Upload
others
View
13
Download
0
Embed Size (px)
Citation preview
REVISION DATE20171204
DOCUMENT NUMBER
U.S. Patent No. 8,856,780
TERMS OF USE Automotive Data Solutions Inc. (“ADS”) products are strictly intended for installation by Certified Technicians who are employed by a registered business specialized in the installation of automotive aftermarket electronics products. Prior to beginning installation of an ADS product in a vehicle, it is the Certified Technician’s responsibility to review the most current Product Guide, Install Guide and vehicle-specific notes available in Weblink®. ADS is not responsible for any damages whatsoever, including but not limited to any consequential damages, incidental damages, damages for loss of time, loss of earnings, loss of profit, commercial loss, loss of economic opportunity and the like that may or may not have resulted from the use, misuse, improper installation or operation of its products. ADS reserves itself the right to suspend any Weblink® account without notice and decline to offer technical support to non-Certified Technicians, non-compliant Certified Technicians or end users.
PRODUCT GUIDEFLRSBA
www.idatalink.comAutomotive Data Solutions Inc. © 2017
U.S. Patent No. 8,856,780
GETTING STARTED - 1 OF 2
TABLE OF CONTENTS
PRESTIGE
Box Contents 4
Compatible Accessories 5-6
Tach Programming Procedure 7
Remote Programming Procedure 8
Valet Mode Programming Procedure 9-13
Online Module Settings 14
Module Diagnostics 15
Remote Starter Error Codes 16
Module Reset Procedure 17
PURSUIT
Box Contents 18
Compatible Accessories 19-20
Tach Programming Procedure 21
Remote Programming Procedure 22
Valet Mode Programming Procedure 23-27
Online Module Settings 28
Module Diagnostics 29
Remote Starter Error Codes 30
Module Reset Procedure 31
WELCOMECongratulations on the purchase of your FLRSBA solution. You are now a few simple steps away from enjoying your new remote starter unit with enhanced features. Before starting your installation, please ensure that your FLRSBA module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 2 OF 52• 20171204
U.S. Patent No. 8,856,780
GETTING STARTED - 2 OF 2
TABLE OF CONTENTS
CODE ALARM
Box Contents 32
Compatible Accessories 33-34
Tach Programming Procedure 35
Remote Programming Procedure 36
Valet Mode Programming Procedure 37-38
Online Module Settings 39
Module Diagnostics 40
Remote Starter Error Codes 41
Module Reset Procedure 42
DIRECTED
Box Contents 43
Compatible Accessories 44-45
Tach Programming Procedure 46
Remote Programming Procedure 47
Valet Mode Programming Procedure 48
Online Module Settings 49
Module Diagnostics 50
Remote Starter Error Codes 51
Module Reset Procedure 52
NEED HELP?1 800 225-6074
www.voxxelectronics.com/care/?p=contactus
www.fl ashlogic.com/supportwww.facebook.com/audiovox
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 3 OF 52• 20171204
U.S. Patent No. 8,856,780 PRESTIGE
BOX CONTENTS
M9 - 4 PIN RED
M11 - 4 PIN BLUEPROGRAMMING BUTTON
M7 - 6 PIN BLACK
LED 1LED 2
M10 - 4 PIN BLACK
M12 - 4 PIN YELLOW
M13 - 4 PIN WHITE
M8 - 5 PIN BLACK
HOOD SWITCHSTICKERS
MODULE
79
3
10864
12
5
79
3
108
1112
64
12
5
79
3
108
111314
12
1517181920
16
64
12
5
453
21
6
M5
M4
01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK RELEASE (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK RELEASE (-) OUTPUT04 GREEN/WHITE•BLACK DOT - ARM (-) OUTPUT04 GREEN/WHITE•BLACK DOT - ARM (-) OUTPUT05 GREEN/BLACK•BLACK DOT - DISARM (-) OUTPUT05 GREEN/BLACK•BLACK DOT - DISARM (-) OUTPUT06 BLUE/WHITE•BLACK DOT - GWR (-) OUTPUT06 BLUE/WHITE•BLACK DOT - GWR (-) OUTPUT07 BROWN•BLACK DOT - SIREN (+) OUTPUT07 BROWN•BLACK DOT - SIREN (+) OUTPUT08 WHITE/PURPLE•BLACK DOT - POC 1 - 2ND UNLOCK OTHER DOORS (-) OUTPUT08 WHITE/PURPLE•BLACK DOT - POC 1 - 2ND UNLOCK OTHER DOORS (-) OUTPUT09 PURPLE/BLACK•BLACK DOT - POC 2 - RAP SHUTDOWN (-) OUTPUT09 PURPLE/BLACK•BLACK DOT - POC 2 - RAP SHUTDOWN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - POC 3 - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - POC 3 - HORN (-) OUTPUT11 BROWN/BLACK•BLACK DOT - POC 4 - STARTER KILL (-) OUTPUT11 BROWN/BLACK•BLACK DOT - POC 4 - STARTER KILL (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHTS (-) OUTPUT
01 BROWN•SILVER DOT - BRAKE (+) INPUT02 BLACK/WHITE•SILVER DOT - E-BRAKE (-) INPUT03 PURPLE•SILVER DOT - DOOR (+) INPUT04 GREEN•SILVER DOT - DOOR (-) INPUT05 PURPLE/WHITE•SILVER DOT - TACH (-) INPUT06 WHITE/BLUE•SILVER DOT - X-TRIGGER (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT08 BLUE•SILVER DOT - TRUNK (-) INPUT09 GRAY/BLACK•SILVER DOT - GLOW PLUG (+) INPUT10 TAN•SILVER DOT - EXT ALARM SENSOR (-) INPUT
FUNCTIONS DEFINED BY FIRMWARE
FUNCTIONS DEFINED BY FIRMWARE
M3
M2
453
21
6
M6
FUNCTIONS DEFINED BY FIRMWARE
M3 - 10 PIN WHITE
M2 - 12 PIN BLACK
M5 - 6 PIN BLUE
M4 - 20 PIN BLACK
M1 - 8 PIN BLACK
2X
BOX CONTENTS - 1 OF 1
M6 - 6 PIN BLACK
AUTOMATICTRANSMISSION
CUT LOOP
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 4 OF 52• 20171204
U.S. Patent No. 8,856,780 PRESTIGE
COMPATIBLE ACCESSORIES - 1 OF 2
4
2
8
1
3
5
7
6
M1
MODULEM1
01 ORANGE - ACCESSORY (+)01 ORANGE - ACCESSORY (+)02 RED - POWER (30A)02 RED - POWER (30A)03 PURPLE - STARTER (+)03 PURPLE - STARTER (+)04 PINK/WHITE - PROG. RELAY #4 - IGNITION 2 (+) (DEFAULT)04 PINK/WHITE - PROG. RELAY #4 - IGNITION 2 (+) (DEFAULT)05 PINK - IGNITION (+)05 PINK - IGNITION (+)
07 RED - POWER (30A)07 RED - POWER (30A)08 BLACK - GROUND08 BLACK - GROUND
06 WHITE - PROG. RELAY #5 (10A) - PARKING LIGHTS (+) (DEFAULT)06 WHITE - PROG. RELAY #5 (10A) - PARKING LIGHTS (+) (DEFAULT)
FLASHLOGIC: ADSAHRPWR HIGH CURRENT HARNESS SOLD SEPARATELY
FLASHLOGIC: FLPROG WEBLINK CABLE SOLD SEPARATELY
COMPUTERUSB PORT
4 PIN BLACK CABLE
MODULE M10
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
MOBILE DEVICE PORT
OBDII CONNECTOR
4 PIN BLACK CABLE
MODULE M10
OBDII CONNECTOR
FLASHLOGIC: FLWLMAN1, FLWLMAP1 WEBLINK MOBILE SOLD SEPARATELY
TO ACTIVATE THE BUILT-IN TILT & SHOCK SENSOR, THE SHOCK SENSOR PORT FOR COMPATIBLE ACCESSORIES AND THE SIREN OUTPUT:1-LOG INTO YOUR WEBLINK ACCOUNT.2-CONNECT YOUR CONTROL MODULE AND FOLLOW THE PROGRAMMING STEPS.3-SELECT BASEC AND ENTER THE 16 DIGIT ACTIVATION CODE.4-PROCEED WITH THE PROGRAMMING STEPS AND INSTALLATION.
TO ACTIVATE THE BUILT-IN TILT & SHOCK SENSOR, THE SHOCK SENSOR PORT FOR COMPATIBLE ACCESSORIES AND THE SIREN OUTPUT:1-LOG INTO YOUR WEBLINK ACCOUNT.2-CONNECT YOUR CONTROL MODULE AND FOLLOW THE PROGRAMMING STEPS.3-SELECT BASEC AND ENTER THE 16 DIGIT ACTIVATION CODE.4-PROCEED WITH THE PROGRAMMING STEPS AND INSTALLATION.
