Embed Size (px)
Citation preview
Page 1/28
1. Educational Background 2002 – 2006 University of Sheffield, United Kingdom. PhD in Mechanical Engineering Manufacture of An Aerospace Part: An intelligent cutting tool path strategy
(Areas of interest: High Speed Machining, Optimisation, CAD/CAM, Finite Element Analysis, Internal Combustion Engine and Machining of Composite Material)
2000 – 2001 Univeristi Putra Malaysia Master of Science (Manufacturing System Engineering) Design, Analysis and Fabrication of Plastic Injection Mould for Tensile Test Specimen
1997-1998 University of Northumbria at Newcastle Degree in Manufacturing System Engineering (Hons) 1992 - 1996 Sultan Zainal Abidin Islamic College Diploma in Industrial Technology (3.78/4.0) 2. Professional Qualification 2013 : Professional Engineer (PEng), Board of Engineers, Malaysia (C116122) 3. Teaching and Supervision
a. Teaching Courses
Code Course Name Institution
KKK 3004 Engineering Statistic UPM
KMP 3005 Tool Engineering UPM
EMM 3106 Engineering Drawing UPM
KMP 3403 Composite Material Technology UPM
EMM 3590 Engineering Drawing and Geomatric Modelling UPM
KMP 3803 Manufacturing Automation 2 UPM
EMM 4208 Internal Combustion Engine UPM
PROFESSOR IR. DR. MOHD KHAIROL ANUAR BIN MOHD ARIFFIN, PEng (16122), MIEM (49267), MySET, ASME (9054008) Department of Mechanical and Manufacturing Engineering Faculty of Engineering Universiti Putra Malaysia (UPM) 43400 UPM Serdang, Selangor, MALAYSIA Tel: 603- 89466336 Fax: 603- 86567122 Mob:6017-3019132 email: [email protected] or [email protected] website:http://www.eng.upm.edu.my Scopus: https://www.scopus.com/authid/detail.url?authorId=26530839200 H-Index:9 Google Scholar: http://scholar.google.com/citations?user=qTspvgIAAAAJ&hl=en H-Index : 13
Page 2/28
ECC 3191 Computer Programming and Application UPM
KAA 4202 Innovation Studies 2 UPM
KMP 5001/
EMM5708
Advance Manufacturing Technology and
Processes
UPM
KMP 5901 Automation, Robotic and CAM UPM
KMP 5902 CAD/CAM Practices UPM
EMM 5708 Automation and Robotic UPM
KMP 5910 /
EMM5618
Manufacturing Project Management UPM
EMM5602 Total Quality Management UPM
BEA 102 Automotive Power Unit 1 KLIUC
DST 1172 Robust Industrial Design GMI
b. Supervision of Students
Level
Graduated / Completed On-going
Chairman/ Supervisor
Committee/ Co-Supervisor
Chairman/ Supervisor
Committee/ Co-Supervisor
PhD 11 15 11 14
MSc 7 14 1 7
BEng 22 - - -
PhD Completed (Supervisor) No. Name Thesis Title
Year
Graduated
1. Nurhaniza binti
mohamad (GS32228)
Parameter optimization for machining of carbon fiber –
aluminum laminates
2016
2. Shahla paslar (GS31529) Development of hybrid dynamic scheduling model for
flexible manufacturing system
2016
3. Aidin Delgoshaei
(GS33677)
Design of comprehensive decision-making models for
evaluating and declining impacts of cost-uncertainty
through financial crisis in cellular manufacturing
systems
2016
4. Mohamed Serdah M
(GS37298)
Variable Valve Timing Optimization by Using
Electromagnetic Solenoid in the Engine
2016
5. Seyed Hamidreza
Sadeghian (GS29051)
A dynamic dispatching method for automated lifting
vehicles in automated port container terminals
2015
6. Umar Ali Umar
(GS28336)
Development of a hybrid multi-objective genetic
algorithms for integrated conflict-free automated
guided vehicle (agv) dynamic routing in manufacturing
environment
2015
7. Mohd Uzair bin Mohd
Rosli (GS30204)
Development of value added engineering concept
generation for automotive parts
2015
8. Seyed Mojtaba
Zabihinpourjahromi
(GS31076)
Developing of fuzzy control charts for manufacturing
process control in case of uncertain and vague
observations
2015
9. Tuqa Abdul Razzaq
Flayyih
Investigation of heat transfer enhancement in capillary
tube by using nanofluids
2015
10. Reza Shahrjerdi
(GS24447)
Seller-buyer models of supply chain with game theory
approach
2014
11. Muhammad Yusuf
(GS22333)
Cutting parameter optimization for aluminium LM6
composite using design of experiment method
2013
Page 3/28
PhD Completed (Co-Supervisor) No. Name Thesis Title
Year
Graduated
1. Zahra Firoozi (GS31778) Development Of Integrated Models For Distribution
Network Design Of Perishable Products
2015
2. Abdolhossein Sadrnia
(GS28654)
Development Of A Multi-Objective Optimization
Model For Transport And Environment In A Closed-
Loop Automotive Supply Chain
2014
3. Ang Chun Kit
(GS27283)
Development Of An Artificial Neural Network
Topology For Generating The Motion Of Robotic
Manipulator
2014
4. Seyed Jafar Golestaneh
(GS21664)
Development Of Committee Machine Models For
Multiple Response Optimization Problems
2014
5. Nanang Fatchurrohman
(GS26836)
Manufacturing Process And Material Selection Using
Modified Multi Criteria Decision Making For Brake
Disc
2014
6. Azhar Abdullah
(GS19228),
Tail Sand properties and characteristics 2013
7. Weria Khaksar
(GS22153)
A new hybrid model for robot motion planning 2013
8. M. Sayuti Mechanical properties of metal matrix composite LM6
reinforced titanium
2012
9. Maryam Hamedi
(GS21328)
Development of capability-based virtual cellular
manufacturing systems in dual-resource constrained
settings over semi-distributed layouts
2012
10. Seyed Mahdi
Homayouni (GS21219)
Development of new agent mediated customer
knowledge maangement model
2012
11. Shahram Ariafar Facility layout problem in cellular manufacturing
system
2012
12. Taufik (GS22022) Design and analysis of production tool for metal matrix
composite by investment casting
2012
13. Hossien Nouri
(GS23731)
Development of genetic algorithm and neural network
on cell formation considering real life production
factors in CMS
2011
14. Mohamed A.
Abdulmawla (GS16483)
Optimization of closed die forging process 2010
PhD Progress (Supervisor)
No. Name of Students and
Title of Thesis/Project
Thesis Title
Year Graduated
1. Andy-Al-Affendi bin
Abdullah (GS33506)
Development of Visualized Earned Value Analysis in
Product development projects (Deng)
Expected
2016
2. Aidin Delgoshaei
(GS33677)
Design of comprehensive decision-making models for
evaluating and declining impacts of cost-uncertainty
through financial crisis in cellular manufacturing
systems
Expected
2015 (Thesis
Preparation)
3. Rosdi bin Mohammad
(GS35809) Investigation and Optimization of Tool Design for Free
Cutting Steel (AISI 12L14) in Turning Process.
Expected
2016
4. Mohamed Serdah M
(GS37298)
Variable Valve Timing Optimization by Using
Electromagnetic Solenoid in the Engine
Expected
2016
5. Abdul Azim Abd.
Rahman (GS38278)
Global Product Engineering: New Practice &
Implementation (Deng)
Expected
2017
PhD Progress (Co-Supervisor)
No. Name of Students and
Title of Thesis/Project
Thesis Title
Year Graduated
1. Seyed Jafar Golestaneh
(GS21664)
Investigation the application of fuzzy neural networks
and evolutionary algorithm in maitenance management
Expected
2013
Page 4/28
systems
2. Abdul Rahim Omar The effect of ultraviolet radiation from shielded metal
arc welding process
Expected
2015
3. Abu Hanifah Haji
Abdullah
Aircraft Structural Crashworthiness Expected
2015
Page 5/28
Master Completed (Supervisor)
No. Name Thesis Title
Year
Graduated
1. Nurhaiza binti Shahrir
(GS29439)
Development of predictive maintenance by using
condition monitoring for POCL3 diffusion and Sinx
Deposition of A solar Cell manufacturing equipment
2013
2. Zulfaisal Bin Mohamed
(GS19111),
Finite element analysis on corrosion defect to
determining the remaining life of pipelines
2012
3. Hazem K. Al-Sultaney
(GS20340),
A tool path cutting strategy for macro and micro
milling
2011
4. Nurhaniza Bt Mohamad
(GS20854),
Cutting tool path optimization using evolutionary
algorithm
2011
5. Alireza Noroziroshan
(GS18517),
Development of genetic algorithm procedure for
sequencing problem in mixed-model assembly lines
2010
6. Masood Fathi GS21834) A multi-objective simulated annealing based on a new
developed heuristic to solve u- shape assembly line
balancing problem
2010
7. t
i
Ehsaanreza Bagherian
(GS 19723),
Development of a ceramic foam filter for filtering
molten aluminium alloy in casting processes
2009
Master Completed (Co-Supervisor)
No. Name Thesis Title
Year
Graduated
1. Abolfazl Golshan
(GS33160)
Optimization Of Micro-End Milling Process
Parameters Of Titanium Alloy Using Non-Dominated
Sorting Genetic Algorithm
2014
2. Firouz Fadaeifard
(GS32757)
Effects Of Friction Stir Welding On The Morphology
And Mechanical Properties Of Aa6061-T6 Aluminum
Alloy Lap Joint
2014
3. Elham Falatoonitoosi
(GS29067)
Development Of Evaluation Model To Improve Green
Supply Chain Management By Applying Dematel
Technique
2013
4. Altayyeb Abdullah
(GS29862)
Heat Transfer And Nanofluid Flow Characteristics In
Microchannel Heat Sink With Different Shapes
2013
5. Zahra firoozi (GS23825) A facility location model in supply chain management 2011
6. Suraya Sulaiman
(GS22223)
Analysis of flow and solidification of aluminium alloys
and composite material using anycasting software
2010
7. Syazwan bin Abdul
Samad (GS23378)
Fatigue Life Simulation of Rubber of Automotive
Components
2010
8. Nanang Fatchurrohman
(GS 19360),
Solidification analysis of metal matrix composites
aluminium 11.8% silicon alloy reinforced with
titanium carbide particulates
2009
9. Seyed Sharafaldin
Hosseini (GS18185),
New method of measure thermal conductivity of
nanofluids
2009
10. Mostafa Badakshian
(GS18160),
Optimization of simultaneous scheduling for machines
and automated guided vehicles using fuzzy genetic
algorithm
2008
Master Progress (Supervisor)
No. Name Thesis Title
Year
Graduated
1. Khairol Taufiq Saidin
(GS35938)
Multivariate Finite Element Analysis For Structural
Reliability Assessment Of Hp/Ht Subsea Pipeline
Subject To Lateral Buckling
2015
Page 6/28
Master Complete (Supervisor – Without thesis)
No. Name Thesis Title
Year
Graduated
1. Sulaiman Kamari
(Gs21429)
Relation Between Operation And Maintenance Of
Water Cooled Chiller Air Conditioning System To
Failure Mode And Effect
2010
2. Murugan A/L Appavoo
(Gs19216)
Improvement Of The Automation System For
Industrial Application
2010
3. Navid Moravej
(Gs23089)
Project Management - Comparison Between 3
Methods Of Implemented Project
2010
4. Mohd Zaidy Bin
Mohammad Nasir
(Gs23395)
Design And Analysis Plastic Injection Moulding For
Soap Container
2010
5. Goey Ewing (Gs23347)
New Product Development (Automotive Parts)
According To ISO/TS16949
2010
6. Julyhastuti Binti
Nurhemdi (GS23095)
Authentication, Authorization & Accounting
Systemfor Network Elements - Project Management;
2010
7. Sivaneswari A/P Sami-
Iyah (GS22446)
Evaluation On Ppm For Primary Process Equipment In
Sewage Treatment Plant Indah Water Konsortium
(IWK)
2010
8. Ali Kasaei (GS22484) Internal Combustion Engine (ICE) & Emission Control 2010
9. Seyed Mohammad Amin
Okhovat (GS25075)
Lean Manufacturing 2010
10. Rohaya Binti
Kamaluddin (GS23027)
Analsysis Of Automated G-Clip Machine Processes
And Additional Substation Process With Simulation
By Using CAD Software.
