Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
OPERATING MANUAL AND USER GUIDE
1
IMPORTANT WARNINGS & SAFETY INSTRUCTIONS
1. READ ALL INSTRUCTIONS – carefully and become familiar with the features and functions of these
products before operating them.
2. RETAIN THESE INSTRUCTIONS – for future reference.
3. COMPLY WITH ALL WARNINGS – All warnings and instructions for this product should be adhered to.
4. USE WITH AMPLIFIERS – In order to avoid damage to drivers and other equipment, it is advisable to
establish and follow a routine for powering up and powering down a sound system. With all system
components connected, turn on source equipment (mixers, signal processors, record and playback
units, etc.) BEFORE powering up amplifiers. Transient voltages from powering up source equipment
can damage speakers if amplifiers are already turned on. Make sure that amplifier volumes are
set to their minimum settings and power up any system amplifiers LAST. It is recommended that
all system components be allowed to stabilize for several seconds before any source signals are
introduced or level setting adjustments are made. Similarly, when shutting systems down, turn all
amplifiers off first, before powering down any other system components.
5. CABLES – Do not use shielded or microphone cables for connection between amplifiers and speakers.
Use only approved speaker cables with proper connectors.
6. RIGGING – SUSPENDING – MOUNTING – Rigging, suspending and mounting of these speaker
systems can expose members of the public to serious health risks and even death. UNDER NO
CIRCUMSTANCES ATTEMPT TO RIG, SUSPEND OR OTHERWISE MOUNT THESE SPEAKERS UNLESS
YOU ARE FULLY QUALIFIED AND CERTIFIED TO DO SO BY RELEVANT LOCAL, STATE AND NATIONAL
AUTHORITIES. ALL RELEVANT SAFETY REGULATIONS MUST BE FOLLOWED. IF YOU ARE NOT
PROPERLY QUALIFIED OR DO NOT KNOW OF PERTINENT REGULATIONS, CONSULT QUALIFIED
PERSONNEL FOR ADVICE.
7. CAUTION – These professional loudspeaker systems are capable of generating very high sound
pressure levels. Use care with placement and operation to avoid exposure to excessive volume levels.
Permanent hearing damage can result when operated to extreme levels.
8. SERVICE – There are no user serviceable parts inside this product. Users should not attempt to service
this product. Warranty nullification could result if this is attempted.
series
2
1. Important Warnings and Safety Instructions…………………………....….…
2. What about the Series…………………………………………………
3. Introduction / Overview……………………………………………………....….…
4. Features……………………….…………………………………….…………….....
5. Setting up / Speaker Placement…………………………….………..................
6. Connections / Wiring……………………………………………………................
7. Specifications …………………………………….………………………….………
8. Dimensional Drawings-EVP-12 / EVP-12M ………………….......... 9. Dimensional Drawings-EVP-15 / EVP-15M ..…………………….....
10. Dimensional Drawings-EVP-215 ………………………..……………........
11. Dimensional Drawings-EVP-15SUB / EVP-18SUB..………......……………....
12. Warranty…………………………..……....…………………………..……...........
TABLE OF CONTENTS
1
3
3
4
5
6
7
9
10
11
12
13
OPERATING MANUAL AND USER GUIDE
3
Wharfedale EVP Neo Series loudspeakers are the result of many years of experience in the
use, design and manufacturing of professional loudspeaker products. We take great pride
in engineering and building every Wharfedale Pro loudspeaker and wish to thank you for
entrusting us with your sound.
From the time Gilbert Briggs built his first loudspeaker in 1932, to the present, Wharfedale
Loudspeakers have maintained the same standard of quality in components, workmanship
and performance. Actually, Wharfedale is one of a few present day manufacturers that
design, engineer and build all of their own transducers.
Please take a few minutes to read this manual completely in order to ensure that you get
the most out of your EVP Neo Series Loudspeaker system.
SERIES OVERVIEW:The EVP Neo Series are powerful, accurate, high quality loudspeaker systems with low
distortion that were designed to deliver high quality sound for the best value. From the
EVP-12 Neo to the EVP-15M Neo plus the EVP-18SUB Neo high powered sub, you have
what it takes to assemble the system that your music deserves. Other models to satisfy your
most demanding sound needs include: EVP-12M Neo, EVP-15 Neo, EVP-15M Neo, EVP-215
Neo and EVP-15SUB.
