Upload
truongthuan
View
230
Download
0
Embed Size (px)
Citation preview
Organized by
July 18 - 19, 2012 | Calgary | Alberta
www.horizontal-drilling-canada-2012.com
To register: (1) 800 721 3915 [email protected]
DRILLING MUDS: Identifying the cost criteria for different mud types to determine which can reduce dragand fluid loss whilst increasing drilling speed
BUILDING THE CURVE: Examining how to build to the lateral leg to effectively target pay zone and facilitate high recovery completions
DIRECTIONAL & DOWNHOLE TOOLS: Comparing the different applications of the latest directional and downhole tools to effectively assess the benefits, drawbacks and whether or not to invest in new technologies
WELL DESIGN: Scrutinizing the benefits of monobore vs. intermediate casing, multilaterals and multi-well pads to understand the potential to further increase productivity whilst reducing initial investment
COMPLETIONS ASSEMBLY: Assessing the production capabilities and drawbacks of cemented vs. packers and ball drop liners to cost effectively maximize production potential during stimulation
RIG DESIGN: Exploring current rig parameters and limitations to assess capabilities related to extended reach laterals and multi-well pads
Expert insight from 25+ speakersfrom the leading E&P companiesin the industry
CANADA’S FIRST SUMMIT FOCUSING ON PRODUCTION OPTIMIZATION THROUGH THE EYES OF THE DRILLER
Advancing Horizontal Drilling Techniques toReduce The Time & Costs ofDrilling In Western CanadianTight Oil Plays:Production Optimization ThroughThe Eyes Of The Driller
Thane JensenSVP OperationsPennWest Exploration
Garrett Ulmer VP Engineering Bellatrix Exploration
Has Malik Sr Drilling Engineer & Global Focal Point ConocoPhillips
Brad Wilson Drilling Manager Murphy Oil
Amanda Perry Drilling Fluid Optimization Engineer Shell Canada
Devin Allibone Lead Environmental Coordinator Canadian Natural Resources Ltd.
Dan Allan Chariman and President & CEO CSUR and Cumberland Oil & Gas
John Hunter Senior Drilling Engineer Apache Corporation
CO-SPONSORS:
DIRECTIONAL & SECURE DRILLING SERVICES:
The current economic climate is making it increasingly vital that drilling-related expenditure is reduced. Consistent innovations in drilling tools and technologies provide new hope in advancing drilling techniques, however, learning about their varying applications and limitations is integral to reduce unnecessary expenditure and ensure high completions recovery.
The mission of Horizontal Drilling, Tight Oil Plays, Western Canadian Sedimentary Basin is to explore current and new tools and technologies by uniting the key decision makers of the leading E&P companies to share knowledge and experiences, and pave the way for further innovation.
Day one will start by delving into innovations in drilling mud design to discover how to reduce torque, drag and fluid loss whilst effectively cleaning the wellbore. The vital issue of cost-effectively disposing of drill cuttings as per environmental regulations will also be explored. Day one willthen focus on assessing the balance between landing and staying in the target zone and maintaining wellbore integrity by scrutinizing and comparing the cost-benefit of directional tools including specific focus on rotary steerable tools, conventional tools, bottom-hole assemblies, drill bits, and MWD/LWD tools to analyze what factors ultimately affect decisions.
Day two will start with a look at underbalanced and managed pressure drilling methods to learn their current applications in different formations. The day will go on to assess current and new well designs to examine how the use of casing, multi-well pads and multilaterals might allow production to reach previously inconceivable levels. The capabilities of different completions assemblies will then be discussed to ascertain when packers or cementing might lead to the most productivity cementing best practices and how ball-drop liners can enhance the completion process. At the end of day two, rig designs will be scrutinized with a particular focus on new and emerging designs to discover the applications of rig specifications in ever-innovative well designs.
