Proven solutions you cantrustmultimedia.3m.com/mws/media/601849O/3m-espe-product... · 2012-02-06 · independent, objective information on the most recent innovations and trends

Dental Products Catalogue 2009 - 2010

you cantrustProven solutionsAvailable for the Middle East & Africa regionsAvailable for the Middle E

1

You + 3M ESPE =A formula for success

2

You + 3M ESPE =A formula for success

On this we will never compromise: when you choose 3M ESPE, you will get quality that goes beyond “product quality.”

This commitment begins with 3M ESPE people, both those you see and those you don’t. We take great care to hire highly trained employees who recognize the power of collaboration with colleagues and customers. These people are then given continuous education in the real world, so their efforts in developing, producing and introducing new products help you achieve a higher level of comfort, safety and quality in your work.

In addition, stringent quality controls are in place throughout our product development process, from determining the necessity and value of a proposed product, to acquisition of raw materials, selection of suppliers, production and, ultimately, delivery of that product to you.

The term quality may be overused. But its importance at 3M ESPE cannot be underestimated. As important and fundamental as our uncompromising approach to quality is, at 3M ESPE it is only one aspect of earning and keeping your trust.

An Organization-wide Commitment to Quality

Quality in writing. 3M ESPE Certifications:

Since 2003 ISO 14001 – Environmental Management System

Since 1999 OHRIS – “Occupational Health and Risk Management System”

Since 1994 ISO 9001 – Quality Management System – quality assurance in the fields

of design, development, production, assembly and maintenance, and EU

Directive on medical products

3

For more than a century, people around the world have looked to 3M for new products and ideas that solve problems and make their lives easier and better. Today, in fact, more than 6,500 3M research and development employees are working with 45 technology platforms to expand on the company’s track record as a global source of innovation. Scientists from all around the company are able to draw on these corporate technologies as springboards to meet customers needs and solve their problems.

As can only happen here, 3M technologies come together in countless combinations that lead to innovative, new products. Products that are simple to use, yet complex enough to help make the world healthier, safer and better.

3M ESPE is no exception. Combining the nely tuned 3M product development engine with ongoing insight from dental practitioners around the world has enabled us to bring a number of rsts to dentistry. Among them, the rst-ever tooth-colored restorative material, the rst self-adhesive resin cement and the rst automated mixing of impression materials and cements. Advancements that truly have made a difference.

And there’s more to come. As you continually seek to improve patient care, you can expect 3M ESPE to be steadfast in its commitment to help you pursue that goal.

Ingenious Thinking That Produces Practical Solutions

Knowledge You Can Use, Information You Can Trust Near constant advances are being made in the eld of dental materials and techniques. To help you stay ahead of the changes, 3M ESPE developed Espertise™ brand educational programs that include the latest news on products, and dental industry trends and techniques.

Espertise programs allow for a two-way exchange of knowledge and information between clinical researchers, material scientists and you, the chairside professional. Our goal is to provide independent, objective information on the most recent innovations and trends in dentistry, the latest material developments and scienti c research results. Equally critical, it’s a forum for sharing how things work in your everyday world. Experienced specialists esteemed for their pro ciency in theory and practice are regularly invited to solicit insights on the business from both dentists and 3M ESPE people.

In simple terms, Espertise programs and materials help you learn from experts, and help 3M ESPE learn from you. We both bene t from the experience.

Together for a successful future, sincerely

Dr. Rodrique Rizk Business Development Manager3M ESPE Middle East and Afica

4

Adper™ Easy OneSelf-Etch Adhesive

Trusted adhesive technology now super easy. One component. One coat. One speed-fast!

For further information, see page 30

Elipar™ S10 LED Curing Light

For polymerization of light-curing dental materials.Like no other … inside and out.


Filtek™ P90Low Shrink Posterior Restorative

The first direct posterior composite to achieveless than 1% shrinkage.

For further information, see pages 40–41

5

ProtempPP pmpemoteo m ™ 4444Temporization MaterialatteTemporization Materia

Protemp™ CrownTemporization Material

Introducing a new era in temporization:the worlds first preformed and malleable

temporary crown.

Available soon in MEA Region


Express™ XTVPS Impression Materials

A new synthesis of balance for accuracy.w synthesis of balance for accExpressExpre ™ XT offers an excellent potential for for

highly accurate impressions and g y p ns ahibetter fitting restorations!ti

For further information, see page 66-67f f p gurther information, see page 66-67For nfo

The innovative advancement of aThe innosuccessful product.

ate toughness – outstanding beauty.

or further information, see page 84

TT

ltima

Fo

Ul

Pentamix™ 3Automatic Mixing Unit

For automatic mixing and dispensing of awide range of Penta™ impression materials

from 3M ESPE – faster than any otherautomatic mixing unit!

For further information, see page 56-57

Lava™ Chairside Oral Scanner C.O.S. Digital Impression System

Delivering precise-fitting restorations, providingecise-fitting restorations, propatients with a comfortable, high-tech experience and ti nts wwith mfortab high exp ie ce apatients with a comfortaablemfortable, high-tech experienceliminating several steps in both the dental practice and ps in both the dental practice ractprprrlab are just some of the benefits when working with are jjust somme off thhe are j enefits when workinrkiing wingki wiwith withthe LavaLavaaLav ™™ Chairside Oral Scanner C.O.S. – 3M ESPE’s Chairside OOr canner C.O.S. – 3M ESPE’s ’sE sEE.S. –– 3M– 3MMM ESSPErevolutionary system for making digital impressions. king digital im ons.ons.siol iimpressl i

Enhanced precision and improved productivity from the ion and improved produecis uctimproved productivity from thvery beginning: the Lavavery beginning: the Lava™™ C.O.S. helps both dentists C.O.S. helps both dentistand technicians to solve the challenges of the traditional nicians to solve the challenges of the trimpression process using trays and impression materials. impression process using trays and imprWith the Lava™ C.O.S. featuring unique 3D-in-Motion C.O.S. featutechnology, dentists can capture and simultaneously view ure and simultaneously viewhcontinuous 3D video images of the patient’s dentitioncreating highly accurate digital impressions. From there,m thdata is sent to an authorised lab where the final restoration estois being created. Due to the high precision of the initialimpression, the Lava C.O.S. can increase productivity byreducing seating times and remakes.

Whether using a traditional process, like PFM, or sophisticated CAD/CAM processes, including Lava™

Precision Solutions, the Lava C.O.S. is the perfect entrypoint to the digital workflow by providing a precise digitala precise digitalimpression.

The Lava Chairside Oral Scanner C.O.S. is now available in selected markets. Please contact your local3M ESPE organization for detailed information.

7

ContentDirect RestorationLiners 14-15

Glass Ionomer Restoratives 16-24

Etching and Bonding 29-35

Composite Restoratives 36-49

Indirect RestorationPolyetherPrecision Impression Materials

56-62

VPSPrecision Impression Materials

66-73

Preliminary Impressions and Bite Registration

76-80

Temporization 84-90

Cementation 94-107

Crowns and Bridges 110-114

MiscellaneousLocal Anesthetics 118-123

Devices, Accessories and Spare Parts

126-129

Infection Control 132-134

IndexAlphabetical Overview of all Products

136-137

8

Final Restoration

PolishingSof-Lex™

Added Value for your PatientsFind the Right Solution for each Indication

FillingsFiltek™ P90

Filtek™ Z 350 UniversalFiltek™ Z 350 Flowable

Filtek™

™ Z 250

Valux Plus

Light CuringElipar™ S10


9

CariesRemoval

Anamnesis Patient findings

(X-Ray, Periodontal examination)

Local AnestheticsUbistesin™

BaseKetac™ BondVitrebond™

AdhesionAdper™ Easy OneAdper™ SE Plus

Adper™ Prompt™ L-Pop™

Adper™ Single Bond 2Adper™ Scotchbond™ Multi-Purpose

10

Filling Materials from 3M ESPE

Indications Class I Class II Class III Class IV Class VBase Material/Liner Fissure Sealant

COMPOSITE RESTORATIVE

Filtek™ Z350Universal Composite

Filtek™ Z350Flowable Composite

Filtek™ Z250Universal Composite

Valux™ PlusUniversal Composite

Filtek™ P90Low-Shrink Posterior Composite

Filtek™ P60High Viscosity Composite

Clinpro™ SealantComposite Fissure Sealant

COMPOMERE

F2000Compomere Restorative

GLASS IONOMER RESTORATIVES

Ketac™ Molar Quick Aplicap™

Ketac™ Molar Aplicap™

Ketac™ Molar EasymixHigh Viscosity Glass Ionomer

Ketac™ Fil PlusAplicap™

Handmix VersionGlass Ionomer

Ketac™ SilverAplicap™/Maxicap™

Handmix VersionSilver Reinforced Glass Ionomer

Ketac™ BondAplicap™

Handmix VersionGlass Ionomer

RESIN MODIFIED GLASS IONOMER RESTORATIVES

Ketac N100™

Light-Curing Nano-Ionomer

Photac™ Fil Quick Aplicap™

Resin Modified Glass Ionomer

Vitremer™


Vitrebond™


TEMPORARY RESTORATIVES

Cavit™

Temporary Filling Material

MISCELLANEOUS

Ketac™ ConditionerPre-treatment for Glass Ionomer

Vitremer™ PrimerPre-treatment for Vitremer/Vitrebond

Ketac™ GlazeLight Curing Glaze

Finishing GlossGlaze for Vitremer/Vitrebond

11

small non-occlusal areas semi-permanentART (atraumatic restorative treatment)

repair of resin and acrylictemporary materials(e.g. Protemp™ 4)

Primary Teeth Fillings

Temporary Restoration

CoreBuild up

Enamel-/Dentin-Pretreatment Pulp Protection

Root Canal Filling Material

Indirect Inlays,Onlays, Veneers

12

Glass Ionomer Restoratives

Gla

ss Io

nom

er

Res

tora

tives

Line

rs

Etch

ing

and

Bon

ding

Com

posi

te R

esto

rativ

es

VPS

Prec

isio

n Im

pres

sion

M

ater

ials

Poly

ethe

rPr

ecis

ion

Impr

essi

on

Mat

eria

ls

Prel

imin

ary

Impr

essi

ons

and

Bite

Reg

istr

atio

n

13

Composite Restoratives

Filtek™ P90Filtek™ Z350 Universal RestorativeFiltek™ Z350 Flowable RestorativeFiltek™ Z250Filtek™ P60Valux™ Plus

F2000 CompomerConcise™ CompositeClinpro™ Sealant

Sof-Lex™ Finishing and Polishing System

Pages 36-49

Related ProductsElipar™ S10

Glass Ionomer Restoratives


Ketac™ Molar EasymixKetac™ Molar Quick Aplicap™

Ketac™ Fil PlusKetac™ N100


Vitremer™

Ketac™ Silver

Accessories for Glass Ionomers

Pages 16-24

Related ProductsRotoMix™

CapMix™

Liners

Ketac™ BondVitrebond™

Pages 14-15

Related ProductsRotoMix™

CapMix™

Glass Ionomers Accessories

Tem

poriz

atio

n

Infe

ctio

n C

ontr

ol

Dev

ices

, Acc

esso

ries

and

Spar

e Pa

rts

Loca

l Ane

sthe

tics

Cem

enta

tion

Cro

wns

and

Brid

ges

NEWNEW

14

Not all products of this catalogue are available in all countries.

Ketac™ Bond Glass Ionomer Base Material

Radiopaque glass ionomer base material in handmix version or in the Aplicap™ System from 3M ESPE.

Indications• Base material for sandwich technique• Cavity lining• Extended fissure sealing

Product Benefits• High radiopacity• High fluoride release• Our Aplicap System offers simple handling, constant

working properties and reliable quality

Instructions for Use• Apply Ketac Conditioner to the surfaces and allow

10 sec. to workHandmix:• Before dispensing, loosen the powder by shaking • Reseal both bottles immediately after use• A mixing ratio of 1 drop liquid to one spoon powder

is recommended. According to the application area, powder can be introduced gradually until the desired consistency is reached

• Mixing on a cooled glass slab extends the working timeCapsule:• During activating, push activator lever down • Keep lever in this position for at least 2 sec.• After mixing apply directly with the applier• Apply Ketac Glaze to all free surfaces and light-cure

for 10 sec.• Working time (including mixing):

Ketac Bond 2:00 min.Ketac Bond Aplicap 1:45 min.

• Setting time (from begin of mix):Ketac Bond 4:00 min.Ketac Bond Aplicap 4:00 min.

Item No. Product Information

37390 Double Pack Ketac Bond Handmix2 Powder 10 g each, Shade yellow, 1 Liquid 12 ml

Refills Ketac Bond Handmix

37330 1 Powder 10 g, Shade yellow

37320 1 Liquid 12 ml

37350 Refill Ketac Bond Aplicap50 Capsules, Shade yellow

Refill Ketac™ Bond Aplicap

Related productsfrom 3M ESPE:

RotoMix™, CapMix™, pg. 128Aplicap™ Applier/Activator, pg. 24Ketac™ Conditioner/Glaze, pg. 24

Filtek™ Z350, pg. 36-37Filtek™ Z250, pg. 38Valux Plus, pg. 39

15


Vitrebond™

Light-Curing Glass Ionomer Liner/Base

Indications• Cavity liner under composite, amalgam, metal and

ceramic restorations

Product Benefits• Long-term fluoride release• Bonds extremely well to tooth structure• High biocompatibility• Radiopaque

Instructions for Use• Before dispensing, loosen the powder by shaking • Reseal both bottles immediately after use• Variable mixing ratio for optimum consistency• One scoop powder and one drope liquid• Light cure for 30 secs


7510 Introductory Kit1 Powder 9 g, 1 Liquid 5.5 ml, 3 Mixing Pads

Refills

7512 P 1 Powder 9 g

7512 L 1 Liquid 5.5 ml


Elipar™ S10, pg. 126Filtek™ Z350, pg. 36-37Filtek™ Z250, pg. 38

Valux Plus, pg. 39Vitremer™ Primer/Finishing Gloss, pg. 22

Introductory Kit Vitrebond™

16



Glass Ionomer Restorative Material

Highly viscous glass ionomer for posterior restorations in the new easymix version or in the Aplicap™ System from 3M ESPE.

Indications• Permanent class I restorations in non-occlusal areas• Semipermanent posterior restorations• Primary teeth fillings• Core build-ups prior crown placement• Base material for composite fillings• Class V restorations• Fissure sealings

Product Benefits• High compressive strength and surface hardness• Minimal abrasion• Packable• Fluoride release• Our Aplicap System offers simple handling, constant

working properties and reliable quality• 9 years clinical experience


10 sec. to workEasymix:• Before dispensing, loosen the powder by shaking • Reseal both bottles immediately after use• Mix the powder into the liquid in 2 portionsCapsule:• During activating, push activator lever down • Keep lever in this position for at least 2 sec.• After mixing apply directly with the applier• Apply Ketac Glaze to all free surfaces and light-cure

for 10 sec.• Working time (incl. mixing):

Ketac Molar Aplicap 2:00 min.• Setting time (from begin of mix):

Ketac Molar Aplicap 4:30 min.

Introductory Kit Ketac™ Molar Aplicap™


56400 Introductory Kit Ketac Molar Aplicap50 Capsules assorted in the Shades A1, A3, A4, DYO, 1 Aplicap Activator, 1 Aplicap Applier, 1 Ketac Conditioner, 1 Ketac Glaze, 1 Mixing Pad, Accessories

Refills Ketac Molar Aplicap

56410 50 Capsules assorted in the Shades A1, A3, A4, DYO

56430 50 Capsules, Shade A1



56450 20 Capsules, Shade DYO


RotoMix™, CapMix™, pg. 128Aplicap™ Applier/Activator, pg. 24

Ketac™ Conditioner/Glaze, pg. 24

17


Ketac™ Molar Quick Aplicap™

Glass Ionomer Restorative Material

Highly viscous glass ionomer for fast setting posterior restorations in the Aplicap™ System from 3M ESPE.

Indications• Primary teeth fillings• Permanent class I restorations in non-occlusal areas• Semipermanent posterior restorations• Extended fissure sealing• Class V restorations• Core build-ups prior crown placement• Base material for composite fillings

Product Benefits• High compressive strength and surface hardness • Short mixing time• Short setting time• Still enough working time• Fluoride release • Long nozzle of the capsule for a direct application• Our Aplicap System offers simple handling, constant



10 sec. to work• During activating, push activator lever down • Keep lever in this position for at least 2 sec.• After mixing apply directly with the applier• Apply Ketac Glaze to all free surfaces and light-cure


Ketac Molar Quick Aplicap 1:40 min.• Setting time (from begin of mix):

Ketac Molar Quick Aplicap 3:30 min.


56368 Introductory Kit50 Capsules assorted in the Shades A1, A2, A3, A4, B2, 1 Aplicap Activator, 1 Aplicap Applier, 1 Ketac Conditioner, 1 Ketac Glaze, 1 Mixing Pad

Refills

56369 50 Capsules assorted in the Shades A1, A2, A3, A4, B2





56365 50 Capsules, Shade B2




Introductory Kit Ketac™ Molar Quick Aplicap™




* THE DENTAL ADVISOR (18-04/2001)

18



RelyX ARC, pg. 100RelyX Temp E, pg. 107

Ketac™ Molar Easymix Glass Ionomer Restorative Material

Highly viscous glass ionomer for posterior restorations in the new easymix version or in the Aplicap™ System from 3M ESPE.

Indications• Permanent class I restorations in non-occlusal areas• Semipermanent posterior restorations• Primary teeth fillings• Core build-ups prior crown placement• Base material for composite fillings• Class V restorations• Fissure sealings

Product Benefits• High compressive strength and surface hardness• Minimal abrasion• Packable• Fluoride release• Our Aplicap System offers simple handling, constant

working properties and reliable quality• 9 years clinical experience


10 sec. to workEasymix:• Before dispensing, loosen the powder by shaking • Reseal both bottles immediately after use• Mix the powder into the liquid in 2 portionsCapsule:• During activating, push activator lever down • Keep lever in this position for at least 2 sec.• After mixing apply directly with the applier• Apply Ketac Glaze to all free surfaces and light-cure


Ketac Molar Easymix 3:00 min.

• Setting time (from begin of mix):Ketac Molar Easymix 5:00 min.

Introductory Kit Ketac™ Molar Easymix


56632 Starter Kit Ketac Molar Easymix1 Powder 12.5 g, Shade A3, 1 Liquid 10 g, 1 Ketac Conditioner, 1 Ketac Glaze, 1 Mixing Pad, Accessories

56633 Starter Kit Ketac Molar for M.I. incl. A.R.T.1 Powder 15 g, Shade A3, 1 Liquid 10 g, Accessories

Refills Ketac Molar Easymix

56625 1 Powder 12.5 g, Shade A3

56628 1 Liquid 10 g

19


Ketac™ Fil Plus Glass Ionomer Filling Material

Glass ionomer restorative in handmix version or in the Aplicap™ System from 3M ESPE.

Indications• Permanent class III and V restorations • Permanent class I small restorations• Primary teeth fillings• Fissure sealing• Fillings of cervical erosions• Fillings prior to crown preparation

Product Benefits• 8 shades to achieve natural aesthetics• Expansion coefficient similar to tooth structure• Radiopaque• High fluoride release• Our Aplicap System offers simple handling, constant



10 sec. to workHandmix:• Before dispensing loosen the powder by shaking • Reseal both bottles immediately after use• Mix powder into the liquid in 2 portions at the mostCapsule:• During activating, push activator lever down • Keep lever in this position for at least 2 sec.• After mixing apply directly with the applier• Apply Ketac Glaze to all free surfaces and light-cure


Ketac Fil Plus 2:00 min.Ketac Fil Plus Aplicap 1:30 min.

• Setting time (from begin of mix): Ketac Fil Plus 7:00 min.Ketac Fil Plus Aplicap 7:00 min.

Introductory Kit Ketac™ Fil Plus Aplicap™


Refills Ketac Fil Plus Handmix

55270 1 Powder 10 g, Shade A1 light

55280 1 Powder 10 g, Shade A2 light-yellow

55290 1 Powder 10 g, Shade A3 yellow

55300 1 Powder 10 g, Shade A3.5 brown

55310 1 Powder 10 g, Shade A4 yellow-brown

55330 1 Powder 10 g, Shade C3 grey-brown

55260 1 Liquid 10 g

55000 Introductory Kit Ketac Fil Plus Aplicap50 Capsules assorted in the Shades A2, A3, A3.5, A4, 1 Aplicap Activator, 1 Aplicap Applier, 1 Ketac Conditioner, 1 Ketac Glaze, 1 Mixing Pad, Accessories

Refills Ketac Fil Plus Aplicap

55010 50 Capsules, assorted in the Shades A2, A3, A3.5, A4

55020 50 Capsules, Shade A1 light

55030 50 Capsules, Shade A2 light-yellow

55040 50 Capsules, Shade A3 yellow

55050 50 Capsules, Shade A3.5 brown

55060 50 Capsules, Shade A4 yellow-brown

55070 50 Capsules, Shade C2 grey

55080 50 Capsules, Shade C3 grey-brown

55090 50 Capsules, Shade DGO dark-grey

55100 Giant Pack Ketac Fil Plus Aplicap300 Capsules, Shade A3


55291 Starter Kit Ketac Fil Plus Handmix1 Powder 10 g, Shade A3, 1 Liquid 10 g, 1 Ketac Glaze, 1 Ketac Conditioner, Mixing Pad

55250 Introductory Kit Ketac Fil Plus Handmix4 Powders assorted in the Shades A2, A3, A3.5, A4, 2 Liquids 10 g each, 1 Ketac Conditioner, 1 Ketac Glaze, 1 Mixing Pad, Accessories




20


Ketac™ N100 Light-Curing Nano-Ionomer-Restorative


3527I Introductory Kit1 Clicker Dispenser 12 g Shade A2, 1 Clicker Dispenser 12 g Shade A3; Primer (6.5 ml); 50 Delivery Tips with pistons; Mixing Pad; 60 Fiber Tips; 1 Applicator Handle; 48 Disposable Mixing Wells; Shade Guide; Instructions; Technique Guide

3527TK Restorative Trial Kit1 Clicker Dispenser 12 g Shade A3; Primer (6.5 ml);10 Delivery Tips with pistons; Instructions; Technique Guide

Refills

3527A1 1 Clicker Dispenser 12 g, Shade A1



3527A3.5 1 Clicker Dispenser 12 g, Shade A3.5


3527B2 1 Clicker Dispenser 12 g, Shade B2

3527C2 1 Clicker Dispenser 12 g, Shade C2

3527Blue 1 Clicker Dispenser 12 g, Shade Blue

3527P 1 Vial Primer 6.5 ml

Introductory Kit Ketac™ N100


Elipar™ S10, page 126

The first paste/paste RMGI restorative based on bonded nanofiller technology in the Clicker™ Dispenser from3M ESPE.

Indications• Primary tooth restorations• Small Class I restorations• Class III and V restorations• Transitional restorations• Sandwich restorations• Core build-ups

Product Benefits• Faster, easier mixing and dispensing – with accurate,

reproducible dosing from the award-winning Clicker™

Dispenser from 3M ESPE• The first paste/paste RMGI restorative based on bonded

nanofiller technology• Esthetic glass ionomer restorative• High fluoride release• Improved wear resistance

Instructions for Use• Apply Ketac N100 Primer for 15 sec. to the preparation

before restoring tooth with Ketac N100 restorative• Dry the primer for 15 sec. and light cure the primer

surfaces for 10 sec.• While dispensing hold the clicker down for 2 secs. after each click• Application in layers max. 2 mm• Mixing time:

Ketac N100 (minimum) 20 secs.• Working time (including mixing):

Ketac N100 3:00 min.• Light-curing:

Shade A1, A2, A3, B2, C2, Blue 20 secs.Shade A3.5, A4 30 secs.

NEWNEW

* THE DENTAL ADVISOR (2008)

21



Light-Curing Glass Ionomer Restorative Material

Light-curing glass ionomer for anterior and posterior restorations in the Aplicap™ System from 3M ESPE.

Indications• Uncooperative patients• Primary teeth fillings• Fissure sealing• Permanent class III and V restorations• Permanent class I small restorations • Semi-permanent Class I and II restorations

Product Benefits• Versatile thanks to chemical and light curing• No conditioning required• No glaze necessary• 8 shades to achieve natural aesthetics• High fluoride release• Our Aplicap System offers simple handling, constant


Instructions for Use• During activating, push activator lever down • Keep lever in this position for at least 2 sec.• After mixing apply directly with the applier• Application in layers of 2.5mm• Working time (including mixing):

Photac Fil Quick Aplicap 2:00 min.• Light Curing:

Photac Fil Quick Aplicap 20 secs.

Introductory Kit Photac™ Fil Quick Aplicap™


61000 Introductory Kit50 Capsules assorted in the Shades A1, A2, A3, A3.5, B2, B3, C4, DBO, 1 Aplicap Activator, 1 Aplicap Applier

Refills

61090 50 Capsules in the Shades A1, A2, A3, A3.5, B2, B3, C4, DBO




61060 50 Capsules, Shade A3.5



61070 20 Capsules, Shade C4

61080 20 Capsules, Shade DBO



Elipar™ S10, pg. 126


22


Vitremer™

Core Build-up/Restorative

Glass ionomer core build-up and restorative material with Patented Triple Curing Technology.

Indications• Core build-ups prior crown placement• Filling undercuttings in preparation of crowns• Class I and II restorations in primary teeth• Permanent class III and V restorations• Restauration of root caries lesions• Cavity lining

Product Benefits• Patented triple curing technology: Light-curing,

chemical curing and additive glass ionomer setting reaction

• Low abrasion • High fluoride release

Instructions for Use• Before dispensing, loosen the powder by shaking • Reseal both bottles immediately after use• Working time (including mixing):

Vitremer 3:00 min.• Light Curing:

Vitremer 40 secs.

