PROFESSIONAL UPDATES

Dr.V.VIJAYAN M.E.,Ph.D, MISTE. S/o A.Venkatraman

Kuppurepatti- Post,

Lalapet- Via,

Krishnarayapuram-Taluk,

Karur-District.

E-Mail : vijayan.me@gmail.com

Mobile : +91 900 3971 300

CAREER OBJECTIVE

Am looking for a good opportunity to work in the field of research and development.

Also interested in motivating young researches to create new ideas through academic knowledge.

EDUCATIONAL QUALIFICATION

Course

Name of Institution Board/University

Year of

Completion

PhD

Design of

Complaint

Mechanism

____ Anna University

Chennai 2015

M.E

Engineering

Design

Kongu Engineering

college, perundurai, Erode.

Anna University

2006

B.E

Mechanical

Engineering

R.V.S.C.E.T

RVS Nager, Dindugal.

Madurai Kamaraj

University 2004

Diploma in

Mechanical

Engineering

The Karur Polytechnic,

Karur.

Board of Technical

Education 2000

A.I.S.L.C

St.John’s Vestry Anglo

Indian Hr Sec School,

Tricy.

Anglo Indian Board 1997

EXPERIENCE

Profession Organization Designation Period

Teaching K.Ramakrishnan college of

Technology, Trichy.

Professor 5 year and

proceeding

Teaching K.Ramakrishnan college of

Engineering, Trichy.

Assistant

Professor

5 year

Teaching M.Kumarasamy college of Engineering,

Karur.

Lecturer 3 ½ year

Industry Indian coach and bus builders, Karur. Supervisor 1 year

AREA OF INTEREST

Design, Analysis of Mechanism, Optimization, Compliant Mechanism, Welding,

Additive Manufacturing.

SUBJECTS HANDLED

Design of Transmission System

Hydraulics And Pneumatics

Kinematics of Machinery

Manufacturing Technology – II

Power plant Engineering

Engineering Graphics

Basics of Civil and Mechanical

Cad lab Faculty incharge

PATENT PUBLICATION DETAILS

Published the patent titled “ELCTRONIC CONTROLLED DELAYED FUEL

INJECTION SYSTEM IN AN IC ENGINE”.

Application No : 5262/CHE/2015

Application field on : 01/10/2015

Published on : 22-04-2016

Published the patent titled “FINE ADJUSTABLE BORING BAR”.

Application No : 201641006702

Application field on : 22/02/2016

Published on : 22-04-2016

Published the patent titled “TREPANNING TOOL HOLDER”.

Application No : 201841015558

Application field on : 24-04-2018

BOOK SERIES PUBLICATION

1. B.Sureshkumar, V.Vijayan and J.Paulo Davim, 2019, Machine Vision in

measurement In: Davim J. (eds) Measurement in Machining and Tribology.

Materials Forming, Machining and Tribology. Springer, Cham.

JOURNAL PUBLICATION DETAILS

1. I. J. Isaac Premkumar, A. Prabhu, V.Vijayan, A.Godwin Antony &

R.Venkatesh, “Combustion analysis of biodiesel blends with different piston

geometries” Journal of Thermal Analysis and Calorimetry, Accepted.

2. P. Parameshwarana, V. Vijayan, K. Radhakrishnan and A. Godwin Antony, “

Evaluation of Mechanical Properties of Banana and Glass-Epoxy Hybrid

Composites with Addition of Copper Powder” Int. J. Vehicle Structures &

Systems, 11(3), 320-324.

3. M.Dhandayuthabani, S.Jegadheeswaran, V.Vijayan and A.Godwin Antony,

“Investigation of latent heat storage system using graphite microparticle

enhancement” Journal of Thermal Analysis and Calorimetry, Article in Press.

4. B.Sureshkumar, V.Vijayan, S.Dinesh, K.Rajaguru, “Neural Network

Modeling for Face Milling Operation ” Int. J. Vehicle Structures & Systems,

11(2), 224-229.

5. C.Saravanan, S.Dinesh, P.Sakthivel, V.Vijayan, B.SureshKumar,“Assessment

of mechanical properties of Silicon Carbide and Graphene reinforced

aluminium composite”, Materials Today: Proceedings, Article in Press.

6. S.Thanikaikarasan, R.Perumal, V.Vijayan, J.Venkatamuthukumar,

“Structural, compositional and optical properties of electrochemically grown

iron diselenide thin films”, Materials Today: Proceedings, Article in Press.

