PROIN MAKE 2000MM X 2MM TO 12MM THICKNESS CUT TO …s3.amazonaws.com/machinetools_production/uploads/631058/1815_NEW... · SHANTHI INTERNATIONAL 19/20, Center Point, Indira Gandhi

SHANTHI INTERNATIONAL 19/20, Center Point, Indira Gandhi Road, Jamnagar 361008 (Gujarat) India.

Ph. +91-288-2555867/2556671/72 Fax. +91-288-2554254/2751388 Email:[email protected] Website: www.servoday.com

1

BY EMAIL/FAX TO: FROM:

DEAR CUSTOMER KIRIT MASURIA (DIRECTOR) SENDER’S REFERENCE NUMBER: DATE:

SI/1815. March 6, 2007. RE: TOTAL NO. OF PAGES INCLUDING COVER:

CTL/SLITTING LINE. 38 (THIRTY EIGHT)

OPTION – 1815/1 PROIN MAKE 2000MM X 2MM TO 12MM THICKNESS CUT TO LENGTH CUM SLITTING LINE: Price : EURO 850,000 As is where is.



2



3



4

Year 1999 - Present condition : machine in good working condition, actually under power. Technical data: Coil thickness 2-12 mm Max. coil width 2000 mm



5

Min. strip width 60 mm Max. strip length 8000 mm Line speed 10-20 m/min Line length 62 m Line width 8 m Main line's appliance: 1. Uncoiler made of PROIN type DCPA-T26/206,Prameters re following: - max coil weight 20 000 kg - max coil width 2050 mm - max coil diameter 2000 mm 2. Scissors made of PROIN type CGHP-12/206.Prameters are following: - cutting width 2050 mm - cutting thickness 12 mm 3. Streightening machine (leveller) made of PROIN type AFP-11-130/205 .Prameters are following: - number of rolls 11 - Max plate width 2050 mm - Plate thickness 3-12 mm - R max 65 kg/mm2 - Line speed 20 & 10 m/min 4. Rotary slitter made of PROIN 5. Waste receiver 6. Winder of cut Sheetmetal 7. Mechanical cutter 12x2000 8. Sheet metal store 9. Moveble receiver of package OPTION – 1815/2 PROIN MAKE 2050MM X 1.5MM TO 4MM THICKNESS CUT TO LENGTH CUM SLITTING LINE: Price : US DOLLAR 450,000 As is where is.



6



7



8



9



10

- Present condition : machine in good working condition, actually under power. - Manuals : available Main line's appliance: 1. Uncoiler



11

2.Straightening machine (Leveller),made of PROIN type AFP-17-62/205.Parameters are following: -number of rolls:17 -max plate width:2050mm -plate thickness:1.5-4mm - R max 65 kg/mm2 -Line speed:30 & 50 m/min 3. Rotary slitter made of PROIN type CSMP-4/205 , Prameters are following: - Max cutting width 2050 mm - Max cutting thickness 4 mm - R max 65 kg/mm2 . 4. Waste receiver 5.Winder of cut Sheetmatal. OPTION – 1815/3 ATECNIN 1500MM X 0.5MM TO 3.0MM THICKNESS CUT TO LENGTH LINE: Price : US DOLLAR 400,000 As is where is.



12



13



14

Technical Data Maker : ATECNIN Built in :1996 Strip width : max 1500 mm Strip thickness : 0.5 - 2.0 mm (3.0 mm)



15

Coil weight : 15/20 tons The line includes: Coil car Decoiler 6 Hi Leveller (21 rolls) – capacity 2000 mm wide (3 mm max), new in 2002 Shear Stacker (6 m long) Controls This line will be stopped and dismantled end of February / beginning March 2007 OPTION – 1815/4 PRO ECO/HERR VOSS CUT TO LENGTH LINE 1524MM X 3.18MM X 19.8 TONES: Price : US DOLLAR 750,000 As is where is.



