Projector PA622U/PA522U PA672W/PA572W PA722X/ · PDF fileProjector PA622U/PA522U. PA672W/PA572W PA722X/PA622X. User’s Manual. ... , NEC will not be responsible for any claims on

Projector

PA622U/PA522U PA672W/PA572W PA722X/PA622XUser’s Manual

Model No.NP-PA622U/NP-PA522U/NP-PA672W/NP-PA572W/NP-PA722X/NP-PA622X

Ver. 1 1/2014

• Apple,Mac,MacOS,andMacBookaretrademarksofAppleInc.registeredintheU.S.andothercountries.

• Microsoft,Windows,WindowsVista, InternetExplorer, .NETFrameworkandPowerPointareeitheraregisteredtrademarkortrademarkofMicrosoftCorporationintheUnitedStatesand/orothercountries.

• MicroSaverisaregisteredtrademarkofKensingtonComputerProductsGroup,adivisionofACCOBrands.

• Adobe,AdobePDF,AdobeReader,andAcrobatareeitherregisteredtrademarksortrademarksofAdobeSystemsIncorporatedintheUnitedStatesand/orothercountries.

• VirtualRemoteToolusesWinI2C/DDClibrary,©NicomsoftLtd.

• HDMI,theHDMILogoandHigh-DefinitionMultimediaInterfacearetrademarksorregisteredtrademarksofHDMILicensingLLC.

• DisplayPortandDisplayPortComplianceLogoaretrademarksownedbytheVideoElectronicsStandardsAssocia-tion.

• TrademarkPJLinkisatrademarkappliedfortrademarkrightsinJapan,theUnitedStatesofAmericaandothercountriesandareas.

• Wi-Fi®,Wi-FiAlliance®,andWi-FiProtectedAccess(WPA,WPA2)®are registered trademarksof theWi-FiAlli-ance.

• Blu-rayisatrademarkofBlu-rayDiscAssociation

• CRESTRONandROOMVIEWareregisteredtrademarksofCrestronElectronics,Inc.intheUnitedStatesandothercountries.

• Otherproductandcompanynamesmentionedinthisuser’smanualmaybethetrademarksorregisteredtrademarksoftheirrespectiveholders.

NOTES(1)Thecontentsofthisuser’smanualmaynotbereprintedinpartorwholewithoutpermission.

(2)Thecontentsofthisuser’smanualaresubjecttochangewithoutnotice.

(3)Greatcarehasbeentakeninthepreparationofthisuser’smanual;however,shouldyounoticeanyquestionablepoints,errorsoromissions,pleasecontactus.

(4)Notwithstandingarticle(3),NECwillnotberesponsibleforanyclaimsonlossofprofitorothermattersdeemedtoresultfromusingtheProjector.

i

Important InformationSafety CautionsPrecautionsPleasereadthismanualcarefullybeforeusingyourNECprojectorandkeepthemanualhandyforfuturereference.

CAUTIONToturnoffmainpower,besuretoremovetheplugfrompoweroutlet.Thepoweroutletsocketshouldbeinstalledasneartotheequipmentaspossible,andshouldbeeasilyaccessible.

CAUTIONTOPREVENTSHOCK,DONOTOPENTHECABINET.THEREAREHIGH-VOLTAGECOMPONENTSINSIDE.REFERSERVICINGTOQUALIFIEDSERVICEPERSONNEL.

Thissymbolwarnstheuserthatuninsulatedvoltagewithintheunitmaybesufficienttocauseelectricalshock.Therefore,itisdangeroustomakeanykindofcontactwithanypartinsideoftheunit.

Thissymbolalertstheuserthatimportantinformationconcerningtheoperationandmaintenanceofthisunithasbeenprovided.Theinformationshouldbereadcarefullytoavoidproblems.

WARNING:TOPREVENTFIREORSHOCK,DONOTEXPOSETHISUNITTORAINORMOISTURE.DONOTUSETHISUNIT’SPLUGWITHANEXTENSIONCORDORINANOUTLETUNLESSALLTHEPRONGSCANBEFULLYINSERTED.

DOC Compliance Notice (for Canada only)ThisClassBdigitalapparatuscomplieswithCanadianICES-003.

Machine Noise Information Regulation - 3. GPSGV,Thehighestsoundpressurelevelislessthan70dB(A)inaccordancewithENISO7779.

CAUTIONAvoiddisplayingstationaryimagesforaprolongedperiodoftime.DoingsocanresultintheseimagesbeingtemporarilysustainedonthesurfaceoftheLCDpanel.Ifthisshouldhappen,continuetouseyourprojector.Thestaticbackgroundfrompreviousimageswilldisappear.

Disposing of your used product

EU-widelegislationasimplementedineachMemberStaterequiresthatusedelectricalandelectronicprod-uctscarryingthemark(left)mustbedisposedofseparatelyfromnormalhouseholdwaste.Thisincludesprojectorsandtheirelectricalaccessoriesorlamps.Whenyoudisposeofsuchproducts,pleasefollowtheguidanceofyourlocalauthorityand/orasktheshopwhereyoupurchasedtheproduct.Aftercollectingtheusedproducts,theyarereusedandrecycledinaproperway.Thiseffortwillhelpusreducethewastesaswellasthenegativeimpactsuchasmercurycontainedinalamptothehumanhealthandtheenvironmentattheminimumlevel.ThemarkontheelectricalandelectronicproductsonlyappliestothecurrentEuropeanUnionMemberStates.

ii

Important Information

WARNING TO CALIFORNIA RESIDENTS:Handlingthecablessuppliedwiththisproductwillexposeyoutolead,achemicalknowntotheStateofCaliforniatocausebirthdefectsorotherreproductiveharm.WASHHANDSAFTERHANDLING.

RF Interference (for USA only)

WARNINGTheFederalCommunicationsCommissiondoesnotallowanymodificationsorchangestotheunitEXCEPTthosespecifiedbyNECDisplaySolutionsofAmerica,Inc.inthismanual.Failuretocomplywiththisgovernmentregu-lationcouldvoidyourrighttooperatethisequipment.ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttoPart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates,uses,andcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradiocommunications.However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures:

• Reorientorrelocatethereceivingantenna.• Increasetheseparationbetweentheequipmentandreceiver.• Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected.• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

ForUKonly:InUK,aBSapprovedpowercordwithmouldedplughasaBlack(fiveAmps)fuseinstalledforusewiththisequipment.Ifapowercordisnotsuppliedwiththisequipmentpleasecontactyoursupplier.

Important SafeguardsThesesafetyinstructionsaretoensurethelonglifeofyourprojectorandtopreventfireandshock.Pleasereadthemcarefullyandheedallwarnings.

Installation• Donotplacetheprojectorinthefollowingconditions:- onanunstablecart,stand,ortable.- nearwater,baths,ordamprooms.- indirectsunlight,nearheaters,orheatradiatingappliances.- inadusty,smokyorsteamyenvironment.- onasheetofpaperorcloth,rugsorcarpets.• Ifyouwishtohavetheprojectorinstalledontheceiling:- Donotattempttoinstalltheprojectoryourself.- Theprojectormustbeinstalledbyqualifiedtechniciansinordertoensureproperoperationandreducetheriskofbodilyinjury.- Inaddition,theceilingmustbestrongenoughtosupporttheprojectorandtheinstallationmustbeinaccordancewithanylocalbuildingcodes.- Pleaseconsultyourdealerformoreinformation.

iii


WARNING• Donotcoverthelenswiththelenscaporequivalentwhiletheprojectorison.Doingsocanleadtomeltingofthecapduetotheheatemittedfromthelightoutput.

• Donotplaceanyobjects,whichareeasilyaffectedbyheat,infrontoftheprojectorlens.Doingsocouldleadtotheobjectmeltingfromtheheatthatisemittedfromthelightoutput.

Donotusetheprojectorwithitleaningtotheleftandright.Thismayresultinamalfunction.However,portraitinstal-lationispossible*(whenacustom-designedstandismade).Forportraitinstallation,installtheprojectorwiththeairintakeatthebottomandleaveaspaceofatleast130mmbelowtheairintake.

130 mm or more

Fire and Shock Precautions • Ensurethatthereissufficientventilationandthatventsareunobstructedtopreventthebuild-upofheatinsideyourprojector.Allowenoughspacebetweenyourprojectorandawall.(→pagevii)• Donottrytotouchtheventilationoutletontheleftfront(whenseenfromthefront)asitcanbecomeheatedwhiletheprojectoristurnedonandimmediatelyaftertheprojectoristurnedoff.Partsoftheprojectormaybecometem-porarilyheatediftheprojectoristurnedoffwiththePOWERbuttonoriftheACpowersupplyisdisconnectedduringnormalprojectoroperation. Usecautionwhenpickinguptheprojector.

• Preventforeignobjectssuchaspaperclipsandbitsofpaperfromfallingintoyourprojector.Donotattempttoretrieveanyobjectsthatmightfallintoyourprojector.Donotinsertanymetalobjectssuchasawireorscrewdriverintoyourprojector.Ifsomethingshouldfallintoyourprojector,disconnectitimmediatelyandhavetheobjectremovedbyaqualifiedservicepersonnel.• Donotplaceanyobjectsontopoftheprojector.• Donottouchthepowerplugduringathunderstorm.Doingsocancauseelectricalshockorfire.• Theprojectorisdesignedtooperateonapowersupplyof100-240VAC50/60Hz.Ensurethatyourpowersupplyfitsthisrequirementbeforeattemptingtouseyourprojector.• Donotlookintothelenswhiletheprojectorison.Seriousdamagetoyoureyescouldresult.

• Keepanyitems(magnifyingglassetc.)outofthelightpathoftheprojector.Thelightpathbeingprojectedfromthelensisextensive,thereforeanykindofabnormalobjectsthatcanredirectlightcomingoutofthelens,cancauseanunpredictableoutcomesuchasafireorinjurytotheeyes.• Donotplaceanyobjects,whichareeasilyaffectedbyheat,infrontofaprojectorexhaustvent. Doingsocouldleadtotheobjectmeltingorgettingyourhandsburnedfromtheheatthatisemittedfromtheex-haust.

iv


• Handlethepowercordcarefully.Adamagedorfrayedpowercordcancauseelectricshockorfire.- Donotuseanypowercordotherthantheonesuppliedwiththeprojector.- Donotbendortugthepowercordexcessively.- Donotplacethepowercordundertheprojector,oranyheavyobject.- Donotcoverthepowercordwithothersoftmaterialssuchasrugs.- Donotheatthepowercord.- Donothandlethepowerplugwithwethands.• Turnofftheprojector,unplugthepowercordandhavetheprojectorservicedbyaqualifiedservicepersonnelunderthefollowingconditions:- Whenthepowercordorplugisdamagedorfrayed.- Ifliquidhasbeenspilledintotheprojector,orifithasbeenexposedtorainorwater.- Iftheprojectordoesnotoperatenormallywhenyoufollowtheinstructionsdescribedinthisuser’smanual.- Iftheprojectorhasbeendroppedorthecabinethasbeendamaged.- Iftheprojectorexhibitsadistinctchangeinperformance,indicatinganeedforservice.• Disconnectthepowercordandanyothercablesbeforecarryingtheprojector.• Turnofftheprojectorandunplugthepowercordbeforecleaningthecabinetorreplacingthelamp.• Turnofftheprojectorandunplugthepowercordiftheprojectorisnottobeusedforanextendedperiodoftime.• WhenusingaLANcable: Forsafety,donotconnecttotheconnectorforperipheraldevicewiringthatmighthaveexcessivevoltage.

CAUTION• Donotusethetilt-footforpurposesotherthanoriginallyintended.Misusessuchasgrippingthetilt-footorhang-ingonthewallcancausedamagetotheprojector.• Donotsendtheprojectorinthesoftcasebyparceldeliveryserviceorcargoshipment.Theprojectorinsidethesoftcasecouldbedamaged.• Select[HIGH]inFanmodeifyoucontinuetousetheprojectorforconsecutivedays.(Fromthemenu,select[SETUP]→[OPTIONS(1)]→[FANMODE]→[MODE]→[HIGH].)• Donotmovetheprojectorbyholdingthecablecover.Doingsomayresult intheprojectorfallingorcausinginjury.• Donotunplugthepowercablefromthewalloutletorprojectorwhentheprojectorispoweredon.DoingsocancausedamagetotheACINconnectoroftheprojectorand(or)theprongplugofthepowercable. ToturnofftheACpowersupplywhentheprojectorispoweredon,useapowerstripequippedwithaswitchandabreaker.• DonotturnofftheACpowerfor60secondsafterthelampisturnedonandwhilethePOWERindicatorisblink-ingblue.Doingsocouldcauseprematurelampfailure.

Caution on Handling the Optional LensWhenshippingtheprojectorwiththelens,removethelensbeforeshippingtheprojector.Alwaysattachthedustcaptothelenswheneveritisnotmountedontheprojector.Thelensandthelensshiftmechanismmayencounterdamagecausedbyimproperhandlingduringtransportation.Donotholdthelenspartwhencarryingtheprojector.Doingsocouldcausethefocusringtorotate,resultinginaccidentaldroppingoftheprojector.

Remote Control Precautions• Handletheremotecontrolcarefully.• Iftheremotecontrolgetswet,wipeitdryimmediately.• Avoidexcessiveheatandhumidity.• Donotshort,heat,ortakeapartbatteries.• Donotthrowbatteriesintofire.• Ifyouwillnotbeusingtheremotecontrolforalongtime,removethebatteries.• Ensurethatyouhavethebatteries’polarity(+/−)alignedcorrectly.• Donotusenewandoldbatteriestogether,orusedifferenttypesofbatteriestogether.• Disposeofusedbatteriesaccordingtoyourlocalregulations.

v


Note for US ResidentsThelampinthisproductcontainsmercury.PleasedisposeaccordingtoLocal,StateorFederalLaws.

Lamp Replacement• Usethespecifiedlampforsafetyandperformance.• Toreplacethelamp,followallinstructionsprovidedonpage142.• Besuretoreplacethelampandfilterwhenthemessage[THE LAMP HAS REACHED THE END OF ITS USABLE

LIFE. PLEASE REPLACE THE LAMP AND FILTER. USE THE SPECIFIED LAMP FOR SAFETY AND PERFOR-MANCE.]appears.Ifyoucontinuetousethelampafterthelamphasreachedtheendofitsusablelife,thelampbulbmayshatter,andpiecesofglassmaybescatteredinthelampcase.Donottouchthemasthepiecesofglassmaycauseinjury. Ifthishappens,contactyourdealerforlampreplacement.

A Lamp CharacteristicTheprojectorhasahigh-pressuremercurylampasalightsource.Alamphasacharacteristicthatitsbrightnessgraduallydecreaseswithage.Alsorepeatedlyturningthelamponandoffwillincreasethepossibilityofitslowerbrightness.

CAUTION:• DONOTTOUCHTHELAMPimmediatelyafterithasbeenused.Itwillbeextremelyhot.Turntheprojectoroffandthendisconnectthepowercord.Allowatleastonehourforthelamptocoolbeforehandling.• Whenremovingthelampfromaceiling-mountedprojector,makesurethatnooneisundertheprojector.Glassfragmentscouldfallifthelamphasbeenburnedout.

About High Altitude mode• Set[FANMODE]to[HIGHALTITUDE]whenusingtheprojectorataltitudesapproximately5249feet/1600metersorhigher. Usingtheprojectorataltitudesapproximately5249feet/1600metersorhigherwithoutsettingto[HIGHALTITUDE]cancausetheprojectortooverheatandtheprotectorcouldshutdown.Ifthishappens,waitacoupleminutesandturnontheprojector.• Usingtheprojectorataltitudeslessthanapproximately5249feet/1600metersandsettingto[HIGHALTITUDE]cancausethelamptoovercool,causingtheimagetoflicker.Switch[FANMODE]to[AUTO].• Usingtheprojectorataltitudesapproximately5249feet/1600metersorhighercanshortenthelifeofopticalcom-ponentssuchasthelamp.

About Copyright of original projected pictures:Pleasenotethatusingthisprojectorforthepurposeofcommercialgainortheattractionofpublicattentioninavenuesuchasacoffeeshoporhotelandemployingcompressionorexpansionofthescreenimagewiththefollowingfunc-tionsmayraiseconcernabouttheinfringementofcopyrightswhichareprotectedbycopyrightlaw.[ASPECTRATIO],[KEYSTONE],Magnifyingfeatureandothersimilarfeatures.

Turkish RoHS information relevant for Turkish marketEEE Yönetmeliğine Uygundur.

Thisdeviceisnotintendedforuseinthedirectfieldofviewatvisualdisplayworkplaces.Toavoidincommodingreflec-tionsatvisualdisplayworkplacesthisdevicemustnotbeplacedinthedirectfieldofview.

vi


Health precautions to users viewing 3D images

Beforeviewing,besuretoreadhealthcareprecautionsthatmaybefoundintheuser’smanualincludedwithyour3Deyeglassesoryour3DcompatiblecontentsuchasBlu-rayDiscs,videogames,computer’svideofilesandthelike.Toavoidanyadversesymptoms,heedthefollowing:• Donotuse3Deyeglassesforviewinganymaterialotherthan3Dimages.• Allowadistanceof2m/7feetorgreaterbetweenthescreenandauser.Viewing3Dimagesfromtoocloseadistancecanstrainyoureyes.• Avoidviewing3Dimagesforaprolongedperiodoftime.Takeabreakof15minutesorlongeraftereveryhourofviewing.• Ifyouoranymemberofyourfamilyhasahistoryoflight-sensitiveseizures,consultadoctorbeforeviewing3Dimages.• Whileviewing3Dimages,ifyougetsicksuchasnausea,dizziness,queasiness,headache,eyestrain,blurryvision,convulsions,andnumbness,stopviewingthem.Ifsymptomsstillpersist,consultadoctor.• View3Dimagesfromthefrontofthescreen.Viewingfromananglemaycausefatigueoreyestrain.

Power management functionInordertokeeppowerconsumptionlow,thefollowingpowermanagementfunctions(1)and(2)havebeensetwhenshippedfromthefactory.Pleasedisplaytheon-screenmenuandchangethesettings(1)and(2)accordingtotheaimofusingtheprojector.

1. STANDBY MODE (Factory preset: NORMAL)

• When[NORMAL]isselectedfor[STANDBYMODE],thefollowingconnectorsandfunctionswillnotwork:

HDMIOUTconnector,AUDIOOUTconnector,Ethernet/HDBaseTPort,USB-APort,LANfunctions,MailAlertfunction

(→page114)

2. AUTO POWER OFF (Factory preset: 60 minutes)

• When[1:00]isselectedfor[AUTOPOWEROFF],youcanenabletheprojectortoautomaticallyturnoffin1hourifthereisnosignalreceivedbyanyinputorifnooperationisperformed.

(→page115)

vii


Clearance for Installing the ProjectorAllowampleclearancebetweentheprojectoranditssurroundingsasshownbelow.Thehightemperatureexhaustcomingoutofthedevicemaybesuckedintothedeviceagain.AvoidinstallingtheprojectorinaplacewhereairmovementfromtheHVACisdirectedattheprojector.HeatedairfromtheHVACcanbetakeninbytheprojector'sintakevent.Ifthishappens,thetemperatureinsidetheprojectorwillrisetoohighcausingtheover-temperatureprotectortoautomaticallyturnofftheprojectorspower.

Example 1 – If there are walls on both sides of the projector.

20cm/7.9"orgreater 13cm/5.1"orgreater

Filtercover(Ventilation(inlet))

Lampcover

NOTE:The drawing shows the proper clearance required for the front, back and top of the projector.

Example 2 – If there is a wall behind the projector.

10cm/3.9"orgreater

Ventilation(outlet)

NOTE:The drawing shows the proper clearance required for the back, sides and top of the projector.

Example 3 – In the case of portrait projection.

Filtercover(Ventilation(inlet))

13cm/5.1"orgreater

NOTE:• Thedrawingshowstheproperclearancerequiredforthefront,backandtopoftheprojector.• Seepage134 for an installation example on portrait projection.

viii

Table of ContentsImportant Information ............................................................................................ i

1. Introduction ...........................................................................................................1❶What’sintheBox? ..........................................................................................................1❷IntroductiontotheProjector ...........................................................................................2

CongratulationsonYourPurchaseoftheProjector ..................................................2Installation .................................................................................................................2Videos .......................................................................................................................2Network .....................................................................................................................3Energy-saving ...........................................................................................................3Maintenance .............................................................................................................3Aboutthisuser’smanual ...........................................................................................4

❸PartNamesoftheProjector ...........................................................................................5Front/Top ...................................................................................................................5Rear ..........................................................................................................................6ControlPanel/IndicatorSection ................................................................................7TerminalPanelFeatures ...........................................................................................8

❹PartNamesoftheRemoteControl ................................................................................9BatteryInstallation ..................................................................................................10RemoteControlPrecautions ...................................................................................10OperatingRangeforWirelessRemoteControl .......................................................11

2. Projecting an Image (Basic Operation) ...............................................12❶FlowofProjectinganImage .........................................................................................12❷ConnectingYourComputer/ConnectingthePowerCord ..............................................13❸TurningontheProjector ...............................................................................................14

NoteonStartupscreen(MenuLanguageSelectscreen) .......................................15❹SelectingaSource .......................................................................................................16

Selectingthecomputerorvideosource..................................................................16❺AdjustingthePictureSizeandPosition ........................................................................18

Adjustingtheverticalpositionofaprojectedimage(Lensshift) .............................19Focus ......................................................................................................................20Applicablelens:NP30ZL .........................................................................................21Applicablelens:NP11FL .........................................................................................22Zoom .......................................................................................................................23AdjustingtheTiltFeet .............................................................................................23

❻OptimizingComputerSignalAutomatically ..................................................................24AdjustingtheImageUsingAutoAdjust ...................................................................24

❼TurningUporDownVolume .........................................................................................24❽TurningofftheProjector ...............................................................................................25❾AfterUse.......................................................................................................................26

3. Convenient Features ......................................................................................27❶TurningofftheImageandSound .................................................................................27❷FreezingaPicture ........................................................................................................28❸EnlargingaPicture .......................................................................................................28❹ChangingEcoMode/CheckingEnergy-SavingEffectUsingEcoMode[ECO

MODE] ....................................................................................................................29

ix

Table of Contents

CheckingEnergy-SavingEffect[CARBONMETER] ..............................................30❺UsingtheOptionalRemoteMouseReceiver(NP01MR) .............................................31❻CorrectingHorizontalandVerticalKeystoneDistortion[CORNERSTONE] .................33❼PreventingtheUnauthorizedUseoftheProjector[SECURITY] ..................................36❽Projecting3Dvideos.....................................................................................................39

Proceduretowatch3Dvideosusingthisprojector .................................................39Whenvideoscannotbeviewedin3D .....................................................................41

❾ControllingtheProjectorbyUsinganHTTPBrowser ..................................................42

4. Multi-Screen Projection ...............................................................................48❶Thingsthatcanbedoneusingmulti-screenprojection ................................................48

Case1.Usingasingleprojectortoprojecttwotypesofvideos[PIP/PICTUREBYPICTURE] .........................................................................................................48Case2.Usingfourprojectors(liquidcrystalpanel:XGA)toprojectvideoswitharesolutionof1920×1080pixels[TILING]............................................................49Thingstonotewheninstallingprojectors ................................................................51

❷DisplayingTwoPicturesattheSameTime ...................................................................52Projectingtwoscreens ............................................................................................53Switchingthemaindisplaywiththesub-displayandviceversa .............................54Restrictions .............................................................................................................55

❸DisplayingaPictureUsing[EDGEBLENDING] ...........................................................56Settingtheoverlapofprojectionscreens ................................................................57BlackLevelAdjustment ...........................................................................................60

5. Using On-Screen Menu .................................................................................62❶UsingtheMenus ...........................................................................................................62❷MenuElements .............................................................................................................63❸ListofMenuItems ........................................................................................................64❹MenuDescriptions&Functions[INPUT] ......................................................................70

1:HDMI1 ..................................................................................................................702:HDMI2 ..................................................................................................................703:DisplayPort ...........................................................................................................704:BNC .....................................................................................................................705:BNC(CV) ..............................................................................................................706:BNC(Y/C) .............................................................................................................707:COMPUTER ........................................................................................................708:HDBaseT .............................................................................................................70ENTRYLIST ...........................................................................................................70TESTPATTERN ......................................................................................................70

❺MenuDescriptions&Functions[ADJUST] ...................................................................74[PICTURE] ..............................................................................................................74[IMAGEOPTIONS] .................................................................................................78[VIDEO] ...................................................................................................................82[3DSETTINGS] ......................................................................................................84

❻MenuDescriptions&Functions[DISPLAY] ..................................................................85[PIP/PICTUREBYPICTURE] .................................................................................85[GEOMETRICCORRECTION] ...............................................................................87[EDGEBLENDING] ................................................................................................91[MULTISCREEN]....................................................................................................92

x

Table of Contents

❼MenuDescriptions&Functions[SETUP] .....................................................................94[MENU] ...................................................................................................................94[INSTALLATION] .....................................................................................................96[CONTROL] ............................................................................................................99[NETWORKSETTINGS] .......................................................................................107[SOURCEOPTIONS] ...........................................................................................112[POWEROPTIONS] .............................................................................................114ReturningtoFactoryDefault[RESET] ..................................................................116

❽MenuDescriptions&Functions[INFO.] .....................................................................118[USAGETIME] ......................................................................................................118[SOURCE(1)] ........................................................................................................119[SOURCE(2)] ........................................................................................................119[WIREDLAN] ........................................................................................................119[VERSION(1)] .......................................................................................................120[OTHERS] .............................................................................................................120[CONDITIONS] .....................................................................................................121[HDBaseT] ............................................................................................................122

6. Connecting to Other Equipment ...........................................................123❶Mountingalens(soldseparately) ...............................................................................123

Mountingthelens..................................................................................................123Removingthelens ................................................................................................124

❷MakingConnections ...................................................................................................125AnalogRGBsignalconnection .............................................................................125DigitalRGBsignalconnection ..............................................................................126ConnectinganExternalMonitor ...........................................................................129ConnectingYourBlu-rayPlayerorOtherAVEquipment .......................................130ConnectingComponentInput ...............................................................................131ConnectingHDMIInput.........................................................................................132ConnectingtoaHDBaseTtransmissiondevice(soldcommercially) ....................133Portraitprojection(verticalorientation) .................................................................134ConnectingtoaWiredLAN ..................................................................................137

7. Maintenance .....................................................................................................138❶CleaningtheFilters.....................................................................................................138❷CleaningtheLens.......................................................................................................141❸CleaningtheCabinet ..................................................................................................141❹ReplacingtheLampandtheFilters ............................................................................142

8. User Supportware ..........................................................................................147❶OperatingEnvironmentforSoftwareIncludedonCD-ROM .......................................147

NamesandFeaturesofBundledSoftwarePrograms ...........................................147Downloadservice .................................................................................................147OperatingEnvironment .........................................................................................147

❷InstallingSoftwareProgram .......................................................................................148InstallationforWindowssoftware ..........................................................................148

❸OperatingtheProjectorViatheLAN(VirtualRemoteTool) ........................................151ConnecttheprojectortoaLAN. ............................................................................152

❹ControllingtheProjectoroveraLAN(PCControlUtilityPro4/Pro5) ........................154

xi

Table of Contents

9. Appendix ..............................................................................................................158❶Throwdistanceandscreensize .................................................................................158

Lenstypesandthrowdistance .............................................................................158Tablesofscreensizesanddimensions ................................................................161Lensshiftingrange ................................................................................................162

❷CompatibleInputSignalList .......................................................................................164❸Specifications .............................................................................................................167❹CabinetDimensions ...................................................................................................169❺Mountingthecablecover(soldseparately) ................................................................170❻Pinassignmentsandsignalnamesofmainconnectors .............................................171❼Troubleshooting ..........................................................................................................173

IndicatorMessages ...............................................................................................173CommonProblems&Solutions ............................................................................175Ifthereisnopicture,orthepictureisnotdisplayedcorrectly. ...............................177

❽PCControlCodesandCableConnection ..................................................................178❾TroubleshootingCheckList .........................................................................................179

1

1. Introduction❶ What’s in the Box?Makesureyourboxcontainseverythinglisted.Ifanypiecesaremissing,contactyourdealer.Pleasesavetheoriginalboxandpackingmaterialsifyoueverneedtoshipyourprojector.

Projector

Dustcapforlens* Theprojectorisshippedwithout

alens.Forthetypesoflensandthrowdistances,seepage158.

Remotecontrol(7N900961)

AAalkalinebatteries(x2)

Inputselectionchar-acterseal

Powercord(US:7N080241)(EU:7N080022)

Lenstheftpreventionscrew(24V00841)Thisscrewmakesitdifficulttoremovethelensmountedontheprojector.(→page124)

Straps(24J23901)(forpreventinglampcoverfromfalling)Attachingthestrapstothelampcoverpreventsthemfromfallingwhentheprojectorissuspendedfromtheceiling.

For North America onlyRegistrationcardLimitedwarrantyFor customers in Europe: YouwillfindourcurrentvalidGuar-anteePolicyonourWebSite:www.nec-display-solutions.com

• ImportantInfomation(ForNorthAmerica:7N8N4121)(ForOthercountriesthanNorthAmerica:7N8N4121and7N8N4131)

• QuickSetupGuide(ForNorthAmerica:7N8N4141)(ForOthercountriesthanNorthAmerica:7N8N4141and7N8N4151)

NECProjectorCD-ROMUser’smanual(PDF)andtheutilitysoftware(7N951971)

2

1. Introduction

❷ Introduction to the ProjectorThissectionintroducesyoutoyournewprojectoranddescribesthefeaturesandcontrols.

Congratulations on Your Purchase of the ProjectorThisprojectorisoneoftheverybestprojectorsavailabletoday.Theprojectorenablesyoutoprojectpreciseimagesupto500inchesacross(measureddiagonally)fromyourPCorMaccomputer(desktopornotebook),VCR,Blu-rayplayer,ordocumentcamera.Youcanusetheprojectoronatabletoporcart,youcanusetheprojectortoprojectimagesfrombehindthescreen,andtheprojectorcanbepermanentlymountedonaceiling*1.Theremotecontrolcanbeusedwirelessly.

*1 Donotattempttomounttheprojectoronaceilingyourself.

Theprojectormustbeinstalledbyqualifiedtechniciansinordertoensureproperoperationandreducetheriskofbodilyinjury.

Inaddition,theceilingmustbestrongenoughtosupporttheprojectorandtheinstallationmustbeinaccordancewithanylocalbuildingcodes.Pleaseconsultyourdealerformoreinformation.

Installation

• Liquidcrystaltypehighbrightness/highresolutionprojector

Model Brightness Resolution AspectRatio

PA622U 6200lm WUXGA(1920×1200) 16:10

PA522U 5200lm WUXGA(1920×1200) 16:10

PA672W 6700lm WXGA(1280×800) 16:10

PA572W 5700lm WXGA(1280×800) 16:10

PA722X 7200lm XGA(1024×768) 4:3

PA622X 6200lm XGA(1024×768) 4:3

• Widerangeofoptionallensesselectableaccordingtotheplaceofinstallation

Thisprojectorsupports6typesofoptionallenses,providingaselectionoflensesadaptedtoavarietyofplacesofinstallationandprojectionmethods.

Inaddition,thelensescanbemountedandremovedinonetouch.

Notethatnolensismounteduponshipmentfromthefactory.Pleasepurchaseoptionallensesseparately.

• Lensshiftfunctionforeasilyadjustingthepositionoftheprojectedimage

Thepositionoftheprojectedimageismovedbyturningthetwodialsontheprojector’sfront,onefortheverticaldirection,oneforthehorizontaldirection.

• 360°installationangle(tilt-free)

Theprojectorcanbeinstalledatanyangle(360°).

Note,however,thatthe“fanmode”settingmustbechangedaccordingtotheangleofinstallation.

Also,theprojectorcannotbeinstalledtiltedtotheleftorright.

• Portraitprojectionispossible

Thisprojectorcanperformportraitprojectionwiththeprojectionscreenturned90°.

However,thelampreplacementtime*is2000hoursforportraitprojection.

* Replacementtimenotguaranteed.

Videos

• Widerangeofinput/outputconnectors(HDMI,DisplayPort,BNC,etc.)andbuilt-inmonauralspeaker

Theprojectorisequippedwithavarietyofinput/outputconnectors:HDMI(input×2,output×1),DisplayPort,BNC(5-core),computer(analog),etc.

Theprojector’sHDMIinput/outputconnectorsandDisplayPortinputconnectorsupportHDCP.

Theprojectorisalsoequippedwithabuilt-in10Wmonauralspeaker.

3

1. Introduction

• EquippedwithHDBaseTinputterminal

ThisprojectorisequippedwithaHDBaseTinputterminalwhichcanbeconnectedtoaHDBaseTtransmissiondevicesoldcommercially.

HDBaseTisaconnectionstandardforhomeappliancesthatisestablishedbytheHDBaseTAlliance.

• Simultaneousdisplayof2images(PIP/PICTUREBYPICTURE)

Twoimagescanbeprojectedsimultaneouslywithasingleprojector.

Therearetwotypesoflayoutsforthetwoimages:“picture-in-picture”inwhichasub-pictureisdisplayedonthemainpicture,and“picture-by-picture”inwhichthemainandsubpicturesaredisplayednexttoeachother.

• Multi-screenprojectionusingmultipleprojectors

ThisprojectorisequippedwithmultipleHDMIinput&outputterminalsthatcanconnectmultipleprojectorsinadigitalchain.Ahighqualitypictureisachievedbydividingandprojectinghighresolutionvideosamongthevariousprojectors.

Furthermore,theboundariesofthescreensaresmoothedusinganedgeblendingfunction.

• Seamlessswitchfunctionforsmootherscreenchangeswhenswitchingthesignal

Whentheinputconnectorisswitched,theimagedisplayedbeforeswitchingisheldsothatthatthenewimagecanbeswitchedtowithoutabreakduetoabsenceofasignal.

• SupportsHDMI3Dformat

Thisprojectorcanbeusedtowatchvideosin3Dusingcommercially-availableactiveshutter-type3Deyewearand3DemittersthatsupportXpand3D.

Network

• Convenientutilitysoftware(UserSupportware)providedasstandard

ThethreeutilitysoftwarestoredintheenclosedNECProjectorCD-ROM(VirtualRemoteTool,PCControlUtilityPro4(forWindows)andPCControlUtilityPro5(forMacOS))canbeused.ThefollowingthreeutilitysoftwareontheCD-ROMcannotbeused.

ImageExpressUtilityLite(forWindows/MacOS),ImageExpressUtility2.0(forWindows)andDesktopControlUtility1.0(forWindows)

Energy-saving

• Energy-saving design with a standby power consumption of 0.11 watts (100-130V)/0.16 watts (200-240V)

Whentheon-screenmenu’sstandbymodeissetto“NORMAL”,thepowerconsumptioninthestandbymodeis0.11watts.

• “Ecomode”forlowpowerconsumptionand“CarbonMeter”display

Theprojector is equippedwith an“ecomode” for reducingpower consumptionduringuse.Furthermore, thepower-savingeffectwhentheecomodeissetisconvertedintotheamountofreductionsofCO2emissionsandthisisindicatedontheconfirmationmessagedisplayedwhenthepoweristurnedoffandat“Information”ontheon-screenmenu(CARBONMETER).

Maintenance

• Maximumlampreplacementtimeof4000hoursandnoneedtocleanthefilters

Whenusedintheecomode,thelampreplacementtime*isextendedtoamaximumof4000hours.

*Thistimeisnotguaranteed.

Furthermore,thisprojectoruseslarge2-layerfilters.Whenthesefiltersarereplacedwithnewoneswhenchangingthelamp,thereisnoneedforregularfiltercleaning.

4

1. Introduction

About this user’s manualThefastestwaytogetstartedistotakeyourtimeanddoeverythingrightthefirsttime.Takeafewminutesnowtoreviewtheuser’smanual.Thismaysaveyoutimelateron.Atthebeginningofeachsectionofthemanualyou’llfindanoverview.Ifthesectiondoesn’tapply,youcanskipit.

5

1. Introduction

❸ Part Names of the ProjectorFront/TopThelensissoldseparately.ThedescriptionbelowisforwhentheNP13ZLlensismounted.

ControlPanel(→page7)

LensShiftDial(vertical/horizontal)(→page19)

Lens

RemoteSensor(locatedonthefrontandtherear)(→page11)

RemoteSensor(→page11)

ZoomLever/ZoomRing(→page23)

LensCap(Theoptionallensisshippedwiththelenscap.)

FocusRing(→page20)

AdjustableTiltFoot (→page23)

IndicatorSection(→page7)

Securinglevercover(→page135)

LensReleaseButton(→page124)

AdjustableTiltFoot(→page23)

Ventilation(outlet)Heatedairisexhaustedfromhere.

Mounting the strap1. Mount the strap to the filter cover and lamp cover as shown on the diagram below.

2. Insert the knot in the strap into the hole on the bottom of the projector and pull in the direction of the arrow to fasten.

a

b

Howtopastetheinputselectioncharacterstickeroftheremotecontrol• PeeloffthecoverofthestickerandalignthestickerholeswithButtons1to6beforepasting.

• Pleasetakecarenottoletthestickercontactthebuttonswhenpasting.

• Theexplanationsandillustrationsinthismanualareprovidedwiththestickerpasted.

LampCover(→page143)

SecurityBarAttachananti-theftdevice.