: DIGITAL TILT SENSOR : GLASS BREAK SENSOR
: FIELD DISTURBANCE/MOVEMENT SENSOR : DUAL STAGE PIEZO SHOCK SENSOR
: DUAL STAGE INFRASONIC SHOCK SENSOR
DUB1: DIGITAL TILT SENSOR CAGBS: GLASS BREAK SENSOR MV3: FIELD DISTURBANCE/MOVEMENT SENSOR AS9492A: DUAL STAGE PIEZO SHOCK SENSOR AS94954P: DUAL STAGE INFRASONIC SHOCK SENSOR
FLASHLOGIC: BASEC / VOXX: DUB1, CAGBS, MV3, AS9492A, AS94954P SECURITY PACKAGE SOLD SEPARATELY
07 BROWN•BLACK DOT - SIREN (+) OUTPUT
REDBLACK
BASEC SIREN
MODULEM2
MODULEM13 OPTIONAL SENSORS
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 5 OF 52• 20171204
U.S. Patent No. 8,856,780 PRESTIGE
COMPATIBLE ACCESSORIES - 2 OF 2
ANTENNA
MODULEM7
PRESTIGE: PE1B, PE1BTW, PE2LED, PE2LCD, PE5B RF KIT SOLD SEPARATELY
(NC)
MODULEM11
CARLINK: ASCL6, ASCLBTLR TELEMATIC KIT SOLD SEPARATELY
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 6 OF 52• 20171204
U.S. Patent No. 8,856,780 PRESTIGE
01
ENGINESTARTSTOP
OFF ACC ON STARTSTARTSTART
02
03
04
05
06
TACH PROGRAMMING PROCEDURE - 1 OF 1
START vehicle for 15 seconds.
Press and hold the brake pedal.
Press and release the module’s programming button. (OR if the remotes are already programmed to the vehicle, press and hold the start button of the remote for 2.5 seconds.)
Wait, LED 2 will fl ash GREEN. (See the Module Diagnostics page)
Release the brake pedal.
Module Programming Procedure completed.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 7 OF 52• 20171204
U.S. Patent No. 8,856,780 PRESTIGE
>>
>>
01
ENGINESTARTSTOP
OFF ACC ON STARTON
02
03
04
05
06
07
08
ENGINESTARTSTOP
OFF ACC ON STARTOFF
09
10
11
>>
TYPE 1 - REMOTE PROGRAMMING - 1 OF 1
The following procedure is valid for PRESTIGE and PURSUIT RF kits. It programs aftermarket remotes to the remote starter.
WARNING: Program aftermarket remotes before usage. A maximum of four [4x] aftermarket remotes per system.
Set ignition to ON position.
Press and release the antenna button three times [3x].
The parking lights will fl ash once [1x], the horn will chirp once [1x].
The remote starter LED will turn RED and the antenna LED will fl ash.
Press once [1x] on LOCK button of aftermarket remote.
The remote starter LED will fl ash GREEN once [1x] then will turn RED.
To program additional remotes: repeat steps 5 to 6 using each additional remote.
Set ignition to OFF position.
The remote starter LED will turn OFF and the antenna LED will turn OFF.
The parking lights will fl ash twice [2x], the horn will chirp twice [2x].
Remote Programming completed.
TO DELETE ALL REMOTES: repeat steps 1 to 4 then press and hold the antenna button for 6 seconds. The parking lights will fl ash twice [2x], the horn will chirp twice [2x].
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 8 OF 52• 20171204
U.S. Patent No. 8,856,780 PRESTIGE
>>
01
02
ENGINESTARTSTOP
OFF ACC ON STARTOFF
03
04
ENGINESTARTSTOP
OFF ACC ON STARTON
05
06
07
TYPE 1 - VALET MODE - 1 OF 1
The following procedure is valid for PRESTIGE and PURSUIT RF kits. It triggers the Valet Mode for remote start only.
NOTE: In Valet Mode, the Remote starter is not functional. Keyless entry, Lock and Unlock will remain functional.
Set ignition to OFF position.
Press and hold the antenna button.
Cycle ignition ON three times [3x ON/OFF] rapidly.
The parking lights will fl ash once [1x], the horn will chirp once [1x], the antenna LED will fl ash twice [2x] rapidly then once [1x].
Valet Mode completed.
To exit valet mode, repeat steps 2 to 4. The parking lights will fl ash twice [2x], the horn will chirp twice [2x], the antenna LED will turn OFF.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 9 OF 52• 20171204
U.S. Patent No. 8,856,780 PRESTIGE
>>
01
02
ENGINESTARTSTOP
OFF ACC ON STARTON
03
04
05
ENGINESTARTSTOP
OFF ACC ON STARTOFF
06
07
TYPE 2 - VALET MODE - 1 OF 1
The following procedure is valid for PRESTIGE and PURSUIT RF kits. It triggers the Valet Mode for alarm only.
NOTE: In Valet Mode, the alarm is disabled and the Remote starter is functional. Keyless entry, Lock and Unlock will remain functional.
Set ignition to ON position.
Press and hold the antenna button for 5 seconds.
The parking lights will fl ash once [1x], the horn will chirp once [1x], the antenna LED will turn ON.
Set ignition to OFF position.
Valet Mode completed.
To exit valet mode, repeat steps 2 to 3. The parking lights will fl ash twice [2x], the horn will chirp twice [2x], the antenna LED will turn OFF.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 10 OF 52• 20171204
U.S. Patent No. 8,856,780 PRESTIGE
>>
01
02
ENGINESTARTSTOP
OFF ACC ON STARTON
03
04
05
ENGINESTARTSTOP
OFF ACC ON STARTOFF
06
07
TYPE 3 - VALET MODE - 1 OF 1
The following procedure is valid for PRESTIGE and PURSUIT RF kits. It triggers the Valet Mode for remote start and alarm if the alarm override option is set to valet switch (Menu 3, Option 22).
NOTE: In Valet Mode, the Remote starter is not functional. Keyless entry, Lock and Unlock will remain functional.
Cycle ignition ON twice [2x OFF/ON] rapidly.
Press and release the BRAKE pedal three times [3x].
The parking lights will fl ash once [1x], the horn will chirp once [1x], the antenna LED will turn ON.
Set ignition to OFF position.
Valet Mode completed.
To exit valet mode, repeat steps 2 to 3. The parking lights will fl ash twice [2x], the horn will chirp twice [2x], the antenna LED will turn OFF.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 11 OF 52• 20171204
U.S. Patent No. 8,856,780 PRESTIGE
>>
01
02
ENGINESTARTSTOP
OFF ACC ON STARTON
03
04
ENGINESTARTSTOP
OFF ACC ON STARTON
05
06
ENGINESTARTSTOP
OFF ACC ON STARTON
07
ENGINESTARTSTOP
OFF ACC ON STARTSTARTSTART
08
ENGINESTARTSTOP
OFF ACC ON STARTOFF
09
TYPE 4 - VALET MODE - 1 OF 1
The following procedure is valid for PRESTIGE and PURSUIT RF kits. It triggers the Valet Mode with a custom code override. The default override code is 11.
NOTE: In Valet Mode, the Remote starter is not functional. Keyless entry, Lock and Unlock will remain functional.
Set ignition to ON position.
Press the antenna programming button once [1x].
Cycle ignition ON once [1x OFF/ON] rapidly.
Press the antenna programming button once [1x].
Cycle ignition ON once [1x ON/OFF] rapidly.
Set ignition to START position. (Engine running.)
Set ignition to OFF position.
Valet Mode completed.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 12 OF 52• 20171204
U.S. Patent No. 8,856,780 PRESTIGE
>>
01
02
ENGINESTARTSTOP
OFF ACC ON STARTON
03
04
05
ENGINESTARTSTOP
OFF ACC ON STARTON
06
07
ENGINESTARTSTOP
OFF ACC ON STARTON
08
09
ENGINESTARTSTOP
OFF ACC ON STARTOFF
10
11
TYPE 5 - VALET MODE - 1 OF 1
The following procedure is valid for PRESTIGE and PURSUIT RF kits. It sets a new custom code override to trigger the Valet Mode.
Press once [1x] on the unlock button of the aftermarket remote.
Set ignition to ON position.
TIME RESTRICTION. Complete steps 4 to 9 within 45 seconds.
Press the antenna programming button three times [3x].
Cycle ignition ON three times [3x OFF/ON] rapidly.
Press the antenna programming button up to 9 times, to set the tenths digit from 1 to 9. Each button press increments the digit by one.
Cycle ignition ON once [1x OFF/ON] rapidly.
Press the antenna programming button up to 9 times, to set the tenths digit from 1 to 9. Each button press increments the digit by one.
Set ignition to OFF position.
LED will fl ash as many times as the tenths digit, then will fl ash as many times as the units digit.
Valet Mode completed.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 13 OF 52• 20171204
U.S. Patent No. 8,856,780 PRESTIGE
ONLINE MODULE SETTINGS - 1 OF 1
WEB PROGRAMMABLE MENUS DESCRIPTIONMENU 1 – Remote Starter RS related confi guration optionsMENU 2 – Doorlock Options Convenience feature confi guration optionsMENU 3 – Security Options Alarm activation and settingsMENU 4 – AUX function assignments Set transmitter AUX buttons controlsMENU 5 – Programmable outputs (POC) Set actions for programmable outputsMENU 6 – Pulse Timer Output Confi guration (PTO) Set duration for pulse timer outputs (if used)MENU 7 – Input Confi gurations Set inputs for Auto by fi rmware/Data/AnalogMENU 8 – Output Confi gurations Set outputs for Auto by fi rmware/Data/Analog
Programming options are avaible through Weblink and Weblink Mobile only.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 14 OF 52• 20171204
U.S. Patent No. 8,856,780 PRESTIGE
MODULE DIAGNOSTICS - 1 OF 1
TEST MODULE
LED
1 S
TATU
S
DIA
GNO
STIC
I DURING MODULE PROGRAMMING
Flashing RED Missing/wrong information from fi rmware or vehicle.Solid RED Module waiting for more vehicle information.Flashing GREEN Additional steps required to complete module programming.Solid GREEN then OFF Module correctly programmed.OFF No activity or module already programmed.