Introductory Kit Vitremer™


3303 i Introductory Kit6 Powders assorted in the Shades A3, A4, C2, C4, Paedo, Blue (5 g each), 1 Primer 6.5 ml, 2 Liquids 8 ml each, 1 Finishing Gloss 6.5 ml, 60 Single-Use Brushes, 50 Application Tips, 1 Mixing Pad (7.5 x 13 cm), 1 Mixing Well, 1 Vitremer Shade Guide, Accessories

3303 MP-A3

Mini Kit A31 Powder 5 g, Shade A3, 1 Liquid 2.5 ml, 1 Primer 2 ml,1 Finishing Gloss 2 ml, 10 Empty Capsules Spoon,1 Mixing Pad

3303MP-Paedo

Mini Kit Paedo1 Powder 5 g, Shade P (Paedo), 1 Liquid 2.5 ml, 1 Primer 2 ml, 1 Finishing Gloss 2 ml, 10 Empty Capsules Spoon, 1 Mixing Pad

3303MP-Blue

Mini Kit Blue1 Powder 5 g, Shade Blue (core build-ups), 1 Liquid 2.5 ml, 1 Primer 2 ml, 1 Finishing Gloss 2 ml, 10 Empty Capsules Spoon, 1 Mixing Pad

Refills

3303 A3 1 Powder 9 g, Shade A3, 1 Scoop

3303 A3.5 1 Powder 9 g, Shade A3.5, 1 Scoop

3303 A4 1 Powder 9 g, Shade A4, 1 Scoop

3303 B2 1 Powder 9 g, Shade B2, 1 Scoop

3303 B3 1 Powder 9 g, Shade B3, 1 Scoop

3303 C2 1 Powder 9 g, Shade C2, 1 Scoop

3303 C4 1 Powder 9 g, Shade C4, 1 Scoop

3303 Paedo 1 Powder 9 g, Shade Paedo (primary tooth restaurat.), 1 Scoop

3303 Blue 1 Powder 9 g, Shade Blue (core build-ups), 1 Scoop

3303 P 1 Primer 6.5 ml

3303 L 1 Liquid 8 ml

3303 FG 1 Finishing Gloss 6.5 ml



23


Ketac™ SilverSilver Reinforced Glass Ionomer Restorative Material

Silver reinforced glass ionomer with very good mechanical properties in handmix version, in the Aplicap™- or Maxicap™ System from 3M ESPE.

Indications• Core build-ups prior crown placement• Permanent class I and V restorations • Primary teeth fillings

Product Benefits• Good thermal and electrical insulating properties• Silver particles are sintered into the glass• Ketac Silver contains no amalgam• Our Aplicap/Maxicap System offers simple handling,

constant working properties and reliable quality• Especially the Maxicap is indicated for extended core

build ups and bigger cavities


10 sec. to workHandmix:• Before dispensing loosen the powder by shaking • Reseal both bootles immediately after use• Mix the powder into the liquid in 2 portions • Mixing on a cooled glass slab extends the working timeCapsule:• During activating, push activator lever down • Keep lever in this position for at least 2 sec.• After mixing apply directly with the applier• Apply Ketac Glaze to all free surfaces and light-cure


Ketac Silver 4:00 min.Ketac Silver Aplicap/Maxicap 2:00 min.

• Setting time (from begin of mix):Ketac Silver 7:00 min.Ketac Silver Aplicap/Maxicap 5:00 min.


37800 Introductory Kit Ketac Silver Handmix1 Powder 25g, 1 Liquid 12 ml, 1 Mixing Pad

Refills Ketac Silver Handmix

37810 1 Powder 25 g


37006 Introductory Kit Ketac Silver Aplicap50 Aplicap Capsules, 1 Aplicap Activator, 1 Aplicap Applier, 1 Ketac Conditioner, 1 Ketac Glaze

56203 Introductory Kit Ketac Silver Maxicap 50 Maxicap Capsule, 1 Maxicap Activator, 1 Maxicap Applier

Refills Ketac Silver Aplicap / Maxicap

37010 50 Aplicap Capsules

56210 50 Maxicap Capsules

37030 Giant Pack Ketac Silver Aplicap 300 Aplicap Capsules

Introductory Kit Ketac™ Silver Maxicap™


RotoMix™, CapMix™, pg. 128Aplicap™ Applier/Activator, pg. 24Maxicap™ Applier/Activator, pg. 24



24



Mixing Pads for Glass Ionomers

3420 MPX 1 3M ESPE Magic Mixing Pad (8 x 6.5 cm)

1961 P 4 Mixing Pads (6.5 x 7.5 cm)

70128 10 Mixing Pads small (15.4 x 8.7 cm)

70144 10 Mixing Pads universal (8 x 7 cm)

70190 10 Mixing Pads large (18 x 12.5 cm)

70180 10 Mixing Pads extra large (24 x 15 cm)

Ketac Conditioner for Dentin Pre-Treatment


37190 Ketac Glaze Light Curing Glaze1 Bottle 2.5 g

3303 FG Vitremer Finishing Gloss 1 Bottle 6.5 ml

3303 P Vitremer Primer 1 Bottle 6.5 ml

Accessoriesfor Glass Ionomers


Aplicap™ / Maxicap™ Accessories

73040 1 Aplicap Activator

73050 1 Aplicap Applier

73060 1 Maxicap Activator

73070 1 Maxicap Applier

3303 DT 50 Application Tips with pistons for Vitremer

37180 1 Combi Pack Maxicap Activator/Applier

37160 1 Combi Pack Aplicap Activator/Applier

25


26

Adhesive Systems and Composite Restoratives

Etch

ing

and

Bon

ding

Com

posi

teR

esto

rativ

esLine

rs

Gla

ss Io

nom

er R

esto

rativ

es

VPS

Prec

isio

n Im

pres

sion

M

ater

ials

Poly

ethe

rPr

ecis

ion

Impr

essi

on

Mat

eria

ls

Prel

imin

ary

Impr

essi

ons

and

Bite

Reg

istr

atio

n

27

Etching and Bonding

Etching Gel MiniTip™

Scotchbond™ Etchant

Adper™ Easy OneAdper™ SE PlusAdper™ Prompt™ L-Pop™

Adper™ Single Bond 2Adper™ Scotchbond™ Multi-PurposeAdper™ Scotchbond™ Multi-Purpose PlusScotchbond™ Dual Cure

Accessories for Adhesives, Composites and Compomers

Pages 29-35

Related ProductsCoJet™

Composite Restoratives

Filtek™ P90Filtek™ Z350 Universal RestorativeFiltek™ Z250 Flowable RestorativeFiltek™ Z250Filtek™ P60Valux™ Plus

F2000 CompomerConcise™ CompositeClinpro™ Sealant


Pages 36-49

Related ProductsElipar™ S10


Automatic Mixing Unit for Impression MaterialsPentamix™ 3

Mixing Units for CapsulesRotoMix™

CapMix™

Polymerization UnitElipar™ S10

Pages 168–174

Tem

poriz

atio

n

Infe

ctio

n C

ontr

ol

Dev

ices

, Acc

esso

ries

and

Spar

e Pa

rts

Loca

l Ane

sthe

tics

Cem

enta

tion

Cro

wns

and

Brid

ges

NEWNEW

NEWNEW

28



Adper™ SE PlusSelf-Etch Adhesive


Self-Etch AdhesiveAdper™ Single Bond 2Adhesive

Adper™ Scotchbond™

Multi-Purpose Adhesive

Handling

Technique Self-Etch Self-Etch Self-Etch Total-Etch Total-Etch

Components

Unit-dosedelivery

Works on wetor dry dentin*

Properties

Film thickness approximately10 microns

approximately20 microns




Radiopacity

Filled

Visual Control **

ApplicationTime 35 seconds 46 seconds 43 seconds 57 seconds 48 seconds

Indications

Direct

Indirect ( ) 2 ( ) 2 ( ) 1

Desensitizationof root surfaces

Sealants

We’ve got you coveredEvery day, dental professionals help us identify their needs. And scientists at 3M ESPE have leveraged 3M’sunmatched knowledge in adhesive technology to meet those needs with a full line of high-performance products.No matter how you like to work, we have you covered.

* Desiccation not recommended with any 3M ESPE adhesive product. All 3M ESPE adhesivesare designed to tolerate a wide range of surface moisture conditions.

** Activation Control: Visible control indicates whether or not the L-Pop™ system has beenadequately activated.

1. For these indications, the additional components of the Adper™ Scotchbond™ Multi-Purpose Plus Adhesive System (bottle activator/bottle catalyst) are required.

2. When used in combination with 3M™ ESPE™ RelyX™ ARC Adhesive Resin Cement.

Components Key:

EtchantSyringe

Unit dose 1 bottle 2 bottles

NEWNEW NEWNEW

29


Scotchbond™ EtchantPhosphoric Acid for Enamel and Dentin Etching

Product Benefits• Contains 35% phosphoric acid• The syringe version is coloured blue, which makes

precise application easier• The flexible tip can be individually adjusted before

application• The bottle version has a new low-viscosity gel-like

consistency• Does not dry out and retains its consistency• Etching liquid is a thin fluid and contains 37%

phosphoric acid

Overview Scotchbond™ EtchantItem No. Product Information

Refills

7523 2 Syringes Scotchbond Etchant, 3 ml each (Phosphoric Acid)50 Application Tips

7523 T 25 Application Tips

7423 1 Bottle Scotchbond Etchant 9 ml

1923 1 Bottle Etching Liquid 9 ml


Adper™ Single Bond 2, pg. 33Adper™ Scotchbond Multi-Purpose, pg. 34

Etching Gel MiniTip™

32% Phosphoric Acid in the MiniTip System


Standard Packs

40380 5 Cartridges, 2.5 g each1 Measuring lever1 Toothed Guide125 Application Tips

71180 125 Application Tips

77020 1 MiniTip Accessory with 2 Measuring Lever/Toothed Guide

Introductory Pack Etching Gel MiniTip™

30



Easy to use one-component self-etch adhesive.

Indications• All classes of fillings with light-curing composite or

compomer• Core build-ups made of light-curing composite• Repair of composite or compomer fillings• Root surface desensilization• Intraoral repair of existing composite, porcelain fused

to metal, and all ceramic restorations• Cementation of indirect restorations (composite or

compomer, ceramic and metal – after light curing*)

Product Benefits• One-bottle, one-coat convencience• High bond strength with proven chemistry and filler• Reduces the risk of post-operative sensitivity• Works on wet or dry enamel and dentin• High marginal integrity and low microleakage• Available in disposable Unit Dose delivery

Instructions for Use• Apply and Agitate Adper Easy One with the disposable

applicator for 20 sec. to all surfaces of the cavity• Blow dry for approx. 5 sec.• Light cure for 10 sec.• Storage and shelf life: To achieve the maximum

amount of shelf life, store the product at 2–8 °C. Refrigeration is not required if the product is depleted within six months.

Introductory Pack Adper™ Easy One


85000 Introductory Kit1 Bottle Adhesive Vial 5 ml, 50 Disposable Mixing wells,50 Disposable Microbrushes

85010 Refill1 Bottle Adhesive Vial 5 ml

85030 Adper Easy One Trial Kit1g Bottle Adhesive Vial


Filtek™ Family, pg. 36-42Valux Plus, pg. 39Elipar™ S10, pg. 126

NEWNEW

* and when combined with 3M ESPE RelyX™ ARC Adhesive Resin Cement* THE DENTAL ADVISOR (05/2008)

31


Adper™ SE PlusSelf-Etch Adhesive

A visibly different self-etch adhesives that inspires confidence.

Indications• Bonding between dentin/enamel and composite filling

or compomer filling• Intraoral repair of porcelain, composite and metal

using light-curing composite resin• Desensitization of hypersensitive teeth/root surface

Product Benefits• Color-change indicator verifies coverage and etch

activation• Radiopacity reduces risk of misdiagnosing secondary

caries• Total etch performance in a self-etch• High bond strength with proven chemistry and bonded

nanofiller• Reduces risk of post-operative sensitivity• Works on wet or dry enamel and dentin• High marginal integrity and low microleakage• Solvent-free hydrophobic covercoat for consistent

performance• Desensitizes root surface

Instructions for Use• Primer (Bottle A) goes on pink, acting as a guide for

achieving full coverage when applying the adhesive• Apply adhesive (Bottle B), and the pink color

disappears, indicating where the adhesive is placed• The color change also indicates the activation of the

acid and commencement of the etching process. Agitate for 20 seconds. Air dry for 10 seconds

• Apply hydrophobic covercoat (Bottle B) and air thin.

• Light cure for 10 seconds


84000 Introductory KitPart A (Primer) in cylindrical vial with Purple cap 5 g,Part B (Bond) in oblong vial with Black cap 5 g,50 Disposable 2-well Dispensing Wells, 50 Disposable Purple Microbrushes, 50 Disposable Black Microbrushes

84030 Trial KitPart A (Primer) in cylindrical vial with Purple cap 2.5 g,Part B (Bond) in oblong vial with Black cap 2.5 g,50 Disposable 2-well Dispensing Wells, 50 Disposable Purple Microbrushes, 50 Disposable Black Microbrushes

Refills

84010 Part APart A (Primer) in cylindrical vial with Purple cap 5 g

84010 Part BPart B (Bond) in oblong vial with Black cap 5 gor 10 seconds

rcoat (Bottle B) and

s

Part B (Bond) in


Filtek™ Family, pg. 36-42Valux Plus, pg. 39Elipar™ S10, pg. 126

NEWNEW

* THE DENTAL ADVISOR (05/2008)

Introductory Kit Adper™ SE Plus

32



Self-Etch Adhesive

All-in-one adhesive in the innovative L-Pop for direct restorations.

Indications• Adhesive for conventional light-cured composite and

compomer restoratives• Adhesive for pit and fissure sealants• Desensitization of exposed root surfaces

Product Benefits• Bonds to dentin, cut enamel and uncut enamel without

separate etch step• Clinically proven – over 100 million applications• Reduces the risk of post-operative sensitivity• Desensitizes hypersensitive root surface• Simplifies sealant technique• Available in disposable Unit Dose delivery• Fewer application steps:

Fewer sources of potential error mean greater safety• Yellow colour of the mixture for excellent visual control• Higher viscosity for a better wettability of the cavity• Better hygiene: No mess, no splashing, no contamination• Activation control: Visible control indicates whether or

not the L-Pop system has been adequately activated

Instructions for Use• Apply Adper Prompt L-Pop to the entire surface of the

cavity and rub in for 15 sec.• Blow dry• Apply a second coat• Blow dry again• Light cure for 10 sec. and place restoration

Activation control


41925 Normal Pack40 Adper Prompt L-Pop (4.8 ml)with Standard/Red Single-Use Applicators M

41926 Giant Pack100 Adper Prompt L-Pop (12.0 ml)with Standard/Red Single-Use Applicators M

41927 Bulk Pack200 Adper Prompt L-Pop (24 ml)with Standard/Red Single-Use Applicators M

41928 Economy Pack500 Adper Prompt L-Pop (60 ml)with Standard/Red Single-Use Applicators M

41923 Mini Pack20 Adper Prompt L-Pop (2.4 ml)with Fine/Yellow Single-Use Applicators XS

Giant Pack Adper™ Prompt™ L-Pop™

Unactivated Activated

By pressing the larger top chamber properly, the bulge from the second chamber pops up.


Elipar™ S10, pg. 126Filtek™ Family, pg. 36-42Valux Plus, pg. 39

F2000, pg. 43Clinpro™ Sealant, pg. 45

* THE DENTAL ADVISOR (07/2003)Medical Design Excellence Award 2001

Adper™

Prompt™ L-Pop™AAAAAAAAAAAAAAAAAAAdper™

Prompt™tt L-Pop

Over10

0Millio

n Applications

33


Adper™ Single Bond 2TOTAL-ETCH Adhesive

TOTAL-ETCH adhesive with nanofiller technology.

Indications• Direct, light-cured composite and compomer

restorations• Bonding of ceramic veneers in combination with

3M™ ESPE™ RelyX™ Veneer Cement• Indirect restorations made of metal, ceramic or

composite in combination with 3M™ ESPE™ RelyX™

ARC Adhesive Resin Cement• Desensitization of sensitive cervical areas• Corrections and repairs to ceramics, PFM and

composite restorations

Product Benefits• Excellent bonding to dentin and enamel• Doesn’t need shaking; nanofiller is stable and

will not settle• Convenient bottle design allows easy opening and

dispensing• Use for direct and indirect restorations• Desensitizes hypersensitive root surface

Instructions for Use• Apply Scotchbond Etchant to enamel and dentin.

Wait 15 sec. Rinse for 10 sec.Blot excess water with a cotton pellet or mini-sponge

• Apply 2–3 consecutive coats of Adper Single Bond 2 Adhesive for 15 sec. Gently air thin for 5 sec.Light cure for 10 sec.

• Place filling

Introductory Kit Single Bond 2


Elipar™ S10, pg. 126Filtek™ Family, pg. 36-42RelyX™ ARC, pg. 100

RelyX™ Ceramic Primer, pg. 100


51201 Introductory Kit1 Bottle Adhesive 6 g, 2 Syringes Scotchbond Etchant,3 ml each (Phosphoric Acid), 25 Application Tips for Scotchbond Etchant, 48 Single-Use Mixing Wells,60 Single-Use Brush Tips, 1 Brush Handle

Refills

51202 1 Bottle Adhesive 6 ml


34



Multi-Purpose Adhesive

The classical total-etch adhesive.

Indications• Direct, light-cured composite restorations• Bonding of veneers in combination with 3M™ ESPE™

RelyX™ Veneer Cement• Ceramic and composite repair

Product Benefits• Strong, reliable bonds for any application• Bonds to wet or dry tooth surfaces• Reduces microleakage that can contribute to

post-operative sensitivity

Instructions for Use• Apply Scotchbond Etchant to enamel and dentin for

15 sec. rinse and dry• Apply Adper Scotchbond Multi-Purpose Primer to

enamel and dentin. Dry gently with an airstream• Apply Adper Scotchbond Multi-Purpose Adhesive to

enamel and dentin, light-cure for 10 sec.• Place filling


7540S Introductory Kit1 Bottle Primer 8 ml, 1 Bottle Adhesive 8 ml, 2 Syringes Scotchbond Etchant, 3 ml each (Phosphoric Acid), 25 Application Tips for Scotchbond Etchant, 60 Single-Use Brushes, 3 Applicator Handles, 1 Mixing Well

Refills

7542 1 Bottle Primer 8 ml


7523 2 Syringes Scotchbond Etchant, 3 ml each (Phosphoric Acid), 50 Application Tips

2721 1 RelyX Ceramic Primer, 5 ml

Introductory Kit Adper™ Scotchbond™ MP


Elipar™ S10, pg. 126Filtek™ Family, pg. 36-42RelyX™ ARC, pg. 100



Multi-Purpose Plus

Additional indications with components of the Adper Scotchbond Multi-Purpose Adhesive system. (activator and catalyst)

Indications• Luting of indirect restorations including Maryland

bridges and posts with RelyX™ ARC Resin Cement• Bonding of orthodontic brackets

Product Benefits• Dual-curing• One system for all indications• Bonds extremely well to enamel and dentin


Refills

7542 1 Bottle Primer 8 ml


7546 1 Bottle Activator 4 ml

7547 1 Bottle Catalyst 4 ml

2721 1 Bottle RelyX Ceramic Primer 5 ml

7523 2 Syringes Scotchbond Etchant, 3 ml each (Phosphoric Acid), 50 Application Tips

2007 Preferred Product


35


Accessoriesfor Adhesives, Composites and Compomers


Refills

1919 B 60 Single-Use Brush Tips

1919 F 100 Application Tips

3303 DT 50 Application Tips with Piston for Vitremer and Ketac N 100

3402 120 Bendable Applicator Brushes (blue, green, red, yellow)

1994 S 50 Mixing Sticks

7522 S 200 Mini-Sponges

5706 SD 1 Capsule Dispenser

5706 SD

Scotchbond™ Dual CureAdhesive System

Indications• Cavities of all classes• Lining of sensitive cervical areas

Product Benefits• Dual-curing• Tried-and-tested system


7535 Introductory Kit1 Bottle Solution 1 (Liquid) 5 ml, 1 Bottle Solution 2 (Resin) 5 ml, 1 Bottle Scotchbond Etchant 9 ml (Phosphoric Acid), 1 Mixing Well, 2 Application Brushes

Refills

7533 L 1 Bottle Solution 1 (Liquid) 5 ml

7533 R 1 Bottle Solution 2 (Resin) 5 ml

7423 1 Bottle Scotchbond Etchant 9 ml (Phosphoric Acid)


1961 P 4 Mixing Pads (6.5 cm x 7.5 cm) for Glass Ionomers

1994 P 10 3M ESPE Concise Mixing Pads (5 cm x 4 cm)

7544 4 Mixing Wells for Adhesives

3401 W 96 Disposable Mixing Wells (white)

42380 50 Brush M (Regular, Grey Single-Use applicators)

41904 50 Brush XS (Fine, Yellow Single-Use applicators)

47801 80 Single-Use Brushes

74088 1 Brush Grip for Single-Use Brushes

1961P

1994P

1919B1919F 3402

7522S

3401W1994S

7544

36



Elipar™ S10, pg. 126Adper™ Adhesive Systems, pg. 30-35Filtek™ Z350 Flowable, pg. 37

Sof-Lex™, pg. 48-49


6018AL Introductory KitIncludes 5 - 4g syringes, 1 each of 5 differentshades(A2,A3,A3.5. B2,OA3)

Refills

6018A1 1 - 4g syringe of Shade Al

6018A2 1 - 4g syringe of Shade A2

6018A3 1 - 4g syringe of Shade A3

6018A3.5 1 - 4g syringe of Shade A3.5

6018B2 1 - 4g syringe of Shade B2

6018B3 1 - 4g syringe of Shade B3

6018C2 1 - 4g syringe of Shade C2

60180A3 1 - 4g syringe of Shade 0A3

Introductory Kit Filtek™ Z350

Filtek™ Z350 Universal Restorative

Instructions for Use• Application in layers as indicated in the following tableShade Increment depth Curing-timeOpaque A3 1.5 mm 40 sec.All other shades 2.0 mm 20 sec.

Based on 3M ESPE's unique nanotechnology, which combines excellent strength with natural gloss. The optimized color system gives you the desired results fast - with smooth handling and high quality.

Indications• Direct anterior and posterior restorations class I-V• Indirect inlays, onlays and veneers• Splinting• Sandwich technique with glass inomers resin materials• Coe build-up

Product Benefits• Excellent polish and polish retention - comparable to a microfill.• Wear resistance equivalent to enamel - excellent for posterior restorations• User-defined handling.• Available in 8 popular shades that blend easily with

outstanding chameleon effect.• Provides exceptional flow with ideal slump resistance

* THE DENTAL ADVISOR (Vol. 25, No. 08)(Evaluated under the US Brand Filtek™ Supreme Plus)

37




RelyX ARC, pg. 66

Our new benchmark for owable composites utilizing 3M ESPE’s unique nanotechnology.Filtek Z 350 Flowable delivers excellent strength and optimal wear resistance combined with excellent esthetic properties including polish, polish retention and color match.

Indications Restoration of minimally invasive cavity preparations, including class III and V restorations and occlusal pits and ssures

ssure sealantblockout

rylic temporary materials

Product Bene ts Excellent physical properties: High strength and low wear

rties Flow-on-demand handling: ows under pressure – stays where you want it

Available in 6 shades, one opaque shade – Opaque A3 ble

color such as dentin discoloration

Instructions for UseApplication in layers as indicated in the following table

Shade Increment depth Curing-timeOpaque A3 2.0 mm 40 sec.All other shades 2.0 mm 20 sec.


6018AL Introductor KitIncludes 5 - 2g syringes, 1 each of 5 differentshades(A2,A3,A3.5. B2,OA3)3 Bags of dispensing tips (20 tips per bag)

Refills6031AL 2g syringes, 1 each of 5 different shades (A2, A3, A4. B2,

0A3) 3 bags of dispensing tips (20 tips per bag)

6031A2 2 - 2g syringes of Shade A2, 20 dispensing tips



6031B2 2 - 2g syringes of Shade B2, 20 dispensing tips

6031C2 2 - 2g syringes of Shade C2, 20 dispensing tips

60310A3 2 - 2g syringes of Shade 0A3, 20 dispensing tips

Filtek" Z350 Flowable Restorative

Introducto Kit Filtek Z350 Flowable

Filtek™ Z350 Flowable Flowable Restorative

38


Filtek™ Z250Universal Restorative System

Universal composite for anterior and posterior restorations.

Indications• Direct anterior and posterior restorations class I–V• Indirect inlays, onlays and veneers• Sandwich technique• Core build-ups• Splinting

Product Benefits• Long-term clinical history: 10 years of clinical performance• Excellent handling: resists slumping, and virtually no sticking to instruments• Outstanding versatility: useful for anterior and posterior restorations• Speed and convenience: easy-to-use, cures in just 20 seconds• Natural esthetics: available in multiple shades matching tooth structure• 15 shades available in syringes or capsules according

to preference• Patented zirconium/silica filler for contrast rich

radiopacity without heavy metal additives

Instructions for UseShade Increment depth Curing-timeA1, A2, A3 2.5 mm 20 sec.A3.5, A4, B1 2.5 mm 20 sec.B2, B3, C2 2.5 mm 20 sec.C3, D3 and I 2.5 mm 20 sec.B0.5**, C4, UD 2.0 mm 30 sec.