Thesecuritybaracceptssecuritywiresorchainsupto0.18inch/4.6

mmindiameter.

MonauralSpeaker(10W)

6

1. Introduction

TerminalPanel(→page8)

RearRemoteSensor(locatedonthefrontandtherear)(→page11)

ACInputConnectthesuppliedpowercord’sthree-pinplughere,andplugtheotherendintoanactivewalloutlet.(→page13)

* ThissecurityslotsupportstheMicroSaver®SecuritySystem.

Built-inSecuritySlot( )*

Cablecoverconnection (rightandleft)

Screwholesandgroovesfortheoptionalcablecover

(→page170)

Ventilation(inlet)/FilterCover(→page138,145)

Ventilation(outlet)Heatedairisexhaustedfromhere.

7

1. Introduction

Control Panel/Indicator Section

11 10

7

2 3 4 5 8 1

6

129

1. (POWER)Button (→page14,25)

2. POWER Indicator (→page13,14,25,173)

3. STATUS Indicator (→page173)

4. LAMP Indicator (→page142,174)

5. TEMP. Indicator (→page174)

6. INPUTButton (→page16)

7. AUTO ADJ. Button (→page24)

8. Geometric. Button (→page33)

9. MENU Button (→page62)

10.▲▼◀▶/VolumeButtons◀▶ (→page24,62)

11. ENTER Button (→page62)

12. EXIT Button (→page62)

8

1. Introduction

Terminal Panel Features

2 3112 8 910 11

7

4

5 15 1613 14 6

1. HDMI1INConnector(TypeA) (→page126,128,132,171)

2. HDMI2INConnector(TypeA) (→page126,128,132,171)

3. DisplayPortINConnector (→page126,171)

4. BNCIN[R/Cr/CV,G/Y/Y,B/Cb/C,H,V]Connec-tors(BNC×5)

(→page125,130)

5. BNC(CV)InputConnector(BNC×1) (→page130)

6. BNC(Y/C)InputConnector(BNC×2) (→page130)

7. BNCAUDIOINMiniJack(StereoMini) (→page128,130)

8. COMPUTERIN/ComponentInputConnector(MiniD-Sub15Pin)

(→page13,125)

9. COMPUTERAUDIOINMiniJack(StereoMini) (→page13,125)

10.Ethernet/HDBaseTPort(RJ-45) (→page133,172)

11.USB-APort(TypeA) (→page172) (Forfutureexpansion.Thisportallowsforpowersup-ply.)

12.HDMIOUTConnector(TypeA) (→page129)

13.AUDIOOUTMiniJack(StereoMini) (→page129)

14.3DSYNCConnector(MiniDIN4Pin) (→page39)

15.PCCONTROLPort(D-Sub9Pin) (→page172) Use this port to connect aPC or control system.Thisenablesyoutocontroltheprojectorusingserialcommunicationprotocol.Ifyouarewritingyourownprogram,typicalPCcontrolcodesareonpage178.

16.REMOTEConnector(StereoMini) Use this connector forwired remote control of theprojectorusingtheNECoptionalremotecontrol.

Connect the projector andoptional remote controlusingacommerciallyavailablewiredremotecontrolcable.

NOTE: • Whenaremotecontrolcable isconnectedtotheREMOTE

connector, infrared remote control operations cannot be performed.

• When [HDBaseT] is selected in the [REMOTE SENSOR]and the projector is connected to a commercially-available transmissiondevicethatsupportsHDBaseT,remotecontroloperations in infra-red cannot be carried out if transmission of remote control signals has been set up in the transmission device.However,remotecontrolusinginfraredrayscanbecarried out when the power supply of the transmission device is switched off.

9

1. Introduction

❹ Part Names of the Remote Control

8. TEST Button (→page70)

9. Edge Blend. Button (→page91)

10.Multi.Button (→page92)

11. Geometric. Button (→page33)

12. INPUT Button (→page16)

13. PIP Button (→page53)

14.PBP/POPButton (→page53)

15. AUTO ADJ. Button (→page24)

16.1(HDMI1)Button (→page16)

17.2(HDMI2)Button (→page16)

18.3(DisplayPort)Button (→page16)

19.4(BNC)Button (→page16)

20.5(BNC(CV))Button (→page16)

21.6(BNC(Y/C))Button (→page16)

22.7(Computer)Button (→page16)

23.8(HDBaseT)Button (→page16)

24.9(USB-A)Button (→page16)

25. ID SET Button (→page105)

26.NumericKeypadButton/CLEAR Button

(→page105)

27. MENU Button (→page62)

28. EXIT Button (→page62)

1. Infrared Transmitter (→page11)

2. POWER ON Button (→page14)

3. STANDBY Button (→page25)

4. FREEZE Button (→page28)

5. BLANKButton (→page27)

6. MUTEButton (→page27)

7. AV-MUTEButton (→page27)

29. ▲▼◀▶ Button (→page62)

30.ENTERButton (→page62)

31.L-CLICKButton* (→page32)

32.R-CLICKButton* (→page32)

33.VOL./FOCUS(+)(−)Button (→page24)

34.D-ZOOM/ZOOM(+)(−)Button (→page28) (“ZOOM”Buttondoesnotworkonthisseriesofprojectors)

35. SHUTTER Button (not available on this series ofprojectors)

36.LENSSHIFTButton (not available on this series ofprojectors)

37. PICTURE Button (→page74,76)

38. DISPLAY Button (→page85)

39. ASPECT Button (→page80)

40.COLORButton (→page76)

41. 3D Set. Button (→page39)

42. SETUP Button (→page94)

43. CTL Button (→page31,32)

44. ECO Button (→page29)

45. INFO Button (→page118)

46.HELPButton (→page118)

1

35489

1213

26711101514

16

1922

2523

17

27

31

33

35

30

21

28

29

20

32

2426

18

34

36

43

44

4645

374038

4241

39

* The▲▼◀▶,L-CLICKandR-CLICKbuttonsworkonlywhenaUSBcableisconnectedwithyourcomputer.

10

1. Introduction

Battery Installation1. Press the catch and remove

the battery cover.2. Install new ones (AA). En-

sure that you have the bat-teries’ polarity (+/−) aligned correctly.

3. Slip the cover back over the batteries until it snaps into place.

NOTE:Donotmixdifferenttypesofbatteriesornewand old batteries.

1

2 12

Remote Control Precautions

• Handletheremotecontrolcarefully.

• Iftheremotecontrolgetswet,wipeitdryimmediately.

• Avoidexcessiveheatandhumidity.

• Donotshort,heat,ortakeapartbatteries.

• Donotthrowbatteriesintofire.

• Ifyouwillnotbeusingtheremotecontrolforalongtime,removethebatteries.

• Ensurethatyouhavethebatteries’polarity(+/−)alignedcorrectly.

• Donotusenewandoldbatteriestogether,orusedifferenttypesofbatteriestogether.

• Disposeofusedbatteriesaccordingtoyourlocalregulations.

11

1. Introduction

Operating Range for Wireless Remote Control

40m/1575inch

40m/1575inch

Remotecontrol

Remotesensoronprojectorcabinet

40m/1575inch

40m/1575inch

20m/787inch

20m/787inch

20m/787inch

20m/787inch

15m/591inch

15m/591inch

15m/591inch

15m/591inch

• Theinfraredsignaloperatesbyline-of-sightuptoadistanceofabovemetersandwithina60-degreeangleoftheremotesensorontheprojectorcabinet.

• Theprojectorwillnotrespondifthereareobjectsbetweentheremotecontrolandthesensor,orifstronglightfallsonthesensor.Weakbatterieswillalsopreventtheremotecontrolfromproperlyoperatingtheprojector.

12

Thissectiondescribeshowtoturnontheprojectorandtoprojectapictureontothescreen.

❶ Flow of Projecting an Image

Step 1• Connectingyourcomputer/Connectingthepowercord(→ page 13)

Step 2 • Turningontheprojector(→ page 14)

Step 3 • Selectingasource(→ page 16)

Step 4• Adjustingthepicturesizeandposition(→ page 18)

• Correctingkeystonedistortion[KEYSTONE](→ page 33)

Step 5• Adjustingapictureandsound

- Optimizingacomputersignalautomatically(→page24)

- Turningupordownvolume(→page24)

Step 6• Makingapresentation

Step 7• Turningofftheprojector(→ page 25)

Step 8• Afteruse(→ page 26)

2. Projecting an Image (Basic Operation)

13


❷ Connecting Your Computer/Connecting the Power Cord

1. Connectyourcomputertotheprojector.

Thissectionwillshowyouabasicconnectiontoacomputer.Forinformationaboutotherconnections,see“(2)MakingConnections”onpage125.

Connectthedisplayoutputterminal(miniD-sub15pin)onthecomputertothecomputervideoinputterminalontheprojectorwithacommercially-availablecomputercable(withferritecore)andthenturntheknobsofthecon-nectorstosecurethem.

2. Connectthesuppliedpowercordtotheprojector.

Firstconnectthesuppliedpowercord’sthree-pinplugtotheACINoftheprojector,andthenconnecttheotherplugofthesuppliedpowercordinthewalloutlet.

Uponconnectingthepowercable,thePOWERindicatoroftheprojectorwilllightupinorange.Iftherearenoinputsignals,thedevicewillgointothestandbymodeafterabout10secondsandlightupinred*.

TheSTATUSindicatorwilllightoff*.

*Thiswillapplyforbothindicatorswhen[NORMAL]isselectedfor[STANDBYMODE].SeethePowerIndicatorsection.(→page173)

COMPUTER IN

MakesurethattheprongsarefullyinsertedintoboththeACINandthewalloutlet.

Towalloutlet

Computercable(withferritecore)(soldcommercially)

CAUTION:PartsoftheprojectormaybecometemporarilyheatediftheprojectoristurnedoffwiththePOWERbuttonoriftheACpowersupplyisdisconnectedduringnormalprojectoroperation.Usecautionwhenpickinguptheprojector.

14


Standby Blinking Power On

Steady red light Blinking blue light

Steady blue light

❸ Turning on the Projector

1. Remove the lens cap.

2. Press the (POWER) button on the projector cabinet or the POWER ON button on the remote control.

ThePOWERindicatorwill lightup inblue fromredandthenstartblinking.Afterthat,theimagewillbeprojectedontothescreen.

TIP: • Whenthemessage“PROJECTORISLOCKED!ENTERYOUR

PASSWORD.” is displayed, it means that the [SECURITY]feature is turned on. (→ page 36)

• When the ECO message is displayed, it means that [ON] isselectedfor[ECOMESSAGE].(→ page 95)

• PressingbuttonssuchaspowerbuttonandMENUbuttonwillmakesound.Toturnoffthebeepsound,select[OFF]for[BEEP]from the menu. (→ page 106)

Afteryouturnonyourprojector,ensurethatthecomputerorvideosourceisturnedon.

NOTE: A blue screen (blue background) is displayed when no signal is being input (by factory default menu settings).

(→page173)

15


Note on Startup screen (Menu Language Select screen)Whenyoufirstturnontheprojector,youwillgettheStartupmenu.Thismenugivesyoutheopportunitytoselectoneofthe29menulanguages.

Toselectamenulanguage,followthesesteps:

1. Use the ▲, ▼, ◀ or ▶ button to select one of the 29 languages from the menu.

2. Press the ENTER button to execute the selection.

After this has been done, you can proceed to themenuoperation.Ifyouwant,youcanselectthemenulanguagelater.(→[LANGUAGE]onpage66and94)

NOTE: • Duringprojection,aftershuttingdownthepowersupply(directpoweroff),waitforabout1minuteorlongerbeforeturningon

the power again.• Keepthelenscapoffthelenswhiletheprojector’spowerison. If the lens cap is on, it could be warped due to high temperature.• Ifoneofthefollowingthingshappens,theprojectorwillnotturnon.

- If the internal temperature of the projector is too high, the projector detects abnormal high temperature. In this condition the projectorwillnotturnontoprotecttheinternalsystem.Ifthishappens,waitfortheprojector’sinternalcomponentstocooldown.

- Whenthelampreachesitsendofusablelife,theprojectorwillnotturnon.Ifthishappens,replacethelamp.- IftheSTATUSindicatorlightsorangewiththepowerbuttonpressed,itmeansthatthe[CONTROLPANELLOCK]isturnedon.

Cancelthelockbyturningitoff.(→ page 104)- Ifthelampfailstolight,andiftheLAMPindicatorflashesonandoffinacycleofsixtimes,waitafullminuteandthenturnon

the power.• WhilethePOWERindicatorisblinkingblueinshortcycles,thepowercannotbeturnedoffbyusingthepowerbutton.• Immediatelyafterturningontheprojector,screenflickermayoccur.Thisisnormal.Wait3to5minutesuntilthelamplightingis

stabilized.• Whentheprojectoristurnedon,itmaytakesometimebeforethelamplightbecomesbright.• Ifyouturnontheprojectorimmediatelyafterthelampisturnedofforwhenthetemperatureishigh,thefansrunwithoutdisplay-

ing an image for some time and then the projector will display the image.

16


❹ Selecting a SourceSelecting the computer or video sourceNOTE: Turn on the computer or video source equipment connected to the projector.

DetectingtheSignalAutomaticallyPresstheINPUTbuttonfor1secondorlonger.Theprojectorwillsearchfortheavailableinputsourceanddisplayit.Theinputsourcewillchangeasfollows:

HDMI1→HDMI2→DisplayPort→BNC→BNC(CV)→BNC(Y/C)→ COMUPTER→HDBaseT→HDMI1→ …

• Pressitbrieflytodisplaythe[INPUT]screen.

Pressthe▼/▲buttonstomatchthetargetinputterminalandthenpresstheENTERbuttontoswitchtheinput.Todeletethemenudisplayinthe[INPUT]screen,presstheMENUorEXITbutton.

TIP: If no input signal is present, the input will be skipped.

Using the Remote ControlPress any oneof the 1/HDMI 1, 2/HDMI 2, 3/DisplayPort, 4/BNC, 5/BNC(CV),6/BNC(Y/C),7/Computer,or8/HDBaseTbuttons.

17


Selecting Default Source Youcansetasourceasthedefaultsourcesothatitwillbedisplayedeachtimetheprojectoristurnedon.

1. Press the MENU button.

Themenuwillbedisplayed.

2. Press the ▶buttontoselect[SETUP]andpressthe▼buttonortheENTERbuttontoselect[BASIC].

3. Press the ▶buttontoselect[SOURCEOPTIONS].

4. Press the ▼buttonfourtimestoselect[DEFAULTINPUTSELECT]andpresstheENTERbutton.

The[DEFAULTINPUTSELECT]screenwillbedisplayed.

(→page112)

5. Select a source as the default source, and press the ENTER button.

6. Press the EXIT button a few times to close the menu.

7. Restart the projector.

Thesourceyouselectedinstep5willbeprojected.

NOTE:Evenwhen[AUTO]isturnedon,the[HDBaseT]willnotbeautomaticallyselected.Tosetyournetworkasthedefaultsource,select[HDBaseT].

TIP: • WhentheprojectorisinStandbymode,applyingacomputersignalfromacomputerconnectedtotheCOMPUTERINinputwill

powerontheprojectorandsimultaneouslyprojectthecomputer’simage. ([AUTOPOWERONSELECT]→ page 115)• OntheWindows7keyboard,acombinationoftheWindowsandPkeysallowsyoutosetupexternaldisplayeasilyandquickly.

18


❺ Adjusting the Picture Size and PositionUsethelensshiftdial,theadjustabletiltfootlever,thezoomlever/zoomringandthefocusringtoadjustthepicturesizeandposition.Inthischapterdrawingsandcablesareomittedforclarity.

Adjusting theprojected image’sverticalandhorizontalposition[Lensshift](→page19)

Adjustingthefocus[Focusring](→page20)

Finelyadjustingthesizeofanimage[Zoomlever/Zoomring](→page21,23)

Adjusting the projected image’s height and horizontaltilt[Tiltfoot]*¹(→page23)

NOTE*1:Adjusttheprojectedimage’sheightusingthetiltfeetwhenyouwanttoprojecttheimageatapositionhigherthanthelensshift adjustment range.

19


Adjusting the vertical position of a projected image (Lens shift)

CAUTIONPerformtheadjustmentfrombehindorfromthesideoftheprojector.Adjustingfromthefrontcouldexposeyoureyestostronglightwhichcouldinjurethem.

Downward

Upward

Lensshiftdial(Horizontal)

Lensshiftdial(Vertical)

RightwardLeftward

• Turnthelensshiftdialsclockwiseorcounterclockwise.

VerticaldialTurnthisclockwiseorcounterclockwisetoadjusttheprojectionpositionintheverticaldirection.Approximateturningrange:About6turnscounterclockwise,about2turnsclockwisewhenthelensisatthecenterposition.

HorizontaldialTurnthisclockwiseorcounterclockwisetoadjusttheprojectionpositioninthehorizontaldirection.Approximateturningrange:About1 turncounterclockwise,about1 turnclockwisewhenthe lens isat thecenterposition.

NOTE:• Thedialscanbeturnedmorethanonefullturn,buttheprojectionpositioncannotbemovedmorethantherangeindicatedon

the following page.• Ifthelensisshiftedtothemaximuminthediagonaldirection,theedgesofthescreenwillbedarkorshaded.• Theverticalshiftadjustmentmustbefinishedwithanimageshiftedupward.Ifyoufinishtheverticalshiftadjustmentwithan

image shifted down, the zoom/focus adjustments or strong shaking may cause a projected image to slightly shift down.• ThelensshiftfunctioncannotbeusedwhenusingtheseparatelysoldNP11FLlens.

20


TIP: • ThediagrambelowshowsthelensshiftadjustmentrangeforthePA622UandPA522U(projectionmode:desktopfront).Toraise

the projection position higher than this, use the tilt feet. (→ page 23)• ForthePA672W/PA572W/PA722X/PA622Xandtheceilingmount/frontprojectionlensshiftadjustmentrange,seepage162,

163.

100%V

50%V

10%V100%H30%H 30%H

10%H 10%H

Heightofprojectedimage

Widthofprojectedimage

PA622U/PA522U

Descriptionofsymbols:Vindicatesvertical(heightoftheprojectedimage),Hindicateshorizontal(widthoftheprojectedim-age).

FocusApplicablelens:NP12ZL/NP13ZL/NP14ZL/NP15ZLUsetheFOCUSringtoobtainthebestfocus.

Focusring

21


Applicable lens: NP30ZLTheNP30ZLlensunitalignstheperipheralfocusaroundtheopticalaxis.

Peripheralfocusring

FocusRing

ZoomLever

1. Turn the focus ring left and right to align the focus around the optical axis.

* Thediagramshowsanexamplewhenthelensshiftismovedtothetop.Thetopofthescreenisadjusted.

Whenthelensisinthecenter,thecenterofthescreenisadjusted.

FocusRing

Opticalaxis

2. Turn the peripheral focus ring to the left and right to align the focus of the overall screen.

Atthispoint,thefocusaroundtheopticalaxisadjustedin(1)remainsunchanged. Peripheralfocus

ring

22


Applicable lens: NP11FLWiththeNP11FLlens,adjustthefocusandpicturedistortion.Preparations:Turnthelensshiftdials(verticalandhorizontal)ontheprojectortoreturnthelensshifttothecenter.Approximatelenscenterposition(explainedhereforthedesktopfrontprojectionmode)

Horizontal dial �� First turn the dial to the left edge, then turn it further so that the knob is horizontal� From this position, turn the dial 1 full turn clockwise�

Vertical dial �� First turn the dial to the bottom edge, then turn it further so that the knob is horizontal�From this position, turn the dial 2 full turns counterclockwise�

1. Turn the distortion ring to the left edge.

Distortionring

Lensshiftdials

2. Turn the focus lever clockwise and counterclockwise to adjust the focus at the center of the screen.

Focuslever

3. Use the distortion ring to correct the screen’s distor-tion.

(Thisalsobringstheedgesofthescreenintofocus.)

4. Use the focus lever to adjust the screen’s overall fo-cus.

* If thefocusat thecenterof thescreen isoff, turnthedistortionringalittlecounterclockwise.Thefocusatthecenterofthescreencannowbeadjustedwiththefocuslever.

23


Adjusting the Tilt Feet1. Turn the left and right tilt feet to adjust.

Thetiltfeetlengthenandshortenwhenturned.

Theheightoftheprojectedimageisadjustedbyturningtheleftandrighttiltfeet.

If theprojectedimageistilted,turnoneofthetilt feet toadjust theimagesothatitislevel.

• Iftheprojectedimageisdistorted,see“3-6CorrectingHorizontalandVerticalKeystoneDistortion[CORNERSTONE]”(→page33) and“[GEOMETRICCORRECTION]”(→page87).

• Thetiltfeetcanbelengthenedbyamaximumof20mm.

• Thetiltfeetcanbeusedtotilttheprojectorbyamaximumof4º.

NOTE:• Donotlengthenthetiltfeetanymorethan20mm/0.8".Doingsowillmakethe

tiltfeet’smountsectionunstableandcouldcausethetiltfeettocomeofftheprojector.

• Donotuse the tilt feet foranypurposeother thanadjusting theprojector’sprojection angle.

Handlingthetiltfeetimproperly,suchascarryingtheprojectorbygraspingthetilt feet or hooking it onto a wall using the tilt feet, could damage the projec-tor.

ZoomTurnthezoomleverorzoomringclockwiseandcounterclockwise.• TheseparatelysoldNP11FLlensdoesnothaveazoomring.

Zoomring

Up

Tiltfoot

Down

24


❻ Optimizing Computer Signal AutomaticallyAdjusting the Image Using Auto AdjustOptimizingacomputerimageautomatically.(COMPUTER/BNC(AnalogRGB))PresstheAUTOADJ.buttontooptimizeacomputerimageautomatically.Thisadjustmentmaybenecessarywhenyouconnectyourcomputerforthefirsttime.

[Poorpicture]

[Normalpicture]

NOTE:Somesignalsmaytaketimetodisplayormaynotbedisplayedcorrectly.• IftheAutoAdjustoperationcannotoptimizethecomputersignal,trytoadjust[HORIZONTAL],[VERTICAL],[CLOCK],and[PHASE]

manually. (→ page 78, 79)

❼ Turning Up or Down VolumeSoundlevelfromthespeakercanbeadjusted.

TIP:Whennomenusappear,the◀ and ▶ buttons on the projector cabinet work as a volume control.

NOTE:• Volumecontrolisnotavailablewiththe◀ or ▶ button when an image is enlarged

byusingtheD-ZOOM(+)buttonorwhenthemenuisdisplayed.

Increasevolume

Decreasevolume

25


❽ Turning off the Projector

To turn off the projector:1. First, press the (POWER) button on the projector

cabinet or the POWER OFF button on the remote con-trol.

The[POWEROFF/AREYOUSURE?/CARBONSAV-INGS-SESSION0.000[g-CO2]]messagewillappear.

2. Secondly, press the ENTER button or press the (POWER) or the POWER OFF button again.

Thelampwillgooffandthepowersupplywillbecut.Atthispoint,iftherearenoinputsignals,theprojectorwillgointo thestandbymodeafterabout10seconds.When instandbymode,thePOWERindicatorwilllightredandtheSTATUSindicatorwilllightoffwhen[NORMAL]isselectedfor[STANDBYMODE].

Power On

Steady blue light

Standby

Steady red lightPress twice

CAUTION:PartsoftheprojectormaybecometemporarilyheatediftheprojectoristurnedoffwiththePOWERbuttonoriftheACpowersupplyisdisconnectedduringnormalprojectoroperation.Usecautionwhenpickinguptheprojector.

NOTE:• WhilethePOWERindicatorisblinkingblueinshortcycles,thepowercannotbeturnedoff.• Youcannotturnoffthepowerfor60secondsimmediatelyafterturningitonanddisplayinganimage.• Donotunplugthepowercordfromtheprojectororfromthepoweroutletwhileanimageisbeingprojected.Doingsocould

deterioratetheprojector’sACinputconnectororthepowerplug’scontact.ToturnofftheACpowerwhileanimageisbeingprojected,usethepowerstrip’sswitch,thebreaker,etc.

• DonotdisconnecttheACpowersupplytotheprojectorwithin10secondsofmakingadjustmentorsettingchangesandclosingthemenu.Doingsocancauselossofadjustmentsandsettings.

26


❾ After UsePreparation:Makesurethattheprojectoristurnedoff.

1. Unplug the power cord.

2. Disconnect any other cables.

3. Mount the lens cap on the lens.

4. Before moving the projector, screw in the tilt feet if they have been lengthened.

27

❶ Turning off the Image and SoundTheprojectedvideoandtheoutputsoundfromtheinternalspeakerandsoundoutputterminalwilldisappearmomentarily.

PresstheBLANKbutton.Theprojectedvideowillbecutoff.

Press the MUTE button.Theprojectedaudiowillbecutoff.

PresstheAV-MUTEbutton.Theprojectedvideoandaudiowillbecutoff.

• Pressthebuttonsonemoretimeforthecancelledvideoandaudiotoappearagain. WhenAV-MUTEandBLANKarecontinuedforsometime,theenergy-savingfunctionwillactivatetolowerthelamppower.

NOTE: • When the AV-MUTE and BLANK buttons are pressed immediately after the

energy-saving function is activated, sometimes the brightness may not return to normal immediately.

TIP:• Thevideowilldisappearbutnotthemenudisplay.

3. Convenient Features

28


❷ Freezing a PicturePress theFREEZEbutton to freezeapicture.Pressagain to resumemotion.

NOTE: The image is frozen but the original video is still playing back.

❸ Enlarging a PictureYoucanenlargethepictureuptofourtimes.

NOTE:Themaximummagnificationmaybelessthanfourtimesdependingonthe signal.

Todoso:

1. Press the D-ZOOM (+) button to magnify the picture.

2. Press the ▲▼◀▶ button. Theareaofthemagnifiedimagewillbemoved

3. Press the D-ZOOM (−) button.

EachtimetheD-ZOOM(−)buttonispressed,theimageisreduced.

NOTE: • Theimagewillbeenlargedorreducedatthecenterofthescreen.• Displayingthemenuwillcancelthecurrentmagnification.

29


❹ Changing Eco Mode/Checking Energy-Saving Effect Using Eco Mode [ECO MODE]Thisfeatureenablesyoutoselecttwobrightnessmodesofthelamp:OFFandONmodes.Thelamplifecanbeextendedbyturningonthe[ECOMODE].

[ECOMODE] Description

[OFF] Thisisthedefaultsetting(100%Brightness).

[ON] Lowlamppowerconsumption(approx.80%Brightness).

Toturnonthe[ECOMODE],dothefollowing:1. PresstheECObuttonontheremotecontroltodisplay[ECOMODE]screen.

2. Use the ▲ or ▼buttontoselect[ON].

3. Press the ENTER button.

Tochangefrom[ON]to[OFF],GobacktoStep2andselect[OFF].RepeatStep3.

NOTE: • The[ECOMODE]canbechangedbyusingthemenu. Select[SETUP]→[INSTALLATION]→[LAMPMODE]→[ECOMODE].• Thelampliferemainingandlamphoursusedcanbecheckedin[USAGETIME].Select[INFO.]→[USAGETIME].• [ECOMODE]isalwayssetto[OFF]for1minuteimmediatelyafterthelampisturnedon.Thelampconditionwillnotbeaffected

evenwhen[ECOMODE]ischanged.• Afteralapseof1minutefromwhentheprojectordisplaysablue,blackorlogoscreen,[ECOMODE]willautomaticallyswitchto

[ON].• Iftheprojectorisoverheatedin[OFF]mode,theremaybeacasewherethe[ECOMODE]automaticallychangesto[ON]mode

toprotecttheprojector.Thisiscalled“ForcedECOMode”.WhentheprojectorisintheForcedEcoMode,thepicturebrightnessdecreasesslightlyandtheTEMP.indicatorlightsorange.AtthesametimetheThermometersymbol[ ]isdisplayedatthebot-tom right of the screen.

Whentheprojectorcomesbacktonormaltemperature,theForcedEcoModeiscancelledandthe[ECOMODE]returnsto[OFF]mode.

30


Checking Energy-Saving Effect [CARBON METER]Thisfeaturewillshowenergy-savingeffectintermsofCO2emissionreduction(kg)whentheprojector’s[ECOMODE]issetto[OFF],or[ON].Thisfeatureiscalledas[CARBONMETER].

Therearetwomessages:[TOTALCARBONSAVINGS]and[CARBONSAVINGS-SESSION].The[TOTALCARBONSAVINGS]messageshowsthetotalamountofCO2emissionreductionfromthetimeofshipmentuptonow.Youcanchecktheinformationon[USAGETIME]from[INFO.]ofthemenu.(→page118)

The[CARBONSAVINGS-SESSION]messageshowstheamountofCO2emissionreductionbetweenthetimeofchangingtoECOMODEimmediatelyafterthetimeofpower-onandthetimeofpower-off.The[CARBONSAVINGS-SESSION]messagewillbedisplayedinthe[POWEROFF/AREYOUSURE?]messageatthetimeofpower-off.

TIP:• TheformulaasshownbelowisusedtocalculatetheamountofCO2 emission reduction. AmountofCO2emissionreduction=(PowerconsumptioninOFFforECOMODE−PowerconsumptioninONforECOMODE)×

CO2conversionfactor.*WhentheimageisturnedoffwiththeAV-MUTEbuttontheamountofCO2 emmission reduction will also increase.* CalculationforamountofCO2emissionreductionisbasedonanOECDpublication“CO2EmissionsfromFuelCombustion,

2008Edition”.• The[TOTALCARBONSAVINGS]iscalculatedbasedonsavingsrecordedin15minutesintervals.• Thisformulawillnotapplytothepowerconsumptionwhichisnotaffectedbywhether[ECOMODE]isturnedonoroff.

31


❺ Using the Optional Remote Mouse Receiver (NP01MR)Theoptionalremotemousereceiverenablesyoutooperateyourcomputer’smousefunctionsfromtheremotecontrol.Itisagreatconvenienceforclickingthroughyourcomputer-generatedpresentations.

ConnectingtheremotemousereceivertoyourcomputerIfyouwishtousetheremotemousefunction,connectthemousereceiverandcomputer.Themousereceivercanbeconnecteddirectlytothecomputer’sUSBport(typeA).

NOTE:DependingonthetypeofconnectionorOSinstalledonyourcomputer,youmayhavetorestartyourcomputerorchangeyour computer settings.

When operating a computer via the remote mouse receiver

When connecting using the USB terminalForPC,themousereceivercanonlybeusedwithaWindowsXP*,WindowsVista,Windows7,orMacOSX10.0.0orlateroperatingsystem.

*NOTE:InSP1orolderversionofWindowsXP,ifthemousecursorwillnotmovecorrectly,dothefollowing:CleartheEnhancepointerprecisioncheckboxunderneaththemousespeedsliderintheMousePropertiesdialogbox[PointerOptionstab].

NOTE:WhenusingPowerPointforMacOS,theCTLbuttonandthepage▼/▲ buttons (page up and down) on the remote control will be disabled.

NOTE:Waitatleast5secondsafterdisconnectingthemousereceiverbeforereconnectingitandviceversa.Thecomputermaynotidentify the mouse receiver if it is repeatedly connected and disconnected in rapid intervals.

Remotemousereceiver

Computer

ToUSBportofPCorMac

Remotesensorontheremotemousereceiver

7m/22feet

32


Operatingyourcomputer’smousefromtheremotecontrolYoucanoperateyourcomputer’smousefromtheremotecontrol.

CTL Button + PAGE ▼/▲ Button �� scrolls the viewing area of the window or to move to the previous or next slide in PowerPoint on your

computer�▲▼◀▶ Buttons �� moves the mouse cursor on your computer�L-CLICK Button �� works as the mouse left button�R-CLICK Button �� works as the mouse right button�

NOTE:• Whenyouoperatethecomputerusingthe▲▼◀ or ▶ button with the menu displayed, both the menu and the mouse pointer

willbeaffected.Closethemenuandperformthemouseoperation.• WhenusingPowerPointforMacOS,theCTLbuttonandthepage▼/▲ buttons (page up and down) on the remote control will

be disabled.

About Drag Mode:BypressingtheL-CLICKorR-CLICKbuttonfor2or3secondsthenreleasing,thedragmodeissetandthedragoperationcanbeperformedsimplybypressingthe▲▼◀▶button.Todroptheitem,presstheL-CLICK(orR-CLICK)button.Tocancelit,presstheR-CLICK(orL-CLICK)button.

TIP:YoucanchangethePointerspeedontheMousePropertiesdialogboxontheWindows.Formoreinformation,seetheuserdocumentation or online help supplied with your computer.

33


❻ Correcting Horizontal and Vertical Keystone Distortion [COR-NERSTONE]

Usethe[CORNERSTONE]featuretocorrectkeystone(trapezoidal)distortiontomakethetoporbottomandtheleftorrightsideofthescreenlongerorshortersothattheprojectedimageisrectangular.

1. Press and hold the Geometric. button for a minimum of 2 seconds to reset current adjustments.

Currentadjustmentsfor[GEOMETRICCORRECTION]willbecleared.

2. Project an image so that the screen is smaller than the area of the raster.

Projectedimage

Thedrawingshowstheupperrightcorner.

3. Pick up any one of the corners and align the corner of the image with a corner of the screen.

4. Press the Geometric. button.

Displaythe[GEOMETRICCORRECTION]screenoftheon-screenmenu.

34


5. Press the ▼buttontoalignwiththe[CORNERSTONE]andthenpresstheENTERbutton.

Thedrawingshowstheupperlefticon( )isselected.

Thescreenwillswitchtothe[CORNERSTONE]screen.

NOTE:• Whena[GEOMETRICCORRECTION]functionotherthan[CORNERSTONE]hasbeensetup,the[CORNERSTONE]screenwill

notbedisplayed.Whenthescreenisnotdisplayed,eitherpresstheGeometric.buttonfor2ormoreseconds,orrun[RESET]in[GEOMETRICCORRECTION]tocleartheadjustmentvalueof[GEOMETRICCORRECTION].

6. Use the ▲▼◀▶ button to select one icon (▲) which points in the direction you wish to move the projected image frame.


8. Use the ▲▼◀▶ button to move the projected image frame as shown on the example.


10. Use the ▲▼◀▶ button to select another icon which points in the direction.

Onthe[CORNERSTONE]screen,select[EXIT]orpresstheEXITbuttonontheremotecontrol.

Theconfirmationscreenisdisplayed.

35


11. Press the ◀ or ▶buttontohighlightthe[OK]andpresstheENTERbutton.

Thiscompletesthe[CORNERSTONE]correction.

• Select[CANCEL]andpresstheENTERbuttontoreturntothe[CORNERSTONE]screen.

Selecting[CANCEL]willreturntotheadjustmentscreenwithoutsavingchanges(Step3).Selecting[RESET]willreturntothefactorydefault.Selecting[UNDO]willexitwithoutsavingchanges.

NOTE: • Evenwhentheprojectoristurnedon,thelastusedcorrectionvaluesareapplied.• Carryouteitheroneofthefollowingactionstocleartheadjustmentvalueof[CORNERSTONE].

• InStep11,select[RESET]andthenpresstheENTERbutton.• PresstheGeometric.buttonfor2ormoreseconds.• Run[DISPLAY]→[GEOMETRICCORRECTION]→[RESET]intheon-screenmenu.

• UsingCORNERSTONEcorrectioncancausetheimagetobeslightlyblurredbecausethecorrectionismadeelectronically.

36


❼ Preventing the Unauthorized Use of the Projector [SECURITY]AkeywordcanbesetforyourprojectorusingtheMenutoavoidoperationbyanunauthorizeduser.Whenakeywordisset,turningontheprojectorwilldisplaytheKeywordinputscreen.Unlessthecorrectkeywordisentered,thepro-jectorcannotprojectanimage.•The[SECURITY]settingcannotbecancelledbyusingthe[RESET]ofthemenu.

ToenabletheSecurityfunction:



2. Press the ▶ button twice to select [SETUP] and press the▼ button or the ENTER button to select [MENU].

3. Press the ▶buttontoselect[CONTROL].

4. Press the ▼buttonthreetimestoselect[SECURITY]andpresstheENTERbutton.

TheOFF/ONmenuwillbedisplayed.

5. Press the ▼buttontoselect[ON]andpresstheENTERbutton.

The[SECURITYKEYWORD]screenwillbedisplayed.

6. Type in a combination of the four ▲▼◀▶ buttons and press the ENTER button.

NOTE: A keyword must be 4 to 10 digits in length.

The[CONFIRMKEYWORD]screenwillbedisplayed.

NOTE:Makeanoteofyourpasswordandstoreitinasafeplace.

37


7. Type in the same combination of ▲▼◀▶ buttons and press the ENTER button.

Theconfirmationscreenwillbedisplayed.

8. Select[YES]andpresstheENTERbutton.

TheSECURITYfunctionhasbeenenabled.

To turn on the projector when [SECURITY] is enabled:

1. Press the POWER button.

Theprojectorwillbeturnedonanddisplayamessagetotheeffectthattheprojectorislocked.


3. Type in the correct keyword and press the ENTER button. The projector will display an image.

NOTE: The security disable mode is maintained until the main power is turned off or unplugging the power cord.

38


To disable the SECURITY function:



2.Select[SETUP]→[CONTROL]→[SECURITY]andpresstheENTERbutton.

TheOFF/ONmenuwillbedisplayed.

3. Select[OFF]andpresstheENTERbutton.

TheSECURITYKEYWORDscreenwillbedisplayed.