7. T.Raj Kumar, V.Vijayan, R.Yokeswaran, K.Saravanan, D.Ragulnath,

G.ArunKumar, P.Parameswaran, “Experimental evaluation on natural

composites with the incorporation of metal powders” Materials Today:

Proceedings, Article in Press.

8. S.Saravanan, A.V.Balan, S.Dinesh, V.Vijayan, “Electrochemical machining

behaviour of AA6063-TiC composites by using response surface

methodology, Materials Today: Proceedings, Article in Press.

9. K.Rajaguru, T.Karthikeyan, V.Vijayan, “Additive manufacturing – State of

art”, Materials Today: Proceedings, Article in Press.

10. B.Radha Krishnan, V.Vijayan, T.Parameshwaran Pillai, & T.Sathish, “Influence

of Surface Roughness in Turning Process-an Analysis Using Artificial Neural

Network”, Transactions of the Canadian Society for Mechanical Engineering,

Published in Just In.

11. V. Vijayan, B. Sureshkumar, G. Sathishkumar & R. Yokeshwaran “ Analysis of

Machining Parameters in Turning Operation on Duplex 2205 by using RSM for

Vehicle Structure” Int. J. Vehicle Structures & Systems, 11(1), 113-116.

12. A. Parthiban, V. Vijayan, S. Sathish and T. Sathish, “Optimization of Co2 Laser

Cutting Parameter on Motor Cycle Frame Materials”, International Journal of

Recent Technology and Engineering, Vol.8, No.1, pp 409 – 411.

13. T. Sathish, S. Saravanan & V. Vijayan, “Effect of reinforced aluminum alloy

LM30 with pure ceramic particles to evaluate hardness and wear properties”,

Materials Research Innovations, Article in Press.

14. N. Parkunam, P. Laxmanan, G. Navanithakrishnan, S.Arul & V.Vijayan, 2019,

“Experimental Analysis on Passive Cooling of Flat Photovoltaic Panel with

Heat Sink and Wick Structure”, Energy Sources, Part A: Recovery, Utilization,

and Environmental Effects, Article in Press. (SCI Indexed Journal).

15. M. Vivekanandan, R.Venkatesh, T.Sathish, S.Dinesh, M.Ravichandran,V.Vijayan

“Pressure Vessel Design using PV-ELITE Software with Manual Calculations

and Validation by FEM”, Journal of Engineering Technology, Vol 8, No 1, pp

425-433. (SCIE Indexed Journal).

16. P.T.Saravankumar, V. Suresh, V. Vijayan and A. Godwin Antony, 2019,

“Ecological effect of corn oil biofuel with SiO2 nano-additives”, Energy

Sources, Part A: Recovery, Utilization, and Environmental Effects, Article in

Press. (SCI Indexed Journal).

17. V.Vijayan, G.Arunkumar, G.Harithangam, S.Muthukumar & B.Ahamed

Ibrahim, 2018, “Investigation and Preparation of Fly Bottom Ash and

Discussion on Fly Ash Composition – A Review”, International Journal of

Trend in Scientific Research and Development, Vol. 3, no. 1, pp 1278-1284.

18. A. Parthiban, T. Sathish, S. Siva Chandran, R. Venkatesh, & V. Vijayan, 2019,

“Optimization of co2 laser cutting parameters on austenite stainless steel using

grey relational analysis” International Journal of Mechanical Engineering and

Technology, Vol. 10, no 1, pp. 984 –992. (Scopus Indexed Journal).

19. V.Vijayan, S.Sivachandaran, S.Saravanan and V.Sivakumar, 2018,

“Environmental effect of CI engine using microalgae biofuel with nano-

additives” Energy Sources, Part A: Recovery, Utilization, and Environmental

Effects, Article in Press (SCI Indexed Journal).

20. S. Saravanan, A. Godwin Antony, V.Vijayan, M.Loganathan, & S. Baskar, 2019,

“Synthesis of Sio2 Nano Particles by using Sol-Gel Route” International Journal of

Mechanical Engineering and Technology, Vol. 10, no 1, pp. 785 – 790. (Scopus Indexed

Journal).