16



17



18

TECHNICAL DATA MAKER: PRO ECO / HERR VOSS YEAR: 1990



19

MAIN DATA -COIL WIDTH: 60" (1524 mm) -COIL WEIGHT: 44,000 LBS.(19,800 kg) -COIL I.D.: 20" -24" (508 – 610 mm) -COIL O.D.: 84" (2133 mm) -GAUGE RANGE: STAINLESS 303 & 304: .030" TO .125" @40,000 PSI YIELD (0.762 -3.175 mm) MILD STEEL: .024" TO .125" @ 40,000 PSI YIELD (0.6 – 3.175 mm) ALUMINUM: .030" -.125" @ 32,000 PSI YIELD (0.762 – 3.175 mm) -LINE SPEED: 160 FPM (49 mpm) -SHEET LENGTH: 20' MAX. (6,096 mm) -BUNDLE WEIGHT: 10,000 LBS.(4,500 kg) -LINE DIRECTION: RIGHT TO LEFT CONSISTING OF THE FOLLOWING: -COIL CAR: MODEL FCC 44-84-48-60-28 ABOVE FLOOR DESIGN SELF CONTAINED HYDRAULICS 7.5 HP, 460V/3/60HZ 28" LIFT PENDANT CONTROL 13" OR 18" "V" TO FLOOR REMOVABLE SADDLE FOR SMALL O.D. COILS -UNCOILER: S/N: 5578-11-90 4 LEAF PUMPKIN TOOTH MANDREL, 61.250" FACE WIDTH 20" -24" COIL I.D. RANGE HYDRAULIC EXPANSION HYDRAULIC SLIDE BASE ATTACHED POWERED HOLDDOWN ROLL, HYD. MOTOR DRIVEN 18" WIDE X 10" DIA. RUBBER COVERED ROLL, W/BANDING SLOT 10 HP GE "KINAMATIC" DC DRIVE MOTOR, 1750 RPM, 500V, W/BLOWER, THRU SEW EURODRIVE REDUCER WITH 26.49:1 RATIO, SAF SOLID STATE DRIVE, MODEL DD312-40-4, S/N: Z0111, WITH HANDHELD PROGRAMMER BUILT-IN HYD. POWER UNIT, 10HP, 1750 RPM 48" FROM FLOOR TO CENTER OF MANDREL -THREADING TABLE: MODEL PB.125-60-84 S/N: 5578-13-90 HYD. LIFT & RETRACT -ENTRY STAND: MODEL PRSG-7.5-60 S/N: 5578-14-90 DRIVEN PINCH ROLLS 7" DIA. X 66" FACE NEOPRENE COVERED



20

MANUAL ADJ. EDGE GUIDES COMMON DRIVE W/LEVELLER -LEVELLER: HERR VOSS KEYSTONE 6 HI DESIGN MODEL: 66/1.750-19/7 6 HI RH SERIAL NUMBER: 15394 19 WORK ROLLS 1.750" DIA. X 66" FACE ROLLS 7 FLIGHTS OF BACK-UP ROLLS 5 FLIGHTS ARE MOTORIZED 60 HP BALDOR AC MOTOR, 1760 RPM, 230/460V, WER DC CLUTCH/BRAKE, 1690/130 RPM, THRU CONE DRIVE RIGHT ANGLE REDUCER W/5:1 RATIO -HUMP TABLE: ROWE MODEL HMP/SQ-60 S/N: 14968 MOTORIZED TABLE HEIGHT ADJUSTMENT MANUAL ADJ. SIDE GUIDES -VINYL APPLICATOR SIMCO MODEL ECS 30 ELECTRO-STATIC CHARGING SYSTEM -SHEAR: MODEL MCS.125-60 S/N: 5578-18-90 60" X .125" CAPACITY @50,000 PSI 240 RPM CRANK SPEED 40 CUTS PER MIN. MAX BOW TIE BLADE MANUAL BLADE GAP ADJUSTMENT THRU SCREWJACKS MECHANICAL DOWN CUT DESIGN AIR OPERATED SHEET HOLDDOWN CLAMP AIR CLUTCH AND BRAKE 20 HP AC MOTOR, 1150 RPM, 230/460V -RUNOUT CONVEYOR AND MEASURING DEVICE: ROWE MODEL CVR-PS-60-20 S/N: 14970 CAPACITY: 60" WIDE @ 20FT. LONG 12" WIDE @ 6" LONG POSITIVE STOP MEASURING UNIT MOTORIZED BELT CONVEYOR -AUTOMATIC SHEET STACKER: MODEL: ADS.125-60-240 S/N: 5578-20-90 WIDTH CAP.: 12" -66" 24" MAX. STACK HEIGHT 20' MAX. SHEET LENGTH CAM ROLLER TYPE FLIPPER ARMS AIR CYLINDER ACTUATED (2) AC MOTORS FOR WIDTH ADJUSTMENT AC MOTOR BACKSTOP ADJUSTMENT MOTORIZED SCISSOR LIFT TABLE 10,000# CAPACITY DRIVEN CONVEYOR ROLLS SIDE OR END DISCHARGE



