Embed Size (px)
Citation preview
www.inspeedglobal.com [email protected]+90 553 775 16 48@InspeedGlobal
Accredited PT Provideraccording to
ISO/IEC 17043:2010
Interna�onal LaboratoryAccredita�on Coopera�on
Registered MemberID number 590861
bundesanstalt für material-forschung und prüfung
PROFICIENCY TESTING PT programs
2020
Once Certi�ed .. Globally Recognized
version 3
www.inspeedglobal.com [email protected]+90 553 775 16 48@InspeedGlobal 1
Inspeed Global – IG – is the first accredited PT provider in the Middle EastBy PJLA – US accreditation body – according to: ISO/IEC 17043:2010
www.inspeedglobal.com [email protected]+90 553 775 16 48@InspeedGlobal 2
Our PT programs cover the scope of:
Lore
m
IGPT programs
ConstructionMaterials
Page: 4
CalibrationPage: 16
Customized PT programs
Page: 17
Non-Destructive Testing (NDT)
Page: 15
Metallic Materials
Page: 9
IG is a worldwide company that is accredited as the first PT provider in the Middle East by PJLA (USA) according to ISO/IEC 17043:2010. IG has interna�onal offices in different countries to deliver the services of conformity assessment that includes; Proficiency Tes�ng to Tes�ng and Calibra�on Laboratories that implement ISO/IEC 17025 Scope of Accredita�on.
Accreditation Requirements for UKAS
Laboratories preparing for initial accreditation or wishing to extend their scope of accreditation are required to participate in PT/ILCs where such schemes are available UKAS Policy on Participation in Proficiency Testing TPS 47 (4.6)
www.inspeedglobal.com [email protected]+90 553 775 16 48@InspeedGlobal 3
PT Requirements for some accreditation bodies:
Accreditation Requirements for EIAC
The laboratory shall participate in Proficiency testing program (PTP) organized by any competent PTP provider and shall provide evidence that their results are within the acceptance criteria of the PTP organizer. The minimum amount of participation in proficiency testing schemes: EIAC-RQ-LB-002 (4.6.2) 4 times per year for all the critical tests 2 times per year all tests
EIAC-RQ-LB-001 (12.2.7) One activity related to each discipline at least once a year.
Accreditation Requirements for GAC
• The CAB is required to cover PT participation/ILC for all its activities
• If a CAB does not participate or participates only partially in PT/ILC, which are available and adequate then it might have consequences for the accreditation of the CAB
BD-091007-08-04 TN 4.0: GAC Technical Note 4 Proficiency Testing and ILC Policy (3.1)
Accreditation Requirements for IAS
Laboratories that are accredited or seeking accreditation to ISO/IEC Standard 17025 are expected to participate in at least one proficiency test (PT) for each field of accreditation. The laboratory is expected to complete the PT(s) within four years. IAS POLICY ON PROFICIENCY TESTING FOR LABORATORIES
PT programs for the year 2020
2020
Construction Materials Testing
www.inspeedglobal.com [email protected]+90 553 775 16 48@InspeedGlobal 4
Construction Materials Testing
PT
program No.
Month Material Test Test method Samples Price
USD
Samples Dispatch
date
Final PT report date
PT-CON-20-101 January Soil
Determination of liquid limit , Plastic Limit and Plasticity
Index
ASTM D 4318-17e1 / BS1377:Part
2:1990,CL 4.3,4.5 &5
2 Kg 300 $ 28/01/2020 04/03/2020
PT-MET-20-001 January
Steel- metallic material
Test method-Bend test
ASTM E190
ASTM E290
ASTM A370
3 bars 300 $ 28/01/2020 04/03/2020
PT-MET-20-002 January
Steel - metallic material
metallic material- Tensile testing at ambient temperature
ASTM E8/E8M ASTM A370
BS EN ISO 15630 ISO 6892 AS 1391
BS 4449:2005
3 bars 300 $ 28/01/2020 04/03/2020
PT-CON-20-102 February Aggregate Determination of Aggregate
Crushing Value BS 812-110:1990 20 mm 6 kg
300 $ 25/02/2020 02/04/2020
PT-CON-20-103 February Asphalt Marshall Stability and Flow of
Bituminous Mixtures ASTM D 6927 – 15 3 specimen
300 $ 25/02/2020 02/04/2020
PT-CON-20-104 March Soil Determination of Particle Size
Distribution
ASTM D 422-2007 / BS 1377: part2: 1990,CL9.2&9.3
15 kg 300 $ 25/03/2020 05/05/2020
PT-CON-20-105 March Soil Particle Size Distribution by
hydrometer method
ASTM D 422-2007 / BS 1377: part2:
1990,CL 9.5 1kg 300
$ 25/03/2020 05/05/2020
www.inspeedglobal.com [email protected]+90 553 775 16 48@InspeedGlobal 5
Construction Materials Testing
PT
program No.
