification to categorise product for transport & storage regulations

• EU guidelines and Hazardous Waste Regulations for disposed of product

• CLP regulations for classification of substances & mixtures

Where is Setaflash used?Setaflash is an internationally recognised and approved test method giving proven results, the instrument is specified in many international specifications;

Fuel | Diesel | Aviation Fuel | Marine Fuel | Biodiesel | FAME | Ethanol | Oils - Lubricating, Hydraulic, Base, Mineral | Chemicals | Pharmaceuticals | Paints | Cosmetics | Waste

Setaflash Series 3• Temperature range 10 to 130°C or Ambient to 300°C

• Sub-Ambient Tests and Rapid Cool Down

• Large format display

• Full touch screen display

• Control via push button if preferred

• Barometric correction included

• Portable, lightweight, compact design

• Realtime clock

• Results storage – 1GB data capacity

• USB output

• Corrosion Resistant option

Setaflash Series 8

• Temperature range -20 to 130°C or Ambient +5 to 300°C

• Small sample size, 2 or 4ml

• Corrosion Resistant cup option

• Electric ignitor (with gas option)

• Automatic dipping and flash detection

• ActiveCool electronic Peltier cooling

• 64 Test memory & RS232 interface

• °C or °F temperature display

• Barometric pressure correction

NOTE: Features vary according to the model selected

Seta Model: Seta Part No: Temperature Range: Ramp Rate: Cup Material: Heating/Cooling Method: Size (HxWxD) / Weight:

Series 3 Activecool 33200-2 10 to 130°C 2°C/min ramp Aluminium Peltier Cell 26 x 28 x 26cm / 5kg

Series 3 Activecool(Corrosion Resistent)

33250-2 10 to 130°C2°C/min ramp Corrosion resisting steel Peltier Cell 26 x 28 x 26cm / 5kg

Series 3 ‘Plus’(Auto Ramp)

33000-2 Ambient to 300°C*(0 to 300°C with coolant module)

2°C/min ramp Aluminium External Cooling module (13870-0) 26 x 28 x 26cm / 5kg

Series 3 Open Cup 31000-0 Ambient to 300°C*(0 to 300°C with coolant module)

Aluminium External Cooling module (13870-0) 26 x 28 x 26cm / 5kg

Series 3 Closed Cup 30000-2 Ambient to 300°C*(0 to 300°C with coolant module)

NA Aluminium External Cooling module (13870-0) 26 x 28 x 26cm / 5kg

Series 8 Closed Cup(High Temperature)

82000-0 Ambient +5 to 300°C2°C/min ramp Aluminium Ceramic Pad, Forced Air (post-test cooldown) 25 x 34 x 38cm / 8kg

Series 8 Closed Cup(High Temperature, Gas)

82050-0 Ambient +5 to 300°C2°C/min ramp Aluminium Ceramic Pad, Forced Air (post-test cooldown) 25 x 34 x 38cm / 8kg

Series 8 Activecool 82100-0 Air: 10 to 130°CWater Assisted: -20 to 130°C

2°C/min ramp Aluminium Peltier Cell 25 x 34 x 38cm / 8kg

Series 8 Activecool(Gas)

81150-0 Air: 10 to 130°CWater Assisted: -20 to 130°C

2°C/min ramp Aluminium Peltier Cell 25 x 34 x 38cm / 8kg

Series 8 Activecool(Corrosion Resistent)

82150-0 Air: 10 to 130°CWater Assisted: -20 to 130°C

2°C/min ramp Corrosion resisting steel Peltier Cell 25 x 34 x 38cm / 8kg

Series 8 Activecool(Corrosion Resistent, Gas)

82160-0 Air: 10 to 130°CWater Assisted: -20 to 130°C 2°C/min ramp Corrosion resisting steel Peltier Cell 25 x 34 x 38cm / 8kg

Setaflash Small Scale Flash Point TestingASTM D3278; ASTM D3828; ASTM D7236; ASTM E502; IP 523; IP 524; IP 534; IP 303 (obs); ISO 3679; ISO 3680 (obs); CLP Regulations

Flash point is a key property for products and chemicals and is included in many specifications. Setaflash methods cover flash point tests within the range –30 to 300°C using a small scale closed cup tester. The procedures can determine whether a product will or will not (flash/no flash Method A) at a specified temperature, or the flash point of a sample (Method B).

The small scale ‘ramp’ test method ASTM D7236 provides a definitive flash point result that has established correlation with ASTM D3828. Many specifications call for the use of these test methods as an alternative to ASTM D93 Pensky-Martens or ASTM D56 Tag and other flash point tests.

View a demo video at: www.stanhope-seta.co.uk/setaflash.html

Learn more: www.stanhope-seta.co.uk/small-scale-flashpoint-testing.asp

› Series 3 (33000-2)

› Series 8 (82000-0)


Product Profile

4

5

The Seta PM-93 is a fully automated Pensky-Martens Closed Cup Flash Point Tester which combines state of the art control technology and safety systems to provide the next generation of automated precision flash point instruments.

Seta PM-93 provides rapid sample testing using integral heating and forced air sample cooling systems. An intuitive user menu and colour touch screen operation provide ease of use with real time display of test progress. Large capacity memory allows storage of test profiles, operator names, test methods and in excess of 2000 results.

Unique test profiles enable the test to be set up and repeated quickly without re-entering the test parameters. For example, if numerous ‘diesel’ samples with similar expected flash points are being tested then a test profile can be created and stored to memory so the user can repeatedly select this option.

Operation is simple, the single action lifting arm is aligned so the lid and cup locate perfectly when loading or removing the test cup. The lid and shutter are integral to a hinged pod and fitted with a fire detection probe, fire extinguishing manifold, ignitor, flash detector and temperature probe. The stirrer drive, shutter actuator and ignitor dipping mechanism are also self contained within the pod module.

The ignition source is a purpose-designed extended life hot wire, a gas ignition option is also included. The sample temperature probe is a class A PRT and flash detection is by a thermocouple.

An optional, unique ‘SafeFlash’ fire extinguishing system (35002-0) is available which automatically and immediately activates an extinguisher in the event of excess flame or fire around the test cup. If discharged the screen prompts the user to re-activate the extinguisher by simply replacing the gas canister. Canisters remain sealed inside the instrument until pierced by the actuator mechanism.

Additional safety features include PRT checks, safety dip before starting, over-temperature cut out, gas flame relight and gas shut off.

A password protected ‘calibration’ mode quickly allows verification of instrument performance (a range of traceable verification and calibration materials are available from Seta).

Cleaning & maintenance procedures are simple. The instrument’s lid and shutter can be cleaned in-situ to minimise down time between tests and a quick release mechanism allows easy access to the lid and shutter for maintenance.

View a demo video at: www.stanhope-seta.co.uk/pm-93-flashpoint.html

PM-93 Pensky-Martens Closed Cup Flash Point Tester (35000-0) ASTM D93; IP 34; ISO 2719 Procedures A, B and C

Ignition system: Electric hot-wire or Gas flame

Flash detection: Thermal

Cooling: Forced air (integral fan)

Heating Rate: Fast heating mode (>15°C/min) and standard rate; 5.5°C/min; 3°C/min; 1.3°C/min; 1°C/min

Temperature range: Ambient +5 to 400°C (Ambient +41 to 752°F)

Barometric pressure correction: Automatic correction with built-in pressure sensor

Fire Detection: Thermal. Optional integral inert gas Fire Extinguisher (35002-0)

Size (HxWxD) / Weight: 38.5 x 24 x 50cm / 25kg

Multiflash Automatic Multi-Method Flash Point Testers

Seta Part No: 34300-2 34200-0 34400-0 34700-0

Method: Cleveland Abel TAG Small Scale

Cup Type: Open Cup Closed Cup Closed Cup Closed Cup

Mode: Flash point and Fire point Non Equilibrium, Equilibrium Non Equilibrium, Equilibrium, Flash/No Flash

Ramp, Equilibrium

Temperature Range: Ambient to 400°C (752°F) Ambient to 93°C (199°F)(5 to 93°C with cooling)

Ambient to 93°C (199°F)(5 to 93°C with cooling)

Ambient to 300°C (572°F)(-20 to 300°C with cooling)

Ignition Method: Electric or Gas Electric or Gas Electric or Gas Electric or Gas

Flash Detection: Ionisation Ring Thermocouple Thermocouple Thermocouple

Bath Type: - Liquid/Liquid Liquid Solid Block

Size (HxWxD) / Weight: 34 x 47 x 42cm / 12kg 44 x 47 x 42cm / 12kg 34 x 47 x 42cm / 12kg 34 x 47 x 42cm / 12kg

› 34200-0

• Easy ‘3-step to test’ operation involving minimal operator intervention

• Unique ‘SafeFlash’ fire extinguishing system

• Large touch screen

• Single action lifting pod

• Small, compact footprint

• Seta ‘Ignite’ - robust and long lasting ignitor

• 30 programmable test profiles, test methods & sample names

• Rapid fan assisted cooling

• Optional barcode reader available

› 35000-0

CLEVELAND (ASTM D92); ABEL (IP 170); TAG (ASTM D56); SMALL SCALE (ASTM D3828)

Multiflash is a highly automated low cost modular flash point system with in-built safety features. It provides a ‘4 in 1’ solution for all primary flash point tests using a universal base & interchangeable test modules.


5


6

Vapour pressureVapour pressure is an important physical parameter which must be monitored in the manufacture and use of many fluids. It is defined as the pressure at which a liquid and its vapour are in equilibrium at a definite temperature.

Vapour pressure is critical to quality control and the performance of both automobile and aviation gasolines. It affects start up, warm up, tendency to vapour lock and provides an indirect measure of potential emission levels. Vapour pressure affects the drying time of solvent-based products and is often important in identifying potential safety characteristics when a liquid, such as crude oil, is stored or transported.