21. V.Vijayan, S. Saravanan, A. Godwin Antony, M.Loganathan, & S. Baskar, 2019,

“Heat transfer enhancement in mini Compact heat exchanger by using Alumina

nanofluid” International Journal of Mechanical Engineering and Technology, Vol. 10, no 1,

pp. 785 – 790. (Scopus Indexed Journal).

22. R. Venkatesh, V. Vijayan, A. Parthiban, T. Sathish, & S. Siva Chandran, 2018,

“Comparison of different tool path in Pocket Milling” International Journal of

Mechanical Engineering and Technology, Vol. 9, no 12, pp. 922–927. (Scopus Indexed

Journal).

23. A. Godwin Antony, S. Baskar, V.Vijayan, S. Saravanan, & M.Loganathan, 2018,

“Analysis of Wear Behaviour of Aluminium Composites with Silicon Carbide and

Titanium Reinforcement” International Journal of Mechanical Engineering and Technology,

Vol. 9, no 12, pp. 681–691. (Scopus Indexed Journal).

24. S. Baskar, V.Vijayan, S. Saravanan, A.V. Balan & A. Godwin Antony, 2018, “Effect

of Al203, Aluminium Alloy and Fly Ash for Making Engine Component” International

Journal of Mechanical Engineering and Technology, Vol. 9, no 12, pp. 91–96. (Scopus

Indexed Journal).

25. V. Vijayan, A. Parthiban, T. Sathish, S. Siva Chandran & R. Venkatesh, 2018,

“Performance Analysis in End Milling Operation” International Journal of

Mechanical Engineering and Technology, Vol. 9, no 11, pp. 2263–2271. (Scopus Indexed

Journal).

26. B.Radhakrishnan, V.Vijayan, G.Senthilkumar, 2018, “Performance Analysis of

Surface Roughness modeling using Soft Computing Approaches” Applied

Mathematics and information Science, Vol. 12, no.6, pp 1209-1217. (Scopus

Indexed Journal).

27. K. Pradeep Mohan Kumar, V. Vijayan, B. Suresh Kumar, C. M. Vivek, S.

Dinesh, 2018, “Computational Analysis and Optimization of Spiral Plate Heat

Exchanger” Journal of applied Fluid Mechanics, Vol. 11, special Issue, pp 121-

128. (SCIE Indexed Journal).

28. T. Avudaiappan, V. Vijayan, S. Sundara Pandiyan, M. Saravanan, S. Dinesh

“Potential Flow Simulation through Lagrangian Interpolation Meshless Method

Coding” Journal of applied Fluid Mechanics, Vol. 11, special Issue, pp 129-134.

(SCIE Indexed Journal).

29. S.Dinesh, M.Prabhakaran, A.Godwin Antony, K.Rajaguru & V.Vijayan 2017,

“Investigation and Optimization of Machining Parameters in Processing AISI

4340 Alloy Steel with Electric Discharge Machining, International Journal of

Pure and Applied Mathematics, vol.117, no.16, pp.385-391 (Scopus Indexed

Journal)

30. A.M.Rameshbabu, P.Parameshwaran, V.Vijayan, R.Panner, 2017, Diffraction,

microstructure and thermal stability analysis in a double phase nanocrystalline

Al20Mg20Ni20Cr20Ti20 high entropy alloy, Journal of Mechanical behavior

and materials , vol.26, Issue 3-4, pp.127-132 (Scopus Indexed Journal).

31. R.Srinivasan, V.Vijayan, K.Sridhar, 2017, Computational Fluid Dynamic

Analysis of Missile with Grid Fins, Journal of applied Fluid Mechanics, vol.10,

Special Issue, pp.33-39 (SCIE Indexed Journal).

32. A.Godwin Antony, S.Aravind, S.Dinesh, K.Rajaguru & V.Vijayan 2017,

“Analysis and Optimization of Performance Parameters in Computerized I.C.

Engine Using Diesel Blended with Linseed Oil and Leishmaan's Solution,

Mechanics and Mechanical Engineering, vol.21, no.2, pp.193-205 (Scopus

Indexed Impact factor: 0.11)

33. S.Dinesh, A.Godwin Antony, K.Rajaguru & V.Vijayan 2017, “Experimental

Investigation and Optimization of Material Removal Rate and Surface

Roughness in Centerless Grinding of Magnesium Alloy Using Grey Relational

Analysis, Mechanics and Mechanical Engineering, vol.21, no.1, pp.17-28

(Scopus Indexed Impact factor: 0.11)

34. B.Suresh Kumar, V.Vijayan, N. Baskar, 2016, Comparison of coated and

uncoated carbide drill bits for drilling titanium grade 2 material, Mechanika,

vol.22, no.6, pp.571-575(SCIE Indexed Journal).