Month Material Test Test method Samples Price
USD
Samples Dispatch
date
Final PT report date
PT-CON-20-106 March Chemical/soil Determination of pH Value of
Soil
BS 1377:1990 Part 3 Amd. 9028- 96 Cl. 9 BS 1377:Part 3 2018
Cl 12
1.5 kg
300 $ 25/03/2020 05/05/2020
PT-CON-20-107 March Chemical/soil
Determination of the Sulphate Content of Soil (Water Extract
& Acid Extract)
BS 1377:1990 Part 3 Amd. 9028- 96 Cl. 5.2/ 5.5 & 5.3/5.5
BS 1377:Part 3 2018 Cl 7.3 / 7.6
BS 1377:Part 3 2018 Cl 7.9 / 7.6
300 $ 25/03/2020 05/05/2020
PT-CON-20-108 March Chemical/soil
Determination of the Chloride Content of Soil (Water Extract
& Acid Extract)
BS 1377:1990 Part 3 Amd. 9028- 96 Cl.
7.2 & 7.3 BS 1377:Part 3 2018
Cl 9.2 BS 1377:Part 3 2018
Cl 9.3
300 $ 25/03/2020 05/05/2020
PT-CON-20-109 April Aggregate
Flat Particles, elongated particles or flat and elongated particles in coarse aggregate
/Determination of flakiness and elongation index of coarse
aggregates
ASTM D 4791-10 / BS 812-150.1:1989
and BS 812 -105.2:1990
20 mm 10 kg
300 $ 28/04/2020 03/06/2020
PT-CON-20-110 April Aggregate
Determination of shell content-Percentage of shells in coarse
aggregates
BS 812 Part 106: 1985 / BS EN 933-7:
1998
300 $ 28/04/2020 03/06/2020
PT-CON-20-111 May Soil Determination of California
Bearing Ratio (CBR)
ASTM D1883-16/ BS1377:Part 4:1990,CL 7
15 kg 300 $ 26/05/2020 06/07/2020
PT
program No.
Month Material Test Test method Samples Price
USD
Samples Dispatch
date
Final PT report date
PT-CON-20-112 May Aggregate
Density, Relative density (Specific gravity) and
absorption of fine aggregates
ASTM C 128-15 / BS 812 Part 2;1995
5mm 5 kg
300 $ 26/05/2020 06/07/2020
PT-CON-20-113 June Concrete
Determination of Water Absorption on hardened
concrete BS 1881-122: 2011 3 cubes 400
$ 29/06/2020 06/08/2020
PT-CON-20-114 June Bitumen
Determination of Ductility of Bituminous Materials
ASTM D 113-07
5 kg
400 $ 29/06/2020 06/08/2020
PT-CON-20-115 June Bitumen
Determination of Penetration of Bituminous Materials
ASTM D 5 -2013
400 $ 29/06/2020 06/08/2020
PT-CON-20-116 June Bitumen Determination of Softening
Point of Bitumen
ASTM D36/D36M-
14e1 400
$ 29/06/2020 06/08/2020
PT-CON-20-117 July Aggregate
Determination of Ten Percent fine value of Aggregates
(Dry & Soaked)
BS 812-111:1990, CL
7.1 & 7.2 20 mm/
5 kg 300 $ 28/07/2020 07/09/2020
PT-CON-20-118 July Asphalt
Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous
Paving Mixtures
ASTM D2172 /
D2172M-17 Wearing coarse 5 kg
300 $ 28/07/2020 07/09/2020
PT-CON-20-119 July Asphalt
Standard Test Methods for Mechanical Size Analysis of
Extracted Aggregate ASTM D 5444 – 15 300
$ 28/07/2020 07/09/2020
www.inspeedglobal.com [email protected]+90 553 775 16 48@InspeedGlobal 6
Construction Materials Testing
PT
program No.