Refills S ringes

1370 A1 1 Syringe 4 g, Shade A1



1370 A3.5 1 Syringe 4 g, Shade A3.5


1370 B0.5 1 Syringe 4 g, Shade 3M B0.5**

1370 B1 1 Syringe 4 g, Shade B1



1370 C2 1 Syringe 4 g, Shade C2



1370 D3 1 Syringe 4 g, Shade D3

1370 I 1 Syringe 4 g, Shade I

1370 UD 1 Syringe 4 g, Shade UD

Refills Capsules

6021 A1 20 Capsules, 0.2 g each, Shade A1



6021 A3.5 20 Capsules, 0.2 g each, Shade A3.5


6021 B0.5 20 Capsules, 0.2 g each, Shade 3M B0.5**

6021 B1 20 Capsules, 0.2 g each, Shade B1



6021 C2 20 Capsules, 0.2 g each, Shade C2



6021 D3 20 Capsules, 0.2 g each, Shade D3

6021 I 20 Capsules, 0.2 g each, Shade I

12-2716-0385-9

1 Shade Guide Filtek Z250

** 3M ESPE Shades and not a part of the Vitapan Classical Shade Guide

Introductor Kit Filtek Z250 S ringes


1370L Introductor Kit S ringes4 Syringes, 4 g each in the Shades A2, A3.5, A4, B3, 1 Bottle Adper Single Bond 2 6g, 1 Syringe Scotchbond Etchant 3 ml, Accessories, Shade Guide, Trial Kit Sof-Lex Pop-On XT Polishing Discs

6021 Introductor Kit Capsules50 Capsules, 0.2g Each ( A2, A3.5, A4, B2) 1 Bottle Adper Single Bond 2 6g, 1 bottle Scotchbond Etchant 3 ml, Accessories, Shade Guide, Trial Kit Sof-Lex Pop-On XT Polishing Discs


Elipar™ S10, pg. 126Adper™ Adhesive Systems, pg. 30-35Filtek™ Z350 Flowable, pg. 37

Sof-Lex™, pg. 48-49


Silver Edition

39


Valux™ PlusRestorative System

The universal composite with more than 10 years history in clinical use.

Indications Direct anterior and posterior restorations class I–V

ays, onlays and veneers

Product Bene ts Maximum wear resistance and fracture toughness Minimal leakage at margins when used with Adper™ ™ Multi-Purpose

Blends with surrounding tooth colour for a more natural nish

Instructions for UseApplication in lay

Light-cure each layer for 40 sec.




5540SB Introductor Kit9 Syringe, 4g each in the shades 2xA2, 2xA3, 1xA3, 1xA1, A3.5, B3, C2, UD, Adhesive Adper Single Bond 2 (6g), 2syringes ScotchBond Etehant 3ml, 50 applicators, accessories, 1 Mixing Well

Refills

5540A1 1 - 4g syringe



5540A3.5 1 - 4g syringe

5540B2 1 - 4g syringe

5540B3 1 - 4g syringe

5540C2 1 - 4g syringe

5540UD 1 - 4g syringe

Introductor Kit Valu Plus

40




adaptation

microleakage secondary caries

enamelmicro-cracksmarginal staining

postoperativesensitivity

ginal staining

The advantages at a glance:• Lowest polymerization shrinkage (< 1 %*) for excellent

marginal integrity and reduced risk of secondary caries• Significantly reduced polymerization stress,

thereby decreasing the risk of enamel fractures and postoperative sensitivity

• Excellent ambient light stability• Extraordinarily low water absorption, for substantially

reduced exogenic staining• Proven to have excellent compressive strength for stress-

bearing restorations• High flexural strength protects the tooth from fractures

and stabilizes it at the same time• Available in four shades: A2, A3, B2, C2

* Tested with the ‘Bonded Disc Method’ (Watts et al., Dental Materials 281, 1991).

Now available for our dental practice: the revolutionar low-shrink restorative Filtek P90 S stem for all posterior restorations.

Source: Prof. Watts, University of Manchester

Lowest shrinkage to minimi e pol meri ation stress.Shrinkage Stress (Bioman method) and Pol meri ation Shrinkage (Bonded Disc Method).

Filtek™ P90Low Shrink Posterior Restorative

3) Restoration after 2 weeks; view from palatal

1) Before treatment: cusp fracture and secondar caries on tooth 26

2) After caries removal

1 2

3

NEWNEW

41



RelyX ARC, pg. 100RelyX Temp E, pg. 107Elipar S10, pg. 126

NEWNEW


4762I Introductor Kit S ringes4 Syringes, 4 g each, in the Shades A2, A3, B2, C2,1 Vial Primer 5 ml, 1 Vial Bond 5 ml, 100 Microbrushes(50 black, 50 green), 1 Mixing Well, 1 Shade Guide

4762TK Trial Kit S ringes1 Syringe 4 g, Shade A3, 1 Vial Primer 5 ml,1 Vial Bond 5 ml, 100 Microbrushes (50 black, 50 green),1 Mixing Well

Refills S ringes

4762A2 1 Syringe 4 g, Shade A2

4762A3 1 Syringe 4 g, Shade A3

4762B2 1 Syringe 4 g, Shade B2

4762C2 1 Syringe 4 g, Shade C2

Introductor Kit Filtek P90 S ringes

Adhesive S stem

4763 1 Vial Primer (5 ml), 1 Vial Bond (5 ml),100 Microbrushes (50 black, 50 green)

4763P 1 Vial Primer (5 ml)

4763B 1 Vial Bond (5 ml)

The advantages at a glance:• Specially developed to ensure the optimal use

of Filtek™ P90• Excellent adhesion to enamel and dentin• Easy application

To complement the superior properties of Filtek™ P90, 3M ESPE has developed a special self-etch methacrylate adhesive: Silorane System Adhesive. This easy-to-use sixth-generation two-component system ensures that the silorane-based composite will optimally adhere to enamel as well as to dentin.

Silorane System AdhesiveDedicated to being a perfect partner

Hydrophilic Hydrophobic

Silorane System AdhesivePrimer

Silorane System AdhesiveBond

Tooth Filtek™ P90

Due to the unique chemistr of Filtek P90, it can onl be used with its dedicated Silorane S stem Adhesive.

Filtek P90

Storage and shelf life: To achieve the maximum amount of shelf life, store the product at 2–8 °C. Refrigeration is not required if the product is depleted within six months.

Instructions for Use• Apply and rub the Primer on the tooth surface for 15 secs.• Blow dry of 5 secs. Light cure for 10 secs.• Apply the Bond on the tooth surface, Air thin• Light cure for 10 secs.• Application of Filtek P90 in layers of max. 2.5mm• Light cure for 20 secs. with Elipar S10

42




Filtek™ P60Posterior Restorative System

Packable composite for posterior restorations.

Indications• Direct posterior restorations class I and II• Sandwich technique• Core build-ups

Product Benefits• Superior packability• Fast curing-time – only 20 sec. to cure

an increment of 2.5 mm• Available in 3 shades• Low polymerisation shrinkage• Excellent wear resistance and strength

Instructions for Use• Application in layers of max. 2.5 mm • Light-cure each layer for 20 sec.


4720 Introductor Kit3 Syringes, 4 g each in the Shades A3, B2, C2, 1 Bottle Adper Adper Single Bond 2 3ml, 1 Syringe Scotchbond Etchant 3 ml, Accessories, Shade Guide

Refills




Introductor Kit Filtek P60



43


F2000Compomer Restorative System

Light cured compomer filling material in syringes and capsules.

Indications• Direct restorations class III and V • Root caries lesions• Class II laminate or open sandwich technique• Class I and class II cavities in primary teeth• Core build-ups• Class I and II restorations with cavities less than two

thirds of the intercuspal distance

Product Benefits• Fluoride release• Easy to model, does not stick to the instrument• Excellent marginal sealing• Quick application• Excellent enamel and dentin adhesion in combination

with Adper™ Prompt™ L-Pop™ from 3M ESPE• Radiopaque, light-cured

Instructions for Use• Application in layers of 2.5 mm or 2.0 mm

(shades A3.5, A4, C4, CG, CY)• Light-cure each layer for 40 sec.

Refill F2000 S ringe


Refills S ringes



2020 A3.5 1 Syringe 4 g, Shade A3.5





2020 Blue 1 Syringe 4 g, Shade Blue

2020 P 1 Syringe 4 g, Shade Pedo

Refills Capsules



2021 A3.5 20 Capsules, 0.2 g each, Shade A3.5





2021 Blue 20 Capsules, 0.2 g each, Shade Blue

2021 P 20 Capsules, 0.2 g each, Shade Pedo

Refills

2024 1 Clicker/Adhesive System 2.6 ml

41926 100 Adper Prompt L-Pop (12 ml)

2024 W 4 Mixing Wells


Elipar™ S10, pg. 126Adper™ Adhesive Systems, pg. 30-35


44


Concise™ CompositeComposite for Anterior Restorations Paste/Paste System


1925 Introductor Kit1 Concise Paste A 16 g, 1 Concise Paste B 16 g (Paste Bis the Catalyst for Paste A), 50 Mixing Sticks, 1 Mixing Pad (5 x 4 cm)

Introductor Kit Concise

45


Clinpro™ Sealant Fissure Sealant

Light-cure fluoride-releasing sealant for enamel pits and fissures, with color-change technology to visualise placement.

Indications• Effective protection fort the early prevention of caries in

enamel pits and fissures

Product Benefits• Convenient direct delivery syringe for easy application• Color-change technology to visualise placement• Low viscosity to flow easily into pits and fissures• Contains and releases fluoride• Bonds to enamel• Long-lasting protection against caries

Instructions for Use• The teeth must be sufficiently erupted• The pits and fissures should be deep• Clean, dry and etch (for minimum 15 and maximum

60 seconds) the enamel• Rinse the enamel thoroughly with water• When Clinpro Sealant is used together with Adper™

Prompt™ L-Pop™ Self-Etch Adhesive, rinsing is not necessary and application is even easier

• Air-dry the enamel: the etched surfaces should bematte white

• Apply sealant slowly into the pits and fissures. Stirring the sealant with the syringe tip during or after placement will help eliminate any possible bubbles, and enhance the flow into the pit and fissures.• Cure the sealant by exposing it to light for 20 seconds

placing the light as close a possible to the sealant without touching it.

• Evaluate the results• Wipe off any sticky residue with cotton wool• Check the occlusion and adjust if necessary


12636 Introductor Kit S ringes2 Syringes Sealant, 1.2 ml each, 1 Syringe Scotchbond Etchant 3 ml, 20 Sealant Syringe Tips Black, 25 Etchant Syringe Tips Blue

12631 Introductor Kit Bottles2 Bottles Sealant, 6 ml each, 1 Bottle Scotchbond Etchant9 ml, 2 Applicator Handle, 60 Single-use Brush Tips,50 Fibre Tips, 1 Mixing Well

Refills

12637 1 Syringes Sealant 1.2 ml, 10 Sealant Syringe Tips Black

12632 1 Bottle Sealant 6 ml

12621MW 4 Mixing Wells

12626T 10 Sealant Dispensing Tips

7523 2 Syringes Scotchbond Etchant, 3 ml each (Phosphoric Acid),50 Application Tips

7523T 25 Application Tips

7423 1 Bottle Scotchbond Etchant 9 ml

Introductor Kit Clinpro Sealant S ringes


Elipar™ S10, page 126


46


Concise™

White Sealant System

Indications• Fissure sealing in combination with the acid etching

technique

Product Benefits• Both self-curing and light-curing version available• Easy application and check due to white colouring• The integrity of the sealing can be quickly and safely

checked by the patient thanks to the white opaque colouring


Concise White Sealant Light Cured

1930 Introductor Kit1 Bottle Scotchbond Etchant 9 ml, 2 Bottles Concise White Sealant Resinpolymer, 6 ml each, 60 Single-use Brush Tips, 1 Mixing Well, 1 Applicator Handle

1930 W Refill1 Bottle Concise White Sealant Resinpolymer 6 ml

Concise White Sealant Self Cured

1910 Introductor Kit1 Bottle Scotchbond Etchant 9 ml, 1 Bottle Concise White Sealant Resin A 6 ml, 1 Bottle Concise White Sealant ResinB 6 ml, 60 Single-use Brush Tips, 1 Application Brush, 1 Mixing Well, 1 Applicator Handle

47




Cavit™/Cavit™-W/Cavit™-GTemporary Filling Material

The Evergreen from 3M ESPE.

Indications• Cavit (high surface hardness):

– Temporary filling of occlusion-loaded restorations• Cavit-W (reduced final hardness, increased adhesion):

– Temporary filling after endodontic treatments• Cavit-G (removable completely without burs):

– Inlay-preparation

Product Benefits• Proven filling material for temporary fillings• Simple to apply with filling instrument• Quick and void-free curing in a moist environment• Slight expansion of the filling material ensures a well-

sealed margin

Instructions for Use• Apply Cavit in moist cavity• Avoid any exposure to mastication forces for about

2 hours after application


Cavit

44016 4 Tubes, 7 g each

44030 1 Glass with Screw-on lid 28 g

44024 Clinic Pack Cavit20 Tubes, 7 g each

Cavit-W

44115 4 Tubes, 7 g each

44130 1 Glass with Screw-on lid 28 g

44123 Clinic Pack Cavit-W20 Tubes, 7 g each

44313 Refill Cavit-G1 Glass with Screw-on lid 28 g

Refill Cavit Tubes

48


Sof-Lex™

Finishing and Polishing System

Pick up the pace without sacrifying great results.

Indications Sof-Lex polishing discs and nishing strips for polishing of composite, compomer, metal and ceramic Sof-Lex polishing discs for facial and lingual margins of anterior and posterior restorations Sof-Lex nishing strips for interproximal areas

Product Bene tsSof-Lex Polishing Discs:

Flexible polishing discs with aluminium oxide coating Four different abrasive grades (coarse to super ne) and two disc thicknesses (normal and extra thin) Each abrasive grade is identi ed by a special colour coding system Discs can be easily changed due to the patented Pop-On mandrel system Fracture resistant and sterilisable metal mandrel

Sof-Lex Finishing Strips:Thin, exible backing with aluminium oxide coating Centre gapped strip with two abrasive grades per strip, which allows interproximal accessThree different types ( ne/super ne, coarse/medium, coarse/medium [narrow])

Abrasive Grades

Super ne (1–7 m)

Fine (3–9 m)

Medium(10–40 m)

Coarse(50–90 m)

Sof-Le Polishing Discs

8691SF

8690SF

8691F

8690F

8691M

8690M

8691C

8690C

Sof-Le Polishing Discs XT (Extra Thin)

8692SF

8693SF

8692F

8693F

8692M

8693M

8692C

8693C

Sof-Le Finishing Strips

1956 1954

1954N

SF F M C

Basic Kit Sof-Le

49




1980 Introductory Kit Sof-Lex Polishing Discs120 Sof-Lex Pop-On Polishing Discs; superfine, fine, medium, coarse 30 pcs each; Ø 9.5 mm, 120 Sof-Lex Pop-On Polishing Discs; superfine, fine, medium, coarse 30 pcs each; Ø 12.7 mm, 1 RA mandrel

Refill Sof-Lex Polishing Discs Ø 9.5 mm

8690 SF 50 Sof-Lex Pop-On Polishing Discs, superfine, Ø 9.5 mm

8690 F 50 Sof-Lex Pop-On Polishing Discs, fine, Ø 9.5 mm

8690 M 50 Sof-Lex Pop-On Polishing Discs, medium, Ø 9.5 mm

8690 C 50 Sof-Lex Pop-On Polishing Discs, coarse, Ø 9.5 mm

Refill Sof-Lex Polishing Discs Ø 12.7 mm

8691 SF 50 Sof-Lex Pop-On Polishing Discs, superfine, Ø 12.7 mm

8691 F 50 Sof-Lex Pop-On Polishing Discs, fine, Ø 12.7 mm

8691 M 50 Sof-Lex Pop-On Polishing Discs, medium, Ø 12.7 mm

8691 C 50 Sof-Lex Pop-On Polishing Discs, coarse, Ø 12.7 mm

2380 Introductory Kit Sof-Lex XT Polishing Discs (extra thin)120 Sof-Lex XT Pop-On Polishing Discs, superfine, fine, medium, coarse; 30 pcs each; Ø 9.5 mm, 120 Sof-Lex XT Pop-On Polishing Discs, superfine, fine, medium, coarse; 30 pcs each; Ø 12.7 mm, 1 RA mandrel

Refill Sof-Lex XT Polishing Discs Ø 9.5 mm(extra thin)

8693 SF 50 Sof-Lex XT Pop-On Polishing Discs, superfine, Ø 9.5 mm

8693 F 50 Sof-Lex XT Pop-On Polishing Discs, fine, Ø 9.5 mm

8693 M 50 Sof-Lex XT Pop-On Polishing Discs, medium, Ø 9.5 mm

8693 C 50 Sof-Lex XT Pop-On Polishing Discs, coarse, Ø 9.5 mm

Refill Sof-Lex XT Polishing Discs Ø 12.7 mm (extra thin)

8692 SF 50 Sof-Lex XT Pop-On Polishing Discs, superfine Ø 12.7 mm

8692 F 50 Sof-Lex XT Pop-On Polishing Discs, fine, Ø 12.7 mm

8692 M 50 Sof-Lex XT Pop-On Polishing Discs, medium, Ø 12.7 mm

8692 C 50 Sof-Lex XT Pop-On Polishing Discs, coarse, Ø 12.7 mm


2385 P Basic Kit Sof-Lex Finishing Strips120 Sof-Lex Pop-On Polishing Discs; superfine, fine, medium, coarse 30 pcs each; Ø 9.5 mm, 120 Sof-Lex Pop-On Polishing Discs; superfine, fine, medium, coarse 30 pcs each; Ø 12.7 mm, 120 Sof-Lex XT Pop-On Polishing Discs, superfine, fine, medium, coarse; 30 pcs each; Ø 9.5 mm, 120 Sof-Lex XT Pop-On Polishing Discs, superfine, fine, medium, coarse; 30 pcs each; Ø 12.7 mm, 1 RA mandrel, 15 Sof-Lex Finishing Strips, coarse/medium, 15 Sof-Lex Finishing Strips, coarse/medium narrow, 15 Sof-Lex Finishing Strips, fine/superfine

Refills Sof-Lex Finishing Strips

1954 150 Sof-Lex Finishing Strips, coarse/medium

1954 N 150 Sof-Lex Finishing Strips, coarse/medium narrow

1956 150 Sof-Lex Finishing Strips, fine/superfine

Sof-Lex Accessories

1983 RA 3 RA mandrels for Sof-Lex Polishing Discs

50

Try-in of Frame work

Anamnesis Patient findings

(X-Ray, Periodontal examination)

Final RestorationLava™ Crowns & Bridges

PolishingSof-Lex™

CementationRelyX™ U100

RelyX™ Luting 2Elipar™ S10

LayeringLava™ Ceram

Milling Center Manufacturing of frames

Lava™



51

TreatmentPlan

CariesRemoval

Preparation,Retraction

Makingof Model

PreliminaryImpressionPosition™ Penta™

Local AnestheticsUbistesin™

TemporizationProtemp™ Crown

Protemp™ 4

Core Build upRelyX™ Fiber PostRelyX™ Unicem

Filtek™ Universal Composites

BiteRegistration

Imprint™ BiteRamitec™

PrecisionImpressioning

Monophase Technique: Impregum™

1-step/-2-step Technique: Express™ 2

RelyX™ Temp NE

Position™ Tray

XT

52

IMPRESSION TECHNIQUE

IMPRESSION MATERIALS

TRAY MATERIALS Color Tra Material RECOMMENDED WASH MATERIALSAutomatic

Mi ingHand

Mi ing

POLYETHER IMPRESSION MATERIALS

Monophase Technique

Impregum Penta Soft

Impregum Penta Soft Quick

Impregum Penta

Impregum F

1-Step/Tray-Wash Technique

Impregum Penta H DuoSoftImpregum Garant L DuoSoft or

Impregum Penta L DuoSoft

Impregum Penta H DuoSoft Quick Impregum L DuoSoft Quick

VPS IMPRESSION MATERIALS

1-Step/ Tray-Wash Technique

E press XT Penta HE press XT Light Bod or

E press XT Regular Bod

E press XT Penta H QuickE press XT Light Bod Quick or

E press XT Regular Bod Quick

Imprint II Garant Quick Step

Imprint II Garant

Putty Wash Technique

E press XT Penta PuttE press XT Light Bod Quick or

E press XT Light Bod

E press Putt STD

E press XT Light Bod

E press XT Light Bod Quick

E press Light Bod fast settingE press Light Bod

BITE REGISTRATION MATERIALS

Bite RegistrationRamitec Penta

Imprint Bite

ALGINATE INDICATION MATERIALSVPS Alginate Replacement Position Penta / -Quick

Alginate Palgat Plus / -Quick

Impression Materials from 3M ESPE for Each Indication

Soft

53

AutomaticMi ing:

Pentamix™

INDICATIONS DETAILS SEE PAGE NO.

Color Wash Material

Cro

wn-

and

B

ridg

e Im

pres

sion

s

Inla

-/O

nla

Im

pres

sion

s

Fiat

ion

Impr

essi

ons

Impl

ant

Impr

essi

ons

Func

tiona

l Im

pres

sion

s

Impr

essi

ons

for

mak

ing

tem

p.re

stor

atio

ns

Impr

essi

ons

for

stud

mod

els

Impr

essi

ons

for

oppo

sing

de

ntiti

ons

Impr

essi

on

for

fabr

icat

ion

of S

plin

ts/

Mou

thgu

ards

Bite

R

egis

trat

ion

60

61

64

65

62

63

73, 74

73, 74

76

77

72, 74

74, 75

55

56

52

54

and Each TechniqueJarDispenser

Hand Mi ing:

Tube

54

Polyether Precision Impression Materials

Line

rs

Gla

ss Io

nom

er R

esto

rativ

es

Etch

ing

and

Bon

ding

Com

posi

te R

esto

rativ

es

VPS

Prec

isio

n Im

pres

sion

M

ater

ials

Pol

ethe

rPr

ecis

ion

Impr

essi

on

Mat

eria

ls

Prel

imin

ar Im

pres

sion

s an

d B

ite R

egis

trat

ion

55

Tempori ation

Materials for IndividuallFabricated Crowns and BridgesProtemp™ 4Protemp™ II

Preformed CrownsProtemp™ CrownIso-Form CrownsPolycarbonate CrownsStainless Steel Crowns

Crown InstrumentsCrown ScissorsCrown Crimping PliersCrown Contouring Plier

Pages 84-90

Related ProductsGarant™ Accessories

Automatic Mi ing Unit

Pentamix™ 3

Pol etherPrecision Impression Materials

Tra MaterialsImpregum™ Penta™ SoftImpregum™ Penta™ Soft QuickImpregum™ Penta™ H DuoSoft™

Impregum™ Penta™ H DuoSoft™ QuickImpregum™ Penta™

Permadyne™ Penta™ HImpregum™ Soft

Wash MaterialsImpregum™ Penta™ L DuoSoft™

Impregum™ Garant™ L DuoSoft™

Impregum™ L DuoSoft™ Quick

Pages 56-62

Related ProductsGarant™ AccessoriesImpression Accessories

Preliminar Impressions

Position™ Penta™ (VPS)Position™ Penta™ Quick (VPS)

Position™ Tray (Disposable Impression Tray)

Palgat™ Plus™ (Alginate)Palgat™ Plus™ Quick (Alginate)

Bite Registration

Ramitec™ Penta™ (Polyether)Ramitec™ (Polyether)

Imprint™ Bite (VPS)

Pages 76-80

Related ProductsPentamix™ 3 Garant™ AccessoriesImpression Accessories

Tem

pori

atio

n

Infe

ctio

n C

ontr

ol

Loca

l Ane

sthe

tics

Cem

enta

tion

Cro

wns

and

Brid

ges

Dev

ices

, Acc

esso

ries

and

Spar

e Pa

rts

NEWNEW

56



Pentami S stem one s stem for virtuall ever indication and techniqueMore than 200.000 Pentamix Systems sold globally have set a standard. The wide range of Penta materials available gives you the choice between many different viscosities and setting times.Now the new Pentamix 3 Automatic Mixing Unit offers the speed and convenience required for ultimate procedure efficiency.• Fast and efficient – Time-saving procedure and push-

button activation.• Convenient – Easy handling.• Reliable – Homogeneous and void-free mixture of

reproducible quality.• Economical – No waste of material due to exact dosage.• Hygienic – Direct filling of tray and syringe.• One fits all – Suitable for Polyether and VPS

materials including putty materials as well as alginate replacements.

Pentami 3 Automatic Mi ing Unit

Ne t GenerationPentami 3 Automatic Mi ing Unitis now available!

Benefits of newPentami 3 Automatic Mi ing Unit:• Fastest automatic mixer worldwide – Mixes and

dispenses Penta™ materials faster than any other automatic mixing unit (twice as fast as Pentamix™ 2).

• Faster work procedure – Easier procedure with quick-setting materials and less stress for assistants.

• Smallest automatic mixing unit on the market –Compact design saves valuable counter/wall space.

• Enhanced handling – Handles more convenient and ergonomic with one-button operation from both sides of the unit, easier cartridge exchange and easy-to-attach mixing tips.

• Contemporary and robust designPentami 3 Automatic Mi ing Unit,wall-mounted


Penta™ Impression Materials(see Product Range)


NEWNEW 2009

Assistant’s Choice

57


Penta Foil BagsAs protection against counterfeit products, the new Penta™ foil bags

are now labelled with 3M Secure Color™ ES Authentication technology.

Penta Impression MaterialsProduct Range: Polyether Impression MaterialsImpregum™ Penta™ SoftImpregum™ Penta™ Soft QuickImpregum™ Penta™ H DuoSoft™

Impregum™ Penta™ H DuoSoft™ QuickImpregum™ Penta™ L DuoSoft™

Impregum™ Penta™

VPS Impression MaterialsExpress™ XT Penta™ PuttyExpress™ XT Penta™ HExpress™ XT Penta™ H Quick

VPS Alginate ReplacementPosition™ Penta™

Position™ Penta™ Quick Polyether Bite Registration MaterialRamitec™ Penta™



77871 1 Pentamix 3 – 230 V Western Europe

77873 1 Pentamix 3 – 230 V GB

NEWNEW

NEWNEW


Penta™ Impression Materials(see Product Range)

58



Pentamix™ SystemLava™ Precision Solutions


Polyether Impression Material

Polyether precision impression material for the monophase technique. For automatic mixing and dispensing in the Pentamix™ System from 3M ESPE.