35. B.Suresh Kumar, V.Vijayan, N. Baskar, 2016, Burr Dimension Analysis on

Various Materials for Convenantionally and CNC Drilled Holes, Mechanics

and Mechanical Engineering, vol.20, no.3, pp.347-354. (Scopus Indexed

Impact factor: 0.11)

36. R.Venkatesh, V.Vijayan, 2016, Performance Evaluation of Multipurpose Solar

Heating System, Mechanics and Mechanical Engineering, vol.20, no.4, pp.359-

370(Scopus Indexed Impact factor: 0.11)

37. Rajkumar T., Karuppusamy S., Vijayan V., 2016, Testing of Mechanical

Properties of Hybrid Fiber Reinforced Composites, Asian Journal of Research

in Social Sciences and Humanities, Vol. 6, No. 10, pp 213- 225.

38. Karuppusamy S., Karthikeyan G., Dinesh S., Rajkumar T., Dr. Vijayan V., Bas

ha J. Kalil, 2016, Design and Analysis of Automotive Wheel Rim by using

ANSYS and MSC Fatigue Software, Asian Journal of Research in Social

Sciences and Humanities, Vol. 6, No. 10, pp 196- 212.

39. Dinesh S, Antony A Godwin, Karuppusamy S, Kumar B Suresh, Vijayan V,

2016, Experimental Investigation and Optimization of Machining Parameters in

CNC Turning Operation of Duplex Stainless Steel, Asian Journal of Research in

Social Sciences and Humanities, Vol. 6, No. 10, pp 179- 195.

40. S. Dinesh, A. Godwin Antony, K. Rajaguru, Dr.V.Vijayan, 2016, Investigation

and Prediction of Material Removal Rate and Surface Roughness in CNC

Turning of En24 Alloy Steel, , Mechanics and Mechanical Engineering, vol.20, no.4, pp.451-466. (Scopus Indexed Impact factor: 0.11)

41. B. Suresh Kumar, V. Vijayan, N. Baskar, 2014, ‘ Optimization of Drilling

Process Parameters for Material Removal Rate and Surface Roughness on

Titanium Alloy using Response Surface Methodology and Fire Fly Algorithm’,

Asian Journal of Research in Social Sciences and Humanities,, Vol. 6, No. 5,

May 2016, pp.1251-1267.

42. Vijayan, V, & Karthikeyan, T, 2014, ‘Passive Vibration Isolation by

Compliant Mechanism Using Topology Optimization with Building Blocks’,

Research Journal of Applied Sciences, Engineering and Technology,vol.8,

no.13, pp.1522-1530. (Impact factor: 0.16) (Scopus Indexed Impact factor:

0.11)

43. Vijayan, V, Karthikeyan, T, Udayakumar, M & Chellamuthu, K 2014,

‘Passive Vibration Isolation by Compliant Mechanism using Topology

Optimization’, International Journal of Acoustics and Vibration,

vol.19, no.4, pp.269-275. (SCIE Indexed Journal).

44. Vijayan, V & Karthikeyan, T 2014, ‘Material selection of Compliant

Mechanism for Vibration Isolation’, Mechanics and Mechanical Engineering,

vol.18, no.2, pp.121-134. (Scopus Indexed Impact factor: 0.11)

45. Vijayan, V & Karthikeyan, T 2013, ‘Design of Compliant Mechanism for

Vibration Isolation using Topology Optimization and Flexible Building Blocks’,

Journal of Engineering and Technology,vol.3, no.1, pp. 46-51.

DOI:10.4103/0976-8580.107101.

46. Rajesh R, Vijayan, V & Karthikeyan, T 2013, ‘Topology Optimization and

Flexible Building Block Design and Analysis of Compliant Mechanism for

Vibration Isolation’, International Journal of Scientific & Engineering Research,

Volume 4, Issue 8.

47. Vijayan, V & Karthikeyan, T 2012, ‘Comparison of Numerical data of

Compliant Actuator with FEA Technique’, European Journal of Scientific

Research, vol.76, no.1, pp.74-82. (Scopus Indexed Journal).