Month Material Test Test method Samples Price
USD
Samples Dispatch
date
Final PT report date
PT-MET-20-021 July
Steel - metallic material
metallic material- Tensile testing at ambient temperature
ASTM E8/E8M ASTM A370
BS EN ISO 15630 ISO 6892 AS 1391
BS 4449:2005
3 bars 300 $ 28/07/2020 07/09/2020
PT-MET-20-020 July
Steel- metallic material
Test method-Bend test
ASTM E190
ASTM E290
ASTM A370
3 bars 300 $ 28/07/2020 07/09/2020
PT-CON-20-120 August Aggregate
Resistance to degradation of small and large size aggregate
by abrasion and impact in the Los
Angeles Machine
ASTM C 535-16 28 mm 15kg
300 $ 25/08/2020 06/10/2020
PT-CON-20-121 August Concrete Determination of the initial
surface absorption of concrete BS 1881-208:1996 3 cubes 300 $ 25/08/2020 06/10/2020
PT-CON-20-122
September Soil
Determination of dry density/moisture content
relationship
ASTM D 1557-12e1 / BS 1377:part 4:1990,
CL3.5/3.6 15kg 300
$ 28/09/2020 05/11/2020
PT-CON-20-123
September Concrete
Determination of depth of penetration of water under pressure/ Determination of
Water Permeability
BS EN 12390-8:
2009/ DIN 1048-
5:1991 3 cubes 300
$ 28/09/2020 05/11/2020
PT-CON-20-124 October Aggregate
Determination of Particle Size distribution
(Wet & Dry Sieving)
BS 812-103:1985
Section 103.1,
CL7.2&7.3 /BS EN
933-1-2012
20mm 10 kg
300 $ 27/10/2020 07/12/2020
www.inspeedglobal.com [email protected]+90 553 775 16 48@InspeedGlobal 7
Construction Materials Testing
PT
program No.
Month Material Test Test method Samples Price
USD
Samples Dispatch
date
Final PT report date
PT-CON-20-125 October Aggregate Determination of Clay Lumps
and Friable Particles ASTM C 142 / C
142M-17 300
$ 27/10/2020 07/12/2020
PT-CON-20-126
November Concrete
Method for determination of compressive strength of
concrete cubes
BS 1881 Part 116 BS EN -12390-3:2009
3 cubes 400
$ 25/11/2020 05/01/2021
PT-CON-20-127
November Soil Determination of Sand
equivalent value
ASTM D 2419-14/ BS EN 933-
8:2012+A1:2015
6 kg 300 $ 25/11/2020 05/01/2021
PT-CON-20-128
November
Chemical- Ground Water
Determination of the Chloride Content of Ground Water
BS 1377:1990 Part 3 Amd. 9028- 96 Cl.
7.2
1 Liter
300 $ 25/11/2020 05/01/2021
PT-CON-20-129
November
Chemical- Ground Water
Determination of the Sulphate Content of Ground Water
BS 1377:1990 Part 3Amd. 9028- 96 Cl.
5.4
300 $ 25/11/2020 05/01/2021
PT-CON-20-130
November
Chemical- Ground Water Determination of the pH value
BS 1377:1990 Part 3 Amd. 9028- 96 Cl. 9 BS 1377:Part 3 2018
Cl 12
300 $ 25/11/2020 05/01/2021
PT-CON-20-131
December Asphalt
Standard Test Method for Theoretical Maximum Specific
Gravity and Density of Bituminous Paving Mixtures
ASTM D2041/ D2041M-11 5 Kg 300
$ 28/12/2020 08/02/2021
PT-CON-20-132
December Aggregate Sieve analysis of fine and
coarse aggregates ASTM C 136 / C 136
M-14
20 mm 10kg
300 $ 28/12/2020 08/02/2021
PT-CON-20-133
December Aggregate Determination of Aggregate
Impact Value BS 812-112:1990 300 $ 28/12/2020 08/02/2021
www.inspeedglobal.com [email protected]+90 553 775 16 48@InspeedGlobal 8
Construction Materials Testing
PT programs for the year 2020
2020
Metallic Materials Testing
PT
program No.
