ProLight PUMH-60FTL-N74N 60W COB Light-Engine LEDs Version: 1 · 2020-03-27 · We Provide the Light to the world No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320, Taiwan (R.O.C.)

We Provide the Light to the world

No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320,

Taiwan (R.O.C.)

Tel ：+886-3-461-8618

Fax ：+886-3-461-8677

www.prolightopto.com

ProLight PUMH-60FTL-N74N60W COB Light-Engine LEDsTechnical DatasheetVersion: 1.4

Features‧High flux density of lighting source ‧Good color uniformity‧RoHS compliant‧More energy efficient than incandescent andmost halogen lamps‧No UV‧Long lifetime

Main Applications ‧Architectural and Entertainment Lighting‧Medical Lighting‧Transportation‧Spot Lighting‧Emergency Vehicle Lighting ‧Machine Vision

Introduction‧ The input power is 60 Watt, the multi-chip ultra high power ProEngineSeries delivers never before seen luminous flux output from a single emitter. The superficial illuminating nature of ProEngine makes them the referencein spot lighting, typical applications include architectural and entertainment lighting, medical lighting, transportation, emergency vehicle lighting and machine vision.

2019/08DS-0469

http://www.prolightopto.com/



Taiwan (R.O.C.)

Tel ：+886-3-461-8618

Fax ：+886-3-461-8677


Mechanical Dimensions

2

Notes:

1. The cathode side of the device is denoted by the “ + / - “ mark on the part body.

2. Drawing not to scale.

3. All dimensions are in millimeters.

4. Unless otherwise indicated, tolerances are ± 0.30mm.

5. Please do not use a force of over 0.3kgf impact or pressure on the lens of the LED, otherwise

it will cause a catastrophic failure.

*The appearance and specifications of the product may be modified for improvement without notice.




Taiwan (R.O.C.)

Tel ：+886-3-461-8618

Fax ：+886-3-461-8677


3

Flux Characteristics at 700mA, TC = 25°CRadiation

PatternColor

Part Number

COB

Luminous Flux ΦV (lm)

Minimum Typical

Lambertian

Red

PUMH-60FTL-N74N

390 460

Green 690 815

Blue 140 165

White 980 1160

● ProLight maintains a tolerance of ± 7% on flux and power measurements.● Please do not drive at rated current more than 1 second without proper heat sink.

Electrical Characteristics at 700mA, TC = 25°CThermal Resistance

Forward Voltage VF (V) Junction to Board

Color Min. Typ. Max. (°C/ W)

Red 15.0 16.5 20.0

0.4Green 18.0 22.0 23.0

Blue 18.0 21.0 23.0

White 17.0 19.0 22.0

● ProLight maintains a tolerance of ± 0.5V for Voltage measurements.

Optical Characteristics at 700mA, TC = 25°C Total

included Viewing

Dominant Wavelength λD, Angle Angle

RadiationColor

or Color Temperature CCT (degrees) (degrees)

Pattern Min. Typ. Max. θ0.90V 2 θ1/2

Lambertian

Red 620 nm 623 nm 630 nm 160 120

Green 520 nm 524 nm 528 nm 160 120

Blue 453 nm 455 nm 457 nm 160 120

White 5590 K 6020 K 6500 K 160 120

● ProLight maintains a tolerance of ± 1nm for dominant wavelength measurements.

● ProLight maintains a tolerance of ± 5% for CCT measurements.




Taiwan (R.O.C.)

Tel ：+886-3-461-8618

Fax ：+886-3-461-8677


4

Absolute Maximum RatingsParameter Red/Green/Blue/White

Max DC Forward Current (mA) 800

Peak Pulsed Forward Current (mA) 1000 (less than 1/10 duty cycle@1KHz)

ESD Sensitivity±2000V

(HBM per MIL-STD-883E Method 3015.7)

LED Junction Temperature 120°C

Operating Board Temperature-40°C - 85°C

at Maximum DC Forward Current

Storage Temperature -40°C - 120°C

Reverse Voltage Not designed to be driven in reverse bias




Taiwan (R.O.C.)