2010
11. Shahinsha Bin
Telappurath Mahamood
(GS23328)
Creating A User Interface Program That Enables Easy
Integration Of Different Brand Of Plcs
2010
12. Mohd Uzair Bin Mohd
Rosli (GS25119)
Improvement of Injection Moulding Parameters 2010
13. Ong Chee Shen
(GS25276)
The Parameter Study And Optimization Of Rotary
Draw Tube Bending Using Finite Element Analysis;
2010
14. Leila Bakhtiaryfard
(GS20569)
Design Improvement Of Critical Joint In A Fiberglass
Vessel: A Case Study
2009
15. Taufik Bin Mohamed
Supri (Gs20123),
Finite Element Analysis For Sheet Metal Forming –
Springback On Automotive Component
2009
16. Mohd Shahfizal Bin
Mohd Ruslan (Gs),
Application Of Finite Element Analysis For Sheet
Metal Formability Effect On Automotive Part
2009
17. Isnuraini Binti
Kassim@Ismail
(GS18817)
Comparison In Designing Using Different CAD
SOFTWARE
2008
18. Siti Norhafiza Binti
Abdul Razak (GS 19209)
Effectiveness Of TQM Implementation In
Manufacturing Industry
2008
19. Mohd Hassan Hafiz
Mamat
Parameter Setting And Tuning For Injection Molding
Process
2008
20. Mohd Fadrizal Paimin
(GS22330)
Developing Standard Operating Procedure For
Producing Premium Quality (PQ) Oil In Palm Oil Mill
2008
Page 7/28
Bachelor Complete (Supervisor)
No. Name Thesis Title
Year
Graduated
1. Nur Amalina binti
Sabuan 15807
Design and analysis of automation feeder system for
biocompose material
2014
2. Tan Yee Lee 151651 Design of an automatic gearing system using potential
energy technique
2013
3. Ahmad Nor bin Samson
155472
Parameters optimization of the friction stir welding
using finite element analysis method
2013
4. Adibah Abdullah 145935 Optimization of cutting parameters using system
dynamics approach
2012
5. Azimah Hanum 148862 A study on Cam shaft engine design 2012
6. Rabiatul Adawiyah
Abdul Mutalib 150316
Design and analysis of stident racing car based on
formula SAE 2011
2012
7. Zaihasrin Zakaria
142660
Minimization of the manufacturing cost by redesigning
of the existing product in the market
2011
8. Ahmad Amri Mohmed
Sepri 140496
Validation of thermal stress analysis of the pipe using
FEA and experimental work
2011
9. Nasrullah bin Mohd Taib
135885
Design and Optimize master cyclinder hydraulic brake
using finite element analysis
2010
10. Nor Aidilatira binti
Mohd Tarmudi 140046
Design, analysis and modeling of small engine for the
remote control vehicles
2010
11. Nik Mohamad Idham bin
Nik Hassan 135631
Analysis and simulation of MPV dashboard using
solidworks and Abaqus softwares
2010
12. Farid Nazmi bin
Dzulkurnain 135884
Design and Fabrication of An Autonomous mobile
robot
2010
13. Wong Chun Wei 122008 Simulation of hot rolling process using finite element
analysis (Abaqus)
2008
14. Ng Lean Foong 123767 Solving drilling tool travel distance by using genetic
algorithm and traveling salesman problem optimization
technique
2008
15. Gui Joo Lee 130848 Cans drop test experimental and simulation work 2008
16. Tan Yong Woi 130286 Design and modeling of inlet guide vanes in aero
engines using smart materials
2008
17. Mohd Budwani Abidin
122261
Design and modeling of external rubbish compactor
parts
2007
18. Rusyaidi Abu Bakar
125481
Design and Modeling of rubbish compactor part II 2007
19. Mohd Firdaus Abdullah
126988
Design and modeling of multipurpose fire extinguisher
(Part 1)
2007
20. Mohd Mohsein Ibrahim
122130
Design and Modeling of Multipurpose fire extinguisher
(part 2)
2007
Page 8/28
4. Research, Consultancy and Publication
a. Grant
Total Accumulated Funding: RM1,905,278
No Duration Title Funding Amount(RM) Designation
1 2016-2018
Design of a comprehensive method
for evaluation and reducing risk
factors before and during
implementing of execution of
projects
Internation research with university (IRU) PIPPT Kuwait
360,000 PI
2 2016-2018
Experimental investigation on
micro-milling of silicon wafers for
microfluidic devices in medical
industries
International and Industry Grant – AUN/SEED-NET- JICA with Industry in Malaysia (CRI)
45,240 (USD – Jica) – 180,960 9,048(USD – Malaysia industry) – 36,192
Co
3 2015-2017
Development and analysis of
extrusion head of fused deposition
modeling (FDM) for biomedical
materials
FRGS 110,000 PI
4 2015-2017
Optimization of tool geometry for
free cutting steel
(SUM24L/AISI12L14) in turning
process
International and Industry Grant – AUN/SEED-NET- JICA with Industry in Malaysia (CRI)
44,122 (USD – Jica) – 167,663.00 8,000 (USD – Malaysia industry) – 30,400
PI
5 2014-2015
Triz Model for House Energy
Saving (Completed) RUGS 32,000 Co - Mentor
6 2014-2016
Agriculture Sector Model: A System
Dynamics Methodology FRGS - Economics 80,000 Co
7 2014-2016
Cutting Parameter Optimization of
Hybrid Micro-rotary Wire Electrical
Discharge for Surgical Device
Fabrication
FRGS – With UTEM 105,000 Co
8 2014-2016
Parameters Optimization For
Machining CFRP-Aluminum
Composite Laminates (Completed)
Science Fund (MOSTI)
151,000 PI
9 2013-2016
Up-scaling of Multistrain Bacterial
Inoculums Carrier for EFB Compost
Biofertilizer Production
(Completed)
PRGS – Faculty of Agriculture
375,000 Co
10 2013 - 2015
Characterization And Development
Of A Natural Fibre Reinforced
Unsaturated Polyester Based
Injection Moulding Composite
Material For Electrical Insulation
Application (Completed)
FRGS 90,500 Co
11 2012-2014
Development of an integrated Value
Added Engineering methodology for
Automotive Parts (Completed)
FRGS 68,000 PI
12 2010-2012
Development of a virtual cellular
manufacturing system algorithm in
dual-resource constrain (Completed)
FRGS 52,000 Co
Page 9/28
13 2010-2012
Development of a Novel Evolutionary
Algorithms for AGV Dynamic Routing
In FMS Environment (Completed)
RUGS 55,000 PI
14 2009-2011
Value Engineering link-up with
university program Proton saga
(Completed)
PROTON 30,298 PI
15 2009-2011
Value Engineering link-up with
university program Proton exora
(Completed)
PROTON 34,265 Co
16 2007-2009
Development of Combinatorial
Optimisation for Cutting tool path
strategy (Completed)
RUGS 70,000 PI
17 2007-2009
Cutting Tool Path Optimisation Using
Evolutionary Algorithm (Completed) FRGS 100,000 PI
18 2007-2008
Simulation of Cutting Tool Path
Strategy for Thin Walled Section
Part (Completed)
NLSG (UPM) 10,000 PI
19 2007-2009
Model Based Structural Health
Monitoring (SHM) for Ageing
Aircraft and Real Engineering
Structural Components using Finite
Element Analysis and Optimisation
Technique (Completed)
RUGS 44,000 C0
20 2007-2009
Analysis of flow and solidification
of casting process (Completed) RUGS 83,000 Co
b. Fellowship / Travel Grant
No Duration Title Funding Type Designation
1 20-21 March 2014
2nd Working Group Meeting
AUN SEED NET Travel Grant (10,000.00)
Participants of Meeting
2 11-12 March 2013
1st Working Group Meeting
AUN SEED NET Travel Grant (10,000.00)
Participants of Meeting
3 27-28 May 2013
Field Management Meeting, Mechanical and Manufacturing Engineering
AUN SEED NET Travel Grant (8,000.00)
Participants of Meeting
4 25-26 November 2013
Regional Conference on Mechanical and Manufacturing Engineering 2013
AUN SEED NET Conference Grant (USD 14,000 = RM 49,000.00)
Chairman of Conference
5 2-16 August 2014
Short Research with Japanese Professor (SRJP)
AUN SEED NET Travel Trip and research consultation (20,000)
Reseacher
6 11 October 2014
ASME Meeting (Istanbul Turkey)
ASME Meeting (8,000) Malaysia Representative
7 May 2016 Keynote Speaker- Nano fluids
Islamic Azad University Isfahan, Iran
Keynote Speech (8,000)
Keynote conference
Page 10/28
c. Consultancy
No Duration Title Funding Designation
1 2012-2014
Kuwait (Master of Engineering Program)
Kuwait Program Expert (Teaching Course – Manufacturing Project management, Automation and Robotic and Total Quality Management)
2 2012-2014
Kuantan (Master of Manufacturing System Engineering)
Kuantan Program
Expert (Teaching Courses – Manufacturing Project Management, Advance Manufacturing and Processes and Automation and Robotic)
3 2013 CNC and Tools and Die Technology
German Malaysia Institute
External Verification of the student Project
4 2012 Product Design and Mould Technology
German Malaysia Institute
External Verification of the student Project
5 2011 Product Design and Mould Technology
German Malaysia Institute
External Verification of the student Project
6 2010 Engineering Design Course
UPM Education & Training Sdn. Bhd.
Expert (Teaching Courses)
7 3-6/2009 Analysis of an accelerated
and controlled composting
pilot plant a composter unit
Ecobuilders Sdn.
Bhd Principle/Head of the Consultant
8 3-6/2008 Evaluating stress distribution
on a spherical vessel TRICOL Engineering Sdn. Bhd.