Month Material Test Test method Samples Price
USD
Samples Dispatch
date
Final PT report date
PT program No.
Month Material Test Test method Samples Price
USD
Samples Dispatch
date
Final PT report date
PT-MET-20-001 January
Steel- metallic material
Test method-Bend test ASTM E190 ASTM E290 ASTM A370
3 bars 300 $ 28/01/2020 04/03/2020
PT-MET-20-002 January
Steel - metallic material
metallic material- Tensile testing at ambient
temperature
ASTM E8/E8M ASTM A370
BS EN ISO 15630 ISO 6892 AS 1391
BS 4449:2005
3 bars 300 $ 28/01/2020 04/03/2020
PT-MET-20-003 January Metallic material
Metallic materials - Vickers hardness test
ASTM E92 BS EN ISO 6507 250 gm 300 $ 28/01/2020 04/03/2020
PT-MET-20-004 February Metallic material
Metallic materials - Rockwell hardness test
(HRC &HRB)
ASTM E18
BS EN ISO 6508 250 gm 300 $ 25/02/2020 02/04/2020
PT-MET-20-005 February Metallic material
Metallic materials - Brinell hardness test
ASTM E10
BS EN ISO 6506 0.5 Kg 300 $ 25/02/2020 02/04/2020
PT-MET-20-006 February Metallic material
Standard Test Methods for Notched Bar Impact
Testing of Metallic Materials
ASTM E23
ASTM A370
BS EN ISO 148
AS 1544
200 gm 300 $ 25/02/2020 05/05/2020
PT-MET-20-007 March
Carbon and low alloy
Steel
Determination of chemical composition of
using Spark optical Emission Method
ASTM 415 250 gm 300 $ 25/03/2020 05/05/2020
www.inspeedglobal.com [email protected]+90 553 775 16 48@InspeedGlobal 9
Metallic Materials Testing
Month Material Test Test method Samples Price
USD
Samples Dispatch
date
Final PT report date
PT program No. Month
Material Test Test method Samples
Price USD
Samples Dispatch
date
Final PT report date
PT-MET-20-008 March Stainless
steel
Determination of chemical composition of
using Spark optical Emission Method
ASTM E1086 250 gm 300 $ 25/03/2020 05/05/2020
PT-MET-20-009 March Cast Iron
Determination of chemical composition of
using Spark optical Emission Method
ASTM E1999 250 gm 300 $ 25/03/2020 05/05/2020
PT-MET-20-010 March Cupper alloys
Determination of chemical composition of
using Spark optical Emission Method
BS EN ISO 15079 250 gm 300 $ 25/03/2020 05/05/2020
PT-MET-20-011 March Aluminum
alloys
Determination of chemical composition of
using Spark optical Emission Method
ASTM E1251 250 gm 300 $ 25/03/2020 05/05/2020
PT-MET-20-012 April Metallic material Load test BS EN 124 1.5 Kg 500 $ 25/04/2020 01/07/2020
PT-MET-20-013 April cast iron Load Test- Gully tops
and manhole tops made of cast iron
BS EN 124-2 10 Kg 500 $ 25/04/2020 01/07/2020
PT-MET-20-014 April steel or
aluminum alloys
Load Test- Gully tops and manhole tops made
of steel or aluminum alloys
BS EN 124-3 10 kg/ 7Kg 500 $ 25/04/2020 01/07/2020
www.inspeedglobal.com [email protected]+90 553 775 16 48@InspeedGlobal 10
Metallic Materials Testing
Month Material Test Test method Samples Price
USD
Samples Dispatch
date
Final PT report date
PT-MET-20-015 April steel
reinforced concrete
Load Test- Gully tops and manhole tops made
of steel reinforced concrete
BS EN 124-4 10 Kg 500 $ 25/04/2020 01/07/2020
PT-MET-20-016 April composite materials
Load Test- Gully tops and manhole tops made of composite materials
BS EN 124-5 5 Kg 500 $ 25/04/2020 01/07/2020
PT-MET-20-017 April
polypropylene (PP),
polyethylene (PE) or
poly(vinyl chloride)
Load Test- Gully tops and manhole tops made of polypropylene (PP),
polyethylene (PE) or un-plasticized poly(vinyl
chloride)
BS EN 124-6 1 Kg 500 $ 28/05/2020 01/08/2020
PT-NDT-20-301 May Non
