3
METAL MAILBOX AND WOOD POST Bring your mailbox to life by applying Krylon ® Dual ® Superbond ® Paint + Primer. INSTRUCTIONS Remove mailbox from post. MAILBOX: Wrap mailbox flag with painter’s tape to protect it from the paint. Using an all-purpose cleaner, thoroughly clean the mailbox to remove dirt, oils and dust. Rinse thoroughly with water and allow mailbox to dry. If paint or rust is flaking off the surface, use a wire brush or sandpaper to remove it. Wipe clean. Applying in a well-ventilated area, hold can of Krylon Dual Superbond Satin Hunter Green 6-8 inches from the surface and paint using a sweeping side-to-side motion with slight overlap. Allow paint to dry for 30-60 seconds. SKILL LEVEL PROJECT TIME 1 hour MATERIALS Krylon ® Dual ® Superbond ® Gloss White (post) Satin Hunter Green (mailbox) Drop cloth Painter’s tape Tack cloth Screwdriver All-purpose cleaner Medium grit sandpaper or wire brush (optional) 1 2 3 4 5 1 2 3 4 5 page 1 of 3 (continued on next page)

PROJECT TIME SKILL LEVEL - Krylon

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: PROJECT TIME SKILL LEVEL - Krylon

METAL MAILBOX AND WOOD POST

Bring your mailbox to life by applying Krylon® Dual® Superbond® Paint + Primer.

INSTRUCTIONS

Remove mailbox from post.

MAILBOX:

Wrap mailbox flag with painter’s tape to protect it from the paint.

Using an all-purpose cleaner, thoroughly clean the mailbox to remove dirt, oils and dust. Rinse thoroughly with water and allow mailbox to dry.

If paint or rust is flaking off the surface, use a wire brush or sandpaper to remove it. Wipe clean.

Applying in a well-ventilated area, hold can of Krylon Dual Superbond Satin Hunter Green 6-8 inches from the surface and paint using a sweeping side-to-side motion with slight overlap.

Allow paint to dry for 30-60 seconds.

SKILL LEVEL

PROJECT TIME

1 hour

MATERIALS

Krylon® Dual® Superbond® Gloss White (post) Satin Hunter Green (mailbox)

Drop cloth

Painter’s tape

Tack cloth

Screwdriver

All-purpose cleaner

Medium grit sandpaper or wire brush (optional)

1

2

3

4

5

1 2 3 4 5

page 1 of 3

(continued on next page)

Page 2: PROJECT TIME SKILL LEVEL - Krylon

INSTRUCTIONS (continued)

Continue to apply light, multiple coats, waiting 30-60 seconds between each, until you are satisfied with the appearance.

Make sure the mailbox is completely dry before you remove the painter’s tape from the flag.

POST:

Wash the post with an all-purpose cleaner to remove dirt and debris. Rinse thoroughly with water and allow to dry.

Applying in a well-ventilated area, hold can of Krylon Dual Superbond Gloss White 6-8 inches from the surface and paint using a sweeping side-to-side motion with slight overlap.

7

6

8

9

METAL MAILBOX AND WOOD POST

Bring your mailbox to life by applying Krylon® Dual® Superbond® Paint + Primer.

page 2 of 3

SKILL LEVEL

PROJECT TIME

1 hour

1 2 3 4 5

(continued on next page)

Page 3: PROJECT TIME SKILL LEVEL - Krylon

INSTRUCTIONS (continued)

Allow paint to dry for 30-60 seconds.

Continue to apply light, multiple coats, waiting 30-60 seconds between each, until you are satisfied with the appearance.

Krylon Dual Superbond dries in 25 minutes or less, and can be handled in about one hour.

You may wish to wait a few hours before reattaching the mailbox to the post.

11

13

10

12

METAL MAILBOX AND WOOD POST

Bring your mailbox to life by applying Krylon® Dual® Superbond® Paint + Primer.

page 3 of 3

SKILL LEVEL

PROJECT TIME

1 hour

1 2 3 4 5