Upload
jaime-forero
View
241
Download
4
Tags:
Embed Size (px)
DESCRIPTION
Nota de aplicacion - comunicacion directa entre variadores y paneles de operador AGP3000 y LT3000.
Citation preview
Right Size, Right Technology Solutions
®
AGP3000 Operator Interfaces
15"12.1"
10.4"7.5"
5.7"3.8"
HMI Motion Control Quick Start Guides Pro-face HMI motion control quick start guides make it easy to integrate variable speeddrives directly to your operator interface and control system. With minimal knowledgea user can quickly set up a variable speed drive operator interface without requiring a separate programmable controller and drive interface wiring.Differentiating Value:• Simple, fast installation, 3 step guide with a sample project you can use• No PLC required, logic controller is built-in• Reduce system cost, no need for analog interfaces, eliminate pilot lights
and push buttons• Precision high resolution digital control
Applications:• Conveyors• Pumps and fans• Packaging equipment• Discrete manufacturing
These instructions along with the downloadable sample project facilitate quickly connecting and establishing communications between a Pro-face AGP using GP-Pro EX and a Hitachi L200 Inverter. For a full explanation of this project refer to Pro-face America Application Note 1156.
Materials:1. Pro-face GP-Pro EX Screen and Logic Editing software v2.1 or higher 2. Pro-face AGP3000 or AST3000 Series HMI3. Hitachi L200 Inverter4. Pro-face CA3-ADPCOM-01 COM1 or CA4-ADPONL-01 COM2 Port Adapter5. Pro-face CA3-ADPTRM-01 Termination Adapter6. CAT5e Ethernet Cable (Straight-Through)7. The Pro-face sample project “APNT1156.zip”
available at: https://www.hmisource.com/otasuke/files/appnotes/
Pro-face AGP/AST3000 to Hitachi L200 Inverter via Modbus RTU
Tested, Trusted, Out-of-the-Box
Continued on next page
Pro-face AGP3300-T1
Modbus Serial Cable
HitachiL200 Inverter
Right Size, Right Technology Solutions
Pro-face AGP/AST3000 to Yaskawa J7 Drive via Modbus RTU
Tested, Trusted, Out-of-the-Box
®
AGP3000 Operator Interfaces
HMI Motion Quick Start GuidesPro-face HMI motion control quick start guides make it easy to integrate variable speed drives directly to your operator interface and control system. With minimal knowledge a user can quickly set up a variable speed drive operator interface without requiring a separate programmable controller and drive interface wiring.
Differentiating Value:• Simple, fast installation, 3 step guide with a sample project you can use• No PLC required, logic controller is built-in• Reduce system cost, no need for analog interfaces, eliminate pilot
lights and push buttons• Precision high resolution digital control
Applications:• Conveyors• Pumps and fans• Packaging equipment• Discrete manufacturing
These instructions along with the downloadable sample project facilitate quickly connecting and establishing communications between a Pro-face AGP using GP-Pro EX and a Yaskawa J7 Drive. For a full explanation of this project refer to Pro-face America Application Note 1157.
Materials:1. Pro-face GP-Pro EX Screen and Logic Editing software v2.1 or higher 2. Pro-face AGP3000 or AST3000 Series HMI3. Yaskawa J7 Drive4. Yaskawa SI-485/J7 Modbus RS485 Adapter5. Pro-face CA4-ADPONL-01 COM2 Port Adapter6. Pro-face CA3-ADPTRM-01 Termination Adapter7. 5-Wire Shielded Cable8. The Pro-face sample project “APNT1157.zip”
available at: https://www.hmisource.com/otasuke/files/appnotes/
Continued on next page
15"12.1"
10.4"7.5"
5.7"3.8"Pro-face AGP3300-T1
Modbus Serial Cable
Yaskawa J7 Drive
Right Size, Right Technology Solutions
®
AGP3000 Operator Interfaces
15"12.1"
10.4"7.5"
5.7"3.8"
HMI Motion Control Quick Start Guides Pro-face HMI motion control quick start guides make it easy to integrate variable speed drives directly to your operator interface and control system. With minimal knowledge a user can quickly set up a variable speed drive operator interface without requiring a separate programmable controller and drive interface wiring.
Differentiating Value:• Simple, fast installation, 3 step guide with a sample project you can use• No PLC required, logic controller is built-in• Reduce system cost, no need for analog interfaces, eliminate pilot lights
and push buttons• Precision high resolution digital control
Applications:• Conveyors• Pumps and fans• Packaging equipment• Discrete manufacturing
These instructions along with the downloadable sample project facilitate quickly connecting and establishing communications between a Pro-face AGP using GP-Pro EX and an Eaton MVX9000 AF Drive. For a full explanation of the project refer to Pro-face America Application Note 1169.