Sponsorship And Exhibition Opportunities At Horizontal Drilling, Tight Oil Plays, Western Canadian Sedimentary BasinNeed to generate new sales leads, launch a new product, engage key decision makers, build new future business relationships in key markets, or simply educate the industry about a new product? Then you need to exhibit at the Horizontal Drilling, Tight Oil Plays, Western Canadian Sedimentary Basin. Our busy exhibit area is an integral part of the Summit and is of genuine practical value to delegates, who are looking for new solutions and technologies. Exhibiting at the conference will help you position yourself as a market leader and centre of excellence to the key decision makers in the industry.
For further information, please email: [email protected]
or call: (1) 800 721 3915
Hyatt Regency Calgary
700 Centre Street SE,
Calgary, Alberta, Canada T2G 5P6
Phone: 1 403 717 1234
Fax: 1 403 537 4487
The Summit Will Be Held At:
July 18-19, 2012
Calgary Alberta
City Area Airports:
Calgary International Airport
For assistance or information with travel and accommodation please email:[email protected]
www.horizontal-drilling-canada-2012.com
Da
y O
ne
Wed
nesd
ay J
uly
18 2
012
Day 1: DRILLING MUDS, BUILDING THE CURVE & STAYING IN THE TARGET ZONE
8.50 Chair’s Opening Remarks
Kin Chow, President, Unconventional Gas ResourcesSTRATEGIC KEYNOTE CASE STUDY
9.00 How A Leading Canadian E&P Company Has Planned, Budgeted And Utilized Horizontal Drilling Techniques To Drive Down Well Costs In Western Canada
•Problem solving to reduce costs: hearing lessons learned from a company that has drilled hundreds of successful wells in Western Canada
•Examining how monitoring and measurement systems have been utilized to identify unnecessary drilling expenses and reduce down time
•Learning how to avoid costly mistakes in the drilling program to prevent errors that can disrupt operations
Thane Jensen, SVP Operations, PennWest Exploration
9.30 Question & Answer Session
DRILLING MUDS ESTABLISHING OPTIMAL APPLICATIONS OF DIFFERENT
DRILLING MUDS TO IMPROVE WELLBORE INTEGRITY, REDUCE FORMATION DAMAGE AND AVOID FLUID LOSS WHILST
COMPLYING WITH ENVIRONMENTAL REGULATIONS
LOST CIRCULATION & FORMATION DAMAGE
9.40 Decreasing The Effects Of Lost Circulation On Formation Damage To Limit Productivity Loss
•Decreasing mud loss and reservoir invasion by reducing lost circulation and formation damage
•Assessing the effectiveness of lost circulation treatments to prevent the need for remedial cementing
•Discussing the importance of mud selection to avoid losing expensive muds and damaging formations
•Examining the compatibility of the different muds and formations to ensure the best selection for each situation
Amanda Perry, Drilling Fluids Optimization Engineer, Shell Canada
10.10 Question & Answer Session
10.20 Morning Refreshments In Exhibition Showcase Area
DRILLING MUDS
10.50 Examining How Selecting The Right Drilling Fluids/Muds Can Extend The Reach Of Horizontal Wells, Decrease Fluid Losses And Increase Wellbore Strength: The Application Of Nanoparticles
•Decreasing costs related to fluid loss and reducing environmental impact through the use of nano-particle based drilling fluids
•Examining how the latest drilling fluids can strengthen the wellbore to eliminate the need for intermediate casing
•Understanding how invert emulsion drilling fluids can decrease friction and extend the reach of current rigs and equipment
•Detailing the sealing capacities of new drilling fluids compared to conventional fluids
Dr. Maen Husein, Associate Professor, University of Calgary
11.20 Question & Answer Session
DRILL CUTTINGS DISPOSAL
11.30 Assessing How To Cost-Effectively Dispose Of Drill Cuttings To Meet Local Environmental Regulations Without Disruption To Operations
•Exploring the storage of drill cuttings to ensure adherence to stringent environmental regulations
•Discussing the transportation of drill cuttings to move to disposal sites at the lowest expenditure
•Understanding current regulations on sampling and measures to be taken to follow these regulations
•Scrutinizing new regulations on drill cuttings disposal to assess how this will affect operations in terms of additional time and expenditure
Devin Allibone, Lead Environmental Coordinator, Canadian Natural Resources Ltd.