Tel ：+886-3-461-8618

Fax ：+886-3-461-8677


0.28

0.30

0.32

0.34

0.36

0.38

0.40

0.26 0.28 0.30 0.32 0.34 0.36 0.38

y

x

Planckian(BBL)

5590 K

6020 K

White

WAWB

6500 K

5

Color BinWhite Binning Structure Graphical Representation

White Bin Structure

Bin Code x yTyp. CCT

(K)Bin Code x y

Typ. CCT

(K)

WA

0.3300 0.3560

5800 WB

0.3207 0.3473

62500.3207 0.3473 0.3113 0.3385

0.3221 0.3246 0.3142 0.3172

0.3300 0.3320 0.3221 0.3246

● Tolerance on each color bin (x , y) is ± 0.005




Taiwan (R.O.C.)

Tel ：+886-3-461-8618

Fax ：+886-3-461-8677


0.0

0.2

0.4

0.6

0.8

1.0

350 400 450 500 550 600 650 700 750 800 850

Rela

tive S

pectr

al P

ow

er

Dis

trib

ution

Wavelength (nm)

Standard Eye Response CurveWhite

0.0

0.2

0.4

0.6

0.8

1.0

350 400 450 500 550 600 650 700 750 800

Rela

tive S

pectr

al P

ow

er

Dis

trib

ution

Wavelength (nm)

Blue

Green Red

6

Color Spectrum, TJ = 25°C

2. White

1. Blue、Green、Red




Taiwan (R.O.C.)

Tel ：+886-3-461-8618

Fax ：+886-3-461-8677


0

200

400

600

800

1000

1200

12 14 16 18 20 22 24 26

Avera

ge F

orw

ard

Curr

ent

(mA

)

Forward Voltage (V)

0

200

400

600

800

1000

1200

12 14 16 18 20 22 24 26

Avera

ge F

orw

ard

Curr

ent

(mA

)

Forward Voltage (V)

0

200

400

600

800

1000

1200

14 16 18 20 22 24 26 28A

vera

ge F

orw

ard

Curr

ent

(mA

)

Forward Voltage (V)

0

200

400

600

800

1000

1200

8 10 12 14 16 18 20 22

Avera

ge F

orw

ard

Curr

ent

(mA

)

Forward Voltage (V)

7

Forward Current Characteristics, TJ = 25°C 1. Forward Voltage vs. Forward Current

GreenRed

WhiteBlue




Taiwan (R.O.C.)

Tel ：+886-3-461-8618

Fax ：+886-3-461-8677


0.0

0.2

0.4

0.6

0.8

1.0

1.2

1.4

1.6

0 200 400 600 800 1000 1200

Rela

tive L

um

inous F

lux

Forward Current (mA)

0.0

0.2

0.4

0.6

0.8

1.0

1.2

1.4

1.6

0 200 400 600 800 1000 1200

Rela

tive R

adio

metr

ic P

ow

er


0.0

0.2

0.4

0.6

0.8

1.0

1.2

1.4

1.6

0 200 400 600 800 1000 1200

Rela

tive L

um

inous F

lux


0.0

0.2

0.4

0.6

0.8

1.0

1.2

1.4

1.6

0 200 400 600 800 1000 1200

Rela

tive L

um

inous F

lux


8

Forward Current Characteristics, TJ = 25°C 2. Forward Current vs. Normalized Relative Luminous Flux

GreenRed

WhiteBlue




Taiwan (R.O.C.)

Tel ：+886-3-461-8618

Fax ：+886-3-461-8677


-0.02

-0.01

0.00

0.01

0.02

0.03

0.04

300 400 500 600 700 800 900 1000 1100

∆x,

∆y


-2.0

-1.0

0.0

1.0

2.0

3.0

4.0

300 400 500 600 700 800 900 1000 1100

∆λ

D(n

m)


Red

Green

Blue

∆x

∆y

9

Forward Current Characteristics, TJ = 25°C 3. Forward Current vs. Dominant Wavelength Shift

4. Forward Current vs. Chromaticity Coordinate Shift




Taiwan (R.O.C.)