Setavap3 Automatic Vapour Pressure Analyser (80500-0) ASTM D5191; ASTM D6378; ASTM D6377; ASTM D6897; ASTM D5188; IP 394; IP 481

Correlates with ASTM D323; ASTM D4953; ASTM D5190; ASTM D5482; ASTM D1267; EN 13016; IP 409

• Rapid automatic vapour pressure testing

• Mini methods - 1ml sample volume

• Integrated shaker for testing Crude Oils

• Robust measuring chamber/Valves/Piston Mechanism

• Results available as DVPE, RVPE, VPx, Ptot, TVP, Pabs ASVP

• Test memory: in excess of 10,000

SetaVap3 incorporates the very latest technology to provide reliable automated vapour pressure tests on fuel and oil samples. The instrument has been designed to provide users with unsurpassed ease of operation and incorporates a sturdy measuring chamber and sliding piston with integral shaker.

Easy to use but powerful software allows both standard testing and customised test parameters to be entered. A large colour touch screen allows simple operation with ‘press to test’ functionality for minimal operator input.

Results are clearly displayed and can be captured using a QR code, emailed, saved to a memory stick, output to LIMS or produced in hard copy with the printer option.

Servicing and calibration can be performed in the field.

Temperature Range: 0 to 120°C

Test Pressure Range: 0 to 1550kPa (resolution as per method)

Units of Measurement: kPa or psi (user selectable)

Power Requirement: 100/240V Vac, 50/60Hz (auto), 230W

Size (HxWxD) / Weight: 38 x 23 x 37cm / 16kg

Setavap2 Rapid Automatic Vapour Pressure Tester (81000-2) ASTM D5191; IP 409; IP 481; IP 394; EN 13016; Correlates with ASTM D323; D5842; D6378; IP 69

• Multi-Mode - Ptot, DVPE, EPA, Crude, Pabs

• Fixed Liquid/Vapour ratio

• “Mini” method uses only 3ml sample size

• Automatic Drain and Purge

SetaVap2 is highly automated with step by step instructions and prompts being displayed on the control panel. Once the test procedure has been started operator intervention is only required to inject the sample into the chamber, even the purging and cleaning cycle is carried out automatically.

Visit: www.stanhope-seta.co.uk/2984/Setavap-2-Vapour-Pressure-Tester

Test Pressure Range: 0 to 200kPa ±0.5kPa (0.1kPa resolution)

Units of Measurement: kPa or psi (user selectable)

Chamber Temperature: 37.8°C (100°F) ±0.1°C

Modes: Ptot, DVPE, EPA, Crude, Pabs

Power Requirement: 115Vac or 220Vac (switchable), 50/60Hz, 70W

Size (HxWxD) / Weight: 37 x 13 x 20cm / 3.5kg

› 81000-2

› 80500-0


Product Profile

6

7

Maximum RCF: 2214g

Maximum RPM: 3000

Temperature Range: 30 to 80°C (± 1°C) (86 to 176°F)

Timer Range: 1 to 60 minutes in 1 minute steps, Continuous Operation

Rotor Capacity: 4 or 6 place samples (order reference 90100-0 for 6 place)

Power Requirement: 230Vac (110V transformer option) 50/60Hz / 1kW


Seta Oil Test Centrifuge for Sediment & Water ASTM D91; D96 (Obs); D893; D1290; D1796; D1966; D2273; D2709; D4007; IP 75 (Obs); IP 539 (Obs)

• Heated chamber, ambient to 80°C

• Static, near vertical bucket positioning

• 4 or 6 place swing out rotor

• Pre-heat facility to ensure bowl is at test temperature prior to test

• Conforms to IEC 1010-1 & 1010-2-D safety requirements

With a temperature range of 30 to 80°C and a rotational speed of up to 3000rpm, this heated chamber centrifuge is specifically designed for testing oils. The large diameter chamber, with four or six place rotor and cushioned adaptors, allows the use of 6 and 8 inch conical, pear-shaped, trace sediment and 12.5ml tubes as specified by the various test methods. The swing out rotor ensures that the samples are held near vertical when at rest allowing more precise measurement of sediment.

An optional hazard reduction system extracts vapours and gases released from volatile samples.

4-Place Centrifuge (90000-3) : www.stanhope-seta.co.uk/3943

6-Place Centrifuge (90100-0) : www.stanhope-seta.co.uk/4807

Centrifuge Tubes• 100ml Long & Short Cone, Trace Sediment, and 12.5ml Finger Tubes

• Manufactured in strict compliance to test methods

• Permanently etched graduations

• High visibility white lined markings

• Optional factory certified, 7 point, long cone tubes

Salt Content in Crude Analyser (99700-6)ASTM D3230; IP 265

• Automatic salt concentration calculation

• Pre-calibrated for immediate use

• Interchangeable sensor

• 3 operating modes (ASTM, IP, user defined)

• Battery or mains voltage operation

• Moistureproof

A portable instrument for determining the approximate chloride (salts) content of crude oils. The instrument is pre-calibrated and automatically calculates the salt concentration in g/m3 or pounds per thousand barrels (ptb) (lb/1000bbl). Measurements can be displayed or downloaded to a PC. The instrument is supplied with carry case, mains adaptor, software, RS232 cable and instruction manual.

View Demo: www.stanhope-seta.co.uk/Salt-in-Crude.html

SaltCheck Verification Tool (99703-0)A set of 3 ‘SaltCheck’ verification modules, supplied in a convenient storage case. The modules are calibrated to show equivalent salt values of:

• 0 g/m3 | 30 g/m3 | 190 g/m3

Instrument verification is easy - simply switch the instrument on and place the sensor into each ‘SaltCheck’ module to confirm that the correct reading is being displayed. Saltcheck is supplied with a certificate of verification.

Visit: www.stanhope-seta.co.uk/4716/Salt-Check-Verification-Tool

Conductivity range: 0 .0 to 151 lb/1000bbl (Res: 0.1lb/1000bbl) 0.0 to 430.0 g/m3 (Res: 0.1 g/m3)

Temperature range: -20°C to 150°C (Res: 0.1°C) (-4 to 302°F)

Power supply: 9 volt dc battery or mains adaptor 110/240v, 50/60Hz adaptor supplied

Size (HxWxD) / Weight: 20 x 7 x 3.5cm / 1.6kg (including carry case)

› 99701-0 Base Stand (optional)

› 90000-3

› 6-way Rotor

› 99700-5

› 99703-0

Crude Oil TestsTests on crude oil include those which assist with commercial valuation as well as hazardous material classification. Monitoring crude-oil sediment and water content is essential in crude-oil custody transfer operations. The residual content of unwanted impurities is measured as ‘BS&W’ and typically separated at site to minimize the volume that needs to be transported further.

Desalting is usually the first process in crude oil refining and salt content is measured to assist in preventing the buildup of potentially corrosive components in downstream production facilities.

› Centrifuge Tubes


7


8

Filtration Kit for IP 440 & EN 12622 (19720-0)IP 440; EN 12662

Filtration Kit for the determination of contamination in middle distillates, diesel fuels and fatty acid methyl esters (FAME).

Comprises; 0.8 micron Filter, Filter Membrane, stainless steel Filter Holder with stainless steel screen, Filter Forceps, Vacuum Filtering Flask, 1 litre Beaker, Watch Glass, and Tubing.

Visit: www.stanhope-seta.co.uk/3774

A Filtration Kit for ASTM D7321 is also available (19730-0)


Crude Oil Filtration Apparatus (19727-0)ASTM D4807

The Crude Oil Filtration Apparatus determines the sediment in crude oils by membrane filtration in accordance with ASTM D4807. This test method has been validated for crude oils with sediments up to approximately 0.15 mass %.

The Apparatus comprises: Insulated Funnel with heating coil (2 parts), bung, clamp, pack of filters (100), Seta steel stand, boss head, clamp, tubes with valves and clips, Buchner flask (500ml), grounding kit including mat, grounding cable assembly, earth bonding plug, earth bonding cord.

Visit: www.stanhope-seta.co.uk/4867/Crude-Oil-Filtration-Apparatus-ASTM-D4807 › Filtration KIt (19727-0) shown with Circulating

Bath (19728-0) and Air Pump (19725-2)

› Filtration Kit (19720-0) shown with Air Pump (19725-2)

Seta Cloud and Pour Point Cryostat (93531-7)ASTM D97; IP 15; ISO 3016; FTM 791 201; Pour Point of Petroleum Products ASTM D2500; IP 219; ISO 3015; Cloud Point of Petroleum Products

• Four Individually temperature controlled compartments, 16 test positions

• Four air wells in each compartment

• 2 litre bath capacity in each compartment

• Three compartments ambient to -35°C

• One compartment -35°C to -51°C

• ‘CFC free’ refrigeration system

• Heated ‘anti-condensation’ lid

The Seta Cloud and Pour Point Cryostat is a floor standing unit with four independently temperature controlled compartments each accommodating four Air Wells. The lid is electrically heated to prevent the formation of ice and condensation.

Visit: www.stanhope-seta.co.uk/3892/Seta-Cloud-and-Pour-Point-Cryostat

Seta Compact Cloud and Pour Point Cryostat (94100-3)• Three compartments, 12 test positions

• Independently Temperature controlled between ambient to -34°C

The Seta Cloud and Pour Point Cryostat is a compact unit with three independently temperature controlled test compartments, each can accommodate up to four sample wells.