4. Type in your keyword and press the ENTER button.

Whenthecorrectkeywordisentered,theSECURITYfunctionwillbedisabled.

NOTE:Ifyouforgetyourkeyword,contactyourdealer.Yourdealerwillprovideyouwithyourkeywordinexchangeforyourrequestcode.YourrequestcodeisdisplayedintheKeywordConfirmationscreen.Inthisexample[NB52-YGK8-2VD6-K585-JNE6-EYA8]is a request code.

39


❽ Projecting 3D videosThisprojectorcanbeusedtowatchvideosin3Dusingcommercially-availableactiveshutter-type3Deyewear.Inordertosynchronizethe3Dvideoandeyewear,acommercially-available3Demitterneedstobeconnectedtotheprojector(ontheprojectorside).The3Deyewearreceivesinformationfromthe3Demitterandperformsopeningandclosingontheleftandright.

CAUTION

Health precautionsBeforeuse,pleasemakesuretoreadanyhealthprecautionsthatmaybestatedintheoperatingmanualsenclosedwiththe3Deyewearand3Dvideosoftware(Blu-rayplayer,games,computeranimationfiles,etc.).Pleasetakenoteofthefollowinginordertoavoidadversehealtheffects.• Pleasedonotusethe3Deyewearforpurposesotherthantowatch3Dvideos.• Pleasekeepadistanceofatleast2mawayfromthescreenwhenwatchingvideos.Watchingavideotooclosetothescreenwillincreaseeyefatigue.• Pleasedonotwatchvideoscontinuouslyforalongperiodoftime.Pleasetakea15minutes’breakaftereveryhourofwatching.• Pleaseconsultadoctorbeforewatchingifyouoranyofyourfamilymembershaveahistoryofsufferingfromseizurescausedbylightsensitivity.• Pleasestopwatchingimmediatelyandtakearestwhenyoufeelphysicallyunwellwhilewatching(vomiting,gid-diness,nausea,headaches,soreeyes,blurredvision,crampsanddumbnessinthelimbs,etc.).Pleaseconsultadoctorifthesymptomspersist.• Pleasewatcha3Dvideodirectlyinfrontofthescreen.Ifyouwatcha3Dvideoobliquelyfromthesides,thismayresultinphysicalandeyefatigue.

3Deyewearand3DemitterpreparationsPleaseuseanactiveshutter-type3DeyewearthatconformswiththeVESAstandard.Acommercially-availableRFtypemadebyXpandisrecommended.

3D eyewear �� Xpand X105-RF3D emitter Xpand �� AD025-RF-X1

Procedure to watch 3D videos using this projector1. Connectthevideodevicetotheprojector.

2. Switch on the power supply to the projector.

3. Run the 3D video software and project the video using the projector.

Thishasbeenautomaticallysetupwhenshippedfromthefactory.Whena3Dvideocannotbeprojected,itmaybebecausethe3Ddetectionsignalsarenotincludedorbecausetheyarenotdetectablebytheprojector.

Pleasemanuallyselecttheformat.

4. Select the 3D video format.

(1)Pressthe“3DSet.”buttonontheremotecontrol.

40


The[3DSETTINGS]screenwillbedisplayed.

(2)Pressthe▼buttontoalignthecursorwiththe[FORMAT]andpresstheENTERbutton.

Theformatscreenwillbedisplayed.

(3)Selecttheinputsignalformatusingthe▼buttonandthenpresstheENTERbutton.

The3Dsettingsscreenwilldisappearandthe3Dvideowillbeprojected.

PresstheMENUbuttonandtheon-screenmenuwilldisappear.

The3Dcautionmessagescreenwillbedisplayedwhenswitching toa3Dvideo (default factorysettingwhenshipped).Pleasereadthe“HealthPrecautions”onthepreviouspagetowatchvideosinthecorrectmanner.Thescreenwilldisappearafter60secondsorwhentheENTERbuttonispressed.(→page95)

5. Turn on the power supply of the 3D eyewear and wear the eyewear to watch the video.

Anormalvideowillbeshownwhena2Dvideoisinput.

Towatcha3Dvideoin2D,select[OFF(2D)]inthe[FORMAT]screenmentionedabovein(3).

NOTE:• Uponswitchingto3Dimage,thefollowingfunctionswillbecancelledanddisabled.[BLANKING],[PIP/PICTUREBYPICTURE],

[GEOMETRICCORRECTION],[EDGEBLENDING]([GEOMETRICCORRECTION]and[EDGEBLENDING]adjustmentvalueswillbe maintained.)

• Theoutputmaynotautomaticallyswitchtoa3Dvideodependingonthe3Dinputsignal.• ChecktheoperatingconditionsdescribedintheusermanualoftheBlu-rayplayer.• PleaseconnecttheDINterminalofthe3Demittertothe3DSYNCofthemainprojector.• The3Deyewearallowsvideostobeviewedin3Dbyreceivingsynchronizedopticalsignalsoutputfromthe3Demitter. Asaresult,the3Dimagequalitymaybeaffectedbyconditionssuchasthebrightnessofthesurroundings,screensize,viewing

distance, etc.• Whenplayinga3Dvideosoftwareonacomputer,the3DimagequalitymaybeaffectedifthecomputerCPUandgraphicschip

performance are low. Please check the required operating environment of the computer that is stated in the operating manual attachedtothe3Dvideosoftware.

• Dependingonthesignal,[FORMAT]and[L/RINVERT]maynotbeabletobeselected.Pleasechangethesignalinthatcase.

41


When videos cannot be viewed in 3DPleasecheckthefollowingpointswhenvideoscannotbeviewedin3D.Pleasealsoreadtheoperatingmanualattachedtothe3Deyewear.

Possible reasons Solutions

The selected signal does not support 3D output� Please change the video signal input to one that supports 3D�

The format for the selected signal is turned to [OFF(2D)]� Please change the format in the on-screen menu to [AUTO] or a format that supports 3D�

A eyewear that is not supported by the projector is being used� Please purchase a commercially-available 3D eyewear or 3D emitter (recommended)� (→ page 39)

Please check the following points when a video cannot be viewed in 3D using a 3D eyewear that is supported by the projector�

The power supply of the 3D eyewear is turned off� Please turn on the power supply of the 3D eyewear�

The internal battery of the 3D eyewear is flat� Please charge or replace the battery�

The viewer is located too far away from the screen� Please get closer to the screen until the video can be seen in 3D�

Please turn the L/R INVERT in the on-screen menu to [OFF]�

Due to multiple 3D projectors working at the same time in the vi-cinity, the projectors may interfere with one another� Alternatively, there may be a bright light source near the screen�

Please maintain sufficient distance between the projectors�

Please keep the light source away from the screen�

Please turn the L/R INVERT in the on-screen menu to [OFF]�

There is an obstacle between the optical receiver of the 3D eyewear and the 3D emitter�

Please remove the obstacle�

The 3D format of the 3D video contents is not supported� Please check with the company selling the 3D video contents�

42


❾ Controlling the Projector by Using an HTTP BrowserOverviewTheHTTPServerfunctionprovidessettingsandoperationsfor:1. Settingforwirednetwork(NETWORKSETTINGS)

TousewiredLANconnection,connecttheprojectortothecomputerwithacommerciallyavailableLANcable.(→ page137)

2. Setting Alert Mail (ALERT MAIL)

Whentheprojectorisconnectedtoawirednetwork,lampreplacetimeorerrormessageswillbesentviae-mail.

3. Operating the projector

Poweron/off,selectinginput,volumecontrolandpictureadjustmentsarepossible.

4. SettingPJLinkPASSWORDandAMXBEACON

AccesstotheHTTPserverfunctionisavailable:• StarttheWebbrowseronthecomputerviathenetworkconnectedtotheprojectorandenterthefollowing

URL :

http://<the projector’s IP address> /index.html

TIP:ThefactorysettingIPaddressis[DHCPON].

NOTE: • Tousetheprojectorinanetwork,consultwithyournetworkadministratoraboutnetworksettings.• Thedisplay’sorbutton’sresponsecanbesloweddownoroperationmaynotbeaccepteddependingthesettingsofyournet-

work. Shouldthishappen,consultyournetworkadministrator.Theprojectormaynotrespondifitsbuttonsarerepeatedlypressedin

rapidintervals.Shouldthishappen,waitamomentandrepeat.Ifyoustillcan’tgetanyresponse,turnoffandbackontheprojec-tor.

• IfthePROJECTORNETWORKSETTINGSscreendoesnotappearinthewebbrowser,presstheCtrl+F5keystorefreshyourwebbrowser (or clear the cache).

• Thisprojectoruses“JavaScript”and“Cookies”andthebrowsershouldbesettoacceptthesefunctions.Thesettingmethodwillvarydependingontheversionofbrowser.Pleaserefertothehelpfilesandtheotherinformationprovidedinyoursoftware.

Preparation before UseConnecttheprojectortoacommerciallyavailableLANcablebeforeengaginginbrowseroperations.(→page137)Operationwithabrowserthatusesaproxyservermaynotbepossibledependingonthetypeofproxyserverandthesettingmethod.Althoughthetypeofproxyserverwillbeafactor,itispossiblethatitemsthathaveactuallybeensetwillnotbedisplayeddependingontheeffectivenessofthecache,andthecontentssetfromthebrowsermaynotbereflectedinoperation.Itisrecommendedthataproxyservernotbeusedunlessitisunavoidable.

43


Handling of the Address for Operation via a BrowserRegardingtheactualaddressthatisenteredfortheaddressorenteredtotheURLcolumnwhenoperationofthepro-jectorisviaabrowser,thehostnamecanbeusedasitiswhenthehostnamecorrespondingtotheIPaddressoftheprojectorhasbeenregisteredtothedomainnameserverbyanetworkadministrator,orthehostnamecorrespondingtotheIPaddressoftheprojectorhasbeensetinthe“HOSTS”fileofthecomputerbeingused.

Example1:Whenthehostnameoftheprojectorhasbeensetto“pj.nec.co.jp”,accessisgainedtothenetworksettingbyspecifying http://pj.nec.co.jp/index.html fortheaddressortheentrycolumnoftheURL.

Example2:WhentheIPaddressoftheprojectoris“192.168.73.1”,accessisgainedtothenetworksettingbyspecifying http://192.168.73.1/index.html fortheaddressortheentrycolumnoftheURL.

PROJECTOR ADJUSTMENT

POWER:Thiscontrolsthepoweroftheprojector.ON �� Power is switched on�OFF �� Power is switched off�

VOLUME:Thiscontrolsthevolumeoftheprojector.▲ �� Increases the volume adjustment value�▼ �� Decreases the volume adjustment value�

AV-MUTE:Thiscontrolsthemutefunctionoftheprojector.PICTURE ON �� Mutes the video�PICTURE OFF �� Cancels the video muting�SOUND ON �� Mutes the audio�SOUND OFF �� Cancels the audio muting�ALL ON �� Mutes each of the video, and audio functions�ALL OFF �� Cancels the muting of each of the video, and audio functions�

44


PICTURE:Controlsthevideoadjustmentoftheprojector.BRIGHTNESS ▲ �� Increases the brightness adjustment value�BRIGHTNESS ▼ �� Decreases the brightness adjustment value�CONTRAST ▲ �� Increases the contrast adjustment value�CONTRAST ▼ �� Decreases the contrast adjustment value�COLOR ▲ �� Increases the color adjustment value�COLOR ▼ �� Decreases the color adjustment value�HUE ▲ �� Increases the hue adjustment value�HUE ▼ �� Decreases the hue adjustment value�SHARPNESS ▲ �� Increases the sharpness adjustment value�SHARPNESS ▼ �� Decreases the sharpness adjustment value�• Thefunctionsthatcanbecontrolledwillvarydependingonthesignalbeinginputtotheprojector.(→page76,

77)

SOURCESELECT:Thisswitchestheinputconnectoroftheprojector.HDMI1 �� Switches to the HDMI 1 IN connector�HDMI2 �� Switches to the HDMI 2 IN connector�DisplayPort �� Switches to the DisplayPort�BNC �� Switch to BNC (analog RGB) video input�BNC(CV) �� Switch to BNC (CV) video input�BNC(Y/C) �� Switch to BNC (Y/C) video input�COMPUTER �� Switches to the COMPUTER IN connector�HDBaseT �� Switch to image input sent from a transmission device that supports HDBaseT�

PROJECTORSTATUS:Thisdisplaystheconditionoftheprojector.LAMP LIFE REMAINING ��Displays the remaining life of the lamp as a percentage�LAMP HOURS USED ��Displays how many hours the lamp has been used�FILTER HOURS USED ��Displays how many hours the filter has been used�ERROR STATUS ��Displays the status of errors occurring within the projector�

LOGOFF:Loggingoffyourprojectorandreturningtotheauthenticationscreen(LOGONscreen).

45


NETWORK SETTINGS

•SETTINGS

WIRED

SETTING SetforwiredLAN.

APPLY ApplyyoursettingstowiredLAN.

PROFILE1/PROFILE2 TwosettingscanbesetforwiredLANconnection.SelectPROFILE1orPROFILE2.

DISABLE TurnoffwiredLANconnection

DHCPON AutomaticallyassignIPaddress,subnetmask,andgatewaytotheprojectorfromyourDHCPserver.

DHCPOFF SetIPaddress,subnetmask,andgatewaytotheprojectorassignedbyyournetworkadministrator.

IPADDRESS SetyourIPaddressofthenetworkconnectedtotheprojector.

SUBNETMASK Setyoursubnetmasknumberofthenetworkconnectedtotheprojector.

GATEWAY Setthedefaultgatewayofthenetworkconnectedtotheprojector.

AUTODNSON DHCPserverwillautomaticallyassign IPaddressofDNSserverconnected to theprojector.

AUTODNSOFF SetyourIPaddressofDNSserverconnectedtotheprojector.

46


•NAME

PROJECTORNAME Enteranameforyourprojectorso thatyourcomputercan identify theprojector.Aprojectornamemustbe16charactersorless.TIP:Projectornamewillnotbeaffectedevenwhen[RESET]isdonefromthemenu.

HOSTNAME Enterthehostnameofthenetworkconnectedtotheprojector.Ahostnamemustbe15orless.

DOMAINNAME Enter thedomainnameof thenetworkconnectedtotheprojector.Adomainnamemustbe60charactersorless.

•ALERTMAIL

ALERTMAIL Thisoptionwillnotifyyourcomputeroflampreplacetimeorerrormessagesviae-mailwhenusingwiredLAN.PlacingacheckmarkwillturnontheAlertMailfeature.ClearingacheckmarkwillturnofftheAlertMailfeature.Sampleofamessagetobesentfromtheprojector:Thelampandfiltersareattheendofitsusablelife.Pleasereplacethelampandfilters.ProjectorName:NECProjectorLampHoursUsed:100[H]

SENDER’SADDRESS Entersender’saddress.

SMTPSERVERNAME EntertheSMTPservernametobeconnectedtotheprojector.

RECIPIENT’SADDRESS1,2,3

Enteryourrecipient’saddress.Uptothreeaddressescanbeentered.

TESTMAIL SendatestmailtocheckwhetheryoursettingsarecorrectornotNOTE:• Ifyouexecuteatest,youmaynotreceiveanAlertmail.Shouldthishappen,checkifnetwork

settings are correct.• Ifyouenteredanincorrectaddressinatest,youmaynotreceiveanAlertmail.Shouldthis

happen,checkiftheRecipient’sAddressiscorrect.

SAVE Clickthisbuttontosaveyoursettingstotheprojector’smemory.

47


•NETWORKSERVICE

PJLinkPASSWORD SetapasswordforPJLink*.Apasswordmustbe32charactersorless.Donotforgetyourpassword.However,ifyouforgetyourpassword,consultwithyourdealer.

HTTPPASSWORD SetapasswordforHTTPserver.Apasswordmustbe10charactersorless.Whenapasswordissetup,youwillbepromptedforyourusername(arbitrary)andpasswordduringLOGON.

AMXBEACON TurnonorofffordetectionfromAMXDeviceDiscoverywhenconnectingtothenetworksupportedbyAMX’sNetLinxcontrolsystem.TIP: WhenusingadevicethatsupportsAMXDeviceDiscovery,allAMXNetLinxcontrolsystemwillrec-ognizethedeviceanddownloadtheappropriateDeviceDiscoveryModulefromanAMXserver.PlacingacheckmarkwillenabledetectingtheprojectorfromAMXDeviceDiscovery.ClearingacheckmarkwilldisabledetectingtheprojectorfromAMXDeviceDiscovery.

NOTE: If you forget your password, contact your dealer.

*WhatisPJLink?PJLinkisastandardizationofprotocolusedforcontrollingprojectorsofdifferentmanufacturers.Thisstandardproto-colisestablishedbyJapanBusinessMachineandInformationSystemIndustriesAssociation(JBMIA)in2005.TheprojectorsupportsallthecommandsofPJLinkClass1.SettingofPJLinkwillnotbeaffectedevenwhen[RESET]isdonefromthemenu.

•INFORMATION

WIREDLAN DisplayalistofsettingsofwiredLANconnection.

UPDATE Reflectsettingswhentheyarechanged.

48

4. Multi-Screen Projection❶ Things that can be done using multi-screen projectionThisprojectorcanbeusedsinglyorarrangedinmultipleunitsformulti-screenprojection.Wewillintroduceanexampleusingtwoprojectionscreenshere.

Case 1Usingasingleprojectortoprojecttwotypesofvideosatthesametime[PIP/PICTUREBYPICTURE]

Case 2Usingfourprojectors(liquidcrystalpanel:XGA)toprojectvideowitharesolutionof1920×1080pixels[TILING]

Case 1. Using a single projector to project two types of videos [PIP/PICTURE BY PIC-TURE]

Connection example and projection image

Inthecaseof[PICTUREBYPICTURE] Inthecaseof[PIP]

On-screen menu operationsDisplay[DISPLAY]→[PIP/PICTUREBYPICTURE]→[MODE]screenintheon-screenmenuandselect[PIP]or[PICTUREBYPICTURE].Fordetails,pleasereferto“4-2DisplayingTwoPicturesattheSameTime”.(→page52)

49

4. Multi-Screen Projection

Case 2. Using four projectors (liquid crystal panel: XGA) to project videos with a resolution of 1920 × 1080 pixels [TILING]

Connection example and projection image

On-screen menu operations1 Four similar videos are displayed when four projectors are projected.

Pleaserequesttheretailstoretoadjusttheprojectionpositionofeachprojector.

50


2 Operate the on-screen menu using the four respective projectors to divide the image into four portions.

Display[DISPLAY]→[MULTISCREEN]→[PICTURESETTING]Screenintheon-screenmenuandselect[TIL-ING].

(1)Inthescreenforsettingthenumberofhorizontalunits,select[2UNITS].(numberofunitsinthehorizontaldirec-tion)

(2)Inthescreenforsettingthenumberofverticalunits,select[2UNITS].(numberofunitsintheverticaldirec-tion)

(3)Inthescreenforsettingthehorizontalorder,select[1stUNIT]or[2ndUNIT].

(lookatthescreens,theoneontheleftisthe[1stUNIT]whiletheoneontherightisthe[2ndUNIT])

(4)Inthescreenforsettingtheverticalorder,selectthe[1stUNIT]orthe[2ndUNIT].

(lookatthescreens,theoneatthetopisthe[1stUNIT]whiletheoneatthebottomisthe[2ndUNIT])

3 Adjust the lens shift of each projector to fine-tune the boundaries of the screen.

Forfurtherfine-tuning,adjustusing[DISPLAY]→[EDGEBLENDING]intheon-screenmenuforeachprojector.

Fordetails,pleasereferto“4-3DisplayingaPictureUsing[EDGEBLENDING]”.

(→page56)

51


Things to note when installing projectors• Leavesufficientspaceontheleftandrightoftheprojectorsothattheairintakeanddischargeoutletsoftheprojectorarenotobstructed.Whentheairintakeanddischargeoutletareobstructed,thetemperatureinsidetheprojectorwillriseandthismayresultinamalfunction.

• Pleasedonotpileuptheprojectorsdirectlyontopofoneanotherwheninstallingthem.Whentheprojectorsarepiledupontopofoneanother,theymayfalldown,resultingindamageandfailure.

• Installationexamplewhenusingtwoprojectors Thefollowinginstallationisrecommendedwhencombiningtheinstallationoftwoprojectorsformulti-screenprojec-tion.Pleaseleaveaspaceofatleast10cmbetweentheairintake/dischargeoutletandthewall.[Installationexample]

Airintakeopening Airdischargeoutlet

CabinetCabinetCabinet

Airdis-charge

Airintake

Front Rightside Back

WARNING

Pleaserequesttheretailstoreforspecialinstallationservicessuchaswhenmountingtheprojectortotheceiling.Nevercarryouttheinstallationbyyourself.Theprojectormayfalldownandresultininjury.Pleaseuseasturdycabinetthatcanwithstandtheweightoftheprojectorfortheinstallation.Pleasedonotpileuptheprojectorsdirectlyontopofoneanother.

NOTE:• Fortherangeoftheprojectiondistance,pleaserefertotheAppendix“Throwdistanceandscreensize”.(→ page 158)

52


❷ Displaying Two Pictures at the Same TimeTheprojectorhasafeaturethatallowsyoutoviewtwodifferentsignalssimultaneously.Youhavetwomodes:PIPmodeandPICTUREBYPICTUREmode.Theprojectionvideointhefirstscreendisplayisknownasthemaindisplaywhiletheprojectionvideothatiscalledoutsubsequentlyisknownasthesub-display.Selecttheprojectionfunctionunder[DISPLAY]→[PIP/PICTUREBYPICTURE]→[MODE]intheon-screenmenu(thedefaultfactorysettingwhenshippedisPIP).(→page85)• Asinglescreenisprojectedwhenpoweristurnedon.

Picture in Picture functionAsmallsub-displayisdisplayedinsidethemaindisplay.

Thesub-displaycanbesetupandadjustedasfollows.(→page86)• Selectwhethertodisplaythesub-displayatthetopright,topleft,bottomrightorbottomleftofthescreen(thesizeofthesub-displaycanbeselectedandthepositioncanbefine-tuned)• Switchthemaindisplaywiththesub-display

Main Display

Sub-Display

PicturebypicturefunctionDisplaythemaindisplayandsub-displaysidebyside.

Themaindisplayandsub-displaycanbesetupandadjustedasfollows.(→ page86)• Selectingthedisplayboundary(ratio)ofthemaindisplayandsub-display• Switchthemaindisplayandsub-display

Main Display Sub-Display

Input terminals that can be used for the main screen and sub-screen.Themainscreenandsub-screencanprovidethefollowinginputterminals.• Themaindisplayandsub-displaysupportcomputersignalsuptoWUXGA@60HzRB.

Sub-Display or additional displayHDMI1 HDMI2 DisplayPort BNC BNC(CV) BNC(Y/C) COMPUTER HDBaseT

Main Display

HDMI1No

Yes Yes Yes YesNoHDMI2 Yes Yes Yes Yes

DisplayPort Yes Yes Yes YesBNC Yes Yes Yes

NoNo Yes

BNC(CV) Yes Yes Yes Yes YesBNC(Y/C) Yes Yes Yes Yes YesCOMPUTER Yes Yes Yes No Yes Yes No YesHDBaseT No Yes Yes Yes Yes No

NOTE:• Somesignalsmaynotappeardependingontheresolution.

53


Projecting two screens1. PresstheMENUbuttontodisplaytheon-screenmenuandselect [DISPLAY]→ [PIP/PICTUREBYPIC-

TURE].

Thisdisplaysthe[PIP/PICTUREBYPICTURE]screenintheon-screenmenu.

2. Select[SUBINPUT]usingthe▼/▲ buttons, and press the ENTER button.

Thisdisplaysthe[SUBINPUT]screen.

3. Select the input signal using the ▼/▲ buttons, and press the ENTER button.

The[PIP](PICTUREINPICTURE)or[PICTUREBYPICTURE]screensetupunder[MODE]isprojected.(→page85)

• Whenthesignalnameisdisplayedingrey,thismeansthatitcannotbeselected.

• ThesignalcanalsobeselectedbypressingthePIPbuttonorPBP/POPbuttonontheremotecontrol.


Theon-screenmenuwilldisappear.

5. Whenreturningtosinglescreen,displaythe[PIP/PICTUREBYPICTUE]screenonemoretimeandselect[OFF]inthe[SUBINPUT]screenoftheStep3.

TIP:• Duringdual-screenprojection,iftheselectedinputisnotsupportedbythesub-screen,thesub-screenwillappearasablack

screen.

54


Switching the main display with the sub-display and vice versa1. PresstheMENUbuttontodisplaytheon-screenmenuandselect [DISPLAY]→ [PIP/PICTUREBYPIC-

TURE].

Thisdisplaysthe[PIP/PICTUREBYPICTURE]screenintheon-screenmenu.

2. Select[PICTURESWAP]usingthe▼/▲ buttons and then press the ENTER button.

Displaythescreenforswitchingthedisplaypositions.

3. Select[ON]usingthe▼ button and then press the ENTER button.

Thevideoofthemaindisplaywillswitchwiththatofthesub-display.

Whenturned“OFF” Whenturned“ON”

Sub-displayvideo

Maindisplayvideo Sub-displayvideo

Maindisplayvideo

ThesignaloutputfromtheHDMIoutputterminaldoesnotchangeevenifthedisplaypositionsareswitched.

4. Press the menu button.

Theon-screenmenuwilldisappear.

55


Restrictions

• Thefollowingoperationsareenabledonlyforthemaindisplay.

• Audio-visualadjustments

• Videomagnification/compressionusingthepartialD-ZOOM/ZOOM+/−buttons.

However,magnification/compressionisuptothepositionssetin[PICTUREBYPICTUREBORDER]only.

• TESTPATTERN

• Thefollowingoperationsareenabledforboththemaindisplayandsub-display.Theseoperationscannotbeap-pliedindividually.

• Momentarydeletionofvideo/audio

• Videopause

• [PIP/PICTUREBYPICTURE]cannotbeusedwhena3Dvideoisbeingdisplayed.

• Whenusingthe[PIP/PICTUREBYPICTURE]function,[CLOSEDCAPTION]and[DYNAMICCONTRAST]canbeused.

• [PIP/PICTUREBYPICTURE]cannotbeusedwhenthesignalinputhasaresolutionof1920×1200ormore.

• TheHDMIoutputterminalhasarepeaterfunction.Theoutputresolutionislimitedbythemaximumresolutionoftheconnectedmonitorandprojector.

56


❸ Displaying a Picture Using [EDGE BLENDING]Ahighresolutionvideocanbeprojectedonanevenbiggerscreenbycombiningmultipleprojectorsontheleft,right,topandbottom.Thisprojectorisequippedwithan“EDGEBLENDINGFunction”thatmakestheedges(boundaries)oftheprojectionscreenindistinguishable.

NOTE:• Forprojectorthrowdistances,referto“Throwdistanceandscreensize”onpage158.• BeforeperformingtheEdgeBlendingfunction,placetheprojectorinthecorrectpositionsothattheimagebecomessquarein

the appropriate size, and then make optical adjustments (lens shift, focus, and zoom).• Adjustthebrightnessofeachprojectorusing[LAMPADJUST]under[LAMPMODE].Inaddition,use[REF.WHITEBALANCE]to

adjustthe[CONTRAST],[BRIGHTNESS]and[UNIFORMITY].

Before explaining use of the Edge Blending functionThissectionexplainsthecasefor“Example:Placingtwoprojectorssidebyside”.Asshown,theprojectedimageontheleftisreferredtoas“ProjectorA”andtheprojectedimageontherightisreferredto“ProjectorB”.Unlessotherwisespecifiedhereinafter,the“projector”isusedtomeanbothAandB.

Example:Placingtwoprojectorssidebyside

EdgeBlendingarea

Projectedarea Projectedarea

ProjectorA ProjectorB

57


Preparation:• Turnontheprojectoranddisplayasignal.• Whenperformingsettingsoradjustmentsusingtheremotecontrol,enablethe[CONTROLID]soasnottoactivatetheotherprojectors.(→page105)

Setting the overlap of projection screens

① Enable [EDGE BLENDING].1 Press the “Edge Blend.” button.

The[EDGEBLENDING]screenwillbedisplayed.Alignthecursorwith[MODE]andthenpresstheENTERbutton.Themodescreenwillbedisplayed.

2 Select[MODE]→[ON]andpresstheENTERbutton.

ThisenablestheEdgeBlendingfunction.Thefollowingmenuitemsareavailable:

[TOP],[BOTTOM],[LEFT],[RIGHT],and[BLACKLEVEL]

3 Select[RIGHT]forProjectorAand[LEFT]forProjectorB.

PresstheENTERbutton.

Thefollowingitemsareavailable:

[CONTROL],[MARKER],[RANGE],and[POSITION]

58


4 Select[CONTROL]→[ON]andpresstheENTERbutton.

Each[TOP],[BOTTOM],[LEFT],[RIGHT],and[BLACKLEVEL]hasitsown[CONTROL],[MARKER],[RANGE],and[POSITION].

• ForProjectorA,setthe[CONTROL]forthe[TOP],[LEFT]and[BOTTOM]to[OFF].SimilarlyforProjectorB,setthe[CONTROL]forthe[TOP],[RIGHT]and[BOTTOM]to[OFF].

② Adjust [RANGE] and [POSITION] to determine an area of overlapped edges of images projected from each projector.Turningon[MARKER]willdisplaymarkersinmagentaandgreen.Themagentamarkerisusedfor[RANGE]andgreenonefor[POSITION].

[RANGE](Determineanareaofoverlappededgesofimages.)

[POSITION](Determinethepositionofoverlappededgesofimages.)Greenmarker

Turnon[RIGHT]

Magentamarker

Turnon[LEFT]

Magentamarker

* The2screensareseparatedinthediagramforexplanatorypurposes.

59


1 Adjust[RANGE].

Usethe◀ or ▶buttontoadjusttheoverlappedarea.

TIP:• Adjusttooverlaponeprojector’markerwiththeotherprojector’smarker.

2 Adjust[POSITION].

Usethe◀ or ▶buttontoalignoneedgewiththeotheredgeofoverlappedimages.

TIP:• Whendisplayingasignalwithadifferentresolution,performtheEdgeBlendingfunctionfromthestart.• Settingof[MARKER]willnotbesavedandreturnto[OFF]whentheprojectoristurnedoff.• Todisplayorhidethemarkerwhiletheprojectorisrunning,turnonoroff[MARKER]fromthemenu.

60


Black Level AdjustmentThisadjuststheblackleveloftheoverlappingareaandthenon-overlappingareaofthemulti-screen(EDGEBLEND-ING).Adjustthebrightnesslevelifyoufeelthedifferenceistoolarge.

NOTE: Thisfunctionisenabledonlywhen[MODE]isturnedon.Adjustableareavariesdependingonwhatcombinationof[TOP],[BOTTOM],[LEFT]and[RIGHT]areturnedon.

Example:AdjustingtheBlackLevelwhenplacingtwoprojectorssidebyside

Widthofoverlap

Adjust[CENTER] Adjust[CENTER]

ProjectorA’simage

ProjectorB’simage

Adjust[CENTER-RIGHT] Adjust[CENTER-LEFT]

1. Turnon[MODE]

2. Select[BLACKLEVEL]andpresstheENTERbutton.

Thescreenwillswitchtotheblackleveladjustmentscreen.

3. Use the ▼ or ▲ button to select an item and use the ◀ or ▶ to adjust the black level.

Dothisfortheotherprojectorifnecessary.

61


9-segmentedportionsforBlackLeveladjustmentThecenterprojector

Thisfunctionadjuststhebrightnesslevelof9-segmentedportionsforthecenterprojectorand4-segmentedportionsfortheleftbottomprojectorasshownbelow.

TOP-LEFT

BOTTOM-LEFT

CENTER-LEFT

TOP-RIGHT

CENTER-RIGHT

BOTTOM-RIGHT

TOP-CENTER

CENTER

CENTER

BOTTOM-CENTER

TOP-RIGHT

CENTER-RIGHT

TOP-CENTER

TIP:• Thenumberofblackleveldivisionscreens(maximumofninedivisions)changesdependingonthenumberofedgeblending

positions selected (top, bottom, right, left). In addition, when the top / bottom and left / right ends are selected, the corner division screen appears.

• Theedgeblendingwidthisthewidthsetintherangeandthecornerisformedbytheintersectingareaofthetop/bottomendsor left / right ends.

• The[BLACKLEVEL]canbeadjustedtomakeitbrighteronly.

62

5. Using On-Screen Menu❶ Using the Menus

NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected.

1. Press the MENU button on the remote control or the projector cabinet to display the menu.

NOTE: The commands such as ENTER,EXIT,▲▼, ◀▶ in the bottom show available buttons for your operation.

2. Press the ◀▶ buttons on the remote control or the projector cabinet to display the submenu.

3. Press the ENTER button on the remote control or the projector cabinet to highlight the top item or the first tab.

4. Use the ▲▼ buttons on the remote control or the projector cabinet to select the item you want to adjust or set.

You can use the ◀▶ buttons on the remote control or the projector cabinet to select the tab you want.

5. Press the ENTER button on the remote control or the projector cabinet to display the submenu window.

6. Adjust the level or turn the selected item on or off by using the ▲▼◀▶ buttons on the remote control or the projector cabinet.

Changesarestoreduntiladjustedagain.

7. Repeat steps 2-6 to adjust an additional item, or press the EXIT button on the remote control or the projec-tor cabinet to quit the menu display.

NOTE:Whenamenuormessageisdisplayed,severallinesofinformationmaybelost,dependingonthesignalorsettings.

8. Press the MENU button to close the menu.

To return to the previous menu, press the EXIT button.

63

5. Using On-Screen Menu

❷ Menu ElementsSlidebar

Solidtriangle

Menumode

Tab

Radiobutton

HighAltitudesymbol

ECOmodesymbol

Menuwindowsordialogboxestypicallyhavethefollowingelements:

Highlight �� Indicates the selected menu or item� Solid triangle �� Indicates further choices are available� A highlighted triangle indicates the item is active� Tab �� Indicates a group of features in a dialog box� Selecting on any tab brings its page to the front�Radio button ��Use this round button to select an option in a dialog box�Source �� Indicates the currently selected source�Menu mode �� Indicates the current menu mode: BASIC or ADVANCED�Off Timer remaining time �� Indicates the remaining countdown time when the [OFF TIMER] is preset�Slide bar �� Indicates settings or the direction of adjustment�ECO mode symbol �� Indicates [ECO MODE] is set�Key Lock symbol �� Indicates the [CONTROL PANEL LOCK] is enabled�Thermometer symbol �� Indicates the [ECO MODE] is forcibly set to [ON] mode because the internal temperature is too

high�High Altitude symbol �� Indicates the [FAN MODE] is set to [HIGH ALTITUDE] mode�

Source

Availablebuttons

Thermometersymbol

KeyLocksymbol

OffTimerremainingtime

Highlight

64


* Theasterisk(*)indicatesthatthedefaultsettingvariesdependingonthesignal.*1 The[GAMMACORRECTION]itemisavailablewhenanitemotherthan[DICOMSIM.]isselectedfor[REFERENCE].*2 The[SCREENSIZE]itemisavailablewhen[DICOMSIM.]isselectedfor[REFERENCE].*3 When[PRESENTATION]or[HIGH-BRIGHT]isselectedin[REFERENCE],the[COLORTEMPERATURE]isnotavailable.