Indications• Fixation impressions• Implant impressions• Crown and bridge impressions• Inlay and onlay impressions• Functional impressions

Product Benefits• Automatic mixing and dispensing with the Pentamix™ 3

or Pentamix™ 2 Automatic Mixing Unit• Only one viscosity for syringe and tray• For impressions of uncompromising precision due to convincing polyether properties: – Initial hydrophilicity – hydrophilic when it counts – Thixotropy and excellent flow properties – throughout

the entire working time – “Snap-set” behaviour ensures constant flow properties

during working period and less distortions• Reduces the need of costly adjustments, remakes and

retakes

Instructions for Use• Working time (including mixing):

Impregum Penta 2:45 min.• Setting time (from begin of mix):

Impregum Penta 6:00 min.• Disinfection of the impression by 10 min. immersion,

e.g. with Impresept™ or a 2% glutaraldehyde solution


P31684 Introductor Kit for Pentami 31 Base Paste 300 ml, 1 Catalyst 60 ml, 1 ImpregumPenta Cartridge, 10 Penta Mixing Tips Red, 1 Penta Elastomer Syringe, 1 Bottle Polyether Adhesive 17 ml

31684 Introductor Kit for Pentami 2(Kit contents see Item No. P31684)

Refills

31644 2 Base Paste, 300 ml each, 2 Catalyst, 60 ml each

P3792 1 Impregum Penta Cartridge for Pentamix 3

77792 1 Impregum Penta Cartridge for Pentamix 2

30600 1 Bottle Polyether Adhesive 17 ml

Accessories see page 92

Introductor Kit Impregum Penta for Pentami 3

NEWNEW

NEWNEW

59


Impregum™ Penta™ SoftImpregum™ Penta™ Soft QuickPolyether Impression Material “New Generation” polyether precision impression materials (regular and fast setting version) for the monophase technique. For automatic mixing and dispensing in the Pentamix™ System from 3M ESPE.

Indications• Crown and bridge impressions• Inlay and onlay impressions• Functional impressions• Veneer impressions• Fixation impressions• Implant impressions


or Pentamix™ 2 Automatic Mixing Unit• Easier to remove for dentist and lab• More pleasant for patient with fresh mint flavour• Fast setting material cuts working and setting times

significantly• Only one viscosity for syringe and tray• For impressions of uncompromising precision due to convincing polyether properties: – Initial hydrophilicity – hydrophilic when it counts – Thixotropy and excellent flow properties – throughout


during working period and less distortions• Reduces the need of costly adjustments, remakes and

retakes• Strongly recommended for Crowns & Bridges for

Lava™ Precision Solutions


Impregum Penta Soft 2:45 min.Impregum Penta Soft Quick max. 1:00 min.

• Oral setting time:Impregum Penta Soft Quick max. 3:00 min.

• Setting time (from begin of mix): Impregum Penta Soft 6:00 min.Impregum Penta Soft Quick max. 4:00 min.

• Disinfection of the impression by 10 min. immersion, e.g. with Impresept™ or a 2% glutaraldehyde solution


P31734 Introductor Kit Impregum Penta Soft for Pentami 31 Base Paste 300 ml, 1 Catalyst 60 ml, 1 Impregum Penta Soft Cartridge, 10 Penta Mixing Tips Red, 1 PentaElastomer Syringe, 1 Bottle Polyether Adhesive 17 ml

31734 Introductor Kit Impregum Penta Soft for Pentami 2(Kit content see Item No. P31734)

P31770 Introductor Kit Impregum Penta Soft Quickfor Pentami 31 Base Paste 300 ml, 1 Catalyst 60 ml, 1 Impregum Penta Soft Quick Cartridge, 10 Penta Mixing Tips Red, 1 Penta Elastomer Syringe, 1 Bottle Polyether Adhesive 17 ml

31770 Introductor Kit Impregum Penta Soft Quickfor Pentami 2(Kit content see Item No. P31770)

Refills

31730 Impregum Penta Soft2 Base Paste, 300 ml each, 2 Catalyst, 60 ml each

31764 Impregum Penta Soft Quick2 Base Paste, 300 ml each, 2 Catalyst, 60 ml each

P3787 1 Impregum Penta Soft Cartridge for Pentamix 3

P3775 1 Impregum Penta Soft Quick Cartridge for Pentamix 3

77787 1 Impregum Penta Soft Cartridge for Pentamix 2

31775 1 Impregum Penta Soft Quick Cartridge for Pentamix 2



Introductor Kit Impregum Penta Soft for Pentami 3





NEWNEW

NEWNEW

NEWNEW

NEWNEW

60




Impregum™ Penta™ L DuoSoft™


Impregum™ L DuoSoft™ QuickPolyether Impression Material “New Generation” polyether precision impression materials (light body) for the 1-step tray/wash technique.For automatic mixing and dispensing in the Pentamix™

System or the Garant™ Dispenser from 3M ESPE.


Product Benefits• Impregum Penta L DuoSoft for automatic mixing

and dispensing with the Pentamix™ 3 or Pentamix™ 2 Automatic Mixing Unit

• Impregum Garant L DuoSoft and Impregum L DuoSoft Quick for mixing and direct application with the Garant™ Dispenser

• Easier to remove for dentist and lab• More pleasant for patient with fresh mint flavour• For impressions of uncompromising precision due to convincing polyether properties: – Initial hydrophilicity – hydrophilic when it counts – Thixotropy and excellent flow properties – throughout


during working period and less distortions• Fast setting material cuts working and setting times

significantly• Reduces the need of costly adjustments, remakes and

retakes• Strongly recommended for Crowns & Bridges for

Lava™ Precision Solutions


Impregum Penta L DuoSoft 3:15 min.Impregum Garant L DuoSoft 2:00 min.Impregum L DuoSoft Quick max. 1:00 min.

• Oral setting time:Impregum L DuoSoft Quick max. 3:00 min.

• Setting time (from begin of mix): Impregum Penta L DuoSoft 6:30 min.Impregum Garant L DuoSoft 5:30 min.Impregum L DuoSoft Quick max. 4:00 min.



P31738 Introductor Kit Impregum Penta H DuoSoftfor Pentami 31 Base Paste 300 ml, 1 Catalyst 60 ml, 1 ImpregumPenta H DuoSoft Cartridge, 10 Penta Mixing Tips Red, 2 Garant Cartridges 50 ml each, 1 Garant Dispenser 1:1/2:1, 10 Garant Mixing Tips White, 10 Garant Intraoral Tips White, 1 Bottle Polyether Adhesive 17 ml

31738 Introductor Kit Impregum Penta H DuoSoftfor Pentami 2(Kit content see Item No. P31738)

P31772 Introductor Kit Impregum Penta H DuoSoft Quickfor Pentami 31 Base Paste 300 ml, 1 Catalyst 60 ml, 1 Impregum Penta H DuoSoft Quick Cartridge, 10 Penta Mixing Tips Red, 2 Garant Cartridges 50 ml each, 10 Garant Mixing Tips White, 10 Garant Intraoral Tips White, 1 Bottle Polyether Adhesive 17 ml

31772 Introductor Kit Impregum Penta H DuoSoft Quickfor Pentami 2(Kit content see Item No. P31772)

Refills

31745 Impregum Penta L DuoSoft1 Base Paste, 300 ml each, 2 Catalyst, 60 ml each

31751 Impregum Garant L DuoSoft4 Garant Cartridges, 50 ml each, 20 Garant Mixing Tips White

31766 Impregum L DuoSoft Quick4 Garant Cartridges, 50 ml each, 20 Garant Mixing Tips White

P3795 1 Impregum Penta L DuoSoft Cartridge for Pentamix 3

77795 1 Impregum Penta L DuoSoft Cartridge for Pentamix 2



NEWNEW

NEWNEW

NEWNEW

Introductor Kit Impregum Penta H DuoSoftfor Pentami 3

61




Impregum™ Penta™ H DuoSoft™

Impregum™ Penta™ H DuoSoft™ QuickPolyether Impression Material

“New Generation” polyether precision impression materials (regular and fast setting version) for the1-step tray/wash technique. For automatic mixing and dispensing in the Pentamix™ System from 3M ESPE.



or Pentamix™ 2 Automatic Mixing Unit• Easier to remove for dentist and lab• More pleasant for patient with fresh mint flavour• For impressions of uncompromising precision due to convincing polyether properties: – Initial hydrophilicity – hydrophilic when it counts – Thixotropy and excellent flow properties – throughout


during working period and less distortions• Fast setting material cuts working and setting times

significantly

• Reduces the need of costly adjustments, remakes and retakes

• Strongly recommended for Crowns & Bridges forLava™ Precision Solutions


Impregum Penta H DuoSoft 2:30 min.Impregum Penta H DuoSoft Quick max. 1:00 min.

• Oral setting time:Impregum Penta H DuoSoft Quick max. 3:00 min.

• Setting time (from begin of mix): Impregum Penta H DuoSoft 6:00 min.Impregum Penta H DuoSoft Quick max. 4:00 min.


Introductor Kit Impregum Penta H DuoSoft for Pentami 3


P31738 Introductor Kit Impregum Penta H DuoSoftfor Pentami 31 Base Paste 300 ml, 1 Catalyst 60 ml, 1 ImpregumPenta H DuoSoft Cartridge, 10 Penta Mixing Tips Red, 2 Garant Cartridges 50 ml each, 1 Garant Dispenser 1:1/2:1, 10 Garant Mixing Tips White, 10 Garant Intraoral Tips White, 1 Bottle Polyether Adhesive 17 ml

31738 Introductor Kit Impregum Penta H DuoSoftfor Pentami 2(Kit content see Item No. P31738)

P31772 Introductor Kit Impregum Penta H DuoSoft Quickfor Pentami 31 Base Paste 300 ml, 1 Catalyst 60 ml, 1 Impregum Penta H DuoSoft Quick Cartridge, 10 Penta Mixing Tips Red, 2 Garant Cartridges 50 ml each, 10 Garant Mixing Tips White, 10 Garant Intraoral Tips White, 1 Bottle Polyether Adhesive 17 ml

31772 Introductor Kit Impregum Penta H DuoSoft Quickfor Pentami 2(Kit content see Item No. P31772)

Refills

31740 Impregum Penta H DuoSoft2 Base Paste, 300 ml each, 2 Catalyst, 60 ml each

31768 Impregum Penta H DuoSoft Quick2 Base Paste, 300 ml each, 2 Catalyst, 60 ml each

P3793 1 Impregum Penta H DuoSoft Cartridge for Pentamix 3

P3773 1 Impregum Penta H DuoSoft Quick Cartridge for Pentamix 3

77793 1 Impregum Penta H DuoSoft Cartridge for Pentamix 2

31773 1 Impregum Penta H DuoSoft Quick Cartridge for Pentamix 2



NEWNEW

NEWNEW

NEWNEW

NEWNEW

62


Impregum™ SoftPolyether Impression Material

Handmix polyether precision impression materialfor the monophase technique.

Indications• Crown and bridge impressions• Inlay and onlay impressions• Functional impressions• Fixation impressions• Implant impressions


31749 Impregum Soft Heav Bod Refill Pack2 base paste heavy-bodied - 120ml each, 2 catalyst heavy-bodied -15ml each, 1 Mixing Pad, 1 Tube key

31750 Impregum Soft Light Bod Refill Pack2 base paste light-bodied - 120ml each, 2 catalyst light - bodied -15ml each, 1 Mixing Pad, 1 Tube key

31755 Impregum Soft Medium Bod Refill Pack2 base paste medium - bodies - 120ml ech, 2 catalyst medium-bodied -15ml each, 1 Mixing Pad, 1 Tube key

30600 Pol ether Adhesive1 Bottle Polyether Adhesive 17 ml



Pentamix™ System

Refill Pack ImpregumTM Soft

63



Pentamix™ System

64

VPSPrecision Impression Materials

Line

rs

Gla

ss Io

nom

er R

esto

rativ

es

Etch

ing

and

Bon

ding

Com

posi

te R

esto

rativ

es

VPS

Prec

isio

n Im

pres

sion

M

ater

ials

Pol

ethe

rPr

ecis

ion

Impr

essi

on

Mat

eria

ls

Prel

imin

ar Im

pres

sion

s an

d B

ite R

egis

trat

ion

65

VPS Precision Impression Materials

Tra MaterialsExpress™ XT Penta™ PuttyExpress™ XT Penta™ H Express™ XT Penta™ H Quick

Wash MaterialsExpress™ XT Light Body QuickExpress™ XT Light Body Express™ XT Regular BodyExpress™ XT Regular Body Quick

Express™ XT Putty SoftExpress™ XT Putty Quick

Express™

Pages 66-73

Related ProductsPentamix™ 3Garant™ AccessoriesImpression Accessories

Tem

pori

atio

n

Infe

ctio

n C

ontr

ol

Loca

l Ane

sthe

tics

Cem

enta

tion

Cro

wns

and

Brid

ges





Bite Registration



Pages 76-80


Dev

ices

, Acc

esso

ries

and

Spar

e Pa

rts

Tempori ation




Pages 84-90


66



Pentamix™ SystemLava™ Precision Solutions, pg. 110-111

Express™ XTVPS Impression Materials

In a variety of viscosities – from putty to light body – Express XT VPS Impression Materials offer essential benefits for the 1-step and 2-step techniques.All Express XT tray materials are automatically mixed in the Pentamix™ System. Also putty users can benefit from automatic mixing.Express XT offers an excellent potential for highly accurate impressions and better fitting restorations – a benefit for dentist, dental technician and patient.

Indications• All precision impressions, e.g. for crowns,

inlays and onlays• Fast setting “Quick” products for 1 or 2 units• Strongly recommended for Crowns & Bridges

for Lava™ Precision Solutions

Product BenefitsOutstanding balance of clinically relevant properties,which can reduce costly retakes, remakes and adjustments:• Outstanding hydrophilicity• Nearly 100% recovery from elongation• Excellent toughness: less tearing upon removal from

mouth and model• Excellent dimensional stability

Highlights at a Glance• For 1-step and 2-step impression techniques• Advanced VPS formula: UCS (Unsaturated

CarboSilane Crosslinkers)• Wash materials: from light to regular body viscosities• Tray and wash materials come in fast and regular

setting version• Tray (heavy body and putty) materials can be

automatically mixed in the Pentamix™ System• Putty handmix materials in a putty soft and a

fast setting version• Wash materials can be automatically mixed in the

Garant™ Dispenser System

67




Product ColorWorking Time at 23 C

min:sec

Intra-oral S ringe Time at 37 C

min:secIntra-oral Setting Time

min:sec

TRAY MATERIALS

Express™ XT Penta™ Putty 1:30 3:00

Express™ XT Penta™ H 2:00 3:30

Express™ XT Penta™ H Quick 1:30 2:30

Express™ XT Putty Soft 2:00 3:30

Express™ XT Putty Quick 1:30 2:30

WASH MATERIALS

Express™ XT Light Body 1:00 3:30

Express™ XT Light Body Quick 0:40 2:30

Express™ XT Regular Body 1:00 3:30

Express™ XT Regular Body Quick 0:40 2:30

Impression Technique Color Tra Material

Recommended Wash Material Color Wash Material

E press XT Penta Putt

2-Step Technique Express™ XT Light Body or Express™ XT Light Body Quick

1-Step Technique Express™ XT Light Body orExpress™ XT Regular Body

E press XT Penta H 2 choices:


E press XT Penta H Quick


1-Step Technique Express™ XT Light Body Quick orExpress™ XT Regular Body Quick

E press XT Putt Soft 2 choices:



E press XT Putt Quick 2 choices:


1-Step Technique Express™ XT Light Body Quick orExpress™ XT Regular Body Quick

or

or

or

or

or

or

or

or

or

E press XT VPS Impression Materials Portfolio Overview

E press XT Impression Materials per Technique

4 choices:

4 choices:

68


Express™ XT Penta™ PuttyVPS Impression Materials


P36998 Introductor Kit E press XT Penta Putt for Pentami 31 Base Paste 300 ml, 1 Catalyst 60 ml, 1 Express XT Penta Putty Cartridge, 10 Penta Mixing Tips Red, 1 Express XT Ultra-Light Body Quick Cartridge 50 ml, 1 Express XT Light Body Flow Quick Cartridge 50 ml, 10 Garant Mixing Tips yellow, 10 Garant Intraoral Tips yellow, 1 VPS Tray Adhesive, 1 Technique card

Refills

36981 E press XT Penta Putt2 Base Paste, 300 ml each, 2 Catalyst, 60 ml each

For wash materials see page 88

VPS impression material for the 1-step or 2-step putty/wash techniques for automatic mixing and dispensing in the Pentamix™ System from 3M ESPE.

Indications• Crown and bridge impressions• Inlay and onlay impressions


or Pentamix™ 2 Automatic Mixing Unit• Real putty consistency• New thermally active putty technology accelerates

setting of wash material without reducing working time in the 1-step technique

• Putty insertion resistance• Excellent detail reproduction• Reproducible working and setting time, with a constant

mix ratio between catalyst and base• Strongly recommended for Crowns & Bridges for Lava™

Precision Solutions

Instructions for use• Express XT impression materials must not be used in

combination with condensation-curing silicones• Working time (including mixing):

Express XT Penta Putty 1:30 min.• Setting time (intraoral):

Express XT Penta Putty 3:00 min.• Disinfection of the impression by 10 min. immersion,




Introductor Kit E press XT Penta Putt Softfor Pentami 3

NEWNEW

69


Express™ XT Penta™ HExpress™ XT Penta™ H QuickVPS Impression Materials

Express XT Penta H (regular setting) and Express XT Penta H Quick (fast setting) heavy body VPS impression materials for the 1-step and 2-step impression techniques. For automatic mixing and dispensing in the Pentamix™

System from 3M ESPE.

Indications• Crown and bridge impressions• Inlay and onlay impressions• Fast setting “Quick” product for 1 or 2 units


or Pentamix™ 2 Automatic Mixing Unit• Hydrophilic heavy body• Suitable for the 1-step technique• Adequate rigidity after setting• Easy removal from the mouth• Regular and fast setting version (ideal for small

restorations with 1 or 2 units)• Recommended for use with Express XT Light Body and

Express Light Body Quick• Can be combined with any VPS wash material from

3M ESPE• Strongly recommended for Crowns & Bridges for Lava™

Precision Solutions



Express XT Penta H 2:00 min.Express XT Penta H Quick 1:15 min.

• Setting time (intraoral):Express XT Penta H 3:30 min.Express XT Penta H Quick 2:30 min.

• Disinfection of the impression by 10 min. immersion e.g. with Impresept™ or a 2% glutaraldehyde solution



Introductor Kit E press XT Penta H for Pentami 3


P36999 Introductor Kit E press XT Penta H for Pentami 31 Base Paste 300 ml, 1 Catalyst 60 ml, 1 Express XTPenta H Cartridge, 10 Penta Mixing Tips Red,1 Express XT Light Body Flow Cartridge 50 ml, 1 Express XT Light Body Standard Cartridge 50 ml, 10 Garant Mixing Tips yellow, 10 Garant Intraoral Tips yellow, 1 VPS Tray Adhesive, 1 Technique card

P36993 Introductor Kit E press XT Penta H Quickfor Pentami 31 Base Paste 300 ml, 1 Catalyst 60 ml, 1 Express XTPenta H Quick Cartridge, 10 Penta Mixing Tips Red, 1 Express XT Light Body Flow Quick Cartridge 50 ml, 1 Express XT Light Body Standard Quick Cartridge 50 ml, 10 Garant Mixing Tips yellow, 10 Garant Intraoral Tips yellow, 1 VPS Tray Adhesive, 1 Technique card

Refills

36984 E press XT Penta H2 Base Paste, 300 ml each, 2 Catalyst, 60 ml each

36994 E press XT Penta H Quick2 Base Paste, 300 ml each, 2 catalyst, 60 ml each

P3985 1 Express XT Penta H Cartridge for Pentamix 3

P3995 1 Express XT Penta H Quick Cartridge for Pentamix 3


NEWNEW

NEWNEW

NEWNEW

NEWNEW

70

Express™ XT Light Body / Quick Express™ XT Regular Body / Quick

VPS Impression Materials

VPS impression material for the two-step putty wash and one-step tray wash techniques for automatic mixing and dispensing in the Garant™ Dispenser from 3M ESPE.

Indications• Crown and bridge impressions

• Inlay and Onlay impressions

• Fast setting Quick products for 1 or 2 units

Product Benefits• Winning balance of clinically relevant properties

• Enhanced hydrophilicy

• Great flow properties

• Sufficient drip resistance

• Outstanding toughness

• Nearly 100% recovery from elongation

• 4 wash materials in the viscosities light and medium, with regular and fast setting versions

• Strongly recommended for your restorations with Lava™ Crowns & Bridges

Instructions for Use• Express XT impression materials must not be used in

combination with condensation-curing silicones

• Syringe time (intraoral): Express XT Light Body 1:00 min. Express XT Light Body Quick 0:40 min. Express XT Regular Body 1:00 min.Express XT Regular Body Quick 0:40 min.

• Setting time (intraoral): Express XT Light Body 3:30 min. Express XT Light Body Quick 2:30 min. Express XT Regular Body 3:30 min.Express XT Regular Body Quick 2:30 min.



Refills

36832 Express XT Light Body 4 Cartridges, 50 ml each, 10 Garant Mixing Tips yellow, 1 Information for Use

36974 Express XT Light Body 2 Cartridges, 50 ml each, 10 Garant Mixing Tips yellow, 1 Information for Use

36833 Express XT Light Body Quick4 Cartridges, 50 ml each, 10 Garant Mixing Tips yellow, 1 Information for Use

36975 Express XT Light Body Quick2 Cartridges, 50 ml each, 10 Garant Mixing Tips yellow, 1 Information for Use

Refill Express™ XT Light Body

NEW

36834 Express XT Regular Body 4 Cartridges, 50 ml each, 10 Garant Mixing Tips yellow, 1 Information for Use

36975 Express XT Regular Body 2 Cartridges, 50 ml each, 10 Garant Mixing Tips yellow, 1 Information for Use

36834 Express XT Regular Body Quick4 Cartridges, 50 ml each, 10 Garant Mixing Tips yellow, 1 Information for Use

36977 Express XT Regular Body Quick2 Cartridges, 50 ml each, 10 Garant Mixing Tips yellow, 1 Information for Use



Pentamix™ SystemExpress™ XT Tray Materials, pg. 68-69

71




Express™ XT Putty SoftExpress™ XT Putty QuickVPS Impression Materials

Handmix VPS impression material for the 1-step and2-step putty/wash techniques.

Indications• Crown and bridge impressions• Inlay and onlay impressions• Fast setting “Quick” product for 1 or 2 units

Product Benefits• Express XT Putty Soft is the ideal choice for the 1-step

technique• Express XT Putty Quick is the ideal material for the

2-step technique• Somewhat lower insertion resistance (Putty Soft)• Lower shore hardness for easier mouth moval

(Putty Soft)• Very good carving properties (Putty Quick)• High insertion pressure and shore hardness

(Putty Quick)



Express XT Putty Soft 2:00 min.Express XT Putty Quick 1:30 min.

• Setting time (intraoral):Express XT Putty Soft 3:30 min.Express XT Putty Quick 2:30 min.

• Disinfection of the impression by 10 min. immersion e.g. with Impresept™ or a 2% glutaraldehyde solution

Introductor Kit E press XT Putt Soft


36996 Introductor Kit E press XT Putt Soft1 Base Paste 300 ml, 1 Catalyst 300 ml, 2 Putty Spoons,1 Express XT Regular Body Cartridge 50 ml, 1 Express XT Light Body Standard Cartridge 50 ml, 10 Garant Mixing Tips yellow, 10 Garant Intraoral Tips yellow, 1 VPS Tray Adhesive, 1 Technique Card

36997 Introductor Kit E press XT Putt Quick1 Base Paste 300 ml, 1 Catalyst 300 ml, 2 Putty Spoons,1 Express XT Light Body Flow Quick Cartridge 50 ml, 1 Express XT Regular Body Quick Cartridge 50 ml, 10 Garant Mixing Tips yellow, 10 Garant Intraoral Tips yellow, 1 VPS Tray Adhesive, 1 Technique Card

Refills

36972 E press XT Putt Soft1 Base Paste 300 ml, 1 Catalyst 300 ml, 2 Putty Spoons

36973 E press XT Putt Quick1 Base Paste 300 ml, 1 Catalyst 300 ml, 2 Putty Spoons


NEWNEW

72


Express™

VPS Impression Material

Handmix VPS impression material for the 1-step and2-step putty/wash technique. The wash materials are for automatic mixing and dispensing in the Garant™

Dispenser from 3M ESPE.

Indications• Crown and bridge impressions• Inlay and onlay impressions

Product Benefits• The putty is easy to mix without streaking• The hydrophilic wash materials are available in

2 viscosities: – Regular set (light body, regular setting) green – Fast set (light body, fast setting) blue – Regular body regular set

(regular body, regular setting) purple• Precise detail reproduction• Good dimensional stability

Instructions for Use• Express impression materials must not be used in

combination with condensation-curing silicones• Working time from start of mixing (23°C):

Express Putty STD regular set 1:30 min.Express Putty fast set 0:30 min.Express light body (green) regular set 1:30 min.Express light body (blue) fast set 1.00 min.Express regular body (purple) regular set 1:30 min.

• Setting (intraoral):Express Putty STD regular set 5:00 min.Express Putty fast set 1:30 min.Express light body (green) regular set 5:00 min.Express light body (blue) fast set 3:30 min.Express regular body (purple) regular set 5:00 min.