Principle/Head of the Consultant
9 3-9/2007 Bus structure finite element
analysis (BSFEA) Transafe Consulting Engineer
Expert Consultant
d. Patent/ Copyright/ Trademark
No Detail
Registration No Year
1 Variable cam nose Under Filling – waiting for PI number
2016
2 Filament nozzle extruder for ploylactic acid (PLA) material Under Filling – Waiting for PI number
2016
3 Post Conditioned Plastic Material (PA6 + 30% GF) Process Humidifier Machine
PCT/MY2016/050037 and 2015702194
2015
4 Integrated TRIZ and AHP support system for conceptual design Copyright Filling 2015 5 Plastic Made Gasing Top, plastic composite made gasing top,
injection molding PI2012000680 (Malaysia) 2013
6 A Novel High Rate In-vessel Composter PCT/MY2009/000081 2011 7 Ceramic Foam Filter for Aluminium Alloys Filteration Under Filling 2010
Page 11/28
e. Publications
SCOPUS ID: 26530839200
H-index:6
Book/Chapter in Book (Author/Editor)/Technical Report/Guidelines / Policy
1 S.M. Sapuan, F. Mustapha, D.L. Majid, Z. Leman, A.H.M. Ariff, M.K.A. Ariffin, M.Y.M. Zuhri,
M.R. Ishak and J. Sahari, (2011) Composite Science and Technology – 471, Trans Tech Publications
Ltd. Zurich. Switzerland, ISSN 1013-9826
2 S.M. Sapuan, F. Mustapha, D.L. Majid, Z. Leman, A.H.M. Ariff, M.K.A. Ariffin, M.Y.M. Zuhri,
M.R. Ishak and J. Sahari, (2011) Composite Science and Technology – 472, Trans Tech Publications
Ltd. Zurich. Switzerland, ISSN 1013-9826 3 M.K.A Ariffin et al., (2009) Proceeding of The 9th National Symposium on Polymeric Materials,
UPM Press, ISBN 978-967-255-5
4 M.K.A Ariffin, N. D.Sims, and K.Worden, (2004), Genetic optimisation of machine tool paths,
Springer –Verlag, 1-85233-829-6
5 M. Sayuti, S. Sulaiman, T.R. Vijayaram, B.T.H.T Baharudin and M.K.A. Arifin, (2012),
Manufacturing and Properties of Quartz (SiO2) Particulate Reinforced Al-11.8%Si Matrix
Composites, Composites and Their Properties, Intech, 978-953-51-0711-8
6 Seyed Hamidreza Sadeghian, Mohd Khairol Anuar bin Mohd Ariffin, Tang Sai Hong, Napsiah bt
Ismail , (2013), Integrated Scheduling of Quay Cranes and Automated Lifting Vehicles in
Automated Container Terminal with Unlimited Buffer Space, Advances in Systems Science,
Advances in Intelligent Systems and Computing Volume 240, 2014, pp 599-607
Citation Index/Refereed Journals
Journals
1 A Parnianifard, A Azfanizam, M Ariffin, M Ismail, An overview on robust design hybrid metamodeling: Advanced methodology in process optimization under uncertainty, International Journal of Industrial Engineering Computations 9 (1), 1-32, 2018
2 A Golshan, B Baharudin, H Aoyama, M Ariffin, MIS Ismail, AA Ehsan, Ultraprecision Machining of Silicon Wafer by Micromilling Process, Procedia Engineering 184, 192-196, 2017
3 S Sulaiman, Z Marjom, MIS Ismail, MKA Ariffin, N Ashrafi, Effect of Modifier on Mechanical Properties of Aluminium Silicon Carbide (Al-SiC) Composites, Procedia Engineering 184, 773-777, 2017
4 HW Chiam, WH Azmi, NM Adam, M Ariffin, Numerical study of nanofluid heat transfer for different tube geometries–A comprehensive review on performance, International Communications in Heat and Mass Transfer 86, 60-70, 2017
5 S Dehghan, MIS Ismail, MKA Ariffin, B Baharudin, S Sulaiman, Numerical simulation on friction drilling of aluminum alloy, Materialwissenschaft und Werkstofftechnik 48 (3-4), 241-248, 2017
6 A Delgoshaei, MKA Ariffin, A Ali, A multi-period scheduling method for trading-off between skilled-workers allocation and outsource service usage in dynamic CMS, International Journal of Production Research 55 (4), 997-1039, 2017
7 R Darmawan, NM Adam, NA Aziz, MKAM Ariffin, Investigation on alternative methods to enhance the cooling capacity of an open pool reactor, AIP Conference Proceedings 1799 (1), 020012, 2017
8 N Shahrir, NM Adam, MKA Ariffin, Preventive Maintenance Scheduling Sequence for Bottleneck Equipment in a Manufacturing Line, Advanced Engineering Forum 20, 78-87, 2017.
9 NA Sukindar, M Ariffin, MK Anuar, BT Baharudin, CNA Jaafar, MIS Ismail, Comparison on Dimensional Accuracy Using a Newly Developed Nozzle for Open-Source 3D Printer, Applied Mechanics and Materials 859, 15-19, 2017
Page 12/28
10 N. A. Sukindar, M. K. A. Mohd Ariffin, An Analysis on Finding the Optimum Die Angle of Polylactic Acid in Fused Deposition Modelling, Applied Mechanics and Materials, Vol. 835, pp. 254-259, 2016
11 Aidin Delgoshaei, Mohd Khairol Anuar Ariffin, Ahad Ali, A multi-period scheduling method for trading-off between skilled-workers allocation and outsource service usage in dynamic CMS, International Journal of Production Research, Inpress, 11 August 2016
12 Delgoshaei, A., Ali, A., Ariffin, M.K.A., Gomes, C., A multi-period scheduling of dynamic cellular manufacturing systems in the presence of cost uncertainty, Computers and Industrial Engineering (100), pp 110-132, 2016
13 Aidin Delgoshaei, Mohd Khairol Mohd Ariffin, B. T. Hang Tuah Bin Baharudin, Zulkiflle Leman, A new method for decreasing cell-load variation in dynamic cellular manufacturing systems, International Journal of Industrial Engineering Computations, Volume 7 Issue 1 pp. 83-110 , 2016
14 Aidin Delgoshaei, Mohd Khairol Mohd Ariffin, B. T. Hang Tuah Bin Baharudin, Zulkiflle Leman, Minimizing makespan of a resource-constrained scheduling problem: A hybrid greedy and genetic algorithms, International Journal of Industrial Engineering Computations, Volume 6 Issue 4 pp. 503-520 , 2015
15 Umar Ali Umar, M. K. A. Ariffin, N. Ismail, S. H. Tang, Hybrid multiobjective genetic algorithms for integrated dynamic scheduling and routing of jobs and automated-guided vehicle (AGV) in flexible manufacturing systems (FMS) environment, The International Journal of Advanced Manufacturing Technology, jun 2015, pp 1-15, Online IF1.458
16 S. Mojtaba Zabihinpour, M.K.A. Ariffin, S.H. Tang and A.S. Azfanizam, Construction of fuzzy X ̄ − S control charts with an unbiased estimation of standard deviation for a triangular fuzzy random variable, Journal of Intelligent & Fuzzy Systems vol 28, 6 , pp2735-2747
17 Shahla Paslar, M.K.A. Ariffin, Mehran Tamjidy & Tang Sai Hong, Biogeography-based optimisation for flexible manufacturing system scheduling problem, International Journal of Production Research, 30 october 2014, pp1-17, IF1.477, online
18 Aidin Delgoshaei, Mohd Khairol Anuar, B.T. Hang Tuah, Zulkifle Leman, A backward approach for maximizing net present value of multi-mode pre-emptive resource-constrained project scheduling problem with discounted cash flows using simulated annealing algorithm, IJIEM, pp151-158, Vol 5, No 3, 2014
19 Zabihinpour, S.M. ; Ariffin, M.K.A. ; Tang, S.H. ; Azfanizam, A.S. ; Boyer, O. , Fuzzy mean and range control charts for monitoring fuzzy quality characteristics: A case study in food industries using chicken nugget, Industrial Engineering and Engineering Management (IEEM), 2014 IEEE
20 Hani Mizhir Magid, S. Sulaiman, M.K.A. Ariffin and B.T.H.T. Baharudin, Modeling and Simulation of Forward Al Extrusion Process Using FEM, Applied Mechanics and Materials Vol. 564 (2014) pp 525-532
21 H. Togun, T. Abdulrazzaq, S. N. Kazi, A. Badarudin, and M. K. A. Ariffin, Numerical study of turbulent heat transfer in annular pipe with sudden contraction, Applied mechanics and materials, pp. 461-466, 2014.
22 S. Mojtaba Zabihinpour, M. K. A. Ariffin, Tang S. H., A. S. Azfanizam, Fuzzy Based Approach for Monitoring the Mean and Range of the Products Quality, Journal of Applied Environmental and Biological Sciences, 4(9) 1-7, 2014.
23 Mehran Tamjidy, Shahla Paslar, B.T. Hang Tuah Baharudin, Tang Sai Hong & M.K.A. Ariffin, Biogeography based optimisation (BBO) algorithm to minimise non-productive time during hole-making process, International Journal of Production Research, 2014, pp1-15, IF1.477
24 Tang S.H., Shiva Sadat Moosavipu, S. Sulaiman, M.K.A.M. Ariffin and Morteza Ghobakhloo, The impact of information technology investment on supply chain capabilities: A review, Applied Mechanics and Materials Vol. 564 (2014) pp 723-726
25 Zahra Firoozi, N. Ismail, ShahramAriafar, Tang S.H., M.K.A.M.Ariffin and Azizollah Memariani, Cost Analysis of Two Different Configurations for a Distribution Network Design, Applied Mechanics and Materials Vol. 564 (2014) pp 656-660
26 H. Togun, T. Abdulrazzaq, S. N. Kazi, A. Badarudin, M. K. A. Ariffin, M. N. M. Zubir, Numerical Study of Heat Transfer and Laminar Flow over a Backward Facing Step with and without Obstacle International Journal of Mechanical, Industrial Science and Engineering
Page 13/28
Vol:8 No:2, page 2011- 2015, 2014.
27 M.K.A Ariffin, Yee Lee. T and S.B Mohamed, Design Improvement of Automatic Transmission System for Remote Controlled Car, Applied Mechanics and Materials Vol. 564 (2014) pp 25-30
28 H. M. Magid*, S. Sulaiman, M. K. A. M. Ariffin and B. T. H. T. Baharudin, Stress analysis of forward aluminium extrusion process using finite element method, Materials Research Innovations, Vol 18, s2 (1-5), 2014
29 Sai Hong Tang, Chun Kit Ang, Mohd Khairol Anuar Bin Mohd Ariffin and Syamsiah Binti Mashohor, Predicting the Motion of a Robot Manipulator with Unknown Trajectories Based on an Artificial Neural Network, International Journal of Advanced Robotic Systems, pp1-9, 2014
30 M.K.A Ariffin, Hazami B. Che Hussain, S.B. Mohammed and S. Sulaiman, Determining Optimum Electro Discharge Machining Parameters for Drilling of a Small Hole by Utilizing Taguchi Method, Applied Mechanics and Materials Vol. 564 (2014) pp 481-487
31 Muhammad Yusuf, M.K.A. Ariffin, N. Ismail and S. Sulaiman, Effect of Machining Process on Surface Microhardness of Titanium Carbide Reinforced Aluminium LM6 Composite, Applied Mechanics and Materials Vol. 564 (2014) pp 495-500,
32 T. Abdulrazzaq, H. Togun, M. K. A. Ariffin, S. N. Kazi, A. Badarudin, N. M Adam, S. Masuri Heat Transfer and Turbulent Fluid Flow over Vertical Double Forward-Facing Step International Journal of Mechanical, Industrial Science and Engineering Vol:8 No:2, page 2016-220, 2014.