Visit: www.stanhope-seta.co.uk/3891/Seta-Compact-Cloud-and-Pour-Point-Cryostat

SPECIFICATION: Cloud & Pour Baths

Seta Part No. 93531-7 94100-3

Temperature Range: Ambient to -51°C Ambient to -34°C

Compartment Volume: 2 Litres 2 Litres

Test positions: 16 12

Cool Down Time: Approx 2 hrs (from 32°C to -51°C) Approx 1 hr (from 32°C to -34°C)

Size (HxWxD) / Weight: 95 x 63 x 63cm / 115kg 60 x 60 x 85cm / 115kg

› 93531-7

› 94100-3


Product Profile

8

9Stanhope-Seta, London Street, Chertsey, Surrey, KT16 8AP, UK t: +44 (0) 1932 564391 | e: [email protected] | www.stanhope-seta.co.uk

9


Seta Cold Soak Test Bath (91665-0)ASTM D7501; IP PM-EA; CGSB-3.0 No 142; CEN N 403; ASTM D6751; EN 14214

• 4 x 500ml sample bottle capacity

• Pre-programmed Cold Soak test conditions

• Automatic warm up after 16 hours

• Integral Cooling and Heating, -20 to 80°C

• Suitable for pre-conditioning samples at 60°C

The Seta Cold Soak test bath is a specially designed bench top unit with programmable digital temperature control suitable for cooling and heating samples.

View a demo video at: www.stanhope-seta.co.uk/4740/Seta-Cold-Soak-Test-Bath

Seta Multi Filtration Tester (91600-3)ASTM D2068; IP 387 (A, B); ASTM D7501; IP PM-EA Cold Soak Test Method for EN 590 Biofuel and EN 14214 FAME material; CEN N 403

• Portable test for filterability/blocking tendency

• Test parameters for IP 387 and ASTM D2068 test are pre-programmed

• Automatic calculation of FBT and F-QF

• Simple calibration/verification of flow, pressure & temperature

• Compact and easy to use

• Result in less than 15 mins

• Interface for PC or Printer

• PC Software available

The MFT is a unique instrument designed to test the Filter Blocking Tendency (FBT) of diesel, biodiesel (B100 & B5/7/20/30), gas oil, gas turbine fuel and kerosene.

FBT analysis is achieved by measuring the pressure differential across a disposable filter. Fuels which have a high FBT could potentially block filters in the distribution network or during use in a vehicle or power plant.

The MFT is also used to determine the FBT for Biofuels which have been ‘cold soaked’ at a temperature just above zero celsius. During the 16 hour cold soak particles of saturated monoglycerides and sterol glucosides can be formed which do not dissolve when the temperature is raised back to ambient. The MFT procedure is able to detect fuels containing these particles.

PC software enables the pressure versus time plots to be stored dynamically, compared against one another and output in a variety of formats to enable data analysis in Excel for example.

Visit: www.stanhope-seta.co.uk/3895/Seta-Multi-Filtration-Tester-(MFT)

› 91665-0

› 91600-3

FBT Verification Material (91668-0)The material is used to check calibration of the Multi Filtration Tester, including verification of filters, according to IP 387 Procedure B and as referenced in IP PM-EA and CEN N 403. The methods recommend use of a certified verification fluid with a nominal FBT of 2.00, a certificate stating the precise value is supplied with the verification material.

The FBT verification material is produced gravimetrically using a balance traceable to internationally recognised standards and is supplied in a 500ml bottle.

Filter Blocking Tendency (FBT) provides a useful fuel quality parameter to evaluate the cleanliness of middle distillate fuels and biodiesel and biodiesel blends. Also to assess low temperature operability.

Filter Blocking Tendency & Cold Soak FBT

Seta Part No: 91600-3

MFT Filter Blocking Tendency (FBT) Range: 1.0 to 30 (low number best)

Maximum Pressure: 200kPa

Power Requirement: 110/120Vac or 220/240Vac (switchable)



Temperature Range: -20 to +80°C (-4 to +176°F)

Temperature Stability: ±0.02°C

Bath Liquid Capacity: 12 litres)

Refrigerant: CFC free, Single Stage R507

Cool Down Time: Approx. 45 minutes from 25 to 1°C


Seta Cold Filter Blocking Tester (91670-2)ASTM D2068, IP 387, IP 618

• Fully compliant to national annex to BS EN 590

• Automatic calculation of CFBT and CSCFBT

• Portable design

• Easy to use, fully automated

• Fixed and programmable temperatures

• Typical 20 min test time for 2 temperatures

The Seta CFBT is a small scale laboratory analyser which measures the Cold Filter Blocking Tendency (CFBT) of diesel and gas oils. The CFBT predicts how diesel fuel may behave at low ambient temperatures by replicating vehicle/engine field cold conditions and testing the fuel’s filter tendency.

Visit: www.stanhope-seta.co.uk/ 5426/Seta-Cold-Filter-Blocking-Tester-(CFBT-&-CSCFBT)


Pump Rate: 20ml/min, adjustable in software

Sample Size: 750ml

Temperature Range: -5ºC to +40ºC

Size (HxWxD) / Weight: 35.5 x 52 x 54cm / 15kg

› 91670-2

10

Carbon ResidueTypically called up in base oil and fuel oil specifications this test provides an indication of carbon deposits that may remain after exposure to high temperatures. Two tests cover this property, ASTM D4530 - Micro carbon residue and ASTM D189 Conradson Carbon residue. The tests require different volume of sample, ASTM D4530 is accepted as the referee test. A third test, ASTM D524 Ramsbottom Carbon residue is also sometimes used and can be correlated to D4530 and D189.

Micro Carbon Residue Tester (97400-3)ASTM D4530; IP 398; ISO 10370; Carbon Residue (Micro Method)

• Carbon residue range 0.1% to 30.0% (m/m)

• 12 sample capacity

• Automatic temperature ramp and gas control

• Digital display flowmeter

• Equivalent to ASTM D189; IP 13

• Temperature range ambient to 500°C

The Seta MCRT is an automatic instrument designed to run tests to determine the carbon reside formed after evaporation and pyrolysis of petroleum products as per ASTM and IP test methods. The instrument comprises of an oven and insulating lid with curved top plug as defined in ASTM D4530 and IP 398.

The digitally controlled furnace has a temperature range of ambient to 500°C. Temperature, flow and pressure values are automatically controlled and values are displayed on the control panel. The test cycle includes an audible ‘end of test’ alarm. A 6 place holder for 16ml sample tubes and a 12 place holder for 2ml or 4ml sample tubes are supplied with the instrument. The instrument has an integral condensate trap and exhaust outlet connection that allows fumes to be vented remotely if testing is not carried out under a fume hood. Low pressure and dual over-temperature cut-outs ensure safe operation. Fan assisted air cooling minimises time between tests.

Visit: www.stanhope-seta.co.uk/4882/Micro-Carbon-Residue-Tester

Temperature Range: Ambient to 500°C ±2°C

Ramp Rate: 10 to 15°C/min

Thermocouple: Iron - constanton

Pressure controller: 20 to 750kPa

Primary pressure: 1400kPa max

Flowmeter: 0.1 to 1 litre/min

Flow Rate: Automatic, 150ml/min or 600ml/min

Consumption: Approx. 40l/N2 per test

Power: 1.6kW

Voltage: 110/120V, 50/60Hz 220/240V, 50/60Hz


› 97400-3

Gum ResidueSeta Existent Gum Solid Bath ASTM D381-IP 131; IP 540; BS 2000 Part 131; BS 4348 (obs); ISO 6246; DIN 51 784; NF M07-004; FTM 791 3302

• 5 Test stations

• Suitable for Air & Steam or Air only operation

• Integral steam superheater (12200-3 only)

• Digital temperature control

• 140 to 260°C temperature range

• Flow gauge calibrated for air and steam

A Solid Block Bath designed to carry out up to five simultaneous tests for determining existent gum content in fuels by the Jet Evaporation method.

Air & Steam (12200-3): www.stanhope-seta.co.uk/2557

Air only (12210-0): www.stanhope-seta.co.uk/5038

Air & Steam (12200-3) Air Only (12210-0)

Operating temperature range: 140 to 260°C (±5°C) (284 to 500°F)

Heaters: Integral steam superheater

Operational Requirement:Steam Generator or Rotary

CompressorRotary Compressor

Over-temperature cut-out: 280°C (adjustable)

Air/Steam inlet: 15mm o.d pipe


› 12200-3


10

Product Profile

11

Seta Solid Block Bath 4 Way (16670-0)ASTM D525; ASTM D873; BS 2000 Parts 40 & 138; EN ISO 7536; IP 138; IP 40

• Small footprint, 4 place dry block bath

• Ambient +5 to 100°C (Heat up time of 80 minutes)

• Stability ± 0.1°C

• Auto-Oxi Control Software available (15452-0)

Visit: www.stanhope-seta.co.uk/3844/Oxi-Solid-Block-Bath-4-Way

Seta Auto-Oxi Control System Software (15452-0) Supports ASTM D525/IP 40; ASTM D873/IP 138; ASTM D5304

• Software for use with water or dry block baths

• Automatic Monitoring of up to 4 pressure vessels

• Incorporates purge and leak test

• Automatic breakpoint determination

• Graphical display

• Connects to Seta Pressure Transducers, by USB

• Connects to a PC via USB Data Cable

The Seta Auto-Oxi software is a data capture system for simultaneously monitoring up to four pressure vessels in accordance with Test Methods ASTM D525, ASTM D873/IP 138 and ASTM D5304. Test profiles are pre-programmed allowing rapid test selection and start, alternatively users can easily customise test profiles.