12.00 Question & Answer Session
12.10 Lunch In Exhibition Showcase Area
LANDING & STAYING IN ZONE EXPLORING HOW TO EFFECTIVELY TARGET AND DRILL IN THE
PAY ZONE WHILST MAINTAINING WELLBORE INTEGRITY
STAYING IN ZONE
1.10 Chasing The Pay Zone Vs. Ensuring Wellbore Integrity: How To Prevent Tools Getting Stuck Whilst Enabling Optimal Recovery
•Understanding the balance between hitting sweet spots and avoiding unwanted doglegs to strive for a smooth well path whilst optimizing potential productivity
•Discussing how to form an effective plan to achieve optimal well placement
•Highlighting the value of replicating previous wells but also knowing when your methods need to evolve
• Improving communication within the multi-disciplinary team to ensure these balances are maintained throughout the production process
Larry Kovac, VP Exploration, Cirdan Resources
1.40 Question & Answer Session
DIRECTIONAL & DOWNHOLE TOOLS EXAMINING THE EFFECTIVENESS AND APPLICATION OF
DIRECTIONAL & DOWNHOLE TOOLS TO EXTEND THE REACH OF LATERALS AND REDUCE NON-PRODUCTIVE TIME
ROTARY STEERABLE VS. CONVENTIONAL
1.50 Comparing Costs And Relative Trade-Offs Of Rotary Steerable And Conventional Drilling Tools To Identify Their Application in Different Situations
•Examining drilling and build rates of both tools in different formations to ascertain whether differences in efficiency are universal
•Discussing the effect each tool has on wellbore integrity to avoid wasting crucial time fishing out stuck tools
•Exploring the mean time between failures of each tool to understand their reliability and reduce time spent tripping out
•Understanding the collaborative approach to best utilize the strengths of each tool and further extend lateral reach whilst maintaining ROP
John Hunter, Senior Drilling Engineer, Apache CorpJon Ball, Directional Drilling/Rotary Steerable Champion, Weatherford Drilling Services
2.35 Question & Answer Session
DRILL BITS
2.45 Assessing The ROP, Steerability And Durability Of Drill Bits To Reduce Non-Productive Time And Achieve An Efficient Build Section
•Scrutinizing the compromise between ROP and durability to increase drilling time but at the same time avoid tearing up the bit
•Examining the performance of different drill bits to understand their application in different formations
• Identifying the specifications of the various drill bits that enhance steerability to effectively build to the lateral leg more efficiently
•Combining optimal motor configurations with the right bit to ensure steerability is further enhanced
Michael Krooshoop, Drilling Manager, Arcan Resources
3.15 Question & Answer Session
3.25 Afternoon Refreshments In Exhibition Showcase Area
PANEL: MWD/LWD TOOLS
3.55 Examining How The Application Of MWD And LWD Tools Can Achieve An Optimal Well Path And Reveal Vital Information On Drilling Mechanics And Formation Properties
•Optimizing the use of measuring and logging tools to plot the appropriate well path
•Examining the optimal use of geosteering when deviating from the well plan to effectively target the pay zone
•Comparing mud pulse and electromagnetic telemetry to discover where different data transmission methods are best applied
•Understanding the advantages of obtaining information on drill bit condition to maintain weight on bit and reduce torque and drag
Panel Introduction: Larry Kovac, VP Exploration, Cirdan ResourcesPanelist: John Anderson, Chief Geologist, Terra Energy CorpPanelist: Martin Rejman, Drilling Engineer, PennWest ExplorationPanelist: Ryan Quigg, Special Project Coordinator, Weatherford Drilling Services
4.25 Audience Join In For Question & Answer Session
PANEL: NEW DIRECTIONAL & DOWNHOLE TECHNOLOGIES
4.45 Discovering New Directional Tools And Technologies To Highlight Potential Cost Savings That Could Be Made In Horizontal Drilling
•Comparing the cost-benefit of existing directional and downhole technologies to determine where improvements and innovations are needed