•Basicmenuitemsareindicatedbyshadedarea.❸ List of Menu ItemsSomemenuitemsarenotavailabledependingontheinputsource.Menu Item Default Options

INPUT

1:HDMI1 *2:HDMI2 *3:DisplayPort *4:BNC *5:BNC(CV) *6:BNC(Y/C) *7:COMPUTER *8:HDBaseTENTRY LISTTEST PATTERN

ADJUST

PICTURE

MODE STANDARD STANDARD, PROFESSIONAL

PRESET * HIGH-BRIGHT, PRESENTATION, VIDEO, MOVIE, GRAPHIC, sRGB, DICOM SIM�

DETAIL SETTINGS

GENERAL

REFERENCE * HIGH-BRIGHT, PRESENTATION, VIDEO, MOVIE, GRAPHIC, sRGB, DICOM SIM�

GAMMA CORRECTION*1 DYNAMIC, NATURAL, BLACK DETAILSCREEN SIZE*2 * LARGE, MEDIUM, SMALLCOLOR TEMPERATURE*3 *DYNAMIC CONTRAST * OFF, MOTION IMAGE, STILL IMAGE

WHITE BALANCECONTRAST R 0CONTRAST G 0CONTRAST B 0BRIGHTNESS R 0BRIGHTNESS G 0BRIGHTNESS B 0

COLOR CORRECTIONRED 0GREEN 0BLUE 0YELLOW 0MAGENTA 0CYAN 0

CONTRAST 50BRIGHTNESS 50SHARPNESS 10COLOR 50HUE 0RESET

IMAGE OPTIONS

CLOCK *PHASE *HORIZONTAL *VERTICAL *BLANKING * TOP, BOTTOM, LEFT, RIGHTOVERSCAN * AUTO, 0[%], 5[%], 10[%]

ASPECT RATIO

* (COMPUTER) AUTO, 4:3, 5:4, 16:9, 15:9, 16:10, NATIVE

* (COMPONENT/VIDEO/S-VIDEO) AUTO, 4:3, LETTERBOX, WIDE SCREEN, ZOOM

* (COMPONENT/VIDEO/S-VIDEO) AUTO, 4:3 WINDOW, LETTERBOX, WIDE SCREEN, FULL

INPUT RESOLUTION * –

VIDEO

NOISE REDUCTIONRANDOM NR * OFF, LOW, MEDIUM, HIGHMOSQUITO NR OFF OFF, LOW, MEDIUM, HIGHBLOCK NR OFF OFF, LOW

DEINTERLACE NORMAL NORMAL, MOVIE, STILLCONTRAST ENHANCEMENT

MODE AUTO OFF, AUTO, NORMALGAIN

SIGNAL TYPE AUTO AUTO, RGB, COMPONENTVIDEO LEVEL AUTO AUTO, NORMAL, ENHANCED

3D SETTINGS

STEREO VIEWER SINGLE SINGLE, DUAL LEFT, DUAL RIGHTSTEREO FILTER SINGLE SINGLE, DUAL LEFT, DUAL RIGHT

FORMAT AUTOAUTO, OFF(2D), FRAME PACKING, SIDE BY SIDE(HALF), SIDE BY SIDE(FULL), TOP AND BOTTOM, FRAME ALTERNATIVE, LINE ALTERNATIVE

L/R INVERT OFF OFF, ON

65


Menu Item Default Options

DISPLAY

PIP/PICTURE BY PICTURE

SUB INPUT OFF, HDMI1, HDMI2, DisplayPort, BNC, BNC(CV), BNC(Y/C), COMPUTER, HDBaseT

MODE PIP, PICTURE BY PICTUREPICTURE SWAP OFF OFF, ON

PIP SETTING

START POSITION TOP-LEFT, TOP-RIGHT, BOTTOM-LEFT, BOTTOM-RIGHTHORIZONTAL POSITIONVERTICAL POSITIONSIZE LARGE, MEDIUM, SMALL

BORDER

GEOMETRIC CORRECTION

KEYSTONE

HORIZONTALVERTICALTILTTHROW RATIO

CORNERSTONE TOP-LEFT, TOP, TOP-RIGHT, LEFT, RIGHT, BOTTOM-LEFT, BOTTOM, BOTTOM-RIGHT

HORIZONTAL CORNER TOP-LEFT, TOP, TOP-RIGHT, LEFT, RIGHT, BOTTOM-LEFT, BOTTOM, BOTTOM-RIGHT

VERTICAL CORNER TOP-LEFT, TOP, TOP-RIGHT, LEFT, RIGHT, BOTTOM-LEFT, BOTTOM, BOTTOM-RIGHT

PINCUSHION TOP, BOTTOM, LEFT, RIGHTPC TOOL OFF OFF, 1, 2, 3RESET

EDGE BLENDING

MODE OFF OFF, ON

TOP

CONTROL ON OFF, ONMARKER ON OFF, ONRANGEPOSITION

BOTTOM


LEFT


RIGHT


BLACK LEVEL

TOP-LEFTTOP-CENTERTOP-RIGHTCENTER-LEFTCENTERCENTER-RIGHTBOTTOM-LEFTBOTTOM-CENTERBOTTOM-RIGHT

MULTI SCREEN

WHITE BALANCE

MODE OFF OFF, ONCONTRAST WCONTRAST RCONTRAST GCONTRAST BBRIGHTNESS WBRIGHTNESS RBRIGHTNESS GBRIGHTNESS B

PICTURE SETTING

MODE OFF OFF, ZOOM, TILING

ZOOM

HORIZONTAL ZOOMVERTICAL ZOOMHORIZONTAL POSITIONVERTICAL POSITION

TILING

WIDTH 1 UNIT, 2 UNITS, 3 UNITS, 4 UNITSHEIGHT 1 UNIT, 2 UNITS, 3 UNITS, 4 UNITSHORIZONTAL POSITION 1st UNIT, 2nd UNIT, 3rd UNIT, 4th UNITVERTICAL POSITION 1st UNIT, 2nd UNIT, 3rd UNIT, 4th UNIT

66



SETUP

MENU

LANGUAGE ENGLISH

ENGLISH, DEUTSCH, FRANÇAIS, ITALIANO, ESPAÑOL, SVENSKA, 日本語DANSK, PORTUGUÊS, ČEŠTINA, MAGYAR, POLSKI, NEDERLANDS, SUOMINORSK, TÜRKÇE, РУССКИЙ, , Ελληνικά, 中文, 한국어ROMÂNĂ, HRVATSKA, БЪЛГАРСКИ, INDONESIA, हिन्दी, ไทย,

, 繁體中文COLOR SELECT COLOR COLOR, MONOCHROMEINPUT DISPLAY ON OFF, ONMESSAGE DISPLAY ON OFF, ONID DISPLAY ON OFF, ONECO MESSAGE OFF OFF, ON3D CAUTION MESSAGE ON OFF, ON

DISPLAY TIME AUTO 45 SEC MANUAL, AUTO 5 SEC, AUTO 15 SEC, AUTO 45 SEC

FILTER MESSAGE OFF OFF, 100[H], 500[H], 1000[H], 2000[H]

INSTALLATION

ORIENTATION AUTO AUTO, DESKTOP FRONT, CEILING REAR, DESKTOP REAR, CEILING FRONT

SCREEN TYPE FREE FREE, 4:3 SCREEN, 16:9 SCREEN, 16:10 SCREEN

WALL COLOR OFFOFF, WHITEBOARD, BLACKBOARD, BLACKBOARD (GRAY), LIGHT YELLOW, LIGHT GREEN, LIGHT BLUE, SKY BLUE, LIGHT ROSE, PINK

FAN MODE AUTO AUTO, HIGH, HIGH ALTITUDE

LAMP MODE ECO MODE OFF OFF, ONLAMP ADJUST

REF� WHITE BALANCE

CONTRAST RCONTRAST GCONTRAST BBRIGHTNESS RBRIGHTNESS GBRIGHTNESS BUNIFORMITY RUNIFORMITY B

STATIC CONVERGENCE

HORIZONTAL RHORIZONTAL GHORIZONTAL BVERTICAL RVERTICAL GVERTICAL B

67



SETUP CONTROL

TOOLS

ADMINISTRA-TOR MODE

MENU MODE ADVANCED ADVANCED, BASICNOT SAVE SETTING VALUES OFF OFF, ONNEW PASSWORDCONFIRM PASSWORD

PROGRAM TIMER

ENABLE OFF OFF, ON

SETTINGS

EDIT

ACTIVE OFF, ON

DAY SUN, MON, TUE, WED, THU, FRI, SAT, MON-FRI, MON-SAT, EVERY DAY

TIMEFUNCTION POWER, INPUT, ECO MODEADVANCED SETTINGSPOWER OFF, ON

INPUT HDMI1, HDMI2, DisplayPort, BNC, BNC(CV), BNC(Y/C), COMPUTER, HDBaseT

ECO MODE OFF, ONREPEAT OFF, ON

DELETEUPDOWNBACK

DATE AND TIME SETTINGS

TIME ZONE SETTIMGS

GMT

-12:00, -11:30, -11:00, -10:30, -10:00, -09:30, -09:00, -08:30, -08:00, -07:30, -07:00, -06:30, -06:00, -05:30, -05:00, -04:30, -04:00, -03:30, -03:00, -02:30, -02:00, -01:30, -01:00, -00:30, 00:00, +00:30, +01:00, +01:30, +02:00, +02:30, +03:00, +03:30, +04:00, +04;30, +05:00, +05:30, +06:00, +06:30, +07:00, +07:30, +08:00, +08:30, +09:00, +09:30, +10:00, +10:30, +11:00, +11:30, +12:00, +12:30, +13:00


DATE MM/DD/YYYYTIME HH:MMINTERNET TIME SERVER OFF, ON

IP ADDRESSUPDATE

SUMMER TIME SETTINGS

ENABLE OFF, ONMON(START) 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12

DAY(START)FIRST WEEK, SECOND WEEK, THIRD WEEK, FOURTH WEEK, LAST WEEKSUN, MON, TUE, WED, THU, FRI, SAT

TIME(START)MON(EXIT) 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12

DAY(EXIT)FIRST WEEK, SECOND WEEK, THIRD WEEK, FOURTH WEEK, LAST WEEKSUN, MON, TUE, WED, THU, FRI, SAT

TIME(EXIT)TIME DIFFERENCE +01:00, +00:30, -00:30, -01:00

MOUSE (Note) Cannot be used for this device�CONTROL PANEL LOCK OFF OFF, ONSECURITY OFF OFF, ONCOMMUNICATION SPEED 38400bps 4800bps, 9600bps, 19200bps, 38400bps, 115200bps

CONTROL ID CONTROL ID NUMBER 1 1–254CONTROL ID OFF OFF, ON

REMOTE SENSOR FRONT/BACK FRONT/BACK, FRONT, BACK, HDBase-T

BEEP ON OFF, ON

68



SETUP

NETWORK SETTINGS

WIRED LAN

PROFILES DISABLE, PROFILE 1, PROFILE 2DHCP OFF, ONIP ADDRESS 192�168�0�10SUBNET MASK 255�255�255�0GATEWAY 192�168�0�1AUTO DNS OFF, ONDNS CONFIGURATIONRECONNECT

PROJECTOR NAME PROJECTOR NAME PA622U Series

DOMAIN HOST NAME necpjDOMAIN NAME

ALERT MAIL

ALERT MAIL OFF, ONHOST NAMEDOMAIN NAMESENDER'S ADDRESSSMTP SERVER NAMERECIPIENT'S ADDRESS 1RECIPIENT'S ADDRESS 2RECIPIENT'S ADDRESS 3TEST MAIL

NETWORK SERVICE

HTTP SERVER

NEW PASSWORDCONFIRM PASSWORD

PJLink NEW PASSWORDCONFIRM PASSWORD

AMX BEACON OFF, ON

SOURCE OPTIONS

AUTO ADJUST NORMAL OFF, NORMAL, FINE

COLOR SYSTEM BNC(VIDEO) AUTO AUTO, NTSC3�58, NTSC4�43, PAL, PAL-M, PAL-N, PAL60, SECAMBNC(Y/C) AUTO AUTO, NTSC3�58, NTSC4�43, PAL, PAL-M, PAL-N, PAL60, SECAM

AUDIO SELECT

HDMI1 HDMI1 HDMI1, BNCHDMI2 HDMI2 HDMI2, BNCDisplayPort DisplayPort DisplayPort, BNCHDBaseT HDBaseT HDBaseT, BNC

DEFAULT INPUT SELECT LAST LAST, AUTO, HDMI1, HDMI2, DisplayPort, BNC, BNC(CV), BNC(Y/C), COMPUTER, HDBaseT

SEAMLESS SWITCHING OFF OFF, ON

CLOSED CAPTION OFF OFF, CAPTION1, CAPTION2, CAPTION3, CAPTION4, TEXT1, TEXT2, TEXT3, TEXT4

BACKGROUND BLUE BLUE, BLACK, LOGO

POWER OPTIONS

STANDBY MODE NORMAL NORMAL, HDBaseT STANDBYDIRECT POWER ON OFF OFF, ONAUTO POWER ON SELECT OFF OFF, HDMI1, HDMI2, DisplayPort, COMPUTER, HDBaseTAUTO POWER OFF 1:00 OFF, 0:05, 0:10, 0:15, 0:20, 0:30, 1:00OFF TIMER OFF OFF, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00

RESET

CURRENT SIGNALALL DATAALL DATA (INCLUDING ENTRY LIST)CLEAR LAMP HOURSCLEAR FILTER HOURS

69



INFO�

USAGE TIME

LAMP LIFE REMAININGLAMP HOURS USEDFILTER HOURS USEDTOTAL CARBON SAVINGS

SOURCE(1)

INPUT TERMINALRESOLUTIONHORIZONTAL FREQUENCYVERTICAL FREQUENCYSYNC TYPESYNC POLARITYSCAN TYPESOURCE NAMEENTRY NO�

SOURCE(2)

SIGNAL TYPEVIDEO TYPEBIT DEPTHVIDEO LEVELLINK RATELINK LANE3D FORMAT

WIRED LAN

IP ADDRESSSUBNET MASKGATEWAYMAC ADDRESS

VERSION(1)FIRMWAREDATASUB-CPU

OTHERS

DATE TIMEPROJECTOR NAMEMODEL NO�SERIAL NUMBERCONTROL ID (when [CONTROL ID] is set)

CONDITIONS

INTAKE TEMPERATUREEXHAUST TEMPERATUREINSTALLATION POSITIONX-AXISY-AXISZ-AXIS

HDBaseT

SIGNAL QUALITYOPERATION MODELINK STATUSHDMI STATUS

70


❹ Menu Descriptions & Functions [INPUT]

1:HDMI1ThisprojectsthevideoofthedeviceconnectedtotheHDMI1INterminal.

2:HDMI2ThisprojectsthevideoofthedeviceconnectedtotheHDMI2INterminal.

3:DisplayPortThisprojectsthevideoofthedeviceconnectedtotheDisplayPortinputterminal.

4:BNCThisprojectsthevideoofthedeviceconnectedtothevideoinputterminal.(ThisprojectstheanalogRGBsignalorcomponentsignal.)

5:BNC(CV)ThisprojectsthevideoofthedeviceconnectedtotheBNC(CV)videoinputterminal.(Thisprojectsthecompositevideosignal.)

6:BNC(Y/C)ThisprojectsthevideoofthedeviceconnectedtotheBNC(Y/C)videoinputterminal.(ThisprojectstheS-videosignal.)

7:COMPUTERThisprojectsthevideoofthedeviceconnectedtothecomputervideoinputterminal.(ThisprojectstheanalogRGBsignalorcomponentsignal.)

8:HDBaseTProjectingtheHDBaseTorWIREDLANsignal.

ENTRY LISTDisplaysalistofsignals.Seethefollowingpages.

TEST PATTERNClosesthemenuandswitchestothetestpatternscreen.

71


UsingtheEntryListWhenanysourceadjustmentsaremade,theadjustmentsareautomaticallyregisteredintheEntryList.The(adjust-mentvaluesof)registeredsignalscanbeloadedfromtheEntryListwhenevernecessary.However,onlyupto100patternscanberegisteredintheEntryList.When100patternshavebeenregisteredintheEntryList,anerrormessageisthendisplayedandnoadditionalpatternscanberegistered.Youshouldthusdelete(adjustmentvaluesof)signalsthatarenolongerneeded.

DisplayingtheEntrylist1. Press the MENU button.


2. Press the ◀ or ▶buttontoselect[INPUT].

TheINPUTlistwillbedisplayed.

3. Use the ◀, ▶, ▲, or ▼toselect[ENTRYLIST]andpresstheENTERbutton.

TheENTRYLISTwindowswillbedisplayed.

IftheENTRYLISTwindowisnotdisplayed,switchthemenuto[ADVANCED].

Toswitchthemenubetween[ADVANCED]and[BASIC],select[SETUP]→[CONTROL]→[TOOLS]→[ADMIN-ISTRATORMODE]→[MENUMODE].(→page99)

72


EnteringthecurrentlyprojectedsignalintotheEntryList[STORE]

1. Press the ▲ or ▼ button to select any number.

2. Press the ◀ or ▶buttontoselect[STORE]andpresstheENTERbutton.

CallingupasignalfromtheEntryList[LOAD]Pressthe▲ or ▼buttontoselectasignalandpresstheENTERbutton.

EditingasignalfromtheEntryList[EDIT]

1. Press the ▲ or ▼ button to select a signal you wish to edit.

2. Press the ◀, ▶, ▲, or ▼buttontoselect[EDIT]andpresstheENTERbutton.

TheEditwindowwillbedisplayed.

SOURCENAME Enterasignalname.Upto18alphanumericcharacterscanbeused.INPUT Theinputterminalcanbechanged.SwitchingbetweenHDMI1/HDMI2/DisplayPort/BNC/

BNC(CV)/BNC(Y/C)/Computerispossible.LOCK Setso that theselectedsignalcannotbedeletedwhen [ALLDELETE] isexecuted.The

changesmadeafterLOCKexecutioncannotbesaved.SKIP Setsothattheselectedsignalwillbeskippedduringautosearch.

3. Settheaboveitemsandselect[OK]andpresstheENTERbutton.

NOTE: The input terminal cannot be changed to the currently projected signal.

73


CuttingasignalfromtheEntryList[CUT]

1. Press the ▲ or ▼ button to select a signal you wish to delete.

2. Press the ◀, ▶, ▲, or ▼buttontoselect[CUT]andpresstheENTERbutton.

ThesignalwillbedeletedfromtheEntryListandthedeletedsignalwillbedisplayedontheclipboardatthebottomoftheEntryList.

NOTE:• Thecurrentlyprojectedsignalcannotbedeleted.• Whenthelockedsignalisselected,itwillbedisplayedingraywhichindicatesitisnotavailable.

TIP:• DataontheclipboardcanbepassedontotheEntryList.• DataontheclipboardwillnotbelostaftertheEntryListisclosed.

CopyingandpastingasignalfromtheEntryList[COPY]/[PASTE]

1. Press the ▲ or ▼ button to select a signal you wish to copy.

2. Press the ◀, ▶, ▲, or ▼buttontoselect[COPY]andpresstheENTERbutton.

ThecopiedsignalwillbedisplayedontheclipboardatthebottomoftheEntryList.

3. Press the ◀ or ▶ button to move to the list.

4. Press the ▲ or ▼ button to select a signal.

5. Press the ◀, ▶, ▲, or ▼buttontoselect[PASTE]andpresstheENTERbutton.

Dataontheclipboardwillbepastedtothesignal.

DeletingallthesignalsfromtheEntryList[ALLDELTE]

1. Press the ◀, ▶, ▲, or ▼buttontoselect[ALLDELETE]andpresstheENTERbutton.

Theconfirmationmessagewillbedisplayed.

2. Press the ◀ or ▶buttontoselect[YES]andpresstheENTERbutton.

NOTE: The locked signal cannot be deleted.

74


❺ Menu Descriptions & Functions [ADJUST][PICTURE]

[MODE]Thisfunctionallowsyoutodeterminehowtosavesettingsfor[DETAILSETTINGS]of[PRESET]foreachinput.

STANDARD �� Saves settings for each item of [PRESET] (Preset 1 through 7)PROFESSIONAL �� Saves all the settings of [PICTURE] for each input�

NOTE: • When[TESTPATTERN]isdisplayed,[MODE]cannotbeselected.

[PRESET]Thisfunctionallowsyoutoselectoptimizedsettingsforyourprojectedimage.Youcanadjustneutraltintforyellow,cyanormagenta.Therearesevenfactorypresetsoptimizedforvarioustypesofimages.Youcanalsouse[DETAILSETTINGS]tosetuseradjustablesettingstocustomizeeachgammaorcolor.Yoursettingscanbestoredin[PRESET1]to[PRESET7].

HIGH-BRIGHT �� Recommended for use in a brightly lit room�PRESENTATION �� Recommended for making a presentation using a PowerPoint file�VIDEO �� Recommended for typical TV program viewing�MOVIE �� Recommended for movies�GRAPHIC �� Recommended for graphics�sRGB �� Standard color valuesDICOM SIM� �� Recommended for DICOM simulation format�

NOTE: • The[DICOMSIM.]optionisfortraining/referenceonlyandshouldnotbeusedforactualdiagnosis.• DICOMstandsforDigitalImagingandCommunicationsinMedicine.ItisastandarddevelopedbytheAmericanCollegeofRadiol-

ogy(ACR)andtheNationalElectricalManufacturersAssociation(NEMA). Thestandardspecifieshowdigitalimagedatacanbemovedfromsystemtosystem.

75


[DETAIL SETTINGS]

[GENERAL]Storing Your Customized Settings [REFERENCE]Thisfunctionallowsyoutostoreyourcustomizedsettingsin[PRESET1]to[PRESET7].First,selectabasepresetmodefrom[REFERENCE],thenset[GAMMACORRECTION]and[COLORTEMPERA-TURE].

HIGH-BRIGHT �� Recommended for use in a brightly lit room�PRESENTATION �� Recommended for making a presentation using a PowerPoint file�VIDEO �� Recommended for typical TV program viewing�MOVIE �� Recommended for movies�GRAPHIC �� Recommended for graphics�sRGB �� Standard color values�DICOM SIM� �� Recommended for DICOM simulation format�

Selecting Gamma Correction Mode [GAMMA CORRECTION]Eachmodeisrecommendedfor:

DYNAMIC �� Creates a high-contrast picture�NATURAL �� Natural reproduction of the picture�BLACK DETAIL �� Emphasizes detail in dark areas of the picture�

NOTE:Thisfunctionisnotavailablewhen[DICOMSIM.]isselectedfor[DETAILSETTINGS].

Selecting Screen Size for DICOM SIM [SCREEN SIZE]Thisfunctionwillperformgammacorrectionappropriateforthescreensize.

LARGE �� For screen size of 150"MEDIUM �� For screen size of 100"SMALL �� For screen size of 50"

NOTE:Thisfunctionisavailableonlywhen[DICOMSIM.]isselectedfor[DETAILSETTINGS].

76


Adjusting Color Temperature [COLOR TEMPERATURE]Thisoptionallowsyoutoselectthecolortemperatureofyourchoice.Avaluebetween5000Kand10500Kcanbesetin100Kunits.

NOTE:When[PRESENTATION]or[HIGH-BRIGHT]isselectedin[REFERENCE],thisfunctionisnotavailable.

Adjusting Brightness and Contrast [DYNAMIC CONTRAST]Whenset,themostoptimalcontrastratioisadjustedaccordingtothevideo.

OFF �� Dynamic contrast is disabled�MOTION IMAGE �� Most optimal settings for moving images�STILL IMAGE �� Most optimal settings for static images� Rapidly follows any changes in the video�

NOTE:• Dependingontheconditions,projectorsettingssuchas[DYNAMICCONTRAST]maynotbeabletobeselected.

Adjusting White Balance [WHITE BALANCE]Thisallowsyoutoadjustthewhitebalance.Contrastforeachcolor(RGB)toadjustthewhitelevelofthescreen;Brightnessforeachcolor(RGB)isusedtoadjusttheblacklevelofthescreen.

[COLOR CORRECTION]Correctsthecolorforallsignals.Adjuststhetoneforthecolorsred,green,blue,yellow,magentaandcyan.

RED HUE +Direction Magentadirection−Direction Yellowdirection

SATURATION +Direction Vivid−Direction Weak

GREEN HUE +Direction Yellowdirection−Direction Cyandirection


BLUE HUE +Direction Cyandirection−Direction Magentadirection


YELLOW HUE +Direction Reddirection−Direction Greendirection


MAGENTA HUE +Direction Bluedirection−Direction Reddirection


CYAN HUE +Direction Greendirection−Direction Bluedirection


[CONTRAST]Adjuststheintensityoftheimageaccordingtotheincomingsignal.

[BRIGHTNESS]Adjuststhebrightnesslevelorthebackrasterintensity.

[SHARPNESS]Controlsthedetailoftheimage.

77


[COLOR]Increasesordecreasesthecolorsaturationlevel.

[HUE]Variesthecolorlevelfrom+/−greento+/−blue.Theredlevelisusedasreference.

Inputsignal CONTRAST BRIGHTNESS SHARPNESS COLOR HUE

RGBsystemof“COMPUTER/Display-Port/HDMI/HDBaseT”

Yes Yes Yes No No

COMPONENTsystemof“COMPUTER/DisplayPort/HDMI/HDBaseT”

Yes Yes Yes Yes Yes

CompositeVideo/S-Video Yes Yes Yes Yes Yes

Yes=Adjustable,No=Notadjustable

NOTE:• When[TESTPATTERN]isdisplayed,[CONTRAST],[BRIGHTNESS],[SHARPNESS],[COLOR]and[HUE]cannotbeadjusted.

[RESET]Thesettingsandadjustmentsfor[PICTURE]willbereturnedtothefactorysettingswiththeexceptionofthefollowing;Presetnumbersand[REFERENCE]withinthe[PRESET]screen.Thesettingsandadjustmentsunder[DETAILSETTINGS]withinthe[PRESET]screenthatarenotcurrentlyselectedwillnotbereset.

78


[IMAGE OPTIONS]

AdjustingClockandPhase[CLOCK/PHASE]ThisallowsyoutomanuallyadjustCLOCKandPHASE.

CLOCK �� Use this item to fine tune the computer image or to remove any vertical banding that might appear� This function adjusts the clock frequencies that eliminate the horizontal banding in the image�This adjustment may be necessary when you connect your computer for the first time�

PHASE �� Use this item to adjust the clock phase or to reduce video noise, dot interference or cross talk� (This is evident when part of your image appears to be shimmering�)Use [PHASE] only after the [CLOCK] is complete�

NOTE:The[CLOCK]and[PHASE]itemsareavailableforRGBsignalsonly.

79


AdjustingHorizontal/VerticalPosition[HORIZONTAL/VERTICAL]Adjuststheimagelocationhorizontallyandvertically.

• Animagecanbedistortedduringtheadjustmentof[CLOCK]and[PHASE].Thisisnotmalfunction.

• Theadjustments for [CLOCK], [PHASE], [HORIZONTAL],and[VERTICAL]willbestored inmemoryfor thecurrentsignal.Thenexttimeyouprojectthesignalwiththesameresolution,horizontalandverticalfrequency,itsadjustmentswillbecalledupandapplied.

Todeleteadjustmentsstoredinmemory,fromthemenu,youselect[RESET]→[CURRENTSIGNAL]andresettheadjustments.

[BLANKING]Adjuststhedisplayrange(blanking)atthetop,bottom,leftandrightedgesoftheinputsignal.

SelectingOverscanPercentage[OVERSCAN]Selectoverscanpercentage(Auto,0%,5%and10%)forsignal.

Projectedimage

Overscanedby10%

NOTE: • The[OVERSCAN]itemisnotavailable: -when[NATIVE]isselectedfor[ASPECTRATIO].

80


Selecting the Aspect Ratio [ASPECT RATIO]Usethisfunctiontoselectthescreen’svertical:horizontalaspectratio.Selectthescreentype(4:3screen,16:9screenor16:10screen)atthescreensettingbeforesettingtheaspectratio.(→page97)Theprojectorautomaticallyidentifiesthesignalbeinginputandsetstheoptimumaspectratio.

For Computer signal

ForComponent/Video/S-Videosignals

Whenthescreentypeissetto4:3 Whenthescreentypeissetto16:9or16:10

Resolution AspectRatioVGA 640×480 4:3SVGA 800×600 4:3XGA 1024×768 4:3WXGA 1280×768 15:9WXGA 1280×800 16:10HD(FWXGA) 1366×768 approx.16:9WXGA+ 1440×900 16:10SXGA 1280×1024 5:4SXGA+ 1400×1050 4:3WXGA++ 1600×900 16:9UXGA 1600×1200 4:3WSXGA+ 1680×1050 16:10FHD(1080P) 1920×1080 16:9WUXGA 1920×1200 16:10WQXGA 2560×1600 16:10

Options Function

AUTO Theprojectorwillautomaticallydeterminetheincomingsignalanddisplayitinitsaspectratio.Theprojectormayerroneouslydeterminetheaspectratiodependingonitssignal.Ifthisoccurs,selecttheappropriateaspectratiofromthefollowing.

4:3 Theimageisdisplayedin4:3aspectratio.

5:4 Theimageisdisplayedin5:4aspectratio




81


Options Function

NATIVE Theprojectordisplaysthecurrentimageinitstrueresolutionwhentheincomingcomputersignalhasalowerorhigherresolutionthantheprojector’snativeresolution.(→page2)Whentheincomingcomputersignalhasahigherresolutionthantheprojector'snativeresolution,thecenterofanimagewillbedisplayed.

LETTERBOX Theimageofaletterboxsignal(16:9)isstretchedequallyinthehorizontalandverticaldirectionstofitthescreen.

WIDESCREEN Theimageofasqueezesignal(16:9)isstretchedleftandrightin16:9.

ZOOM Theimageofasqueezesignal(16:9)isstretchedleftandrightin4:3.Partsofthedisplayedimagearecroppedattheleftandrightedgesandthereforenotvisible.

FULL Projecttofullscreensize.

TIP:• Imagepositioncanbeadjustedverticallyusing[POSITION]whenthe[16:9],[15:9],or[16:10]aspectratiosareselected.• Theterm“letterbox”referstoamorelandscape-orientedimagewhencomparedtoa4:3image,whichisthestandardaspect

ratio for a vide source. Theletterboxsignalhasaspectratioswiththevistasize“1.85:1”orcinemascopesize“2.35:1”formoviefilm.• Theterm“squeeze”referstothecompressedimageofwhichaspectratioisconvertedfrom16:9to4:3.

[INPUT RESOLUTION]TheresolutionisassignedautomaticallywhentheresolutionoftheinputsignalfromthecomputervideoinputterminalorBNCvideoinputterminal(analogRGB)cannotbedistinguished.

82


[VIDEO]

Using Noise Reduction [NOISE REDUCTION]Whenprojectingavideoimage,youcanusethe[NOISEREDUCTION]functiontoreducethescreennoise(roughnessanddistortion).Thisdeviceisequippedwiththreetypesofnoisereductionfunctions.Selectthefunctionaccordingtothetypeofnoise.Dependingonthenoiselevel,thenoisereductioneffectcanbesetto[OFF],[LOW],[MEDIUM]or[HIGH].[NOISEREDUCTION]canbeselectedforSDTV,HDTVsignalandcomponentsignalinput.

RANDOM NR �� Reduces flickering random noise in an image� MOSQUITO NR �� Reduces mosquito noise that appears around the edges of an image during Blu-ray playback�BLOCK NR �� Reduces block noise or mosaic-like patterns by selecting ON�

Selecting Interlaced Progressive Conversion Process Mode [DEINTERLACE]Thisfunctionallowsyoutoselectaninterlaced-to-progressiveconversionprocessforvideosignals.

NORMAL �� Automatically distinguishes a moving image from a static image to create a distinct image� Please select [MOVIE] if there are any obvious jitter and noises�

MOVIE �� Select when projecting moving images� This is suitable for signals with a lot of jitter and noise�STILL �� Select when projecting static images� The video will flicker when a moving image is projected�

NOTE:ThisfunctionisnotavailablewithRGBsignals.

[CONTRAST ENHANCEMENT]Usingthecharacteristicsofthehumaneye,apicturequalitywithasenseofcontrastandresolutionisachieved.

OFF �� Suite vision is switched off�AUTO �� Contrast and picture quality are automatically improved using the suite vision function�NORMAL �� Adjust the gain manually�

83


[SIGNAL TYPE]SelectionofRGBandcomponentsignals.Normally,thisissetto[AUTO].Pleasechangethesettingifthecoloroftheimageremainsunnatural.

AUTO �� Automatically distinguishes RGB and component signals�RGB �� Switches to the RGB input�COMPONENT �� Switches to the component signal input�

[VIDEOLEVEL]SelectionofthevideosignallevelwhenconnectinganexternaldevicetotheHDMI1INterminal,HDMI2INterminal,DisplayPortinputterminal,andHDBaseTinputterminaloftheprojector.

AUTO �� The video level is switched automatically based on the information from the device outputting the signal�Depending on the connected device, this setting may not be made properly� In this case, switch to [NORMAL” or “ENHANCED” from the menu and view with the optimum setting�

NORMAL �� This disables the enhanced mode�ENHANCED �� This improves the image’s contrast, expressing the dark and light sections more dynamically�SUPER WHITE �� The video contrast is improved and the dark areas appear more dynamic�

84


[3D SETTINGS]

Pleasereferto“3-8Projecting3Dvideos”(→page39)fortheoperation.

STEREOVIEWERStackupasingleormultipleprojectorsandcarryoutthesettingsforprojecting3Dvideos.Selecttheleft/rightset-tingsofthe3Deyewearusingthestereoviewer.

SINGLE �� Use a single projector to project 3D videos�DUAL LEFT �� Use a dedicated projector for displaying videos on the left�DUAL RIGHT �� Use a dedicated projector for displaying videos on the right�

STEREO FILTERStackupasingleormultipleprojectorsandcarryoutthesettingsforprojecting3Dvideos.Imagesettingfor3DglassesmadebyInfitec.

SINGLE �� Use a single projector to project 3D videos�DUAL LEFT �� Use a dedicated projector for displaying videos on the left�DUAL RIGHT �� Use a dedicated projector for displaying videos on the right�

FORMATSelectthe3Dvideoformat(recording/transmissionformat).Selecttomatchthe3Dbroadcastand3Dmedia.Nor-mally,[AUTO]isselected.Pleaseselectthe3Dinputsignalformatwhenthe3Ddetectionsignaloftheformatcannotbedistinguished.

L/RINVERTInvertthedisplayorderoftheleftandrightvideos.Select[ON]ifyoufeeluncomfortablewiththe3Ddisplaywhen[OFF]isselected.

85


❻ Menu Descriptions & Functions [DISPLAY][PIP/PICTURE BY PICTURE]

SUB INPUTSelecttheinputsignaltobedisplayedinthesub-display.Pleasereferto“4-2DisplayingTwoPicturesattheSameTime”(→page52)fordetailsontheoperation.

MODESelecteitherPIPorPICTUREBYPICTUREwhenswitchingto2-screendisplay.

PICTURE SWAPThevideosinthemaindisplayandsub-displaywillbeswitched.Pleasereferto“4-2DisplayingTwoPicturesattheSameTime”(→page54)fordetails.

PIP SETTINGSelectthedisplayposition,positionadjustmentandsizeofthesub-displayinthePIPscreen.

START POSITION �� Selection of the display position of the sub-display when switching to the PIP screen�HORIZONTAL POSITION �� Adjust the display position of the sub-display in the horizontal direction� The respective corners will serve

as reference points�VERTICAL POSITION �� Adjust the display position of the sub-display in the vertical direction� The respective corners will serve as

reference points�SIZE �� Select the display size of the sub-display�

86


TIP:Thehorizontalpositionandverticalpositionaretheamountofmovementfromthereferencepoints.Forexample,whenTOP-LEFTis adjusted, the position is displayed with the same amount of movement even if displayed with other starting positions.The maximum amount of movement is half the resolution of the projector.

ReferencepointAdjustusingthehorizon-talposition

Sub-display Maindisplay

Referencepoint

Adjustusingtheverticalposition

TOP-LEFT TOP-RIGHT

BOTTOM-LEFT BOTTOM-RIGHT

ReferencepointReferencepoint

BORDERSelectthedisplayboundaryofthemaindisplayandsub-displayofthe[PICTUREBYPICTURE]screen.

Displayboundary

Maindisplay Sub-displayMaindisplay Sub-display MaindisplaySub-display

TIP:• ForPA622U/PA522U,sixstagescanbeselected.• ForPA672W/PA572W/PA722X/PA622X,threestagescanbeselected.

87


[GEOMETRIC CORRECTION]

KEYSTONEDisplaythetrapezoidcorrectionscreenandadjustthetrapezoidaldistortionoftheprojectionscreen.Todisplaythe[KEYSTONE]screen,select→[DISPLAY]→[GEOMETRICCORRECTION]→[KEYSTONE]intheon-screenmenu.The[GEOMETRICCORRECTION]screencanalsobedisplayedbypressingtheGeometric.buttonontheremotecontrol.

HORIZONTAL �� Adjustments when projecting from a diagonal direction to the screen�

VERTICAL �� Adjustments when projecting from the top or bottom direction to the screen�

TILT �� Adjusts the distortion when performing trapezoidal correction with the screen moved in the vertical direction using the lens shift�

THROW RATIO �� Adjusts according to the projection ratio of the optional lens used�

Modelnameoflensunit

Adjustmentrange

NP11FL 8NP30ZL 8–10NP12ZL 12–15NP13ZL 15–30NP14ZL 29–47NP15ZL 46–71

NOTE:• Whenpowerissuppliedtothedevice,theadjustmentvalueofthe[KEYSTONE]usedpreviouslyisretainedevenifthegradient

of the device is changed.• Whenclearingtheadjustmentvalueof[KEYSTONE],presstheGeometric.buttonfor2ormoreseconds.• Whensettingother[GEOMETRICCORRECTION]functions,the[KEYSTONE]menucannotbeselected.Whenperformingtrapezoidal

correction,presstheGeometric.buttonfor2ormoresecondstocleartheadjustmentvalueof[GEOMETRICCORRECTION].• Aselectricalcorrection iscarriedoutby [KEYSTONE], thebrightnessmaybe reducedor thescreenqualitymaydeteriorate

sometimes.

88


CORNERSTONEDisplaythe4-pointcorrectionscreenandadjustthetrapezoidaldistortionoftheprojectionscreen.Pleasereferto“CorrectingHorizontalandVerticalKeystoneDistortion[CORNERSTONE]”(→page33)fordetailsontheoperation.

HORIZONTALCORNER/VERTICALCORNERDistortioncorrectionforcornerprojectionsuchaswallsurfaces.

HORIZONTAL CORNER �� Performs correction for projection onto a wall lying at an angle to the horizontal direction�

* Reverse angle correction is also possible�VERTICAL CORNER �� Performs correction for projection onto a wall lying at an angle to the vertical direction�

* Reverse angle correction is also possible�

NOTE:• Whenthemaximumadjustmentrangeisexceeded,distortionadjustmentisdisabled.Setuptheprojectoratanoptimalangleas

the deterioration in the image quality increases as the distortion adjustment volume gets larger.• Pleasenotethattheimagewillgooutoffocusduetothedifferenceinthedistancebetweentheupperandlowerorleftandright

sidesandthecenterofthescreenforprojectionscuttingacrosscorners.Lenseswithshortfocalpointsarealsonotrecommendedfor projections cutting across corners as the image will go out of focus.