Destructive testing
Standard Practice for Liquid Penetrant
Examination for General Industry
ASTM E165/E165M/
ASME 0 Sec. V 5 Kg 700 $ 28/05/2020 01/08/2020
PT-NDT-20-302 May Non
Destructive testing
Standard Guide for Magnetic Particle
Testing
ASTM E709/ ASME
0 Sec. V 5 Kg 700 $ 28/05/2020 01/08/2020
PT-NDT-20-303 May Non
Destructive testing
Determination of ultrasonic pulse velocity
BS EN 12504 Part 4 5 Kg 700 $ 28/05/2020 01/08/2020
PT-MET-20-018 June Steel – Flat
samples
metallic material- Tensile testing (Flat samples)
ASTM E8/E8M
ASTM A370
BS EN ISO 15630
ISO 6892
AS 1391
1.5 Kg 300 $ 29/06/2020 06/08/2020
www.inspeedglobal.com [email protected]+90 553 775 16 48@InspeedGlobal 11
Metallic Materials Testing
PT program No. Month
Material Test Test method Samples
Price USD
Samples Dispatch
date
Final PT report date
Month Material Test Test method Samples Price
USD
Samples Dispatch
date
Final PT report date
PT-MET-20-023 August Metallic material
Metallic materials - Rockwell hardness test
(HRC &HRB)
ASTM E18
BS EN ISO 6508 250 gm 300 $ 25/08/2020 05/11/2020
PT-MET-20-024 August Metallic material
Metallic materials - Brinell hardness test
ASTM E10
BS EN ISO 6506 0.5 Kg 300 $ 25/08/2020 05/11/2020
PT-MET-20-025 August Metallic material
Standard Test Methods for Notched Bar Impact
Testing of Metallic Materials
ASTM E23
ASTM A370
BS EN ISO 148
AS 1544
200 gm 300 $ 25/08/2020 05/11/2020
PT-MET-20-019 June
Steel – Round
samples
metallic material- Tensile testing (Round Samples)
ASTM E8/E8M
ASTM A370
BS EN ISO 15630
ISO 6892
AS 1391 BS 4449:2005
1.5 Kg 300 $ 29/06/2020 06/08/2020
PT-MET-20-020 July
Steel- metallic material
Test method-Bend test
ASTM E190
ASTM E290
ASTM A370
3 bars 300 $ 28/07/2020 05/10/2020
PT-MET-20-021 July
Steel - metallic material
metallic material- Tensile testing at ambient
temperature
ASTM E8/E8M
ASTM A370
BS EN ISO 15630
ISO 6892
AS 1391 BS 4449:2005
3 bars 300 $ 28/07/2020 05/10/2020
PT-MET-20-022 July Metallic material
Metallic materials - Vickers hardness test
ASTM E92
BS EN ISO 6507 250 gm 300 $ 28/07/2020 05/10/2020
www.inspeedglobal.com [email protected]+90 553 775 16 48@InspeedGlobal 12
Metallic Materials Testing
PT program No. Month
Material Test Test method Samples
Price USD
Samples Dispatch
date
Final PT report date
Month Material Test Test method Samples Price
USD
Samples Dispatch
date
Final PT report date
www.inspeedglobal.com [email protected]+90 553 775 16 48@InspeedGlobal 13
Metallic Materials Testing
PT program No. Month
Material Test Test method Samples
Price USD
Samples Dispatch
date
Final PT report date
PT-MET-20-026 September
Carbon and low alloy
Steel
Determination of chemical composition of
using Spark optical Emission Method
ASTM 415 250 gm 300 $ 28/09/2020 05/11/2020
PT-MET-20-027 September Stainless
steel
Determination of chemical composition of
using Spark optical Emission Method
ASTM E1086 250 gm 300 $ 28/09/2020 05/11/2020
PT-MET-20-028 September Cast Iron
Determination of chemical composition of
using Spark optical Emission Method
ASTM E1999 250 gm 300 $ 28/09/2020 05/11/2020
PT-MET-20-029 September Cupper alloys
Determination of chemical composition of
using Spark optical Emission Method
BS EN ISO 15079 250 gm 300 $ 28/09/2020 05/11/2020
PT-MET-20-030 September Aluminum
alloys
Determination of chemical composition of
using Spark optical Emission Method
ASTM E1251 250 gm 300 $ 28/09/2020 05/11/2020
PT-NDT-20-304 November Non
Destructive testing