II DURING TACH PROGRAMMING
1 GREEN fl ash Tach signal programmed in Analog2 GREEN fl ashes Tach signal programmed in Data3 RED fl ashes No tach signal detected4 RED fl ashes System is in valet mode5 RED fl ashes Tach set for ‘VTS’. No tach programming required6 RED fl ashes Tach set for ‘assumed start’. No tach programming required
III DURING REMOTE START
Flashing RED Module incorrectly programmed.Solid RED Module incorrectly programmed.Flashing GREEN Module correctly programmed and operational.Solid GREEN then OFF Reset in progress.OFF Invalid ground when running status from remote starter.
IV WITH IGNITION OFF
Flashing RED Module incorrectly programmed or connected.Solid RED Module not programmed. Waiting for more vehicle information.Flashing GREEN False ground when running status from remote starter.Solid GREEN then OFF Reset in progress.OFF Module at rest and ready for a remote start sequence.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 15 OF 52• 20171204
U.S. Patent No. 8,856,780 PRESTIGE
REMOTE STARTER ERROR CODES - 1 OF 1
REMOTE STARTER ERROR CODES:NOTES
[X] N
UM
BER
OF
PAR
KIN
G LI
GHT
FLAS
HES
DIA
GNO
STIC
I WARNING: The following applies only when the parking lights are connected and supported by the system.
01 Engine running. 02 Key in ignition at ON position.
II After a remote starter failure, the parking lights will fl ash three [3x] times, then will fl ash [X] number times to indicate an error code. See table.
03 Door is open.04 Trunk is open.05 Foot brake is ON. 06 Hood is open.07 The reservation is OFF. (Manual transmission only)08 Tach failure.09 The vehicle is moving (VSS).10 System is in Valet Mode. 11 CAN communication failure12 RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence.13 Bypass problem.
REMOTE STARTER SHUTDOWN ERROR CODES:NOTES
[Y] N
UM
BER
OF
PAR
KIN
G LI
GHT
FLAS
HES
DIA
GNO
STIC
I WARNING: The following applies only when the parking lights are connected and supported by the system.
01 Engine tach signal is lost.02 Emergency brake is lost.
II If the engine shuts down after a remote starter sequence: Press and hold the Trunk button and the Start button at the same time for 2.5 seconds when using a 1-WAY remote. OR Press once [1x] on button “4” when using a 2-WAY remote.
The parking lights will fl ash four [4x] times, then will fl ash [Y] number times to indicate an error code. See table.
03 Foot brake is ON. 04 Hood is open.05 Engine RPM limiter is ON.06 Glow plug timeout error.07 Vehicle is moving (VSS).08 N/A09 N/A10 Door is open.11 CAN communication failure during RS sequence.12 RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence.13 Takeover is not allowed.14 Shutdown error, board overheat protection.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 16 OF 52• 20171204
U.S. Patent No. 8,856,780 PRESTIGE
>>
01
02
03
04
05
06
07
08
>>
MODULE RESET PROCEDURE - 1 OF 1
The following procedure resets the module programming to the vehicle. It does not reset any settings confi gured online.
Disconnect all connectors from module except the M1 BLACK 8-pin connector and the M4 BLACK 20-pin connector.
Disconnect the M1 BLACK 8-pin connector and the M4 BLACK 20-pin connector.
PRESS AND HOLD the module’s programming button while connecting the M1 BLACK 8-pin connector and the M4 BLACK 20-pin connector.
Wait, LED 1 will flash RED. RELEASE programming button.
LED 1 will turn RED for 2 seconds.
Module RESET completed.
Reconnect all connectors.
Repeat programming procedure.
Failure to follow procedure may result with a DTC or a CHECK ENGINE error message.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 17 OF 52• 20171204
U.S. Patent No. 8,856,780 PURSUIT
BOX CONTENTS
M9 - 4 PIN RED
M11 - 4 PIN BLUEPROGRAMMING BUTTON
M7 - 6 PIN BLACK
LED 1LED 2
M10 - 4 PIN BLACK
M12 - 4 PIN YELLOW
M13 - 4 PIN WHITE
M8 - 5 PIN BLACK
HOOD SWITCHSTICKERS
MODULE
79
3
10864
12
5
79
3
108
1112
64
12
5
79
3
108
111314
12
1517181920
16
64
12
5
453
21
6
M5
M4
01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK RELEASE (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK RELEASE (-) OUTPUT04 GREEN/WHITE•BLACK DOT - ARM (-) OUTPUT04 GREEN/WHITE•BLACK DOT - ARM (-) OUTPUT05 GREEN/BLACK•BLACK DOT - DISARM (-) OUTPUT05 GREEN/BLACK•BLACK DOT - DISARM (-) OUTPUT06 BLUE/WHITE•BLACK DOT - GWR (-) OUTPUT06 BLUE/WHITE•BLACK DOT - GWR (-) OUTPUT07 BROWN•BLACK DOT - SIREN (+) OUTPUT07 BROWN•BLACK DOT - SIREN (+) OUTPUT08 WHITE/PURPLE•BLACK DOT - POC 1 - 2ND UNLOCK OTHER DOORS (-) OUTPUT08 WHITE/PURPLE•BLACK DOT - POC 1 - 2ND UNLOCK OTHER DOORS (-) OUTPUT09 PURPLE/BLACK•BLACK DOT - POC 2 - RAP SHUTDOWN (-) OUTPUT09 PURPLE/BLACK•BLACK DOT - POC 2 - RAP SHUTDOWN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - POC 3 - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - POC 3 - HORN (-) OUTPUT11 BROWN/BLACK•BLACK DOT - POC 4 - STARTER KILL (-) OUTPUT11 BROWN/BLACK•BLACK DOT - POC 4 - STARTER KILL (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHTS (-) OUTPUT
01 BROWN•SILVER DOT - BRAKE (+) INPUT02 BLACK/WHITE•SILVER DOT - E-BRAKE (-) INPUT03 PURPLE•SILVER DOT - DOOR (+) INPUT04 GREEN•SILVER DOT - DOOR (-) INPUT05 PURPLE/WHITE•SILVER DOT - TACH (-) INPUT06 WHITE/BLUE•SILVER DOT - X-TRIGGER (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT08 BLUE•SILVER DOT - TRUNK (-) INPUT09 GRAY/BLACK•SILVER DOT - GLOW PLUG (+) INPUT10 TAN•SILVER DOT - EXT ALARM SENSOR (-) INPUT
FUNCTIONS DEFINED BY FIRMWARE
FUNCTIONS DEFINED BY FIRMWARE
M3
M2
453
21
6
M6
FUNCTIONS DEFINED BY FIRMWARE
M3 - 10 PIN WHITE
M2 - 12 PIN BLACK
M5 - 6 PIN BLUE
M4 - 20 PIN BLACK
M1 - 8 PIN BLACK
2X
BOX CONTENTS - 1 OF 1
M6 - 6 PIN BLACK
AUTOMATICTRANSMISSION
CUT LOOP
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 18 OF 52• 20171204
U.S. Patent No. 8,856,780 PURSUIT
COMPATIBLE ACCESSORIES - 1 OF 2
4
2
8
1
3
5
7
6
M1
MODULEM1
01 ORANGE - ACCESSORY (+)01 ORANGE - ACCESSORY (+)02 RED - POWER (30A)02 RED - POWER (30A)03 PURPLE - STARTER (+)03 PURPLE - STARTER (+)04 PINK/WHITE - PROG. RELAY #4 - IGNITION 2 (+) (DEFAULT)04 PINK/WHITE - PROG. RELAY #4 - IGNITION 2 (+) (DEFAULT)05 PINK - IGNITION (+)05 PINK - IGNITION (+)
07 RED - POWER (30A)07 RED - POWER (30A)08 BLACK - GROUND08 BLACK - GROUND
06 WHITE - PROG. RELAY #5 (10A) - PARKING LIGHTS (+) (DEFAULT)06 WHITE - PROG. RELAY #5 (10A) - PARKING LIGHTS (+) (DEFAULT)
FLASHLOGIC: ADSAHRPWR HIGH CURRENT HARNESS SOLD SEPARATELY
FLASHLOGIC: FLPROG WEBLINK CABLE SOLD SEPARATELY
COMPUTERUSB PORT
4 PIN BLACK CABLE
MODULE M10
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
MOBILE DEVICE PORT
OBDII CONNECTOR
4 PIN BLACK CABLE
MODULE M10
OBDII CONNECTOR
FLASHLOGIC: FLWLMAN1, FLWLMAP1 WEBLINK MOBILE SOLD SEPARATELY
TO ACTIVATE THE BUILT-IN TILT & SHOCK SENSOR, THE SHOCK SENSOR PORT FOR COMPATIBLE ACCESSORIES AND THE SIREN OUTPUT:1-LOG INTO YOUR WEBLINK ACCOUNT.2-CONNECT YOUR CONTROL MODULE AND FOLLOW THE PROGRAMMING STEPS.3-SELECT BASEC AND ENTER THE 16 DIGIT ACTIVATION CODE.4-PROCEED WITH THE PROGRAMMING STEPS AND INSTALLATION.