89


Adjustment method1. Alignthecursorwiththe[HORIZONTALCORNER]or[VERTICALCORNER]ofthe[GEOMETRICCORREC-

TION]menuandthenpresstheENTERbutton.

• Theadjustmentscreenwillbedisplayed.

2. Press the ▼▲◀▶ buttons to align the cursor (yellow box) with the target adjustment point and then press the ENTER button.

• Thecursorwillchangeintoanadjustmentpoint(yellowincolor).

3. Press the ▼▲◀▶ buttons to adjust the corners or sides of the screen and then press the ENTER button.

• Theadjustmentpointwillgobacktobeingacursor(yellowbox).

Explanationofscreentransition

• Theadjustmentpointsofthefourcorners(a,c,fandhinthedrawing)willmoveindependently.

• Thefollowingadjustmentpointsdifferatthe[HORIZONTALCORNER]and[VERTICALCORNER].

HORIZONTALCORNER:WhenPointbinthedrawingismoved,andtheuppersideandPointgaremoved,thelowersidewillmoveinaparallelmanner.

VERTICALCORNER:WhenPointdinthedrawingismoved,andtheleftsideandPointearemoved,therightsidewillmoveinaparallelmanner.

[Adjustmentpointsofthe[HORIZONTALCORNER]screenandmovementpointsoftheprojectionscreen]

a

b

b c

d e

f g h

a c

d e

fg

h

PointbwillbedisplacedinaparallelmanneratthesametimeasPointsa,b,c

PointgwillbedisplacedinaparallelmanneratthesametimeasPointsf,g,h

[Adjustmentpointsofthe[VERTICALCORNER]screenandmovementpointsoftheprojectionscreen]

a

a

b

bc

cd

dee

f

f

g

gh

h

PointdwillbedisplacedinaparallelmanneratthesametimeasPointsa,d,f

PointewillbedisplacedinaparallelmanneratthesametimeasPointsf,g,h

4. Start from Step 2 onwards to adjust the other points.

5. When the adjustment is completed, press the ▼▲◀▶buttonstoalignthecursorwiththe[EXIT]intheadjustment screen and then press theENTER button.

• Switchtothe[GEOMETRICCORRECTION]menuscreen.

90


PINCUSHIONAdjustthecurvedistortionoftheprojectionscreen.

TOP �� Adjust the curve distortion of the upper edge of the projection screen�

BOTTOM �� Adjust the curve distortion of the lower edge of the projection screen�

LEFT �� Adjust the curve distortion of the left edge of the projection screen�

RIGHT �� Adjust the curve distortion of the right edge of the projection screen�

TOP

LEFT RIGHT

BOTTOM

PC TOOLRecallthegeometriccorrectiondatathatisregisteredintheprojectorbeforehand.Therearethreetypesofregistereddata.

NOTE:• KEYSTONE,CORNERSTONE,andPINCUSHIONcannotbeselectedwhensettingthegeometriccorrectionusingaPCtool.• Toclearthe[GEOMETRICCORRECTION]datathathasbeensetup,presstheGeometric.buttonfor2ormoreseconds.• Aselectricalcorrectioniscarriedout ingeometriccorrection,thebrightnessmaybeaffectedandthepicturequalitymaybe

degraded.

RESETResettheadjustmentvaluethathasbeensetupinGEOMETRICCORRECTION(returntotheinitialvalue).

91


[EDGE BLENDING]

Thisadjuststheedges(boundaries)oftheprojectionscreenwhenprojectinghighresolutionvideosusingacombina-tionofseveralprojectorsintheup,down,leftandrightpositions.

MODEThisenablesordisablestheEDGEBLENDINGfunction.WhenMODEissettoON,theTOP,BOTTOM,LEFT,RIGHTandBLACKLEVELsettingscanbeadjusted.

TOP/BOTTOM/LEFT/RIGHTThisselectstheEDGEBLENDINGlocationsontheleft,right,topandbottomonthescreen.Thefollowingsettingscanbeadjustedwhenanitemisselected.(→page57)

CONTROL �� Enable TOP, BOTTOM, LEFT and RIGHT functions�MARKER �� Set whether to display marker or not when adjusting the range and display position� When turned on, a

magenta marker for adjusting the range adjustment and a green marker for adjusting the display position will be displayed�

RANGE �� Adjust the range (width) of the edge blending�POSITION �� Adjust the display position of the edge blending�

BLACKLEVELDividethescreenintoninepartsandkeeptheblackleveluniformforeachprojector.TheninedivisionsscreensareTOP-LEFT,TOP-CENTER,TOP-RIGHT,CENTER-LEFT,CENTER,CENTER-RIGHT,BOTTOM-LEFT,BOTTOM-CENTERandBOTTOM-RIGHT.(→page60)

92


[MULTI SCREEN]

WHITE BALANCEThisadjuststhewhitebalanceforeachprojectorwhenprojectingusingacombinationofseveralprojectors.Thiscanbeadjustedwhen[MODE]issetto[ON].

BRIGHTNESS W, BRIGHTNESS R, BRIGHTNESS G, BRIGHTNESS B �� Adjusting the black color of the video�CONTRAST W, CONTRAST R, CONTRAST G, CONTRAST B �� Adjusting the white color of the video�

PICTURE SETTINGThissetsthedivisionconditionwhenprojectingusingacombinationofseveralprojectors.Pleasereferto“4.Multi-ScreenProjection”(→page48)fordetails.

MODE OFF Usetheprojectorinastandalonestate.

ZOOM Thisadjuststhepositionandwidthofthevideoareathatyouwishtodivide.Theedgeblendingwidthwillalsobeautomaticallysettothatwidth.

TILING Thisassignsthedividedscreenstotheprojectors.Theedgeblendingfunctionwillalsobesetautomatically.

ZOOM HORIZONTALZOOM

Thisenlargesthevideoareainthehorizontaldirection.

VERTICALZOOM

Thisenlargesthevideoareaintheverticaldirection.

HORIZONTALPOSITION

Thisshiftsthevideoareainthehorizontaldirection.

VERTICALPO-SITION

Thisshiftsthevideoareaintheverticaldirection.

TILING WIDTH Thisselectsthenumberofprojectorstobearrangedhorizontally.

HEIGHT Thisselectsthenumberofprojectorstobearrangedvertically.

HORIZONTALPOSITION

Thisselectsthepositionoftheprojectorstartingfromtheleftamongthosearrangedhorizontally.

VERTICALPO-SITION

Thisselectsthepositionoftheprojectorstartingfromthetopamongthosearrangedvertically.

93


Conditions for using tilingAlltheprojectorsneedtofulfilthefollowingconditions.• Thepanelsizemustbethesame• Theprojectionscreensizemustbethesame• Theleftandrightendsortopandbottomendsoftheprojectionscreenmustbeconsistent.• Thesettingsfortheleftandrightedgesoftheedgeblendingarethesame• ThesettingsforthetopandbottomedgesoftheedgeblendingarethesameIfthetilingconditionsaresatisfied,thevideoscreenoftheprojectorateachinstallationpositionwillbeautomaticallyextractedandprojected.Ifthetilingconditionsarenotsatisfied,adjustthevideoscreenoftheprojectorateachinstallationpositionusingthezoomfunction.

Tilingsettingexample)Numberofhorizontalunits=2,Numberofverticalunits=2

Horizontalorder=SecondunitVerticalorder=Firstunit

94


❼ Menu Descriptions & Functions [SETUP]

[MENU]

Selecting Menu Language [LANGUAGE] Youcanchooseoneof29languagesforon-screeninstructions.

NOTE:Yoursettingwillnotbeaffectedevenwhen[RESET]isdonefromthemenu.

Selecting Menu Color [COLOR SELECT]Youcanchoosebetweentwooptionsformenucolor:COLORandMONOCHROME.

TurningOn/OffSourceDisplay[INPUTDISPLAY]ThisoptionturnsonoroffinputnamedisplaysuchasHDMI1,HDMI2,DisplayPort,BNC,BNC(CV),BNC(Y/C),COM-PUTER,HDBaseTtobedisplayedonthetoprightofthescreen.

Turning messages on and off [MESSAGE DISPLAY]Thisoptionselectswhetherornottodisplayprojectormessagesatthebottomoftheprojectedimage.Evenwhen“OFF”isselected,thesecuritylockwarningisdisplayed.Thesecuritylockwarningturnsoffwhenthesecuritylockiscanceled.

TurningON/OFFControlID[IDDISPLAY]ID DISPLAY �� This option turns on or off the ID number which is displayed when the ID SET button on the remote control

is pressed� (→ page 105)

95


TurningOn/OffEcoMessage[ECOMESSAGE]Thisoptionturnsonoroffthefollowingmessageswhentheprojectoristurnedon.

TheEcoMessagepromptstheusertosaveenergy.When[OFF]isselectedfor[ECOMODE],youwillgetamessagetopromptyoutoselect[ON]for[ECOMODE].

When[ON]isselectedfor[ECOMODE]

Toclosethemessage,pressanyoneofthebuttons.Themessagewilldisappearifnobuttonoperationisdonefor30seconds.

When[OFF]isselectedfor[ECOMODE]

PressingtheENTERbuttonwilldisplaythe[ECOMODE]screen.(→page98)Toclosethemessage,presstheEXITbutton.

[3D CAUTION MESSAGE]Thisselectswhethertodisplayacautionmessageornotwhenswitchingtoa3Dvideo.ThedefaultconditionwhenshippedfromthefactoryisON.

OFF �� The 3D caution message screen will not be displayed�ON �� The 3D caution message screen will be displayed when switching to a 3D video� Press the ENTER button

to cancel the message�• Themessagewilldisappearautomaticallyafter60secondsorwhenotherbuttonsarepressed.Ifitdisap-

pears automatically, the 3D caution message will be displayed again when switching to a 3D video�

SelectingMenuDisplayTime[DISPLAYTIME]Thisoptionallowsyoutoselecthowlongtheprojectorwaitsafterthelasttouchofabuttontoturnoffthemenu.Thepresetchoicesare[MANUAL],[AUTO5SEC],[AUTO15SEC],and[AUTO45SEC].The[AUTO45SEC]isthefac-torypreset.

Selecting Interval Time for Filter Message [FILTER MESSAGE]Thisoptionallowsyoutoselectthetimepreferencebetweendisplayingthemessageforcleaningthefilters.Cleanthefilterwhenyougetthemessage“PLEASECLEANFILTER.”(→page138)Fiveoptionsareavailable:OFF,100[H],500[H],1000[H],2000[H]Thedefaultsettingis[OFF].


96


[INSTALLATION]

Selecting Projector Orientation [ORIENTATION]Thisreorientsyourimageforyourtypeofprojection.Theoptionsare:desktopfrontprojection,ceilingrearprojection,desktoprearprojection,andceilingfrontprojection.

NOTE: • Pleaseconsulttheretailstoreifyourequirespecialinstallationservicese.g.whenmountingtheprojectortoaceiling.Neverinstall

the projector on your own. This may result in the projector falling down and causing injury to people.• Whenusingtheprojectorsuspendedfromaceiling,ensurethatpeopledonotstaybelowtheprojector.Intheeventthelamp

were to break, there is a risk that glass fragments may fall from the projector.

AUTO �� This automatically detects and projects the DESKTOP FRONT and CEILING FRONT�

NOTE:• TheDESKTOPREARandCEILINGREARwillnotbedetected.Pleaseselectmanually.

DESKTOPFRONT CEILINGREAR

DESKTOPREAR CEILINGFRONT

TIP:• CheckwhethertheautomaticDESKTOPFRONTisinstalledwithin±10degreesforfloorinstallationandwhethertheCEILING

FRONTiswithin±10degreesforceilinginstallation.Selectmanuallywhentheprojectionscreenisinverted.

97


Selecting Aspect Ratio and Position for Screen [SCREEN TYPE]

Screentype Setstheaspectratiooftheprojectionscreen.

FREE Theratiooftheliquidcrystalpanelisselected.Selectthiswhenprojectingmulti-screenand17:9screen(2K).

4:3screen Forascreenwitha4:3aspectratio



NOTE:• Afterchangingthescreentype,checkthesettingof[ASPECTRATIO]inthemenu.(→ page 80)

Using the Wall Color Correction [WALL COLOR]

Thisfunctionallowsforquickadaptivecolorcorrectioninapplicationswherethescreenmaterialisnotwhite.

NOTE:Selecting[WHITEBOARD]reduceslampbrightness.

Selecting Fan Mode [FAN MODE]FanModeisusedtosetthespeedoftheinternalcoolingfan.

MODE �� Select three modes for fan speed: AUTO, HIGH, and HIGH ALTITUDE�AUTO: The built-in fans automatically run at a variable speed according to the internal temperature�HIGH: The built-in fans run at high speedHIGH ALTITUDE: The built-in fans run at a high speed� Select this option when using the projector at altitudes approximately 5500 feet/1600 meters or higher� To use the projector with ECO MODE ON in other installed conditions than desktop/ceiling with +/-20°, heed the following:(1) Select [HIGH ALTITUDE] for [MODE] at altitude 3200 feet/1000 meters�(2) Select [OFF] for [ECO MODE] at altitude 6800 feet/2100 meters or higher�

NOTE: • Makesurethespeedissetto[HIGH]whenyouareusingthisdevicecontinuouslyforseveraldays.•Set[FANMODE]to[HIGHALTITUDE]whenusingtheprojectorataltitudesapproximately5500feet/1600metersorhigher.• Usingtheprojectorataltitudesapproximately5500feet/1600metersorhigherwithoutsettingto[HIGHALTITUDE]cancause

the projector to overheat and the protector could shut down. If this happens, wait a couple minutes and turn on the projector.•Usingtheprojectorataltitudeslessthanapproximately5500feet/1600metersandsettingto[HIGHALTITUDE]cancausethe

lamptoovercool,causingtheimagetoflicker.Switch[FANMODE]to[AUTO].•Usingtheprojectorataltitudesapproximately5500feet/1600metersorhighercanshortenthelifeofopticalcomponentssuch

as the lamp.• Yoursettingwillnotbeaffectedevenwhen[RESET]isdonefromthemenu.

TIP: • When[HIGHALTITUDE]isselectedfor[FANMODE],asymbolicon will be displayed at the bottom of the menu.

98


[LAMP MODE]Wheneco-modeissetto[ON],theCO2emissions(calculatedfromthereductioninpowerconsumption)oftheprojec-torcanbereduced.Theeco-modereducespowerconsumptionbymainlyloweringthebrightnessofthelamp.Asaresult,thelampreplacementtime(asaguide)*isextended.(→page118)* Replacementtimenotguaranteed.

LAMP ADJUST �� This can be set when the eco-mode is set to [OFF]� Adjust the lamp to match the brightness of each projector when projecting a multi-screen display using multiple projectors�

ECOMODE OFF Thelampluminance(brightness)willbecome100%andthescreenwillturnbright.Theluminanceofthelampcanbesetusingthelampadjustment.

ON Thelampluminance(brightness)willbecomeapproximately80%andthelampreplacementtime(estimated)*willbeextended.* Thereplacementtimeisnotguaranteed.

LAMPADJUST Whenthe[ECOMODE]issetto[OFF],[LAMPADJUST]isenabled.Adjustthelamptomatchthebrightnessofeachprojectorwhenprojectingamulti-screendisplayusingmultipleprojectors.

[REF. WHITE BALANCE]Thisfeatureallowsyoutoadjustthewhitebalanceforallsignals.Thewhiteandblacklevelsofthesignalareadjustedforoptimumcolorreproduction.Uniformityisalsoadjustedwhentheredness(R)andblueness(B)ofthewhitecolorinthescreen’shorizontal(left/right)directionareuneven.

CONTRAST R/CONTRAST G/CONTRAST B �� These adjust the picture’s white color�BRIGHTNESS R/BRIGHTNESS G/BRIGHTNESS B �� These adjust the picture’s black color�UNIFORMITY R �� The further this is set to the + side, the stronger the redness on the left side of the picture (increasing

towards the left edge) and the weaker the redness on the right side of the picture (decreasing towards the right edge)�This is reversed when set to the – side�

UNIFORMITY B �� The further this is set to the + side, the stronger the blueness on the left side of the picture (increasing towards the left edge) and the weaker the blueness on the right side of the picture (decreasing towards the right edge)�This is reversed when set to the – side�

[STATICCONVERGENCE]Thisfeaturesallowsyoutoadjustforcolordeviationinthepicture.Thiscanbeadjustedinunitsof±1pixelinthehorizontaldirectionforHORIZONTALR,GandB,intheverticaldirec-tionforVERTICALR,GandB.

99


[CONTROL]

TOOLS

ADMINISTRATOR MODEThisallowsyoutoselectMENUMODE,savesettings,andsetapasswordfortheadministratormode.

MENUMODE Selecteither[BASIC]or[ADVANCED]menu.(→page64)

—

NOTSAVESETTINGVALUES

Placing a check mark will not save your projector settings�Clear this check box to save your projector settings�

—

NEWPASSWORD/CONFIRMPASS-WORD

Assignapasswordfortheadministratormode. Upto10alphanumericcharacters

100


PROGRAM TIMER

Thisoption turnson/standby theprojectorandchangesvideosignals,andselectsECOmodeautomaticallyataspecifiedtime.

NOTE:• Beforeusing[PROGRAMTIMER],makesurethatthe[DATEANDTIME]featureisset.(→ page 103) MakesurethattheprojectorisinthestandbyconditionwiththePOWERcordconnected. The projector has a built-in clock. The clock will keep working for about two weeks after the main power is turned off. If the main

power is not supplied to the projector for two weeks or more, the built-in clock stops working.

Setting a new program timer1. On the PROGRAM TIMER screen, use the ▲ or ▼buttontoselect[SETTINGS]andpresstheENTERbut-

ton.

The[PROGRAMLIST]screenwillbedisplayed.

2. Select a blank program number and press the ENTER button.

The[EDIT]screenwillbedisplayed.

3. Make settings for each item as required.

ACTIVE �� Place a check mark to enable the program�DAY �� Select days of the week for the program timer� To execute the program from Monday to Friday, select [MON-

101


FRI]� To execute the program in everyday basis, select [EVERYDAY]�TIME �� Set the time to execute the program� Enter time in 24-hour format�FUNCTION �� Select a function to be executed� Selecting [POWER] will allow you to turn on or off the projector by setting

[ADVANCED SETTINGS]� Selecting [INPUT] will allow you to select a video source by setting [ADVANCED SETTINGS]� Selecting [ECO MODE] will allow you to select [ECO MODE] by setting [ADVANCED SET-TINGS]�

ADVANCED SETTINGS �� Select power on/off, a type of video source, or ECO MODE for the selected item in [FUNCTION]�REPEAT �� Place a check mark to repeat the program continuing basis� To use the program this week only, clear the

check mark�4. Select[OK]andpresstheENTERbutton.

Thiswillcompletethesettings.

Youwillbereturnedtothe[PROGRAMLIST]screen.

5. Select[BACK]andpresstheENTERbutton.

Youwillbereturnedtothe[PROGRAMTIMER]screen.

6. Select[OK]andpresstheENTERbutton.

Youwillbereturnedtothe[TOOLS]screen.

NOTE:• Upto30differenttimersettingscanbeprogrammed.• When[PROGRAMTIMER]isturnedon,the[STANDBYMODE]settingisignored.• TheProgramTimerisexecutedonasettimebasis,notinaprogrambasis.• Oncetheprogramnotmarkedwithacheckin[REPEAT]hasbeenexecuted,thecheckmarkinthe[ACTIVE]checkboxwillbe

cleared automatically and the program will be disabled.• Whentheon-timeandtheoff-timesetforthesametime,theoff-timesettingwilltakepreference.• Twodifferentsourcesaresetforthesametime,thelargerprogramnumberwilltakepreference.• Theon-timesettingwillnotbeexecutedwhilethecoolingfansarerunningoranerrorisoccurring.• Iftheoff-timesettingisexpiredundertheconditioninwhichthepoweroffisnotpossible,theoff-timersettingwillnotbeexecuted

until the power off becomes possible.• Programsnotmarkedwithacheckmarkin[ACTIVE]ofthe[EDIT]screenwillnotbeexecutedeveniftheProgramTimeris

enabled.• Whentheprojectoristurnedonbyusingtheprogramtimerandifyouwanttoturnofftheprojector,settheoff-timeordoit

manually so as not to leave the projector on for a long period of time.

102


Activating the program timer

1. Select[ENABLE]onthe[PROGRAMTIMER]screenandpresstheENTERbutton.

Theselectionscreenwillbedisplayed.

2. Press the ▼buttontoalignthecursorwith[ON]andthenpresstheENTERbutton.

Returntothe[PROGRAMTIMER]screen.

NOTE:• Whentheeffectivesettingsofthe[PROGRAMTIMER]havenotbeensetto[ON],theprogramwillnotbeexecutedevenifthe

[ACTIVE]itemsintheprogramlisthavebeenticked.• Evenwhentheeffectivesettingsofthe[PROGRAMTIMER]aresetto[ON],the[PROGRAMTIMER]willnotworkuntilthe[PRO-

GRAMTIMER]screenisclosed.

Changing the programmed settings

1. Onthe[PROGRAMLIST]screen,selectaprogramyouwanttoeditandpresstheENTERbutton.

2. Changethesettingsonthe[EDIT]screen.

3. Select[OK]andpresstheENTERbutton.

Theprogrammedsettingswillbechanged.

Youwillbereturnedtothe[PROGRAMLIST]screen.

Changing the order of programs

1. Onthe[PROGRAMLIST]screen,selectaprogramwhoseorderyouwanttochangeandpressthe▶ but-ton.

2. Press the ▼ button to select ▲ or ▼.

3. Press the ENTER button a few times to select a row to which you wish to move the program.

Theorderoftheprogramswillbechanged.

Deleting the programs

1. Onthe[PROGRAMLIST]screen,selectaprogramnumberyouwanttodeleteandpressthe▶ button.

2. Press the ▼buttontoselect[DELETE].


Theconfirmationscreenwillbedisplayed.

4. Select[YES]andpresstheENTERbutton.

Theprogramwillbedeleted.

Thiswillcompletedeletingtheprogram.

103



Youcansetthecurrenttime,month,date,andyear.NOTE:Theprojectorhasabuilt-inclock.Theclockwillkeepworkingforabout2weeksafterthemainpoweristurnedoff.Ifthemainpowerisofffor2weeksormore,thebuilt-inclockwillcease.Ifthebuilt-inclockceases,setthedateandtimeagain.Thebuilt-in clock will not cease while in the standby mode.

TIME ZONE SETTINGS �� Select your time zone�DATE AND TIME SETTINGS �� Set your current date (MM/DD/YYYY) and time (HH:MM)� INTERNET TIME SERVER �� If you place a check mark, the projector’s built-in clock will be synchronized with an Internet

time server in every 24 hours and at the time of projector’s startup�UPDATE �� Synchronizes the projector’s built-in clock immediately� The UPDATE button is not available

unless the INTERNET TIME SERVER check box is turned on�SUMMER TIME SETTINGS �� If you place a check mark, the clock for daylight saving will be enabled�

[MOUSE]Thisfunctioncannotbeusedinthisdevice.Itisusedforfutureexpansionpurposesonly.

104


DisablingtheCabinetButtons[CONTROLPANELLOCK]ThisoptionturnsonorofftheCONTROLPANELLOCKfunction.

NOTE:• Howtocancelthe[CONTROLPANELLOCK] Whenthe[CONTROLPANELLOCK]issetto[ON],presstheEXITbuttonortheINPUTbuttononthemainbodyforabout10

secondstocancelthe[CONTROLPANELLOCK]setting.

TIP: • Whenthe[CONTROLPANELLOCK]isturnedon,akeylockicon[ ]willbedisplayedatthebottomrightofthemenu.• ThisCONTROLPANELLOCKdoesnotaffecttheremotecontrolfunctions.

EnablingSecurity[SECURITY]ThisfeatureturnsonorofftheSECURITYfunction.Unlessthecorrectkeywordisentered,theprojectorcannotprojectanimage.(→page36)


Selecting Communication Speed [COMMUNICATION SPEED]ThisfeaturesetsthebaudrateofthePCControlport(D-Sub9P).Itsupportsdataratesfrom4800to115200bps.Thedefaultis38400bps.Selecttheappropriatebaudrateforyourequipmenttobeconnected(dependingontheequipment,alowerbaudratemayberecommendedforlongcableruns).

NOTE:• Select[38400bps]orlesswhenusingthesuppliedsoftwareprograms.• Yourselectedcommunicationspeedwillnotbeaffectedevenwhen[RESET]isdonefromthemenu.

105


Setting ID to the Projector [CONTROL ID]YoucanoperatemultipleprojectorsseparatelyandindependentlywiththesingleremotecontrolthathastheCONTROLIDfunction.IfyouassignthesameIDtoalltheprojectors,youcanconvenientlyoperatealltheprojectorstogetherusingthesingleremotecontrol.Todoso,youhavetoassignanIDnumbertoeachprojector.

CONTROL ID NUMBER ��Select a number from 1 to 254 you wish to assign to your projector�CONTROL ID ��Select [OFF] to turn off the CONTROL ID setting and select [ON] to turn on the CONTROL ID set-

ting�

NOTE: • When[ON]isselectedfor[CONTROLID],theprojectorcannotbeoperatedbyusingtheremotecontrolthatdoesnotsupport

theCONTROLIDfunction.(Inthiscasethebuttonsontheprojectorcabinetcanbeused.)• Yoursettingwillnotbeaffectedevenwhen[RESET]isdonefromthemenu.•PressingandholdingtheENTERbuttonontheprojectorcabinetfor10secondswilldisplaythemenuforcancelingtheControl

ID.

Assigning or Changing the Control ID1. Turn on the projector.

2. Press the ID SET button on the remote control.

TheCONTROLIDscreenwillbedisplayed.

IftheprojectorcanbeoperatedwiththecurrentremotecontrolID,the[AC-TIVE]willbedisplayed.IftheprojectorcannotbeoperatedwiththecurrentremotecontrolID,the[INACTIVE]willbedisplayed.Tooperatetheinactiveprojector,assignthecontrolIDusedfortheprojectorbyusingthefollowingprocedure(Step3).

3. Press one of numeric keypad buttons while pressing and holding the ID SET button on the remote control.

Example:

Toassign“3”,pressthe“3”buttonontheremotecontrol.

NoIDmeansthatalltheprojectorscanbeoperatedtogetherwithasingleremotecontrol.Toset“NoID”,enter“000”orpresstheCLEARbutton.

TIP:TherangeofIDsisfrom1to254.4. Release the ID SET button.

TheupdatedCONTROLIDscreenwillbedisplayed.

NOTE: •TheIDscanbeclearedinafewdaysafterthebatteriesarerundownorremoved.•Accidentallypressinganyoneofthebuttonsoftheremotecontrolwillclearcurrently

specifiedIDwithbatteriesremoved.

106


Turning On or Off Remote Sensor [REMOTE SENSOR]Thisoptiondetermineswhichremotesensorontheprojectorisenabledinwirelessmode.Theoptionsare:FRONT/BACK,FRONT,BACK,andHDBaseT.

NOTE:• TheremotecontroloftheprojectorwillnotbeabletoreceivesignalsifthepowersupplyoftheHDBaseTtransmissiondevice

connectedtotheprojectorisswitchedonwhenthishasbeensetto“HDBaseT”.

TIP:• Iftheremotecontrolsystemdoesnotfunctionwhendirectsunlightorstrongilluminationstrikestheremotecontrolsensorof

the projector, change another option.

EnablingKeySoundandErrorSound[BEEP]This feature turnsonoroff thebuttonsoundoralarmwhenanerroroccursor the followingoperationsareper-formed.

• Displayingthemainmenu

• Switchingsources

• Resettingdatabyusing[RESET]

• PressingPOWERONorSTANDBYbutton

107


[NETWORK SETTINGS]

Important:• Consultwithyournetworkadministratoraboutthesesettings.• WhenusingawiredLANconnection,connectaLANcable(Ethernetcable)totheLANport(RJ-45)oftheprojector.(→ page

137)

TIP:Thenetworksettingsyoumakewillnotbeaffectedevenwhen[RESET]isdonefromthemenu.

Hints on How to Set Up LAN Connection

To set up the projector for a LAN connection:Select[WIREDLAN]→[PROFILES]→[PROFILE1]or[PROFILE2].TwosettingscanbesetforwiredLAN.Nextturnonorofffor[DHCP],[IPADDRESS],[SUBNETMASK],and[GATEWAY]andselect[OK]andpresstheENTERbutton.(→page108)TorecallLANsettingsstoredintheprofilenumber:Select[PROFILE1]or[PROFILE2]forwiredLAN,andthenselect[OK]andpresstheENTERbutton.(→page108)To connect a DHCP server:Turnon[DHCP]forwiredLAN.Select[ON]andpresstheENTERbutton.TospecifyIPaddresswithoutusingtheDHCPserver,turnoff[DHCP].(→page108)

To receive lamp replacement time or error messages via e-mail:Select[ALERTMAIL],andset[SENDER'SADDRESS],[SMTPSERVERNAME],and[RECIPIENT'SADDRESS].Last,select[OK]andpresstheENTERbutton.(→page110)

108


WIRED LAN

PROFILES • Thesettings forusing thebuilt-inEthernet/HDBaseTport intheprojectorcanberecordedintheprojectormemoryintwoways.• Select[PROFILE1]or[PROFILE2]andthendosettingsfor[DHCP]andtheotheroptions. Afterdoingthis,select[OK]andpresstheENTERbutton.Thiswillstoreyoursettingsinmemory.• Torecallthesettingsfrommemory: Afterselecting[PROFILE1]or[PROFILE2]fromthe[PRO-FILES]list. Select[OK]andpresstheENTERbutton.• Select[DISABLE]whennotconnectingtoawiredLAN

—

DHCP PlaceacheckmarktoautomaticallyassignanIPaddresstotheprojectorfromyourDHCPserver.ClearthischeckboxtoregistertheIPaddressorsubnetmasknumberobtainedfromyournetworkadministrator.

—

IPADDRESS SetyourIPaddressofthenetworkconnectedtotheprojectorwhen[DHCP]isturnedoff.

Upto12numericcharacters

SUBNETMASK Setyoursubnetmasknumberofthenetworkconnectedtotheprojectorwhen[DHCP]isturnedoff.


GATEWAY Setthedefaultgatewayofthenetworkconnectedtotheprojectorwhen[DHCP]isturnedoff.


AUTODNS PlaceacheckmarktoautomaticallyassigntheIPaddressofyourDNSserverconnectedtotheprojectorfromyourDHCPserver.ClearthischeckboxtosettheIPaddressofyourDNSserverconnectedtotheprojector.


DNSCONFIGURA-TION

SettheIPaddressofyourDNSserveronthenetworkconnectedtotheprojectorwhen[AUTODNS]iscleared.


RECONNECT Retrytoconnecttheprojectortoanetwork.Trythisifyouhavechanged[PROFILES].

—

109


PROJECTOR NAME

PROJECTORNAME Setauniqueprojectorname. Upto16alphanu-mericcharactersandsymbols

DOMAINSetahostnameanddomainnameoftheprojector.

HOSTNAME Setahostnameoftheprojector. Upto15alphanumericcharacters

DOMAINNAME Setadomainnameoftheprojector. Upto60alphanumericcharacters

110


ALERT MAIL

ALERTMAIL Thisoptionwillnotifyyourcomputeroflampreplacetimeorerrormessagesviae-mailwhenusingwirelessorwiredLAN.

Placing a checkmark will turn on the Alert Mail feature�Clearing a checkmark will turn off the Alert Mail feature�

Sample of a message to be sent from the projector:

Thelampandfiltersareat theendof itsusable life.Pleasereplacethelampandfilters.ProjectorName:NECProjectorLampHoursUsed:100[H]

—

HOSTNAME Typeinahostname. Upto15alphanumericcharacters

DOMAINNAME Typeinadomainnameofthenetworkconnectedtotheprojec-tor.

Upto60alphanumericcharacters

SENDER'SAD-DRESS

Specifythesender’saddress. Upto60alphanu-mericcharactersandsymbols

SMTPSERVERNAME

TypeintheSMTPservernametobeconnectedtotheprojec-tor.


RECIPIENT'SAD-DRESS1,2,3

Typeinyourrecipient’saddress. Upto60alphanu-mericcharactersandsymbols

TESTMAIL Sendatestmailtocheckifyoursettingsarecorrect.NOTE:• Ifyouenteredanincorrectaddressinatest,youmaynotreceivean

Alert mail. Should this happen, check if the Recipient’s Address iscorrectly set.

• Unless any one of the [SENDER'S ADDRESS], [SMTP SERVER'SNAME]or[RECIPIENT'SADDRESS1-3]isselected,[TESTMAIL]isnot available.

• Besuretohighlight[OK]andpresstheENTERbuttonbeforeexecuting[TESTMAIL].

—

111


NETWORKSERVICE

HTTPSERVER SetapasswordforyourHTTPserver. Upto10alphanumericcharacters

PJLink This option allows you to set a passwordwhen you use thePJLinkfeature.NOTE: • Donotforgetyourpassword.However,ifyouforgetyourpassword,

consult with your dealer. • WhatisPJLink? PJLinkisastandardizationofprotocolusedforcontrollingprojectors

of different manufacturers. This standard protocol is established by JapanBusinessMachineandInformationSystemIndustriesAssocia-tion(JBMIA)in2005.

TheprojectorsupportsallthecommandsofPJLinkClass1.• SettingofPJLinkwillnotbeaffectedevenwhen[RESET]isdonefrom

the menu.


AMXBEACON Turnonoroff fordetection fromAMXDeviceDiscoverywhenconnectingtothenetworksupportedbyAMX’sNetLinxcontrolsystem.

TIP: WhenusingadevicethatsupportsAMXDeviceDiscovery,allAMXNetLinxcontrol system will recognize the device and download the appropriate DeviceDiscoveryModulefromanAMXserver.

Placing a checkmark will enable detecting the projector from AMX Device Discovery�Clearing a checkmark will disable detecting the projector from AMX Device Discovery�

—

112


[SOURCE OPTIONS]

Setting Auto Adjust [AUTO ADJUST]ThisfeaturesetstheAutoAdjustmodesothatthecomputersignalcanbeautomaticallyormanuallyadjustedfornoiseandstability.Youcanautomaticallymakeadjustmentintwoways:[NORMAL]and[FINE].

OFF �� The computer signal will not be automatically adjusted� You can manually optimize the computer signal�NORMAL �� Default setting� The computer signal will be automatically adjusted� Normally select this option�FINE �� Select this option if fine adjustment is needed� It takes more time to switch to the source than when [NOR-

MAL]is selected�

TIP:• Thedefaultsettingwhenshippedfromthefactoryis[NORMAL].• WhentheAUTOADJ.buttonispressed,thesame[FINE]adjustmentiscarriedout.

[COLOR SYSTEM]ThisfeatureallowsyoutoselecttheTVvideosignal,whichdiffersfromcountrytocountry(NTSC,PAL,etc.).Thisissetto[AUTO]byfactorydefault.Setthisiftheprojectorcannotidentifythesignalautomatically.

[AUDIO SELECT]ThisselectstheaudioinputoftheHDMI1INterminal,HDMI2INterminal,DisplayPortinputterminalandEthernet/HDBaseTport.Wheninputtinganalogaudio,connecttheaudiooutputterminaloftheconnectingdevicewiththeBNCaudioinputterminalandsettheAudioSelectto“BNC”.

Selecting Default Source [DEFAULT INPUT SELECT]Youcansettheprojectortodefaulttoanyoneofitsinputseachtimetheprojectoristurnedon.

LAST �� Sets the projector to default to the previous or last active input each time the projector is turned on�AUTO �� Searches for an active source in order of HDMI1 → HDMI2 → DisplayPort → BNC → BNC(CV) → BNC(Y/C)

→ COMPUTER → HDBaseT and displays the first found source�HDMI1 �� Displays the digital source from the HDMI 1 IN connector every time the projector is turned on� HDMI2 �� Displays the digital source from the HDMI 2 IN connector every time the projector is turned on� DisplayPort �� Displays the digital source from the DisplayPort every time the projector is turned on� BNC �� Project the input signal from the BNC video input terminalBNC(CV) �� Project the input signal from the BNC(CV) video input terminal�BNC(Y/C) �� Project the input signal from the BNC(Y/C) video input terminal�COMPUTER �� Displays the computer signal from the COMPUTER IN connector every time the projector is turned on�HDBaseT �� Project the HDBaseT signal�

113


[SEAMLESS SWITCHING]Whentheinputconnectorisswitched,theimagedisplayedbeforeswitchingisheldtoswitchtothenewimagewithoutabreakduetoabsenceofasignal.

Setting Closed Caption [CLOSED CAPTION]ThisoptionsetsseveralclosedcaptionmodesthatallowtexttobesuperimposedontheprojectedimageofVideoorS-Video.Thesubtitlesandtextwillbedisplayedashortwhileaftertheon-screenmenudisappears.

OFF �� This exits the closed caption mode�CAPTION 1-4 �� Text is superimposed�TEXT 1-4 �� Text is displayed�

SelectingaColororLogoforBackground[BACKGROUND]Use this feature to display a blue/black screen or logowhen no signal is available.The default background is[BLUE].

NOTE: • Evenwhenthebackgroundlogoisselected,iftwopicturesaredisplayedin[PIP/PICTUREBYPICTURE]mode,thebluebackground

is displayed without the logo when there is no signal.