•Rotary Steerable Tools
•PDC bits
•Discussing applications of new drill bit designs to assess the consequences for ROP and durability
• Improving the steerability of drill bits to ensure that those providing the best ROP are able to be used for the build section
•Measuring the reliability of rotary steerable tools to identify the most durable tool for the situation and thus reduce non-productive time
•Discovering the very latest advancements in directional and downhole tools to explore opportunities for future time and cost savings in horizontal drilling
Panel Introduction: John Hunter, Senior Drilling Engineer, Apache CorpPanelist: Paul Storey, Operations Manager, Equal EnergyPanelist: Olumide Adedipe, Drilling Business Intelligence Analyst, Ryan Directional Services
5.25 Audience Join In For Question & Answer Session
BRIEFING
5.35 Hearing The Benefits Of Using A Centralized And Normalized Template To Create Drilling Intelligence And Thus Facilitate Reduction In Both Drilling Time And Mistakes
•Olumide Adedipe, Drilling Business Intelligence Analyst, Ryan Directional Services
5.50 Question & Answer Session
6.00 Chair’s Closing Remarks
6.10 – 7.10 Networking Drinks Reception In Exhibition Area
www.horizontal-drilling-canada-2012.com
Day 2: DRILLING METHODS, WELL DESIGNS, COMPLETIONS ASSEMBLIES & RIG DESIGNS
Da
y T
wo
Thu
rsda
y Ju
ly 1
9 20
12 8.50 Chair’s Opening Remarks
Dan Allan, President & CEO, Cumberland Oil & Gas & Chairman, Canadian Society For Unconventional Resources
KEYNOTE
9.00 Three Cardium Cases Studies – Evolution to the Most Efficient Drilling Techniques
•Examining evolving techniques employed to facilitate high recovery wellbores: liners vs. monobores, oil vs. water completions, frac density and tonnage, horizontal length
•Comparing the benefits of inter-industry sharing of ideas vs. the costs of going it alone
•Pushing the envelope to improve results... and pulling back
•Applying ideas and methods from one area to anotherGarrett Ulmer, VP Engineering, Bellatrix Exploration
9.30 Question & Answer Session
DRILLING METHODS SCRUTINIZING DIFFERENT DRILLING METHODS TO STRIKE A BALANCE BETWEEN REDUCED DRILLING TIMES, INCREASED
COSTS AND LEVELS OF PRODUCTION
UNDERBALANCED VS. MANAGED PRESSURE
9.40 The Use Of UBD And MPD In Tight Gas Reservoirs: Applications And Relevance
•Evaluating the potential for production and costs associated with each method to formulate which is most appropriate in different situations
•Comparing the ROP of drilling underbalanced and managed pressure to identify opportunities for reduction in drilling times
•Exploring the level of invasiveness of each method to reduce damage to the formation and thus increase levels of production
•Discussing the kick tolerance associated with both methods to determine the usefulness of their application in instable formations
Hassan Malik, Senior Drilling Engineer & Global Focal Point, ConocoPhillipsSheldon Sephton, Business Development Manager - North America, Weatherford Secure Drilling Services
10.25 Question & Answer Session
10.35 Morning Refreshments In Exhibition Showcase Area
WELL DESIGN COMPARING COMMON WITH EMERGING WELL DESIGNS TO
OPTIMIZE PRODUCTION CAPABILITIES WHILST MAINTAINING WELLBORE INTEGRITY
MONOBORE VS. INTERMEDIATE CASING
11.05 Comparing The Positives And Negatives Of Drilling A Monobore And Setting Intermediate Casing To Determine Which Is Most Cost Effective
•Assessing the application of designs in different formations to establish when spending more initially may help reduce expenditure in the long-term
•Exploring the application of designs in extended reach laterals to ensure appropriate containment of hydrostatic pressure
•Realizing the difference between the wellbore integrity and kick tolerance of both designs to aid design choice
•Understanding the effect of each design on productivity levels to improve completions potential
Kyle Pisio, Completions Engineer, Canadian Natural Resources Ltd.