Visit: www.stanhope-seta.co.uk/4765/Seta-AutoOxi-Control-System

Seta TOST Solid Block Bath (16640-0) ASTM D943; IP 157; ISO 4263; *Alternative to ASTM D2274-IP 388

• Suitable for TOST tests and as an alternative to liquid filled baths

• 12 positions dry block bath

• Ambient to 100°C temperature range

• Integral Setatemp controller

• Seta Oxflo Controller and flowmeters included

Visit: www.stanhope-seta.co.uk/3478/Seta-TOST-Bath

Tost Dry Block Bath - 6 Way with Oxflo (16645-0)


Oxidation Bath - 6 way with Oxflo Controller (16900-6)

Visit: www.stanhope-seta.co.uk/4462/Oxidation-Bath-with-Oxflo-Controller

Seta Oxi-Corrosion Bath (15550-3)ASTM D130; D4048; D4814; D525; D5304; D873; BS 2000 Parts 40, 112, 138 & 154; EN 2160; IP 112; IP 138; IP 154; IP 227 (obs); IP 40; ISO 7536

• 35 Litre Liquid bath for Copper/Silver Corrosion and Oxidation tests

• Ambient +5 to 150°C temperature range

• Small footprint

• 4 test stations (3 when used for Oxidation tests)

Visit: www.stanhope-seta.co.uk/4459/Seta-Oxi-Cor-Bath

Seta Copper Silver Block Bath (11310-0)ASTM D130; ASTM D7667

• ASTM D7667 Thin silver strip corrosion & ASTM D130 Copper corrosion

• Dry heating for up to 4 test samples (25 x 150mm test tubes)

• Operator can select test set point temperature between 50 to 150°C

• Stability ±0.1°C

• Over temperature cut-off

Visit: www.stanhope-seta.co.uk/4951/Seta-Copper-Silver-Block-Bath

› 16640-0

› 11310-0

› Solid Block Bath (16670-0) with Transducers (15455-3)

› Test in progress › Test Result with breakpoint indicated

Oxidation CharacteristicsOxidation stability provides an indication of the service life of a petroleum product and the potential for the product to deteriorate in the presence of oxygen. The oxidation process can produce acids which lead to corrosion and sludge that can block filters. Fuels and Lubricating oils require different test techniques, many are designed to accelerate the oxidation process by the use of higher temperatures and pressures. A number of instruments are available from Seta to determine the oxidation stability of a product and a small sample is shown below, more can be found on the Seta website.


11


12

Viscosity Viscosity is the relative ability of a fluid, or semi fluid, to flow and must be measured at extremely precise temperatures. The viscosity of a fluid is important when analysing product behaviour and is applicable to petroleum products ranging from greases to lubricating oils and fuels. Seta offer a range of baths and glass viscometers suitable for determining the viscosity of a wide range of products. All Seta baths are supplied with temperature stability traces and the KV-2 bath shown below has been specifically designed for JET Fuel applications.

KV-6 Viscometer Bath (84200-2) ASTM D445-IP 71; ASTM D446; ASTM D2170-IP 319; BS 188, BS 2000 Parts 71 & 319; DIN 51 366; DIN 51 562; EN 12595; EN 3104; FTM 791 305; ISO 3105; JIS K2283; NF T60-100; NF T60-136

• Up to 6 viscometer tubes

• 50 litre oil/water bath

• Temperature stability ±0.002 at 40°C, ±0.005 at 100°C and ±0.01 at 150°C


• Digital display with 0.01°C resolution

• Toughened glass front panel &Integral back lighting

The Seta KV-6 has a 50 litre temperature controlled bath that can accommodate up to six standard viscometer tubes. Digital temperature control and an inbuilt cold water cooling coil provide accurate and stable test temperatures from ambient to 150°C. The bath is protected by low liquid level and overtemperature cut-outs.

The bath is equipped with a toughened glass front window, easily accessible drain valve, integral back lighting, top plate, and provision for reference thermometer and attachments.

Visit: www.stanhope-seta.co.uk/4472/KV6-Viscometer-Bath

KV-2 Low Temperature Viscometer Bath (94710-3) ASTM D445-IP 71; ASTM D446; BS 188; BS 2000 Part 71; ISO 3104; ISO 3105; DIN 51 561; NF T60-100; FTM 791 305; JIS K2283 and BIS IS 1448 Part 25.

• Temperature range -40°C to +20°C

• High stability ±0.015 at -20°C, ±0.01 at -40°C

• Accommodates up to 2 standard viscometer tubes

• Illuminated bath

• Insulated and heated viewing window

• Heated top plate

The Seta KV-2 is a two place low temperature viscosity bath designed to achieve ultra-high stability in the temperature range of +20 to -40°C. The instrument has a small footprint and is ideally suited for busy labs. Stability is better than ±0.015 at -20°C and ±0.01 at -40°C .

The bath is fully self contained and requires no external chillers or connections. A heated top plate and viewing window prevent condensation and ice formation, this, combined with high intensity long life ultra-bright LED lighting ensures clear bath visibility at all times. Data logging via the external RS-232 port is possible when connected to a PC and software.

Each bath is provided with a factory calibration certificate, traceable to UKAS including temperature traces. Customers can request specific temperature calibrations and traces if required, ensuring that the product meets their exact requirements.

Visit: www.stanhope-seta.co.uk/4872/KV-2-Low-Temperature-Viscometer-Bath

SPECIFICATION: Viscosity Baths

Seta Part No. KV-6 Bath: 84200-2 KV-2 Bath: 94710-3

Temperature Range: Ambient to 150°C (302°F) -40°C to +20°C

Temperature Stability: ±0.002 at 40°C, ±0.005 at 100°C, ±0.01 at 150°C ±0.015 at -20°C, ±0.01 at -40°C

Tube Capacity: up to 6 up to 2

Bath Fluid: Oil or Water Methyl Alcohol or Denatured Ethyl Alcohol

Bath Capacity: 50 Litres 2.9 Litres


› 84200-2

› 94710-3

Viscometer Start-up Kits

• Cannon Fenske Opaque Starter Kit (84210-0)

• Cannon Fenske Routine Starter Kit (84211-0)

• Ubbelohde Starter Kit (84212-0)

• U Tube Reverse Flow Starter Kit (84213-0)

• BS U Tube Kit (84214-0)

• Low Temperature Ubbelohde Starter Kit (94712-0)


12

Product Profile

13

Seta Autowash (14024-2) ASTM D892; D6082; IP 146

• Automatic & unattended cleaning of diffuser and air tube

• Up to 10 factory washing programs available

• Up to 2 solvents can be used

• Low solvent use

• No operator exposure to solvents

• Quick and simple operation

• Unidirectional flow

The Seta Autowash is a bench top unit that automatically cleans and dries Diffusers using one or two solvents without removing the air tube. Automatic wash programmes provide a consistency of cleaning that has significant benefits in assisting to provide reliable and repeatable foam test results.

Supplied complete with vacuum pump and solvent containers.

View a demo movie at: www.stanhope-seta.co.uk/autowash-movie.asp

› 14024-2

Temperature Range: Ambient to 100°C, ±0.5°C

No. of Baths: 2

No. of Cylinders: 4 (2 per bath)

Cylinders: 1000ml, borosilicate glass, graduated

Diffuser: Mott or Norton Stone

Flowmeters: 2 per bath, 94 ±5ml/min


› 14020-8 Right hand bath shown with Digital Mass Flowmeter (14012-0)

Setafoam Dual Twin Foam Test Baths (14020-8)ASTM D892; IP 146; BS 2000 Part 146; ISO 6247; NF T60-129; FTM 791 3211; JIS K2518

• High and low temperature baths


• Up to two simultaneous tests per bath

• Two pre-heating stations per bath

• Two integral normalising coils

• Digital or Analogue flow meter options available

Setafoam Dual Twin Foam Test Baths are a pair of highly transparent water baths for detecting foaming characteristics in lubricating oils. A known volume of air is passed through foam-stones and into the sample, the height of the foam is then recorded.

Visit: www.stanhope-seta.co.uk/4871/SetaFoam-Dual-Twin-Foam-Test-Baths

Air Release Value Apparatus (15840-0)ASTM D3427; IP 313; BS 2000 Part 313; ISO 9120

• Integrated microprocessor and new software

• Automated and integrated density monitoring

• Automatic result calculation

• Results storage for over 10,000 tests, full LIMS connectivity

• Ambient to 75°C temperature range

• Integral sinker warming jacket & temperature indicator

• 200kPa maximum air pressure

• 23 ltr/min maximum flow rate

The Seta Air Release Apparatus is designed to determine the air release properties of hydrocarbon based oils in accordance with ASTM, IP and other methods.

The apparatus is a benchtop instrument with integrated density balance, heater, temperature control system, pressure regulation and microprocessor based control system. A unique slider arrangement allows easy positioning of the sinker and movement throughout the test cycle. The new integrated control system with large touch screen display prompts the user through all stages of the test.

› 15840-0


13


14 Stanhope-Seta, London Street, Chertsey, Surrey, KT16 8AP, UK t: +44 (0) 1932 564391 | e: [email protected] | www.stanhope-seta.co.uk

14

Herschel Emulsifier (96700-2)ASTM D1401, IP 412, ISO 6614

• 4 independently controlled test stations

• Multiple operator safety features

• Motorised raising and lowering

• Automated test sequence

• Intermediate scraping position

• Integrated timing

• Easy handling and removal of sample

• No removal of the paddles required

• Guaranteed paddle rotation speed

• Non-reflective enhanced LED lighting

• Large viewing window

• Large LCD touchscreen display

• Small footprint

• Intuitive software package

The Herschel Emulsifier is a compact and efficient benchtop instrument designed to measure the ability of petroleum oils and synthetic fluids to separate from water.

The instrument incorporates 4 test stirrers, with independent control and motorised raising and lowering. Samples can be tested simultaneously or individually to suit laboratory requirements.

Test cylinders are located in a temperature controlled bath with an adjustable set point of either 54 or 82°C, in accordance with ASTM and ISO test methods.

A large LCD touch screen display is used to initiate test and provides automated sequencing with an audible and visual reminder at each recording interval..