An important factor in loudspeakers, especially stage monitors, is the smoothness of the
sound coverage. Many speakers that may sound acceptable in the horizontal plane have
problems in the vertical plane. The EVP Neo™ speakers exhibit very smooth and well-
behaved sound dispersion characteristics in both the horizontal and vertical planes making
positioning and set-up less critical. Everyone on stage will hear the same quality sound.
Because of the multi-faceted cabinet design, the EVP-12M Neo and EVP- 15M Neo speakers
can be positioned on the floor as a stage monitor or mounted on a speaker stand When you
need that extra bass punch, you can choose the EVP-15SUB and the EVP-18SUB.
INTRODUCTION
Wharfedale EVP Neo Series sound reinforcement speakers are designed for demanding
sound reinforcement applications.
The EVP Neo Series loudspeakers are high quality, active speaker systems designed to
provide the best sound in a powerful, feature laden, easy to use package. They provide
transparent and accurate sound reproduction or reinforcement. The 25.4mm (1.0”) Titanium
high frequency compression driver projects crystal clear high frequencies. A proprietary
70° x 70° Conical Wave Guide (CWG) delivers the high frequencies in a well defined, even
coverage pattern. Dynamic passages, such as the crack of a snare drum or the report of a
cannon, come through just like the real thing.
The EVP Neo Series is very flexible in application. With its heavy duty components,
handles and stand socket and durable carpet finish, the EVP Neo can rise to any sound
reinforcement challenge.
WHAT ABOUT THE SERIES?
series
4
�• 2-way trapezoidal + multifaceted reflex systems
�• Passive Subwoofers
�• 1.75 inch (44 mm) Titanium diaphragm HF driver
�• Low distortion, high power steel frame woofers
�• 70° x 70° High Frequency Conical Wave Guide
�• High slope internal crossover
�• Overcurrent driver protection
�• High power 3” voice coil subwoofer (EVP-15SUB)
�• High power 4” voice coil subwoofer (EVP-18SUB)
�• Covered in rugged black carpet
�• Rugged Diecast handles
�• Integrated Stand adapter (EVP-12 Neo, EVP-15 Neo)
�• Combo 1/4”/ NL2 input connectors
FEATURES
OPERATING MANUAL AND USER GUIDE
5
The uniform dispersion of the EVP Neo Series makes it easy to position the speakers where
you need them, rather than trying to rearrange the room to accommodate the sound
system. And the trapezoidal shaped cabinet with heavy duty handles makes transporting
the speakers that much easier. An integral Aluminium stand socket allows you to place the
speakers high above the audience for best sound coverage.
When you don’t think you are getting all the bass you need, the EVP Neo series has a
couple of great subwoofers: the EVP-15SUB and EVP-18SUB. These are powerful bass reflex
subwoofers that gives you the lowest frequencies and the punch you need. They are straight
forward, no nonsense, bass reflex subwoofers with exceptional low frequency response.
SETTING UP/ SPEAKER PLACEMENT
CONNECTIONS / WIRINGConnecting the EVP Neo Series to your system is easy. The input panel includes parallel
TRS 6.35mm (1/4”) and NL2 connectors. Run your speaker wires from your amplifier, to the
speaker; you can use either input connector. Be sure to use high quality, low gauge (thick)
speaker wire and NOT shielded cable.
The EVP-15SUB and EVP-18SUB Subwoofers have output jacks so you can use just one
channel of an amplifier for your full range system. You run your speaker wires to the
input of the sub and another speaker wire from the subwoofer output to the input of the
full range speaker on a stand or sitting atop the sub. Placement depends on your sound
coverage requirements.