TO ACTIVATE THE BUILT-IN TILT & SHOCK SENSOR, THE SHOCK SENSOR PORT FOR COMPATIBLE ACCESSORIES AND THE SIREN OUTPUT:1-LOG INTO YOUR WEBLINK ACCOUNT.2-CONNECT YOUR CONTROL MODULE AND FOLLOW THE PROGRAMMING STEPS.3-SELECT BASEC AND ENTER THE 16 DIGIT ACTIVATION CODE.4-PROCEED WITH THE PROGRAMMING STEPS AND INSTALLATION.
: DIGITAL TILT SENSOR : GLASS BREAK SENSOR
: FIELD DISTURBANCE/MOVEMENT SENSOR : DUAL STAGE PIEZO SHOCK SENSOR
: DUAL STAGE INFRASONIC SHOCK SENSOR
DUB1: DIGITAL TILT SENSOR CAGBS: GLASS BREAK SENSOR MV3: FIELD DISTURBANCE/MOVEMENT SENSOR AS9492A: DUAL STAGE PIEZO SHOCK SENSOR AS94954P: DUAL STAGE INFRASONIC SHOCK SENSOR
FLASHLOGIC: BASEC / VOXX: DUB1, CAGBS, MV3, AS9492A, AS94954P SECURITY PACKAGE SOLD SEPARATELY
07 BROWN•BLACK DOT - SIREN (+) OUTPUT
REDBLACK
BASEC SIREN
MODULEM2
MODULEM13 OPTIONAL SENSORS
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 19 OF 52• 20171204
U.S. Patent No. 8,856,780 PURSUIT
COMPATIBLE ACCESSORIES - 2 OF 2
(NC)
MODULEM11
CARLINK: ASCL6, ASCLBTLR TELEMATIC KIT SOLD SEPARATELY
ANTENNA
MODULEM7
PURSUIT: PRE1BTW RF KIT SOLD SEPARATELY
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 20 OF 52• 20171204
U.S. Patent No. 8,856,780 PURSUIT
01
ENGINESTARTSTOP
OFF ACC ON STARTSTARTSTART
02
03
04
05
06
TACH PROGRAMMING PROCEDURE - 1 OF 1
START vehicle for 15 seconds.
Press and hold the brake pedal.
Press and release the module’s programming button. (OR if the remotes are already programmed to the vehicle, press and hold the start button of the remote for 2.5 seconds.)
Wait, LED 2 will fl ash GREEN. (See the Module Diagnostics page)
Release the brake pedal.
Module Programming Procedure completed.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 21 OF 52• 20171204
U.S. Patent No. 8,856,780 PURSUIT
>>
>>
01
ENGINESTARTSTOP
OFF ACC ON STARTON
02
03
04
05
06
07
08
ENGINESTARTSTOP
OFF ACC ON STARTOFF
09
10
11
>>
TYPE 1 - REMOTE PROGRAMMING - 1 OF 1
The following procedure is valid for PRESTIGE and PURSUIT RF kits. It programs aftermarket remotes to the remote starter.
WARNING: Program aftermarket remotes before usage. A maximum of four [4x] aftermarket remotes per system.
Set ignition to ON position.
Press and release the antenna button three times [3x].
The parking lights will fl ash once [1x], the horn will chirp once [1x].
The remote starter LED will turn RED and the antenna LED will fl ash.
Press once [1x] on LOCK button of aftermarket remote.
The remote starter LED will fl ash GREEN once [1x] then will turn RED.
To program additional remotes: repeat steps 5 to 6 using each additional remote.
Set ignition to OFF position.
The remote starter LED will turn OFF and the antenna LED will turn OFF.
The parking lights will fl ash twice [2x], the horn will chirp twice [2x].
Remote Programming completed.
TO DELETE ALL REMOTES: repeat steps 1 to 4 then press and hold the antenna button for 6 seconds. The parking lights will fl ash twice [2x], the horn will chirp twice [2x].
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 22 OF 52• 20171204
U.S. Patent No. 8,856,780 PURSUIT
>>
01
02
ENGINESTARTSTOP
OFF ACC ON STARTOFF
03
04
ENGINESTARTSTOP
OFF ACC ON STARTON
05
06
07
TYPE 1 - VALET MODE - 1 OF 1
The following procedure is valid for PRESTIGE and PURSUIT RF kits. It triggers the Valet Mode for remote start only.
NOTE: In Valet Mode, the Remote starter is not functional. Keyless entry, Lock and Unlock will remain functional.
Set ignition to OFF position.
Press and hold the antenna button.
Cycle ignition ON three times [3x ON/OFF] rapidly.
The parking lights will fl ash once [1x], the horn will chirp once [1x], the antenna LED will fl ash twice [2x] rapidly then once [1x].
Valet Mode completed.
To exit valet mode, repeat steps 2 to 4. The parking lights will fl ash twice [2x], the horn will chirp twice [2x], the antenna LED will turn OFF.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 23 OF 52• 20171204
U.S. Patent No. 8,856,780 PURSUIT
>>
01
02
ENGINESTARTSTOP
OFF ACC ON STARTON
03
04
05
ENGINESTARTSTOP
OFF ACC ON STARTOFF
06
07
TYPE 2 - VALET MODE - 1 OF 1
The following procedure is valid for PRESTIGE and PURSUIT RF kits. It triggers the Valet Mode for alarm only.
NOTE: In Valet Mode, the alarm is disabled and the Remote starter is functional. Keyless entry, Lock and Unlock will remain functional.
Set ignition to ON position.
Press and hold the antenna button for 5 seconds.
The parking lights will fl ash once [1x], the horn will chirp once [1x], the antenna LED will turn ON.
Set ignition to OFF position.
Valet Mode completed.
To exit valet mode, repeat steps 2 to 3. The parking lights will fl ash twice [2x], the horn will chirp twice [2x], the antenna LED will turn OFF.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 24 OF 52• 20171204
U.S. Patent No. 8,856,780 PURSUIT
>>
01
02
ENGINESTARTSTOP
OFF ACC ON STARTON
03
04
05
ENGINESTARTSTOP
OFF ACC ON STARTOFF
06
07
TYPE 3 - VALET MODE - 1 OF 1
The following procedure is valid for PRESTIGE and PURSUIT RF kits. It triggers the Valet Mode for remote start and alarm if the alarm override option is set to valet switch (Menu 3, Option 22).
NOTE: In Valet Mode, the Remote starter is not functional. Keyless entry, Lock and Unlock will remain functional.
Cycle ignition ON twice [2x OFF/ON] rapidly.
Press and release the BRAKE pedal three times [3x].
The parking lights will fl ash once [1x], the horn will chirp once [1x], the antenna LED will turn ON.
Set ignition to OFF position.
Valet Mode completed.
To exit valet mode, repeat steps 2 to 3. The parking lights will fl ash twice [2x], the horn will chirp twice [2x], the antenna LED will turn OFF.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 25 OF 52• 20171204
U.S. Patent No. 8,856,780 PURSUIT
>>
01
02
ENGINESTARTSTOP
OFF ACC ON STARTON
03
04
ENGINESTARTSTOP
OFF ACC ON STARTON
05
06
ENGINESTARTSTOP
OFF ACC ON STARTON
07
ENGINESTARTSTOP
OFF ACC ON STARTSTARTSTART
08
ENGINESTARTSTOP
OFF ACC ON STARTOFF
09
TYPE 4 - VALET MODE - 1 OF 1
The following procedure is valid for PRESTIGE and PURSUIT RF kits. It triggers the Valet Mode with a custom code override. The default override code is 11.
NOTE: In Valet Mode, the Remote starter is not functional. Keyless entry, Lock and Unlock will remain functional.
Set ignition to ON position.
Press the antenna programming button once [1x].
Cycle ignition ON once [1x OFF/ON] rapidly.
Press the antenna programming button once [1x].
Cycle ignition ON once [1x ON/OFF] rapidly.
Set ignition to START position. (Engine running.)
Set ignition to OFF position.
Valet Mode completed.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 26 OF 52• 20171204
U.S. Patent No. 8,856,780 PURSUIT
>>
01
02
ENGINESTARTSTOP
OFF ACC ON STARTON
03
04
05
ENGINESTARTSTOP
OFF ACC ON STARTON
06
07
ENGINESTARTSTOP
OFF ACC ON STARTON
08
09
ENGINESTARTSTOP
OFF ACC ON STARTOFF
10
11
TYPE 5 - VALET MODE - 1 OF 1
The following procedure is valid for PRESTIGE and PURSUIT RF kits. It sets a new custom code override to trigger the Valet Mode.
Press once [1x] on the unlock button of the aftermarket remote.
Set ignition to ON position.