The apparatus is a benchtop instrument with integrated density balance, heater, temperature control system, pressure regulation and microprocessor based control system. A unique slider arrangement allows easy positioning of the sinker and movement throughout the test cycle. The new integrated control system with large touch screen display prompts the user through all stages of the test.

› 96700-2

Bath Volume: 5 litres

Bath Liquid: Water or white oil

Sample Size:40ml oil, 40ml distilled water, 1% sodium chloride solution or synthetic seawater

Temperature Range: 54°C and 82°C

Bath Temperature Stability:

±1°C

Stirrer Speed: 1500 ± 15 rpm

Voltage: 110 Vac, 50/60 Hz 240 Vac, 50/60 Hz

Display: LCD touchscreen


Independent control allowing for simultaneous or individual testing

User adjustable test parametersTimer ‘prompt’ at recording intervals to aid visual measurements

Operator Interface and Integrated Timing

Product Profile

15

4-Ball and Shear StabilityThe 4-ball instruments are used to perform wear tests, Extreme Pressure (EP) tests and also shear stability tests. EP and wear tests are typically used to determine a lubricating oil or greases ability to continue to perform when subjected to high load conditions. Shear Stablity testing is used to determine a lubricants resistance to viscosity loss when it is passed through narrow passageways such as bearings or gears.

Seta-Shell 4-Ball Lubricant TestersASTM D2266; D2596; D2783; D4172; IP 239; EN ISO 20623; CEC-L-45-99; ISO 26422; FTM 791 6503; DIN 51320

• Applied loads range up to 800kgF

• Drive speed from 1200 to 1760rpm

• Digital timer and display with selectable range 0.1s to 9999hr

• Digital displays and microprocessor control of Applied Load and Torque (19900-3)

• Automatic Torque limiting and cut-off

• Interlocked guards for maximum safety

• Optional heating pad and controller

The Seta-Shell 4-Ball lubricant testers are floor standing instruments designed to measure the properties of lubricating oils and greases in accordance with a wide range of ASTM, ISO and IP standards. The 19800-7 instrument features manual loading, with automated timing and torque cut-off functions. The 19900-3 features microprocessor control of loading and torque. Both units feature variable speed control and digital timers. The testers are rugged and are designed for high duty cycles, ensuring many years of operation.

View a demo video: www.stanhope-seta.co.uk/4-ball-lubricant-test-oil-ASTM-D2783.html

SPECIFICATION: 4-Ball Lubricant Testers

Seta Part No. 19900-3 (Autoload) 19800-7 (Manual load)

Speed Range: 1200 to 1760rev/min 1200 to 1760rev/min

Load Range: 40 to 800kgF 0 to 800kgF

Timing: 0.1s to 9999hr 0.1s to 9999hr

Voltage: 220/240V, 50/60Hz 220/240V, 50/60Hz

Power: 2.6kW 2.6kW


› Image capture of scar using Microscope with Digital Camera (19750-3)

Viscosity Shear Stability Head (19820-3)CEC L-45-99; ISO 26422; DIN 51320

• Temperature control via an External Chiller

• PC connectivity for temperature datalogging

• Secondary over temperature monitoring with automatic shutdown

• Quick release mounting system for easy bearing access

The shear stability head fits into the test aperture of the four ball tester and comprises of a tapered roller bearing, jacket, drive lug, thermocouple spacer ring, bearing pad and plunger spacer disk.

An integral temperature probe connects to a external temperature control system.

› Viscosity Shear Stability (19820-3)

Microscope with Digital Camera (19750-3)The Microscope is used for x/y linear measurement and allows direct viewing of the ball scar with x30 magnification. The 1.3 Megapixel CCD camera fits any Seta microscope to allow image capture of the scars and on-screen measurement of the size.

Comprises Microscope, ball holder, lamp kit, grounding wire, leads. Camera supplied with software, calibration graticule slide and a 0.45X lens, 23.2mm/30.5mm/31.5mm c-mount adapters, and USB cable.

Existing users of the Microscope can upgrade to digital measurement by purchasing the camera (19755-0).

› 19900-3


15


t: +44 (0) 1932 564391 | f: +44 (0) 1932 568363 | e: [email protected] | www.seta-analytics.com16

Roll Stability Testers (19400-3, 19400-5, 19450-0)ASTM D1831; MIL-G-10924

• 165rpm or 100 to 200rpm variable speed control*

• Air bath temperature range ambient to 200°C*

• Integral timer

• Variable speed control*

• Polished Stainless steel or Mild Steel cylinder/roller options*

• Optional venting hood for ambient tests*

*Note: some features are dependent upon model, see specification table

Seta offer three roll stability instruments which are ruggedly designed for extended periods of use. The basic instrument, 19400-3, allows testing in conformance with ASTM D1831 with an upper temperature limit of 100°C. The 19400-5 and 19450-0 instruments allow extended temperature testing with variable speed control available as an option on the 19450-0.

High Temperature with Variabe Speed Control (19450-0): www.stanhope-seta.co.uk/4887

High Temperature (19400-5): www.stanhope-seta.co.uk/4875

Standard Temperature (19400-3): www.stanhope-seta.co.uk/1026

SPECIFICATIONS - Roll Stability Testers

Seta Part No. 19400-5 19450-0 19400-3

Temperature: Ambient to 200°C Ambient to 100°C

Cylinder Capacity: Up to 4 Cylinders

Rotational Speed: 165 rpm 100 to 200rpm adjustable 10 or 165 rpm

Voltage: 110/120V, 50/60Hz or 220/240V, 50/60Hz

Power: 1.5kW 1.4kW


Water Washout Tester (19610-4)ASTM D1264; IP 215; DIN 51807-2; ISO 11009

• New case design with large access panels for test hub and pump

• Recirculating bypass valve for pre-heating

• Rapid warm up time

• Fully removable pump for servicing

• Integral bath drain

• Separate electronics compartment

• Easy to calibrate

Single bearing Tester (19610-4): www.stanhope-seta.co.uk/3479

Twin bearing Tester (19650-0): www.stanhope-seta.co.uk/4863

SPECIFICATIONS - Water Washout Testers

Seta Part No. 19650-0 19610-4

Rotation Speed: 600 rev/min 600 ±30 rev/min

Temperature Range: Up to 80°C Ambient to 80°C

Voltage: 220/240V, 50Hz 110/120V, 50/60Hz or 220/240V, 50/60Hz (switchable)


Test Capacity: Dual bath Single bath

› 19400-5

Stanomatic Dual Grease Worker (17790-2 & 17792-2)ASTM D217, ASTM D7342, IP 50, ISO 2137

• Quick release heavy duty brass or stainless steel worker cups

• Works two grease cups simultaneously

• Auto-stop at up to 99,999 strokes

• 60 ±10 strokes per minute

• Cover and plunger assemblies with 51 x ¼ inch hole perforated plates

• Safety screen with auto shut off

• Large bore cock for thermometer insertion

Two grease working assemblies comprising a heavy duty grease pot with screw lid are mounted on a cast aluminium base by dowel pins and quick release cams. A plunger passes through the lid and is attached to a perforated metal Worker Plate. A large bore grease-cock allows excess air/grease to escape during assembly and insertion of a thermometer.

Grease Worker with Brass Cups (17790-2)


Grease Worker with Stainless Steel Cups (17792-2)

Visit: www.stanhope-seta.co.uk/4699 › 17790-2

› 19610-4


16

Product Profile

t: +44 (0) 1932 564391 | f: +44 (0) 1932 568363 | e: [email protected] | www.seta-analytics.com 17t: +44 (0) 1932 564391 | f: +44 (0) 1932 568363 | e: [email protected] | www.seta-analytics.com

Laboratory Instruments for quality control, analysis and calibration

In-Line Conductivity Analyser (99500-0)ASTM D2624

• 16 Bar pressure or 100 Bar with the High Pressure Unit

• High-Accuracy AC measurement technology

• Allows precise control & measurement of SDA Additive Injection

• Stainless Steel construction

• Easily fitted and retracted from the pipeline via a retractable mount

• Can be fitted to pipes of various diameters

• ATEX, FM, FMc Certified for Zone 1, Hazardous Areas

The In-Line Analyser provides a continuous 24/7 highly accurate record of product conductivity levels inside the distribution lines. In-Line conductivity measurement provides significant benefit to operators by offering the ability to continuously measure conductivity thereby assuring continuous compliance with conductivity level requirements. It also eliminates the requirement for manual sampling and record keeping.

Visit: www.stanhope-seta.co.uk/in-line-Conductivity.html

Conductivity range: 0-600 pS/m / 0-2000 pS/m

Accuracy: ±2 pS/m or ±2% of reading

Temperature range: -20 to 60°C (-4 to 140°F)

Pressure: 16 Bar or 100 Bar

Resolution: 0.1 pS/m / 0.1°C

Process connection types: ANSI, DIN, NPT, BSP

Size (L x W) / Weight: 76 x 12cm / 6.8kg

Handheld Conductivity Meter (99708-0)ASTM D2624; IP 274; DEF STAN 91-091; ASTM D1655

• Higher accuracy AC measurement (± 1.5% of reading)

• Conductivity and temperature output capability

• Measure in any sample container

• No need to relax the fuel

• Calibration kit available

• Stores up to 8 data locations

• USB interface for ease of data transfer to user

• Fully temperature compensated measurement

The Seta D2 Hand Held Conductivity Meter (D2 JF-1A-HH model) meets the requirements of ASTM D2624. It provides an accurate and rapid conductivity measurement of distillate fuels; and is specifically designed for testing low conductivity fluids such as such as aviation kerosene, ULSD, home heating fuel, Naphtha, and printing ink.

The meter can measure fuel electrical conductivities between 0 and 2000 picosiemens/meter (pS/m), although it is optimised and normally used in the 0 to 500 pS/m range. Other ranges are available on request to measure oil and inks.