11.35 Question & Answer Session
MULTI-WELL PADS
11.45 Evaluating The Use Of Multi-Well Pads And Effective Well Placement To Determine Optimal Production And Well Construction Costs
•Realizing the need to use more advanced equipment to save time rigging up and down when moving around multi-well pads
•Examining the reduction in equipment required in multi-well pads to identify the possible reduction in surface operations and disturbance
• Identifying the potential number of wells that can exist on a pad and reach of the lateral to ascertain how the cost-benefit factor compares to single well pads
•Understanding the importance of effective well placement to ensure smooth running of the pad where different operations might overlap
Martin Rejman, Drilling Engineer, PennWest Exploration
12.15 Question & Answer Session
12.25 Lunch In Exhibition Showcase Area
MULTILATERALS
1.25 Assessing The Increased Reservoir Exposure Vs. Operational Risk Of Wellbores With Multiple Laterals To Forecast Cost-Benefit
•Examining the current application of multilaterals in Western Canada to explore possible implementation in other areas
•Recognizing how the subsequent reduction in surface operations can minimize both surface footprint and expenditure
•Comparing the well production of multilaterals vs. single laterals to assess their potential economic return
•Discussing the reduced frac tonnage and unstimulated region near the lateral junction to assess how this affects the overall productivity of the well
Tim Leshchyshyn, Completions Advisor, Alberta Innovates
1.55 Question & Answer Sessiona
COMPLETIONS ASSEMBLY ASSESSING THE PRODUCTION CAPABILITIES AND DRAW BACKS OF THE DIFFERENT COMPLETIONS ASSEMBLIES
TO COST EFFECTIVELY MAXIMIZE PRODUCTION POTENTIAL DURING STIMULATION
OPENHOLE VS. CEMENTED LINER
2.05 Comparing Multistage Cemented Liner And Openhole System Completion Technologies: Case Study From The Montney Resource Play
•Exploring the differences between cemented liner and openhole methodologies to ensure the economic outcome is optimized
•Examining stage to stage transmission and post stimulation drilling out of bridge plugs to assess the time associated with each technology
•Discussing the factors affecting overall completion costs, particularly stimulation, drill-out time and unplanned time
•Scrutinizing post-stimulation production differences per frac stage and cumulative production over time to determine which technology will give you the desired result of high well profitability
Brad Wilson, Drilling Manager, Murphy Oil
2.35 Question & Answer Session
2.45 Afternoon Refreshments In Exhibition Showcase Area
CEMENTING
3.15 Establishing Cementing Best Practices For Protecting Shallow Fresh Water Zones And Ensuring Zonal Isolation Quality
•Overcoming the challenges associated with cementing in horizontal wellbores including centralization, wet shoes and cement-left-in-pipe
•Determining the required properties of spacers and cement slurries to aid in horizontal cementing
•Explaining on-site cementing procedures and best practices to help ensure zonal isolation quality
•Understanding effective post job cement evaluations to ensure cementing is of the required standard
Kirk Harris, Cementing Specialist, Talisman Energy
3.45 Question & Answer Session
BALL DROP LINERS
3.55 Examining How To Construct Horizontal Wells With Ball Drop Liners To Avoid Issues Down The Line Such As Drilling Out Balls And Seats
•Examining the production benefits of using the ball drop system to identify its current applications
•Exploring the advantage of stimulating individual zones to create a cost-benefit analysis for using the ball drop system
•Assessing the resources required to drill out balls and seats to quantify the severity of potential incurred costs
•Learning about new retrievable technologies to reduce time spent drilling out balls and seats
Dave Jones, Completions Superintendent, Devon Canada
4.25 Question & Answer Session
ADVANCING CURRENT TECHNOLOGIES AND DISCOVERING NEW ONES TO DISCOVER POTENTIAL OPPORTUNITIES FOR
COST REDUCTION AND TIME SAVING
RIG DESIGN
4.35 Exploring Current Rig Parameters And Limitations To Assess Capabilities Related To Extended Reach Laterals And Multi-Well Pads
•Comparing the different types of rigs in relation to height, rotation method, pipe, power type and derrick position to learn what design aspects affect reach of laterals
•Scrutinizing the different fuels used to power the rigs to find the most cost effective option
•Exploring how the larger amount of down hole pressure required in extended reach laterals can be limited by surface pressure limitations of the rigs
•Discovering how new and emerging rig designs can optimize the drilling process in multi-well pads
Hammad Zafar, Drilling Engineer, Nexen Inc
5.05 Question & Answer Session
5.15 Chair’s Closing Remarks & End Of Conference
www.horizontal-drilling-canada-2012.com
Encana Oil & Gas
“I thought the conference
was great. It was very well
organized and I felt the content
was superb.”