33 Seyed Jafar Golestaneh, N. Ismail, M.K.A. Ariffin, S.H. Tang, Hassan Moslemi Naeini, Ali Asghar Maghsoudi and Zahra Firoozi, Higher Desirability in Solving Multiple Response Optimization Problems with Committee Machine, Applied Mechanics and Materials Vol. 564 (2014) pp 608-613
34 S.H. Sadeghian, M.K.A.M.Ariffin, Tang S.H. and N. Ismail, Integrated Dispatching Model of Automated Lifting Vehicles, Quay Cranes and Yard Cranesat Automated Container Terminal, Applied Mechanics and Materials Vol. 564 (2014) pp 678-683
35 Masha Nur Salsabiela Menhat, M.K.A. Ariffin, S. Sulaiman and Tang S.H., Managing Uncertainty in Supply Chain Management of Vessel Chartering in Oil & Gas Industry, Applied Mechanics and Materials Vol. 564 (2014) pp 694-699
36 Subramaniasarma Sreenivasan, Sameer Adnan Ibraheem, Shamsuddin Sulaiman, B. T. Hang Tuah Baharudin, Mohd K. A. Ariffin and K. Abdan, Evaluation of Combined Treatments Of Natural Fibers: Kenaf, Abaca And Oil Palm Fibers Using Micromechanical and SEM Methods, Advanced Materials Research Vols. 912-914 (2014) pp 1932-1939
37 S. Sulaiman, M. K. A. Ariffin and A. Roshan1, Finite Element Modeling of the Effect of Tool Rake Angle on Cutting Force and Tool Temperature during High Speed Machining of AISI 1045 Steel, Advanced Materials Research Vol. 939 (2014) pp 194-200
38 Shahla Paslar, M.K.A. Ariffin, Mehran Tamjidy, and Tang Sai Hong, Mathematical Programming Models for Flexible Manufacturing System Planning and Scheduling Problem, Applied Mechanics and Materials Vols. 548-549 (2014) pp 1483-1487 (ISI, Refereed)
39 A.A. Alfaryjat, H.A. Mohammed, Nor Mariah Adam, M.K.A. Ariffin, M.I. Najafabadi, Influence of geometrical parameters of hexagonal, circular, and rhombus microchannel heat sinks on the thermohydraulic characteristics, International Communications in Heat and Mass Transfer, Volume 52, March 2014, Pages 121-131 (ISI, Refereed, IF 2.2, Q1)
40 M.K.A. Ariffin, R. Kamaluddin, SH Tang, S.B. Mohammed, “Analysis of Automated G-Clip Machine Processes and Substation Process with Simulation by Using CAD Software”, Materials Science Forum 773, pp. 28-36, 2014. (ISI, Refereed)
41 M Yusuf, M.K.A. Ariffin, N Ismail, S Sulaiman, “Surface Quality and Chip Formation in Turning of LM6 Aluminium Alloy and Particulate Reinforced Metal Matrix Composite”, Materials Science Forum 773, pp. 894-901, 2014. (ISI, Refereed)
42 M Yusuf, MKA Ariffin, N Ismail, S Sulaiman, “Experimental Investigation on Surface Roughness and Tool Wear in Dry Machining of TiC Reinforced Aluminium LM6 Composite”, Materials Science Forum 773, 339-347, 2014. (ISI, Refereed)
43 M Sayuti, S Sulaiman, B Baharudin, MKA Ariffin, “The Influence of Mechanical Mold
Page 14/28
Vibration on Temperature Distribution and Physical Properties of Al-11.8% Si Matrix Composites”, Materials Science Forum 773, 195-202, 2014. (ISI, Refereed)
44 A Abdullah, S Sulaiman, B Baharudin, MKA Ariffin, N Haliza, “Mechanical Properties of Tin Tailing Sand-Clay Mixture from Batu Gajah, Perak, Malaysia for Making Greensand Casting Mould”, Materials Science Forum 773, 211-217, 2014. (ISI, Refereed)
45 Firouz Fadaeifard, Farhad Gharavi, Khamirul Amin Matori, Abdul Razak Daud, Mohd Khairol Anuar Mohd Ariffin and Mokhtar Awang, “Investigation of Microstructure and Mechanical Properties of Friction Stir Lap Welded AA6061-T6 in Various Welding Speeds”, journal of applied sciences, pp 1-8, 2013. (ISI, Refereed)
46 M. Ghobakhloo, S. H. Tang, N. Zulkifli, and M. K. A. Ariffin, An Integrated Framework of Green Supply Chain Management Implementation, International Journal of Innovation, Management and Technology, Vol. 4, No. 1, pp 86-89 (2013)
47 Abolfazl Golshan, B. T. H.T. Baharudin, Nor Mariah bt. Adam, Mohd Khairol Anuar Mohd Ariffin, Prediction of Transport Energy Demand Using Statistical Modelling, J. Basic Appl. Sci. Res. Vol 3(5): pp 8-12, 2013 (Isi, Refereed)
48 U.A. Umar, M.K.A. Ariffin, N. Ismail and S.H. Tang, “Conflict-Free Automated Guided Vehicles Routing Using Multi-Objective Genetic Algorithm”, Research Journal of Applied Sciences, Engineering and Technology Vol 6(14): pp. 2681-2684, 2013. (ISI, refereed)
49 T. Abdulrazzaq, H. Togun, M.K.A Ariffin, S.N. Kazi, A. Badarudin, Enhancements of Heat Transfer Nanofluid Flow In Circular Pipe With Twisted Tape Inserts: Review, Australian Journal of Basic and Applied Sciences vol. 7 page 97-102, 2013.
50 T. Abdulrazzaq, H. Togun, M. K. AAriffin, S. N. Kazi, NM Adam, S. Masuri, Numerical Simulation on Heat Transfer Enhancement in Channel by Triangular Rib, International Journal of Mechanical, Industrial Science and Engineering Vol:7 No:8, page 139 -143, 2013.
51 Shamsuddin Sulaiman, SH Tang, M.K.A.M Ariffin, A Saleh, “Influence of Pattern Coating Thickness on Porosity and Mechanical Properties of Lost Foam Casting of Al-Si (LM6) Alloy”, Applied Mechanics and Materials, Vol 300, pp. 1281-1284, 2013. (ISI, Refereed)
52 Shahram Ariafar, Napsiah Ismail, Mohd Khairol Anuar Mohd Ariffin, Sai Hong Tang, Zahra Firoozi, “Illustration and Model Verification for an Inter-Cell and Intra-Cell Facility Layout Problem in a Cellular Manufacturing System”, Applied Mechanics and Materials, 263, 1310-1314, 2013 (ISI, Refereed)
53 H. Togun, T. Abdulrazzaq, S. N. Kazi, A. Badarudin, M.K.A Ariffin, A CFD study of turbulent heat transfer and fluid flow through the channel with semicircle rib. IEEE, pp. 291-295. 2013.
54 Seyed Jafar Golestaneh, Napsiah Ismail, Mohd Khairol Anuar M.Ariffin, Say Hong Tang, and Hassan Moslemi Naeini, “Desirability Improvement of Committee Machine to Solve Multiple Response Optimization Problems”, Advances in Artificial Neural Systems, 2013, Hindawi Publication (Refereed)
55 S Sulaiman, M.K.A.M Ariffin, TS Hong, NA Mustafa, Effect of Boric Acid Mixture as Solid Lubricant towards Machining Processes, Advanced Materials Research, Vol 651, 372-377, 2013 (ISI, Refereed)
56 H. Togun, T. Abdulrazzaq, S. N. Kazi, A. Badarudin, and M. K. A. Ariffin, Heat Transfer to Laminar Flow over a Double Backward-Facing Step, International Journal of Mechanical, Industrial Science and Engineering Vol:7 No:8, page 463-468, 2013.
57 Nanang Fatchurrohman, Shamsuddin Sulaiman, SM Sapuan, M.K.A Ariffin, BTHT Baharuddin, “Generic Framework for Conceptual Design Using Concurrent Engineering Strategy. A Case Study: Advanced Material Application Product Development of Metal Matrix Composite Component”, Advanced Materials Research, Vol 626, 99-108, 2013 (ISI, Refereed)
58 N Fatchurrohman, S Sulaiman, SM Sapuan, MKA Ariffin, B Baharuddin, “New Technique for Conceptual Selection of Manufacturing Process and Material, Case Study: Metal Matrix Composite Component”, Advanced Materials Research, Vol 626, 82-86, 2013 (ISI, Refereed)
59 M. U. Rosli, M. K. A. Ariffin, S. M. Sapuan, and S. Sulaiman, “Integrated AHP-TRIZ Innovation Method for Automotive Door Panel Design”, International Journal of Engineering and Technology (IJET), Vol 5 No 3, 3158-3167, 2013
60 M. U. Rosli, M. K. A. Ariffin, S. M. Sapuan, and S. Sulaiman, "Integrating TRIZ and AHP: A MPV_s Utility Compartment Improvement Design Concepts," International Journal of Materials, Mechanics and Manufacturing, vol. 1, no. 1, pp. 32-35, 2013. (Refereed)
Page 15/28
61 Hong, Tang Sai; Kit, Ang Chun; Nia, Danial Nakhaei; Ariffin, Mohd Khairol Anuar Mohd; Khaksar, Weria, Planning for Redundant Manipulator Based on Back-Propagation Neural Network, Advanced Science Letters, Volume 19, Number 11, pp. 3307-3310(4), 2013 (Refereed , IF 1.25)
62 Togun, H., Abdulrazzaq, T., Kazi, S., Kadhum, A., Badarudin, A., Ariffin, M., Sadeghinezhad, E., Numerical Study of Turbulent Heat Transfer in Separated Flow: Review, (2013) International Review of Mechanical Engineering (IREME), 7(2), pp. 337-349.
63 H Nouri, SH Tang, BT Hang Tuah, MKA Ariffin, R Samin, “Metaheuristic Techniques on Cell Formation in Cellular Manufacturing System”, Journal of Automation and Control Engineering, Vol no.1, pp 49-54 2013 (Refereed)
64 Abolfazl Golshan, B. T. H.T. Baharudin*, Nor Mariah bt. Adam, Mohd Khairol Anuar Mohd Ariffin, “Prediction of Transport Energy Demand Using Statistical Modelling”, J. Basic. Appl. Sci. Res., 3(5), pp 8-12, 2013
65 U.A. Umar, M.K.A. Ariffin, N. Ismail, S.H. Tang, “Priority-Based Genetic Algorithm for Conflict-Free Automated Guided Vehicle Routing”, Procedia Engineering, 50, 732-739, 2012 (ISI, Refereed)
66 Taufik Roni Sahroni, Shamsuddin Sulaiman, B. T Hang Tuah Baharudin1, Mohd Khairol Anuar Mohd Ariffin, Hambali Arep@Ariff, “Design and Simulation on Investment Casting Mold for Metal Matrix Composite Material”, Advances in Mechanical Engineering, Volume 2, Number 4, pp 33-39, 2012 (ISI, Refereed)
67 Seyed Mojtaba Zabihinpour Jahromi1, Abbas Saghaei , M. K. A. Ariffin, “A Review on Fuzzy Control Charts for Monitoring Attribute data”, Applied Mechanics and Materials Vol. 159, pp 23-28, 2012 (ISI Refereed)
68 Sayuti, M., Sulaiman, S., Baharudin, B. T. H., M.K.H, Ariffin., Suraya, S., and Vijayaram, T. R, “Effect of Mould Vibration on Mechanical Properties of Particulate Reinforced Aluminium Alloy Matrix Composite”, Advanced Material Research, 445, 475-480, 2012, (ISI, Refereed)
69 Sayuti M., S. Sulaiman, B.T.H.T, Baharudin, M.K.A, Arifin, Vijayaram.T.R, and Suraya S, “Influence of Mechanical Vibration Moulding Process on the Tensile Properties of TiC Reinforced LM6 Alloy Composite Castings”, Advances in Mechanical Engineering, Volume 2, Number 4, pp 13-17, 2012 (ISI, Refereed)
70 S.H. Tang, W. Khaksar, N.B. Ismail, M.K.A. Ariffin, “A Review on Robot Motion Planning Approaches”, Pertanika journal Science and Technology, 20, 1, 15-29, 2012 (Refereed)
71 S. Nurhaiza, M.K.A. Ariffin, “Predictive Maintenance through Condition Monitoring at Diffusion equipment of a solar cell manufacturing environment”, Advanced Materials Research Vols. 476-478, pp 655-660, 2012, (ISI, Refereed)
72 S. M. Z. Jahromi, A. Saghaei and M.K.A.Ariffin, “A review on fuzzy control charts for monitoring attribute data”, Applied Mechanics and Materials, 159, 23-28, 2012 (ISI, Refereed)
73 S. Ariafar, N. Ismail, S. H. Tang, M. K.A. Ariffin, Z. Firoozi, “The Reconfiguration Issue of Stochastic Facility Layout Design in Cellular Manufacturing Systems”, International Journal of Services and Operations Management, 11, 3, 255-266, 2012, (Refereed)
74 Reza Shahjerdi, Mohd Khairol Anuar, Faizal Mustapha, Napsiah Ismail and Maryam Esmaeili, “Equilibrium and Non-Equilibrium models of the power markets”, African Journal of Business Management Vol.6 (4), pp. 1614-1625, 2012 (Refereed)
75 N. Fatchurrohman, S.Sulaiman, M.K.A. Ariffin, B.T.H.T.Baharuddin, and A.A.Faieza, “Solidification characteristic of titanium carbide particulate reinforced aluminium alloy matrix composites”, Journal of Engineering Science and Technology, 7, 2, 248-256, 2012 (Refereed)
76 N. Fatchurrohman, S. Sulaiman, S.M. Sapuan, M.K.A. Ariffin and B.T.H.T. Baharuddin, “A new concurrent engineering - multi criteria decision making technique for conceptual design selection”, Applied Mechanics and Materials, 225, 293-298, 2012 (Refereed)
77 Muhammad Yusuf, M.K.A. Ariffin, N.Ismail, S. Sulaiman, “Chip formation and surface roughness in dry machining of Aluminium Alloys”, Advanced Science Letters, Volume 19, Number 8, pp. 2343-2346(4), impact factor: 1.25 August 2013.