TIME RESTRICTION. Complete steps 4 to 9 within 45 seconds.
Press the antenna programming button three times [3x].
Cycle ignition ON three times [3x OFF/ON] rapidly.
Press the antenna programming button up to 9 times, to set the tenths digit from 1 to 9. Each button press increments the digit by one.
Cycle ignition ON once [1x OFF/ON] rapidly.
Press the antenna programming button up to 9 times, to set the tenths digit from 1 to 9. Each button press increments the digit by one.
Set ignition to OFF position.
LED will fl ash as many times as the tenths digit, then will fl ash as many times as the units digit.
Valet Mode completed.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 27 OF 52• 20171204
U.S. Patent No. 8,856,780 PURSUIT
ONLINE MODULE SETTINGS - 1 OF 1
WEB PROGRAMMABLE MENUS DESCRIPTIONMENU 1 – Remote Starter RS related confi guration optionsMENU 2 – Doorlock Options Convenience feature confi guration optionsMENU 3 – Security Options Alarm activation and settingsMENU 4 – AUX function assignments Set transmitter AUX buttons controlsMENU 5 – Programmable outputs (POC) Set actions for programmable outputsMENU 6 – Pulse Timer Output Confi guration (PTO) Set duration for pulse timer outputs (if used)MENU 7 – Input Confi gurations Set inputs for Auto by fi rmware/Data/AnalogMENU 8 – Output Confi gurations Set outputs for Auto by fi rmware/Data/Analog
Programming options are avaible through Weblink and Weblink Mobile only.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 28 OF 52• 20171204
U.S. Patent No. 8,856,780 PURSUIT
MODULE DIAGNOSTICS - 1 OF 1
TEST MODULE
LED
1 S
TATU
S
DIA
GNO
STIC
I DURING MODULE PROGRAMMING
Flashing RED Missing/wrong information from fi rmware or vehicle.Solid RED Module waiting for more vehicle information.Flashing GREEN Additional steps required to complete module programming.Solid GREEN then OFF Module correctly programmed.OFF No activity or module already programmed.
II DURING TACH PROGRAMMING
1 GREEN fl ash Tach signal programmed in Analog2 GREEN fl ashes Tach signal programmed in Data3 RED fl ashes No tach signal detected4 RED fl ashes System is in valet mode5 RED fl ashes Tach set for ‘VTS’. No tach programming required6 RED fl ashes Tach set for ‘assumed start’. No tach programming required
III DURING REMOTE START
Flashing RED Module incorrectly programmed.Solid RED Module incorrectly programmed.Flashing GREEN Module correctly programmed and operational.Solid GREEN then OFF Reset in progress.OFF Invalid ground when running status from remote starter.
IV WITH IGNITION OFF
Flashing RED Module incorrectly programmed or connected.Solid RED Module not programmed. Waiting for more vehicle information.Flashing GREEN False ground when running status from remote starter.Solid GREEN then OFF Reset in progress.OFF Module at rest and ready for a remote start sequence.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 29 OF 52• 20171204
U.S. Patent No. 8,856,780 PURSUIT
REMOTE STARTER ERROR CODES - 1 OF 1
REMOTE STARTER ERROR CODES:NOTES
[X] N
UM
BER
OF
PAR
KIN
G LI
GHT
FLAS
HES
DIA
GNO
STIC
I WARNING: The following applies only when the parking lights are connected and supported by the system.
01 Engine running. 02 Key in ignition at ON position.
II After a remote starter failure, the parking lights will fl ash three [3x] times, then will fl ash [X] number times to indicate an error code. See table.
03 Door is open.04 Trunk is open.05 Foot brake is ON. 06 Hood is open.07 The reservation is OFF. (Manual transmission only)08 Tach failure.09 The vehicle is moving (VSS).10 System is in Valet Mode. 11 CAN communication failure12 RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence.13 Bypass problem.
REMOTE STARTER SHUTDOWN ERROR CODES:NOTES
[Y] N
UM
BER
OF
PAR
KIN
G LI
GHT
FLAS
HES
DIA
GNO
STIC
I WARNING: The following applies only when the parking lights are connected and supported by the system.
01 Engine tach signal is lost.02 Emergency brake is lost.
II If the engine shuts down after a remote starter sequence: Press and hold the Trunk button and the Start button at the same time for 2.5 seconds when using a 1-WAY remote. OR Press once [1x] on button “4” when using a 2-WAY remote.
The parking lights will fl ash four [4x] times, then will fl ash [Y] number times to indicate an error code. See table.
03 Foot brake is ON. 04 Hood is open.05 Engine RPM limiter is ON.06 Glow plug timeout error.07 Vehicle is moving (VSS).08 N/A09 N/A10 Door is open.11 CAN communication failure during RS sequence.12 RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence.13 Takeover is not allowed.14 Shutdown error, board overheat protection.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 30 OF 52• 20171204
U.S. Patent No. 8,856,780 PURSUIT
>>
01
02
03
04
05
06
07
08
>>
MODULE RESET PROCEDURE - 1 OF 1
The following procedure resets the module programming to the vehicle. It does not reset any settings confi gured online.
Disconnect all connectors from module except the M1 BLACK 8-pin connector and the M4 BLACK 20-pin connector.
Disconnect the M1 BLACK 8-pin connector and the M4 BLACK 20-pin connector.
PRESS AND HOLD the module’s programming button while connecting the M1 BLACK 8-pin connector and the M4 BLACK 20-pin connector.
Wait, LED 1 will flash RED. RELEASE programming button.
LED 1 will turn RED for 2 seconds.
Module RESET completed.
Reconnect all connectors.
Repeat programming procedure.
Failure to follow procedure may result with a DTC or a CHECK ENGINE error message.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 31 OF 52• 20171204
U.S. Patent No. 8,856,780 CODE ALARM
BOX CONTENTS
M9 - 4 PIN RED
M11 - 4 PIN BLUEPROGRAMMING BUTTON
M7 - 6 PIN BLACK
LED 1LED 2
M10 - 4 PIN BLACK
M12 - 4 PIN YELLOW
M13 - 4 PIN WHITE
M8 - 5 PIN BLACK
HOOD SWITCHSTICKERS
MODULE
79
3
10864
12
5
79
3
108
1112
64
12
5
79
3
108
111314
12
1517181920
16
64
12
5
453
21
6
M5
M4
01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK RELEASE (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK RELEASE (-) OUTPUT04 GREEN/WHITE•BLACK DOT - ARM (-) OUTPUT04 GREEN/WHITE•BLACK DOT - ARM (-) OUTPUT05 GREEN/BLACK•BLACK DOT - DISARM (-) OUTPUT05 GREEN/BLACK•BLACK DOT - DISARM (-) OUTPUT06 BLUE/WHITE•BLACK DOT - GWR (-) OUTPUT06 BLUE/WHITE•BLACK DOT - GWR (-) OUTPUT07 BROWN•BLACK DOT - SIREN (+) OUTPUT07 BROWN•BLACK DOT - SIREN (+) OUTPUT08 WHITE/PURPLE•BLACK DOT - POC 1 - 2ND UNLOCK OTHER DOORS (-) OUTPUT08 WHITE/PURPLE•BLACK DOT - POC 1 - 2ND UNLOCK OTHER DOORS (-) OUTPUT09 PURPLE/BLACK•BLACK DOT - POC 2 - RAP SHUTDOWN (-) OUTPUT09 PURPLE/BLACK•BLACK DOT - POC 2 - RAP SHUTDOWN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - POC 3 - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - POC 3 - HORN (-) OUTPUT11 BROWN/BLACK•BLACK DOT - POC 4 - STARTER KILL (-) OUTPUT11 BROWN/BLACK•BLACK DOT - POC 4 - STARTER KILL (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHTS (-) OUTPUT
01 BROWN•SILVER DOT - BRAKE (+) INPUT02 BLACK/WHITE•SILVER DOT - E-BRAKE (-) INPUT03 PURPLE•SILVER DOT - DOOR (+) INPUT04 GREEN•SILVER DOT - DOOR (-) INPUT05 PURPLE/WHITE•SILVER DOT - TACH (-) INPUT06 WHITE/BLUE•SILVER DOT - X-TRIGGER (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT08 BLUE•SILVER DOT - TRUNK (-) INPUT09 GRAY/BLACK•SILVER DOT - GLOW PLUG (+) INPUT10 TAN•SILVER DOT - EXT ALARM SENSOR (-) INPUT
FUNCTIONS DEFINED BY FIRMWARE
FUNCTIONS DEFINED BY FIRMWARE
M3
M2
453
21
6
M6
FUNCTIONS DEFINED BY FIRMWARE
M3 - 10 PIN WHITE
M2 - 12 PIN BLACK
M5 - 6 PIN BLUE
M4 - 20 PIN BLACK
M1 - 8 PIN BLACK
2X
BOX CONTENTS - 1 OF 1
M6 - 6 PIN BLACK
AUTOMATICTRANSMISSION
CUT LOOP
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 32 OF 52• 20171204
U.S. Patent No. 8,856,780 CODE ALARM
COMPATIBLE ACCESSORIES - 1 OF 2
4
2
8
1
3
5
7
6
M1
MODULEM1
01 ORANGE - ACCESSORY (+)01 ORANGE - ACCESSORY (+)02 RED - POWER (30A)02 RED - POWER (30A)03 PURPLE - STARTER (+)03 PURPLE - STARTER (+)04 PINK/WHITE - PROG. RELAY #4 - IGNITION 2 (+) (DEFAULT)04 PINK/WHITE - PROG. RELAY #4 - IGNITION 2 (+) (DEFAULT)05 PINK - IGNITION (+)05 PINK - IGNITION (+)
07 RED - POWER (30A)07 RED - POWER (30A)08 BLACK - GROUND08 BLACK - GROUND
06 WHITE - PROG. RELAY #5 (10A) - PARKING LIGHTS (+) (DEFAULT)06 WHITE - PROG. RELAY #5 (10A) - PARKING LIGHTS (+) (DEFAULT)
FLASHLOGIC: ADSAHRPWR HIGH CURRENT HARNESS SOLD SEPARATELY
FLASHLOGIC: FLPROG WEBLINK CABLE SOLD SEPARATELY
COMPUTERUSB PORT
4 PIN BLACK CABLE
MODULE M10
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
MOBILE DEVICE PORT
OBDII CONNECTOR
4 PIN BLACK CABLE
MODULE M10
OBDII CONNECTOR
FLASHLOGIC: FLWLMAN1, FLWLMAP1 WEBLINK MOBILE SOLD SEPARATELY
TO ACTIVATE THE BUILT-IN TILT & SHOCK SENSOR, THE SHOCK SENSOR PORT FOR COMPATIBLE ACCESSORIES AND THE SIREN OUTPUT:1-LOG INTO YOUR WEBLINK ACCOUNT.2-CONNECT YOUR CONTROL MODULE AND FOLLOW THE PROGRAMMING STEPS.3-SELECT BASEC AND ENTER THE 16 DIGIT ACTIVATION CODE.4-PROCEED WITH THE PROGRAMMING STEPS AND INSTALLATION.