114


[POWER OPTIONS]

Selecting Power-saving in [STANDBY MODE]Settingthepowerconsumptioninthestandbymode.

NORMAL �� In the standby mode, the power consumption of the projector is 0�11 W (100-130 V)/0�16 W (200-240 V)�In the standby mode, the POWER indicator lights up in red while the STATUS indicator will go off�• Whensetto[NORMAL],thefollowingterminalsandfunctionswillbedisabled.HDMIoutputterminals,

audio output terminals, Ethernet/HDBaseT port, USB-A port, LAN function, mail notification functionHDBaseT STANDBY �� Compared to [NORMAL], the power consumption in the standby mode is higher but power can be supplied

to the projector using a wired LAN�In the standby mode, the power indicator will light up in orange while the status indicator will be turned off�

Important:• When[HDBaseTSTANDBY]isselected,[AUTOPOWEROFF]willturngreyincolorandbedisabledand[0:15]willbeselected

automatically.• Inthefollowingconditions,the[STANDBYMODE]settingwillbedisabledandtheprojectorwillgointothesleepmode.

* Sleepmodereferstothemodewherebythefunctionalrestrictionsduetothe[STANDBYMODE]settingareremoved.• When[ENABLE]isselectedunder[NETWORKSERVICE]→[AMXBEACON]• When[HDBaseT]isselectedunder[CONTROL]→[REMOTESENSOR]• WhenasignalisbeingreceivedfromaHDBaseTtransmissiondevice

• When[NORMAL]isselected,the[AUTOPOWERONSELECT]displayturnsgreyincolorandisdisabled,and[OFF]isautomati-cally selected.

NOTE:• WhenconnectingtoaHDBaseTtransmissiondevicesoldcommercially,ifthetransmissiondeviceissettotransmitremotecontrol

signals, the power consumption of the projector in the standby mode will increase.

TIP: • Yoursettingwillnotbeaffectedevenwhen[RESET]isdonefromthemenu.• ThepowerconsumptioninthestandbymodewillnotbeincludedincalculatingCO2 emission reduction.

Enabling Direct Power On [DIRECT POWER ON]Turnstheprojectoronautomaticallywhenthepowercordisinsertedintoanactivepoweroutlet.ThiseliminatestheneedtoalwaysusethePOWERbuttonontheremotecontrolorprojectorcabinet.

115


TurningOntheProjectorByApplyingComputerSignal[AUTOPOWERONSELECT]Thissettingautomaticallyprojectsanycomputersignalthatisinputwhentheprojectorisinthestandbymode.Connecttotheinputterminalontheprojectorusingacableandputtheprojectorinthestandbymode.Whenusingthe[AUTOPOWERONSELECT],setthe[STANDBYMODE]to[HDBaseTSTANDBY],turnonthepowersupplyofthetransmissiondeviceandkeepitinaconnectedstate.

OFF �� AUTO POWER ON SELECT function will be switch off�HDMI1, HDMI2, DisplayPort, COMPUTER, HDBaseT �� When a computer signal of a selected input terminal is detected, the power supply of the projector will be

turned on automatically and the computer screen will be projected�

NOTE: • ThisfunctionwillnotworkforcomputersignalssuchasSynconGreenorCompositeSyncandwhencomponentsignalsare

inputtothecomputerorBNCvideoinputterminal.• IfyouwanttotesttheAUTOPOWERONSELECTafterswitchingoffthepowersupplyoftheprojector,waitforthreeormore

secondsfirstafterswitchingoffthepowerbeforeinputtinganycomputersignal.Whenthepowersupplyisswitchedoffandtheprojector goes into the standby mode, the projector will continue to remain in the standby mode without power supply being restored if a computer signal continues to be input to the projector.

Enabling Power Management [AUTO POWER OFF]Whenthisoptionisselectedyoucanenabletheprojectortoautomaticallyturnoff(attheselectedtime:0:05,0:10,0:15,0:20,0:30,1:00)ifthereisnosignalreceivedbyanyinputorifnooperationisperformed.

NOTE:• ThepowerwillnotgooffautomaticallywhenasignalfromtheEthernet/HDBaseTportisbeingprojected.• [AUTOPOWEROFF]appearsingreywhenthe[STANDBYMODE]issetto[HDBaseTSTANDBY]and[0:15]willbesetautomati-

cally.

Using Off Timer [OFF TIMER]1. Select your desired time between 30 minutes and 16 hours: OFF, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00.

2. Press the ENTER button on the remote control.

3. The remaining time starts counting down.

4. The projector will turn off after the countdown is complete.

NOTE:• Tocancelthepresettime,set[OFF]forthepresettimeorturnoffthepower.• Whentheremainingtimereaches3minutesbeforetheprojectoristurnedoff,the[THEPROJECTORWILLTURNOFFWITHIN3

MINUTES]messagewillbedisplayedonthebottomofthescreen.

116


Returning to Factory Default [RESET]TheRESETfeatureallowsyoutochangeadjustmentsandsettingstothefactorypresetfora(all)source(s)exceptthefollowing:

[CURRENT SIGNAL]Resetstheadjustmentsforthecurrentsignaltothefactorypresetlevels.Theitemsthatcanberesetare:[PRESET],[CONTRAST],[BRIGHTNESS],[COLOR],[HUE],[SHARPNESS],[AS-PECTRATIO],[HORIZONTAL],[VERTICAL],[CLOCK],[PHASE],and[OVERSCAN].

[ALL DATA]Resetalltheadjustmentsandsettingsforallthesignalstothefactorypreset.AllitemscanberesetEXCEPT[LANGUAGE],[BACKGROUND],[FILTERMESSAGE],[EDGEBLENDING],[MULTISCREEN],[SCREENTYPE],[GEOMETRICCORRECTION],[REF.WHITEBALANCE],[STATICCONVERGENCE],[ADMINISTRATORMODE], [CONTROLPANELLOCK], [SECURITY], [COMMUNICATIONSPEED], [CONTROLID],[STANDBYMODE],[FANMODE],[LAMPLIFEREMAINING],[LAMPHOURSUSED],[FILTERHOURSUSED],[TOTALCARBONSAVINGS],and[WIREDLAN].Toresetthelampusagetime,see“ClearingLampHourMeter[CLEARLAMPHOURS]”below.

[ALLDATA(INCLUDINGENTRYLIST)]Resetalltheadjustmentsandsettingsforallthesignalstothefactorypresetexcept[LANGUAGE],[BACKGROUND],[FILTERMESSAGE],[EDGEBLENDING],[MULTISCREEN],[SCREENTYPE],[GEOMETRICCORRECTION],[REF.WHITEBALANCE],[STATICCONVERGENCE],[ADMINISTRATORMODE],[CONTROLPANELLOCK],[SECURITY],[COMMUNICATIONSPEED],[CONTROLID],[STANDBYMODE],[FANMODE],[LAMPLIFEREMAINING],[LAMPHOURSUSED],[FILTERHOURSUSED],[TOTALCARBONSAVINGS],and[WIREDLAN].Alsodeletesallthesignalsinthe[ENTRYLIST]andreturnstothefactorypreset.

NOTE:LockedsignalsinEntryListcannotbereset.

Clearing Lamp Hour Meter [CLEAR LAMP HOURS]Resetsthelampclockbacktozero.Selectingthisoptiondisplayssubmenuforaconfirmation.Select[YES]andpresstheENTERbutton.

NOTE: • Elapsedtimeofthelampusewillnotbeaffectedevenwhen[RESET]isdonefromthemenu.• Performing[CLEARLAMPHOURS]willreturnthe[LAMPADJUST]in[LAMPMODE]toitsdefaultadjustments.Whentheprojec-

torisusedformulti-screenprojection,use[LAMPADJUST]toadjustthebrightnessagain.

117


Clearing the Filter Usage Hours [CLEAR FILTER HOURS]Resetsthefilterusagebacktozero.Selectingthisoptiondisplayssubmenuforaconfirmation.Select[YES]andpresstheENTERbutton.

The[OFF]itemisselectedfor[FILTERMESSAGE]atthetimeofshipment.When[OFF]isselected,youdonotneedtoclearthefilterusagehour.

NOTE:Elapsedtimeofthefilterusewillnotbeaffectedevenwhen[RESET]isdonefromthemenu.

118


❽ Menu Descriptions & Functions [INFO.]Displaysthestatusofthecurrentsignalandlampusage.Thisitemhasninepages.Theinformationincludedisasfollows:

TIP:PressingtheHELPbuttonontheremotecontrolwillshowthe[INFO.]menuitems.

[USAGE TIME]

[LAMPLIFEREMAINING](%)*[LAMPHOURSUSED](H)[FILTERHOURSUSED](H)[TOTALCARBONSAVINGS](kg-CO2)

* Theprogressindicatorshowsthepercentageofremainingbulblife.

Thevalueinformsyouoftheamountoflampusage.Whentheremaininglamptimereaches0,theLAMPLIFEREMAININGbarindicatorchangesfrom0%to100Hoursandstartscountingdown.

Iftheremaininglamptimereaches0hours,theprojectorwillnotturnon.

• ThemessagetotheeffectthatthelamporthefiltersshouldbereplacedwillbedisplayedforoneminutewhentheprojectoristurnedonandwhenthePOWERbuttonontheprojectorortheremotecontrolispressed.

Todismissthismessage,pressanybuttonontheprojectorortheremotecontrol.

Lamplife(H)

Replacement lampECO MODE During portrait

installationNORMAL

(OFF)ECO(ON)

3000 4000 2000 NP26LP

• [TOTALCARBONSAVINGS]

Thisdisplaystheestimatedcarbonsavinginformationinkg.Thecarbonfootprintfactorinthecarbonsavingcal-culationisbasedontheOECD(2008Edition).(→page30)

119


[SOURCE(1)]

INPUTTERMINAL RESOLUTIONHORIZONTALFREQUENCY VERTICALFREQUENCYSYNCTYPE SYNCPOLARITYSCANTYPE SOURCENAMEENTRYNO.

[SOURCE(2)]

SIGNALTYPE VIDEOTYPEBITDEPTH VIDEOLEVELLINKRATE LINKLANE

[WIRED LAN]

IPADDRESS SUBNETMASKGATEWAY MACADDRESS

120


[VERSION(1)]

FIRMWARE DATASUB-CPU

[OTHERS]

DATETIME PROJECTORNAMEMODELNO. SERIALNUMBERCONTROLID(when[CONTROLID]isset)

121


[CONDITIONS]

INTAKETEMPERATURE EXHAUSTTEMPERATUREINSTALLATIONPOSITION X-AXISY-AXIS Z-AXIS

AbouttheX-AXIS,Y-AXISandZ-AXISCONDITIONS* ArrowdirectionoftheZ-AXISinthefigurerepresentsthetopoftheprojector.

X-AXIS �� Display the projector image at an angle of −100 – +100 degrees to the horizontal in the X-axis direction�

X-AXISvalueof theprojector

HorizontalplaneX-axis

Gravitydirection

Y-AXIS �� Display the projector image at an angle of −100 – +100 degrees to the horizontal in the Y-axis direction�

Y-AXISvalueof theprojector

HorizontalplaneY-axis Gravitydirection

Z-AXIS �� Display the projector image at an angle of −100 – +100 degrees to the vertical in the Z-axis direction�

Z-AXISvalueof theprojector

HorizontalplaneZ-axis

Gravitydirection

122


[HDBaseT]

SIGNALQUALITY OPERATIONMODELINKSTATUS HDMISTATUS

123

❶ Mounting a lens (sold separately)Sixseparatebayonetstylelensescanbeusedwiththisprojector.ThedescriptionsherearefortheNP13ZL(2xzoom)lens.Mountotherlensesinthesamemanner.

NOTE:• Theprojectorandlensesaremadeofprecisionparts.Donotsubjectthemtoshockorexcessiveforces.• Removetheseparatelysoldlenswhenmovingtheprojector.Ifnot,thelenscouldbesubjecttoshockwhiletheprojectorisbeing

moved, damaging the lens and the lens shift mechanism.• Turnoffthepowerandwaitforthecoolingfantostopbeforemountingorremovingthelens.• Nevertouchthelenssurfacewhiletheprojectorisoperating.• Beverycarefulnottoletdirt,grease,etc.,onthelenssurfaceandnottoscratchthelenssurface.• Performtheseoperationsonaflatsurfaceoverapieceofcloth,etc.,topreventthelensfromgettingscratched.• Whenleavingthelensofftheprojectorforlongperiodsoftime,mountthedustcapontheprojectortopreventdustordirtfrom

getting inside.• Ifyouhavemultipleprojectors,becarefulofthefollowing:

- WhenmountingalensdesignedexclusivelyforthisprojectorontoanotherprojectorintheNPseries,besuretoremovethelensattachmentbeforemountingthelensontheprojector.Thelenscannotbemountedifitsattachmentison.Forthetypesoflensesthatcanbemountedandinstructionsonremovingthem,seethelense’soperatinginstructions.

- Other types of lenses cannot be mounted on this projector.

Mounting the lens1. Remove the dust cap from the projector.

2. Remove the lens cap on the back of the lens.

3. Insert the lens onto the projector with the yellow-marked protrusion on the lens facing upwards.

Thereisapositioningslitontheprojector’slensinsertionslot.Insertthelensslowlyallthewayin,keepingthepositioningslitatthesameangle.

Guidingnotch

Yellowmark

6. Connecting to Other Equipment

124

6. Installation and Connections

4. Turn the lens clockwise.

Turnuntilaclickisheard.

Thelensisnowfastenedontotheprojector.

TIP:MountingthelenstheftpreventionscrewFastenthelenstheftpreventionscrewincludedwiththeprojectortothebottom of the projector so that the lens cannot be removed easily.

Removing the lens

1. While pressing the lens release button on the projector’s front panel fully in, turn the lens counterclockwise.

Thelenscomesoff.

NOTE: • Checkthefollowingareasifthelensunitcannotberemovedeven

when the lens release button is pressed.1.Checkwhetherthetheftpreventionscrewsofthelensunithave

been installed.2.Thelensreleasebuttonmaybelockedsometimes.Inthatcase,

turn the lens fully to the right. The lens release button lock will be released.

2. Slowly pull the lens off the projector.

• Afterremovingthelens,mountthelenscaps(frontandback)includedwiththelensbeforestoringthelens.

• Ifnolensisgoingtobemountedontheprojector,mountthedustcapincludedwiththeprojector.

125


❷ Making ConnectionsAcomputercable,BNCcable(5-coretype),HDMIcable,oraDisplayPortcablecanbeusedtoconnecttoacom-puter.Theconnectioncableisnotenclosedwiththeprojector.Pleasegetreadyasuitablecablefortheconnection.

Analog RGB signal connection

• Connectthecomputercabletothedisplayoutputterminal(miniD-sub15pin)onthecomputerandthecomputervideoinputterminalontheprojector.Pleaseuseacomputercableattachedwithaferritecore.

• Whenconnectingthedisplayoutputterminal(miniD-sub15pin)onthecomputertotheBNCvideoinputterminal,useaconversioncabletoconverttheBNCcable(5core)toaminiD-sub15pincable.

• Selectthesourcenameforitsappropriateinputconnectorafterturningontheprojector.

InputconnectorINPUTbuttonontheprojector

cabinetButtonontheremotecontrol

COMPUTERIN 7:COMPUTER 7/COMPUTER

BNCIN 4:BNC 4/BNC

COMPUTER IN

BNC IN

AUDIO IN

AUDIO IN

Computercable(soldcommercially)

Stereomini-plugaudiocable(notsupplied)

RGB-to-BNCcable(notsupplied)

Stereomini-plugaudiocable(notsupplied)

NOTE: Please check the operating manual of the computer as the name, position and direc-tion of the terminal may differ depending on the computer.

126


Digital RGB signal connection

• ConnectacommerciallyavailableHDMIcablebetweenthecomputer’sHDMIoutputconnectorandtheprojector’sHDMI1orHDMI2inputconnector.

• ConnectacommerciallyavailableDisplayPortcablebetweenthecomputer’sDisplayPortoutputconnectorandtheprojector’sDisplayPortinputconnector.




HDMI1IN 1:HDMI1 1/HDMI1


DisplayPortIN 3:DisplayPort 3/DisplayPort

DisplayPort INHDMI 1 IN

HDMI 2 IN

HDMIcable(notsupplied)DisplayPortcable(notsupplied)

127


Cautions when connecting an HDMI cable• UseacertifiedHighSpeedHDMI®CableorHighSpeedHDMI®CablewithEthernet.

CautionswhenconnectingaDisplayPortcable• UseacertifiedDisplayPortcable.

• Dependingonthecomputer,sometimemayberequireduntiltheimageisdisplayed.

• SomeDisplayPortcables(commerciallyavailable)havelocks.

• Todisconnectthecable,pressthebuttononthetopofthecable’sconnector,thenpullthecableout.

• PowercanbesuppliedtotheconnectingdevicefromtheDisplayPortinputterminal(maximumof1.65W).How-ever,powerwillnotbesuppliedtothecomputer.

• WhensignalsfromadevicethatusesasignalconverteradapterareconnectedtotheDisplayPortinputconnector,insomecasestheimagemaynotbedisplayed.

• WhentheHDMIoutputofacomputerisconnectedtotheDisplayPortinputconnector,useaconverter(commer-ciallyavailable).

128


CautionswhenusingaDVIsignal• WhenthecomputerhasaDVIoutputconnector,useacommerciallyavailableconvertercabletoconnect thecomputertotheprojector’sHDMI1orHDMI2inputconnector(onlydigitalvideosignalscanbeinput).Also,con-nectthecomputer’saudiooutputtotheprojector’sBNCaudioinputconnector.Inthiscase,switchtheHDMI1orHDMI2settingaton-screenmenu’saudioselectionontheprojectorto[BNC].(→page112)

Toconnectthecomputer’sDVIoutputconnectortotheprojector’sDisplayPortinputconnector,useacommerciallyavailableconverter.

HDMI 1 INHDMI 2 IN

AUDIO IN

NOTE:WhenViewingaDVIDigitalSignal• Turnoffthepowerofthecomputerandprojectorbeforeconnecting.• Lowerthecomputer’svolumesettingbeforeconnectinganaudiocabletotheheadphonesconnector.Whenusingwithacomputer

connected to the projector, adjust the volume of both the projector and computer to set the appropriate volume level.• Ifthecomputerhasamini-jacktypeaudiooutputconnector,werecommendconnectingtheaudiocabletothatconnector.• Whenavideodeckisconnectedviaascanconverter,etc.,thedisplaymaynotbecorrectduringfast-forwardingandrewind-

ing.• UseaDVI-to-HDMIcablecompliantwithDDWG(DigitalDisplayWorkingGroup)DVI(DigitalVisualInterface)revision1.0stan-

dard.Thecableshouldbewithin197"/5mlong.• TurnofftheprojectorandthePCbeforeconnectingtheDVI-to-HDMIcable.• ToprojectaDVIdigitalsignal:Connectthecables,turntheprojectoron,thenselecttheHDMIinput.Finally,turnonyourPC. Failuretodosomaynotactivatethedigitaloutputofthegraphicscardresultinginnopicturebeingdisplayed.Shouldthishappen,

restartyourPC.• SomegraphicscardshavebothanalogRGB(15-pinD-Sub)andDVI(orDFP)outputs.Useofthe15-pinD-Subconnectormay

result in no picture being displayed from the digital output of the graphics card.• DonotdisconnecttheDVI-to-HDMIcablewhiletheprojector isrunning.If thesignalcablehasbeendisconnectedandthen

reconnected,animagemaynotbecorrectlydisplayed.Shouldthishappen,restartyourPC.• TheCOMPUTERvideoinputconnectorssupportWindowsPlugandPlay.TheBNCvideoinputconnectordoesnotsupportWin-

dows Plug and Play.• AMacsignaladapter(commerciallyavailable)mayberequiredtoconnectaMaccomputer. ToconnectaMaccomputerequippedwithaMiniDisplayPorttotheprojector,useacommerciallyavailableMiniDisplayPort→

DisplayPortconvertercable.

129


HDMI IN AUDIO IN

HDMI OUT

AUDIO OUT

Connecting an External Monitor

Youcanconnectaseparate,externalmonitortoyourprojectortosimultaneouslyviewonamonitorthecomputeranalogimageyou’reprojecting.• BNC(CV)componentvideosignalsandBNC(Y/C)S-videosignalswillnotbeoutput.• PleaserefertoPage85whendisplayingthePIP/PBPscreen.

NOTE:• WhenoutputtingHDMIsignals,turnonthepowerofthevideodeviceontheoutputsideandkeepitconnectedbeforeinputting

videosignalsintothisdevice.TheHDMIoutputterminalsoftheprojectorareequippedwithrepeaterfunctions.WhenadeviceisconnectedtotheHDMIoutputterminal,theresolutionoftheoutputsignalislimitedbytheresolutionsupportedbytheconnecteddevice.

• Whenthe[STANDBYMODE]ofthisdeviceissetto[NORMAL],HDMIsignalswillnotbeoutput.TooutputHDMIsignals,setthe[STANDBYMODE]to[HDBaseTSTANDBY],turnonthepowersupplyofthetransmissiondeviceandkeepitconnected.

• InthecaseoftheHDMIoutputterminaloftheprojector,thetheoreticalnumberofunitsthatcanbeconnectedinaseriesisseven.The maximum number of units that can be connected may be reduced by the external environment and quality of the signal and cable,etc.ThenumberofunitsthatcanbeconnectedmaydifferdependingontheHDCPversion,restrictiononthenumberofHDCPrepeatersinthesourcedeviceandthequalityofthecable.Theoverallsystemneedstobecheckedinadvancewhenbuild-ing a system.

• Whenaudioequipmentisconnected,theprojectorspeakerisdisabled.• Tooutputaudiofromtheaudiooutputterminalwhentheinputterminalisneither“COMPUTERIN”nor“BNCIN”,select[BNC]

under[AUDIOSELECT]oftheon-screenmenu.• Whenthe[STANDBYMODE]issetto[NORMAL],videoandaudiowillnotbeoutputiftheprojectorgoesintothestandbymode.

Setthemodeto[HDBaseTSTANDBY],turnonthepowerofthetransmissiondeviceandkeepitinaconnectedstate.

Computercable(VGA)(notsupplied)

Stereomini-plugaudiocable(notsupplied)HDMIcable(notsupplied)

130


Connecting Your Blu-ray Player or Other AV EquipmentComponentvideosignal/S-videosignalconnection




BNC(CV)IN 5:BNC(CV) 5/BNC(CV)

BNC(Y/C)IN 6:BNC(Y/C) 6/BNC(Y/C)

NOTE:• TheBNC(analogRGB/component),BNC(CV)andBNC(Y/C)audioinputterminalsareshared.

CV Y C

BNC(C) IN

AUDIO INBNC(CV) IN

BNC(Y) IN

Audiocable(notsupplied)BNCcable(notsupplied)

Audioequipment

Audiocable(notsupplied)

131


Connecting Component Input




COMPUTERIN 7:COMPUTER 7/COMPUTER

BNCIN 4:BNC 4/BNC

NOTE:• Whenthesignalformatissetto[AUTO](defaultfactorysettingwhenshipped),thecomputersignalandcomponentsignalare

automatically distinguished and switched. If the signals cannot bedistinguished, select [COMPONENT]under [ADJUST]→ [VIDEO]→[SIGNALTYPE]intheon-screenmenuoftheprojector.

• ToconnecttoavideodevicewithaDconnector,usethesoldseparatelyDconnectorconverteradapter(modelADP-DT1E).

AUDIO INCOMPUTER IN

AUDIO IN

15-pin-to-RCA(female)×3cableadapter(ADP-CV1E) BNC(male)-to-RCA(male)conversioncable×3

(soldcommercially)

Stereominiplug-to-RCAaudiocable(notsupplied)

ComponentvideoRCA×3cable(notsupplied)

Blu-rayplayer AudioEquipment

132


Connecting HDMI InputYoucanconnecttheHDMIoutputofyourBlu-rayplayer,harddiskplayer,ornotebooktypePCtotheHDMI1INorHDMI2INconnectorofyourprojector.





TIP:ForusersofaudiovideoequipmentwithanHDMIconnector:Select“Enhanced”ratherthan“Normal”ifHDMIoutputisswitchablebetween“Enhanced”and“Normal”.This will provide improved image contrast and more detailed dark areas.Formoreinformationonsettings,refertotheinstructionmanualoftheaudiovideoequipmenttobeconnected.

• WhenconnectingtheHDMI1INorHDMI2INconnectoroftheprojectortotheBlu-rayplayer,theprojector’svideolevelcanbemadesettingsinaccordancewiththeBlu-rayplayer’svideolevel.Inthemenuselect[ADJUST]→ [VIDEO]→[VIDEOLEVEL]andmakenecessarysettings.

• IftheHDMIinputsoundcannotbeheard,inthemenuselect[AUDIOSELECT]→[HDMI1]or[HDMI2].

• If theHDMI input’ssound isnotoutput,check that [SOURCEOPTIONS]→ [AUDIOSELECT]→ [HDMI1]or[HDMI2]ontheprojector’son-screenmenuissetto“HDMI”.(→page112)

HDMI 1 IN HDMI 2 IN

Audiocable(notsupplied)

HDMIcable(notsupplied)UseHighSpeedHDMI® Cable.

133


Connecting to a HDBaseT transmission device (sold commercially)HDBaseTisaconnectionstandardforhomeappliancesthatisestablishedbytheHDBaseTAlliance.UseaLANcablesoldcommerciallytoconnecttheEthernet/HDBaseTportoftheprojector(RJ-45)toaHDBaseTtransmissiondevicesoldcommercially.TheEthernet/HDBaseTportoftheprojectorsupportsHDMIsignals(HDCP)fromtransmissiondevices,controlsignalsfromexternaldevices(serial,LAN)andremotecontrolsignals(IRcommands).

Connection example

Ethernet/HDBaseT

Computer(forcontroluse)Computer(foroutputuse)

Exampleofatransmissiondevice

Ourcompany’sremotecontrol(PX750U/PH1000U/PH1400USeries)

HDMIoutputvideodevice

NOTE:• Pleaseuseashieldedtwistedpair(STP)cableofCategory5eorhigherfortheLANcable(soldcommercially).• ThemaximumtransmissiondistanceovertheLANcableis100m.(themaximumdistanceis70mfora4Ksignal)• Pleasedonotuseothertransmissionequipmentbetweentheprojectorandtransmissionequipment.Thepicturequalitymaybe

degraded as a result.• ThisprojectorisnotguaranteedtoworkwithallHDBaseTtransmissiondevicessoldcommercially.

134


Portrait projection (vertical orientation)Portraitscreensfromacomputercanbeprojectedbyinstallingtheprojec-torinaverticalorientation.Allthescreenssuchastheon-screenmenuwillberotatedinancounter-clockwisedirection.

Theprojectorisequippedwithasensortoautomaticallydetecttheinstal-lationstate.Whentheprojectorisinstalledinaportraitconfigurationforthefirsttimewiththelamplitup,acautionmessagetoindicatethattheoperatingtimeofthelampmaybeshortenedwillbedisplayed.Thismessagewillautomaticallydisappearwhentheinstallationstateoftheprojectorisreturnedtotheoriginalstate.

Precautions during installation• Pleasedonotinstalltheprojectorinaverticalorientationontopofthefloorortableonitsown.Theairinletmaybeobstructed,resultingintheprojectorgettingwarmandthepossibilityoffireandmalfunctionoccurring.

• Forverticalinstallation,installtheprojectorwiththeairinlet(filter)facingdownwards.Astandforsupportingtheprojectorneedstobemadeforthispurpose.Inthiscase,thestandmustbedesignedsuchthatthecenterofgravityoftheprojectorislocatedwellwithinthelegsofthestand.Ifnot,theprojectormayfalloverandresultininjury,damageandmalfunction.

• Donotusethelensshiftfunctionwhenperformingportraitprojection.Usethepositionofthelensshiftmecha-nisminthecenter(lenscenter).

NOTE:• Thelampreplacementtime(asaguide)*isabout2000hoursforportraitprojection.

* Replacementtimeisnotguaranteed.• Wheninstallinginaportraitconfigurationforthefirsttime,portraitprojectioncannotbeusedwhenthenumberoflamphours

usedshownunder[INFO.]→[USAGETIME]→[LAMPHOURSUSED]intheon-screenmenuexceeds1900hours.• Whenthe[FANMODE]issettoamodeotherthan[AUTO],portraitprojectioncannotbeused.

Design and manufacturing conditions for the standPleaseengageaninstallationserviceproviderforthedesignandmanufactureofthecustomizedstandtobeusedforportraitprojection.Pleaseensurethatthefollowingarecompliedwithwhendesigningthestand.1. Maintainanopeningofatleast310×170mmsoasnottoobstructtheairinlet/filteroftheprojector.

2. Maintainadistanceofatleast130mmbetweentheprojectorairinletandthefloor(fortheopeningofthefiltercover).

3. Usethefourscrewholesatthebackoftheprojectortosecureittothestand.

Screwholecenterdimension:200×250mm

Screwholedimensionontheprojector:M4withamaximumdepthof8mm.

* Pleasedesignthestandsuchthattherearlegsatthebackoftheprojectordonotcontactthestand.Thefrontlegscanbeturnedandremoved.

4. Horizontaladjustmentmechanism(forexample,boltsandnutsinfourlocations)

5. Pleasedesignthestandsuchthatitdoesnottoppleovereasily.

135


Reference drawings* Thedrawingshowingthedimensionalrequirementsisnotanactualstanddesigndrawing.

[Side View] [Front View]

Screw holes for 4 - M4 use

Tilt foot (remove)

130 or greater

200

Filter cover (when opened)

Horizontal adjuster

[Bottom View]

Filter cover

310 or greater

Rear foot

Lens shift securing method

1. Pull the securing lever cover towards you to remove it.

• Thecovercannotbedetachedfromtheprojector.

2. Turn the screws to the left to loosen them.

• Screwscannotberemoved.

136


3. Slide the securing lever towards the top until it comes to a stop and then turn the screws to the right to tighten them.

• Tightenthescrewswhilepressingthesecuringlevertowardsthetop.

* Loosenthescrewsfirstbeforere-adjustingthelensshift.

4. Fix the four securing lever covers.

NOTE:• Determinethescreenpositionfirstbeforeusingthesecuringlevers.• Donotturnthezoomringwhenusingthesecuringlever.Pleasedonotremovethelenseither.• Thesecuringleverisusedtosupportthelensandnottosecurethelens.Asaresult,thescreenmayshiftwhenthelensis

touched.

137


Connecting to a Wired LANTheprojectorcomesstandardwithaEthernet/HDBaseTport(RJ-45)whichprovidesaLANconnectionusingaLANcable.TouseaLANconnection,youarerequiredtosettheLANontheprojectormenu.Select[SETUP]→[NETWORKSETTINGS]→[WIREDLAN].(→page107).

Example of LAN connectionExampleofwiredLANconnection

Server

Hub

LANcable(notsupplied)

NOTE: Use a Category 5 or higher LANcable.

138

7. MaintenanceThissectiondescribesthesimplemaintenanceproceduresyoushouldfollowtocleanthefilters,thelens,thecabinet,andtoreplacethelampandthefilters.

❶ Cleaning the FiltersTheair-filterspongekeepsdustanddirtfromgettinginsidetheprojectorandshouldbefrequentlycleaned.Ifthefilterisdirtyorclogged,yourprojectormayoverheat.

WARNING• Pleasedonotuseaspraycontainingflammablegastoremovedustattachedtothefilters,etc.Doingsomayresultinfires.

NOTE:Themessageforfiltercleaningwillbedisplayedforoneminuteaftertheprojectoristurnedonoroff.Whenthemessageisdisplayed,cleanthefilters.Thetimetocleanthefiltersissetto[OFF]attimeofshipment.(→ page 95)To cancel the message, press any button on the projector cabinet or the remote control.

The two-layerfilteron theprojector improvescoolinganddust-proofcapabilitiescomparedwith theconventionalmodels.Theoutsides(intakeside)ofthefirstandsecondlayerfiltersremovedust.Tocleanthefilter,detachthefilterunitandthefiltercover.

CAUTION• Beforecleaningthefilters,turnofftheprojector,disconnectthepowercordandthenallowthecabinettocool.Failuretodosocanresultinelectricshockorburninjuries.

1. Press down on the buttons on the left and right and then pull the filter cover towards you to open it.

Thecoverwillopenabout90degreesbeforeitstops.

Filtercover Button

When mounting the projector to a ceiling

Thefiltercoverwillopenabout90degreesbeforeitcomestoastopatthestopperposition.Removeyourhandsasthestopperwillbedetachedifitisopenedfurther.Thefiltercoverwillstopatapositionofabout90degrees.

However,thefiltercovermaycloseiftheprojectorvibrates.

139

7. Maintenance

2. Remove the filter unit by pulling out the tab.

Filterunit Tab

3. Remove the four filters.

Holdandremovethefiltersfittedtothetwosidesofthefilterunit.

4. Use a vacuum cleaner to vacuum all the dust inside.

Getridofdustinthefilter.

NOTE: • Wheneveryouvacuumthefilter,usethesoftbrushattachmentto

vacuum.Thisistoavoiddamagetothefilter.• Donotwashthefilterwithwater.Doingsocanresultinfilterclog-

ging.

5. Remove the dust on the front and back of the filter unit.

• Pleasealsoremovealldustfromthefiltercoverofthepro-jector.

140

7. Maintenance

6. Attach 4 new filters to both sides of the filter unit.

The installation locations of the filters are differentiated bywhetherthereareanyslits(notches).Installthefilterundertheflangearoundthefilterunitasfollows.

(1)Attachthe2filterswithtransparentframesfittedtothegripstothesideofthefilterunitwheretheknobislocated.

• Turnoverthesideofthefilterwiththetransparentboxandtheninstallit.

(2)Attachthe2filterswiththeblacklinestothesideofthefilterunitwherethereisnoknob.

• Turnover thesideof thefilterwith theblack line,andtheninserttheslitsintotheprotrusionsonthefilterunittoinstallit.

Flange

Knob

Slit

7. Mount the filter unit back onto the projector cabinet.

Insertthefilterunitontotheprojectorwiththesidesonwhichtheleftandrighthooksarelocatedontheoutside.

Hook

8. Closethefiltercover.

Afterclosing,pushthefiltercovernearthebuttonsuntila“click”soundisheard.Thefiltercoverwillbesecuredinposition.

Button

9. Clearthefilterusagehours.

Plugthepowercordintothewalloutlet,andthenturnontheprojector.

Fromthemenu,select[RESET]→[CLEARFILTERHOURS].(→page117)

Theintervaltimetocleanthefiltersissetto[OFF]attimeofshipment.Whenusingtheprojectorasitis,youdonotclearthefilterusage

141

7. Maintenance

❷ Cleaning the Lens• Turnofftheprojectorbeforecleaning.

• Theprojectorhasaplasticlens.Useacommerciallyavailableplasticlenscleaner.

• Donotscratchormarthelenssurfaceasaplasticlensiseasilyscratched.

• Neverusealcoholorglasslenscleanerasdoingsowillcausedamagetotheplasticlenssurface.

WARNING• Pleasedonotuseaspraycontainingflammablegastoremovedustattachedtothelens,etc.Doingsomayresultinfires.

❸ Cleaning the CabinetTurnofftheprojector,andunplugtheprojectorbeforecleaning.• Useadrysoftclothtowipedustoffthecabinet.

Ifheavilysoiled,useamilddetergent.

• Neverusestrongdetergentsorsolventssuchasalcoholorthinner.

• Whencleaningtheventilationslitsorthespeakerusingavacuumcleaner,donotforcethebrushofthevacuumcleanerintotheslitsofthecabinet.

Vacuumthedustofftheventilationslits.

• Cloggedventilationslitsmaycauseariseintheinternaltemperatureoftheprojector,resultinginmalfunction.

• Donotscratchorhitthecabinetwithyourfingersoranyhardobjects

• Contactyourdealerforcleaningtheinsideoftheprojector.

NOTE:Donotapplyvolatileagentsuchasinsecticideonthecabinet,thelens,orthescreen.Donotleavearubberorvinylproductinprolongedcontactwithit.Otherwisethesurfacefinishwillbedeterioratedorthecoatingmaybestrippedoff.

142

7. Maintenance

❹ Replacing the Lamp and the FiltersWhenthelampreachestheendofitslife,theLAMPindicatorinthecabinetwillblinkredandthemessage“THELAMPHASREACHEDTHEENDOFITSUSABLELIFE.PLEASEREPLACETHELAMPANDFILTER.USETHESPECIFIEDLAMPFORSAFETYANDPERFORMANCE.”willappear(*).Eventhoughthelampmaystillbeworking,replacethelamptomaintaintheoptimalprojectorperformance.Afterreplacingthelamp,besuretoclearthelamphourmeter.(→page116)

CAUTION• DONOTTOUCHTHELAMPimmediatelyafterithasbeenused.Itwillbeextremelyhot.Turntheprojectoroffandthendisconnectthepowercord.Allowatleastonehourforthelamptocoolbeforehandling.

• Usethespecifiedlampforsafetyandperformance.

• DONOTREMOVEANYSCREWSexceptonelampcoverscrewandtwolamphousingscrews.Youcouldreceiveanelectricshock.

• Donotbreaktheglassonthelamphousing.

Keepfingerprintsofftheglasssurfaceonthelamphousing.Leavingfingerprintsontheglasssurfacemightcauseanunwantedshadowandpoorpicturequality.