series
6
EVP Neo with connections
AMPLIFIER OUTPUTS
OUTPUTA
OUTPUTB
PASSIVE SUBWOOFERTO FULL-RANGE OUTPUIT
PARALLEL INPUT
PASSIVE SUBWOOFERINPUT
OPERATING MANUAL AND USER GUIDE
7
SPECIFICATIONS
12" 2-way
50Hz-20kHz
98dB
70°x70°
128dB
���Ÿ
250W
500W
1000W
305mm/12"
51.6mm/2"
Steel
44mm/1.75"
25mm/1"
Titanium
Round
1"
2 way full range
Bulb/SK3
590mm/23.23"
400mm/15.75"
274mm/10.79"
363mm/14.29"
16kg/35.2lbs
Trapezoid
Carpet or Painted
Black
MDF
12mm
Steel
1.2mm
2xSpeakon +
1/4" Jack combi
Model name
System Specification
System Type
Frequency Response (+/- 3dB)
Sensitivity 1w@1m
Nominal Dispersion (H X V)
Peak SPL
System impedance
Power Handling
Continuous
Music
Peak
LF Driver
LF driver size
Coil size
Frame matlerial
HF Section
Coil size
Exit size
Diaphragm material
HF Horn
Shape
Throat size
Crossover Section
Type
Protection
Dimensions
Height
Front
Back
Depth
Weight net
Enclosure shape
Finish
Finish colou
Construction material
Thickness
Grille
Material
Thickness
In/out Pannel
Connectors input
15" 2-way
41Hz-20kHz
98dB
70°x70°
128dB
���Ÿ
300W
600W
1200W
380mm/15"
64.26mm/2.5"
Steel
44mm/1.75"
25mm/1"
Titanium
Round
1"
2 way full range
Bulb/SK3
675mm/26.57"
446.5mm/17.58"
285.3mm/11.23"
452.2mm/17.8"
22.5kg/49.5lbs
Trapezoid
Carpet or Painted
Black
MDF
12mm
Steel
1.2mm
2xSpeakon +
1/4" Jack combi
12" 2-way
monitor
55Hz-20kHz
98dB
70°x70°
128dB
���Ÿ
250W
500W
1000W
305mm/12"
51.6mm/2"
Steel
44mm/1.75"
25mm/1"
Titanium
Round
1"
2 way monitor
Bulb/SK3
311.6mm/12.27"
570mm/22.44"
--
369.6mm/14.55"
13.5kg/29.7lbs
Monitor
Carpet or Painted
Black
MDF
12mm
Steel
1.2mm
2xSpeakon +
1/4" Jack combi
15" 2-way
monitor
48Hz-20kHz
98dB
70°x70°
128dB
���Ÿ
300W
600W
1200W
380mm/15"
64.26mm/2.5"
Steel
44mm/1.75"
25mm/1"
Titanium
Round
1"
2 way monitor
Bulb/SK3
355.3mm/13.98"
655mm/25.79"
--
429.1mm/16.89"
16.8kg/36.96lbs
Monitor
Carpet or Painted
Black
MDF
12mm
Steel
1.2mm
2xSpeakon +
1/4" Jack combi
series
8
SPECIFICATIONS
Quasi 3 Way
38Hz-20kHz
99dB
70°x70°
133dB
���Ÿ
600W
1200W
2400W
380mm/15"
64.26mm/2.5"
Steel
44mm/1.75"
25mm/1"
Titanium
Round
1"
quasi-3 way full range
Bulb/SK3
1070mm/42.13"
502mm/19.76"
335.7mm/13.22"
472.4mm/18.6"
36.5kg/80.3lbs
Trapezoid
Carpet or Painted
Black
MDF
12mm
Black
1.2mm
2xSpeakon +
1/4" Jack combi
Model name
System Specification
System Type
Frequency Response ( +/- 3dB)
Sensitivity 1w@1m
Nominal Dispersion (H X V)
Peak SPL
System impedance
Power Handling
Continuous
Music
Peak
LF Driver
LF driver size
Coil size
Frame matlerial
HF Section
Coil size
Exit size
Diaphragm material
HF Horn
Shape
Throat size
Crossover Section
Type
Protection
Dimensions
Height
Front
Back
Depth
Weight net
Enclosure shape
Finish
Finish colour
Construction material
Thickness\
Grille
Type
Thickness
In/out Pannel
Connectors input
15" compact
subwoofer
45Hz-150Hz
100dB
--
132dB
���Ÿ
400W
800W
1600W
380mm/15"
77.06mm/3.0"
Steel
--
--
--
--
--
--
subwoofer
--
454mm/17.87"
562mm/22.13"
--
594.4mm/23.4"
31.5kg/69.3lbs
Rectangular
Carpet or Painted
Black
MDF
15mm
Black
1.5mm
2xSpeakon +
1/4" Jack combi
18" compact
subwoofer
38Hz-150Hz
99dB
--
133dB
���Ÿ
600W
1200W
2400W
470mm/18"
102.62mm/4.0"
Die Cast Aluminivm
--
--
--
--
--
--
subwoofer
--
531mm/20.9"
611mm/24.06"
--
629.5mm/24.78"
41.2kg/90.64lbs
Rectangular
Carpet or Painted
Black
MDF
15mm
Black
1.5mm
2xSpeakon +
1/4" Jack combi
OPERATING MANUAL AND USER GUIDE
9
DIMENSIONAL DRAWINGS
400.00 363.00
274.00
590.
00
165º
86º
311.
50
570.00
570.
00
119.00
483.50