› 99714-0

Conductivity Calibration & Verification Tool (99714-0)The Calibration & Verification tool fits easily onto the tip of the Handheld Conductivity Meter for quick and easy calibration or verification of the instrument. It has one switch to easily alter the range from low value (200 pS/m) to high value (500 pS/m). This allows the user to verify or calibrate conductivity in the field thus eliminating the costly requirement of returning the instrument to the factory.

The tool is optimised for AC conductivity measurement with active components ensuring long term stability and accuracy.

Visit: www.stanhope-seta.co.uk/4663/Calibration-Kit-for-Handheld-Conductivity-Meter

Conductivity Meter for Fuels (99708-0) 0-2000 pS/m ±2 pS/m (±1.5% of reading)

Conductivity Meter for Oils (99707-0) 0-2000 pS/cm ±1.5 pS/cm (±1.5% of reading)

Conductivity Meter for Ink & Paints (99706-0) 0-10,000 pS/cm ±1 pS/m (±1.5% of reading)

Resolution: 0.1 pS/m (99708-0), 0.1 pS/cm (99707-0)

Temperature Range: 0 to 35°C (±0.1°C) (32 to 95°F)


› 99500-0

› 99708-0 with accessories

› 99708-0 & 99714-0

Conductivity MeasurementASTM D2624 is a primary test method and often the first undertaken at point of loading/delivery to determine the “safe-guarded” nature of a fuel batch. ATF is very pure, often highly refined, and has the potential to accumulate a high static electrical charge which can lead to ignition of explosive vapours. Likewise the reduced sulphur content of modern ULSD fuel creates a less conductive fuel with more potential for buildup of static charge.

17t: +44 (0) 1932 564391 | f: +44 (0) 1932 568363 | e: [email protected] | www.seta-analytics.comStanhope-Seta, London Street, Chertsey, Surrey, KT16 8AP, UK t: +44 (0) 1932 564391 | e: [email protected] | www.stanhope-seta.co.uk

17


18 t: +44 (0) 1932 564391 | f: +44 (0) 1932 568363 | e: [email protected] | www.seta-analytics.com

Product Profile

Particle CountingSeta AvCount2 (SA1000-2)IP 565; ASTM D7619; ASTM D975; Defence Standard 91-91 & 91-86

› SA1000-2

Seta AvCount Lite (SA1800-0)IP 565; ASTM D7619; ASTM D975; Defence Standard 91-91

• Cumulative Particles/ml

• ISO Cleanliness Codes

• Simple operation

• High visibility screen

• Portable

• Optional battery

• Bottle samples or On-Line

• Stand-alone or PC controlled

• Programmable via PC

• Volume or Time based

• Under three minute test time for D7619/IP 565

AvCount Lite is the latest fully automatic particle counter from Seta Analytics. The new instrument combines innovative features and rapid measurement technologies to make the Avcount Lite the most flexible particle counter available.

Avcount Lite can be used as a stand-alone instrument or connected to a PC workstation for operation. Multiple instruments can be monitored from a single PC and linked to allow trend analysis, for example monitoring particulate before and after a filter.

When used as a stand-alone instrument, the Avcount Lite is small and ideal for field use, operation is via a simple menu system using the turn and push control. Test progress and results for up to 6 size bands are displayed as cumulative particles/ml and ISO 4406 cleanliness codes on the high visibility yellow and black screen. Results are saved in memory indexed by date and time.

Method compliance is assured, and the Avcount Lite is in full compliance with all relevant standards as well as IP 565 and ASTM D7619. Optional PC software allows creation and modification of customised standards for specific applications.

Product Number: SA1000-2

Counts per Measurement (max): 600.000 (60.000 p/ml)

Sample Viscosity (max): 64mm2/s

Sample Temperature Range: 0 to 80°C

Results: Particles/ml or Particles/10ml (Test Method dependant), Cleanliness Codes, Cumulative and/or Distributive (Test Method dependant)

Measurement Volume: 10ml

Flow Rate: 30ml/min

Voltage: 100 to 250v 50/60 Hz or 24Vdc

Power: 30W

Computer interface: USB A (for memory sticks), USB B and RS232

Size (HxWxD) / Weight: 20 x 35 x 24 cm / 12kg

Calibration: ISO 11171

• Particle size ISO 11171: 4μm(c) to >70μm(c); ISO 4402: 2μm to >100μm; GOST 17216: 2μm to >200μm

• Cumulative & distributive particle counts

• Cleanliness code reporting

• Uses “Straight from the Bottle” samples

• Precise and reliable results

• Rugged case suitable for laboratory or portable use

• Typical test time of less than 6 minutes

• 16 fixed measuring channels (calibration in compliance with ISO 11171

• An upper and lower limit value can be set for each of the first 6 counting channels

• Data storage for up to 2300 measurements across 64 memories

• Internal Double Pump System downstream of measurement cell

• Optional in-line high pressure testing up to 315 Bar

AvCount2 is fully automatic once the particle count test sequence is started. The instrument flushes the cell with sample prior to commencing the measurements. A precise volume of sample is then analysed. The flushing / sample analysing sequences are automatically repeated in accordance with the selected test method.

Results are displayed on the LCD screen in real time and printed out on the integral printer as the test progresses. The results are shown for 6 particle size bands in Particles/ml and ISO Code. Results can be saved to memory for trend analysis of samples, printed out on the integral printer or downloaded to a USB memory stick.

Visit: www.stanhope-seta.co.uk/AvCount_Particle_Counting.asp


Counts per measurement (max): 600.000 (60.00 p/ml)


Test methods: 3 stored at any one time, unlimited on PC

Pre-programmed: IP 565, ASTM D7619 and ISO 4406 basic

Number of Measuring channels: 6 (stand alone), 15 (PC) programmable

Results: up to 600 internal, unlimited on PC

Automatic: Fully automatic with auto averaging

Software: PC software available

Connectivity: USB Connection to a PC

Voltage: 12Vdc, 1A

Power: Charger/Mains Adaptor 100 to 230VAC, 50/60Hz, 650mA



› SA1800-0

| Issue 1Stanhope-Seta, London Street, Chertsey, Surrey, KT16 8AP, UK t: +44 (0) 1932 564391 | e: [email protected] | www.stanhope-seta.co.uk

18

Product Profile



• Cumulative Particles/ml

• ISO Cleanliness Codes

• Up to 200 mm2/s viscosity

• 4μm(c) to 70μm(c)

• Simple operation

• High visibility screen

• Integral compressor

• 250ml sample bottles

• Stand-alone or PC controlled

• Programmable via PC

• Typically 3 minutes for ASTM D7647

The Avcount Lube is a fully configured particle counter suitable for higher viscosity samples such as lubricating and transformer oil. The instrument comprises of a particle counter and pressure delivery system.

The sample is placed in a suitable container (250ml glass bottle) which is inserted into the chamber. The chamber is closed and gently pressurized to approximately 3 bar. Once pressurized the sample can be drawn into the Avcount Lube and measured. When the test is complete the chamber is de-pressurized by turning the locking ring and releasing the mechanism. The system is designed in such a way that the sample cannot be removed from a pressurized system, ensuring maximum operator safety.

The instrument can be used as a stand-alone system or connected to and operated from a PC workstation. The particle counter additionally has the capability to run fuel samples, and using a unique pump configuration system it is possible to change the system configuration, allowing a direct flow through the cell, or the pump to be configured before or after the measurement cell.

The Sample Delivery Unit is also available separately (SA1950-0) and can be added as an accessory to any particle counter, allowing higher viscosity samples to be measured.

AvCount ProTrend (SA1810-0)Allows an operator to control an AvCount Lite or AvCount Lube from a personal computer or laptop. It allows the operator to create local custom test methods, run tests and download data. Protrend supports multiple AvCount units and can synchronise the sampling and measurement to allow trend analysis.

Seta AvCount Lube (SA1900-0)ASTM D7647; ISO 60970; ISO 11171; ISO 11500; ISO 4406

AvCount Verification Material (SA1006-0)The material is a suspension of a NIST medium test dust in a super-clean clear, mineral based, technical oil and traceable to NIST 2806 cx.

AvCount Verification Material is manufactured in accordance with ISO 11171:2016 Annex F, with the exception of the use of a clear technical oil as diluent. The certified values are statistically derived from the results of a significant number of tests conforming to IP 565, using AvCOUNT instruments calibrated in accordance with ISO 11171:2016, under ISO 9001 conditions.

The homogeneity and variability of the AvCount Verification Fluid is checked in accordance with ISO Guide 35 and the essentials of ISO Guide 34.

NOTE: Supplied in 250ml bottle with Certificate of Measurement, dual certified for 2806a and 2806b calibration.


Counts per measurement (max): 600.000 (60.000 p/ml)


Test methods: 3 stored at any one time, unlimited on PC

Pre-programmed: ASTM D7647, ISO 60970 and ISO 4406 basic

Number of Measuring channels: 6 and 15 (programmable)

Results: up yo 600 internal, unlimited on PC

Software: ProTrend PC software supplied

Connectivity: USB Connection for PC operation

Voltage: 12Vdc and 24Vdc

Power: 2 x mains adaptors 100 to 240VAC, 50/60Hz, 650mA



› SA1900-0

› ProTrend Software (SA1810-0)


19



Product Profile

FIJI FAME in Jet (SA5000-2)

FIJI FAME in Middle Distillate & Residual Fuel (SA5100-0)

FIJI FAME MultiFuel for Jet, Distillate & Residual Fuels (SA5200-0)ASTM D1655; Defence Standard 91-091; ISO 8217

ASTM D7797; IP 583 Determination of the fatty acid methyl esters (FAME) content of aviation turbine fuel (AVTUR) by Fourier Transform Infrared Spectroscopy - Rapid screening method

ASTM D7963 for Middle Distillate and Residual Fuels (Correlates to EN 14078)

• All FAME types from C8 to C22 including Coconut, Mustard, Palm, Rapeseed, Sunflower oil, Soya, Jatropha

• Analysis time 20 minutes

• Certified range 10–150 mg/kg FAME in AVTUR

• Measuring range 0-1000 mg/kg in AVTUR

• Certified range 20ppm to 20% in Middle Distillates

• Laboratory and field instrument

• Fully automatic

• Suitable for untrained operators

• No cleaning solvents required

• No pre-sample preparation required

• 50 ml sample volume

The patented Fame In Jet Instrument (FIJI) has been developed to offer the industry a rapid and easy check on Parts Per Million (ppm or mg/kg) levels of FAME in Aviation fuel using test method IP 583 and ASTM D7797.