7300 Introductor Kit E press2 Jars STD Putty, 305 ml/550 g each, 2 Garant Cartridges regular set, light body (green), 50 ml each, 1 Garant Dispenser, 10 Garant Intraoral Tips yellow, 10 Garant Mixing Tips yellow, 2 Putty Spoons, 1 VPS Tray Adhesive 17 ml

Refills

7302 E press regular setting, light bod (green)2 Cartridges, 50 ml each, 20 Garant Mixing Tips yellow

7301 E press fast setting, light bod (blue)2 Cartridges, 50 ml each, 20 Garant Mixing Tips yellow

7322 E press regular setting, regular bod (purple)2 Cartridges, 50 ml each, 20 Garant Mixing Tips yellow

7312 E press STD Putt regular setting (red)2 Putty Jars, 305 ml/550 g each

6160 J* E press Putt fast setting (green)2 Putty Jars, 305 ml/550 g each

7314 2 Putty Spoons, 1 x Red, 1 x White

* Not available in Switzerland


36979 E press Light Bod Tubes2 tubes 70ml 1 light body catalyst 70mlm 1 IFU

36978 E press Regular Bod Tubes2 tubes 70ml 1 light body catalyst 70mlm 1 IFU


Introductor Kit E press regular set, light bod (green)


Pentamix™ SystemExpress™ XT Penta™ H/-Quick, pg. 69

73


E press AccessoriesItem No. Product Information

7314 2 Putt Spoons1x red, 1x white

Garant Accessories

Color Code Material:Item Number:

50 Mi ing Tips 50 Intraoral Tips

WhitePol ether:• Impregum™ Garant™ L DuoSoft™ / Quick• Permadyne™ Garant™ 2:1

71451 71461N

YellowVPS Vin l Pol silo ane (A-Silicone):• Express™ 2 Washes• Express™ Washes

71452 71462

GreenVPS Vin l Pol silo ane (A-Silicone):• Express™ 2 Heavy Body• Imprint™ Bite

7145071450

71460

Dispenser 1:1 / 2:1 77580

Plunger 1:1 / 2:1 77590

Elastomer S ringe AccessoriesItem No. Product Information

71209 1 Elastomer S ringewith 3 Replacement Tips, 1 Cleaning Brush, 1 Filling Device

Spare Parts

71076 1 Elastomer Screw for Syringe Plungers

71217 1 Filling Device

71225 12 Application Tips Medium Viscosity

71043 1 Knurled Nut

71068 1 Cleaning Brush

71050 1 PTFE Ring, white

MiscellaneousItem No. Product Information

75127 10 Mi ing Bowlsfor Alginate, plastic

75119 10 Mi ing Spatulasfor Alginate, plastic

70128 10 Mi ing Pads, smallfor Impression Materials, 87 x 155 mm, 20 sheets

70190 10 Mi ing Pads, largefor Impression Materials, 125 x 180 mm, 24 sheets

70180 10 Mi ing Pads, e tra largefor Impression Materials, 150 x 240 mm, 34 sheets

70144 10 Mi ing Pads, universalfor Impression Materials, 70 x 80 mm, 60 sheets

70086 10 Mi ing Padsfor Impression Materials, 60 x 75 mm

71233 1 Elastomer Spatula, standard

74

Preliminary Impressions and Bite Registration

Line

rs

Gla

ss Io

nom

er R

esto

rativ

es

Etch

ing

and

Bon

ding

Com

posi

te R

esto

rativ

es

VPS

Prec

isio

n Im

pres

sion

M

ater

ials

Pol

ethe

rPr

ecis

ion

Impr

essi

on

Mat

eria

ls

Prel

imin

ar Im

pres

sion

s an

d B

ite R

egis

trat

ion

75

Automatic Mi ing Unit

Pentamix™ 3

Pol etherPrecision Impression Materials

Tra MaterialsImpregum™ Penta™ SoftImpregum™ Penta™ Soft QuickImpregum™ Penta™ H DuoSoft™

Impregum™ Penta™ H DuoSoft™ QuickImpregum™ Penta™

Impregum™ Soft

Wash MaterialsImpregum™ Penta™ L DuoSoft™


Impregum™ L DuoSoft™ Quick

Pages 56-62

Related ProductsGarant™ AccessoriesImpression AccessoriesImpresept™ Disinfectant





Bite Registration



Pages 76-80


VPS Precision Impression Materials

Tray MaterialsExpress™ XT Penta™ PuttyExpress™ XT Penta™ H Express™ XT Penta™ H Quick

Wash MaterialsExpress™ XT Light Body QuickExpress™ XT Light Body Express™ XT Regular BodyExpress™ XT Regular Body Quick

Express™ XT Putty SoftExpress™ XT Putty Quick

Express™

Pages 66-73

Related ProductsPentamix™ 3Garant™ AccessoriesImpression Accessories

Tem

pori

atio

n

Infe

ctio

n C

ontr

ol

Loca

l Ane

sthe

tics

Cem

enta

tion

Cro

wns

and

Brid

ges

Dev

ices

, Acc

esso

ries

and

Spar

e Pa

rts

76


Position™ Penta™

Position™ Penta™ QuickVPS Alginate Replacement

Innovative VPS material (regular-setting and fast-setting) for all typical alginate indications for automatic mixing and dispensing in the Pentamix™ System from 3M ESPE.

Indications • Preliminary impressions• Provisional crown and bridge impressions• Opposing dentition impressions• Study model impressions• Impressions for orthodontic models• Impressions for bleaching trays and mouthguards• Smooth surface reduces trimming of models and

provisionals


or Pentamix™ 2 Automatic Mixing Unit• Impressive dimensional stability during storage permits

casting at a later point and multiple pouring at any time• May be reused as often as required for making

temporary restorations. No new impression required if temporary restoration is fractured

• Smooth surface for minimal polishing of provisionals• Excellent hygiene• No harmful dust

Instructions for Use• Position Penta/Quick is an addition-cured silicone, and

therefore direct contact with latex gloves should be avoided

• Working time (including mixing):Position Penta 1:30 min.Position Penta Quick 1:10 min.

• Setting time (from begin of mix):Position Penta 3:00 min.Position Penta Quick 2:40 min.



P39084 Introductor Kit Position Penta Quick /Position Tra for Pentami 31 Base Paste 300 ml, 1 Catalyst 60 ml, 1 Position Penta Quick Cartridge, 6 Position Trays

29084 Introductor Kit Position Penta Quick / Position Trafor Pentami 2(Kit content see Item No. P39084)

Refills

29012 Position Penta2 Base Paste, 300 ml each, 2 Catalyst, 60 ml each

29062 Position Penta Quick2 Base Paste, 300 ml each, 2 Catalyst, 60 ml each

P3681 1 Position Penta Cartridge for Pentamix 3

P3691 1 Position Penta Quick Cartridge for Pentamix 3

77681 1 Position Penta Cartridge for Pentamix 2

77691 1 Position Penta Quick Cartridge for Pentamix 2


Introductor Kit Position Penta Quick / Position Trafor Pentami 3


Pentamix™ SystemProtemp™ 4, pg. 84Position™ Tray, pg. 77



NEWNEW

NEWNEW

NEWNEW

77


Position™ TraySingle-Use Tray for Position™ Penta™/Quick

Single-use tray, completes the VPS impression material Position™ Penta™/Quick to make a complete preliminary impressioning system.Position Tray is ideal for all alginate indications and is available in three sizes for both upper and lower jaw.

Indications• Preliminary impressions• Provisional crown and bridge impressions• Opposing dentition impressions• Study model impressions• Impressions for orthodontic models• Impressions for bleaching trays and mouthguards• Smooth surface reduces trimming of models and

provisionals

Product Benefits• Perfect hygiene with no time or money spent on

preparation and cleaning• Good anatomical fit due to CAD/CAM design• Simple choice of trays with a good fit rate in three sizes

for both upper and lower jaw• High auto-retention due to integrated retention fabric• No application of adhesive required• Dorsal blocking is already integrated into the tray design• Additional blocking is not required• Optimum comfort for the patient: palatal collecting

reservoir prevents the material from flowing towards the pharynx

• Integrated flow control optimises the flow and reduces flow tags

• Cleaning the tray and returning it from the laboratory are not required

Instructions for use• Easy to customise with carbide burs• Single sterilisation after fitting is possible• Can also be used with alginates• Can be easily disposed of together with normal waste• Not suitable for precision impressions


Refills

71600 10 Position Trays size S, upper jaw

71601 10 Position Trays size M, upper jaw

71602 10 Position Trays size L, upper jaw

71604 10 Position Trays size S, lower jaw

71605 10 Position Trays size M, lower jaw

71606 10 Position Trays size L, lower jaw



Pentamix™ SystemProtemp™ 4, pg. 84Position™ Penta™/Quick, pg. 76

Refill Position Tra

78


Palgat™ PlusPalgat™ Plus Quick Alginate Impression Material

Alginate with impressive handling characteristicsin practical bags.

IndicationsImpressions for:• Temporary restorations• Study models• Opposing dentitions

Product Benefits• Palgat Plus/Quick is highly elastic and therefore has an

excellent elastic memory• Palgat Plus/Quick impressions can be poured without

pre-treatment with all standard plasters. They are tear-resistant and easy to remove from the mouth, even within undercut areas

• Palgat Plus/Quick is dust-free• Palgat Plus Quick has a high-viscosity formulation for

shortened setting time

Instructions for Use• Mix powder and water to produce a homogeneous paste

with a smooth surface• Working time (including mixing):

Palgat Plus 1:45 min.Palgat Plus Quick 1:15 min.

• Setting time (from begin of mix):Palgat Plus 3:45 min.Palgat Plus Quick 2:45 min.



Special Packs

21540 Palgat Plus14 Bags, 450 g each, 1 Plastic Container, 1 Measuring Set

21550 Palgat Plus Quick14 Bags, 450 g each, 1 Plastic Container, 1 Measuring Set

Giant Packs

21560 Palgat Plus18 Bags, 450 g each, 1 Plastic Container, 1 Measuring Set

21570 Palgat Plus Quick18 Bags, 450 g each, 1 Plastic Container, 1 Measuring Set

Shipping Units

21520 Palgat Plus6 Bags, 450 g each, 6 Plastic Containers, 6 Measuring Sets

21530 Palgat Plus Quick6 Bags, 450 g each, 6 Plastic Containers, 6 Measuring Sets

Refills

75040 1 Measuring Set

75127 10 Mixing Bowls for Alginate

75119 10 Mixing Spatulas for Alginate


Special Pack Palgat Plus Quick

79


Ramitec™ Penta™

Ramitec™

Polyether Bite Registration Material

Polyether impression material for bite registration. Available as handmix version or for automatic mixing and dispensing in the Pentamix™ System from 3M ESPE.

Indications• Bite registration

Product Benefits• Highest possible precision due to the synergy of

polyether properties and perfect mixing• Hydrophilicity ensures excellent flow properties even in

moist environment• Thixotropic, i.e. stable at the teeth, yet does not offer

resistance when jaws are closed• Simple handling: direct filling of the Ramitec syringe

with the Pentamix™ 3 Automatic Mixing Unit; direct application onto the tooth surface

• Easily carved due to high end hardness


Ramitec Penta/Ramitec 2:00 min.• Setting time (from begin of mix):

Ramitec Penta/Ramitec 5:00 min.• Final hardness (from begin of mix):

Ramitec Penta/Ramitec 30:00 min.• Disinfection of the impression by 10 min. immersion,



Refills

33112 Ramitec Penta1 Base Paste 300 ml, 1 Catalyst 60 ml

33710 Ramitec2 Tubes Base Paste, 120 ml each, 2 Tubes Catalyst,15 ml each, 1 Ramitec Application Syringe, 1 Mixing Pad

P3821 1 Ramitec Penta Cartridge for Pentamix 3

77821 1 Ramitec Penta Cartridge for Pentamix 2

72041 5 Ramitec Application Syringes


Refill Pack Ramitec Penta


Pentamix™ System

NEWNEW

80


Imprint™ BiteVPS Bite Registration Material

Very fast-setting VPS impression material for bite registration for automatic mixing and dispensing in the Garant™ Dispenser from 3M ESPE.

Indications• Bite registration

Product Benefits• Very short setting time of only 60 seconds• High ultimate hardness Shore-A 90 for easy cutting• Automatic mixing in the Garant Dispenser

Instructions for Use• Only use Imprint Bite with green Garant Mixing Tips• Working time (including mixing):

Imprint Bite 0:20 min.• Setting time (from begin of mix):

Imprint Bite 1:00 min.• Final hardness (from begin of mix):

Imprint Bite 15:00 min.• Disinfection of the impression by 10 min. immersion,

e.g. with Impresept™ or a 2% glutaraldehyde solutionItem No. Product Information

36890 Introductor Kit2 Garant Cartridges, 50 ml each, 1 Garant Dispenser 1:1/2:1,10 Garant Mixing Tips green, 10 Garant IntraoralTips Bite

36850 Refill Pack4 Garant Cartridges, 50 ml each, 10 Garant Mixing Tips green


Introductor Kit Imprint Bite

“Best of 2004 Preferred Product”


81


82

TemporizationTemporizationLi

ners

Gla

ss Io

nom

er R

esto

rativ

es

Etch

ing

and

Bon

ding

Com

posi

te R

esto

rativ

es

VPS

Prec

isio

n Im

pres

sion

M

ater

ials

Pol

ethe

rPr

ecis

ion

Impr

essi

on

Mat

eria

ls

Prel

imin

ar Im

pres

sion

s an

d B

ite R

egis

trat

ion

83

Tempori ation




Pages 84-90


Cementation

Permanent Luting CementsRelyX™ Unicem™ Aplicap™

RelyX™ Unicem™ Maxicap™

RelyX™ U100RelyX™ Fiber PostRelyX™ VeneerRelyX™ ARCRelyX™ LutingRelyX™ Luting 2

Ketac™ Cem Aplicap™

Ketac™ Cem Maxicap™

Ketac™ Cem EasymixKetac™ Cem radiopaque

Durelon™

Durelon™ Maxicap™

Temporar Luting CementsRelyX™ Temp NE (Non-Eugenol)RelyX™ Temp E (Eugenol)

Pages 94-107

Related ProductsRelyX™ Ceramic PrimerMasking AgentAplicap™/Maxicap™ Accessories

Tem

pori

atio

n

Infe

ctio

n C

ontr

ol

Loca

l Ane

sthe

tics

Cem

enta

tion

Cro

wns

and

Brid

ges





Bite Registration

Ramitec™ (Polyether)Ramitec™ Penta™ (Polyether)


Pages 76-80


Dev

ices

, Acc

esso

ries

and

Spar

e Pa

rts

NEWNEW

NEWNEW

84


Protemp™ 4Temporization Material

Innovative composite material with a new generation of sophisticated fillers for the fabrication of multiple-unit temporary restorations. For easy and hygienic application it can be automatically mixed and dispensed with the Garant™ Dispenser from 3M ESPE.

Indications• Crowns and bridges• Inlays and onlays• Veneers• Lining of preformed temporary crowns • Long-term temporaries• Implant abutments

Product Benefits• New generation of nanotechnology fillers• Reliably strong temporaries due to highest fracture

resistance even under extreme stress• Minimal polymerisation shrinkage: thus highly precise

fit, reduced marginal gap, good protection of the exposed dentin

• Excellent biocompatibility• Low heat generation• Available in 5 fluorescent shades: Bleach, A1, A2,

A3, B3 matched with Filtek™ Supreme XT Flowable Restorative

• High colour stability, virtually no colour change• High surface quality, brilliant and natural gloss without

polishing

Instructions for Use• Prior to each application, extrude a small (pea-sized)

amount of paste from the mixing tip and discard this material

• Load the dried impression or vacuum-formed template in the relevant spaces from bottom up

• Safe removal from the mouth during the gel phase (duration approx. 1 min.)

• Insert the temporary restoration using a temporary cement, like RelyX™ Temp NE (eugenol-free) or RelyX™

Temp E (with eugenol) from 3M ESPE• Easy add-on and individualisation with flowable

composites without bonding step, e.g. with Filtek™

Z350 Flowable Restorative


46953 Introductor Kit A21 Cartridge – 50 ml, A2; 16 Garant Mixing Tips, blue; 1 Garant Dispenser 10:1, Technique Card; Instructions

Refills

46959 Bleach1 Cartridge 50 ml, A2; 16 Garant Mixing Tips, blue

46954 A11 Cartridge 50 ml, A2; 16 Garant Mixing Tips, blue



46960 B31 Cartridge 50 ml, A2; 16 Garant Mixing Tips, blue

Accessories

71453 50 Garant Mixing Tips, blue

77581 1 Garant Dispenser 10:1, complete

77591 1 Garant Plunger 10:1

Introductor Kit Protemp 4


RelyX™ Temp NE, pg. 107RelyX™ Temp E, pg. 107Elipar™ S10, pg. 126

Position™ Penta™, pg. 76Filtek™ Z350 Flowable, pg. 37Sof-Lex™ System, pg. 48-49

NEWNEW

• Working time (incl. mixing): 0:40 min.

• Gel phase (from start of mix): 1:40–2:50 min.

• Setting time (from start of mix): 5:00 min.

85



Protemp™ 4, pg. 84RelyX™ Temp NE, pg. 107RelyX™ Temp E, pg. 107


Protemp™ IIComposite for Temporary Crowns and Bridges

Composite material for temporary restorations in the handmix version.

Indications• Crowns and bridges • Partial crowns• Inlays • Onlays

Product Benefits• High precision fit of the temporary restoration with

exact marginal seal• High dimensional stability • High biocompatibility• Handmix system with acoustic pre-dosage (Protemp II

click sound)

Instructions for Use• Safe removal from mouth during the gel phase

(duration approx. 2 min.)• Cementation, e.g. with eugenol-free temporary

cement RelyX™ Temp NE or eugenol-containingRelyX™ Temp E from 3M ESPE

• Working time (including mixing):Protemp II 2:00 min.

• Setting time (from begin of mix):Protemp II 7:00 min.


Refills

46090 A1 e tra light2 Base Pastes Shade extra light, 28 g each, 1 Double Syringe Catalyst I and II, 2.4 g each, 1 Application Syringe,1 Mixing Pad

46100 A3 light2 Base Pastes Shade light, 28 g each, 1 Double Syringe Catalyst I and II, 2.4 g each, 1 Application Syringe,1 Mixing Pad

46110 B3 ellow2 Base Pastes Shade yellow, 28 g each, 1 Double Syringe Catalyst I and II, 2.4 g each, 1 Application Syringe,1 Mixing Pad

46430 1 Double Syringe Catalyst I and II, 2.4 g each

72070 5 Protemp Application Syringes

Refill Protemp II

86


Protemp™ CrownTemporization Material

Preformed single-unit, malleable, and light-curable temporary composite crown.

IndicationsFabrication of single-unit, custom-fit, short-term temporary restorations chairside including:• Molar• Premolar (Bicuspid)• Canine (Cuspid)• Implant abutments

Product Benefits• Simple – No impression or matrix needed. No hardware

or mix tips. Available in one shade and 9 preformed sizes. Simply select the appropriate size and adapt the crown to its oral environment. Then light cure, polish and cement using standard temporary cements

• Fast – Reduce fabrication time up to 50% for single-unit temporary crowns (4 minutes or less)

• Strong – Tests prove high compressive, tensile and flexural strength as well as high toughness values

• Esthetic – With tooth-coloured shade and preformed anatomical shape it provides natural-looking esthetics. Can be customized and/or repaired using a conventional flowable restorative or composite material and can be polished to a shiny tooth-like appearance

Instructions for Use• Size selection and crown preparation• Trimming and adaptation of crown• Light curing• Finishing and polishing• Temporary cementation


50600TK Trial Kit16 Temporary Crowns in the Sizes: Molar Upper Large (3 x),Molar Upper Small (3 x), Molar Lower Large (2 x), Molar Lower Small (2 x), Bicuspid (Premolar) Upper Large (2 x), Bicuspid (Premolar) Upper Small (2 x), Bicuspid (Premolar) Lower (2 x), 10 Crown Size Tools, 1 Technique Guide

Refills

50610 Molar Upper Large5 Temporary Crowns, 1 Crown Size Tool

50611 Molar Upper Small5 Temporary Crowns, 1 Crown Size Tool

50612 Molar Lower Large5 Temporary Crowns, 1 Crown Size Tool

50613 Molar Lower Small5 Temporary Crowns, 1 Crown Size Tool

50614 Bicuspid (Premolar) Upper Large5 Temporary Crowns, 1 Crown Size Tool

50615 Bicuspid (Premolar) Upper Small5 Temporary Crowns, 1 Crown Size Tool

50616 Bicuspid (Premolar) Lower5 Temporary Crowns, 1 Crown Size Tool

50617 Cuspid (Canine) Large5 Temporary Crowns, 1 Crown Size Tool

50618 Cuspid (Canine) Small5 Temporary Crowns, 1 Crown Size Tool

Crown Instruments see page 110

Promotional Kit Protemp Crown

NEWNEW


50600SAM Promotional Kit contains:1 Introductor Kit (50600) + 1 Refill (50613) 42 Temporary Crowns in the Sizes: Molar Upper Large (6 x),Molar Upper Small (6 x), Molar Lower Large (6 x), Molar Lower Small (6 x), Bicuspid (Premolar) Upper Large (4 x), Bicuspid (Premolar) Upper Small (4 x), Bicuspid (Premolar) Lower (4 x), Cuspid (Canine) Large (3 x), Cuspid (Canine) Small (3 x), 2 x Crown Size Tools (10 pcs. each), 1 Crown Drawer, Crown Drawer Labels, 1 Technique Guide; 5 Temporary Crowns Molar Lower Small, 1 Crown Size Tool


RelyX™ Temp NE, pg. 107Filtek™ Z350 XT Flowable, pg. 37Protemp™ 4, S. 84

Sof-Lex™ System, pg. 48–49Elipar™ S10, pg. 126


87


Iso-Form™ CrownsTemporary Crowns for Molars and Bicuspid

Indications• Temporary crowns for adult posterior applications

Product Benefits• Preformed occlusal anatomy• Tissue compatibility• High purity tin-silver alloy with hardened occlusal

surface• Prefinished and belled to save placement time

Product InformationIntroductor Kit for BicuspidsBC 64 Set with 64 Crowns, 2 Crowns per size: 1 Crown per size: 1 Measuring Gage L-42, L-43, L-44, L-45, L-46, L-47 U-49, U-41, U-40, U-48 1 Strech Block L-52, L-53, L-54, L-55, L-56, L-57 U-59, U-51, U-50, U-58 U-42, U-43, U-44, U-45, U-46, U-47 L-49, L-41, L-40, L-48 U-52, U-53, U-54, U-55, U-56, U-57 L-59, L-51, L-50, L-58

Refills Bicupids*: 2 Crowns of one si e per bo1st Upper Left 1st Upper Right

U-41 U-43 U-45 U-47 U-49 U-40 U-42 U-44 U-46 U-486.4 6.9 7.3 7.7 8.5 6.4 6.9 7.3 7.7 8.5

2nd Upper Left 2nd Upper RightU-51 U-53 U-55 U-57 U-59 U-50 U-52 U-54 U-56 U-586.0 6.7 7.1 7.5 8.0 6.0 6.7 7.1 7.5 8.0

1st Lower Left 1st Lower RightL-41 L-43 L-45 L-47 L-49 L-40 L-42 L-44 L-46 L-486.6 7.0 7.4 7.8 8.5 6.6 7.0 7.4 7.8 8.5

2nd Lower Left 2nd Lower RightL-51 L-53 L-55 L-57 L-59 L-50 L-52 L-54 L-56 L-586.8 7.2 7.6 8.2 9.0 6.8 7.2 7.6 8.2 9.0

Introductor Kit for Molars:MC 64 Set with 64 Crowns, 2 Crowns per size: 1 Crown per size: 1 Measuring Gage L-62, L-63, L-64, L-65, L-66, L-67 L-60, L-61, L-68, L-69 1 Strech Block L-72, L-73, L-74, L-75, L-76, L-77 L-70, L-71, L-78, L-79 U-62, U-63, U-64, U-65, U-66, U-67 U-60, U-61, U-68, U-69 U-72, U-73, U-74, U-75, U-76, U-77 U-70, U-71, U-78, U-79

Refills Molar*: 5 Crowns of one si e per bo1st Upper Left 1st Upper Right

U-61 U-63 U-65 U-67 U-69 U-60 U-62 U-64 U-66 U-6810.3 10.7 11.1 11.5 12.0 10.3 10.7 11.1 11.5 12.0

2nd Upper Left 2nd Upper RightU-71 U-73 U-75 U-77 U-79 U-70 U-72 U-74 U-76 U-789.0 9.5 9.9 10.2 10.5 9.0 9.5 9.9 10.2 10.5

1st Lower Left 1st Lower RightL-61 L-63 L-65 L-67 L-69 L-60 L-62 L-64 L-66 L-6811.1 11.4 11.7 12.0 12.4 11.1 11.4 11.7 12.0 12.4

2nd Lower Left 2nd Lower RightL-71 L-73 L-75 L-77 L-79 L-70 L-72 L-74 L-76 L-789.8 10.4 10.8 11.2 11.6 9.8 10.4 10.8 11.2 11.6* Minimum amount to be ordered by channel partners: 5 Refills


Crown Instruments, pg. 90Protemp™ 4, pg. 84RelyX™ Temp NE, pg. 107

RelyX™ Temp E, pg. 107

Introductor Kit Iso-Form Crowns

88


Polycarbonate CrownsTemporary Crowns for Anteriors and Bicuspid

Indications• Temporary crowns for anterior and bicuspid restorations

Product Benefits• Micro glass fibre reinforced • Slightly translucent, tooth-coloured• Easily scissor-trimmed, contoured, crimped and polished• Mould guides for 60 crown sizes