TO ACTIVATE THE BUILT-IN TILT & SHOCK SENSOR, THE SHOCK SENSOR PORT FOR COMPATIBLE ACCESSORIES AND THE SIREN OUTPUT:1-LOG INTO YOUR WEBLINK ACCOUNT.2-CONNECT YOUR CONTROL MODULE AND FOLLOW THE PROGRAMMING STEPS.3-SELECT BASEC AND ENTER THE 16 DIGIT ACTIVATION CODE.4-PROCEED WITH THE PROGRAMMING STEPS AND INSTALLATION.
: DIGITAL TILT SENSOR : GLASS BREAK SENSOR
: FIELD DISTURBANCE/MOVEMENT SENSOR : DUAL STAGE PIEZO SHOCK SENSOR
: DUAL STAGE INFRASONIC SHOCK SENSOR
DUB1: DIGITAL TILT SENSOR CAGBS: GLASS BREAK SENSOR MV3: FIELD DISTURBANCE/MOVEMENT SENSOR AS9492A: DUAL STAGE PIEZO SHOCK SENSOR AS94954P: DUAL STAGE INFRASONIC SHOCK SENSOR
FLASHLOGIC: BASEC / VOXX: DUB1, CAGBS, MV3, AS9492A, AS94954P SECURITY PACKAGE SOLD SEPARATELY
07 BROWN•BLACK DOT - SIREN (+) OUTPUT
REDBLACK
BASEC SIREN
MODULEM2
MODULEM13 OPTIONAL SENSORS
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 33 OF 52• 20171204
U.S. Patent No. 8,856,780 CODE ALARM
COMPATIBLE ACCESSORIES - 2 OF 2
(NC)
MODULEM11
CARLINK: ASCL6, ASCLBTLR TELEMATIC KIT SOLD SEPARATELY
ANTENNA
MODULEM9
CODE ALARM: CA2LED, CA2LCD, CA4B RF KIT SOLD SEPARATELY
ANTENNA
MODULEM8
CODE ALARM: CA1B, BA1BTW RF KIT SOLD SEPARATELY
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 34 OF 52• 20171204
U.S. Patent No. 8,856,780 CODE ALARM
01
ENGINESTARTSTOP
OFF ACC ON STARTSTARTSTART
02
03
04
05
06
TACH PROGRAMMING PROCEDURE - 1 OF 1
START vehicle for 15 seconds.
Press and hold the brake pedal.
Press and release the module’s programming button. (OR if the remotes are already programmed to the vehicle, press and hold the start button of the remote for 2.5 seconds.)
Wait, LED 2 will fl ash GREEN. (See the Module Diagnostics page)
Release the brake pedal.
Module Programming Procedure completed.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 35 OF 52• 20171204
U.S. Patent No. 8,856,780 CODE ALARM
>>
>>
01
ENGINESTARTSTOP
OFF ACC ON STARTON
02
03
04
05
06
07
08
ENGINESTARTSTOP
OFF ACC ON STARTOFF
09
10
11
TYPE 2 - REMOTE PROGRAMMING - 1 OF 1
The following procedure is valid for CODE ALARM RF kits. It programs aftermarket remotes to the remote starter.
WARNING: Program aftermarket remotes before usage. A maximum of four [4x] aftermarket remotes per system.
Set ignition to ON position.
Press and hold the antenna button for 10 seconds.
The parking lights will fl ash three times [3x], the horn will chirp three times [3x].
The remote starter LED will turn RED and the antenna LED will fl ash.
Press once [1x] on LOCK button of aftermarket remote.
The remote starter LED will fl ash GREEN once [1x] then will turn RED.
To program additional remotes: repeat steps 5 to 6 using each additional remote.
Set ignition to OFF position.
The remote starter LED will turn OFF and the antenna LED will turn OFF.
The parking lights will fl ash three times [3x].
Remote Programming completed.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 36 OF 52• 20171204
U.S. Patent No. 8,856,780 CODE ALARM
>>
01
02
ENGINESTARTSTOP
OFF ACC ON STARTON
03
04
05
ENGINESTARTSTOP
OFF ACC ON STARTOFF
06
07
TYPE 6 - VALET MODE - 1 OF 1
The following procedure is valid for CODE ALARM RF kits. It triggers the Valet Mode.
NOTE: In Valet Mode, the Remote starter is not functional. Keyless entry, Lock and Unlock will remain functional.
Set ignition to ON position.
Press and hold the antenna button for 5 seconds.
The parking lights will fl ash once [1x], the horn will chirp once [1x], the antenna LED will turn ON.
Set ignition to OFF position.
Valet Mode completed.
To exit valet mode, repeat steps 2 to 3. The parking lights will fl ash twice [2x], the horn will chirp twice [2x], the antenna LED will turn OFF.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 37 OF 52• 20171204
U.S. Patent No. 8,856,780 CODE ALARM
>>
01
02
ENGINESTARTSTOP
OFF ACC ON STARTON
03
04
05
ENGINESTARTSTOP
OFF ACC ON STARTOFF
06
07
TYPE 7 - VALET MODE - 1 OF 1
The following procedure is valid for CODE ALARM RF kits. It triggers the Valet Mode with a 3X LOCK confi guration.
NOTE: In Valet Mode, the Remote starter is not functional. Keyless entry, Lock and Unlock will remain functional.
Cycle ignition ON twice [2x OFF/ON] rapidly.
Press and release the BRAKE pedal three times [3x].
The parking lights will fl ash once [1x], the horn will chirp once [1x], the antenna LED will turn ON.
Set ignition to OFF position.
Valet Mode completed.
To exit valet mode, repeat steps 2 to 3. The parking lights will fl ash twice [2x], the horn will chirp twice [2x], the antenna LED will turn OFF.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 38 OF 52• 20171204
U.S. Patent No. 8,856,780 CODE ALARM
ONLINE MODULE SETTINGS - 1 OF 1
WEB PROGRAMMABLE MENUS DESCRIPTIONMENU 1 – Remote Starter RS related confi guration optionsMENU 2 – Doorlock Options Convenience feature confi guration optionsMENU 3 – Security Options Alarm activation and settingsMENU 4 – AUX function assignments Set transmitter AUX buttons controlsMENU 5 – Programmable outputs (POC) Set actions for programmable outputsMENU 6 – Pulse Timer Output Confi guration (PTO) Set duration for pulse timer outputs (if used)MENU 7 – Input Confi gurations Set inputs for Auto by fi rmware/Data/AnalogMENU 8 – Output Confi gurations Set outputs for Auto by fi rmware/Data/Analog
Programming options are avaible through Weblink and Weblink Mobile only.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 39 OF 52• 20171204
U.S. Patent No. 8,856,780 CODE ALARM
MODULE DIAGNOSTICS - 1 OF 1
TEST MODULE
LED
1 S
TATU
S
DIA
GNO
STIC
I DURING MODULE PROGRAMMING
Flashing RED Missing/wrong information from fi rmware or vehicle.Solid RED Module waiting for more vehicle information.Flashing GREEN Additional steps required to complete module programming.Solid GREEN then OFF Module correctly programmed.OFF No activity or module already programmed.