21

(3) -14' L SECTIONS DRIVEN END DISCHARGE CONVEYOR, LAST PIECE TRAVERSING -DRIVEN CONVEYOR TRANSFER TABLE -VICKERS HYDRAULIC POWER UNIT 20HP LEESON AC MOTOR 1765 RPM, 203-230/460V -MAIN OPERATORS CONTROL PANEL -COMPLETE DRAWINGS AND OPERATOR/MAINTENANCE MANUALS INCLUDED -MISC. SPARE PARTS: ONE SET OF WORK ROLLS FOR LEVELLER ONE SET OF INTERMEDIATE ROLLS FOR LEVELLER ONE SET OF SPARE BLADES FOR SHEAR ONE SPARE RUBBER COVERED ROLL FOR UNCOILER MISC. ELECTRICAL ITEMS SPARE NEOPRENE ROLLERS FOR STACKER -VERY GOOD CONDITION The line is dismantled and stored in a warehouse OPTION – 1815/5 Slitting Line 0.3mm ~ 3mm t x 1524mm W x 15 Ton x 80 Meter/ Minute Carbon Steel Price : US DOLLAR 205,000 As is where is.

Under Operation Now and Installed. Built by Korean Maker in 1989 VS 37 KW Motor , 60 Hz, 380 Volt



22

Rewind of motor is required for 50 Hz. 1. Shaft Diameter / Arbor : 150mm 2. Knife : - 10mm t : 30 PCS - 15mm t : 30 PCS 3. Slitting Material 1) CR, GI, PO, EG... 2) Thickness ; 0.3 ~ 3mm x 1524mm W x 15 Ton 4. Speed : 80 MPM Max 5. Cuts - 0.5mm t : 20 ~ 25 Cuts - 3 mm t : 5 Cuts * Minimum Slit Width : 25mm 6. Line Direction : Left to Right OPTION – 1815/6 HERR VOSS 1520MM MULTI BLANKING LINE: Price : US DOLLAR 750,000 As is where is.



23



24



25



26



27



28



29

Material: CRS, Galvanized, Satin Coat, Pre-Painted, Aluminum, HR, CR. Thickness: 0.015: - 0.105” Yield Strength: 40,000 psi Mild Steel. Width: 12” – 60”. Line Speed: 225 FPM Coil capacity: 40,000 lbs Max. Coil O.D.: 72” Mandrel Expansion Range: 18”-22” Max. No. of Cuts/Blanks: 5/4 (Tooling available for 4 Cuts) Stacking Length Range: 10”-193” Max. Stacked Bundle Weight: 10,000 lbs Comprises: Entry Coil Conveyor ABS Entry Coil Car Built 1994, 40, lbs, 60” wide EMAG Uncoiler Built 1969 Upgraded to 40,000 lbs 1994 by ALCOS MACHINERY Variable Speed Paper Rewinding Capability Water Cooled Air Brake ABS MACHINERY Thread Up Stand



30

Built 1994 Peeler Pinch Rolls Modified 60” Wide Guide Rolls HERR VOSS Slitter 7-1/2” Diameter x 70” Wide Arbors 25 HP DC HERR VOSS Slitter Pusher & Set Up Stand Built 1994 Rotary Stand HERR VOSS Scrap Winders/Pusher Built 1994 ¾” Wide Max. 0.024” – 0.135” 30” O.D. VOSS Leveller with Pinch Rolls Built 1970 (Rebuilt 1994) 19-Roll 1.687” Diameter x 66” Long Work Rolls 7 Flights of Back-Up Rolls Loop Table/Quadrants Built 1994 66” Wide Rollers Herr Voss Roll Feed Unit with Side Guides Built 1989 64” Wide Herr Voss Shear Built 1989 64” Wide ABS MACHINERY Stacker Air Stacker with Blank Dividers and End Stops OPTION – 1815/7 BRONX CUT TO LENGTH LINE 2000MM X 0.75MM TO 4.5MM MILD STEEL: Price : GBP 375,000 As is where is. Year : 1972 Various Mechanical upgrades : 1990 to 1995



