INSTRUCTIONS TO STUDENTS FOR PR2JECT SEMESTER TRAINING SELECTION
OF INDUSTRY: 1. Give preference to Industries where you have been
placed during the campus recruitment.2. Select the Industry that
assigns viable projects, involving technical know-how, to the
students.3. Preference must be given to the Industries that have a
track record of absorbing the trainees after the c
training.4. Preference must be given to Industries that offer
stipend during the course of training, rather than industrie
fees for imparting training.5. Training in Industrial units that
simply provide the training certificates without imparting due
industrial expo
viable projects to the students.
ORIENTATION AT INDUSTRY: 1. First 2- 3 weeks of the training may
be devoted for orientation. The students may visit different plants
/units
of the industry. The students must learn the understanding of
the working environment and the technologiethe Industry.
2. Immediately after reporting in the Industry, the students
must inform the name of their Industrial Coordinathis/her contact
number, email ID, designation etc. to the Training Coordinator at
UCoE.
SELECTION OF PROJECT(S): 1. Students must work on projects that
should involve their technical know-how. The projects must b
consultation with the respective industrial supervisor.2. The
project may involve the existing industrial problem Viz. Scrap
reduction, Reliability & Productivity
Line balancing problem, Failure analysis, Improvement of
existing design/process/testing methods, Projeapplication of
Industrial engineering techniques such as SQC, Value Engg., TQM,
TPM etc.
3. The number of project(s) undertaken by the students must be
justifiable within the time frame of the project s
VISIT OF FACULTY COORDINATOR & SUBMISSION OF PROGRESS
REPORT: 1. During the course of training, the evaluation will be
done by the Faculty coordinator. The students must
respective coordinator regarding the schedule of visit.2. At the
time of visit, the students must give a brief presentation
regarding the project(s) undertaken and sh
written report regarding the same. The report (10-15 pages) must
include Introduction and Objective(s)undertaken, Methodology
adopted, Analysis procedure, Salient outcome of the
Project(s)/Status of the ongoi
3. The students must maintain a record of day to day activities
undertaken by them. This report will beevaluated by the faculty
coordinator during the said visit.
PREPERATION OF FINAL REPORT & FINAL EVALUATION AT THE
INSTITUTE: 1. On completion of the training, the students must
compile a detailed training report consisting of around
mainly focusing on the Project(s) undertaken. The report should
be hard bound and must include duly sicertificate issued by the
industry, acknowledgement, contents, a brief history of
organization, organization stof product (not more then 20-25
pages), Introduction and Objective(s) of Project(s) undertaken,
MethodoAnalysis procedure, Salient outcome of the Project(s). The
detailed guidelines for writing of the reportherewith
2. The students must prepare three copies of the training
report. One copy should be submitted in the Industryin the
Institute during the viva voce/presentation and the third copy may
be retained by the student for future
3. The students will be required to deliver a power point
presentation (consisting of around 30-40 slides) oduration at the
time of final evaluation/viva-voce examination in the institute.
The presentation should mainlyProject(s) undertaken by the students
and the salient contribution made by the students.
'RXEWVLIDQ\PD\EHFODULILHGZLWKHPDLODW(PDLO,'WUDLQLQJXFRH#JPDLOFRP
Enclosures:(1) Guidelines to students for writing of Project
Semester Training Report (2) Distribution of Marks and Schedule of
Project Semester Training
DECLARATION
I hereby declare that the project work entitled (Title of the
project(s)) is an authentic record of my own
work carried out at (NAME OF ORGANIZATION) as requirements of
project semester training (One
semester Industrial Training) for the award of degree of B.Tech.
(Mechanical Engineering), University
College of Engineering, Punjabi University, Patiala, under the
guidance of (Name of Industry coordinator)
and (Name of Faculty coordinator), during January to 0D\,
201).
(Signature of student)(Name of Student)
(Roll No.)
Date: ___________________
Certified that the above statement made by the student is
correct to the best of our knowledge and belief.
(Name & Designation) (Name & Designation) Faculty
Coordinator Industry Coordinator
CONTENTS OF THE REPORT
1. Cover page on hard paper2. Inner page same as cover page but
on the soft paper3. Declaration4. Acknowledgement5. Contents
x Summary/abstract (Maximum one page about the work content)x
Introduction (About the organization)x Project(s)
Title of the project (problem
identification)MethodologyImplementationResults (e.g. cost benefit
analysis)
x Conclusions and Future Scope of Workx References (if any)
6. Impediments/difficulties faced during project semester on
project work; Suggestions related towork/project semester.
NOTE:
Please note the case of letters in the cover page. The 3rd. line
is 16 pt bold and other lines are 12 pt. Thepage is centered.
Department and Institute names are bold.
The matter contained in the report should be typed in MS word
(1.5 spacing) Times New Roman (useFont Size 12 pt for Text and 14
pt for Headings) or equivalent with other software.
Figures and tables may be inserted in the text as they appear or
may be appended in order.
List of references shall be appended at the end.
Subject matter should be typed on both sides.
A total of THREE HARD BOUND copies may be prepared: One for the
student, second forthe industry coordinator and third for the
institute.