FIJI uniquely utilises state of the art FTIR (Fourier Transform Infra-Red Spectroscopy) technology and a patented sample preparation system which allows FAME detection accuracy down to the 10mg/kg level.

FIJI can be used as a field or lab based screening tool to give a quick indication of possible FAME contamination that may then necessitate further investigations. The instrument can be used to prevent expensive testing and avoid costly delays of fuel release.

The FIJI instrument is robust, extremely simple to use and is fully automatic so no specialist operator training is involved. Tests require less than 50ml of sample and typically take under 20 minutes. Results are presented in mg/kg units together with an optional traffic light system for flagging FAME contamination levels of the fuel.

By comparison current analytical tests can take many hours, require complex equipment and demand high skill levels.

Using a unique sample preparation module the sample is pumped at a controlled flow rate though a proprietary disposable cartridge. The sample components are spectrally analysed by the FTIR and a result is displayed in mg/kg and a graphical spectrum is also shown.

The system is self-cleaning so no solvents are required. After each test the cartridge is simply and easily replaced and the instrument is immediately ready for the next sample.

Visit: www.stanhope-seta.co.uk/4524/FIJI-JF---FAME-in-Jet-Instrument

Product Number: SA5000-2 FIJI FAME in Jet InstrumentSA5100-0 FIJI DRG - Distillate & Residual FuelsSA5200-0 FIJI MultiFuel - Aviation, Distillate & Residual Fuels

Sample size: 50ml

Voltage: 100 to 250V 50/60Hz

Power: 50W max

Computer interface: 2x USB


› SA5000-2

Place SampleLoad Cartridge Press GO Test Completed

Operator Sequence

Test ‘OK’ at < 50ppm Test ‘Fail’ at >50ppm


20

Product Profile



Measurement Range: 50-100 Water Separation Index (WSI)

Temperature Range: 15°C to 35°C

Sample size: 230ml

Power: Universal, AC 85-264 VAC 42-63Hz

Outputs: USB, Digital Display


Water Separation CharacteristicsWater separation characteristics rate the ease with which a fuel, or fuel-additive combination, will release entrained or emulsified water when passed through a coalescer-type water separator.

The water coalescing property of filter materials is reduced by chemicals in the fuel called surfactants, or “surface active agents”. The presence of surfactants is problematic as it inhibits the ability of the filter to remove water droplets from aviation turbine fuel.

Water Separation Instrument - WSI (SA9000-0)ASTM D8073

• Substantial cost saving per test

• Fully automated sample handling

• Simple operation for non-chemists

• Patented Ultra Sonic Mixer

• 10 minute test duration

• Minimal operator time required (under 3 minutes)

• Sonic mixing sequences providing consistent water droplet size & stable emulsion

• Featuring an API/EI 1581 5th edition filter material

• High resolution optical water detector measuring to <1ppm water concentration

The WSI is designed to predict filter coalescer failure. The instrument is fully automatic with simple touch screen operation. The WSI features a patented Sonic Mixing Technology which eliminates any variables with water droplet size and ensures the same amount of energy is applied to each sample.

Filter cartridges use API/EI 1581 5th edition filter material which is less sensitive to weak surfactants and eliminates uncertainty over static dissipator additives, but is responsive to the presence of ester based additives.

The instrument is fully automatic with simple touch screen operation for 3 step testing.

1. Pour sample into the test beaker and fit filter cartridge

2. Enter sample, operator and filter ID’s using the simple user friendly interface

3. Press “Start”

Whilst in operation the sample is emulsified with dyed water using the ultra sonic mixer. Once emulsified the sample is passed through the filter cartridge to remove any entrained water and then to the detector. Results are calculated from the detector reading and displayed on the screen as the Water Separation Index (WSI). A high WSI, such as 100, indicates the sample coalesces and is relatively free of surfactants.

View a demo video at www.stanhope-seta.co.uk/wsi-movie.asp

› SA9000-0

› Patented Ultra Sonic Mixer

› User friendly interface

› Filter Cartridge

› Precision derived from ILS data


21



Product Profile

AFIDA (SA6000-0)

Indicated Cetane Number (ICN)IP 617; Pr EN 17155; ASTM DXXXX

Direct correlation to ASTM D613 (ISO 5165) CFR engine tests

• Integral 36 place carousel and auto sampler

• Bench top operation

• Fully automated measurement

• Very small sample volumes (approx 40ml/analysis including flushing)

• Short analysis time of approximately 25 minutes per sample

• Minimum operator time

• Calibration with industry approved PRFs

• Advanced electronically controlled high pressure fuel injection system

AFIDA is a revolutionary development providing fully automated determination of the Indicated Cetane Number (ICN) of diesel and diesel related fuels.

The Analyser incorporates a unique and patented high pressure injection system that generates fine fuel droplets similar to modern common rail injectors in most diesel engines.

A temperature controlled piezo electric injector provides rapid switching and highly repeatable fuel metering, offering improved performance and consistency when compared with solenoid controlled injectors and pintle type nozzles.

The Analyser provides very fast, efficient and calibrated ICN determinations using an integral 36 position carousel and auto sampler.

Visit: www.stanhope-seta.co.uk/5061/AFIDA---Advanced-Fuel-Ignition-Delay-Analyser

› SA6000-0

Operation

Measurement conditions: Chamber temperature: 580°C Chamber pressure: 17.5 bar Injection pressure: 1000 bar Compressed air (20.9 ± 0.5 % O

2)

Sample volume: approx. 40 ml for analysis and cleaning

Warm-up time: approx. 45 min

Analysis time: approx. 25 min per sample

Range for ICN: 35 – 85 in standard mode

Carousel Capacity: 36 Samples

Reporting

Software: LabView-based program with text export

Test Parameters: All measurement values are stored in the data file

Reports: Detailed report of test results, date and time, operator name and calibration data

Safety

External cooling: Backup power supply and liquid level sensor

Waste: Liquid level sensor

Various: Programmable Logic Controller (PLC)-based

Requirements

Operating requirements: Ambient Temperature: 10°C to 35°C (recommended 15°C to 25°C)Humidity: up to 80% non-condensing

Size (W x H x D) / Weight: 1300 x 800 x 600 mm / Approx 100 kg (excluding platform)

High pressure fuel delivery

Piezo-electric fuel injector, water cooled

Heated combustion chamber

Temperature controlled dynamic pressure sensor for ignition delay detection

Multi-hole injector nozzle


22

Product Profile



› SA4032-0 IP 570 PTS Pack

H2S Product Number: SA4000-3

VPP Product Number: SA4015-0

IP 570 PTS: SA4032-0 (quarterly)

Crude Oil Test Kit: SA4021-0

H2S Analyser range: 0-250 mg/kg H

2S in the liquid phase (0-250 ppm H

2S)

Viscosity Range: Up to 3000 mm2/s

Principle of measurement: Advanced Electrochemical sensor

Test duration: 25 minutes with VPP

Sample size: 1ml, 2ml, 5ml (depending on H2S concentration)

Diluent volume: 20ml

H2S Size (HxWxD) / Weight: 21 x 30 x 41 cm / 8kg

VPP Size (HxWxD) / Weight: 40 x 24 x 20 cm / 7.8kg

H2S Analyser with Vapour Phase Processor (VPP)TM

(SA4000-3 & SA4015-0)ASTM D7621; IP 570; ISO 8217 Marine Fuel Specification

• Measurement range from 0-250 mg/kg H2S (0-250 ppm H

2S) in the

liquid phase

• Vapour Phase Processor proven to eliminate effects of chemical interference

• A non chemical method, no wet chemistry involved

• Small lab bench footprint, fully portable operation

• Suitable for monitoring residual marine fuel blends, refinery feedstock components, cargoes & products in the distribution system and crude oils

• Critical Measurement method for Product Safety and Release

The H2S Analyser was developed with Lloyd’s Register’s ‘Fuel Oil and Bunker

Analysis Service’ (FOBAS) along with support of other major international oil companies to offer rapid measurement of H

2S in petroleum products. The VPP

accessory was subsequently developed to eliminate the effects of chemical interference and to enable the analyser to address a broader range of petroleum products. IP 570/14a Procedure A (with VPP) is now the industry recommended practice for measuring marine residual fuels and blend streams.

The H2S Analyser is an excellent tool for supporting product Quality Control and

safety ensuring product is within approved specification. It is also ideal for both product remediation treatment of feedstock components and off-spec products with fast repeat sample measurement capability.

H2S is efficiently purged from the test sample by a combination of heat and

agitation, and is measured by an advanced electrochemical sensor. The instrument offers a cost effective solution for H

2S measurement – no costly chemicals are

required and there is no need for analytical preparation by an expert chemist.

View a demo video at www.seta-analytics.com/4909/H2S-Analyser

Crude Oil Test Kit (SA4021-0) The Crude Oil kit allows the H

2S Analyser to be used with the Vapour Phase

Processor for testing Crudes in accordance with Appendix X1 of ASTM D7621.

