Protect any surface with a nano layer · SIO9 H2 Textile Protector Coating MSDS Safety data PP-SIO9 H2 N (1-2)(2-2) HOW TO USE: NANO-CERAMIC® SIO9 These products can be stored for

SIO6

SIO9

Glass / Porcelain

Textile / Leather

SIO7

SI11

Metal / Aluminium

Stone / Concrete

SIO8Wood / LVL

Industrial Coatings

Protect any surface with a nano layer

NANO-CERAMIC® www.nano-ceramic.com

02

Glass / PorcelainProtector Serie

SIO6Type NR : SIO61000Consumption : circa 2ml/m2Used for : dirt barrier on glass (normal or sand blasted)Application field : airports,officebuildings,hotelsand private housing

SIO6 glass protection coating bonds molecular andpermanent onto the glass surface.

• It’s much easier and quicker to clean and the adhesion of dirt is reduced drastically.

• Bacteria get less chance to survive, and hygiene goes to a higher level.

• This coating has an outstanding hydrophobic effect, glass stays cleaner for longer.

• On facade buildings cleaning intervals and the form of water spots will be greatly reduced.

Will last for circa 5 year on glass facades.

unbreakablebottles

Coating

SI06 100 ml / 1 Litre

Prepare and Clean

• Scrub 250 ml / 1 Litre

• Steril 250 ml / 1 Litre

• Shampoo 1 Litre

Applicators

• Apply pad

• Scrub pad

• Micro towel

cleanerfor longer

easy toclean


03

Type NR : SIO71000Consumption : circa 2ml/m2Used for : stainless steel and alumuniumApplication field : airports,officebuildings,hotels,restaurant and private housing (facades, kitchens and elevators)

SIO7 steel protection coating bonds molecular andpermanent onto the glass surface

• Fingerprints are less visible and can easily be removed with a dry microtowel.

• Bacteria get less chance to survive, and hygiene goes to a higher level.

• This coating has an outstanding hydrophobic effect, steel outside stays cleaner for longer.

• On facade buildings cleaning intervals, and the form of water spots, will be greatly reduced.

• Has a hardness of H9 (Anti Scratch) and protect against corrosion.

Will last for circa 5 year on metal facades.

Steel / AluminiumProtector Serie

SIO7

H9hardness

antifingerprint

food hygene

Coating


Prepare and Clean



• Shampoo 1 Litre

Applicators

• Apply pad

• Scrub pad

• Micro towel


04

Type NR: SIO81000Description: H2 hardness wood coating 1 LitreUsed for: teak and LVL engineerd wood (varnished)Notice: canbeusedforofficebuildings,hotel, private housing and furniture

The SIO8 wood protector coating bonds molecular andpermanent onto the wood surface or varnish.

• Algae and Bacteria get less chance to survive, and hygiene goes to a higher level.

• This coating has an outstanding hydrophobic effect, wood outside stays clenaer dryer for longer.

• On LVL facade buildings cleaning intervals, and the form of water spots, will be greatly reduced.

Will last for circa 3 year on LVL facades.

Wood / LVLProtector Serie

SIO8

unbreakablebottles

cleanerfor longer

easy toclean

Coating


Prepare and Clean



• Shampoo 1 Litre

Applicators

• Apply pad

• Scrub pad

• Micro towel

Type NR: SIO91000Description: H2flexibletextilefibreselant1LitreUsed for: leathers and textiles, carpets and furnitureNotice: canbeusedforofficebuildings,hoteland private housing

SIO9 Textile ProtectorThesealantwillbondbreathableandflexibleontothetextilefibersorleathersurfaces.

• Water and dirt get less change to penetrate, and hygiene goes to a higher level.

• This coating has an outstanding hydrophobic effect, textile and leathers stays cleaner and dryer for longer.

• On Carpets in buildings cleaning intervals, or restoration will be greatly reduced.

Willlastforcirca1year(dependingonthetraffic).


05

Textile / Leather / CarpetProtector Serie

SIO9Coating

SI09 1 Litre

Prepare and Clean

• Shampoo 1 Litre

Applicators

• Hand sprayer

breathable&flexible

cleanerfor longer

easy toclean

Type NR: SI110850 + SI110150Description: H9 stone coatingUsed for: stone, mineral stone, concreteNotice: canbeusedforinfrastructure,officebuildings hotel and private housing

SI11 stone concrete coating bonds molecular andpermanent onto the stone surface.

• Water and dirt get less change to penetrate, and graffitiiseasytoremove.

• This coating has an outstanding hydrophobic effect.

• On walls or tunnels cleaning intervals, or restoration from it will be greatly reduced.

Will last for circa 5 year (depending on circumstances).