• Theprojectorwillturnoffandgointostandbymodewhenyoucontinuetousetheprojectorforanother100hoursafterthelamphasreachedtheendofitslife.Ifthishappens,besuretoreplacethelamp.Ifyoucontinuetousethelampafterthelampreachestheendofitslife,thelampbulbmayshatter,andpiecesofglassmaybescatteredinthelampcase.Donottouchthemasthepiecesofglassmaycauseinjury.Ifthishappens,contactyourNECdealerforlampreplacement.

*NOTE: This message will be displayed under the following conditions:• foroneminuteaftertheprojectorhasbeenpoweredon• whenthe (POWER)buttonontheprojectorcabinetortheSTANDBYbuttonontheremotecontrolispressed

To turn off the message, press any button on the projector cabinet or the remote control.

Optionallampandtoolsneededforreplacement:

• Phillipsscrewdriver(plus-head)

• Replacementlamp: NP26LP

Flow of Replacing the Lamp and the Filters

Step 1. Replace the lamp

Step 2. Replace the filters (→ page 145)

Step 3. Clearthelampusagehoursandthefilterusagehours(→ page 116, 117)

143

7. Maintenance

To replace the lamp: 1. Remove the lamp cover.

(1)Loosenthelampcoverscrew

• Thelampcoverscrewisnotremovable.

(2)Pullthebottomofthelampcovertowardsyouandremoveit.

2. Remove the lamp housing.

(1)Loosenthetwoscrewssecuringthelamphousinguntilthephillipsscrewdrivergoesintoafreewheelingcondi-tion.

• Thetwoscrewsarenotremovable.

• Thereisaninterlockonthiscasetopreventtheriskofelectricalshock.Donotattempttocircumventthisinterlock.

(2)Removethelamphousingbyholdingit.

CAUTION:Makesurethatthelamphousingiscoolenoughtobeforeremovingit.

Interlock Guidehole

144

7. Maintenance

3. Install a new lamp housing.

(1)Insertanewlamphousinguntilthelamphousingispluggedintothesocket.

(2)Positionsothattheguideholeinthebottomrightofthelamphouseisovertheprotrusionontheprojectorthenpressallthewayin.

(3)Secureitinplacewiththetwoscrews.

• Besuretotightenthescrews.

4. Reattach the lamp cover.

(1)Insertthetopedgeofthelampcoverintothegrooveintheprojectorandclosethelampcover.

(2)Tightenthescrewtosecurethelampcover.

• Besuretotightenthescrew.

This completes the lamp replacement.Goontothefilterreplacement.

NOTE: • Whenyoucontinuetousetheprojectorforanother100hoursafterthelamphasreachedtheendofitslife,theprojectorcannot

turnonandthemenuisnotdisplayed.Ifthishappens,presstheHELPbuttonontheremotecontrolfor10secondstoresetthelampclockbacktozero.Whenthelamptimeclockisresettozero,theLAMPindicatorgoesout.

• Forportraitprojection,thepowersupplywillbeswitchedoffwhenthelampreplacementtime(estimated)*isreached.Alampreplacement message will be displayed 100 hours before the lamp replacement time is reached.* The replacement time is not guaranteed.

145

7. Maintenance

Toreplacethefilters:Fourfiltersarepackagedwiththereplacementlamp.Honeycombfilter(coarsemesh):Largeandsmallsizes(attachedtotheoutsideofthefilterunit)Accordionfilter(finemesh):Largeandsmallsizes(attachedtotheinsideofthefilterunit)

NOTE: • Replaceallfourfiltersatthesametime.• Beforereplacingthefilters,wipeoffdustanddirtfromtheprojectorcabinet.• Theprojectorisprecisionequipment.Keepoutdustanddirtduringfilterreplacement.• Donotwashthefilterswithsoapandwater.Soapandwaterwilldamagethefiltermembrane.• Putfiltersintoplace.Incorrectattachmentofafiltermaycausedustanddirttogetintotheinsideoftheprojector.

Beforereplacingthefilters,replacethelamp.(→page143)

1. Press down on the buttons on the left and right and then pull the filter cover towards you to open it.

Thecoverwillopenabout90degreesbeforeitstops.

When mounting the projector to a ceiling

Thefiltercoverwillopenabout90degreesbeforeitcomestoastopatthestopperposition.Removeyourhandsasthestopperwillbedetachedifitisopenedfurther.Thefiltercoverwillstopatapositionofabout90degrees.

However,thefiltercovermaycloseiftheprojectorvibrates.

Filtercover Button

2. Remove the filter unit by pulling out the tab.

Filterunit Tab

146

7. Maintenance

3. Remove the four filters.

Holdontothefiltersfittedtobothsidesofthefilterunittoremovethefilterunit.

4. Remove dust from the filter unit and the filter cover.

Cleanbothoutsideandinside.

5. Attach 4 new filters to both sides of the filter unit.

Theinstallationlocationsofthefiltersaredifferentiatedbywhetherthereareanyslits(notches).Installthefilterundertheflangearoundthefilterunitasfollows.

(1)Attachthe2filterswithtransparentframesfittedtothegripstothesideofthefilterunitwheretheknobislo-cated.

• Turnoverthesideofthefilterwiththetransparentboxandtheninstallit.

(2)Attachthe2filterswiththeblacklinestothesideofthefilterunitwherethereisnoknob.

• Turnoverthesideofthefilterwiththeblackline,andtheninserttheslitsintotheprotrusionsonthefilterunittoinstallit.

6. Mount the filter unit back onto the projector cabinet.

Insertthefilterunitontotheprojectorwiththesidesonwhichtheleftandrighthooksarelocatedontheoutside.

7. Closethefiltercover.

Afterclosing,pushthefiltercovernearthebuttonsuntila“click”soundisheard.Thefiltercoverwillbesecuredinposition.

Thiscompletesthefilterreplacement.Goontotheclearinglampandfilterhourmeters.

Toclearthelampusagehoursandthefilterusagehours:1. Place the projector where you use it.

2. Plug the power cord into the wall outlet, and then turn on the projector.

3. Clearthelampusagehoursandthefilterusagehours.

1. Fromthemenu,select[RESET]→[CLEARLAMPHOURS]andresetthelampusagehours.

2. Select[CLEARFILTERHOURS]andresetthefilterusagehours.(→page117)

147

8. User Supportware❶ Operating Environment for Software Included on CD-ROMNames and Features of Bundled Software Programs

Nameofsoftwareprogram Features

VirtualRemoteTool(Windowsonly)

Whenthecomputerandprojectorareconnectedusinganetwork(wiredLAN),suchoperationsasturningtheprojector’spoweronandoffandswitchingthesignalcanbeperformed.Itisalsopossibletosendanimagetotheprojectorandregisteritasthebackgroundlogo.Oncetheimageisregistered,itcanbelockedtopreventthelogofrombeingoverwritten.

PCControlUtilityPro4PCControlUtilityPro5(forMacOS)

ThisisasoftwareprogramusedtooperatetheprojectorfromthecomputerwhenthecomputerandtheprojectorareconnectedwithLAN.(→page137)• PCControlUtilityPro4canbeusedwithaserialconnection.

* ThefollowingthreesoftwareontheCD-ROMcannotbeusedinthisdevice. ImageExpressUtilityLite(forWindows/MacOS),ImageExpressUtility2.0(forWindows)andDesktopControlUtility1.0(forWindows)

Download serviceFortheupdateinformationaboutthesesoftwareprograms,visitourwebsite:URL:http://www.nec-display.com/dl/en/index.html

Operating EnvironmentThefollowingistheoperatingenvironmentforImageExpressUtilityLite.Fortheoperatingenvironmentofothersoft-wareprogram,refertothehelpfunctionofeachsoftwareprogram.

[Windows]

SupportedOS Windows8(CoreEdition)Windows8ProWindows8EnterpriseWindows7HomeBasicWindows7HomePremiumWindows7ProfessionalWindows7UltimateWindows7EnterpriseWindowsVistaHomeBasicWindowsVistaHomePremiumWindowsVistaBusinessWindowsVistaUltimateWindowsVistaEnterpriseWindowsXPHomeEdition(32-bitversion)ServicePack3orlaterWindowsXPProfessional(32-bitversion)ServicePack3orlater• Windowspower-savingfunctionisnotsupported.• Tousetheaudiotransfercapability,Windows8/Windows7/WindowsVistaServicePack1orlaterisrequired.

[Mac]

SupportedOS MacOSXv10.6,v10.7,v10.8

http://www.nec-display.com/dl/en/index.html

148

8. User Supportware

❷ Installing Software Program

Installation for Windows software

ThesoftwareprogramsexceptPCControlUtilityPro5supportWindows8,Windows7,WindowsVista,andWindowsXP.

NOTE:• Toinstalloruninstalleachsoftwareprogram,theWindowsuseraccountmusthave“Administrator”privilege(Windows8,Win-

dows7,WindowsVista)or“ComputerAdministrator”privilege(WindowsXP).• Exitallrunningprogramsbeforeinstallation.Ifanotherprogramisrunning,theinstallationmaynotbecompleted.• TorunVirtualRemoteToolorPCControlUtilityPro4onWindows8,WindowsXPHomeEdition,andWindowsXPProfessional,

“Microsoft.NETFrameworkVersion2.0”isrequired.TheMicrosoft.NETFrameworkVersion2.0,3.0or3.5isavailablefromMicrosoft’swebpage.Downloadandinstallitonyourcomputer.

1 InserttheaccompanyingNECProjectorCD-ROMintoyourCD-ROMdrive.

Themenuwindowwillbedisplayed.

TIP:If the menu window will not be displayed, try the following procedure.ForWindows71. Click“start”onWindows.

2. Click“AllPrograms”→ “Accessories” → “Run”.

3. Type your CD-ROM drive name (example:“Q:\”) and“LAUNCHER.EXE” in“Name”. (example: Q:\LAUNCHER.EXE)

4. Click“OK”.


149

8. User Supportware

2 Clickasoftwareprogramyouwishtoinstallonthemenuwindow.

Theinstallationwillstart.

• Followtheinstructionsontheinstallerscreenstocompletetheinstallation.

TIP:

Uninstalling a Software ProgramPreparation:Exit thesoftwareprogrambeforeuninstalling.Touninstall thesoftwareprogram, theWindowsuseraccountmusthave“Administrator”privilege(Windows8,Windows7,andWindowsVista)or“ComputerAdministrator”privilege(WindowsXP).

•ForWindows8/Windows7/WindowsVista1 Click“Start”andthen“ControlPanel”.

TheControlPanelwindowwillbedisplayed.

2 Click“Uninstallaprogram”under“Programs”

The“ProgramsandFeatures”windowwillbedisplayed.

3 Select the software program and click it.

4 Click“Uninstall/Change”or“Uninstall”.

•Whenthe“UserAccountControl”windowsisdisplayed,click“Continue”.

Followtheinstructionsonthescreenstocompletetheuninstallation.

•ForWindowsXP1 Click“Start”andthen“ControlPanel”.

TheControlPanelwindowwillbedisplayed.

2 Double-click “Add / Remove Programs”.

TheAdd/RemoveProgramswindowwillbedisplayed.

3 Clickthesoftwareprogramfromthelistandthenclick“Remove”.

Followtheinstructionsonthescreenstocompletetheuninstallation.

150

8. User Supportware

Using on Mac OS

Step 1: Install PC Control Utility Pro 5 on the computer.

1. InserttheaccompanyingNECProjectorCD-ROMinyourMacCD-ROMdrive.

TheCD-ROMiconwillbedisplayedonthedesktop.

2. Double-clicktheCD-ROMicon.

TheCD-ROMwindowwillbedisplayed.

3. Double-click the “Mac OS X” folder.

4. Double-click“PCControlUtility.mpkg”.

Theinstallerwillstart.

5. Click“Next”.

“ENDUSERLICENSEAGREEMENT”screenwillbedisplayed.

6. Read“ENDUSERLICENSEAGREEMENT”andclick“Next”.

Theconfirmationwindowwillbedisplayed

7. Click“Iacceptthetermsinthelicenseagreement”.

Followtheinstructionsontheinstallerscreenstocompletetheinstallation.

TIP:

•Uninstallingasoftwareprogram1. Putthe“PCControlUtilityPro5”foldertotheTrashicon.

2. PuttheconfigurationfileofPCControlUtilityPro5totheTrashicon.

• TheconfigurationfileofPCControlUtilityPro5islocatedin“/Users/<yourusername>/ApplicationData/NECProjectorUserSupportware/PCControlUtilityPro5”.

151

8. User Supportware

❸ Operating the Projector Via the LAN (Virtual Remote Tool)Thiswillhelpyouperformoperationssuchasprojector’spoweronoroffandsignalselectionviaaLANconnection.Itisalsousedtosendanimagetotheprojectorandregisteritasthelogodataoftheprojector.Afterregisteringit,youcanlockthelogotopreventitfromchanging.

Control FunctionsPowerOn/Off,signalselection,picturefreeze,picturemute,audiomute,Logotransfertotheprojector,andremotecontroloperationonyourPC.

VirtualRemotescreen

RemoteControlWindow Toolbar

ThissectionprovidesanoutlineofpreparationforuseofVirtualRemoteTool.ForinformationonhowtouseVirtualRemoteTool,seeHelpofVirtualRemoteTool.(→page153)

NOTE:• Logodata(graphics)thatcanbesenttotheprojectorwithVirtualRemoteToolhasthefollowingrestrictions: (OnlyviaserialorLANconnection)

* Filesize:Within256kilobytes* Imagesize:Withintheresolutionoftheprojector* Fileformat:PNG(Fullcolor)

• Logodata(image)sentusingtheVirtualRemoteToolwillbedisplayedinthecenterwiththesurroundingareainblack.• Toputthedefault“NEClogo”backinthebackgroundlogo,youneedtoregisteritasthebackgroundlogobyusingtheimage

file (PA622U/NP-PA522U: \Logo\necpj_bbwux.png, PA672W/PA572W: \Logo\necpj_bbwx.png, PA722X/NP-PA622X: \Logo\necpj_bb_x.png)includedonthesuppliedNECProjectorCD-ROM.

152

8. User Supportware

Connect the projector to a LAN.ConnecttheprojectortotheLANbyfollowingtheinstructionsin“ConnectingtoaWiredLAN”(→page137)and“9.ControllingtheProjectorbyUsinganHTTPBrowser”(→page42)

Start Virtual Remote Tool

Start using the shortcut icon• Double-clicktheshortcuticon on the Windows Desktop.

Start from the Start menu• Click[Start]→[AllPrograms]or[Programs]→[NECProjectorUserSupportware]→[VirtualRemoteTool]

→[VirtualRemoteTool].

WhenVirtualRemoteToolstartsforthefirsttime,“EasySetup”windowwillbedisplayed.

Followtheinstructionsonthescreens

When“EasySetup”iscompleted,theVirtualRemoteToolscreenwillbedisplayed.

NOTE:• When[NORMAL]isselectedfor[STANDBYMODE]fromthemenu,theprojectorcannotbeturnedonvianetworkconnection.

TIP:• TheVirtualRemoteToolscreen(orToolbar)canbedisplayedwithoutdisplaying“EasySetup”window. Todoso,clicktoplaceacheckmarkfor“ DonotuseEasySetupnexttime”onthescreenatStep6in“EasySetup”.

153

8. User Supportware

ExitingVirtualRemoteTool1 ClicktheVirtualRemoteToolicon on the Taskbar.

Thepop-upmenuwillbedisplayed.

2 Click“Exit”.

TheVirtualRemoteToolwillbeclosed.

ViewingthehelpfileofVirtualRemoteTool•Displayingthehelpfileusingthetaskbar1 ClicktheVirtualRemoteToolicon onthetaskbarwhenVirtualRemoteToolisrunning.


2. Click“Help”.

TheHelpscreenwillbedisplayed.

•DisplayingthehelpfileusingtheStartMenu.1. Click“Start”.“Allprograms”or“Programs”.“NECProjectorUserSupportware”.“VirtualRemoteTool”.and

then“VirtualRemoteToolHelp”inthisorder.


154

8. User Supportware

❹ Controlling the Projector over a LAN (PC Control Utility Pro 4/Pro 5)Usingtheutilitysoftware“PCControlUtilityPro4”or“PCControlUtilityPro5”includedonthecompanionNECPro-jectorCD-ROM,theprojectorcanbecontrolledfromacomputeroveraLAN.PCControlUtilityPro4isaprogramcompatiblewithWindows.(→thispage)PCControlUtilityPro5isaprogramcompatiblewithMacOS.(→page157)

Control FunctionsPowerOn/Off,signalselection,picturefreeze,picturemute,audiomute,adjusting,errormessagenotification,eventschedule.

ScreenofPCControlUtilityPro4

ThissectionprovidesanoutlineofpreparationforuseofPCControlUtilityPro4/Pro5.ForinformationonhowtousePCControlUtilityPro4/Pro5,seeHelpofPCControlUtilityPro4/Pro5.(→page156,157)

Step1:InstallPCControlUtilityPro4/Pro5onthecomputer.Step2:ConnecttheprojectortoaLAN.Step3:StartPCControlUtilityPro4/Pro5.

• TorunPCControlUtilityPro4onWindows8,WindowsXPHomeEditionandWindowsXPProfessional,“Microsoft.NETFramework”isrequired.TheMicrosoft.NETFrameworkVersion2.0,3.0or3.5isavailablefromMicrosoft’swebpage.Downloadandinstalltheitonyourcomputer.

TIP:• PCControlUtilityPro4canbeusedwithaserialconnection.

Using on Windows

Step 1: Install PC Control Utility Pro 4 on the computer

NOTE:• Toinstalloruninstall theprogram,theWindowsuseraccountmusthave[Administrator]privilege(Windows8,Windows7,

WindowsVistaandWindowsXP)• Exitallrunningprogramsbeforeinstallation.Ifanotherprogramisrunning,theinstallationmaynotbecompleted.

1 InserttheaccompanyingNECProjectorCD-ROMintoyourCD-ROMdrive.


155

8. User Supportware

TIP:If the menu window will not be displayed, try the following procedure.ForWindows7:1. Click“start”onWindows.

2. Click“AllPrograms”→ “Accessories” → “Run”.

3. Type your CD-ROM drive name (example:“Q:\”) and“LAUNCHER.EXE” in“Name”. (example: Q:\LAUNCHER.EXE)

4. Click“OK”.

themenuwindowwillbedisplayed.

2 Click“PCControlUtilityPro4”onthemenuwindow.

Theinstallationwillstart.

Whentheinstallationiscomplete,theWelcomewindowwillbedisplayed.

3 Click“Next”.


Read“ENDUSERLICENSEAGREEMENT”carefully.

4 If you agree, click “I accept the terms in the license agreement” and then click “Next”.

• Followtheinstructionsontheinstallerscreenstocompletetheinstallation.

• Whentheinstallationiscomplete,youwillreturntothemenuwindow.

TIP:•UninstallingPCControlUtilityPro4TouninstallPCControlUtilityPro4,dothesameproceduresstatedasin“UninstallingaSoftwareProgram”.(→ page 149)

156

8. User Supportware

Step 2: Connect the projector to a LAN.ConnecttheprojectortotheLANbyfollowingtheinstructionsin“ConnectingtoaWiredLAN”(→page137)and“9.ControllingtheProjectorbyUsinganHTTPBrowser”(→page42)

Step 3: Start PC Control Utility Pro 4Click“Start”→“Allprograms”or“Programs”→“NECProjectorUserSupportware”→“PCControlUtilityPro4”→ “PCControlUtilityPro4”.

NOTE: • FortheSchedulefunctionofthePCControlutilityPro4towork,youmusthaveyourcomputerrunningandnotinstandby/

sleepmode.Select“PowerOptions”fromthe“ControlPanel”inWindowsanddisableitsstandby/sleepmodebeforerunningthescheduler.

[Example]ForWindows7:Select“ControlPanel”→“SystemandSecurity”→“PowerOptions”→“Changewhenthecomputersleeps”→“Putthecomputertosleep”→“Never”.NOTE: • When[NORMAL]isselectedfor[STANDBYMODE]fromthemenu,theprojectorcannotbeturnedonviathenetwork(wiredLAN)

connection.

TIP:

ViewingtheHelpofPCControlUtilityPro4• DisplayingtheHelpfileofPCControlUtilityPro4whileitisrunning.

Click“Help(H)”→“Help(H)…”ofwindowofPCControlUtilityPro4inthisorder.


• DisplayingthehelpfileusingtheStartMenu.

Click“Start”→“Allprograms”or“Programs”→“NECProjectorUserSupportware”→“PCControlUtilityPro4”→ “PCControlUtilityPro4Help”.


157

8. User Supportware

Using on Mac OS

Step 1: Install PC Control Utility Pro 5 on the computer1. InserttheaccompanyingNECProjectorCD-ROMinyourMacCD-ROMdrive.

TheCD-ROMiconwillbedisplayedonthedesktop.

2. Double-clicktheCD-ROMicon.

TheCD-ROMwindowwillbedisplayed.

3. Double-click the “Mac OS X” folder.

4. Double-click“PCControlUtility.mpkg”.

Theinstallerwillstart.

5. Click“Next”.


6. Read“ENDUSERLICENSEAGREEMENT”andclick“Next”.

Theconfirmationwindowwillbedisplayed

7. Click“Iacceptthetermsinthelicenseagreement”.

Followtheinstructionsontheinstallerscreenstocompletetheinstallation.

Step 2: Connect the projector to a LANConnecttheprojectortotheLANbyfollowingtheinstructionsin“ConnectingtoaWiredLAN”(→page137)and“❾ ControllingtheProjectorbyUsinganHTTPBrowser”(→page42)

Step 3: Start PC Control Utility Pro 51. Open your Applications folder in Mac OS.

2. Clickthe“PCControlUtilityPro5”folder.

3. Clickthe“PCControlUtilityPro5”icon.

PCControlUtilityPro5willstart.

NOTE: • FortheSchedulefunctionofthePCControlutilityPro5towork,youmusthaveyourcomputerrunningandnotinsleepmode.

Select“EnergySaver”fromthe“SystemPreferences”inMacanddisableitssleepmodebeforerunningthescheduler.• When[NORMAL]isselectedfor[STANDBYMODE]fromthemenu,theprojectorcannotbeturnedonviathenetwork(wiredLAN)

connection. TIP:

ViewingtheHelpofPCControlUtilityPro5•DisplayingtheHelpfileofPCControlUtilityPro5whileitisrunning.• Fromthemenubar,click“Help”→“Help”inthisorder.


•DisplayingtheHelpusingtheDock1. Open “Application Folder” in Mac OS.

2. Clickthe“PCControlUtilityPro5”folder.

3. Clickthe“PCControlUtilityPro5Help”icon.


158

9. Appendix

❶ Throw distance and screen sizeSixseparatebayonetstylelensescanbeusedonthisprojector.Refertotheinformationonthispageandusealenssuitedfortheinstallationenvironment(screensizeandthrowdistance).Forinstructionsonmountingthelens,seepage123.

Lens types and throw distancePA722X/PA622X

Screensize LensmodelnameNP11FL NP30ZL NP12ZL NP13ZL NP14ZL NP15ZL

30" 0.7-0.940" 0.6 0.9-1.2 1.2 - 2.460" 1.0 1.0-1.3 1.4-1.9 1.8-3.7 3.6-5.8 5.7 - 8.780" 1.3 1.3-1.7 1.9-2.5 2.4-4.9 4.8 - 7.8 7.6 - 11.6100" 1.6 1.6 - 2.1 2.4-3.2 3.0-6.1 6.0-9.7 9.6-14.6120" 2.0 2.0 - 2.6 2.9-3.8 3.7-7.4 7.3-11.7 11.5 - 17.6150" 2.5 2.5-3.2 3.7-4.8 4.6-9.2 9.1-14.7 14.4 - 22.0200" 3.3-4.3 4.9-6.4 6.1-12.3 12.2-19.6 19.3-29.4240" 4.0 - 5.2 5.9-7.7 7.4 - 14.8 14.7-23.6 23.2-35.3300" 5.0 - 6.5 7.4-9.6 9.2-18.5 18.4-29.5 29.1-44.2400" 6.7 - 7.7 9.8-12.8 12.3-24.7 24.6-39.4 38.8-59.0500" 8.4-10.9 12.3-16.0 15.4-30.8 30.7-49.2 48.6-73.8

TIPCalculationofthethrowdistancefromthescreensizeNP11FLlensthrowdistance(m)=H×0.8:0.6m(min.)to2.5m(max.)NP30ZLlensthrowdistance(m)=H×0.8toH×1.1:1.0m(min.)to10.9m(max.)NP12ZLlensthrowdistance(m)=H×1.2toH×1.6:0.7m(min.)to16.0m(max.)NP13ZLlensthrowdistance(m)=H×1.5toH×3.0:1.2m(min.)to30.8m(max.)NP14ZLlensthrowdistance(m)=H×3.0toH×4.8:3.6m(min.)to49.2m(max.)NP15ZLlensthrowdistance(m)=H×4.7toH×7.3:5.7m(min.)to73.8m(max.)“H”(Horizontal)referstothescreenwidth.*Figuresdifferbyseveral%withthetableabovebecausethecalculationisapproximate.Ex.:Throwdistancewhenprojectingona150"screenwiththePA722X/PA622XusingtheNP13ZLlens:Accordingtothe“ScreenSize(forreference)”table(→ page 161),H(screenwidth)=304.8cm.Thethrowdistanceis304.8cm×1.5to304.8cm×3.0=457.2cmto914.4cm(becauseofthezoomlens).

159

9. Appendix

PA672W/PA572W


30" 0.7 - 1.040" 0.7 1.0-1.3 1.2 - 2.560" 1.0 1.0-1.3 1.5 - 2.0 1.9-3.8 3.7-6.0 5.9-9.180" 1.4 1.4 - 1.8 2.0 - 2.6 2.5 - 5.1 5.0 - 8.1 7.9-12.1100" 1.7 1.7 - 2.2 2.5-3.3 3.2-6.4 6.3-10.1 9.9-15.2120" 2.1 2.0 - 2.7 3.0-4.0 3.9-7.7 7.6 - 12.2 12.0-18.3150" 2.6 2.6-3.4 3.8-5.0 4.8-9.6 9.5-15.3 15.0-22.9200" 3.4-4.5 5.1 - 6.6 6.4 - 12.8 12.7 - 20.4 20.1-30.6240" 4.1 - 5.4 6.1 - 8.0 7.7 - 15.4 15.3-24.5 24.1-36.8300" 5.2 - 6.8 7.7 - 10.0 9.6-19.2 19.1-30.7 30.2-46.0400" 6.9-9.0 10.2-13.3 12.8 - 25.7 25.5-40.9 40.4 - 61.4500" 8.7-11.3 12.8 - 16.7 16.0-32.1 31.9-51.2 50.5-76.9

TIPCalculationofthethrowdistancefromthescreensizeNP11FLlensthrowdistance(m)=H×0.8:0.7m(min.)to2.6m(max.)NP30ZLlensthrowdistance(m)=H×0.8toH×1.0:1.0m(min.)to11.3m(max.)NP12ZLlensthrowdistance(m)=H×1.2toH×1.5:0.7m(min.)to16.7m(max.)NP13ZLlensthrowdistance(m)=H×1.5toH×3.0:1.2m(min.)to32.1m(max.)NP14ZLlensthrowdistance(m)=H×2.9toH×4.7:3.7m(min.)to51.2m(max.)NP15ZLlensthrowdistance(m)=H×4.6toH×7.1:5.9m(min.)to76.9m(max.)“H”(Horizontal)referstothescreenwidth.*Figuresdifferbyseveral%withthetableabovebecausethecalculationisapproximate.Ex.:Throwdistancewhenprojectingona150"screenwiththePA672W/PA572WusingtheNP13ZLlens:Accordingtothe“ScreenSize(forreference)”table(→ page 161),H(screenwidth)=323.1cm.Thethrowdistanceis323.1cm×1.5to323.1cm×3.0=484.7cmto969.3cm(becauseofthezoomlens).

PA622U/PA522U


30" 0.7-0.940" 0.7 1.0-1.3 1.2 - 2.560" 1.0 1.0-1.3 1.5-1.9 1.9-3.8 3.7-6.0 5.9-9.080" 1.4 1.4 - 1.8 2.0 - 2.6 2.5 - 5.1 5.0 - 8.0 7.9-12.1100" 1.7 1.7 - 2.2 2.5-3.3 3.2-6.3 6.3-10.1 9.9-15.1120" 2.1 2.0 - 2.7 3.0-3.9 3.8-7.6 7.5 - 12.1 11.9-18.2150" 2.6 2.6-3.4 3.8-4.9 4.8-9.5 9.4-15.2 14.9-22.8200" 3.4-4.5 5.1 - 6.6 6.4 - 12.7 12.6-20.3 20.0-30.5240" 4.1 - 5.4 6.1-7.9 7.6-15.3 15.2 - 24.4 24.0-36.6300" 5.2 - 6.8 7.6-9.9 9.6-19.1 19.0-30.5 30.1-45.8400" 6.9-9.0 10.2-13.2 12.8 - 25.5 25.4 - 40.7 40.1 - 61.1500" 8.7-11.3 12.7 - 16.5 16.0-31.9 31.8-50.9 50.2 - 76.4

TIPCalculationofthethrowdistancefromthescreensizeNP11FLlensthrowdistance(m)=H×0.8:0.5m(min.)to2.6m(max.)NP30ZLlensthrowdistance(m)=H×0.8toH×1.0:1.0m(min.)to11.3m(max.)NP12ZLlensthrowdistance(m)=H×1.2toH×1.5:0.7m(min.)to16.5m(max.)NP13ZLlensthrowdistance(m)=H×1.5toH×3.0:1.2m(min.)to31.9m(max.)NP14ZLlensthrowdistance(m)=H×2.9toH×4.7:3.7m(min.)to50.9m(max.)NP15ZLlensthrowdistance(m)=H×4.6toH×7.1:5.9m(min.)to76.4m(max.)“H”(Horizontal)referstothescreenwidth.*Figuresdifferbyseveral%withthetableabovebecausethecalculationisapproximate.Ex.:Throwdistancewhenprojectingona150"screenwiththePA622U/PA522UusingtheNP13ZLlens:Accordingtothe“ScreenSize(forreference)”table(→ page 161),H(screenwidth)=323.1cm.Thethrowdistanceis323.1cm×1.5to323.1cm×3.0=484.7cmto969.3cm(becauseofthezoomlens).

160

9. Appendix

Projection range for the different lenses

40-150"

30-500"

40-500" 60-500"

60-500"

60-500"

NP12ZL

NP14ZL

NP11FL

NP30ZL

NP-PA622U/NP-PA522U: 0.7–2.6 mNP-PA672W/NP-PA572W: 0.7–2.6 mNP-PA722X/NP-PA622X: 0.6–2.5 m



NP13ZL NP-PA622U/NP-PA522U: 1.2–31.9 mNP-PA672W/NP-PA572W: 1.2–32.1 mNP-PA722X/NP-PA622X: 1.2–30.8 m


NP15ZL NP-PA622U/NP-PA522U: 5.9–76.4 mNP-PA672W/NP-PA572W: 5.9–76.9 mNP-PA722X/NP-PA622X: 5.7–73.8 m

161

9. Appendix

Tables of screen sizes and dimensions

PA722X/PA622X

PA622U/PA522U/PA672W/PA572W

Screenheight

Screenheight

Screenwidth

Screenwidth

4:3screensize(di-agonal)

16:10screensize(di-agonal)

Size(inches) Screenwidth Screenheight(inches) (cm) (inches) (cm)

30 24 61.0 18 45.740 32 81.3 24 61.060 48 121.9 36 91.480 64 162.6 48 121.9

100 80 203.2 60 152.4120 96 243.8 72 182.9150 120 304.8 90 228.6200 160 406.4 120 304.8240 192 487.7 144 365.8300 240 609.6 180 457.2400 320 812.8 240 609.6500 400 1016.0 300 762.0

Size(inches) Screenwidth Screenheight(inches) (cm) (inches) (cm)

30 25.4 64.6 15.9 40.440 33.9 86.2 21.2 53.860 50.9 129.2 31.8 80.880 67.8 172.3 42.4 107.7

100 84.8 215.4 53.0 134.6120 101.8 258.5 63.6 161.5150 127.2 323.1 79.5 201.9200 169.6 430.8 106.0 269.2240 203.5 516.9 127.2 323.1300 254.4 646.2 159.0 403.9400 339.2 861.6 212.0 538.5500 424.0 1077.0 265.0 673.1

162

9. Appendix

Lens shifting rangeThisprojectorisequippedwithalensshiftfunctionforadjustingthepositionoftheprojectedimagebyturningthelensshiftdials.Thelenscanbeshiftedwithintherangeshownbelow.

NOTE: • ThelensshiftfunctioncannotbeusedwhenusingtheNP11FLlens.• Pleasedonotusethelensshiftfunctionwhenprojectingportraitimages.Pleaseuseitwiththelensinthecenter.

* Refertothelensshifttableonthenextpageforthedrawingnumberofthelensshiftrange.

Desk/frontprojection

100%V

100%H

1

23 4

10%H 10%H



Descriptionofsymbols:Vindicatesvertical(heightoftheprojectedimage),Hindicateshorizontal(widthofthepro-jectedimage).

Ceiling/frontprojector

100%V

100%H

10%H 10%H

1

2

3 4



163

9. Appendix

Lens shift tableApplicablemodels Drawingnumber Lensunit

NP30ZL NP12ZL NP13ZL NP14ZL NP15ZLNP-PA622U/NP-PA522U

① 50%V 50%V 50%V 50%V 50%V② 10%V 10%V 10%V 10%V 10%V③ 20%H* 30%H 30%H 30%H 30%H④ 20%H* 30%H 30%H 30%H 30%H

NP-PA672W/NP-PA572W

① 50%V 60%V 60%V 60%V 60%V② 10%V 10%V 10%V 10%V 10%V③ 20%H 30%H 30%H 30%H 30%H④ 20%H 30%H 30%H 30%H 30%H

NP-PA722X/NP-PA622X

① 35%V 50%V 50%V 50%V 50%V② 10%V 10%V 10%V 10%V 10%V③ 20%H 30%H 30%H 30%H 30%H④ 20%H 30%H 30%H 30%H 30%H

* ForPA622U/PA522U,theshiftrangeinthehorizontaldirectionisupto15%Hwhenusingthelensunit“NP13ZL”toprojectascreenexceedingModel150.

Ex.:Whenprojectingona150"screenTheexplanationisforaPA722X/PA622Xprojector(4:3panel)withaNP12ZLlensfitted.• PleasereplacethescreendimensionsandmaximumshiftvalueinthecalculationsforthePA672W/PA572WandPA622U/PA522Uprojectors(16:10panel)aswell.Accordingtothetablesofscreensizesanddimensions(→page161),H=304.8cm,V=228.6cm.Adjustmentrangeintheverticaldirection:Theprojectedimagecanbemovedupwards0.5×228.6cm=114cm,downwards0.1×228.6cm=22cm(whenthelensisatthecenterposition).Foraceiling/frontinstallation,theabovefiguresareinverted.Adjustmentrangeinthehorizontaldirection:Theprojectedimagecanbemovedtotheleft0.3×304.8cm=91cm,totheright0.3×304.8cm=91cm.*Figuresdifferbyseveral%becausethecalculationisapproximate.