78 Muhammad Yusuf, M.K.A. Ariffin, N. Ismail and S. Sulaiman, “Optimization of Cutting Parameters on Turning Process Based on Surface Roughness using Response Surface Methodology”, Applied Mechanics and Materials Vols. 117-119, pp 1561-1565, 2012 (ISI,
Page 16/28
Refereed) 79 Mostafa Badakhshian, Shamsuddin B. Sulaiman and Mohd Khairol Anuar B. Mohd Ariffin,
“Performance optimization of simultaneous machine and automated guided vehicle scheduling using fuzzy logic controller based genetic algorithm”, International Journal of Physical Sciences Vol. 7(9), pp. 1461 - 1471, 2012 (ISI, IF 0.52)
80 Mohammad Amin Okhovat, Taravatsadat Nehzati, Amin Pouriran, Shahriar Fakhar, Mohd Khairol Anuar Mohd Ariffin, “Improving Equipment Effectiveness by Designing Optimal Production Process”, Advanced Materials Research, 383, pp 6363-6369, 2012 (ISI, Refereed)
81 Mohammad Amin Okhovat, Mohd Khairol Anuar Mohd Ariffin, Taravatsadat Nehzati, Seyed Ali Hosseini, “Development of world class manufacturing framework by using six-sigma, total productive maintenance and lean”, Scientific Research and Essays, 7, 50, 4230-4241, 2012 (IS,IF:0.34)
82 M.K.A.M. Ariffin, M. Fathi, N. Ismail, “A New Heuristic method to solve straight assembly line balancing problem”, Pertanika journal Science and Technology, 20, 2, pp 355-369, 2012 (Refereed)
83 M.K.A Ariffin, S.Sulaiman, Tang S.H., M.roshdi, S.B. Mohammed, “The effects of different grades of hob cutter in determining gear tooth accuracy”, Advanced Science Letters, 13, 519-524, 2012 (ISI, IF 1.253)
84 M. Sayuti, S. Sulaiman, T. R. Vijayaram, B. T. H. T. Baharudin, and M. K. A. Arifin, “Manufacturing of TiC Particulate Reinforced Al-11.8 Si Matrix Composites by Mechanical Vibration Mould”, Adv. Sci. Lett. 15, 12-15, 2012 (ISI, IF 1.253)
85 M. Hamedi, N. Ismail, G.R. Esmaeilian, M.K.A. Ariffin, “Developing a method to generate semi-distributed layouts by genetic algorithm”, International Journal of Production Research, 50, 4, pp 953-975, 2012 (ISI, IF 1.460)
86 M. Hamedi, G.R. Esmaeilian, N. Ismail, M.K.A. Ariffin, “Capability-based virtual cellular manufacturing systems formation in dual-resource constrained settings using Tabu Search”, Computers and Industrial Engineering, 62, 4, pp 953-971, 2012 (ISI, IF 1.516)
87 M. Badakhshian, S. Sulaiman, M. K. A. Ariffin, “Performance Optimization of Simultaneous Machine and Automated Guided Vehicle Scheduling Using Fuzzy Logic Controller Based Genetic Algorithm”, International Journal of Physical Sciences, 7, 9, pp 1461-1471, 2012 (ISI, IF 0.5)
88 H. Rashid , M. K.A. Ariffin, M. H. M. Noh, A. H. Abdullah, A. H. A. Hamid, M. A. M. Jusoh, A. Othman, “Design Review of Scissors Lifts Structure for Commercial Aircraft Ground Support Equipment using Finite Element Analysis”, Procedia Engineering, 41, 1696-1702, 2012 (ISI, Refereed)
89 B.T.H.T. Baharudin, M.R. Ibrahim, N. Ismail, Z. Leman, M.K.A. Ariffin, D.L. Majid, “Experimental Investigation of HSS Face Milling to AL6061 using Taguchi Method”, Procedia Engineering, 50, pp933-941, 2012 (ISI, Refereed)
90 Amir Sefidgaran, mohd khairol anuar mohd Ariffin, “An investigation of causes of an ineffective project management in construction projects”, science series data report, volume 4, issue 4, 2012.
91 A.Norozi, M.K.A.Ariffin, N. Ismail, F.Mustapha, “A hybrid GA-SA Algorithm for Multi-objective Sequencing Problem in High-product Mix Shop-floor”, Applied Mechanics and Materials Vols. 110-116, pp 3964-3971, 2012 (ISI Refereed)
92 A. Alaviafar, K. Mehdi and M. K. A. Ariffin, “Structural equation modeling vs multiple regression”, IRASCT - Engineering Science and Technology : An International Journal (ESTIJ), 2, 2250-3498, 2012 (Refereed)
93 A. Abdullah, S. Sulaiman, B.T.H.T. Baharudin, M.K.A. Ariffin, T.R.Vijayaram, “Effect of Moisture Content on the Permeability of Tailing Sand Samples Gathered from Ex Tin Mines in Perak State Malaysia”, Advances in Mechanical Engineering, Volume 2, Number 4,pp 18-23, 2012 (ISI, Refereed)
94 A Abdullah, Shamsuddin Sulaiman, BT Baharudin, MKA Ariffin, TR Vijayaram, Mohd Sayuti, “Testing for Green Compression Strength and Permeability Properties on the Tailing Sand Samples Gathered from Ex Tin Mines in Perak State, Malaysia”, Advanced Materials Research, Vol 445, pp. 859-864, 2012 (ISI, Refereed)
95 S.Suraya, S.Sulaiman, M.K.A M Arrifin and M.Sayuti, “Computer simulation and experimental investigation of solidification casting process”, key engineering materials,
Page 17/28
volume 417-472, pp 601-605, 2011 (ISI, Refereed) 96 S.Sulaiman, tang S Hong, S. Pawanchi, G.R. Esmaeilian, M.K.A Mohd Ariffin, B.T. Hang Tuah
Baharuddin, “Improvement of Tops Spinning Manufacturing with CNC lathe”, Procedia Engineering, Vol 15, pp 3886-3890. 2011 (ISI, Refereed)
97 S.Sulaiman, M.K.A Mohd Ariffin, G.R. Esmaeilian, , K. Faghihi, B.T. Hang Tuah Baharuddin, “Customer Knowledge Management Application in Malaysian Mobile Service Providers”, Procedia Engineering. Vol 15 (2011) pp 3891-3895. 2011 (ISI, Refereed)
98 S. J. Golestaneh, N. Ismail, S. H. Tang, M. K. A. M. Ariffin, H. Moslemi Naeini2 and A. A. Maghsoudi3, “A committee machine approach to multiple response optimization”, International Journal of the Physical Sciences Vol. 6(35), pp. 7935 - 7949, 2011, (ISI, IF 0.52)
99 Reza Shahjerdi, Mohd Khairol Anuar, Faizal Mustapha, Napsiah Ismail and Maryam Esmaeili, “An integrated inventory models under cooperative and non-cooperative seller-buyer and vendor supply chain”, African Journal of Business Management Vol. 5(20), pp. 8361-8367, 2011
100 S. M. Homayouni, S. H. Tang, N. Ismail, M. K. A. Ariffin, Using simulated annealing algorithm for optimization of quay cranes and automated guided vehicles scheduling, International Journal of the Physical Sciences Vol. 6(27), pp. 6286-6294 (2011)
101 Nurhaniza Mohamad, M.K.A. Ariffin, Aidy Ali, F. Mustapha, “Deflection Analysis of the Thin-Web Workpiece Structure Using Similarity Concept”, Advanced Materials Research Vol. 337 pp 479-488, 2011 (ISI, Refereed)
102 N.Fatchurrohman, S.Sulaiman, M.K.A M Arrifin, A.A Faieza and B.T.H.T. Baharudin, “Metal matrix composites: solidification parameters of aluminium-11.8% silicon alloy reinforced with titanium carbide particulates”, key engineering materials, volume 417-472, pp 1081-1084, 2011 (ISI, Refereed)
103 Mohd Sayuti, S. Suraya, Shamsuddin Sulaiman, T.R. Vijayaram, Mohd Khairol H. Arifin, B.T. Hang Tuah Baharudin, “Thermal Investigation of Aluminium - 11.8% Silicon(LM6) Reinforced SiO2-Particles”, Advance in material and processing technology II, Vol 264-265, pp 620-625, 2011 (ISI, Refereed)
104 M.Yusuf, K.Anuar, N.Ismail and S.sulaiman, “Influence of cutting parameters on surface roughness for wet and dry turning process”, key engineering materials, volume 417-472, pp 227-232, 2011. (ISI, Refereed)
105 M.Sayuti, S.Sulaiman, B.T.H.T. Baharudin M.K.A M Arrifin, T.R. Vijayaram and S.Suraya, “Effect of Quartz-silicon dioxide particulate on tensile properties of aluminium alloy cast composites”, key engineering materials, volume 417-472, pp 727-732, 2011. (ISI, Refereed)
106 M.Sayuti, S.Sulaiman, B.T.H.T. Baharudin M.K.A M Arrifin, S.Suraya and E.Gholamreza, “Mechanical vibration technique for enhancing mechanical properties of particulate reinforced aluminium alloy matrix composite”, key engineering materials, volume 417-472, pp 721-726, 2011. (ISI, Refereed)
107 M.S.A. Samad, Aidy Ali and M.K.A Ariffin, “Life prediction of rubber automotive components using finite element method”, Key Engineering materials volume 462-463, pp535-540, 2011 (ISI, Refereed)
108 M.K.A M Arrifin, S.Sulaiman, B.T.H.T Baharudin, T.S. Hong and S. Sreenivasan, “Simulation of thermoset injection for bulk mulding compounds (BMC)”, key engineering materials, volume 417-472, pp 1101-1106, 2011 (ISI, Refereed)
109 M.K.A M Arrifin, N.M.I.N. Hassan and M.F. Abdullah, “Analysis of MPV Dashboard using Solidworks and Abaqus”, key engineering materials, volume 417-472, pp 634-639, 2011 (ISI, Refereed)
110 M. Fathi, A. Jahan , M.K.A. Ariffin, N. Ismail, “A new heuristic method based on CPM in SALBP”, Journal of Industrial Engineering International, Volume 7, Issue 13, 30 Mar 2011
111 Hazem K. Alsultaney, Mohd Khairol Anuar Mohd Ariffin, B.T. Hang Tuah Baharudin, Aidy Ali and Faizal Mustapha. “An experimental validation and optimisation tool path strategy for thin walled structure”, Journal of sciense and technology (Pertanika), Vol 19 (2), 2011. (Refereed)
Page 18/28
112 A.norozi, M.K.A Ariffin, N.Ismail, F. Musthapa, “A hybrid GA-SA algorithm for multi-objective scheduling problem in high-product mix shop-floor”, scientific research and essay 2011. (ISI, IF 0.324)
113 A.Norozi, M.K.A Ariffin, N.Ismail and F.Mustapha, An optimization technique using hybrid GA-SA algorithm for multi-objective scheduling problem, Scientific research and Essays, 6(8): 1720-1731, 2011 (ISI, IF 0.324)
114 A. Azhar, S.Sulaiman, B.T.H.T. Baharudin M.K.A M Arrifin, and T.R. Vijayaram, “The effect of bentonite clay on green compression strength for tailing sands from old tin mines in Perak state, Malaysia for making green sand casting mould”, key engineering materials, volume 417-472, pp 769-774, 2011 (ISI, Refereed)
115 S. M. Sapuan, K. W. Ham, K. M. Ng, C. K. Woo, M. K. A. Ariffin, B. T. H. T. Baharudin, A. A.Faieza, E. E. Supeni and N. A. A. Jalil, “Design of composite racing car body for student based competition”, Scientific Research and Essay Vol.4 (11), pp. 1151-1162, 2009. (ISI, IF: 0.324.)