Standard Practice for Liquid Penetrant
Examination for General Industry
ASTM E165/E165M/ ASME 0 Sec. V 5 Kg 700 $ 25/11/2020 05/01/2021
Month Material Test Test method Samples Price
USD
Samples Dispatch
date
Final PT report date
www.inspeedglobal.com [email protected]+90 553 775 16 48@InspeedGlobal 14
Metallic Materials Testing
PT program No. Month
Material Test Test method Samples
Price USD
Samples Dispatch
date
Final PT report date
PT-MET-20-305 November Non
Destructive testing
Standard Guide for Magnetic Particle
Testing
ASTM E709/ ASME 0 Sec. V 5 Kg 700 $ 25/11/2020 05/01/2021
PT-NDT-20-306 November Non
Destructive testing
Determination of ultrasonic pulse velocity BS EN 12504 Part 4 5 Kg 700 $ 25/11/2020 05/01/2021
PT-MET-20-031 December Steel – Flat
samples
metallic material- Tensile testing (Flat samples)
ASTM E8/E8M
ASTM A370
BS EN ISO 15630
ISO 6892
AS 1391 BS 4449:2005
1.5 Kg 300 $ 28/12/2020 08/02/2021
PT-MET-20-032 December
Steel – Round
samples
metallic material- Tensile testing (Round Samples)
ASTM E8/E8M
ASTM A370
BS EN ISO 15630
ISO 6892
AS 1391 BS 4449:2005
1.5 Kg 300 $ 28/12/2020 08/02/2021
PT programs for the year 2020
2020
Non-Destructive Testing (NDT)
Month Material Test Test method Samples Price
USD
Samples Dispatch
date
Final PT report date
www.inspeedglobal.com [email protected]+90 553 775 16 48@InspeedGlobal 15
Non-Destructive Testing (NDT)
PT program No. Month
Material Test Test method Samples
Price USD
Samples Dispatch
date
Final PT report date
PT-NDT-20-301 May
Non Destructive
testing
Standard Practice for Liquid Penetrant
Examination for General Industry
ASTM E165/E165M/
ASME 0 Sec. V 5 Kg 700 $ 28/05/2020 01/08/2020
PT-NDT-20-302 May
Non Destructive
testing
Standard Guide for Magnetic Particle
Testing
ASTM E709/ ASME
0 Sec. V 5 Kg 700 $ 28/05/2020 01/08/2020
PT-NDT-20-303 May
Non Destructive
testing
Determination of ultrasonic pulse velocity
BS EN 12504 Part 4 5 Kg 700 $ 28/05/2020 01/08/2020
PT-NDT-20-304 November
Non Destructive
testing
Standard Practice for Liquid Penetrant
Examination for General Industry
ASTM E165/E165M/ ASME 0 Sec. V 5 Kg 700 $ 25/11/2020 05/01/2021
PT-MET-20-305 November
Non Destructive
testing
Standard Guide for Magnetic Particle
Testing
ASTM E709/ ASME 0 Sec. V 5 Kg 700 $ 25/11/2020 05/01/2021
PT-NDT-20-306 November
Non Destructive
testing
Determination of ultrasonic pulse velocity BS EN 12504 Part 4 5 Kg 700 $ 25/11/2020 05/01/2021
PT programs for the year 2020
2020
Calibration Testing
www.inspeedglobal.com [email protected]+90 553 775 16 48@InspeedGlobal 16
Calibration Pro�ciency Testing/ Inter-lab Comparison
Inspeed Global is accredited according to ISO/IEC 17043 standard to provide the following Pro�ciency Testing programs:
Weight Calibration of Balances
Mass Calibration of Mass
Pressure Calibration of Hydraulic/Pneumatic Pressure Gauges
Dimensional Calibration of Outside Micrometers
Temperature Calibration of PT-100 Thermometers with Indicators
Volume Calibration of Micro Pipettes
AC/DC Voltage; AC/DC
Current; Resistance
Calibration of Digital Multimeters
PT programs for the year 2020
2020
Customized PT Programs
www.inspeedglobal.com [email protected]+90 553 775 16 48@InspeedGlobal 17
Customized PT Programs
We provide customized PT programs according to the needs of your lab scope of testing which
comply with the international requirements of ISO/IEC 17043 and ISO 13528 in the following scope
of testing:
Polymers testing08.