06

Stone / Concrete Protector Serie

SI112 - Component

Coating

SI11 150 ml / 850 ml

Prepare and Clean

• Shampoo 1 Litre

Applicators

• Hand sprayer

• Paint sprayer

breathable&flexible

cleanerfor longer

easy toclean


07

HOW TO USE:NANO-CERAMIC® SIO6 SIO7 SIO8

CLEANINGMake clean the surfaces thoroughly until the complete surface is absolutely clean. If necesarry use our Shampoo and Scrub Cleaner. And use our Steril Pre-treatment Cleaner as a last step to make sure that all Scrub cleaner residue or all contamination is removed so that the coating can bound properly onto a clean surface. Make sure that the surface is completely dry before application!

APPLICATIONShake the bottles very well before use! Take a soft cotton pad and pour a few drops of the coating on it (start with small amounts, there is only very little product necessary). Moisten all the Glass Steel or Woodpanelsevenlywithfirmpressureonthepad.Whenappliedcorrectly you can now see a light grey veil on the surfaces. Polish away the grey veils after all solvents are vaporized, use a clean (microfiber)cloth.

After the surfaces are polished do not touch them and protect them from humidity. After the drying polish windows and steel surfaces again with a lint freeclothtoremovethelastgreyveil‐residue.

CURING PERIODDirectly after polishing the coatings are dry and resistant against touching. At normal ambient temperature the coatings are completely cured afterapproximately 12 hours.

AFTERCAREwe strongly recommend to use our re-activating shampoo, it reactivated th nano layer and cleans at the same time, without leavingafilmof polymers or colouring chemicals behind as we made this shampoo on a very pure basis. This shampoo is very safe for our environment as well.

WarrantySince application and processing lie outside our purview, no manufacturer liability shall be derived from the information provided herein.SIO6 H2 Glass Protector Coating MSDS Safety data PP-SIO6 H2 N (1-2)(2-2)SIO7 H9 Steel Protector Coating MSDS Safety data PP-SIO7 H2 N (1-2)(2-2)SIO6 H2 Wood Protector Coating MSDS Safety data PP-SIO8 H2 N (1-2)(2-2)

These products can be stored for up to 24 months (in a dry, temperature stable dark environment)

Consumption:Glass: appr. 2ml/m2 Steel 2ml/m2 Wood 4ml/m2Processing temperature: 5‐30°C‐Avoiddirectsunlightand/or high air humidity.

IMPORTANT:Before you use a NANO-CERAMIC® product please make sure you wear suitable protection gear we always recommend to use Latex or Nitril gloves to make sure your hands are protected from any possible damage to your skin.

Applicators:


08

CLEANINGMake clean the surfaces thoroughly until the complete surface is absolutely clean. If necesarry use our Pure Shampoo. Make sure that all contamination is removed so that the sealant can bound properly onto a clean surface. Make sure that the surface is completely dry before application!

APPLICATIONShake the bottles very well before use! and spray until the surface is saturated.

CURING PERIODDirectly after polishing the sealing is dry it is resistant against touching. At normal ambient temperature the coatings are completely cured after approximately 24 hours.

AFTERCAREwe strongly recommend to use our re-activating shampoo, it reactivated th nano layer and cleans at the same time, without leavingafilmofpolymersorcolouringchemicalsbehindaswemade this shampoo on a very pure basis. This shampoo is very safe for our environment as well.

WarrantySince application and processing lie outside our purview, no manufacturer liability shall be derived from the information provided herein.SIO9 H2 Textile Protector Coating MSDS Safety data PP-SIO9 H2 N (1-2)(2-2)

HOW TO USE:NANO-CERAMIC® SIO9


Consumption:Textile: appr. 65ml/m2, Leather 40ml/m2Processing temperature: 5‐30°C‐Avoiddirectsunlightand/or high air humidity.


Applicators:


09

CLEANINGMake clean the surfaces thoroughly until the complete surface is absolutely clean. If necessary use our Pure Shampoo. Make sure that all contamination is removed so that the coating can bound properly onto a clean surface. Make sure that the surface is completely dry before application!

APPLICATIONShake the bottles very well before use! Make sure the surface is free from any contamination and dirt.

ATTENTION !This is a 2-Component Nano Coating:Mix SI11 A75% with SI11 B25%Carefully poor the mixed content into a sprayer bottle or preferable a paint sprayer, noozle 0,7mm,

SPRAYSpray till the surface is saturated

DRYLet the surface dry for 24 hoursMixtures can not be stored longer the 3 hoursSurface can be cleaned with a pressure washer at 80-120 barSI11 H9 Stone-Concrete Protector Coating MSDS Safety data PP-SI11 H9 N (1-2)(2-2)

HOW TO USE:NANO-CERAMIC® SI11 2 - Component


Consumption:Stone: appr. 50ml/m2Processing temperature: 5‐30°C‐Avoiddirectsunlightand/or high air humidity.


Applicators:


PT Nano Ceramic Indonesia,JI Setia Budi 172, Tanjung Rejo 20122 Medan, Indonesia

[email protected]

Distribution

Projects

Parama M+62 (0) 813 1772 4688

Head Office

Documents

Protect any surface with a nano layer · SIO9 H2 Textile Protector Coating MSDS Safety data PP-SIO9 H2 N (1-2)(2-2) HOW TO USE: NANO-CERAMIC® SIO9 These products can be stored for