116 Nurhaniza. M., M.K.A. Ariffin, Aidy Ali, F. Mustapha, Noraini. A. W. “Finite Element Analysis of Composites Materials for Aerospace Applications”, IOP Conference Series Materials Science and Engineering open access journal 11(1). 2009 (Refereed)
117 Masood Fathi & M. K. A. Ariffin & Napsiah Ismail, A note on “A multi-objective genetic algorithm for solving assembly line balancing problem”, Int J Adv Manuf Technol, 16(5):341-352, 2010 (ISI, IF 1.205)
118 M. K. A Mohd Ariffin, M. I. Mohd Ali, S. M. Sapuan and N. Ismail, “An optimise drilling process for an aircraft composite structure using design of experiments”, Scientific Research and Essay Vol.4 (10), pp. 1109-1116, 2009.(ISI, IF: 0.324)
119 H. Nouri , S.H. Tang, B.T. Hang Tuah, M.K. Anuar , BASE: “A bacteria foraging algorithm for cell formation with sequence data”, Journal of Manufacturing Systems 29(2-3): 102-110, 2010 (ISI, IF:1.072)
120 B.T.H.T. Baharudin, S. Sulaiman, M.K.A. Ariffin, A.A. Faieza and S.M. Sapuan, “Coating Performance in High Speed Micro Machining of H13, Tool Steel”, Advanced Materials Research Vols. 83-86 pp 985-992, 2010 (ISI, Refereed)
121 A.S. Farahani, N.M. Adam and M.K.A. Ariffin, “Simulation of Airflow and Aerodynamic Forces Acting on a Rotating Turbine Ventilator”, American J. of Engineering and Applied Sciences 3 (1): 159-170, 2010 (ISI, IF 1.4)
122 A. Norozi, M.K.A. Ariffin and N. Ismail, “Application of Intelligence Based Genetic Algorithm for Job Sequencing Problem on Parallel Mixed-Model Assembly Line”, American J. of Engineering and Applied Sciences 3 (1): 831-840, 2010 (ISI, IF:1.4))
123 A. A. Faieza, S. M. Sapuan, M. K. A. Ariffin, B. T. H. T. Baharudin and E. E. Supeni, “Design and fabrication of a student competition based racing car, Scientific Research and Essay Vol. 4 (5) pp. 361-366, 2010. (ISI, IF:0.324)
124 S.M. Homayouni, Tang S.H., N.Ismail, M.K.A. Ariffin, R. Samin, A Hybrid genetic-heuristic algorithm for scheduling of automated guided vehicles and quay craness in automated container terminals. IEEE. 2009
125 Shamsuddin Sulaiman, M.K.A.Ariffin, A.A.Faieza and Elfetori F. Abdewi. Effects of Shape and Geometry on the Energy Absorption of Fiberglass Composite Tubes. World Journal of Engineering, 2008, 5(3): 474-475.
126 M. Jolgaf, S.B. Sulaiman, M.K.A. Ariffin and A.A. Faieza, Closed Die Forging Geometrical Parameters Optimization for Al-MMC, American J. of Engineering and Applied Sciences, Vol1, pg 1-6, 2008 (EBSCO, WAD, ASA, DOAJ)
127 M Jolgaf, SB Sulaiman, MKA Ariffin, AA Faieza, Billet shape optimization for minimum forging load, European Journal of Scientific Research 24 (3), 420-427, impact factor 0.736, 2008
128 Faieza, A.A., Sulaiman, S., N. Ismail, Ariffin, M.K.A, B.T.H.T. Baharuddin, Visual Feedback and Pseudo-Haptic Feedback Improve Manual Lifting Performance, Jurnal Teknologi, volume 49, pg10, scopus 2008
129 S. Sulaiman, M.K.Ariffin, “Design, Analysis and Simulation of Plastic Injection Moulding Product”, Int. Journal of materials and processing technology, (2002), pp.115-120
Page 19/28
Conference Proceedings
1 A.Norozi, M.K.A.Ariffin, N. Ismail, F.Mustapha, “A Hybrid GA-SA Algorithm for Multi-Objective Sequencing Problem in High- Product Mix Shop-Floor 2nd International Conference on Mechanical”, Industrial, and Manufacturing Technologies (MIMT), 26-28 February 2011, Singapore
2 Seyed mahdi homayouni, tang sai hong, napsiah ismail, mohd khairol A.M.K. Ariffin, “Optimization of integrated scheduling of quay cranes and automated guided vehicles using simulated annealing algorithm”, International conference on industrial engineering and operations management, January 22-24, 2011, Kuala Lumpur, Malaysia
3 Hossein nouri, Tang sai hong, B.T Hang tuah, and Mohd khairol anuar, “Development of bacteria foraging algorithm on cell formation”, Wec 2010, 2-5 August 2010, Kuching Serawak
4 M.Fathi, R. Shahrjerdi, M.K.A. Ariffin, N. Ismail, “A new heuristic method to solve straight assembly line balancing problem”, WEC 2010, 2-5 August 2010, Kuching Serawak
5 M.Nurhaniza, M.K.A M. Ariffin, Aidy Ali, F.Mustapha, H.K. Alsultany, “Applications of intelligent tool path strategy to increase efficiency and productivity in manufacturing”, WEC 2010, 2-5 August 2010, Kuching Serawak
6 N. ismail, Sh. Ariafar, S.H. tang, M.K.A. Ariffin, Hassan Moslemi Naeini and dorious rouhani, “Modified committee neural networks for prediction of machine failure times”, 3rd National Intelligent Systems and Information Technology Symposium 2010, 13-14 October 2010, Serdang Selangor
7 N.Fatchurrohman, S.sulaiman, M.K.A ariffin and A.A Faieza, “Solidification properties of metal matrix composites: Aluminium alloy reinforced with titanium carbide particules fabricated by sand casting method”, WEC 2010, 2-5 August 2010, Kuching Serawak
8 N.Fatchurrohman, S.sulaiman, M.K.A ariffin and A.A Faieza, “Solidification properties of metal matrix composites: Latent heat and solid fraction aspects”, WEC 2010, 2-5 August 2010, Kuching Serawak
9 R.Shahjerdil, M.Khairol, F.Mustapha, N.ismail and M. Esmaeili,, “Developing inventory models for the seller-buyer and the vendor supply chain”, Wec 2010, 2-5 August 2010, Kuching Serawak
10 S.Mahdi Homayouni, Tang sai Hong, Napsiah ismail and M.Khairol A.M.K Ariffin, “A genetic algorithm for optimization of simultaneous scheduling of AGVs and QCs in container terminals”, APIEM, 7-10 December 2010, Melaka Malaysia.
11 Salleh, I.M., Rani M.M, Ariffin M.K.A, Mustapha F. , “Model based structural health monitoring system for aicraft part using genetic algorithm and finite element analysis”. Aerotech 2010, Kuala Lumpur
12 Sayuti. M, S. sulaiman, Vijayaram T. R., B.T.H.T Baharudin, Ariffin M.K.A and Suraya S., “Manufacturing and mechanical properties of titanium carbide particulate reinforced aluminium – 11.8% silicon alloy matrix composite castings”, WEC2010, 2-5 August 2010, Kuching Serawak
13 Sh. Ariafar, N. ismail, S.H. tang, M.K.A. Ariffin, “A facility layout model in cellular manufacturing systems”, 3rd National Intelligent Systems and Information Technology Symposium 2010, 13-14 October 2010, Serdang Selangor
14 Sh. Ariafar, N.Ismail, S.h. Tang, M.K.A. M. Ariffin and Z.firoozi, “A simulated annealing algorithm for facility layout problem in cellular manufacturing systems”, Wec2010, 2-5 August 2010, Kuching Serawak
15 Suraya S, M. Sayuti M, Sulaiman S, and Ariffin. M.K.A. “Tensile properties of titanium carbide particulates composites” , ENCON 2010 14-15 April 2010, Kuching Serawak
16 Suraya, S.sulaiman, S.sayuti M, M.K.A Ariffin and Mohd Asri Mohd Norr, “The effect of Tic Microstructure and tensile properties of aluminium – 11.8% Silicon alloy”, Wec2010, 2-5 August 2010, Kuching Serawak
17 Z.firoozi, S.H. Tang, M.K.A Ariffin, Sh. Ariafar, “Integrated inventory location problems: A review” WEC 2010, 2-5 August 2010, Kuching Serawak
18 A.Norozi, M.K.A Ariffin, and N.Ismail, “Developing mixed-integer programming model for minimizing the overall make-span time in mixed model assembly line”’ ATCI, CISAR 2009, 3-5 November 2009, PWTC Kuala Lumpur.
19 H.K.Alsultaney, M.K.A Ariffin, B.T.H.T Baharuddin, A.Ali and F.Mustapha, “Development of
Page 20/28
combinatorial ptimization for cutting tool path strategy”’ NSPM 2009, 14-16 December 2009, Bangi Selangor
20 Hazem k. Alsultaney, M.K.A Mohd Ariffin, Faizal Mustapha, “Development of combinatorial optimisation for cutting tool path strategy”’ ICQPPM 2009, 16 -18 November 2009, Putrajaya Malaysia
21 M.fathi, A.Norozi, M.K.A Ariffin, and N.Ismail, “A new bidirectional heuristic algorithm in a multi objective ALBP”, ATCI, CISAR 2009, 3-5 November 2009, PWTC Kuala Lumpur.