II DURING TACH PROGRAMMING
1 GREEN fl ash Tach signal programmed in Analog2 GREEN fl ashes Tach signal programmed in Data3 RED fl ashes No tach signal detected4 RED fl ashes System is in valet mode5 RED fl ashes Tach set for ‘VTS’. No tach programming required6 RED fl ashes Tach set for ‘assumed start’. No tach programming required
III DURING REMOTE START
Flashing RED Module incorrectly programmed.Solid RED Module incorrectly programmed.Flashing GREEN Module correctly programmed and operational.Solid GREEN then OFF Reset in progress.OFF Invalid ground when running status from remote starter.
IV WITH IGNITION OFF
Flashing RED Module incorrectly programmed or connected.Solid RED Module not programmed. Waiting for more vehicle information.Flashing GREEN False ground when running status from remote starter.Solid GREEN then OFF Reset in progress.OFF Module at rest and ready for a remote start sequence.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 40 OF 52• 20171204
U.S. Patent No. 8,856,780 CODE ALARM
REMOTE STARTER ERROR CODES - 1 OF 1
REMOTE STARTER ERROR CODES:NOTES
[X] N
UM
BER
OF
PAR
KIN
G LI
GHT
FLAS
HES
DIA
GNO
STIC
I WARNING: The following applies only when the parking lights are connected and supported by the system.
01 Engine running. 02 Key in ignition at ON position.
II After a remote starter failure, the parking lights will fl ash three [3x] times, then will fl ash [X] number times to indicate an error code. See table.
03 Door is open.04 Trunk is open.05 Foot brake is ON. 06 Hood is open.07 The reservation is OFF. (Manual transmission only)08 Tach failure.09 The vehicle is moving (VSS).10 System is in Valet Mode. 11 CAN communication failure12 RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence.13 Bypass problem.
REMOTE STARTER SHUTDOWN ERROR CODES:NOTES
[Y] N
UM
BER
OF
PAR
KIN
G LI
GHT
FLAS
HES
DIA
GNO
STIC
I WARNING: The following applies only when the parking lights are connected and supported by the system.
01 Engine tach signal is lost.02 Emergency brake is lost.
II If the engine shuts down after a remote starter sequence: Press and hold the Trunk button and the Start button at the same time for 2.5 seconds when using a 1-WAY remote. OR Press once [1x] on button “4” when using a 2-WAY remote.
The parking lights will fl ash four [4x] times, then will fl ash [Y] number times to indicate an error code. See table.
03 Foot brake is ON. 04 Hood is open.05 Engine RPM limiter is ON.06 Glow plug timeout error.07 Vehicle is moving (VSS).08 N/A09 N/A10 Door is open.11 CAN communication failure during RS sequence.12 RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence.13 Takeover is not allowed.14 Shutdown error, board overheat protection.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 41 OF 52• 20171204
U.S. Patent No. 8,856,780 CODE ALARM
>>
01
02
03
04
05
06
07
08
>>
MODULE RESET PROCEDURE - 1 OF 1
The following procedure resets the module programming to the vehicle. It does not reset any settings confi gured online.
Disconnect all connectors from module except the M1 BLACK 8-pin connector and the M4 BLACK 20-pin connector.
Disconnect the M1 BLACK 8-pin connector and the M4 BLACK 20-pin connector.
PRESS AND HOLD the module’s programming button while connecting the M1 BLACK 8-pin connector and the M4 BLACK 20-pin connector.
Wait, LED 1 will flash RED. RELEASE programming button.
LED 1 will turn RED for 2 seconds.
Module RESET completed.
Reconnect all connectors.
Repeat programming procedure.
Failure to follow procedure may result with a DTC or a CHECK ENGINE error message.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 42 OF 52• 20171204
U.S. Patent No. 8,856,780 DIRECTED
BOX CONTENTS
M9 - 4 PIN RED
M11 - 4 PIN BLUEPROGRAMMING BUTTON
M7 - 6 PIN BLACK
LED 1LED 2
M10 - 4 PIN BLACK
M12 - 4 PIN YELLOW
M13 - 4 PIN WHITE
M8 - 5 PIN BLACK
HOOD SWITCHSTICKERS
MODULE
79
3
10864
12
5
79
3
108
1112
64
12
5
79
3
108
111314
12
1517181920
16
64
12
5
453
21
6
M5
M4
01 GREEN•BLACK DOT - LOCK (-) OUTPUT01 GREEN•BLACK DOT - LOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT02 BLUE•BLACK DOT - UNLOCK (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK RELEASE (-) OUTPUT03 RED/WHITE•BLACK DOT - TRUNK RELEASE (-) OUTPUT04 GREEN/WHITE•BLACK DOT - ARM (-) OUTPUT04 GREEN/WHITE•BLACK DOT - ARM (-) OUTPUT05 GREEN/BLACK•BLACK DOT - DISARM (-) OUTPUT05 GREEN/BLACK•BLACK DOT - DISARM (-) OUTPUT06 BLUE/WHITE•BLACK DOT - GWR (-) OUTPUT06 BLUE/WHITE•BLACK DOT - GWR (-) OUTPUT07 BROWN•BLACK DOT - SIREN (+) OUTPUT07 BROWN•BLACK DOT - SIREN (+) OUTPUT08 WHITE/PURPLE•BLACK DOT - POC 1 - 2ND UNLOCK OTHER DOORS (-) OUTPUT08 WHITE/PURPLE•BLACK DOT - POC 1 - 2ND UNLOCK OTHER DOORS (-) OUTPUT09 PURPLE/BLACK•BLACK DOT - POC 2 - RAP SHUTDOWN (-) OUTPUT09 PURPLE/BLACK•BLACK DOT - POC 2 - RAP SHUTDOWN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - POC 3 - HORN (-) OUTPUT10 WHITE/BLACK•BLACK DOT - POC 3 - HORN (-) OUTPUT11 BROWN/BLACK•BLACK DOT - POC 4 - STARTER KILL (-) OUTPUT11 BROWN/BLACK•BLACK DOT - POC 4 - STARTER KILL (-) OUTPUT12 WHITE•BLACK DOT - PARKING LIGHTS (-) OUTPUT
01 BROWN•SILVER DOT - BRAKE (+) INPUT02 BLACK/WHITE•SILVER DOT - E-BRAKE (-) INPUT03 PURPLE•SILVER DOT - DOOR (+) INPUT04 GREEN•SILVER DOT - DOOR (-) INPUT05 PURPLE/WHITE•SILVER DOT - TACH (-) INPUT06 WHITE/BLUE•SILVER DOT - X-TRIGGER (-) INPUT07 GRAY•SILVER DOT - HOOD (-) INPUT08 BLUE•SILVER DOT - TRUNK (-) INPUT09 GRAY/BLACK•SILVER DOT - GLOW PLUG (+) INPUT10 TAN•SILVER DOT - EXT ALARM SENSOR (-) INPUT
FUNCTIONS DEFINED BY FIRMWARE
FUNCTIONS DEFINED BY FIRMWARE
M3
M2
453
21
6
M6
FUNCTIONS DEFINED BY FIRMWARE
M3 - 10 PIN WHITE
M2 - 12 PIN BLACK
M5 - 6 PIN BLUE
M4 - 20 PIN BLACK
M1 - 8 PIN BLACK
2X
BOX CONTENTS - 1 OF 1
M6 - 6 PIN BLACK
AUTOMATICTRANSMISSION
CUT LOOP
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 43 OF 52• 20171204
U.S. Patent No. 8,856,780 DIRECTED
COMPATIBLE ACCESSORIES - 1 OF 2
4
2
8
1
3
5
7
6
M1
MODULEM1
01 ORANGE - ACCESSORY (+)01 ORANGE - ACCESSORY (+)02 RED - POWER (30A)02 RED - POWER (30A)03 PURPLE - STARTER (+)03 PURPLE - STARTER (+)04 PINK/WHITE - PROG. RELAY #4 - IGNITION 2 (+) (DEFAULT)04 PINK/WHITE - PROG. RELAY #4 - IGNITION 2 (+) (DEFAULT)05 PINK - IGNITION (+)05 PINK - IGNITION (+)
07 RED - POWER (30A)07 RED - POWER (30A)08 BLACK - GROUND08 BLACK - GROUND
06 WHITE - PROG. RELAY #5 (10A) - PARKING LIGHTS (+) (DEFAULT)06 WHITE - PROG. RELAY #5 (10A) - PARKING LIGHTS (+) (DEFAULT)
FLASHLOGIC: ADSAHRPWR HIGH CURRENT HARNESS SOLD SEPARATELY
FLASHLOGIC: FLPROG WEBLINK CABLE SOLD SEPARATELY
COMPUTERUSB PORT
4 PIN BLACK CABLE
MODULE M10
10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
9
MOBILE DEVICE PORT
OBDII CONNECTOR
4 PIN BLACK CABLE
MODULE M10
OBDII CONNECTOR
FLASHLOGIC: FLWLMAN1, FLWLMAP1 WEBLINK MOBILE SOLD SEPARATELY
TO ACTIVATE THE BUILT-IN TILT & SHOCK SENSOR, THE SHOCK SENSOR PORT FOR COMPATIBLE ACCESSORIES AND THE SIREN OUTPUT:1-LOG INTO YOUR WEBLINK ACCOUNT.2-CONNECT YOUR CONTROL MODULE AND FOLLOW THE PROGRAMMING STEPS.3-SELECT BASEC AND ENTER THE 16 DIGIT ACTIVATION CODE.4-PROCEED WITH THE PROGRAMMING STEPS AND INSTALLATION.