31



32



33



34

New Electrics : 1998 New main electrical panel. New Thyristor drive : 1998 Motor DC thyristor drive for 17 Roll leveler. Technical data: Cut to length sheets from Coil : CRS, Galv, Alloyed, MS, Stainless Steel. Material Thckness : 0.70mm to 4.5mm Mild Steel. Max. Material Width : 2000mm Max Coil Weight : 25 Tones. Cut lengths : 1000mm to 6000mm Pass line height : 1137mm above floor level. Complete with Coil Car, Uncoiler, Snubber Rolls, Peeler Unit, Entry Flattener, Pinch Rolls, Feed conveyor to leveler, 6 high Bronx 17 Rolls precision leveler, Work Roll Dia 76mm, Intermediate Roll Dia 50mm, Adjustment of bottom back up rolls is Motorised, Adjustment of head tilt also Motorised, Entry Pinch Rolls, Drive motor of 166 kw dc 1440 rpm 411A, Encoder unit for length measurement, Line shear Bigwood upcut mechnical shear with clutch/brake with spare shear blades, Power driven run out conveyor, Sheet piler and stacker Tilting type sheet piler with adjustable stop, c/w adjacent stacker with steel roller and ch-plate, Electric Main Panel, Control Desks, Hydraulic of Rexroth power and pump unit, Line direction Right to left, Line Speed Max. 30 Meters/Min. The line has been very well maintained and is in excellent working order and can be inspected in production on site. OPTION – 1815/8 SLITTING LINE ZAPPA MAKE 1250MM X 4MM X 15 TONES: Price : EURO 460,000 As is where is.



35



36

The line is under power.



37

Technical Data Make: ZAPPA Material : cold rolled steel, R. 42 kg/mm² Strip width : 1250 mm max Strip thickness : 0.5 – 4.0 mm Entry coil I.D. : 470 - 520 mm Entry coil O.D. : 1800 mm max Entry coil weight : 15 ton max Recoiler nominal drum diameter : 508 mm Line speed : 0 – 120 mpm Working direction : from right to left Slitter shaft diameter : 160 mm Slitter blades diameter : 320 mm max Decoiler drive : 30 kW - DC Slitter head drive : 55 kW – DC Recoiler drive : 76 kW - DC THE LINE INCLUDES - Mobile decoiler by hydraulic cylinder on the base frame for alignment - Hydraulic drum expansion and motorized for decoiling, pneumatic brake, - Hydraulic snubber roll motorized and rubberized. - Power pack unit fitted on the reel base frame. - Coil car, out floor type with hydraulic motor to drive 2 wheels for the horizontal

movement and other cylinder for vertical coil lifting. - Roll opener device composed of hydraulic tables to roll open (peeler) with pinch roll

motorized to pull the roll-head. - Pre-straightener 3 rolls type. - Hydraulic heading shear to cut the roll-head. - Entry adjustable guides of the head slitter for different strip width. - Double Head slitter pivoting on the base frame to change the old program cuts with

new already prepared. Hydraulic system for head-slitter lifting when the DC motor group goes back to free the "turret" with 4 shafts. Motorized vertical adjusting distance between both shafts (tooling holders)

- Idle rolls in exit of the head slitter as horizontal strips guides. - Scrap baller motorized with A.C. to rewind the scraps. Extraction of the scrap ball

when the hydraulic gearmotor goes back on the base guides. - Strip looping pit composed of : Set of idle rolls located in exit of the shear in entry of

the pit, as strip accumulator, other set of idle rolls is located in entry of the strip tension device. The pit is covered by 2 hydraulic tables to support the strips up to the recoiler clamp. After the blocking, the tilting tables go down in the pit and the plant can start to cut.

- Strip tension device with rubberized rolls to brake, adjustable, the strips in rewinding phase.

- Recoiler motorized by DC motor with: arm strip separator, strip clamp, drum expansion and push off actuated by power pack unit fitted on the reel base frame.



38

- Coil car, out floor type, same of the entry coil car but of large width to unload the strips.

- Double set of blades, iron and rubberized spacers for the double shear and for the arm strip separator of the recoiler. Tooling: how existing.

- Electric cabinet containing the drive controls for DC motors and other components. - Desk control to drive the commands of the line.

(SUBJECT TO AVAILABILITY AND GENERAL TERMS AND CONDITION OF SALE AVAILABLE ON REQUEST)

Documents

PROIN MAKE 2000MM X 2MM TO 12MM THICKNESS CUT TO …s3.amazonaws.com/machinetools_production/uploads/631058/1815_NEW... · SHANTHI INTERNATIONAL 19/20, Center Point, Indira Gandhi