CNRL
“Overall the conference
was very informative. Good
networking opportunity.”
I would like to register the delegate(s) belowfor the 2 day conference Horizontal Drilling, Tight Oil Plays, Western Canadian Sedimentary Basin
PYes
DETAILS PLEASE USE CAPITALS Please photocopy for multiple delegates
Delegate 1 * MissMiss* MsMs* MrsMrs * Mr * DrDr* Other
Name
Position
Delegate 2 * MissMiss* MsMs* MrsMrs * Mr * DrDr* Other
Name
Position
Organization
Address
Country Zip/Postal Code
Telephone Fax
Email Signature
DELEGATE RATES We have team discounts so you can involve your whole organization or team
DELEGATE FEES (Guests are responsible for their own travel and accommodation arrangements)
Standard Rate
2 Day Conference * $1799
2 Day Conference + Conference Audio Proceedings * $2098
Presentation Materials + Conference Audio Proceedings Only *$499
HOW TO REGISTER Please Return Your Completed Registration Form To Our Customer Service Team
Call (1) 800 721 3915
Fax (1) 800 714 1359
Email [email protected]
Online www.horizontal-drilling-canada-2012.com
Address 44-46 New Inn Yard, London, EC2A 3EY, United Kingdom
Terms and ConditionsThe conference is being organized by Candian Business Conferences, a division of London Business Conferences Ltd, a limited liability company formed under English company law and registered in the UK no. 5090859.Cancellations received one calendar month (or the previous working day whichever is the earliest) before the event will be eligible for a refund less $150 administration fee. Cancellations must be made in writing. After that point no refund can be made. If you are unable to attend, no refund can be given but you may nominate a
colleague to take your place.Canadian Business Conferences reserves the right to alter or cancel thespeakers or program. Receipt of thibooking form, inclusive or exclusive of payment constitutes formal agreement to attend and acceptance of the terms and conditions stated.*If you are claiming the early booking discount this may not be used in conjunction with other discounts advertised elsewhere.We would like to keep you informed of other Canadian Business Conferences products and services. This will be carried out in accordance with the Data Protection Act. Please
write to the Head of Marketing, Canadian Business Conferences at the address below if you specifically do not want to receive this information.Canadian Business Conferences. 2300 M Street, NW. Suite 800. Washington, DC 20037. USACanadian Business Conferences will not accept liability for any individual transport delays and in such circumstances the normal cancellation restrictions apply. Canadian Business Conferences is a Division of London Business Conferences Limited, Registered in England No. 5090859 EIN. no: 98-0514924
PAYMENT Please tick appropriate boxes and complete details
Payment must be received in full prior to the event.
*Check I enclose a check in Canadian Dollars payable to London Business Conferences for $
*Payment by Wire Transfer A copy of the bank transfer document should be attached to your registration form so appropriate allocation of funds can be made to your registration.
Bank: Barclays BankAccount Name: London Business ConferencesAccount Number: 75593011SWIFTBIC: BARCGB22IBAN: GB88BARC20982175593011GST : 844609917RT0001
Please charge my * Visa * American Express * Mastercard
Amount $
Card number
Name on card
Expiry date
Security Code / CVV (required)
Signature of card holder
www.horizontal-drilling-canada-2012.com