Materials:1. Pro-face GP-Pro EX Screen and Logic Editing software v2.1 or higher 2. Pro-face AGP3000 or AST3000 Series HMI3. Eaton MVX9000 Variable Frequency AC Drive 4. Pro-face CA3-ADPCOM-01 Port Adapter or CA4-ADPONL-01 COM2 Port Adapter 5. Pro-face CA3-ADPTRM-01 Termination Adapter6. RJ-12 cable. 8. The Pro-face sample project “APNT1169.zip”
available at: https://www.hmisource.com/otasuke/files/appnotes/
Pro-face AGP/AST3000 to Eaton MVX9000 AF Drive via Modbus
Tested, Trusted, Out-of-the-Box
Continued on next page
Pro-face AGP3300-T1
Modbus Serial Cable
Eaton MVX9000 AF Drive
Right Size, Right Technology Solutions
®
AGP3000 Operator Interfaces
15"12.1"
10.4"7.5"
5.7"3.8"
HMI Motion Control Quick Start Guides Pro-face HMI motion control quick start guides make it easy to integrate variable speed drives directly to your operator interface and control system. With minimal knowledge a user can quickly set up a variable speed drive operator interface without requiring a separate programmable controller and drive interface wiring.
Differentiating Value:• Simple, fast installation, 3 step guide with a sample project you can use• No PLC required, logic controller is built-in• Reduce system cost, no need for analog interfaces, eliminate pilot lights
and push buttons• Precision high resolution digital control
Applications:• Conveyors• Pumps and fans• Packaging equipment• Discrete manufacturing
These instructions along with the downloadable sample project facilitate quickly connecting and establishing communications between a Pro-face AGP using GP-Pro EX and a Telemecanique Altivar 31 or 71 Adjustable Speed Drive Controller. For a full explanation of this project refer to Pro-face America Application Note 1163.
Materials:1. Pro-face GP-Pro EX Screen and Logic Editing software v2.1 or higher 2. Pro-face AGP3000 Series HMI with ladder logic programming feature3. Telemecanique Altivar 31 or 71 Adjustable Speed Drive Controller 4. Pro-face CA3-ADPCOM-01 Port Adapter or CA4-ADPONL-01 COM2 Port Adapter 5. Pro-face CA3-ADPTRM-01 Termination Adapter6. Industrial RJ-45 cable 7. The Pro-face sample project “APNT1163.zip”
available at: https://www.hmisource.com/otasuke/files/appnotes/
Pro-face AGP3300-T1
Modbus Serial Cable
Altivar 31Adjustable Speed Drive
Pro-face AGP3000 to Altivar Adjustable Speed Drive via Modbus RTU
Tested, Trusted, Out-of-the-Box
Continued on next page
Right Size, Right Technology Solutions
®
AGP3000 Operator Interfaces
15"12.1"
10.4"7.5"
5.7"3.8"
HMI Motion Control Quick Start Guides Pro-face HMI motion control quick start guides make it easy to integrate variable speed drives directly to your operator interface and control system. With minimal knowledge a user can quickly set up a variable speed drive operator interface without requiring a separate programmable controller and drive interface wiring.
Differentiating Value:• Simple, fast installation, 3 step guide with a sample project you can use• No PLC required, logic controller is built-in• Reduce system cost, no need for analog interfaces, eliminate pilot lights
and pushbuttons• Precision high resolution digital control
Applications:• Conveyors• Pumps and fans• Packaging equipment• Discrete manufacturing
These instructions along with the downloadable sample project facilitate quickly con-necting and establishing communications between a Pro-face AGP using GP-Pro EX and ABB ACS350 Variable Frequency AC Drive. For a full explanation of this project refer to Pro-face America Application Note 1161.
Materials:1. Pro-face GP-Pro EX Screen and Logic Editing software v2.1 or higher 2. Pro-face AGP3000 or AST3000 Series HMI3. ABB ACS350 Variable Frequency AC Drive 4. ABB FMBA-01 Modbus Adapter5. Pro-face CA3-ADPCOM-01 Port Adapter or CA4-ADPONL-01 COM2 Port Adapter 6. Pro-face CA3-ADPTRM-01 Termination Adapter7. 3 Conductor shielded cable8. The Pro-face sample project “APNT1161.zip”
available at: https://www.hmisource.com/otasuke/files/appnotes/
Pro-face AGP/AST3000 to ABB ACS350 VF Drive via Modbus RTU
Tested, Trusted, Out-of-the-Box
Continued on next page
Pro-face AGP3300-T1
Modbus Serial Cable
ABBABB ACS350 Drive
Right Size, Right Technology Solutions
®
AGP3000 Operator Interfaces
Continued on next page
15"12.1"
10.4"7.5"
5.7"3.8"
HMI Motion Control Quick Start Guides Pro-face HMI motion control quick start guides make it easy to integrate variable speed drives directly to your operator interface and control system. With minimal knowledge, a user can quickly set up a variable speed drive operator interface without requiring a separate programmable controller and drive interface wiring.