48. Vijayan, V & Karthikeyan, T 2009, ‘Design and Analysis of Compliant

Mechanism for Active Vibration Isolation using FEA Technique’, International

Journal of Recent Trends in Engineering, vol.1, no.5, pp.77-81.

PAPER PUBLICATION AND PRESENTED DETAILS

1. Published the paper titled “A Study and Analysis of complaint mechanism for

Active Vibration Isolation using FEA Technique” in International Conference

on Fascinating Advancement in Mechanical Engineering organized by Mepco

Engineering College at Sivkasi on 11-13 December 2008. (FAME 2008).

2. Published the paper titled “Active Vibration Isolation using complaint

mechanism” in International Conference organized by universiti Malaysia Perlis

at Malaysia on 25-26 October 2007. (CADM 2007).

3. Presented the paper titled “Analysis of Complaint Actuator for Active Vibration

Isolation” in International Conference organized by Sethu institute Technology

at Madurai on 9-11 August 2007. (ICADM 2007).

4. Presented the paper titled “Design of Complaint Actuator for Active Vibration

Isolation” in National Conference organized by Birla Institute of Technology at

Bilani on 17-18 February 2006. (DPLC 2006).

5. Presented the paper titled “Design of Complaint Actuator for Active Vibration

Isolation” in National Conference organized by St.joseph Engineering College

at Chennai on 02 February 2006. (TECM 2006).

1. Maejo International Journal of Science and Technology (MIJST) – SCIE indexed

2. International Journal of Mechanical And Production Engineering Research And

Development (IJMPERD) – Scopus indexed

3. International Journal of Rapid Manufacturing – Inderscience Publisher

4. SN Applied Science – Springer Publisher

1. Journal of Applied fluid mechanics (SCIE Indexed)

http://jafmonline.net/web/guest/home?p_p_id=JournalArchive_WAR_JournalArchive_INSTA

NCE_nvhn&p_p_action=0&p_p_state=maximized&p_p_mode=view&_JournalArchiv

e_WAR_JournalArchive_INSTANCE_nvhn_form_page=main_form&selectedVolume

Id=73&selectedIssueId=244 2. International Journal of Rapid Manufacturing – Inderscience Publisher

http://www.inderscience.com/info/ingeneral/forthcoming.php?jcode=ijrapidm

3. SN Applied Science – Springer Publisher

https://www.springer.com/engineering/journal/42452?detailsPage=societies

4. Computer Modeling in Engineering & Sciences – SCI Indexed - Innovations and

current trends in Nanomaterials for soft computing and energy applications.

EDITORIAL MEMBER

GUEST EDITOR DETAILS FOR SPECIAL ISSUE

REVIEWER DETAILS

1. International Journal of Manufacturing, Materials, and Mechanical Engineering

(IJMMME)

2. Progress in Industrial Ecology, An International Journal (PIE)

3. International Journal of Computer Aided Engineering and Technology. (IJCAET)

4. International Journal of Manufacturing Technology and Management. (IJMTM)

5. International Journal of Additive and Subtractive Materials Manufacturing.

(IJASMM)

6. International Journal of Engineering Research & Technology (IJERT)

7. International Journal of Rapid Manufacturing .(IJRAPIDM)

1. Indian Society for Technical Education (ISTE)

2. International association of Engineers.(IAENG: 174480)

3. International Society for Research and Development.(ISRD)

Sl.no Name of the Candidates Title

1. Yokeshwaran R Comprehensive analysis of tungsten inert

gas welding parameters for surface

modification.

2. Radha Krishnan B Surface Roughness modeling for machine

vision system.

1. Convener for the International Conference on Newer Engineering Concepts and

Technology (iConnect2K18) dated: 23.03.2018 & 24.03.2018.

2. Convener for the International Conference on Newer Engineering Concepts and

Technology (iConnect2K17) dated: 28.03.2017 & 29.03.2017.