164

9. Appendix

❷ Compatible Input Signal ListAnalog Computer Signal

Signal Resolution(dots) AspectRatio RefreshRate(Hz)VGA 640 × 480 4 : 3 60/72/75/85/iMacSVGA 800 × 600 4 : 3 56/60/72/75/85/iMacXGA 1024 × 768 *1 4 : 3 60/70/75/85/iMacXGA+ 1152 × 864 4 : 3 60/70/75/85

WXGA

1280 × 768 *2 15 : 9 601280 × 800 *2 16 : 10 601360 × 768 *5 16 : 9 *4 601366 × 768 *5 16 : 9 *4 60

Quad-VGA 1280 × 960 4 : 3 60/75/85SXGA 1280 × 1024 5 : 4 60/75/85SXGA+ 1400 × 1050 4 : 3 60/75WXGA+ 1440 × 900 16 : 10 60WXGA++ 1600 × 900 16 : 9 60UXGA 1600 × 1200 *3 4 : 3 60/65/70/75WSXGA+ 1680 × 1050 16 : 10 60WUXGA 1920 × 1200 *3 16 : 10 60(ReducedBlanking)2K 2048 × 1080 17 : 9 60FullHD 1920 × 1080 *3 16 : 9 60MAC13" 640 × 480 4 : 3 67MAC16" 832 × 624 4 : 3 75MAC19" 1024 × 768 4 : 3 75MAC21" 1152 × 870 *6 4 : 3 *4 75MAC23" 1280 × 1024 5 : 4 65

ComponentSignal Resolution(dots) AspectRatio RefreshRate(Hz)

HDTV(1080p) 1920 × 1080 16 : 9 50/60HDTV(1080i) 1920 × 1080 16 : 9 48/50/60HDTV(720p) 1280 × 720 16 : 9 50/60SDTV(480p) 720 × 480 4:3/16:9 60SDTV(576p) 720 × 576 4:3/16:9 50SDTV(480i) 720 × 480 4:3/16:9 60SDTV(576i) 720 × 576 4:3/16:9 50

CompositeVideo/S-VideoSignal AspectRatio RefreshRate(Hz)

NTSC 4 : 3 60PAL 4 : 3 50PAL60 4 : 3 60SECAM 4 : 3 50

165

9. Appendix

HDMISignal Resolution(dots) AspectRatio RefreshRate(Hz)

VGA 640 × 480 4 : 3 60SVGA 800 × 600 4 : 3 60XGA 1024 × 768 *1 4 : 3 60HD 1280 × 720 *2 16 : 9 60

WXGA1280 × 768 *2 15 : 9 601280 × 800 *2 16 : 10 601366 × 768 *5 16 : 9 *4 60

Quad-VGA 1280 × 960 4 : 3 60SXGA 1280 × 1024 5 : 4 60SXGA+ 1400 × 1050 4 : 3 60WXGA+ 1440 × 900 16 : 10 60WXGA++ 1600 × 900 16 : 9 60WSXGA+ 1680 × 1050 16 : 10 60UXGA 1600 × 1200 *3 4 : 3 60FullHD 1920 × 1080 *3 16 : 9 60WUXGA 1920 × 1200 *3 16 : 10 602K 2048 × 1080 17 : 9 60WQHD iMac27"

2560 × 1440 16 : 9 60

WQXGA 2560 × 1600 16 : 10 60(ReducedBlanking)

4K3840 × 2160 16 : 9 23.98/24/25/29.97/304096 × 2160 17 : 9 24

HDTV(1080p) 1920 × 1080 16 : 9 24/25/30/50/60HDTV(1080i) 1920 × 1080 16 : 9 48/50/60HDTV(720p) 1280 × 720 16 : 9 50/60SDTV(480i/p) 720/1440 × 480 4:3/16:9 60SDTV(576i/p) 720/1440 × 576 4:3/16:9 50

HDMI 3DSignalResolution(dots) RefreshRate(Hz) AspectRatio 3DFormat

1920 × 1080p

23.98/24

16 : 9

FramePackingSideBySideTopandBottom

25SideBySideTopandBottom


59.94/60SideBySideTopandBottom

1920 × 1080i50

TopandBottomSideBySide

59.94/60TopandBottomSideBySide

1280 × 720p

50FramePackingSideBySideTopandBottom

59.94/60FramePackingSideBySideTopandBottom

166

9. Appendix

DisplayPortSignal Resolution(dots) AspectRatio RefreshRate(Hz)

VGA 640 × 480 4 : 3 60SVGA 800 × 600 4 : 3 60XGA 1024 × 768 *1 4 : 3 60HD 1280 × 720 *2 16 : 9 60

WXGA1280 × 768 *2 15 : 9 601280 × 800 *2 16 : 10 601366 × 768 *5 16 : 9 *4 60

Quad-VGA 1280 × 960 4 : 3 60SXGA 1280 × 1024 5 : 4 60SXGA+ 1400 × 1050 4 : 3 60WXGA+ 1440 × 900 16 : 10 60WXGA++ 1600 × 900 16 : 9 60WSXGA+ 1680 × 1050 16 : 10 60UXGA 1600 × 1200 *3 4 : 3 60FullHD 1920 × 1080 *3 16 : 9 60WUXGA 1920 × 1200 *3 16 : 10 60(ReducedBlanking)2K 2048 × 1080 17 : 9 60WQHD iMac27"

2560 × 1440 16 : 9 60

WQXGA 2560 × 1600 16 : 10 60(ReducedBlanking)

4K3840 × 2160 16 : 9 23.98/24/25/29.97/304096 × 2160 17 : 9 24

HDTV(1080p) 1920 × 1080 16 : 9 24/25/30/50/60HDTV(720p) 1280 × 720 16 : 9 50/60SDTV(480i/p) 720/1440 × 480 4:3/16:9 60SDTV(576i/p) 720/1440 × 576 4:3/16:9 50

DisplayPort3DSignalResolution(dots) RefreshRate(Hz) AspectRatio 3DFormat

1920 × 1080p

23.98/24

16 : 9

FramePackingSideBySideTopandBottom



59.94/60SideBySideTopandBottom

100 FrameSequential120 FrameSequential

1920 × 1080i50

TopandBottomSideBySide

59.94/60TopandBottomSideBySide

1280 × 720p

50FramePackingSideBySideTopandBottom

100 FrameSequential

59.94/60FramePackingSideBySideTopandBottom

120 FrameSequential

*1 NativeresolutiononXGAmodel(PA722X/PA622X)*2 NativeresolutiononWXGAmodel(PA672W/PA572W)*3 NativeresolutiononWUXGAmodel(PA622U/PA522U)*4 ApproximateValue*5 Theprojectormayfailtodisplaythesesignalscorrectlywhen[AUTO]isselectedfor[ASPECTRATIO]intheon-screenmenu. Thefactorydefaultis[AUTO]for[ASPECTRATIO].Todisplaythesesignals,select[16:9]for[ASPECTRATIO].*6 Theprojectormayfailtodisplaythesesignalscorrectlywhen[AUTO]isselectedfor[ASPECTRATIO]intheon-screenmenu. Thefactorydefaultis[AUTO]for[ASPECTRATIO].Todisplaythesesignals,select[4:3]for[ASPECTRATIO].

• Signalsexceedingtheprojector’sresolutionarehandledwithAdvancedAccuBlend.• WithAdvancedAccuBlend,thesizeofcharactersandruledlinesmaybeunevenandcolorsmaybeblurred.• Uponshipment,theprojectorissetforsignalswithstandarddisplayresolutionsandfrequencies,butadjustmentsmayberequireddependingonthetypeofcomputer.

167

9. Appendix

❸ SpecificationsModelname PA622U/PA522U/PA672W/PA572W/PA722X/PA622XMethod ThreeprimarycolorliquidcrystalshutterprojectionmethodSpecificationsofmainparts

Liquidcrystalpanel

Size PA722X/PA622X:0.79"(withMLA)×3(aspectratio:4:3)PA672W/PA572W:0.76"(withMLA)×3(aspectratio:16:10)PA622U/PA522U:0.76"(withMLA)×3(aspectratio:16:10)

Pixels(*1) PA722X/PA622X:786,432(1024dots×768lines)PA672W/PA572W:1,024,000(1280dots×800lines)PA622U/PA522U:2,304,000(1920dots×1200lines)

Projectionlenses Zoom Manual(zoomrangedependsonlens)Focus ManualLensshifting Manual

Lightsource PA722X/PA672W/PA622U:350WAClamp(264WwhenEcomodeison)PA622X/PA572W/PA522U:330WAClamp(264WwhenEcomodeison)

Opticaldevice Opticalisolationbydichroicmirror,combiningbydichroicprismLightoutput(*2) (*3) ECOOFF PA722X:7200lm,PA622X:6200lm,PA672W:6700lm,PA572W:5700lm,PA622U:

6200lm,PA522U:5200lmContrastratio(*2)(allwhite/allblack) PA722X/PA672W/PA622U:6000:1

PA622X/PA572W/PA522U:5000:1Screensize(throwdistance) 30"to500"(throwdistancedependsonlens)Colorreproducibility 10-bitcolorprocessing(approx.1.07billioncolors)(*4)

Audiooutput Built-in10WmonauralspeakerScanningfrequency Horizontal Analog:15kHz,24to100kHz(24kHzorgreaterforRGBinputs),conformingto

VESAstandardsDigital:15kHz,24to153kHz,conformingtoVESAstandards

Vertical Analog:48Hz,50to85Hz,100,120HzconformingtoVESAstandardsDigital:24,25,30,48Hz,50to85Hz,100,120HzconformingtoVESAstandards

Mainadjustmentfunctions Manualzoom,manualfocus,manuallensshift,inputsignalswitching(HDMI1/HDMI2/DisplayPort/BNC/BNC(CV)/BNC(Y/C)/COMPUTER/HDBaseT),autoimageadjust-ment,pictureenlarging,picturepositionadjustment,muting(bothvideoandaudio),poweron/standby,on-screendisplay/selection,etc.

Max.displayresolution(horizontal×vertical)

Analog:1920×1200(handledwithAdvancedAccuBlend)Digital:4096×2160(handledwithAdvancedAccuBlend)

InputsignalsR,G,B,H,V RGB:0.7Vp-p/75Ω

Y:1.0Vp-p/75Ω(withNegativePolaritySync)Cb,Cr(Pb,Pr):0.7Vp-p/75ΩH/VSync:4.0Vp-p/TTLCompositeSync:4.0Vp-p/TTLSynconG:1.0Vp-p/75Ω(withSync)

Compositevideo 1.0Vp-p/75ΩS-Video Y:1.0Vp-p/75Ω

C:286Vp-p/75ΩComponent Y:1.0Vp-p/75Ω(withSync)

Cb,Cr(Pb,Pr):0.7Vp-p/75ΩDTV:480i,480p,720p,1080i,1080p(60Hz)

576i,576p,720p,1080i(50Hz)DVD:Progressivesignal(50/60Hz)

Audio 0.5Vrms/22kΩorgreaterInput/outputconnectors

Computer/Com-ponent

Videoinput MiniD-Sub15-pin×1,BNCconnector×5Audioinput Stereominijack×2Audiooutput Stereominijack×1(commonforallsignals)

HDMI Videoinput HDMI®ConnectortypeA×2DeepColor(colordepth):8-/10-/12-bitcompatibleColorimetry:RGB,YcbCr444andYcbCr422compatibleLipSynccompatible,HDCPcompatible(*5),Supports4Kand3D

Videooutput RepeaterAudioinput HDMI:Samplingfrequency–32/44.1/48kHz,Samplingbits–16/20/24bits

HDBaseT Videoinput DeepColor(colordepth):Support8/10/12bitsColorimetry:SupportRGB,YCbCr444andYCbCr422SupportLipSync,HDCP(*5),4K,3D

Audioinput Samplingfrequency:32/44.1/48kHzSamplingbit:16/20/24bit

168

9. Appendix

Modelname PA622U/PA522U/PA672W/PA572W/PA722X/PA622XDisplayPort Videoinput DisplayPort×1

Datarate:2.7Gbps/1.62GbpsNo.lanes:1lane/2lanes/4lanesColordepth:6-bit,8-bit,10-bitColorimetry:RGB,YcbCr444andYcbCr422compatibleHDCPcompatible(*5)

Audioinput DisplayPort:Samplingfrequency–32/44.1/48kHz,Samplingbits–16/20/24bitsBNC(CV) Videoinput BNC×1

Audioinput (sharedwiththeBNC,BNC(CV),BNC(Y/C)audioinputterminals)BNC(Y/C) Videoinput BNC×2

Audioinput (sharedwiththeBNC,BNC(CV),BNC(Y/C)audioinputterminals)PCcontrolconnector D-Sub9-pin×1USBport USBtypeA×1Ethernet/HDBaseTport RJ-45×1,SupportsBASE-TXRemoteconnector Stereominijack×13DSYNCoutputterminal 5V/10mA,synchronizedsignaloutputfor3Duse

Usageenvironment Operatingtemperature:5to40ºC(*6)

Operatinghumidity:20to80%(withnocondensation)Storagetemperature:-10to50ºC(*6)

Storagehumidity:20to80%(withnocondensation)Operatingaltitude:0to2700m/8800feet(1700to2700m/5500to8800feet:Set[FANMODE]to[HIGHALUTITUDE])

Powersupply 100-240VAC,50/60HzPowercon-sumption

Ecomodeoff PA722X/PA672W/PA622U:483W(100-130V)/460W(200-240V)PA622X/PA572W/PA522U:463W(100-130V)/440W(200-240V)

Ecomodeon PA722X/PA672W/PA622U/PA622X/PA572W/PA522U:377W(100-130V)/362W(200-240V)

STANDBY(NORAML) 0.11 WSTANDBY(HDBaseTSTANDBY)

7.0 W

Ratedinputcurrent PA722X/PA672W/PA622U:5.5A-2.2APA622X/PA572W/PA522U:5.1A-2.2A

Externaldimensions 19.7"(width)×5.68"(height)×14.1"(depth)/499(width)×142(height)×359(depth)mm(notincludingprotrudingparts)19.7"(width)×6.38"(height)×14.5"(depth)/499(width)×162(height)×368(depth)mm(includingprotrudingparts)

Weight 18.5lbs/8.4kg(notincludinglens)

*1 Effectivepixelsaremorethan99.99%.*2 Thisisthelightoutputvalue(lumens)whenthe[PRESET]modeissetto[HIGH-BRIGHT].Thelightoutputvalueswilldropto80%when[ON]isselectedfor[ECOMODE].Ifanyothermodeisselectedasthe[PRESET]mode,thelightoutputvaluemaydropslightly.

*3 CompliancewithISO21118-2005*4 Fullcolor(approx.16.77millioncolorsorgreater)whentheHDBaseTinputconnectorisselected.*5 HDMI®(DeepColor,LipSync)withHDCP WhatisHDCP/HDCPtechnology? HDCPisanacronymforHigh-bandwidthDigitalContentProtection.HighbandwidthDigitalContentProtection(HDCP)isasystemforpreventingillegalcopyingofvideodatasentoveraHigh-DefinitionMultimediaInterface(HDMI).

IfyouareunabletoviewmaterialviatheHDMIinput,thisdoesnotnecessarilymeantheprojectorisnotfunctioningproperly.WiththeimplementationofHDCP,theremaybecasesinwhichcertaincontentisprotectedwithHDCPandmightnotbedisplayedduetothedecision/intentionoftheHDCPcommunity(DigitalContentProtection,LLC).

Video:DeepColor;8/10/12-bit,LipSync Audio:LPCM;upto2ch,samplerate32/44.1/48KHz,samplebit;16/20/24-bit*6 35to40ºC–“Forcedecomode” (PA622U/PA522Uwillshifttotheeco-modeinstagesstartingfrom33°C.)• Thesespecificationsandtheproduct’sdesignaresubjecttochangewithoutnotice.

169

9. Appendix

250 (9.8)

162

(6.4

)

359

(14.

1)

368

(14.

5)

78.5

(3.1

)14

2 (5

.6)

200

(7.9

)

499 (19.6)

❹ Cabinet Dimensions

Lenscenter

Lenscenter

Holesforceilingmount

Unit:mm(inch)

170

9. Appendix

❺ Mounting the cable cover (sold separately)

Mountingtheseparatelysoldcablecover(NP04CV)ontheprojectorallowsyouhidethecablesforacleanerappearance.

CAUTION• Aftermountingthecablecover,besuretofastenusingthescrewsprovided.Ifnot,thecablecovercouldfall,damagingthecablecoverandpossiblyresultingininjury.

• Donotbundlethepowercordandplaceitunderthecablecover.Doingsocouldleadtofire.

• Donotapplyexcessive forceto thecablecover.Doingsocoulddamagethecablecover, resulting in theprojectorfallingorcausinginjury.

MountingPreparations:

1. Connectthepowercordandcablestotheprojector(theconnectioncordsareomittedfromthediagrams).

2. PrepareaPhillipsscrewdriver.

1. Insert the two round protrusions on the left and right edges of the cable cover into the grooves in the bottom of the projector to line it up.

NOTE:Becarefulnottoletthepowercordandcablesgetpinchedbythecable cover.

2. Turn the cable cover screw clockwise.

• Tightenthescrewsecurely.

1

2

Removing1. Turn the cable cover screw counterclockwise until it turns

loosely.

• Holdthecablecoverwhiledoingthistopreventitfromfall-ing.

• Thescrewdoesnotcomecompletelyoff.

2. Remove the cable cover.

• Turnthecablecoveralittle,thenliftitoff.

1

2

171

9. Appendix

❻ Pin assignments and signal names of main connectorsCOMPUTER IN/ Component Input Connector (Mini D-Sub 15 Pin)

Connection and signal level of each pin

51 42 310

11 12 13 14 156 97 8

Signal LevelVideosignal:0.7Vp-p(Analog)Syncsignal:TTLlevel

Pin No. RGBSignal(Analog) YCbCr Signal1 Red Cr2 GreenorSynconGreen Y3 Blue Cb4 Ground5 Ground6 RedGround CrGround7 GreenGround YGround8 BlueGround CbGround9 NoConnection10 SyncSignalGround11 NoConnection12 Bi-directionalDATA(SDA)13 HorizontalSyncorCompositeSync14 VerticalSync15 DataClock

HDMI 1 IN/HDMI 2 IN Connector (Type A)

1 3 5 7 9 11 13 15 17 192 4 6 8 10 12 14 16 18

Pin No. Signal Pin No. Signal1 TMDSData2+ 11 TMDSClockShield2 TMDSData2Shield 12 TMDSClock−3 TMDSData2− 13 CEC4 TMDSData1+ 14 Disconnection5 TMDSData1Shield 15 SCL6 TMDSData1− 16 SDA7 TMDSData0+ 17 DDC/CECgrounding8 TMDSData0Shield 18 +5Vpowersupply9 TMDSData0− 19 Hotplugdetection10 TMDSClock+

DisplayPort IN Connector

1 3 5 7 9 11 13 15 17 192 4 6 8 10 12 14 16 18 20

Pin No. Signal Pin No. Signal1 Mainlinklane3− 11 Grounding02 Grounding3 12 Mainlinklane0+3 Mainlinklane3+ 13 Configuration14 Mainlinklane2− 14 Configuration25 Grounding2 15 Supplementarychannel+6 Mainlinklane2+ 16 Grounding47 Mainlinklane1− 17 Supplementarychannel−8 Grounding1 18 Hotplugdetection9 Mainlinklane1+ 19 Return10 Mainlinklane0− 20 +3.3Vpowersupply

172

9. Appendix

Ethernet/HDBase T Port (RJ-45)

1 2 3 4 5 6 7 8

Pin No. Signal1 TxD+/HDBT0+2 TxD−/HDBT0−3 RxD+/HDBT1+4 Disconnection/HDBT2+5 Disconnection/HDBT2−6 RxD−/HDBT1−7 Disconnection/HDBT3+8 Disconnection/HDBT3−

USB-A Port (Type A)

1

3

2

4

Pin No. Signal1 VBUS2 D−3 D+4 Grounding

PC CONTROL Port (D-Sub 9 Pin)

12345

6789

Communications protocol

Pin No. Signal1 Unused2 RxD receptiondata3 TxD transmissiondata4 Unused5 Grounding6 Unused7 RTS transmissionrequest8 CTS transmissionallowed9 Unused

173

9. Appendix

❼ TroubleshootingThissectionhelpsyouresolveproblemsyoumayencounterwhilesettinguporusingtheprojector.

Indicator Messages

Power Indicator

Indicatordisplay Projectorstatus ProcedureOff Powerisoff. –Flashing Blue(shortflashes) Preparingtoturnpoweron Waitawhile.

Blue(longflashes) Offtimer(enabled)Programtimer(offtimeenabled)

–

Orange(shortflashes)

Projectorcooling Waitawhile.

Orange(longflashes) Programtimer(ontimeenabled)Lit Blue Poweron –

Red Standbymode(NORMAL) –Orange Standbymode(HDBaseTSTANDBY) –

Status Indicator

Indicatordisplay Projectorstatus ProcedureOff Noproblem,or

standbymode–

Flashing Red(cyclesof1)

Coverproblem Thelampcoverisnotproperlymounted.Mountitproperly.(→ Page144)

Red(cyclesof4)

Fanproblem Thecoolingfanhasstoppedturning.ContactanNECprojectorcustomersupportcenterforrepairs.

Flashing Orange Networkconflict It is not possible to connect theprojector’s built-in LANandwirelessLANsimultaneouslytothesamenetwork.Toconnecttheprojector’sbuilt-inLANandwirelessLANsimultaneously,connectthemtodifferentnetworks.

Lit Green STANDBYMODEinsleepmode*

–

Orange Buttonhasbeenpressedwhileprojec-torisinkeylockmode

Theprojector’skeysarelocked.Thesettingmustbecanceledtooperatetheprojector.(→Page104)

Projector’sIDnumberandremotecontrol’sIDnumberdonotmatch

CheckthecontrolIDs.(→Pages105)

* Sleepmodereferstothestatewherebythefunctionalrestrictionsduetothestandbymodesettingareremoved.

174

9. Appendix

Lamp Indicator

Indicatordisplay Projectorstatus ProcedureOff Thelampisturnedoff. –Flashing Green Preparingtorelightlampafter

lightinghasfailedWaitawhile.

Red Lampreplacementgraceperiod

Thelamphasreachedtheendofitsservicelifeandisnowinthereplacementgraceperiod(100hours).Re-placethelampassoonaspossible.(→page142)

Red(cyclesof6)

Lampdoesnotlight Thelamphasnotturnedon.Waitatleast1minute,thenturnthepowerbackon.Ifthelampstilldoesnotlight,contactanNECprojectorcustomersupportcenter.

Lit Red Lampusagetimeexceeded Thelamphasexceededitsusagetime.Theprojector’spowercannotbeturnedonuntilthelampisreplaced.(→page142)

Green Lamplit –

Temp. Indicator

Indicatordisplay Projectorstatus ProcedureOff NoproblemFlashing Red(cyclesof2) Temperatureproblem The temperature protector has beenactivated. If the

roomtemperatureishigh,movetheprojectortoacoolplace.Iftheproblemstillpersists,contactanNECprojec-torcustomersupportcenter.

Lit Orange Highsurroundingtemperature Thesurroundingtemperature ishigh.Lower theroomtemperature.

If the temperature protector is activatedIftheprojector’sinternaltemperaturerisesabnormally,thelampturnsoffandthetemperatureindicatorflashes(re-peatedlyincyclesof2).Itmayhappenthattheprojector’stemperatureprotectorissimultaneouslyactivatedandtheprojector’spowerturnsoff.Ifthishappens,dothefollowing:- Unplugthepowercordfromthepoweroutlet.

- Ifusinginaplacewherethesurroundingtemperatureishigh,movetheprojectortoadifferent,coolplace.

- Ifthereisdustintheventilationholes,clean.(→pages138and141)

- Waitassuchabout1hourfortheprojector’sinternaltemperaturetolower.

175

9. Appendix

Common Problems & Solutions(→“Power/Status/LampIndicator”onpage174.)

Problem CheckTheseItems

Does not turn onor shut down

• Checkthatthepowercordispluggedinandthatthepowerbuttonontheprojectorcabinetortheremotecontrolis on� (→ pages 13, 14)

• Ensurethatthelampcoverisinstalledcorrectly.(→ page 144)• Checktoseeiftheprojectorhasoverheated.Ifthereisinsufficientventilationaroundtheprojectororiftheroom

where you are presenting is particularly warm, move the projector to a cooler location�• Checktoseeifyoucontinuetousetheprojectorforanother100hoursafterthelamphasreachedtheendofits

life� If so, replace the lamp� After replacing the lamp, reset the lamp hours used� (→ page 116)• Thelampmayfailtolight.Waitafullminuteandthenturnonthepoweragain.• Set[FANMODE]to[HIGHALTITUDE]whenusingtheprojectorataltitudesapproximately5500feet/1600meters

or higher� Using the projector at altitudes approximately 5500 feet/1600 meters or higher without setting to [HIGH ALTITUDE] can cause the projector to overheat and the projector could shut down� If this happens, wait a couple minutes and turn on the projector� (→ page 97)

If you turn on the projector immediately after the lamp is turned off, the fans run without displaying an image for some time and then the projector will display the image� Wait for a moment�

Will turn off • Ensurethatthe[OFFTIMER],[AUTOPOWEROFF]or[PROGRAMTIMER]isoff.(→ page 100, 115)

No picture • Checkiftheappropriateinputisselected.(→ page 16) If there is still no picture, press the INPUT button or one of the input buttons again�

• Ensureyourcablesareconnectedproperly.• Usemenustoadjustthebrightnessandcontrast.(→ page 76)• Ensurethatthelenscoverisopen.(→ page 14)• Resetthesettingsoradjustmentstofactorypresetlevelsusingthe[RESET]intheMenu.(→ page 116)• EnteryourregisteredkeywordiftheSecurityfunctionisenabled.(→ page 36)• IftheHDMIinputortheDisplayPortsignalcannotbedisplayed,trythefollowing.

- Reinstall your driver for the graphics card built in your computer, or use the updated driver� For reinstalling or updating your driver, refer to the user guide accompanied with your computer or graphics

card, or contact the support center for your computer manufacturer� Install the updated driver or OS on your own responsibility� We are not liable for any trouble and failure caused by this installation�

• SignalsmaynotbesupporteddependingontheHDBaseTtransmissiondevice.IRandRS232Ccannotbeusedin certain cases as well�

• BesuretoconnecttheprojectorandnotebookPCwhiletheprojectorisinstandbymodeandbeforeturningonthe power to the notebook PC�

In most cases the output signal from the notebook PC is not turned on unless connected to the projector before being powered up�* If the screen goes blank while using your remote control, it may be the result of the computer’s screen-saver

or power management software�• Seealsothepage177�

Picture suddenly becomes dark

• CheckiftheprojectorisintheForcedECOmodebecauseoftoohighambienttemperature.Ifthisisthecase,lower the internal temperature of the projector by selecting [HIGH] for [FAN MODE]� (→ page 97)

Color tone or hue is unusual

• Checkifanappropriatecolorisselectedin[WALLCOLOR].Ifso,selectanappropriateoption.(→ page 97)• Adjust[HUE]in[PICTURE].(→ page 77)

Image isn’t square to the screen

• Repositiontheprojectortoimproveitsangletothescreen.(→ page 18)• UsetheKeystonecorrectionfunctiontocorrectthetrapezoiddistortion.(→ page 33)

Picture is blurred • Adjustthefocus.(→ page 20)• Repositiontheprojectortoimproveitsangletothescreen.(→ page 18)• Ensure that the distance between the projector and screen is within the adjustment range of the lens.

(→ page 158)• Hasthelensbeenshiftedbyanamountexceedingtheguaranteedrange?(→ page 162)• Condensationmayformonthelensiftheprojectoriscold,broughtintoawarmplaceandisthenturnedon.

Should this happen, let the projector stand until there is no condensation on the lens�

Flicker appears on screen

• Set[FANMODE]tootherthan[HIGHALTITUDE]modewhenusingtheprojectorataltitudesapproximately5500feet/1600 meters or lower� Using the projector at altitudes less than approximately 5500 feet/1600 meters and setting to [HIGH ALTITUDE] can cause the lamp to overcool, causing the image to flicker� Switch [FAN MODE] to [AUTO]� (→ page 97)

Image is scrolling vertically, horizontally or both

• Checkthecomputer’sresolutionandfrequency.Makesurethattheresolutionyouaretryingtodisplayissupportedby the projector� (→ page 164)

• AdjustthecomputerimagemanuallywiththeHorizontal/Verticalinthe[IMAGEOPTIONS].(→ page 79)

176

9. Appendix

Problem CheckTheseItems

Remote control does not work

• Installnewbatteries.(→ page 10)• Makesuretherearenoobstaclesbetweenyouandtheprojector.• Standwithin22feet(7m)oftheprojector.(→ page 11)• Toperformcomputermouseoperationsusingtheprojector’sremotecontrol,connecttheoptionalmousereceiver

to the computer� (→ page 31)

Indicator is lit or blinking

• SeethePOWER/STATUS/LAMPIndicator.(→ page 173)

Cross color in RGB mode

• PresstheAUTOADJ.buttonontheprojectorcabinetortheremotecontrol.(→ page 24)• Adjustthecomputerimagemanuallywith[CLOCK]/[PHASE]in[IMAGEOPTIONS]inthemenu.(→ page 78)

Formoreinformationcontactyourdealer.

177

9. Appendix

If there is no picture, or the picture is not displayed correctly.

• PoweronprocessfortheprojectorandthePC.

BesuretoconnecttheprojectorandnotebookPCwhiletheprojectorisinstandbymodeandbeforeturningonthepowertothenotebookPC.

InmostcasestheoutputsignalfromthenotebookPCisnotturnedonunlessconnectedtotheprojectorbeforebeingpoweredup.

NOTE:Youcancheckthehorizontalfrequencyofthecurrentsignalintheprojector’smenuunderInformation.Ifitreads“0kHz”,this means there is no signal being output from the computer. (→ page 119 or go to next step)

• Enablingthecomputer’sexternaldisplay.

DisplayinganimageonthenotebookPC’sscreendoesnotnecessarilymeanitoutputsasignaltotheprojector.WhenusingaPCcompatiblelaptop,acombinationoffunctionkeyswillenable/disabletheexternaldisplay.Usu-ally,thecombinationofthe“Fn”keyalongwithoneofthe12functionkeysgetstheexternaldisplaytocomeonoroff.Forexample,NEClaptopsuseFn+F3,whileDelllaptopsuseFn+F8keycombinationstotogglethroughexternaldisplayselections.

• Non-standardsignaloutputfromthecomputer

IftheoutputsignalfromanotebookPCisnotanindustrystandard,theprojectedimagemaynotbedisplayedcorrectly.Shouldthishappen,deactivatethenotebookPC’sLCDscreenwhentheprojectordisplayisinuse.EachnotebookPChasadifferentwayofdeactivate/reactivatethelocalLCDscreensasdescribedinthepreviousstep.Refertoyourcomputer’sdocumentationfordetailedinformation.

• ImagedisplayedisincorrectwhenusingaMac

WhenusingaMacwiththeprojector,settheDIPswitchoftheMacadapter(notsuppliedwiththeprojector)ac-cordingtoyourresolution.Aftersetting,restartyourMacforthechangestotakeaffect.

ForsettingdisplaymodesotherthanthosesupportedbyyourMacandtheprojector,changingtheDIPswitchonaMacadaptermaybounceanimageslightlyormaydisplaynothing.Shouldthishappen,settheDIPswitchtothe13"fixedmodeandthenrestartyourMac.Afterthat,restoretheDIPswitchestoadisplayablemodeandthenrestarttheMacagain.

NOTE:AVideoAdaptercablemanufacturedbyAppleComputerisneededforaMacBookwhichdoesnothaveaminiD-Sub15-pin connector.

• MirroringonaMacBook

* WhenusingtheprojectorwithaMacBook,outputmaynotbesetto1024×768unless“mirroring”isoffonyourMacBook.Refertoowner’smanualsuppliedwithyourMaccomputerformirroring.

• FoldersoriconsarehiddenontheMacscreen

Foldersoriconsmaynotbeseenonthescreen.Shouldthishappen,select[View]→[Arrange]fromtheApplemenuandarrangeicons.

178

9. Appendix

❽ PC Control Codes and Cable ConnectionPC Control Codes

Function Code Data

POWER ON 02H 00H 00H 00H 00H 02H

POWER OFF 02H 01H 00H 00H 00H 03H

INPUT SELECT HDMI1 02H 03H 00H 00H 02H 01H A1H A9H

INPUT SELECT HDMI2 02H 03H 00H 00H 02H 01H A2H AAH

INPUT SELECT DisplayPort 02H 03H 00H 00H 02H 01H A6H AEH

INPUT SELECT BNC 02H 03H 00H 00H 02H 01H 02H 0AH

INPUT SELECT BNC(CV) 02H 03H 00H 00H 02H 01H 06H 0EH

INPUT SELECT BNC(Y/C) 02H 03H 00H 00H 02H 01H 0BH 13H

INPUT SELECT COMPUTER 02H 03H 00H 00H 02H 01H 01H 09H

INPUT SELECT HDBaseT 02H 03H 00H 00H 02H 01H 20H 28H

PICTURE MUTE ON 02H 10H 00H 00H 00H 12H

PICTURE MUTE OFF 02H 11H 00H 00H 00H 13H

SOUND MUTE ON 02H 12H 00H 00H 00H 14H

SOUND MUTE OFF 02H 13H 00H 00H 00H 15H

NOTE:ContactyourlocaldealerforafulllistofthePCControlCodesifneeded.

Cable ConnectionCommunicationProtocol

Baud rate ��38400 bpsData length ��8 bitsParity ��No parityStop bit ��One bitX on/off ��NoneCommunications procedure ��Full duplex

NOTE:Dependingontheequipment,alowerbaudratemayberecommendedforlongcableruns.

PC Control Connector (D-SUB 9P)

NOTE 1: Pins 1, 4, 6 and 9 are no used.

NOTE2:Jumper“RequesttoSend”and“CleartoSend”togetheronbothendsofthecabletosimplifycableconnection.

NOTE3:Forlongcablerunsitisrecommendedtosetcommunicationspeedwithinprojectormenusto9600bps.

1 52 43

6 7 98

ToGNDofPC

ToRxDofPC

ToTxDofPC

ToRTSofPC

ToCTSofPC

179

9. Appendix

❾ Troubleshooting Check ListBeforecontactingyourdealerorservicepersonnel,checkthefollowinglisttobesurerepairsareneededalsobyreferringtothe“Troubleshooting”sectioninyouruser’smanual.Thischecklistbelowwillhelpussolveyourproblemmoreefficiently.* Printthispageandthenextpageforyourcheck.

Frequency of occurrence □ always □sometimes(Howoften?_____________________) □other(__________________)

Power□ No power (POWER indicator does not light blue)� See also “Status

Indicator (STATUS)”�Power cord’s plug is fully inserted into the wall outlet�□

Lamp cover is installed correctly�□

Lamp Hours Used (lamp operation hours) was cleared after □lamp replacement�No power even though you press and hold the POWER but-□ton�

□ Shut down during operation�Power cord’s plug is fully inserted into the wall outlet�□

Lamp cover is installed correctly�□

[AUTO POWER OFF] is turned off (only models with the [AUTO □POWER OFF] function)�[OFF TIMER] is turned off (only models with the [OFF TIMER] □function)�

Video and Audio□ No image is displayed from your PC or video equipment to the

projector�Still no image even though you connect the projector to the PC □first, then start the PC�Enabling your notebook PC’s signal output to the projector�□

• Acombinationoffunctionkeyswillenable/disabletheexter-naldisplay.Usually,thecombinationofthe“Fn”keyalongwithoneofthe12functionkeysturnstheexternaldisplayon or off.

No image (blue or black background, no display)�□

Still no image even though you press the AUTO ADJUST □button�Still no image even though you carry out [RESET] in the □projector’s menu�Signal cable’s plug is fully inserted into the input connector□

A message appears on the screen�□(_____________________________________________)The source connected to the projector is active and available�□

Still no image even though you adjust the brightness and/or □the contrast�Input source’s resolution and frequency are supported by the □projector�

□ Image is too dark�Remains unchanged even though you adjust the brightness □and/or the contrast�

□ Image is distorted�Image appears to be trapezoidal (unchanged even though you □carry out the [KEYSTONE] adjustment)�

□ Parts of the image are lost�Still unchanged even though you press the AUTO ADJUST □button�Still unchanged even though you carry out [RESET] in the □projector’s menu�

□ Image is shifted in the vertical or horizontal direction�Horizontal and vertical positions are correctly adjusted on a □computer signal�Input source’s resolution and frequency are supported by the □projector�Some pixels are lost�□

□ Image is flickering�Still unchanged even though you press the AUTO ADJUST □button�Still unchanged even though you carry out [RESET] in the □projector’s menu�Image shows flickering or color drift on a computer signal�□

Still unchanged even though you change [FAN MODE] from □[HIGH ALTITUDE] to [AUTO]�

□ Image appears blurry or out of focus�Still unchanged even though you checked the signal’s resolution □on PC and changed it to projector’s native resolution�Still unchanged even though you adjusted the focus�□

□ No sound�Audio cable is correctly connected to the audio input of the □projector�Still unchanged even though you adjusted the volume level�□

AUDIO OUT is connected to your audio equipment (only models □with the AUDIO OUT connector)�

Other□ Remote control does not work�

No obstacles between the sensor of the projector and the □remote control�Projector is placed near a fluorescent light that can disturb the □infrared remote controls�Batteries are new and are not reversed in installation� □

□ Buttons on the projector cabinet do not work (only models with the [CONTROL PANEL LOCK] function)

[CONTROL PANEL LOCK] is not turned on or is disabled in □the menu�Still unchanged even though you press and hold the EXIT button □for a minimum of 10 seconds�

180

9. Appendix

In the space below please describe your problem in detail.

Information on application and environment where your projector is used

Projector PC

Blu-rayplayer

Projector

Model number:Serial No�:Date of purchase:Lamp operating time (hours):Eco Mode: □ OFF □ ONInformation on input signal:

Horizontal synch frequency [ ] kHzVertical synch frequency [ ] HzSynch polarity H □ (+) □ (−) V □ (+) □ (−)Synch type □ Separate □ Composite □ Sync on Green

STATUS Indicator:Steady light □ Orange □ GreenFlashing light [ ] cycles

Remote control model number:

Installation environment

Screen size: inchScreen type: □ White matte □ Beads □ Polarization

□ Wide angle □ High contrastThrow distance: feet/inch/mOrientation: □ Ceiling mount □ DesktopPower outlet connection:□ Connected directly to wall outlet□ Connected to power cord extender or other (the

numberofconnectedequipment______________)□ Connected to a power cord reel or other (the number

ofconnectedequipment______________)

Computer

Manufacturer:

Model number:

Notebook PC □ / Desktop □

Native resolution:

Refresh rate:

Video adapter:

Other:

Videoequipment

VCR, Blu-ray player, Video camera, Video game or other

Manufacturer:

Model number:Signal cable

NECstandardorothermanufacturer’scable?Model number: Length: inch/m

Distribution amplifierModel number:

SwitcherModel number:

AdapterModel number:

©NECDisplaySolutions,Ltd.2014 7N951971

Documents

Projector PA622U/PA522U PA672W/PA572W PA722X/ · PDF fileProjector PA622U/PA522U. PA672W/PA572W PA722X/PA622X. User’s Manual. ... , NEC will not be responsible for any claims on