Introductor Kit Pol carbonate Crowns

Product Information

Introductor KitC-180 Set with 180 Crowns, 2 Crowns of each size, Mold Guides for 60 crown sizes

Refills: 5 crowns of one si e per bo

Upper Right Central Upper Left Central

14.0 13.0 12.2 11.4 11.0 10.8 10.7 Length mm 10.7 10.8 11.0 11.4 12.2 13.0 14.0

10.1 9.4 8.9 8.4 8.2 8.0 7.7 Width mm 7.7 8.0 8.2 8.4 8.9 9.4 10.1

100 101 10 11 12 13 14 Item number 15 16 17 18 19 102 103

Upper Right Lateral Upper Left Lateral

11.5 10.9 10.5 10.0 9.5 8.5 Length mm 8.5 9.5 10.0 10.5 10.9 11.5

7.6 7.1 7.0 6.5 6.4 5.8 Width mm 5.8 6.4 6.5 7.0 7.1 7.6

2 20 21 22 23 24 Item number 25 26 27 28 29 200

Lower Anterior long Lower Anterior short

12.3 11.3 11.1 10.5 9.9 Length mm 8.0 8.5 9.1 9.6 10.4

6.3 5.8 5.6 5.4 5.2 Width mm 4.9 5.1 5.3 5.7 5.8

60 61 62 63 64 Item number 65 66 67 68 69

Right Cuspid (Upper & Lower) Left Cuspid (Upper & Lower)

13.0 12.4 11.9 11.5 11.0 10.7 10.4 Length mm 10.4 10.7 11.0 11.5 11.9 12.4 13.0

9.0 8.6 8.3 8.1 7.8 7.7 7.5 Width mm 7.5 7.7 7.8 8.1 8.3 8.6 9.0

300 301 30 31 32 33 34 Item number 35 36 37 38 39 302 303

1st Bicuspid 2nd Bicuspid

9.9 9.2 8.9 8.6 8.1 Length mm 10.1 9.8 9.3 8.9 8.4

7.2 6.9 6.8 6.5 6.2 Width mm 7.5 7.2 6.9 6.8 6.4

40 41 42 43 44 Item number 50 51 52 53 54

* Minimum amount to be ordered by channel partners: 5 Refills


Crown Instruments, pg. 90Protemp™ 4, pg. 84RelyX™ Temp NE, pg. 107

RelyX™ Temp E, pg. 107

89


Stainless Steel CrownsStainless Steel Crowns for Permanent and Primary Molars

Indications• Long-term restoration of primary molars• Temporary and interim restorations of permanent

molars

Product Benefits• Pre-trimmed, belled and crimped to save placement time• Requires minimal adjustment for fast and easy

placement• Accurately duplicates anatomy for better fit and

performance• Offers superior longevity compared to multi-surface

amalgam fillingsIntroductor Kit Stainless Steel Crowns

Product Information

Introductor Kit for Primar MolarsND-96 Set with 96 Crowns, 2 Crowns of each size

Reading E ample: 1st Upper Left

Item number D-UL-2 D-UL-3 D-UL-4 D-UL-5 D-UL-6 D-UL-7

Diameter mesial-distal 7.2 7.6 8.0 8.4 8.8 9.2

Refills Primar Molars*: 2 Crowns of one si e per bo

1st Upper Left 1st Upper Right

D-UL-2 D-UL-3 D-UL-4 D-UL-5 D-UL-6 D-UL-7 D-UR-2 D-UR-3 D-UR-4 D-UR-5 D-UR-6 D-UR-7

7.2 7.6 8.0 8.4 8.8 9.2 7.2 7.6 8.0 8.4 8.8 9.2

2nd Upper Left 2nd Upper Right

E-UL-2 E-UL-3 E-UL-4 E-UL-5 E-UL-6 E-UL-7 E-UR-2 E-UR-3 E-UR-4 E-UR-5 E-UR-6 E-UR-7

9.2 9.6 10.0 10.4 10.8 11.2 9.2 9.6 10.0 10.4 10.8 11.2

1st Lower Left 1st Lower Right

D-LL-2 D-LL-3 D-LL-4 D-LL-5 D-LL-6 D-LL-7 D-LR-2 D-LR-3 D-LR-4 D-LR-5 D-LR-6 D-LR-7

7.3 7.7 8.1 8.5 8.9 9.3 7.3 7.7 8.1 8.5 8.9 9.3

2nd Lower Left 2nd Lower Right

E-LL-2 E-LL-3 E-LL-4 E-LL-5 E-LL-6 E-LL-7 E-LR-2 E-LR-3 E-LR-4 E-LR-5 E-LR-6 E-LR-7

9.4 9.8 10.2 10.6 11.0 11.4 9.4 9.8 10.2 10.6 11.0 11.4

Introductor Kit for Permanent Molars

PO-96 Set with 96 Crowns, 4 Crowns of each size

Refills Permanent Molars*: 5 Crowns of one si e per bo

Upper Left Upper Right

6-UL-2 6-UL-3 6-UL-4 6-UL-5 6-UL-6 6-UL-7 6-UR-2 6-UR-3 6-UR-4 6-UR-5 6-UR-6 6-UR-7

10.7 11.1 11.5 11.9 12.3 12.8 10.7 11.1 11.5 11.9 12.3 12.8

Lower Left Lower Right

6-LL-2 6-LL-3 6-LL-4 6-LL-5 6-LL-6 6-LL-7 6-LR-2 6-LR-3 6-LR-4 6-LR-5 6-LR-6 6-LR-7

10.8 11.2 11.6 12.0 12.4 12.8 10.8 11.2 11.6 12.0 12.4 12.8

* Minimum amount to be ordered by channel partners: 5 Refills


Ketac™ Cem Cements, pg. 103-105Crown Instruments, pg. 90RelyX™ Temp NE, pg. 107

RelyX™ Temp E, pg. 107Protemp™ 4, pg. 84

90


Crown Instruments

Crown ScissorsScissors for trimming the margins of• Stainless steel crowns• Temporary crowns


Refills

801202 1 Curved Crown Scissor

801203 1 Curved Festooning Scissor

Crown Crimping PliersCrown crimping plier for use at the cervical margin for• Stainless steel crowns • Temporary crowns

Crown Contouring PlierCrown contouring plier for the formation of contact points and cervical margins for• Stainless steel crowns • Temporary crowns


Refills

800417 1 Crown Crimping Plier

800112 1 Crown Contouring Plier

No. 800112

No. 800417

No. 801202

No. 801203


Stainless Steel Crowns, pg. 89Iso-Form™ Crowns, pg. 87Polycarbonate Crowns, pg. 88

Protemp™ Crowns, pg. 86

91


92

CementationLi

ners

Gla

ss Io

nom

er R

esto

rativ

es

Etch

ing

and

Bon

ding

Com

posi

te R

esto

rativ

es

VPS

Prec

isio

n Im

pres

sion

M

ater

ials

Pol

ethe

rPr

ecis

ion

Impr

essi

on

Mat

eria

ls

Prel

imin

ar Im

pres

sion

s an

d B

ite R

egis

trat

ion

93

Cementation

Permanent Luting CementsRelyX™ Unicem™ Aplicap™






Durelon™



Pages 94-107


Crowns & Bridges

Lava™

Lava™ CeramLava™ Scan ST

Pages 110-114

Tem

pori

atio

n

Infe

ctio

n C

ontr

ol

Loca

l Ane

sthe

tics

Cem

enta

tion

Cro

wns

and

Brid

ges

Dev

ices

, Acc

esso

ries

and

Spar

e Pa

rts

Tempori ation




Pages 84-90


94


Rel XTM UnicemTM Rel XTM Veneer Rel XTM ARC Rel XTM Luting Rel XTM Temp E Rel XTM Temp NE

Self-Adhesive Universal Resin Cement

Veneer Cement Adhesive Resin Cement

Luting Cement Temporary Cement with Eugenol

Temporary Cement without Eugenol

Classification Permanent Cements Permanent Cements Permanent Cements Permanent Cements Temporary Cements Temporary Cements

Metal/Porcelain, fused of metal

Inlays / Onlays —

Crowns —

Bridges —

Endodontic Posts — — —

Maryland bridges — — — — —

Porcelain / Ceramic

Crowns — —

Bridges — —

Inlays / Onlays — —

Veneers — — — — —

Zirconia / Alumina

Crowns —

Bridges —


Composite

Crowns — —


Endodontics

Posts* — — — —

Temporar C&B — — — —

Recommended product. Specifically designed to fit needs of respective application. Secondary recommendation.

– Not recommended, i.e. application not possible.* We recommend RelyX Fiber Post, a strong post that is securely bonded with RelyX UnicemTM Cement.

The RelyX™ FamilyEasy to Use. Easy to Choose. – The RelyX TM Cement Family.

With the RelyX cement family 3M ESPE offers one of the most comprehensive product lines of easy-handling, high quality products on the cement market.

The RelyX family embraces the complete range of luting cements: RelyX™ Unicem™, RelyX™ ARC, RelyX™

Luting, RelyX™ Veneer for permanent cementation, up to RelyX™ Temp E and NE for temporary cementation. The newest member of this is the self-adhesive universal resin cement RelyX Unicem™, which sets a new standard in ease-of-use and reliability.The family is completed by 3M ESPE’s RelyX™ Ceramic Primer for ceramic restorations.

The RelyX cements are characterized by an outstanding high quality. It is easy to find the suitable luting cement for each case of treatment.

The cements are distinguished by• Precise and accurate dosage systems• Constant working and setting times• Easy excess removal

95



RelyX™ Veneer Cement, pg. 99RelyX™ Ceramic Primer, pg. 100RelyX™ Fiber Post, pg. 98

RelyX™ U100, pg. 97RotoMix™, pg. 128CapMix™, pg. 128

RelyX™ Unicem™ Aplicap™


Self-adhesive universal resin cement in the Aplicap™


Indications• Permanent cementation of inlays, onlays, crowns and

bridges made of – Metal or porcelain-fused to metal – All-alumina or all-zirconia strengthened core ceramic

systems (e.g. Lava™ Crowns & Bridges) – Composite, porcelain or all-ceramic • Permanent cementation of endodontic posts made of

metal, reinforced composite or all-zirconia

Product Benefits• No pre-treatment such as etching, priming or bonding

necessary• Self-adhesive with high bond strength• Indicated for all restoration materials• Very low risk of post-operative sensitivity• Radiopaque• Dual-curing• Release of fluoride ions• Available in 5 shades• Our Aplicap™ System offers simple handling, consistent


Instructions for Use• Mixing time

RotoMix™: 0:10 min.CapMix™: 0:15 min.

• Working time (including mixing): RelyXTM UnicemTM AplicapTM 2:00 min.

• Light curing:Single surface 0:20 min.Each additional surface 0:20 min.

• Dark curing (from begin of mix):Begin of polymerization:RelyXTM UnicemTM AplicapTM 2:00 min.End of polymerization:RelyXTM UnicemTM AplicapTM 5:00 min.


56828 Trial Pack20 Capsules assorted in the Shades A2 Universal (10), Translucent (6), A3 Opaque (4)

56829 Trial Kit20 Capsules assorted in the Shades A2 Universal (10), Translucent (6), A3 Opaque (4), Aplicap Activator, Aplicap Applier

56814 Introductor Kit50 Capsules assorted in the Shades A2 Universal (24), Translucent (16), A3 Opaque (10), Aplicap Activator,Aplicap Applier

Refills

56815 50 Capsules assorted in the Shades A2 Universal (24),Translucent (16), A3 Opaque (10)

56816 50 Capsules, Shade Translucent

56817 50 Capsules, Shade A3 Opaque

56818 50 Capsules, Shade A2 Universal


56820 20 Capsules, Shade White Opaque



37160 1 Combi Pack Aplicap Activator /Applier

Introductor Kit Rel X Unicem Aplicap


2009

Top Self-adhesiveResin Cement

96




Self-adhesive universal resin cement in the Maxicap™


Indications• Ideally suited for multiple unit bridges• Permanent cementation of inlays, onlays, crowns and

bridges made of – Metal or porcelain-fused to metal – All-aluminia or all-zirconia strengthened core ceramic

systems (e.g. Lava™ Crowns & Bridges) – Composite, porcelain or all-ceramic • Permanent cementation of endodontic posts made of


Product Benefits• No pre-treatment such as etching, priming or bonding

necessary• Self-adhesive with high bond strength• Indicated for all restoration materials• Very low risk of post-operative sensitivity• Radiopaque• Dual-curing• Release of fluoride ions• Available in 3 shades• Our Maxicap™ System offers simple handling,

consistent working properties and reliable quality

Instructions for Use• Mixing time

RotoMix™: 10 secs.CapMix™: 15 secs.

• Working time (including mixing): RelyX™ Unicem™ Maxicap™ 2:30 min.

• Light curing:Single surface 20 secs.Each additional surface 20 secs.

• Dark curing (from begin of mix):Begin of polymerization:RelyX™ Unicem™ Maxicap™ 2:30 min.End of polymerization:RelyX™ Unicem™ Maxicap™ 6:00 min.


56830 Introductor Kit20 Capsules assorted in the Shades A2 Universal (10), Translucent (6), A3 Opaque (4), Maxicap Activator,Maxicap Applier

Refills

56831 20 Capsules assorted in the Shades A2 Universal (10), Translucent (6), A3 Opaque (4)

56832 20 Capsules, Shade Translucent

56833 20 Capsules, Shade A3 Opaque

56834 20 Capsules, Shade A2 Universal



37180 1 Combi Pack Maxicap Activator /Applier

Introductor Kit Rel X Unicem Ma icap


RelyX™ Veneer Cement, pg. 99RelyX™ Ceramic Primer, pg. 100RelyX™ Unicem Aplicap™, pg. 95

RelyX™ U100, pg. 97RotoMix™, pg. 128CapMix™, pg. 128


2009


97



RelyX™ Unicem Aplicap™, pg. 95RelyX™ Unicem Maxicap™, pg. 96RelyX™ Veneer, pg. 99


RelyX™ U100 Self-Adhesive Universal Resin Cement

Self-adhesive universal resin cement in the Clicker™

Dispenser from 3M ESPE.



systems (e.g. Lava™ Crowns & Bridges) – Composite, porcelain or all-ceramic• Permanent cementation of endodontic posts made of


Product Benefits• Faster, easier mixing and dispensing – with accurate

reproducible dosing from the award-winningClicker™ Dispenser from 3M ESPE

• No pre-treatment such as etching, priming and bonding necessary

• Self-adhesive with high bond strength• Indicated for all restoration materials• Very low risk of post-operative sensitivity• Consistent mixing ratios• Paste-paste formulation for easy mixing• Available in 3 shades• Dual-curing

Instructions for Use• Mixing 20 secs.

Working time from start of mixing 2:00 min.• Light curing:

single surface, from occlusal 20 secs.any other surface additional 20 secs.

• Self-curing:Polymerization start after start of mixing 2:00 min.Setting time after start of mixing 5:00 min.


Single Packs

56839 1 Clicker Dispenser 11 g*, Shade Translucent, 1 Mixing Pad

56840 1 Clicker Dispenser 11 g*, Shade A2 Universal,1 Mixing Pad

56841 1 Clicker Dispenser 11 g*, Shade A3 Opaque, 1 Mixing Pad

* Dispensed in 80 clicks (approx. 40 applications)

Single Pack Rel X U100 Clicker


* THE DENTAL ADVISOR (23-04/2007)** THE DENTAL ADVISOR (01/2009)

2009


98


RelyX™ Fiber PostGlass Fiber Post


56860 Intro Kit1 Box with 5 Posts of each size: 1 (1.3 mm dia),2 (1.6 mm dia) and 3 (1.9 mm dia), 4 Drills Sizes 1, 2 and 3,1 Universal Drill, 20 Elongation Tips

56868 Combination Kit1 Box with 5 Posts of each size: 1 (1.3 mm dia),2 (1.6 mm dia) and 3 (1.9 mm dia), 4 Drills Sizes 1, 2 and 3,1 Universal Drill, 20 Elongation Tips20 RelyX Unicem Aplicaps assorted in the Shades A2 Universal (10), Translucent (6), A3 Opaque (4),1 Aplicap Activator, 1 Aplicap Applier

Refills

56861 10 Posts Size 1 (1.3 mm dia), 10 Elongation Tips



56864 1 Drill Size 1 (1.3 mm dia), Yellow

56865 1 Drill Size 2 (1.6 mm dia), Red

56866 1 Drill Size 3 (1.9 mm dia), Blue

56867 1 Universal Drill

77550 10 RelyX Unicem Aplicap Elongation Tips

Combination Kit Rel X Fiber Post


RelyX™ Unicem Aplicap™, pg. 95

Translucent glass-fiber reinforced composite root post with RelyX™ Unicem Aplicap™ Elongation Tip for easy application into root canal. Now with improved radiopacity.

Indications• In case of insufficient residual tooth structure (< 4 mm)• The post is needed to support and secure the coronal

restoration

Product Benefits• Greater fatigue resistance than many other leading

fiber posts• RelyX Unicem Aplicap Elongation Tip allows for easy,

time-saving and virtually void-free cementation• Esthetic due to transluceny• No risk of corrosion like with metal posts• Available in 3 sizes and color-coded for easy

identification• The perfect match with RelyX™ Unicem Aplicap™

• No pretreatment of post necessary when cementedwith RelyX Unicem

Instructions for Use• RelyX Unicem Elongation Tips can only be used with

RelyX Unicem Aplicap• RelyX Unicem Elongation Tips reaches inside the root

canal to fill it with cement from the bottom to the top


Posts

Drills

Rel X Unicem Aplicapwith Elongation Tips

99



RelyX™ Ceramic Primer, pg. 100RelyX™ ARC, pg. 100

RelyX™ Veneer Veneer Cement

Light curing composite cement for veneers.

Indications• Permanent cementation of porcelain, ceramic and

composite veneers

Product Benefits• Optimal color match of the water-soluble Try-In pastes

to the cured cement shade • Excellent color stability• Optimal viscosity of the cement for easy insertion and

definite positioning of the veneer• Easy to dispense, apply, seat and clean up

Instructions for Use• Shade selection by insertion of veneer with Try-In Paste• Removal of Try-In Paste with water spray• Light-curing after insertion of the veneer with cement of

identical shade


8713 Introductor Kit 5 Try-In Paste (Translucent, White-Opaque, A1/Light Yellow, A3 Opaque/Yellow Opaque, A5/Dark, B0.5/White), 2 g each, 5 Cement Syringes (Translucent, White-Opaque,A1/Light Yellow, A 3 Opaque/Yellow Opaque, B0.5/White), 3 g each,1 Syringe Scotchbond Etchant, 3 ml, 1 Bottle RelyX Ceramic Primer, 5 ml, 1 Adper Single Bond 2 Adhesive, 6 ml

Refills

8714TR 1 Cement Syringe 3 g, Shade Translucent

8714WO 1 Cement Syringe 3 g, Shade White Opaque

8714A1 1 Cement Syringe 3 g, Shade A1/Light Yellow

8714A3 1 Cement Syringe 3 g, Shade A3 Opaque/Yellow Opaque

8714B0.5 1 Cement Syringe 3 g, Shade B0.5/White

7614TRT 1 Try-In Paste 2 g, Shade Translucent

7614WOT 1 Try-In Paste 2 g, Shade White Opaque

7614A1T 1 Try-In Paste 2 g, Shade A1/Light Yellow

7614A3T 1 Try-In Paste 2 g, Shade A3 Opaque/Yellow Opaque

7614B0.5T 1 Try-In Paste 2 g, Shade B0.5/White

Introductor Kit Rel X Veneer



100


RelyX™ ARCAdhesive Resin Cement

Luting composite in Clicker™ Dispenser from 3M ESPE.



systems (e.g. Lava™ Crowns & Bridges) – Composite, porcelain or all-ceramic• Permanent cementation of Maryland bridges• Permanent cementation of endodontic posts made of




• High bond strength• Easy excess removal • Dual-curing• Low film thickness (12 m)

Instructions for Use• Mixing time:

RelyX ARC 10 secs.• Light curing time:

RelyX ARC 40 secs.


3415 Introductor Kit1 Clicker 4.5 g, Shade A1, 1 Clicker 4.5 g, Shade A3, 1 Adper Single Bond 2 Adhesive, 6 ml, 2 Scotchbond Etching Gel in Syringe, 3 ml each, 1 Ceramic Primer, 5 ml, Accessories

Refills

3415 A1 1 Clicker 4.5 g, Shade A1

3415 A3 1 Clicker 4.5 g, Shade A3

Introductor Kit Rel X ARC


RelyX™ Unicem, pg. 95-97RelyX™ Veneer Cement, pg. 99

RelyX™ Ceramic PrimerSilane Coupling Agent


2721 1 Ceramic Primer, 5 ml

Indications• Silaniziation of ceramic or metal restorations before cementation• Silanization of ceramic or metal during repairs of ceramic works• Chairside repairs of damaged ceramic crowns and blends

Product Benefits• Enhances bonds to porcelain ceramic, composite and metal surfaces

for improved performance• Easy and simple handling

Instructions for Use• Apply RelyX Ceramic Primer onto abraded, etched ceramic surface• Dry with oil-free air or by complete evaporation

Rel X Ceramic Primer

101



Ketac™ Cem Easymix, pg. 104Ketac™ Cem radiopaque, pg. 105RelyX™ Luting, pg. 102

RelyX™ Unicem, pg. 95-97

RelyX™ Luting 2Luting Cement

Resin-modified glas ionomer luting Cement in the Clicker™ Dispenser from 3M ESPE.



systems (e.g. Lava™ Crowns & Bridges) • Permanent cementation of endodontic posts and

orthodontic appliances made of metal



• Sustained fluoride release• Radiopaque• Very low post-operative sensitivity• Consistent mixing ratios• Paste-paste formulation for easy mixing• Low solubility• Low film thickness• Easy excess removal

Instructions for Use• Mixing time:

RelyX Luting 2 20 secs.• Working time (including mixing):

RelyX Luting 2 2:50 min.• Setting time (from begin of mix):

RelyX Luting 2 5:00 min.


3525TKA Trial Kit 1 Clicker Dispenser 11 g, 1 Mixing Pad

3525A Refill2 Clicker Dispenser, 11 g each, 1 Mixing Pad

Trial Kit Rel X Luting 2

Convenient delivery from the Clicker™ Dispenserfor 1:1 dosing and easy mixing.* THE DENTAL ADVISOR (21-06/2004)

(Evaluated under the US Brand RelyX™ Luting Plus)** THE DENTAL ADVISOR (2008)

102



RelyX™ Unicem, pg. 95–97RelyX™ Luting 2, pg. 101

RelyX™ LutingLuting Cement

A resin-modified glass ionomer permanent cement that is fast-setting, strong and easy to use.




orthodontic appliances made of metal

Product Benefits• Low solubility• Fluoride release• Radiopaque• Easy excess removal

Instructions for Use• Easy excess removal from the margins after 3 minutes

only • Working time (including mixing):

RelyX Luting 2:30 min. (depending on ratio powder/ liquid)


3505 Introductor Kit1 Powder 16 g, 1 Liquid 9 ml, 1 Measuring Spoon,2 Mixing Pads

Refills

3505 P 1 Powder 16 g

3505 L 1 Liquid 9 ml

Introductor Kit Rel X Luting

103



Ketac™ Cem Easymix, pg. 104Ketac™ Cem radiopaque, pg. 105RelyX™ Luting 2, pg. 101

RelyX™ Unicem, pg. 95-97RotoMix™, pg. 128CapMix™, pg. 128



Glass Ionomer Luting Cement

Glass ionomer luting cement in the Aplicap™ or Maxicap™





orthodontic appliances made of metal • Cavity Lining

Product Benefits• Fluoride release• Radiopaque• Our Aplicap/Maxicap System offers simple handling,


Instructions for Use• During activating, push activator lever down • Keep lever in this position for at least 2 sec.• After mixing apply directly with the applier• Mixing time:

RotoMix™ 8 secs.CapMix™ 10 secs.

• Working time (including mixing): Ketac Cem Aplicap 3:00 min.Ketac Cem Maxicap 3:00 min.

• Setting time (from begin of mix):Ketac Cem Aplicap 7:00 min.Ketac Cem Maxicap 7:00 min.


56053 Introductor Kit Ketac Cem Aplicap50 Capsules, 1 Aplicap Activator, 1 Aplicap Applier

56015 Introductor Kit Ketac Cem Ma icap50 Capsules, 1 Maxicap Activator, 1 Maxicap Applier

Refills

56060 50 Aplicap Capsules

56020 50 Maxicap Capsules



37160 1 Combi Pack Aplicap Activator /Applier



37180 1 Combi Pack Maxicap Activator /Applier

Introductor Kit Ketac Cem Aplicap

104



Ketac™ Cem radiopaque, pg. 105Ketac™ Cem Aplicap™ /Maxicap™, pg. 103

RelyX™ Unicem, pg. 95-97RelyX™ Luting 2, pg. 101

Ketac™ Cem EasymixGlass Ionomer Luting Cement




orthodontic appliances made of metal • Cavity lining

Product Benefits• Granula formulation for easy mixing• Exact dosage without residual dust• Low film thickness• Radiopaque• Fluoride release


Ketac Cem Easymix 3:10 min.• Setting time (from begin of mix):

Ketac Cem Easymix 7:00 min. Item No. Product Information

56900 Introductor Kit1 Powder 30 g, 1 Liquid 12 ml, 1 Mixing Pad

Refills

56902 1 Powder 30 g, 1 Spoon

56904 1 Liquid 12 ml, 1 Dropper

56906 Triple Pack 3 Powder, 30 g each, 3 Liquid, 12 ml each, 3 Dropper, 1 Spoon, 1 Mixing Pad

56908 Trial Pack 1 Powder 15 g, 1 Liquid 12 ml, 1 Dropper, 1 Spoon

Introductor Kit Ketac Cem Eas mi

105



Ketac™ Cem Easymix, pg. 104Ketac™ Cem Aplicap™ /Maxicap™, pg. 103

RelyX™ Unicem, pg. 95-97RelyX™ Luting 2, pg. 101

Introductor Kit Ketac Cem radiopaque

Ketac™ Cem radiopaqueGlass Ionomer Luting Cement




orthodontic appliances made of metal • Cavity lining

Product Benefits• Low film thickness• Radiopaque• Fluoride release


Ketac Cem radiopaque 3:30 min.• Setting time (from begin of mix):

Ketac Cem radiopaque 7:00 min.