22 M.Hamedi, N.Ismail, M.M.H megat Ahmad, M.K.A Ariffin and G.R. Esmaeilian, “A survey on performance and requirements of virtual cellular manufacturing versus classical cellular manufacturing and future research”’ATCI, CISAR 2009, 3-5 November 2009, PWTC Kuala Lumpur.
23 M.nurhaniza, M.K.A Ariffin, A.Ali, F.Mustapha and A.W.Noraini, “Finite element analysis of composite materials for aerospace applications”, NSPM 2009, 14-16 December 2009, Bangi Selangor
24 M.Sayuti, Suraya S, S. Sulaiman, T.R Vijayaran, M.K.H. Ariffin and B.T.H.T Baharudin, “Thermal investigation of Aluminium – 11.8% silicon (LM6) Reinforced Sio2-Particles”’ AMPT 2009, 26th - 29th October, 2009, Gombak, Selangor, Malaysia
25 N. Fatchurrohman, S.Sulaiman, M.K.A Ariffin and A.A. Faieza, “The effect of particulate reinforcement addition to latent heat and solid fraction during solidification of titanium carbide particulates reinforced aluminium alloy matrix composite produced by sand casting”, ATCI, 3-5 November 2009, PWTC Kuala Lumpur.
26 S.suraya, S. Sulaiman, S.H. Sheikh Md. Fadzullah, M.sayuti and M.K.A Ariffin, “Mechanical anisotropy ptimiza of fused deposition modeling”’ NSPM 2009, 14-16 December 2009, Bangi Selangor
27 Seyed Jafar Golestaneh, Napsiah Ismail, Tang sai hong, Mohd Khairol M. A, Hassan Moslemi Naeini and Darioush, “Committee Neural Networks for prediction of machine failure times”, ATCI, CISAR 2009, 3-5 November 2009, PWTC Kuala Lumpur.
28 A.A. Faieza, S. Sulaiman, M.K.A. Ariffin, B.T.H.T. Baharuddin, “Virtual Training Enhances User Performance” ARCS 2008, 7-10 July 2008, Orlando, FL, USA
29 Ariffin, M. K. A.; Badakhshian, M.; Sulaiman, S. B.; Faeiza, A. A. , “Automated Guided Vehicles Scheduling Optimization by Fuzzy Genetic Algorithm” The 12th World Multi-Conference on Systemics, Cybernetics and Informatics: WMSCI, 29 jun – 2 july 2008, Orlando, Florida, USA
30 B.T.H.T. Baharudin, S. Sulaiman, M.K.A. Ariffin and A.A. Faieza, “Coating Performance in High Speed Machining”, AMPT 2008, 2 -5 November 2008 Manama, Bahrain
31 F. Golestaneh, Aidy Ali, M. K. Arifin, M. Zadeh, “A comparison of fatigue crack growth modeled by paris and nicolls laws in FSW joints”. FEIIC Seminar on Engineering and Technology (SET 2008), 15-16th December 2008. Kuching Sarawak.
32 M. Zadeh, Aidy Ali, M. K. Arifin, A. F. Golestaneh B. B. Sahari, “A numerical analysis of fatigue crack growth in FSW of 2024-T351 al alloy by FRANC3D”, FEIIC Seminar on Engineering and Technology (SET 2008), 15-16th December 2008. Kuching Sarawak.
33 M.Badakhshian, S. B. Sulaiman, M. K. A. Ariffin, “Performance Optimization of Automated Guided Vehicles using Fuzzy Genetic Algorithm”’ International Conference on Mechanical and Manufacturing Engineering, ICME 2008, 21-23 May 2008, Johor Bahru Malaysia
34 M.K.A.Ariffin, A.A.Faieza N.Ismail, B.T.H.T Baharudin and S. Sulaiman. “Intergration of finite element analysis and matlab for genetic alagorithm optimization”, AMPT 2008, 2 -5 November 2008, Manama Bahrain.
35 Mostafa badakshian, shamsuddin sulaiman, Mohd khairol anuar mohd Ariffin, “Fuzzy genetic algorithm model for optimization of automated guided vehicle scheduling”, 38th Conference on Computer and Industrial Engineering (CIE38), 31 October – 2 November 2008, Beijing, China.
36 R . Afshar , Aidy Ali, M. K. Arifin, B. B. Sahari, “Auto adjust COG of Tubular Structure During Crush Deformation”, FEIIC Seminar on Engineering and Technology (SET 2008), 15-16th December 2008. Kuching Sarawak.
37 R. A. Bakar, M.K.A Ariffin, B.T.H.T Baharudin, N.A. Abdul Jalil, A.A. Faieza and N. Ismail, “Design and modeling of rubbish compactor unit”, FEIIC Seminar on Engineering and Technology (SET 2008), 15-16th December 2008. Kuching Sarawak.
38 S. Sulaiman, Elfetori F. Abdewi, M.K.A.Ariffin and A.A.Faieza, “Effects of shape and geometry on the energy absorption of fiberglass composite tubes”, International Community for
Page 21/28
Composites Engineering (ICCE) 16, 20-26 July 2008, Kunming China. 39 S.Mahdi Homayouni, Tang sai Hong, Napsiah ismail and M.Khairol A.M.K Ariffin, “Application of
intelligent agents in knowledge exchange with customers”, FEIIC Seminar on Engineering and Technology (SET 2008), 15-16th December 2008. Kuching Sarawak.
40 S.sulaiman, elfetori abdewi, M.K.A. Ariffin and N. Fatchurrohman, “Crushing behaviour of cylindarical and radial corrugated composite tubes”, IC2MS, 5-7 august 2008, Melaka Malaysia
41 S.sulaiman, M.K.A Ariffin, A.A. Faieza and Elfetori F. Abdewi, “Effects of shape and geometry of on the energy absorption of fiberglasss composite tubes” ICCE-16, 20-26 July 2008 Kunming China
42 S.Sulaiman, M.K.A.Ariffin, A.A.Faieza and Elfetori F.Abdewi, “Manufacturing of Radial Corrugated Composite Tubes for Crushing Behaviour and Energy Absorption”, AMPT 2008, 2-5 November 2008, Manama, Bahrain
43 S.Sulaiman, M.K.A.Ariffin, A.A.Faieza and Elfetori F.Abdewi, “Optimisation of Die Casting Design”, AMPT 2008, 2 -5 November 2008. Manama, Bahrain
44 Ariffin, M.K.A. and Faieza, A.A., “Genetic Algorithm and Finite Element Analysis Database System for Optimisation:, World Engineering Congress 2007, 5-7 August 2007, Penang Malaysia.
45 M.K.A. Mohd Ariffin, N.D.Sims , K.Worden, “Genetic Optimisation of Machine Tool Paths”, ACDM, 20-22 April 2004, Engineers house, Clifton, Bristol, UK.
46 S.Sulaiman, A.M.S Hamouda and M.K.A Ariffin, “Design and fabrication of plastic injection mould”, AMPT 2003, 8-11 July 2003, Dublin Ireland
47 M.K.A Ariffin, S. Sulaiman, M.M.Hamdan, Z.Leman, N Ismail, “Design, Analysis and Fabrication of Plastic Injection Mould for Tensile Test Specimen”, World Engineering Congress 2002, 22-25 July 2002, Sarawak Malaysia
48 M.K.A Mohd Ariffin, S. Sulaiman, M.M. H.Megat Ahmad, “Plastic Flow Simulation of Plastic Injection Moluding Process”, The International Conference on Mechatronics, 12-13 February 2001, Kuala Lumpur
Page 22/28
Other Publications (Local/International News Coverage)
NO Title
1 Educational Innovation of Motorsport & Automotive Race 09 (EIMA Race 09), UPM captures Second Place, The Putra (A prestigious publication by Universiti Putra Malaysia), issue 7 July-September 2009, Pp 27 – 28.
2 Discussion on Fuel RON 97 and RON 95, Berita Perdana TV1, 2 september 2009.
3 Gasing plastic, Menyusur akar orang kita, 6 februari 2014 (Laporan Khas TV1, 6 Februari 2014: Jam 12:30 – 13:00)
4 Challenges in Machining Composite Materials, 28 August 2014, IEM Petaling Jaya Malaysia
f. Recognition/Awards
No Year
1 2014 Excellent in Service Award for 2014
2 2013 Excellent in Service Award for 2013
3 2012 Recipient of Excellent in Service Award 2012- Head of Department 2012 (APC 2012)
4 2011 Certificate for Invention, Research and Innovation Exhibition, Universiti Putra Malaysia, 2011 (Principle Investigator)
5 2011 Silver Medal for Invention, Research and Innovation Exhibition, Universiti Putra Malaysia, 2011 (Investigator)
6 2010 Certificate of involvement from Selangor Government 2010
7 2009 Bronze Medal for Invention, Research and Innovation Exhibition, Universiti Putra Malaysia, 2009 (Principal Investigator)
8 2009 Bronze Medal for Malaysia Technology Expo 2009 (Principal Investigator)
9 2008 Recipient of Excellent in Service Award 2008 – APC 2008
10 2007 Excellent in Service Award for 2007, 2009, 2010 and 2011
11 2007 Silver Medal for Invention, Research and Innovation Exhibition, Universiti Putra Malaysia, 2007 (Investigator)
g. National and International Linkages/ Collaborative Partners
Co-founder of MoU/MoA networking between UPM and Yanbu Technical University, Saudi Arabia Among the Collaborative Partners are:
No Institution Collaborative Area
1 Steelcase Malaysia Global Product Engineering (Design and implementation)
2 Continental Malaysia Penang
Development of Visualized Earned Value Analysis in Product development projects
3 Unisza Cutting parameters for composite materials
4 Utem Cutting Parameter Optimization of Hybrid
Micro-rotary Wire Electrical Discharge for
Surgical Device Fabrication
Page 23/28
5. Professional Services and Administrative Duties
a. Professional Services
International
No Detail Designation Duration
1 IEOM Conference Track Chair (manufacturing and Design)
2015-2016
2 Asian Engineering Journal Part A Editorial Board 2013 - present 3 2014 4th International Conference on Key
Engineering Materials Technical Committe
2013- 2014
4 SAMPE ASIA 2012 Judge 2012 5 American Society of Mechanical Engineer Members 2006 - present 6 Regional Conference on Mechanical and
Manufacturing Engineering Chairman May – Nov 2013
7 Conference ATCI (CISAR 2009) Session Chair Nov 2009 8 International, Conference on Intelligent Systems and
Robotics ATCI (CISAR 2009) Technical Committe
2009
9 World Engineering Congress 2010 Session Chair Dec 2010 10 Conference (WEC 2007) Session Chair August 2007 11 International Conference on Advances in Mechanical
and Manufacturing Engineering Chairman 2013
12 International conference on composite science and
technology (ICCST/08) Organising Committee 2011
13 Composite Science and Technology. Vol. 471 Key
Engineering Materials Editor 2011
14 Composite Science and Technology. Vol. 472 Key
Engineering Materials Editor 2011
15 International, CMTM, World Engineering Congress
(WEC 2010) Secretary 2010
National
No Detail Designation Duration
1 Infranstructure University Kuala Lumpur (IUKL) – Bachelor of Mechanical
Industrial Advisory Panel – Mechanical Engineering (EAC accreditation program)
2015-2017
2 Bachelor of Manufacturing engineering technology (Technology and Process) -
Assessor for Program under MQA
2015
3 Bachelor of Manufacturing engineering technology (Product Design) -
Assessor for Program under MQA
2015
4 Ministery of Education (Automotive performance inspection to Korea)
Expert Panel/Judge 2015
5 Malaysian Qualifications Agency Expert Panel 2014-2017 6 Jabatan Perkihmatan Awam (Federal Training
Funds) Expert Panel/Judge 2013
7 America Society of Mechanical Engineer (Malaysia Section)
Secretary 2012 - 2014
8 Committee for the Program (Bachelor of Technology – Product Design and Manufacturing Engineering) - UNISZA
Expert Panel/Program Development
2011 -2013
9 Committee for the Program (Diploma of Manufacturing Technology ) - UNISZA
Expert Panel/Program Development
2011 - 2013
10 Malaysia Technology Expo 2010 Expert Panel/ Judge 2010 11 Diploma in Die Casting Processing technology -