Tel ：+886-3-461-8618

Fax ：+886-3-461-8677


80

84

88

92

96

100

104

108

20 40 60 80 100

Rela

tive F

orw

ard

Voltage (

%)

Junction Temperature, TJ (℃)

0

20

40

60

80

100

120

140

20 40 60 80 100

Rela

tive L

ight

Outp

ut

(%)


10

Junction Temperature Relative Characteristics1. Junction Temperature vs. Relative Light Output at 700mA

Red

Green

Blue

White

2. Junction Temperature vs. Relative Forward Voltage at 700mA

Red

Green

Blue

White




Taiwan (R.O.C.)

Tel ：+886-3-461-8618

Fax ：+886-3-461-8677


-0.03

-0.02

-0.01

0.00

0.01

0.02

0.03

20 40 60 80 100

∆x,

∆y


-4

-2

0

2

4

6

8

10

20 40 60 80 100

∆λ

D(n

m)


11

Junction Temperature Relative Characteristics3. Junction Temperature vs. Dominant Wavelength Shift at 700mA

Red

Green

Blue

∆x

∆y

4. Junction Temperature vs. Chromaticity Coordinate Shift at 700mA




Taiwan (R.O.C.)

Tel ：+886-3-461-8618

Fax ：+886-3-461-8677


0

10

20

30

40

50

60

70

80

90

100

-100 -80 -60 -40 -20 0 20 40 60 80 100

Rela

tive I

nte

nsity

(%)

Angular Displacement (Degrees)

12

Typical Representative Spatial Radiation PatternLambertian Radiation Pattern




Taiwan (R.O.C.)

Tel ：+886-3-461-8618

Fax ：+886-3-461-8677


Notes for handling of glass lens LEDs

● Please do not use a force of over 0.3kgf impact or pressure on the glass lens,

otherwise it will cause a catastrophic failure.

● Avoid touching the glass lens and the optical area of the COB Array especially by sharp tools

such as Tweezers

● Avoid touching the glass lens especially by sharp tools such as Tweezers.

● Avoid leaving fingerprints on the glass lens.

● Please store the LEDs away from dusty areas or seal the product against dust.

● Please do not mold over the glass lens with another resin. (epoxy, urethane, etc)

13

Recommended Soldering Condition● Please use lead free and “no clean ” solders.

● Soldering shall be implemented using a soldering tip at a temperature lower than 350 ℃, and shall

be finished within 3.5 seconds for each pad.

● During the soldering process, put the LEDs on materials whose conductivity is poor enough not to

radiate heat of soldering.

● Properly solder tin wires before soldering them to LEDs.

● Avoid touching the glass lens with the soldering iron.

● Please prevent flux from touching to the glass lens.

● Please solder evenly on each pad.

● Contacts number of a soldering tip should be within twice for each pad.

● Next process of soldering should be carried out after the LEDs have return to ambient temperature.

*ProLight cannot guarantee if usage exceeds these recommended conditions.

Please use it after sufficient verification is carried out on your own risk if absolutely necessary.

Precaution for Use● The modules light output are intense enough to cause injury to human eyes if viewed directly.

Precautions must be taken to avoid looking directly at the modules with unprotected eyes.

● The modules are sensitive to electrostatic discharge. Appropriate ESD protection measures

must be taken when working with the modules. Non-compliance with ESD protection

measures may lead to damage or destruction of the product.

● Chemical solvents or cleaning agents must not be used to clean the modules.

Mechanical stress on the Emitters must be avoided. It is best to use a soft brush, damp

cloth or low-pressure compressed air.

● The products should be stored away from direct light in dry location.

● The appearance, specifications and flux bin of the product may be modified for improvement

without notice. Please refer to the below website for the latest datasheets.


Handling of Glass Lens LEDs


Documents

ProLight PUMH-60FTL-N74N 60W COB Light-Engine LEDs Version: 1 · 2020-03-27 · We Provide the Light to the world No. 89, Xiyuan Rd., Zhongli City, Taoyuan County 320, Taiwan (R.O.C.)