Membership

LIST OF RESEARCH PROJECTS GUIDED / GUIDING FOR PhD:

Program Organized

3. Convener for the National Conference ATME’16 dated: 02.03.2016

4. Convener for the National Level Technical Symposium dated: 09.09.2016

5. Workshop on Piping by ISS CAD date: 30.09.2016

6. Workshop on NDT by ISS CAD date: 29.09.2016

7. Workshop on TIG and MIG Welding by Dr.P.Sathya, Associate Proff.NIT

Trichy date: 14.09.2016

8. Workshop on 3D Printing Technology by Dr.Vinod, NIT Trichy date:

14.09.2016

9. Workshop on 3D Printing Technology by Engineering Solution, Erode dated:

22.03.2016 and 23.03.2016

10. Convener for the National Conference ATME’15 dated: 10.03.2015

11. Convener for the National Level Technical Symposium dated: 15.09.2015

12. Workshop on Quadcopter by Wingfotech dated: 17.03.2016 and 18.03.2016

13. Workshop on CNC by Prim CNC Institute dated: 14.03.2016

14. Workshop on NDT by Dr.P.Ramanathan-Ex Dept.Manager BHEL ISS CAD

date: 16.09.2015

15. Workshop on NDT by Dr.P.Ramanathan-Ex Dept.Manager BHEL ISS CAD

date: 10.09.2015

1. Vijayan. V, Dinesh. S, K.Radhakrishnan, 2018, Unconventional Machining

Process, Maruthi Publishers, Chennai, India

2. Anbarasan. M, Senthilkumar. N, Vijayan. V and Dinesh. S, 2018,

Manufacturing Technology – II, Maruthi Publishers, Chennai, India

3. Anbarasan. M, Senthilkumar. N, Vijayan. V and Dinesh. S., 2018,

Manufacturing Technology – I, Maruthi Publishers., Chennai, India.

4. Vijayan.V and Ramakrishnan.H, 2014. Total Quality Management. Scand

Publication, New Delhi. India.

5. Vijayan V, Prabhakaran M and Vaisnavi R,. 2012. Basic Civil and Mechanical

Engineering. Scand Publication, New Delhi. India.

6. Vijayan V and Venkatesh R., Engineering Graphics, 2011. Maruthi Publishers.,

Chennai, India.

Attended 3 days Training program on “Academic Leadership” at VIT, Vellore, dated

04.05.2017 to 06.05.2017.

Book Publication

SEMINARS AND WORKSHOP ATTENDED DETAILS

Attended a One day Workshop on “Recent Trends in AWJM” at Madras Institute of

Technology, Chennai on Feb 19, 2016.

Attended a One day National Workshop on “Statistical Tools and Strategies for

Research Scholars” at Sona College of Technology, Salem on 26.06.2009.

Attended “Two day CSIR Sponsored National Seminar on AUTO-TELEMATICS

organized by K.S.Rangasamy College of Technology, Tiruchengode on 10 & 11

October 2008.

Attended “One Day Orientation Programme for Engineering Graphics Subject

organised by Anna University Coimbatore held at Krishna Engineering College,

Coimbatore on 13 September 2008.

Attended “Six Days AICTE Sponsored Summer School On e-Content

Development and Delivery Programme organised by NIIIIR held at

M.Kumarasamy College of Engineering, Karur on 30.06.08 to 5.07.08.

Attended “One Day Orientation Programme for NSS Programme Officers”

organised by Anna University at Coimbatore on January 2008.

Attended “one Day Seminar on Technologies for Rural Development and NSS

Exhibition” organised by MAMCE at Trichy on 17 March 2007.

Attended “Two Day AICTE Sponsored National Seminar on AUTO-MEMS”

organised by Kongu Engg College at Perundurai on 19-20 January 2007.

Attended “One Day Orientation Programme for NSS Programme Officers”

organised by Anna University at Chennai on 11 August 2006.

PROJECT DETAILS

Title : Design OF Complaint Actuator for Active Vibration Isolation

Academic: Final year M.E. Project

Objective: To reduce the amplitude of vibration by using Complaint Mechanism.

Title : Design of integral spindle unit for CNC lathe

Academic: Final year B.E. Project

Objective: To directly mount the stator and rotor on spindle housing itself.

SOFTWARE KNOWLEDGE

AUTO CAD 2016

CREO 3.0

Solidworks 2016

Ansys 15.0

PERSONAL DETAILS

Name : Dr.V.VIJAYAN

Date of Birth : 10.06.1981

Marital Status : Married

Languages Known : English, Tamil

Residential Address : V.Vijayan

S/o A.Venkatraman

Kuppurepatti- Post,

Lalapet- Via,

Krishnarayapuram-Taluk,

Karur- District.

E-Mail : ashok.ct555@gmail.com

Mobile : +91900 3971 300.

Place :

Date : (V.Vijayan)