IP 570 Proficiency Test Scheme (PTS)IP 570/14a Mandated Verification Procedure

PTS is an invaluable Quality Assurance tool allowing participants to:

• Evaluate and monitor laboratory and instrument performance

• Provide additional confidence by demonstrating compliance with laboratory accreditation requirements

• Identify inter-laboratory differences by the comparison of test results and calculated statistical parameters with other laboratories in accordance with ISO/IEC 17025.

• Identify problems such as inadequate test or measurement processes and procedures

• Identify problems with the calibration of laboratory test equipment

Visit: www.stanhope-seta.co.uk/4418/IP-570-PTS-Quarterly-membership

› SA4000-3 & SA4015-0

› New Test Vessel

› Crude Oil Test Kit

23t: +44 (0) 1932 564391 | f: +44 (0) 1932 568363 | e: [email protected] | www.seta-analytics.comStanhope-Seta, London Street, Chertsey, Surrey, KT16 8AP, UK t: +44 (0) 1932 564391 | e: [email protected] | www.stanhope-seta.co.uk

23


24

MULTI TEST VERIFICATION MATERIALS

• Highly cost effective solution to Laboratory verification requirements

• Verification to ASTM/CEN/ISO/IP

• Traceable to ISO 9001

• 18 Month Validity

99850-0 SETA MTVM - KEROSENE (JET TURBINE FUEL) 500ML

Test Name ASTM / Method Range Amount/test

Density IP 365 0.798 to 0.807kg/l 2ml

Distillation IBP D86-IP 123; EN ISO 3405 140 to 180°C 100ml

Distillation 10% D86-IP 123; EN ISO 3405 159 to 188°C 100ml



Distillation FBP D86-IP 123; EN ISO 3405 241 to 269°C 100ml

Distillation Residue D86-IP 123; EN ISO 3405 1.1 to 1.3%vol 100ml

Distillation Loss D86-IP 123; EN ISO 3405 0.4 to 0.8%vol 100ml

Flash Point IP 170; EN ISO 13736 35 to 60°C 85ml

Freezing Point D2386-IP 16 -62 to -43°C 25ml

Aromatics FIA D1319-IP 156 16 to 22%vol 0.75ml

Smoke Point D1322-IP 57; ISO 1322 20 to 25mm 20ml

Kin Vis -20°C D445-IP 71; EN ISO 3104 2 to 8mm2/s 20ml

Acid Number D3242-IP 354 < 0.100mg KOH/g 100ml

Mercaptans D3227-IP 342; ISO 3012 0.0001 to 0.0100%(m/m) 40ml

99851-0 SETA MTVM - GAS OIL 500ML


Density at 15°C D4052-IP 356 0.83 to 0.854kg/l 2ml







Distillation Residue D86-IP 123; EN ISO 3405 1.25 to 1.42%vol 100ml

Distillation Loss D86-IP 123; EN ISO 3405 0.26 to 0.7%vol 100ml

FAME Content IP 579 0.03 to 19.03%(V/V)

Flash Point D93-IP 34; EN ISO 2719 56 to 80°C 75ml

Cloud Point D2500; D5771-IP 444; D5772-IP 445; D5773-IP 446; IP 219; ISO 3015; EN 23015

-17 to -4°C Up to 38ml

CFPP D6371; IP 309; EN 116 -30 to 0°C 45ml

Pour Point D97-IP 15; D5950; D5949; D6749; D6892; D5985; EN ISO 3016

-33 to -6°C Up to 38ml

Kin Vis 40°C D445-IP 71; EN ISO 3104 2.3 to 3.5mm2/s Up tp 40ml

Lubricity HFRR D6079; IP 450; ISO 12156-1 212 to 512µm 2ml

Water Karl Fischer D1744; IP 438; EN ISO 12937

23.4 to 63.9mg/kg 5ml

99852-0 SETA MTVM - FUEL OIL 500ML


Density at 15°C D4052-IP 356 0.94 to 0.994 kg/l 2ml

Pour Point D97-IP 15 -14 to 7°C Up to 38ml

Kin Vis 50°C D445-IP 71; EN ISO 3104 150 to 1800mm2/s Up to 40ml

Kin Vis 100°C D445-IP 71; EN ISO 3104 20 to 95mm2/s Up to 40ml

Micro Carbon D4530; IP 398; ISO 10370 0.10 to 30.0%(m/m) 2ml

Flash Point D93 (b) - IP 34 (b); EN ISO 2719 (b)

88.9 to 121.6°C 75ml

99854-0 SETA MTVM - MOTOR GASOLINE 500ML


Motor Octane No. D2700; ISO 5163 82 to 90 MON -

Research Octane No.

D2699; ISO 5164 90.5 to 101 RON -

Density at 15°C D4052-IP 356; ISO 12185 0.721 to 0.763kg/l 2ml


Distillation 70°C D86-IP 123; EN ISO 3405 15 to 44 %vol 100ml




Aromatics FIA D1319; IP 156 19 to 42 %vol 0.75ml

Olefins FIA D1319; IP 156 1.5 to 15 %vol 0.75ml

Saturates FIA D1319; IP 156 42 to 72 %vol 0.75ml

Vapour Pressure D5191; IP 394; EN 13016-1 50 to 95kPa 3ml

99856-0 SETA MTVM - BITUMEN 200ML

Test Name ASTM/Method Range Amount/test

Softening Point IP 58; EN ISO 1427 37 to 54°C 7.5ml

Needle Penetration IP 49; EN ISO 1426 35 to 200 Pen 130ml

99853-2 SETA MTVM - LUBRICATING OIL 500ML (GUIDE 34)


Flash Point D93 Procedure A 196 to 225°C 80ml

Pour Point D97 –IP 15 -49.1 to -33°C 50ml

Kinematic Viscosity 40°C D445 53 to 165mm2/s 30ml

Kinematic Viscosity 100°C D445 9 to 22mm2/s 30ml

Viscosity Index D2270 139 to 180 60ml

Density D4052 0.85 to 0.88g/mL 10ml

Zinc D5185 800 to 1275mg/kg 5ml

Calcium D5185 3000 to 5000mg/kg 5ml

Phosphorus D5185 800 to 1600mg/kg 5ml

Acid Number D664 1 to 5KOH/g 2ml

Base Number D2896 5 to 15KOH/g 3ml

SINGLE TEST VERIFICATION MATERIALS

• Verification to ASTM/CEN/ISO/IP

• Traceable to ISO 9001:2000

• 18 Month Validity

SETA STVM - KEROSENE 50ML

Seta Part No.

Test Name ASTM/Method Range

99857-0 Napthalenes D1840 1.33 to 2.4%vol

99858-0 Sulfur ED X-ray D4294-IP 336; EN ISO 8754

0.003 to 0.110%m/m

99898-0 Aromatics-Di HPLC D6379-IP 436 1.44 to 2.90%m/m

99898-0 Aromatics-Mono HPLC D6379-IP 436 15.2 to 21.2%m/m

99898-0 Aromatics-Total HPLC D6379-IP 436 16.9 to 22.8%m/m

SETA STVM - GAS OIL 50ML

Seta Part No.

Test Name ASTM/Method Range

99859-0 Sulfur ED X-ray D4294-IP 336; EN ISO 8754

0.001 to 0.016%m/m

99867-0 Sulfur WD X-ray D2622 0.0009 to 0.013%m/m

99869-0 Aromatics HPLC D6591-IP 391; EN 12916 0.6 to 3.6%m/m

99905-0 SETA SIMDIS STVM - KEROSENE (JET TURBINE FUEL)10ML

Test Name ASTM/Method Range Amount/Test

SIMDIS IBP D2887-IP 406 100 to 180°C 1ml

SIMDIS 10% D2887-IP 406 142 to 188°C 1ml

SIMDIS 50% D2887-IP 406 183 to 218°C 1ml

SIMDIS 90% D2887-IP 406 220 to 249°C 1ml

SIMDIS 95% D2887-IP 406 230 to 259°C 1ml

SIMDIS FBP D2887-IP 406 244 to 297°C 1ml

99906-0 SETA SIMDIS STVM - GAS OIL 10ML


SIMDIS IBP D2887-IP 406 120 to 190°C 1ml

SIMDIS 10% D2887-IP 406 177 to 242°C 1ml

SIMDIS 50% D2887-IP 406 260 to 290°C 1ml

SIMDIS 90% D2887-IP 406 320 to 355°C 1ml

SIMDIS 95% D2887-IP 406 335 to 375°C 1ml

SIMDIS FBP D2887-IP 406 350 to 414°C 1ml

99980-0 SETA STVM - GASOLINE 5 X 5ML


Motor Gasoline Aromatics D6839; ISO 22854; EN 14517

22.41 to 35.41 %vol

0.1µL

Motor Gasoline Olefins D6839; ISO 22854; EN 14517

0.31 to 14.50% vol

0.1µL

Motor Gasoline Saturates D6839; ISO 22854; EN 14517

43.62 to 77.2%vol 0.1µL

Motor Gasoline Oxygenates

D6839; ISO 22854; EN 14517

0.04 to 12.3%vol 0.1µL

Motor Gasoline Oxygen D6839; ISO 22854; EN 14517

0 to 2.58%vol 0.1µL

Motor Gasoline Benzene D6839; ISO 22854; EN 14517

0.051 to 0.888 %vol

0.1µL

99981-0 SETA STVM - GAS OIL 50ML


Gas Oil Sulphur D5453; IP 490; ISO 20846 3 to 10 mg/kg 1ml

| Issue 3| Issue 1Stanhope-Seta, London Street, Chertsey, Surrey, KT16 8AP, UK t: +44 (0) 1932 564391 | e: [email protected] | www.stanhope-seta.co.uk | Issue 2

Product Profile

Documents

Product Profile - Stanhope- · PDF fileProduct Profile Laboratory Instruments for quality control, analysis and . calibration. Stanhope-Seta, London Street, ... Density ASTM D1298;