KKTM Alor Gajah Committee 2008
Page 24/28
12 Focus group Kenaf development (Mechanisation), National Tobacco Board
Member 2010
13 Special issue of NSPM 2009, Issue 19(2) Journal Pertanika Journal Science and Technology
Guest Editor 2009
14 Special issue of NSPM 2009, Issue 18(2) Journal Pertanika Journal Science and Technology
Guest Editor 2009
15 Special issue of NSPM 2009, Issue 19(1) Journal Pertanika Journal Science and Technology
Guest Editor 2009
16 National, Conference proceeding 9th National Symposium of Polymeric Materials NSPM 2009
Chief Editor 2009
17 National, National Symposium on Polymeric Materials 2009
Advisor 2009
18 National, National Symposium on Polymeric Materials 2009
Scientific Committee 2009
19 Eimarace - UTM Judge 2009 - 2010 20 Formula Varsity - UTEM Judge 2008
University
No Detail
Designation Duration
1 Sport and Social Club Faculty of Engineering President 2012-2014 2 Mentor for New Lecturer (Dr. Siti Azfanizam) Mentor 2012-2013 3 Panel evaluator for program Bachelor of Wood
Science and Technology Panel 2011-2012
4 Engineering Doctorate Program Member 2011 - now 5 Institute of Advanced Technology (ITMA - ISRL) Research Associate 2010 - 2011 6 Institute of Tropical Forestry and Forest Products
(INTROP) Research Associate 2012 -2013
7 ROBOCON, UPM Team Manager (Mechanical) 2008-2009 8 Inter-institutional race, Eimarace Director 2009-2010 9 Academic Advisor Advisor 2006 - present 10 Shell Eco Marathon Director 2011-2012 11 AUTO-CAD for Undegraduate Speaker and Demonstrator 2007 12 SAR-EAC Report for Bachelor of Mechanical and
Manufacturing Engineering Member 2009
b. Technical Reviewer (Selected)
No Journal/Conference Designation Duration
1 Materials and Design Reviewer 2015 2 RCMME Conference Technical Reviewer 2013 3 ICAM2E, Conference Technical Reviewer 2013 4 Ain Shams Engineering Journal Reviewer 2013-Present 5 Machining Science and Technology Reviewer 2012-Present 6 Journal of Mechatronics Reviewer 2008-Present 7 Journal of Petroleum and Gas Engineering Reviewer 2010-Present 8 Journal of ISSAAS Reviewer 2011-Present 9 IEM Journal of Institute of Engineer Malaysia Reviewer 2008-Present 10 Key Engineering Material 2010 Reviewer 2010 11 World Engineering Congress 2010, Serawak Technical Reviewer 2010 12 NSPM 2009, National Symposium of Polymeric
Materials Technical Reviewer 2009
13 World Engineering Congress 2007, Penang Technical Reviewer 2007
Page 25/28
c. Examiner/ Evaluator
PhD Examiner
No Title Name Type Year
1. Hybrid Tabu Search for catching and sequencing decisions on a single machine environment
Yasothei Suppiah (MMU)
External 2014
2. A framework of configuration design phase for sustainable product design
Mohd Fahrul bin Hassan (UTM)
External 2014
3. Computational crashworthy optimization of partially filled aluminium foam for automotive side member
Salwani bt. Mohd Salleh
Internal 2013
4. Image-based oil palm fruit bunch growth modelling for harvesting operation
Muhamad Saufi Mohd Kassim
Internal 2013
5. Development of an innovative neuro-fuzzy assessment system for the 25uropean foundation for quality management
Javad Dodangeh Internal 2013
6. Internal defect detection and reconstruction framework for laminated glass fibre reinforced polymer composite materials
Ng Sok Choo Internal 2013
7. Development of a model on a natural gas transmission networks supply chain,
Mehrdad nikhbakht Elianderany (GS21374)
Internal 2012
8. Design and analysis of hip implant in bone resorption environment
Solehuddin bin shuib (GS 15723)
Internal 2012
9. Developing a fuzzy integral group MCDM model based on linguistic evaluation for personnel selection problem
Alireza Afshari (GS19702),
Internal 2012
10. Development of a systematic method in lean tool selection for automotive industry
Alireza Anvari Internal 2012
11. Computational crashworthy optimization of partially filled aluminium foam for automotive side member
Suriani binti Mat Jusoh
Internal 2012
12. Conceptual design, development and fabrication of a prototype ergonomic lumbar support for motorcyclists
Karmegam a/l Karuppiah
Internal 2012
13. Design, development, and evaluation of kenaf pneumatic seeding machine
Mohammadreza Bakhtiari
Internal 2012
14. Development of group decision making model under fuzzy environment
Mohammad Anisseh Internal 2012
15. Development of an integrated technology transfer model for the Libyan petroleum industry,
Al Mabruk S. Mohamed 2011
Internal 2011
16. In-process surface roughness monitoring based on workpiece surface temperature for turning operations
Adeel Hani Suhail Internal 2011
17. Development of load shuffling and travel time models for miniload automated storage and retrieval system with an open-rack structure
Mohammadreza Vasili
Internal 2011
18. Improving multi-criteria decision making algorithm for material selection
Ali Jahan Internal 2011
Master Examiner
No Name Title Type Year
1. Sepide Najafian (GS16329) Productivity of Flexible Manufacturing Cell by Internal 2008
Page 26/28
Implementing Different Maintenance Policies,
2. Maryamalsadat Vafa (GS18176)
Visualing supply chain using social network analysis in project based industry,
Internal 2009
3. Aghdas Naimi Sadigh (GS22476)
Developing a model for supplier selection based on loss functions
Internal 2009
4. Giwa Solomon Olanrewaju (GS19097)
Investigation of the potential of egusi melon (colocynthis Citrullusl.) seed oil as diesel fuel substitute,
Internal 2009
5. Mahshid Sadat Abtahi Foroushani (GS20207)
Development of an innovative algorithm for the travelling salesman problem (TSP)
Internal 2010
6. Yaaseen Rafeeu (GS20559) Factors of maximizing solar fraction under wet climate environment,
Internal 2010
7. Wang Bin (GS18190) Prediction of Turning machine degradation status based on vibration data using back propagation (BP) Neural Network
Internal 2010
8. Hamidreza panjehfouladgaran (GS 19844)
Development and performance evaluation of mobile traffic infraction registration system,
Internal 2010
9. Reza Raminfar (GS19818) 2010
Development of an integrated model for production planning and cell formation problem in cellular manufacturing system
Internal 2010
10. Taravatsadat nehzati (GS25201)
Production scheduling of reconfigurable manufacturing systems using fuzzy logic technique
Internal 2012
11. Reza Afshar Hosseinabadi (GS20884)
Auto Generation and Auto Adjust of the center of gravity of tabular structure during crush deformation
Chairman 2009
12. Syahrul Azwan bin Sundi @ Suandi (M050810004) - UTHM
Simultaneous Five-Axis Machining on the Wall cutting of curved shape component
External 2010
13. Oon Cheen Sean (KGA 100039) - UM
A Computational simulation of heat transfer to turbulent separation fluid flow in a concentric pipe.
External 2012
14. Nurul Husna binti Mohd Nawawi - UTEM
Optimisation of cutter geometrical feature for machining orthopedic, trauma and spinal biomaterials implant
External 2015
15. W noor Fatihah binti W Mohamad – Unisza (PS0287)
Machining parameters optimization for trimming operation in milling machine using two level full factorial design
External 2015
Evaluator
No Detail
Designation Duration
1 Ministry of Education Malaysia (Interviewer Panel for Scholarship)
Panel 2014
2 National Department for Culture and Arts (TOP Spinning Educational Modul)
Panel 2014
3 Malaysian Qualifications Agency (Diploma Teknologi Kejuruteraan Rekabentuk Produk – Perda Tech)
Panel/Evaluator 2014
4 Malaysian Qualifications Agency (Master in Manufacturing Systems – Kolej Universiti Linton)
Panel/Evaluator 2014
5 RUGS Grant Aplication Panel/Evaluator (UPM) 2014 6 Science Fund, FRGS, ERGS, PRGS, RUGS Grant
Aplication Panel/Evaluator (UPM) 2013
7 External verification (product Design and Mould Technology)
Evaluator (GMI) 2011
8 External verification (product Design and Mould Evaluator (GMI) 2012
Page 27/28
Technology) 9 External verification (CNC and Tools and Die
Technology) Evaluator (GMI) 2013
10 SAMPE student competiton Judge 2012
d. Professional Affiliation No Detail
Designation Duration
1 Institution of Engineers, Malaysia Corporate Member 2012 - Present 2 Malaysian Society for Engineering
and Technology Life Member 2012 - Present
3 Board of Engineers, Malaysia Professional Engineer (PEng/Ir.) - 16122 2013-Present 4 ASME Member 2006 - present 5 ASME Malaysia Section Trasurer 2011-2013 6 ASME Malaysia Section Scretary 2013-2015 7 Board of Engineers Malaysia (BEM) Registered Engineer Since 1999 8 Persatuan Pegawai Akademik Member 2007-Present
e. Administrative Duties
No Detail
Designation Duration
1 CAD/CAM Laboratory Coordinator 2015-2017 2 Dept. of Mechanical and Manufacturing Engineering Head 2012- 2015 3 Asian University Network (AUN/SEED-Net) UPM
Coordinator 2012-2015
4 Sport and Social Club, Faculty of Engineering President 2012 - 2014 5 Development coordinator for Department Coordinator 2006-2012 6 Program Master Kejuruteraan Sistem Pembuatan Coordinator 2010-2012 7 CAD/CAM Laboratory Coordinator 2008-2013
Page 28/28
f. Student Activities (Selected) There were many activities held and conducted in the capacity as the Head of Department, Coordinator, Director, member and Lecturer. Some are listed as follows:
No Type Position Year 1 Putra Motorsport (Department of
Mechanical and Manufacturing Engineering) – Formula Student Japan 2016
Director 2015-Present
2 Shell Ecomarothon Director 2012 3 Shell Ecomarathon Director 2011 4 Eimarace 2010 Director 2010 5 Eimarce 2009 Director 2009 6 Formula Varsity Director 2008 7 Robocon 2008 Mechanical Advisor 2008 8 Robocon 2007 Mechanical Advisor 2007 9 BE (Mechanical and Manufacturing) Academic Advisor 2006-Present
g. Referee Prof. Datin Dr. Napsiah Ismail
Department of Mechanical and Manufacturing Engineering
Faculty of Engineering
UPM
Prof. Dr. Shamsuddin Sulaiman
Department of Mechanical and Manufacturing Engineering
Faculty of Engineering
UPM
Prof. Ir. Dr. Wan Ishak bin Wan Ismail
Department of Biological and Agricultural Engineering
Faculty of Engineering
UPM
Prof. Ir. Dr. Sapuan bin Salit
Department of Mechanical and Manufacturing Engineering
Faculty of Engineering
UPM
Signature: ______________________________________
Date: 8/26/2015
I hereby certify that the information above is true.
Associate Prof. Ir. Dr. Mohd Khairol Anuar Mohd Ariffin