37200 Introductor Kit1 Powder 33 g, 1 Liquid 12 ml, 1 Mixing Pad

37230 Triple Pack3 Powder, 33 g each, 3 Liquid, 12 ml each, 1 Mixing Pad

Refills

37210 1 Powder 33 g


106


Durelon™


Carboxylate Luting Cement

Carboxylate luting cement Durelon and Durelon fast setting in handmix version or in the Maxicap™ System from 3M ESPE.


bridges made of – Metal except titanium frameworks – Porcelain-fused to metal • Cavity lining

Product Benefits• Proven to have extremely low risk of post-operative

sensitivity• Thin film thickness• Fluoride release• Our Maxicap™ System offers simple handling,


Instructions for UseHandmix version – cementation (1:2):• Powder normal setting, universal liquid:

2:30*/10:00** min.• Powder normal setting, thin-flowing liquid:

2:00*/7:00** min.• Powder fast setting, universal liquid:

1:00*/5:00** min.• Powder fast setting, thin-flowing liquid:

1:00*/3:30** min.Handmix version – linings (1:1):• Powder normal setting, universal liquid:

1:30*/6:00** min.• Powder fast setting, universal liquid:

0:45*/3:30** min.Maxicap version: • Mixing time:

RotoMix™: 0:08 min. CapMix™: 0:10 min.

• Working time (including mixing):Durelon Maxicap 2:30 min.

• Setting (from begin of mix): Durelon Maxicap 5:30 min.


38059 Introductor Kit Powder1 Powder 20 g, 4 Measuring Syringes (13.3 ml), 1 Mixing Pad

Triple Pack Powder

38236 3 Powder Normal Setting, 20 g each

38237 3 Powder Fast Setting, 20 g each

Triple Pack Liquid

38216 1 Dropper Bottle Universal Liquid 40 g

38224 1 Dropper Bottle Thin-Flowing Liquid 40 g

38265 12 Measuring Syringe Universal Liquid, 40 g each

Refills Durelon Ma icap

56310 20 Capsules



37180 1 Combi Pack Maxicap Activator/ Applier

Introductor Kit Durelon

*) Working time (from begin of mix)**) Setting time (from begin of mix)




RotoMix™, pg. 128CapMix™, pg. 128

107


RelyX™ Temp NETemporary Cement Zinc Oxide Non-Eugenol


56660 Refill1 Base Paste 30 g, 1 Catalyst 13 g, 1 Mixing Pad

Indications• Temporary cementation of temporary and permanent

crowns and bridges

Product Benefits• Very low film thickness• High adhesion to tooth in combination with easy

removal of the temporary restoration• Eugenol-free, therefore universally applicable,

independent on whether subsequent cementations are performed conventionally or adhesively

• Cement excess remains in temporary restoration for easy cleaning of tooth

• Reduction of end hardness possible by adding vaseline

Refill Rel X Temp NE


Protemp™ 4, pg. 84Protemp™ II, pg. 85

Rely™ ARC, pg. 100Ketac™ Cem Easymix, pg. 104


RelyX™ Temp ETemporary Cement Zinc Oxide Eugenol


35014 Refill1 Base Paste 25 g, 1 Activator 18 g, 1 Mixing Pad

Indications• Temporary cementation of temporary and permanent

crowns and bridges

Product Benefits• Easy removal of the excess cement from the tooth and

the restoration• Reduction of end hardness possible by adding vaseline

Refill Rel X Temp E

2009

Top Temporary Cement

108

Crowns and BridgesLi

ners

Gla

ss Io

nom

er R

esto

rativ

es

Etch

ing

and

Bon

ding

Com

posi

te R

esto

rativ

es

VPS

Prec

isio

n Im

pres

sion

M

ater

ials

Prel

imin

ar Im

pres

sion

s an

d B

ite R

egis

trat

ion

Pol

ethe

rPr

ecis

ion

Impr

essi

on

Mat

eria

ls

109

Crowns and Bridges

Lava™

Lava™ CeramLava™ Scan ST

Pages 110-114

Cementation

Permanent Luting CementsRelyX™ Unicem Aplicap™

RelyX™ Unicem Maxicap™





Durelon™



Pages 94-107


Tem

pori

atio

n

Infe

ctio

n C

ontr

ol

Loca

l Ane

sthe

tics

Cem

enta

tion

Cro

wns

and

Brid

ges

Dev

ices

, Acc

esso

ries

and

Spar

e Pa

rts

110

Full contourCAD/CAM RestorationSoon, dentists will be able to prescribe a Lava™ Zirconia DV Crown. Using this system, labs can design and produce an anatomically designed veneer with all the precision of the Lava™ CAD/CAM system. Plus, with glass ceramic blocks in enamel colors and fusion porcelains in dentin colors, the final full contour restoration is more esthetic than the single-layer made with pressable ceramics.

Lava Zirconia Restoration, porcelain work created with the Lava Digital Veneering S stem.

LavaChairside Oral Scanner C.O.S.3

Digital ImpressionA breakthrough in digital imaging

that offers precise-fitting restorations, greater patient comfort

and fewer time-consuming stepsfor both labs and dentists.

At 3M ESPE, we’ve already spent more than a decade developing digital solutions for dentists, labs and milling centers. We’ve spent even longer asking customers what makes sense and what doesn’t. We know how one decision relates to another, in your workflow.

Lava Zirconia Restoratiol i k d

Lava™

Precision Solutions

Lava Ceram

Lava™ – Precision Solutions for Patients, Dentists and Labs!


Chairside Oral

Soon, dentists will be able to prescribe a Lava™ Zirconia DV Crown. Usingthis system, labs can design andproduce an anatomically designedveneer with all the precision of the Lava™ CAD/CAM system Plu

Aesthetics

111

Pentami 3Automatic Mi ing Unit

Traditional ImpressionProven clinical experience and development of impression materials and devices during the last 40 years.

CAD DesignAllows labs to digitize traditional

models so they can confidently move from conventional wax

up design to virtual design. The system is an integral part of

the Lava™ CAD/CAM system for Lava™ Zirconia. It can also be

used to design wax/resin patterns and laser-sintered metal restorations for selective

third-party devices.

CAM ManufacturingProductivity is redefined in this machine,

which can run up to 76 hours straight. Offers both 3- and 5-axis milling.

Works with multiple materials including Lava Zirconia, wax and glass ceramic

blocks that are part of the Lava™ Digital Veneering System.

Sintering ProcessThe high-temperature, high-speed furnace for Lava Zirconia copings and frameworks has different sintering programs for Lava Zirconia. This gives labs the flexibility to sinter overnight or throughout the work day.

Lava Furnace 2003

Fle ibilit

Lava CNC 500 Milling Machine2

roductivitPro

Lava Scan ST Design S stem

* You will find further information in Lava™ study brochures.Some products are available in selected

markets only. Please ask your local 3M ESPE contact.

1 Scheduled for release in 2009.2 Scheduled for release in 2009 in selected markets. Please ask your local 3M ESPE contact.3Now available in selected.

Lava Zirconia Frame Multi XL1

Lava Wa Block 60 1

Lava Digital Veneering S stem1

112


Lava™ CeramOverlay Porcelain

Lava CeramThe system’s own overlay porcelain called Lava Ceram is exactly tailored to the CTE (coefficient of thermal expansion) of the zirconia framework. This enables a permanently tension-free material bond. The demand for high aesthetics of an all ceramic system is taken into account with a comprehensive range of components. The fluorecent components will result in a natural and brilliant colour. With the innovative effect and opalecent transpa porcelains, restorations can be obtained which are almost impossible to discern from natural teeth in the mouth. Even with a standard layering scheme, an exact and reliable colour shading can be realized. Individualization possibilities are given with the magic intensive shades and the transpa porcelains. For perfect shaping of interdental and occlusal regions, very thin layers can be added. The colours are adapted to the Vita* Classic colour system.


68719 Lava Ceram Popular Set1 Lava Ceram MO 15 g (Shades: A1, A2, A3, A3.5, B1, B2, B3, C2, D2, W2), 1 Lava Ceram D 15 g (Shades: A1, A2, A3, A3.5, B1, B2, B3, C2, D2, W2), 1 Lava Ceram 15 g (Shades: E1, E2, E3, E4, E5, E6, T1, T2, T3, T4, SH1, SH3, SH5, CR1, CR2, CL), Lava Ceram Glaze 15 g, Lava Ceram Stain & Glaze Liquid 40 ml, 1 Lava Ceram Modeling Liquid 40 ml, 1 Lava Ceram Shoulder Liquid 40 ml, Lava Ceram Combination Table, 4 Lava Ceram Shade Guides: Frame Work MO, Enamel/Transpa, Dentin, Shoulder Magic Intensive

68720 Lava Ceram Performer Set1 Lava Ceram 15 g (Shades: OD1, OD2, OD3, OD4, FL1, FL2, FL3, FL4, FL5, FL6, ICE1, ICE2, CI1, CI2, CI3, N1, N2, N3, N4, G1, G2)1 Lava Ceram Modeling Liquid 40 ml,1 Lava Ceram Performer Set Shade Guide

68721 Lava Ceram Pop Art Set1 Lava Ceram 5 g (Shades: I1, I2, I3, I4, I5, I6, I7, I8, I9, I10, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10)1 Lava Ceram Glaze 15 g, Lava Ceram Stain & Glaze Liquid 40 ml, 1 Lava Ceram Modeling Liquid 40 ml

Lava Ceram Popular Set


Standard packages15/50 g each Dentin Porcelain in a Glass with the Shades

68646 D A1, 15 g 68500 D A1, 50 g

68647 D A2, 15 g 68501 D A2, 50 g

68648 D A3, 15 g 68502 D A3, 50 g

68649 D A3.5, 15 g 68503 D A3.5, 50 g

68650 D A4, 15 g

68651 D B1, 15 g 68505 D B1, 50 g

68652 D B2, 15 g 68506 D B2, 50 g

68653 D B3, 15 g

68654 D B4, 15 g

68655 D C1, 15 g

68656 D C2, 15 g 68510 D C2, 50 g

68657 D C3, 15 g

68658 D C4, 15 g

15 g each Dentin Porcelain in a Glass with the Shades

68659 D D2, 15 g

68660 D D3, 15 g

68661 D D4, 15 g

15/50 g each Enamel Porcelain in a Glass with the Shades

68662 E1, 15 g 68520 E1, 50 g

68663 E2, 15 g 68521 E2, 50 g

68664 E3, 15 g 68522 E3, 50 g

68665 E4, 15 g 68523 E4, 50 g

15 g each Shoulder Ceramic in a Glass with the Shades

68669 SH 1, 15 g

68671 SH 3, 15 g

68673 SH 5, 15 g


Ketac™ Cem, pg. 103RelyX™ Unicem, pg. 95-97

113


*Registered trademark of Vita Zahnfabrik H. Rauter GmbH & Co. KG, Bad Säckingen/Germany.


Framework Modifier in a Glass with the Shades

68630 MO A1, 15 g 68638 MO B4, 15 g

68631 MO A2, 15 g 68639 MO C1, 15 g

68632 MO A3, 15 g 68640 MO C2, 15 g

68633 MO A3.5, 15 g 68641 MO C3, 15 g

68634 MO A4, 15 g 68642 MO C4, 15 g

68635 MO B1, 15 g 68643 MO D2, 15 g

68636 MO B2, 15 g 68644 MO D3, 15 g

68637 MO B3, 15 g 68645 MO D4, 15 g

Enamel Effect Porcelain in a Glass with the Shades

68666 E5 Polar, 15 g

68667 E6 Sun, 15 g

Transparent-opal Porcelain in a Glass with the Shades

68677 T1 Neutral, 15 g

68678 T2 Yellow, 15 g

68679 T3 Blue, 15 g

68680 T4 Grey, 15 g

Bleaching Shades

68681 D W1, 15 g

68682 D W2, 15 g

68683 D W3, 15 g

68684 MO W1, 15 g

68685 MO W2, 15 g

68686 MO W3, 15 g

High-Fluorescene Dentin Porcelains

68696 FL1 Cream, 15 g 68699 FL4 Mango, 15 g

68697 FL2 Gold, 15 g 68700 FL5 Nougat, 15 g

68698 FL3 Corn, 15 g 68701 FL6 Olive, 15 g

Opaque Dentin Porcelains

68702 OD1 Ivory, 15 g 68704 OD3 Amber, 15 g

68703 OD2 Curry, 15 g 68705 OD4 Siena, 15 g

High-Opalscene Transpa Porcelains

68706 N1 Pearl, 15 g 68708 N 3 Crystal, 15 g

68707 N2 Frost, 15 g 68709 N 4 Snow, 15 g

Transparent Opal Porcelains

68710 ICE1 Diamant, 15 g 68711 ICE 2 Flamingo, 15 g

Cervical Incisal Transpa Porcelains

68712 CI1 Lychee, 15 g 68714 CI3 Lemon, 15 g

68713 CI2 Apricot, 15 g

Gingiva Porcelains

68715 G1 Light, 15 g 68716 G2 Dark, 15 g

Correction Porcelains

68717 CR1 Neutral, 15 g 68718 CR2 Yellow, 15 g


Refills5 g each, Magic Intensive Shade in a Glass with the Shades

68535 I1 Ocean blue

68536 I2 Atlantis

68537 I3 Chestnut

68538 I4 Havanna

68539 I5 Orange

68540 I6 Khaki

68541 I7 Vanilla

68542 I8 Honey

68543 I9 Gingiva

68544 I10 Violet

Refills5 g each, Stain in a Glass with the Shades

68597 S1 Ocean blue

68598 S2 Atlantis

68599 S3 Chestnut

68600 S4 Havanna

68601 S5 Orange

68602 S6 Khaki

68603 S7 Vanilla

68604 S8 Honey

68605 S9 Gingiva

68606 S10 Violet

Refills

68676 1 Glaze 15 g

68555 1 Glaze 40 g, G

68546 1 Transparent-clear 50 g, CL

68668 1 Transparent-clear 15 g, CL

68585 1 Bottle Modelling Liquid 40 ml

68586 1 Bottle Modelling Liquid 300 ml

68584 1 Bottle Shoulder Ceramics liquid 40 ml

68589 1 Bottle Stain/Glaze Liquid 40 ml

68722 Shade Guide Frame Work Modifier

68723 Shade Guide Enamel/Transparent

68724 Shade Guide Shoulder/Magic Intensive

68725 Shade Guide Performer Set

68726 Shade Guide Dentin


Ketac™ Cem, pg. 103RelyX™ Unicem, pg. 95-97

114


Lava™ Scan STSatellite Scanner for Dental Labs

The Lava™ Scan ST Scanner is a robust scanner. It is the platform for the future of the Lava System. 3M ESPE provides the same scanner to both dental labs and Lava Milling Centers. The scanner for Lava Milling Centers includes an additional software package which enables the Lava™ Form Milling System to read the design files.

Product ProfileScan Window Allows digitalization up to 6 units and a total length of 42 mm. Total scan window 62 x 46 x 46 mm

Scan Time Average scan time is 1.40 min. for a single crown as well as for a 3-unit bridge

Scan T pe Non-contact, optical scanner with fringe projection triangulation for high accuracy

Scan Handling Ergonomic design and convenient handling with one hand height adjustment

Scanner Si e Width Depth High Weight Line Voltage Frequence Power

545 mm 465 mm 800 mm 45 kg 100–240 Volt 50–60 Hz 250 Watt

For order information please contact our local 3M ESPE

Representative

115


116

Local AnestheticsLi

ners

Gla

ss Io

nom

er R

esto

rativ

es

Etch

ing

and

Bon

ding

Com

posi

te R

esto

rativ

es

VPS

Prec

isio

n Im

pres

sion

M

ater

ials

Pol

ethe

rPr

ecis

ion

Impr

essi

on

Mat

eria

ls

Prel

imin

ar Im

pres

sion

s an

d B

ite R

egis

trat

ion

117

Local Anesthetics

Solution for InjectionUbistesin™ 1/200000Ubistesin™ 1/100000Mepivastesin™

Aspirations S ringePluraject™ 2

Summar of Product Characteristics

Pages 118-123

Tem

pori

atio

n

Infe

ctio

n C

ontr

ol

Loca

l Ane

sthe

tics

Cem

enta

tion

Cro

wns

and

Brid

ges

Dev

ices

, Acc

esso

ries

and

Spar

e Pa

rts

NEWNEW

118


Ubistesin™ 1/200000 (Ubistesin™)Solution for Injection

Local anesthesia (infiltration and nerve-block anesthesia) in dentistry.

Indications• For routine-type interventions during minor procedures

Ingredients• Articaine 4%• Epinephrine (Adrenaline) 1:200000

Product Benefits• Contains 4% articaine with epinephrine 1/200000 as a

vasoconstrictor• Contains only sulfite as a stabilizer (max 0.31 mg)• Cylindrical glass ampoules with inner coating of

silicone for smooth and gentle injection• Safety foil around the glass cylinders for protection

from splinters if ampoule breaks• Solid metal storage tin with padded interior for

protection against damage during transport

Instructions for Use• Suitable for adults and children over the age of 4 years• Average duration of action: 45 minutes pulpal

anesthesia and 120–240 minutes soft tissue anesthesia• Onset period of 1–3 minutes


15010 Refill1 Tin with 50 Cylinders (Redcap), 1.7 ml each

Local packaging available

Ubistesin 1/200000 Tin with 50 c linders


Pluraject™ 2, pg. 121

Summary of Product Characteristics on page 145–147

119


Ubistesin™ 1/100000 (Ubistesin™ forte)Solution for Injection


Indications• For complicated procedures requiring prolonged

anaesthesia

Ingredients• Articaine 4%• Epinephrine (Adrenaline) 1:100000

Product Benefits• Contains 4% articaine with epinephrine 1/100000 as a

vasoconstrictor• Contains only sulfite as a stabilizer (max 0.31 mg)• Cylindrical glass ampoules with inner coating of

silicone for smooth and gentle injection• Safety foil around the glass cylinders for protection

from splinters if ampoule breaks• Solid metal storage tin with padded interior for

protection against damage during transport

Instructions for Use• Suitable for adults and children over the age of 4 years• Average duration of action: 75 minutes pulpal



15110 Refill1 Tin with 50 Cylinders (Goldcap), 1.7 ml each


Ubistesin 1/100000 (forte) Tin with 50 c linders




120


Mepivastesin™

Solution for Injection


Indications• For simple extractions as well as cavity and stump

preparations• Especially suitable for patients to whom

vasoconstricting additives are contraindicated

Ingredients• Mepivacaine 3%

Product Benefits• Contains 3% mepivacaine• Contains no further additives and no epinephrine; thus is

particularly suited for patients to whom vasoconstrictive additives are contraindicated

• Cylindrical glass ampoules with inner coating of silicone for smooth and gentle injection

• Safety foil around the glass cylinders for protection from splinters if ampoule breaks

• Solid metal storage tin with padded interior for protection against damage during transport

Instructions for Use• Suitable for adults and children• Average duration of action: 20–40 minutes pulpal



13014 Refill1 Tin with 50 Cylinders (Bluecap), 1.7 ml each


Mepivastesin Tin with 50 c linders




121


Pluraject™ 2Aspiration Syringe

Features• Aspiration Syringe for 1.8 ml cylindrical glass

ampoules with perforated stoppers• For use with dental injection needles with metric and

inch thread• Manual aspiration (active)• Self-aspiration (passive)

Product Benefits• Lightweight and compact for better handling• Easy loading and unloading of ampoules thanks to flip

mechanism• Active and passive aspiration possible


76011 1 Syringe, complete, metric thread

76012 1 Syringe, complete, inch thread


Ubistesin™ 1/200000, pg. 118Ubistesin™ 1/100000 (forte), pg. 119

Mepivastesin™, pg. 120

NEWNEW

122


3M ESPE Local AnestheticsSummary of Product Characteristics

Ubistesin 1/10000040 mg/ml + 10 micrograms/mlsolution for injection

Ubistesin 1/20000040 mg/ml + 5 micrograms/mlsolution for injection

COMPOSITION

Ubistesin 1/1000001 ml solution for injection contains:Active substances:Articaine hydrochloride 40 mgEpinephrine (adrenaline) 10 microgramsas epinephrine (adrenaline) hydrochloride

Ubistesin 1/2000001 ml solution for injection contains:Active substances:Articaine hydrochloride 40 mgEpinephrine (adrenaline) 5 microgramsas epinephrine (adrenaline) hydrochloride

Excipients:Sodium sulphite (E 221) 0.6 mgSodium chloride, Water for injections, Hydrochloric acid 14%and Sodium hydroxide solution 9% for adjusting the pH-value

CLINICAL PARTICULARS

Therapeutic indicationsUbistesin 1/100000Local anesthesia (infiltration and nerve-block anaesthesia)in dentistry.Ubistesin 1/100000 is especially indicated for complicated procedures requiring prolonged anaesthesia.

Ubistesin 1/200000Local anesthesia (infiltration and nerve-block anaesthesia)in dentistry during minor procedures.

Contraindications

The use in children under 4 years of age is contraindicated.Ubistesin is contraindicated in case of hypersensitivity to the active substances, sodium sulphite (221) or to any of the other excipients.

Due to the local anesthetic ingredient articaine, Ubistesin is not allowed to be used in the event of– known allergy or hypersensitivity to local anesthetics of the

amide type– severe impairment of the impulse initiation and conduction

system of the heart (e.g. grade II and III AV block, pronounced bradycardia)

– acutely decompensated cardiac insufficiency– severe hypotension– patients who are known to have a deficiency in plasma

cholinesterase activity– haemorrhagic diatheses – particularly with nerve-block

anaesthesia– injection into an inflamed area

Due to the content of epinephrine as a vasoconstrictor admixture, Ubistesin is not allowed to be used in the event of– Heart diseases such as:– unstable angina pectoris– recent myocardial infarction– recent coronary artery bypass surgery– refractory arrhythmias and paroxysmal tachycardia or high-

frequency, continuous arrhythmia– untreated or uncontrolled severe hypertension– untreated or uncontrolled congestive heart failure– concomitant treatment with monoamine oxidase (MAO)

inhibitors or tricyclic antidepressants

Due to the content of sulphite as excipient, is not allowed to be used in the event of– allergy or hypersensitivity to sulphite– severe bronchial asthmaUbistesin can provoke acute allergic reactions with anaphylactic symptoms (e.g. bronchospasm).

Special warnings and precautions for use

Ubistesin must be used with particular caution in the event of– severe impairment to the renal function– angina pectoris – arteriosclerosis– considerably impaired blood coagulation – thyrotoxicosis

– narrow-angle glaucoma– diabetes mellitus– lung diseases – particularly allergic asthma– pheochromocytoma

Accidental injection may be associated with convulsions, followed by central nervous system or cardiorespiratory arrest. Resuscitative equipment, oxygen, and other resuscitative drugs should be available for immediate use.

Since amide-type local anesthetics are also metabolised by the liver, Ubistesin should be used with caution in patients with hepatic diseases. Patients with severe hepatic diseases are at greater risk of developing toxic plasma concentration.

The product should be administered with caution in patients with impaired cardiovascular function since they may be less able to compensate for functional changes associated with the prolongation of A-V conduction produced by these drugs.

The product should be administered with caution to patients with history of epilepsy.

There is a possibility of positive results on doping tests performed on sportsmen.

It should be taken into consideration that during treatment with blood coagulation inhibitors (e.g. heparin or acetylsalicylic acid), an inadvertent vasopuncture when administering the local anaesthetic can lead to serious bleeding, and that in general the hemorrhagic tendency is increased.

Inadvertant intravascular application must be avoided

The lower blood flow in the pulp tissue due to the content of epinephrine and thus the risk to overlook an opened pulp has to be taken into account regarding cavity or crown preparations.

This medicinal product contains less than 1 mmol sodium (23 mg) per 1 ml, i.e. essentially “sodium-free”.

The product must be used with particular caution in patients taking phenothiazines or non-selective beta-blockers.

Precautions for use:

Each time a local anaesthetic is used the following drugs/therapy should be available:

– Anti-convulsant medicines (benzodiazepines or barbiturates), myorelaxants, atropine and vasopressors or adrenaline for a severe allergic or anaphylactic reaction.

– Resuscitating equipment (in particular a source of oxygen) enabling artificial ventilation if necessary.

– Careful and constant monitoring of cardiovascular and respiratory (adequacy of ventilation) vital signs and the patient’s state of consciousness should be monitored after each local anaesthetic injection. Restlessness, anxiety, tinnitus, dizziness, blurred vision, tremors, depression, or drowsiness may be early warning signs of central nervous system toxicity.

Pregnancy and lactation

For Ubistesin non clinical data on exposed pregnancies are available. In regard of articaine animal studies do not indicate direct or indirect harmful effects with respect to pregnancy, embryonal/foetal development, parturition or postnatal development. Animal studies carried out with epinephrine have shown reproductive toxicity. The potential risk for humans is unknown. Caution should be exercised when prescribing to pregnant women.

It is unknown whether articaine and epinephrine is excreted in human breast milk. The excretion of articaine and epinephrine in milk has not been studied in animals. A decision on whether to continue/discontinue breast-feeding or to continue/discontinue therapy with Ubistesin should be made taking in to account the benefit of breast-feeding to the child and the benefit of Ubistesin therapy to the women. Therefore, nursing mothers should milk and discard the first mother’s milk following anaesthesia with articaine.