Differentiating Value:• Simple, fast installation, 3 step guide with a sample project you can use• No PLC required, logic controller is built-in• Reduce system cost, no need for analog interfaces and indicators,
fewer push buttons • Precision high resolution digital control
Applications:• Conveyors• Pumps and fans• Packaging equipment• Discrete manufacturing
This document and the downloadable sample project facilitate quickly connecting and establishing communications between a Pro-face AGP/AST using GP-Pro EX and an Allen-Bradley PowerFlex® 4 Variable Frequency AC Drive. For a full explanation of the sample project refer to Pro-face America Application Note 1160.
Materials:1. Pro-face GP-Pro EX Screen and Logic Editing software v2.1 or higher 2. Pro-face AGP3000 or AST3000 Series HMI3. Allen Bradley PowerFlex® 4 Variable Frequency AC Drive 4. Pro-face CA3-ADPCOM-01 Port Adapter or CA4-ADPONL-01 COM2 Port Adapter 5. Pro-face CA3-ADPTRM-01 Termination Adapter6. Category 5 shielded 8-conductor cable with a shielded male RJ45 connector 7. The Pro-face sample project “APNT1160.zip”
available at: https://www.hmisource.com/otasuke/files/appnotes/
Pro-face AGP3300-T1
Modbus Serial Cable
Allen-BradleyPowerFlex 4 AF Drive
Pro-face AGP/AST3000 to Allen-Bradley PowerFlex® 4 VF Drive via Modbus RTU
Tested, Trusted, Out-of-the-Box
Right Size, Right Technology Solutions
Pro-face AGP/AST3000 to Omron SYSDRIVE JX Series Inverter via Modbus RTU
Tested, Trusted, Out-of-the-Box
®
AGP3000 Operator Interfaces
HMI Motion Quick Start Guides Pro-face HMI motion control quick start guides make it easy to integrate variable speed drives directly to your operator interface and control system. With minimal knowledge a user can quickly set up a variable speed drive operator interface without requiring a separate programmable controller and drive interface wiring.
Differentiating Value:• Simple, fast installation, 3 step guide with a sample project you can use• No PLC required, logic controller is built-in• Reduce system cost, no need for analog interfaces, eliminate pilot
lights and push buttons• Precision high resolution digital control
Applications:• Conveyors• Pumps and fans• Packaging equipment• Discrete manufacturing
These instructions along with the downloadable sample project facilitate quickly connecting and establishing communications between a Pro-face AGP using GP-Pro EX and an Omron SYSDRIVE JX Series Inverter. For a full explanation of this project refer to Pro-face America Application Note 1173.
Materials:1. Pro-face GP-Pro EX Screen and Logic Editing software v2.1 or higher 2. Pro-face AGP3000 or AST3000 Series HMI3. Omron SYSDRIVE JX Series Inverter 4. Pro-face CA3-ADPCOM-01 COM1 or CA4-ADPONL-01 COM2 Port Adapter5. Pro-face CA3-ADPTRM-01 Termination Adapter6. CAT5e Ethernet Cable (Straight-Through)7. The Pro-face sample project “APNT1173.zip”
available at https://www.hmisource.com/otasuke/files/appnotes/
Continued on next page
15"12.1"
10.4"7.5"
5.7"3.8"Pro-face AGP3300-T1
Modbus Serial Cable
Omron SYSDRIVE JX Series Inverter
Right Size, Right Technology Solutions
HMI Motion Control Quick Start Guides Pro-face HMI motion control quick start guides make it easy to integrate variable speed drives directly to your operator interface and control system. With minimal knowledge a user can quickly set up a variable speed drive operator interface without requiring a separate programmable controller and drive interface wiring.
Differentiating Value:• Simple, fast installation, 3 step guide with a sample project you can use• No PLC required, logic controller is built-in• Reduce system cost, no need for analog interfaces, eliminate pilot lights
and push buttons• Precision high resolution digital control
Applications:• Conveyors• Pumps and fans• Packaging equipment• Discrete manufacturing
These instructions along with the downloadable sample project facilitate quickly con-necting and establishing communications between a Pro-face LT3000 using GP-Pro EX and a Telemecanique Altivar 71 Adjustable Speed Drive Controller. For a full explanation of this project refer to Pro-face America Application Note 1172.
Materials:1. Pro-face GP-Pro EX Screen and Logic Editing software v2.2 or higher 2. Pro-face LT3300 Series HMI3. Pro-face CA8-CANLT-01 CANopen master module4. Telemecanique Altivar 71 Adjustable Speed Drive Controller 5. Telemecanique VW3 CAN A71 CANopen adapter6. The Altivar drive EDS file “TEATV71xyE.eds” where x.y: is the drive software version7. Standard CANopen network cable with DB9 CANopen bus connectors8. The Pro-face sample project “APNT1172.zip”
available at: https://www.hmisource.com/otasuke/files/appnotes/
Pro-face LT3000 CANopen Master to a Telemecanique Altivar 71 Adjustable Speed Drive
Tested, Trusted, Out-of-the-Box
Continued on next page
Pro-face LT3000 with CANopen Master Module
AltivarAdjustable Speed Drive
CANopen Cable
®
LT3000 Operator Interfaces
LT CANopen
Master Unit