TO ACTIVATE THE BUILT-IN TILT & SHOCK SENSOR, THE SHOCK SENSOR PORT FOR COMPATIBLE ACCESSORIES AND THE SIREN OUTPUT:1-LOG INTO YOUR WEBLINK ACCOUNT.2-CONNECT YOUR CONTROL MODULE AND FOLLOW THE PROGRAMMING STEPS.3-SELECT BASEC AND ENTER THE 16 DIGIT ACTIVATION CODE.4-PROCEED WITH THE PROGRAMMING STEPS AND INSTALLATION.
: DIGITAL TILT SENSOR : GLASS BREAK SENSOR
: FIELD DISTURBANCE/MOVEMENT SENSOR : DUAL STAGE PIEZO SHOCK SENSOR
: DUAL STAGE INFRASONIC SHOCK SENSOR
DUB1: DIGITAL TILT SENSOR CAGBS: GLASS BREAK SENSOR MV3: FIELD DISTURBANCE/MOVEMENT SENSOR AS9492A: DUAL STAGE PIEZO SHOCK SENSOR AS94954P: DUAL STAGE INFRASONIC SHOCK SENSOR
FLASHLOGIC: BASEC / VOXX: DUB1, CAGBS, MV3, AS9492A, AS94954P SECURITY PACKAGE SOLD SEPARATELY
07 BROWN•BLACK DOT - SIREN (+) OUTPUT
REDBLACK
BASEC SIREN
MODULEM2
MODULEM13 OPTIONAL SENSORS
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 44 OF 52• 20171204
U.S. Patent No. 8,856,780 DIRECTED
COMPATIBLE ACCESSORIES - 2 OF 2
XL202 RF DECODER
ADSHRNRSXL02
XL202 ANTENNA
MODULEM10
DIRECTED: XL202 / FLASHLOGIC: ADSHRNRSXL02 RF KIT SOLD SEPARATELY
(NC)
(NC)
(NC)
MODULEM11
DIRECTED: SMARTSTART / FLASHLOGIC: ADSHRNSM01 TELEMATIC KIT SOLD SEPARATELY
ADSHRNSM01
SMARTSTART
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 45 OF 52• 20171204
U.S. Patent No. 8,856,780 DIRECTED
01
ENGINESTARTSTOP
OFF ACC ON STARTSTARTSTART
02
03
04
05
06
TACH PROGRAMMING PROCEDURE - 1 OF 1
START vehicle for 15 seconds.
Press and hold the brake pedal.
Press and release the module’s programming button. (OR if the remotes are already programmed to the vehicle, press and hold the start button of the remote for 2.5 seconds.)
Wait, LED 2 will fl ash GREEN. (See the Module Diagnostics page)
Release the brake pedal.
Module Programming Procedure completed.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 46 OF 52• 20171204
U.S. Patent No. 8,856,780 DIRECTED
AFTERMARKET REMOTE PROGRAMMING - 1 OF 1
AFTERMARKET REMOTE PROGRAMMING:NOTES
I All aftermarket remotes must be programmed to the RF-Kit.
Refer to the RF-Kit user guide for aftermarket remote features and programming procedures.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 47 OF 52• 20171204
U.S. Patent No. 8,856,780 DIRECTED
>>
01
02
03
ENGINESTARTSTOP
OFF ACC ON STARTON
04
05
06
ENGINESTARTSTOP
OFF ACC ON STARTOFF
07
08
TYPE 8 - VALET MODE - 1 OF 1
The following procedure is valid for DIRECTED RF kits. It triggers the Valet Mode.
NOTE: In Valet Mode, the Remote starter is not functional. Keyless entry, Lock and Unlock will remain functional.
Time restriction. Complete next step within 7 seconds.
Cycle ignition ON twice [2x OFF/ON] rapidly.
Press and release the BRAKE pedal three times [3x].
Parking Light will fl ash once [1x] then will fl ash twice [2x].
Set ignition to OFF position.
Valet Mode completed.
To exit valet mode: repeat steps 2 to 6.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 48 OF 52• 20171204
U.S. Patent No. 8,856,780 DIRECTED
ONLINE MODULE SETTINGS - 1 OF 1
WEB PROGRAMMABLE MENUS DESCRIPTIONMENU 1 – Remote Starter RS related confi guration optionsMENU 2 – Doorlock Options Convenience feature confi guration optionsMENU 3 – Security Options Alarm activation and settingsMENU 4 – AUX function assignments Set transmitter AUX buttons controlsMENU 5 – Programmable outputs (POC) Set actions for programmable outputsMENU 6 – Pulse Timer Output Confi guration (PTO) Set duration for pulse timer outputs (if used)MENU 7 – Input Confi gurations Set inputs for Auto by fi rmware/Data/AnalogMENU 8 – Output Confi gurations Set outputs for Auto by fi rmware/Data/Analog
Programming options are avaible through Weblink and Weblink Mobile only.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 49 OF 52• 20171204
U.S. Patent No. 8,856,780 DIRECTED
MODULE DIAGNOSTICS - 1 OF 1
TEST MODULE
LED
1 S
TATU
S
DIA
GNO
STIC
I DURING MODULE PROGRAMMING
Flashing RED Missing/wrong information from fi rmware or vehicle.Solid RED Module waiting for more vehicle information.Flashing GREEN Additional steps required to complete module programming.Solid GREEN then OFF Module correctly programmed.OFF No activity or module already programmed.
II DURING TACH PROGRAMMING
1 GREEN fl ash Tach signal programmed in Analog2 GREEN fl ashes Tach signal programmed in Data3 RED fl ashes No tach signal detected4 RED fl ashes System is in valet mode5 RED fl ashes Tach set for ‘VTS’. No tach programming required6 RED fl ashes Tach set for ‘assumed start’. No tach programming required
III DURING REMOTE START
Flashing RED Module incorrectly programmed.Solid RED Module incorrectly programmed.Flashing GREEN Module correctly programmed and operational.Solid GREEN then OFF Reset in progress.OFF Invalid ground when running status from remote starter.
IV WITH IGNITION OFF
Flashing RED Module incorrectly programmed or connected.Solid RED Module not programmed. Waiting for more vehicle information.Flashing GREEN False ground when running status from remote starter.Solid GREEN then OFF Reset in progress.OFF Module at rest and ready for a remote start sequence.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 50 OF 52• 20171204
U.S. Patent No. 8,856,780 DIRECTED
REMOTE STARTER ERROR CODES - 1 OF 1
REMOTE STARTER ERROR CODES:NOTES
[X] N
UM
BER
OF
PAR
KIN
G LI
GHT
FLAS
HES
DIA
GNO
STIC
I WARNING: The following applies only when the parking lights are connected and supported by the system.
01 Engine running. 02 Key in ignition at ON position.
II After a remote starter failure, the parking lights will fl ash three [3x] times, then will fl ash [X] number times to indicate an error code. See table.
03 Door is open.04 Trunk is open.05 Foot brake is ON. 06 Hood is open.07 The reservation is OFF. (Manual transmission only)08 Tach failure.09 The vehicle is moving (VSS).10 System is in Valet Mode. 11 CAN communication failure12 RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence.13 Bypass problem.
REMOTE STARTER SHUTDOWN ERROR CODES:NOTES
[Y] N
UM
BER
OF
PAR
KIN
G LI
GHT
FLAS
HES
DIA
GNO
STIC
I WARNING: The following applies only when the parking lights are connected and supported by the system.
01 Engine tach signal is lost.02 Emergency brake is lost.
II If the engine shuts down after a remote starter sequence: Press and hold the Trunk button and the Start button at the same time for 2.5 seconds when using a 1-WAY remote. OR Press once [1x] on button “4” when using a 2-WAY remote.
The parking lights will fl ash four [4x] times, then will fl ash [Y] number times to indicate an error code. See table.
03 Foot brake is ON. 04 Hood is open.05 Engine RPM limiter is ON.06 Glow plug timeout error.07 Vehicle is moving (VSS).08 N/A09 N/A10 Door is open.11 CAN communication failure during RS sequence.12 RS not synchronized. Start vehicle with OEM key for 15 sec before trying a new RS sequence.13 Takeover is not allowed.14 Shutdown error, board overheat protection.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 51 OF 52• 20171204
U.S. Patent No. 8,856,780 DIRECTED
>>
01
02
03
04
05
06
07
08
>>
MODULE RESET PROCEDURE - 1 OF 1
The following procedure resets the module programming to the vehicle. It does not reset any settings confi gured online.
Disconnect all connectors from module except the M1 BLACK 8-pin connector and the M4 BLACK 20-pin connector.
Disconnect the M1 BLACK 8-pin connector and the M4 BLACK 20-pin connector.
PRESS AND HOLD the module’s programming button while connecting the M1 BLACK 8-pin connector and the M4 BLACK 20-pin connector.
Wait, LED 1 will flash RED. RELEASE programming button.
LED 1 will turn RED for 2 seconds.
Module RESET completed.
Reconnect all connectors.
Repeat programming procedure.
Failure to follow procedure may result with a DTC or a CHECK ENGINE error message.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 FLRSBA
PAGE 52 OF 52• 20171204