Glass testing07.
Ceramic & tilestesting
06.Paints testing
05.
Textile testing04.
Metals testing03.
Minerals Testing02.Precious Metals
Testing
01.
www.inspeedglobal.com [email protected]+90 553 775 16 48@InspeedGlobal 18
3 On Time with AccurateReports
2 Saving your Money and Time
4 High Quality and Well-controlled Samples
1 Totally understands your needs
5 24/7 is our service
WHY YOU CHOOSE PT
FROM IG:
www.inspeedglobal.com [email protected]+90 553 775 16 48@InspeedGlobal 19
SATISFACTORY RESULTS PACKAGE:The lab participates in the PT with satisfactory results will receive a formal certi�cate of Success in PT program issues by IG.
Registration for PT program
• Registration deadline for each programs is 20 days prior to dispatching of samples date.• For registration in a PT program please contact us at: [email protected] or via our website www.inspeedglobal.com
Shipping:Rates mentioned here are including the packaging cost but excluding the shipping charges. The actual cost of shipping will be paid by the participant along with PT fees.
Florida, USA
Göteborg, Sweden
Istanbul, Turkey
Doha, Qatar
Cairo, Egypt
Dubai, UAE
Muscat, Oman
IG Main Worldwide O�ces are in:
www.inspeedglobal.com [email protected]+90 553 775 16 48@InspeedGlobal 20
Inspeed Global – IG, is a worldwide conformity
assessment company that provides a wide range
of services including;
1- Proficiency Testing – PT,ISO/IEC 17043:2010
2- Inspection,
3- Personnel Certification,
4- Management System Certification,
5- Halal Certification,
6- Training,
7- Business Solutions and
8- Quality Software.
ABOUT US
IG offices and collaboration agreements are covering the whole regions of the world, for our main purpose is to be close to our customers everywhere.
IG Message:
Once Certified .. Globally Recognized
IG main strategic view is based on:IG Vision:To be one of the best and leading conformity assessment companies in the world specially in Proficiency Testing – PT, Personnel Certification and Inspection.
IG Mission:Inspeed Global – IG – is a worldwide company that has international offices in different regions and working under the values of Accuracy, Speed, Integration & Collaboration and Transparency, to deliver to its valuable and honorable customers the services of conformity assessment that includes; Proficiency Testing – PT, Inspection, Personnel Certification, Management System Certification, Halal Certification, Training, Business Solutions and Quality Software.
IG Values:1- Accuracy2- Speed3- Integration & Collaboration4- Transparency
www.inspeedglobal.com [email protected]+90 553 775 16 48@InspeedGlobal 21
For contact, register and any inquiry:
www.inspeedglobal.com E-Mail: [email protected]
Int. Marketing & Customer Relations:
+46 7 37 38 39 10 (Call & WhatsApp) +90 553 775 1648 (Calls)
English and Arabic conversations are available
+46 7 37 38 39 10+90 553 775 1648