Effects on the ability to drive and use machines

Although test patients have shown no impairment of their normal reactions when driving a vehicle, the dentist has to assess in each case the possible impairment of safety when operating a motor vehicle or machinery. The patient should not leave the dental office earlier than at least 30 minutes after the injection.

Undesirable effects

Due to the local anesthetic ingredient articaine, the following adverse effects can occur

Cardiovascular disordersRare ( 1/10,000 to < 1/1,000)Decrease in heart rate, hypotension.Drop in blood pressure, cardiac impulse conduction disorders, bradycardia, asystolia, cardiovascular arrest.

Nervous system disordersRare ( 1/10,000 to < 1/1,000)Metallic taste, tinnitus, dizziness, nausea, vomiting, restlessness, anxiety, yawning, shaking, nervousness, nystagmus, logorrhoea, headache, increase in respiratory rate. Paresthesias (loss of sensation, burning, tingling) of the lip, tongue, or both.When these signs appeared rapid corrective measures to prevent possible worsening are required:Drowsiness, confusion, tremor, muscle twitching, tonic-clonic seizures, coma and respiratory paralysis.

Respiratory disordersRare ( 1/10,000 to < 1/1,000)Tachypnea, then bradypnea, which could lead to apnoea.

Allergic reactionsVery rare (< 1/10,000)One may observe manifestation of hypersensitivity to articaine as rash, pruritus edema, pruritus, and erythema as well as nausea, diarrhea, wheezing or anaphylaxis. Cross-reactivity to articaine has been reported in a patient with delayed hypersensitivity to prilocaine.In general, patients with demonstrated hypersensitivity to articaine or other amides should receive an ester-group local anaesthetic for subsequent procedures.The administration of large doses of articaine may produce methaemoglobinemia in patients with subclinical methaemoglobinemia.

Due to the content of epinephrine as a vasoconstrictor admixture, the following undesirable effects can occur

Cardiovascular disordersRare ( 1/10,000 to < 1/1,000)Heat sensation, sweating, heart racing, migrainelike headache, blood pressure increase, angina pectoris disorders, tachycardias, tachyarrhythmias and cardiovascular arrest as well as acute oedematous thyroid swelling.

Due to the content of sulphite as excipient, the following undesirable effects can occur in very rare cases:Allergic reactions or hypersensitivity reactions, particularly in bronchial asthmatics, which are manifested as vomiting, diarrhoea, wheezing, acute asthma attack, clouding of consciousness or shock.

Due to the content of both articaine and epinephrine, the following undesirable effects can occur

Nervous system disorders2 weeks delayed onset of facial nerve paralysis has been described with articaine/epinephrine, the event still occur 6 months later.

PRESCRIPTION

Information shortened. For further details please refer to the instructions for Use.

Date of revision of the text: May 2007

3M ESPE AGESPE PlatzD-82229 Seefeld, Germany

123

3M ESPE Local AnestheticsSummary of Product Characteristics

MEPIVASTESIN™

Active substance: Mepivacaine hydrochloride

COMPOSITION

1 ml solution for injection contains:Active substanceMepivcaine hydrochloride 30 mg

ExcipientsSodium chloride, Water for injections

CLINICAL PARTICULARS

Therapeutic indications

Infiltration anaesthesia and nerve-block in dentistry.MEPIVASTESIN is indicated for simple extractions as well as cavity and stump preparations. MEPIVASTESIN is especially suitable for patients to whom vasoconstricting additives are contraindicated.

Contraindications

Due to the local anesthetic ingredient mepivacaine, MEPIVASTESIN is not allowed to be used in the event of– known allergy or hypersensitivity to local anesthetics of the

amide type– severe impairment of the nervous impulses and conduction

system of the heart (e.g. grade II and III AV block, pronounced bradycardia)

– acutely decompensated cardiac insufficiency – severe hypotension

Special warnings and special precautions for use

MEPIVASTESIN must be used with particular caution in the event of– severe impairment to the renal or hepatic function– angina pectoris – arteriosclerosis – injection into an inflamed area– considerable impaired blood coagulation

Please note that with patients taking anticoagulants (e.g. heparin or acetyl salicylic acid), an inadvertent vascular puncture during injection may lead to severe hemorrhage, and the hemorrhage disposition is generally increased.

Erroneous intravascular application must be avoided.

Pregnancy and lactation

PregnancyThere are no clinical studies regarding the application of mepivacaine hydrochloride during pregnancy. Animal studies have not provided adequate insights in view of possible effects of mepivacaine hydrochloride on pregnancy, embryofetal development, childbirth and postnatal development. Mepivacaine hydrochloride passes the placental barrier and reaches the unborn child.As compared to other local anesthetics, when using mepivacaine during the first trimester of the pregnancy an increased risk of malformations cannot be excluded, during early pregnancy mepivacaine should only be used, if no other local anesthetics are available.

LactationIt is unknown in which doses mepivacaine hydrochloride reaches the breast milk. If its application is necessary during lactation, breastfeeding may be resumed after about 24 hours.

Effects on the ability to drive and use machinery

In sensitive patients, the injection of MEPIVASTESIN may be followed by a temporary impairment of reactions, e.g. in traffic. The physician must decide from case to case whether the patient should be allowed to operate a motor vehicle or machinery.


Undesirable effects

Due to the local anesthetic ingredient mepivacaine, the following side effects can occur from the use of MEPIVASTESIN:Milder central nervous symptoms involve metallic taste, tinnitus, dizziness, nausea, vomiting, restlessness, anxiety, initial increase in respiratory rate.More severe symptoms are drowsiness, confusion, tremor, muscle twitching, tonoclonic spasms, coma and respiratory paralysis.Severe cardiovascular episodes are seen in the form of a drop in blood pressure, asequence, bradycardia, cardiovascular arrest.

Allergic reactions to mepivacaine are extremely rare.

Prescription

Information shortened. For further details please refer to the instructions for Use.

Date of revision of the text: May 2005

3M ESPE AGESPE PlatzD-82229 Seefeld, Germany

124


Line

rs

Gla

ss Io

nom

er R

esto

rativ

es

Etch

ing

and

Bon

ding

Com

posi

te R

esto

rativ

es

VPS

Prec

isio

n Im

pres

sion

M

ater

ials

Pol

ethe

rPr

ecis

ion

Impr

essi

on

Mat

eria

ls

Prel

imin

ar Im

pres

sion

s an

d B

ite R

egis

trat

ion

125


Automatic Mi ing Unit for Impression MaterialsPentamix™ 3

Mi ing Units for CapsulesRotoMix™

CapMix™

Pol meri ation UnitElipar™ S10

Pages 126-129

Dev

ices

, Acc

esso

ries

and

Spar

e Pa

rts

Tem

pori

atio

n

Infe

ctio

n C

ontr

ol

Loca

l Ane

sthe

tics

Cem

enta

tion

Cro

wns

and

Brid

ges

NEWNEW

NEWNEW

126



Filtek™ Family, pg. 36-42Vitremer™, pg. 22Ketac™ Family

Adper™ Family, pg. 30-35Vitrebond™, pg. 15

Elipar™ S10LED Curing Light

For polymerization of light-curing dental materials.Like no other …inside and out.

Product Benefits• One-piece stainless steel casing

– virtually unbreakable and sealed against contamination

• Smooth, vent-free, stainless steel exterior for fast and easy disinfection and also resistant to discoloration

• Unique ergonomic V-shape for a comfortable grip from any angle

• 1200 mW/cm2 intensity powered by latest LED technology for up to 50% more optical power1

• Large 10 mm light guide illuminates up to 80% more curing surface for time-saving, one-shot curing1

• Optimized optics provides a more focused light output for up to 3 times more intensity at the clinically relevant distance of 7 mm, for a significantly improved depth of cure1

• Fast curing of compatible materials in half the manufacturers recommended cure time 5-second cure on tested composites, shade A3 and lighter2

• Simple, intuitive, two-button operation with one cure mode for all indications

• Unique, multiple-setting light timer offering preset cure times of 5, 10, 15, 20 and 120 seconds, plus a unique tack-cure mode for an easier and more predictable removal of excess cement

• Unique magnetic light guide mount for quick and easy attachment, removal and positioning of the light

Technical DataWavelength range: 430–480 nmLight Intensity: 1200 mW/cm² ±10% (independent of battery power level)Power Supply: Lithium-ion batteryHandpiece:Dimensions: (Ø x L) 28 x 270 mm, (1.10 x 10.63 in)Weight: 250 g (0.55 lb) (incl. light guide)Charger:Dimensions: (L x W x H) 170 x 95 x 50 mm, (6.69 x 3.74 x 1.96 in)Weight: 650 g (1.43 lb)

NEWNEW

Magnetic mount


76951 1 Elipar S10 LED Curing Light

Accessories

76958 1 Elipar S10 Light Guide, 10 mm

76957 1 Elipar S10 Eye Shield

76956 1 Elipar S10 Rechargeable Battery


1 Compared to leading devices tested. 2 List of tested materials is available. Only if light guide can be placed in close proximity to

increment, at 100% intensity output.

Elipar S10 LED Curing Light

127



For automatic mixing and dispensing of a wide range of Penta™ impression materials from 3M ESPE.

Product RangePolyether Impression MaterialsImpregum™ Penta™ SoftImpregum™ Penta™ Soft QuickImpregum™ Penta™ H DuoSoft™

Impregum™ Penta™ H DuoSoft™ QuickImpregum™ Penta™ L DuoSoft™


VPS Impression Materials Express™ XT Penta™ PuttyExpress™ XT Penta™ HExpress™ XT Penta™ H Quick

VPS Alginate Replacement Position™ Penta™

Position™ Penta™ QuickPolyether Bite Registration Material Ramitec™ Penta™

Technical DataRate of dispensing: > 150 ml/minMixer Shaft Speed: 380–760 rpmExtrusion Force: up to 6500 NDimension: (L x W x H) 283 x 225 x 280Weight: 9800 g

Product Benefits

Pentami 3 Automatic Mi ing Unit, wall-mounted



Pentamix™ Impression Materials

• Fastest automatic mixer worldwide – Mixes and dispenses Penta™ materials faster than any other automatic mixing unit (twice as fast as Pentamix™ 2).

• Faster work procedure – Enables quick-setting materials and reduces stress for assistants.

• Smallest automatic mixing unit in the market –Compact design saves valuable counter/wall space.

• Enhanced handling – Handles more convenient and ergonomic with one-button operation from both sides of the unit, easier cartridge exchange and easy-to-attach mixing tips.

• Contemporary and robust design


Pentami 3 Automatic Mi ing Units

77871 1 Pentamix 3 – 230 V Western Europe

77873 1 Pentamix 3 – 230 V GB



NEWNEW 2009

Assistant’s Choice

128


RotoMix™

Rotating Capsule Mixing Device

Product Benefits• Completely homogenous mix with the rotation mixing

principle• Rotating platform with simultaneously counterrotating

capsule holder produces the most complete mix• Automatic centrifugal cycle produces a denser mix and

virtually void-free material• Mixing time reduced by 30% on average (compared

with CapMix™)

• Easy loading/unloading of capsules• Extremely quiet operation• Touchpad features both pre-set (8 and 10 sec.) and

programmable setting (1–39 sec.) for easy operation• Centrifugal movement can be switched off if required,

for example to mix amalgam• Five star awarded product (Reality’s Choices)

Technical DataMixing speed: 2850 rotations per minuteCentrifugation speed: 2950 rotations per minuteDimension: (W x H x D) 180 x 210 x 250 mmWeight: 4000 g


RotoMi Capsule Mi ing Units

76300 1 RotoMix – 230 V/50 Hz EU

76301 1 RotoMix – 230 V/50 Hz GB

76303 1 RotoMix – 230 V/50 Hz CH

76305 1 RotoMix – 230 V/50 Hz SA

CapMix™

Capsule Mixing Device

Product Benefits• Practical capsule holder, with automatic snap shut

retention, for effortless working• Touchpad features both pre-set (10 and 15 sec.) and

programmable setting (1–39 sec.) for easy operation• Extremely quiet operation• With a user-friendly and easy-to-clean touchpad

Technical DataMixing speed: 4300 oscillations per minuteDimension: (W x H x D) 195 x 160 x 195 mmWeight: 3750 g


CapMi Capsule Mi ing Units

76190 1 CapMix – 230 V/50 Hz EU

76191 1 CapMix – 230 V/50 Hz CH

76195 1 CapMix – 230 V/60 Hz SA

76193 1 CapMix – 230 V/50 Hz GB


For all types of 3M ESPEMixing Capsules

RotoMi Capsule Mi ing Unit

CapMi Capsule Mi ing Unit


129


Elipar FreeLight 2 AccessoriesItem No. Product Information

Accessories fits for Elipar FreeLight 2

76946 1 Elipar FreeLight 2 Large Eyeshield, Ø 70 x 40 mm

76941 1 Elipar FreeLight 2 Turbo light guide, Ø 8 mm

76942 1 Elipar FreeLight 2 Proxi light guide, Ø 3 mm

76943 1 Elipar FreeLight 2 Maxi light guide, Ø 13 mm

76940 1 Elipar FreeLight 2 NiHM Battery

76945 1 Elipar FreeLight 2 Table holder

EliparTM S10 AccessoriesItem No. Product Information

Accessories

76958 1 Elipar S10 Light Guide, 10 mm

76957 1 Elipar S10 Eye Shield

76956 1 Elipar S10 Rechargeable Battery

Accessories and Spare Parts

Penta Mi ing TipsItem No. Product Information

71512 50 Penta Mixing Tips Red

Penta S stem AccessoriesItem No. Product Information

71210 1 Penta Elastomer Syringe, complete

71200 10 Spare Barrels for Penta Elastomer Syringe

71225 12 Application Tips for Penta Elastomer Syringe

71720 1 Knurled Nut for Penta Elastomer Syringe

Pentami AccessoriesItem No. Product Information

77780 1 Pair Penta Plunger Discs

77600 1 Pentamix Wall Mounting

950916 1 Pentamix Mounting Kit Twist Grip

950905 1 Pentamix Case Lid

CapMi AccessorItem No. Product Information

78-9902-4128-9

1 Capsule Holder Complete Set

RotoMi AccessorItem No. Product Information

78-9902-4174-3

1 RotoMix Motor Axle Cap

Elipar AccessoriesItem No. Product Information

Accessories Elipar TriLight, Elipar Classic,Elipar HighLight

76910 1 Elipar TriLight Mini-spot lamp

76710 1 Elipar Classic Mini-spot lamp(also compatible with Elipar HighLight)

Light Guides (are compatible with Elipar TriLight, Elipar Classic andElipar HighLight)

76640 1 Standard light guide, Ø 10 mm

76670 1 Maxi light guide, Ø 13 mm

78-8060-9549-9

1 Wall mounting (compatible with Elipar 2500, XL 3000)

Elipar FreeLight AccessoriesItem No. Product Information

Accessories fits for Elipar FreeLight

76946 1 Elipar FreeLight Large Eyeshield, Ø 70 x 40 mm

76941 1 Elipar FreeLight Turbo light guide, Ø 8 mm

76942 1 Elipar FreeLight Proxi light guide, Ø 3 mm

76943 1 Elipar FreeLight Maxi light guide, Ø 13 mm

76940 1 Elipar FreeLight NiHM Battery

76945 1 Elipar FreeLight Table holder

130

Infection ControlLi

ners

Gla

ss Io

nom

er R

esto

rativ

es

Etch

ing

and

Bon

ding

Com

posi

te R

esto

rativ

es

VPS

Prec

isio

n Im

pres

sion

M

ater

ials

Pol

ethe

rPr

ecis

ion

Impr

essi

on

Mat

eria

ls

Prel

imin

ar Im

pres

sion

s an

d B

ite R

egis

trat

ion

131

Infection Control

Avagard™ D

3M™ Comply™ Indicator Tape

3M™ Face Masks

Pages 132-134

Tem

pori

atio

n

Infe

ctio

n C

ontr

ol

Loca

l Ane

sthe

tics

Cem

enta

tion

Cro

wns

and

Brid

ges

Dev

ices

, Acc

esso

ries

and

Spar

e Pa

rts

132




Avagard™ DInstant Hand Antiseptic Wityh Moisturizers

Summar of features • Sensitive to hands

• Results in better skin condition versus the use of a traditional antiseptic handwash as assessed by an expert grader in a hospital study5

• Contains a high quantity of quality emollients (moisturizers) that are in a patented formulation specifically designed to be mild on skin3

• Nine out of ten healthcare professionals preferred Avagard D to their routine hand hygiene regimen (self-assessment data from 118 healthcare professionals)6

• Paraben, fragrance, dye free, and latex free7

• Compatible with latex and non-latex gloves8

• Contains 61% 2/2 ethyl alcohol in a mosturizing base.

Proven efficenc• Greater than 99% kill in MRSA and VRE in 15 seconds

(in vitro)1

• Effective against eight viruses associated with the common cold and flu (in vitro)2

- Hepatitis A - Avian Influenza type A- Adenovirus - Respiratory Scyncitial Virus (RSV)- Rhinovirus Type 37 - Human Coronavirus (HCV)- Feline Calicivirus - Rotavirus (a surrogate virus for Norovirus)

• Provides a 99.8% reduction of bacteria on contaminated hands in a single application healthcare personnel hand wash study (in vitro)9

• CHG compatible

• Meets the CDC6 Guideline for Hand Hygiene in healthcare settings.

Ordering Information


2317 Avagard™ D (Ethyl Alcohol, 61 % w/w) Instant Hand Antiseptic - CHG CompatiblePump Bottle (500ml)

133




3M™ Comply™

Indicator Tape

For a reliable identification of the sterilisation process.

Product Benefits• For steam sterilization• Excellent adhesion

Instructions for Use• Comply/steam sterilisation: Colour changes from pale

beige to dark brown (at 120 °C after 20 min., at 134 °C after 7 min.)

Technical DataSize of the indicator tape: 19 mm wide, 55 m longThickness of the crepe paper: 0.11 mm


1222-B 1 Roll Comply Indicator Tape for Steam Sterilisation

3M Compl Indicator Tapes

134


3M™ Face Masks

3M is a leading manufacturer of dental face masks and offers a complete line of fluid resistant face masks.The masks protect the wearer from contamination by microorganisms. Different types of masks are available to suit different wishes and requirements.

Elastic Band OP Mask (No. 2000 F)

Asepte Plus (No. 1942 FB) Asepte High Performance (No. 2042 F)

Elastic Band OP Mask (No. 2000 F)• Fluid resistant• Contains no fibreglass

– no skin irritation• Comfortable for the wearer

Aseptex Plus(No. 1942 FB)• Fluid resistant moulded mask• The outstanding moulded

shape makes it one of the most comfortable masks on the market

• Contains no fibreglass – no skin irritation

• 2 layers• 99% filtration efficiency• Glasses do not fog up

Aseptex High Performance (No. 2042 F)• Extremely high fluid resistance

due to the three filter system: The outer layer resists fluids, the second micofabric layer filters microorganisms, the soft inner layer absorbs respiratory moisture.

• Available in two sizes: normal and small

• Contains no fibreglass• Preformed moulded mask,

outstanding shape to suit all face contours

135

136

A

Accessories for Adhesives 35Accessories for Compomers 35Accessories for Composites 35Accessories and Spare Parts for Devices 129Accessories for Glass Ionomers 24Adhesive Repair System 30-31Adhesive Resin Cement 95-97Adper™ Easy One 30Adper™ Prompt™ L-Pop™ 32Adper™ Single Bond 2 33Adper™ Scotchbond™ Multi-Purpose 34Adper™ Scotchbond™ Multi-Purpose Plus 34Adper™ SE Plus 31Alginate Impression Material 78All-Ceramic System 110-114Aplicap™ Activator 24Aplicap™ Applier 24Automatic Mixing Unitfor Impression Materials 56-57, 127, 129

BBite Registration 79-80

CCapMix™, Accessories / Spare Parts 128, 129Capsules Mixing Devices Accessories /Spare Parts 128, 129Carboxylate Luting Cement 106Cavit™ / Cavit™-G / Cavit™-W 47Ceramic Primer 100Clinpro™ Sealant 45Composite for Temporary Crowns and Bridges 84-85Concise™ Composite 44Concise™ White Sealant System 46Crown Contouring Plier 90Crown Crimping Plier 90Crown Instruments 90Crown Scissors 90Crowns and Bridges 110-114

DDevices, Accessories and Spare Parts 126–129Durelon™ / -Maxicap™ 106

EElastomer Syringe, Accessories 73Elipar™ S10, Accessories / Spare Parts 126Etching and Bonding 29-35Express™ 72Express™ Accessories 73Express™ XT Light Body / Quick 70Express™ XT Penta™ H 69Express™ XT Penta™ Quick 69

Express™ XT Penta™ Putty 68Express™ XT Putty Soft 71Express™ XT Putty Quick 71Express™ XT Regula Body Quick 70

F

Face Masks 134Filtek™ P60 42Filtek™ P90 40-41Filtek™ Z 350 Flowable 37Filtek™ Z 350 Universal 36Filtek™ Z250 38Finishing and Polyshing System 48–49Fissure Sealant 45F2000 43

GGarant™ Accessories 73Garant™ Dispenser 1:1/2:1 73Garant™ Dispenser 10:1 84Garant™ Intraoral Tips 73Garant™ Mixing Tips 73Garant™ Plunger 1:1/2:1 73Garant™ Plunger 10:1 73Glass Fiber Post 98Glass Ionomer Accessories 27

IImpregum™ Soft 62Impregum™ Garant™ L DuoSoft 60Impregum™ Penta™ 58Impregum™ Penta™ H DuoSoft™ 61Impregum™ Penta™ H DuoSoft™ Quick 61Impregum™ Penta™ L DuoSoft™ 60Impregum™ Penta™ L DuoSoft™ Quick 60Impregum™ Penta™ Soft 59Impregum™ Penta™ Soft Quick 59Imprint™ Bite 80Infection Control 132-134Iso-Form Crowns 87

KKetac™ Bond / -Aplicap™ 14Ketac™ Cem Aplicap™ / Maxicap™ 103Ketac™ Cem Easymix 104Ketac™ Cem radiopaque 105Ketac™ Conditioner 24Ketac™ Fil Plus / -Aplicap™ 19Ketac™ Glaze 24Ketac™ Molar Aplicap™ 16Ketac™ Molar Easymix 18Ketac™ Molar Quick Aplicap™ 17Ketac™ N100 20Ketac™ Silver / -Aplicap™ / -Maxicap™ 23

137

LLava™ Crowns and Bridges 110-114Lava™ Ceram 112-113Lava™ Scan ST 114LED Curing Light, Accessories / Spare Parts 126, 129Light Cure Sealant 45Light-Curing Composite Materials 36-42Light-Curing Glass Ionomers 16-21Light-Curing Nano-Ionomer-Restorative 36Liners 14-15Local Anesthetics 118-120

MMaxicap™ Activator 24Maxicap™ Applier 24Mepivastesin™ 120Mixing Units for Capsules 128Mixing Unit for Impression Materials 56-57, 127, 129

PPalgat™ Plus / -Quick 78Penta™ Elastomer Syringe, Accessories 73Pentamix™ 3 Automatic Mixing UnitAccessories / Spare Parts 56-57, 127, 129Permanent Luting Cements 95-106Phosphoric Acid 29Photac™ Fil Quick Aplicap™ 21Pluraject™ 2 121Polishing System 48-49Polycarbonate Crowns 88Polyether Adhesives 58-62Polyether Bite Registration Material 79Polyether Precision Impression Materials 58-62Position™ Penta™ / -Quick 76Position™ Trays 77Preliminary Impressions 76-78Protemp™ II 85Protemp™ 4 84Protemp™ Crown 86

RRamitec™ 79Ramitec™ Penta™ 79RelyX™ ARC 100RelyX™ Ceramic Primer 100RelyX™ Fiber Post 98RelyX™ Luting 102RelyX™ Luting 2 101RelyX™ Temp E 107RelyX™ Temp NE 107RelyX™ Unicem™ Aplicap™ 95RelyX™ U100 97RelyX™ Unicem™ Maxicap™ 96RelyX™ Veneer 99RotoMix™, Accessories / Spare Parts 128, 129

SSatellite Scanner for Dental Labs 114Scotchbond™ Dual Cure 35Scotchbond™ Etchant 29Self-Etch Adhesive 30-33Silane Coupling Agent 100Silorane System Adhesive 41Single-Use Tray 77Sof-Lex™ Finishing and Polishing System 48-49Spare Parts for Devices 129Stainless Steel Crowns 89

TTemporary Crowns and Bridges 110-114Temporary Filling Material 47Temporary Luting Cements 107Temporization 84-90

UUbistesin™ 1/100000 (Ubistesin forte) 119Ubistesin™ 1/200000 118

VVitrebond™ 15Vitremer™ 22Valux™ Plus 39

138

138

3M Gulf Ltd.Dubai Health Care CityBldg. No. 26P.O. Box: 20191 - DubaiTel. : +971 4 3670 666Fax : +971 4 4380 556E-mail: [email protected]: http://www.3mespe.com/ae

3M, ESPE, Adper, Avagard, Prompt, L-Pop, Scotchbond, Alkaliner, Aplicap, CapMix, Cavit, Clinpro, Cojet, Concise, uoSoft, urelon, Elipar, Express,Filtek, Garant, Impregum, Impresept, Imprint, Ketac, Lava, Maxicap, Mepivastesin, MiniTip, MultiTray, Nimetic, Palgat, Paradigm, Penta, Pentamix,Permadyne, Photac, Pluraject, Position, Protemp, Ramitec, RelyX, Reprogum, Rocatec, RotoMix, Sof-Lex, Ubistesin, Vitrebond, Vitremer, Valux are trade-marks of 3M or 3M ESPE AG.

Documents

Proven solutions you cantrustmultimedia.3m.com/mws/media/601849O/3m-espe-product... · 2012-02-06 · independent, objective information on the most recent innovations and trends