Prueftechnik Brochure

8/12/2019 Prueftechnik Brochure

http://slidepdf.com/reader/full/prueftechnik-brochure 1/12

The PRÜFTECHNIK Group



Contents1. Preamble............................................................................ 32. Corporate identity .............................................................. 53. Tradition and the future ..................................................... 7

OPTALIGN® PLUSExact alignment of two coupled ma-

chine shafts is essential for smooth

running. The laser optical alignment

system OPTALIGN® PLUS enables an

alignment precision of a hundredth

of a millimeter to be achieved.



1. Preamble

Dieter BuschCompany founder

Expertise and responsibility

PRÜFTECHNIK AG is an international company active in themeasuring and control systems industry.

We offer our customers a wide variety of products andservices in the areas of nondestructive materials testing anddiagnostic maintenance.

PRÜFTECHNIK AG has a market-oriented strategy and aimsfor technological leadership in its core activities.

It is our objective to sustainably increase our corporatevalue and to generate a high value added for the benefit ofour shareholders, employees and the community as awhole in every country in which we operate.

We believe that our technical and commercial expertiseinvolves responsibility to work for the benefit of people inindustry and to contribute to development that is bothsustainable and environmentally sound.

PRÜFTECHNIK AG:Success through Expertise and Responsibility



PARALIGN®

The parallelity of rollers or cylinders is

very difficult to measure using conven-

tional optical methods. PARALIGN® is

an inertial measuring system that, for

the first time, can achieve accuracies of

up to 4 µm/m or 0.00027° with its three

orthogonal laser gyroscopes.



Company headquartersPRÜFTECHNIK Dieter Busch AGOskar-Messter-Straße 19-21D-85737 IsmaningGermany

2. Corporate IdentityLegal structurePublicly-held company (Aktiengesellschaft)

FoundedNovember 15, 1972

Commercial registerFebruary 12, 1973, as limited partnershipJune 15, 1992, as limited-liability companyOctober 29, 1992, as public company

Company objectiveThe objective of PRÜFTECHNIK AG is the development, production,sale and service of electronic measuring and testing systems.

Organizational structureThe PRÜFTECHNIK Group has the organizational form of a manage-ment holding company. It consists of the holding managementlevel, the central departments within the holding and the various

business units. The holding management has final responsibility forfinancial and, above all, strategic leadership to ensure the continueddevelopment of the group as a whole and of the individual businessunits. It exercises uniform leadership responsibilities in all associatedcompanies and therefore generally maintains a majority holding inthese. Its primary objective is securing long-term growth andearning power for the group as a whole. The holding forms astrategic umbrella over all business units with a focus on company-wide synergy management and leadership development.The next level of the holding hierarchy is structured according toproduct area and region. The various product lines and salesorganizations are largely independent from a legal standpoint and,

as such, enjoy relative autonomy with a high degree of entrepreneu-rial responsibility.

Product linesPRÜFTECHNIK Alignment Systems GmbHPRÜFTECHNIK Condition Monitoring GmbHPRÜFTECHNIK NDT GmbHWe offer our customers a wide range of products and services thatincludes systems for nondestructive testing, inductive heaters, shaftalignment systems, coordinate measuring equipment, bearingmonitoring systems, vibration analysis and balancing.

Patents

To protect our innovative developments, we have applied for orbeen granted approximately 200 patents and 100 registeredtrademarks worldwide.



The first OPTALIGN®

“Digital, multiprocess

laser ...” – those were

1983 that caused the

ogy-enthusiastic servi

beat faster. We wer

Close customer tiesMaintaining close customer ties is one of our primarygoals. Therefore we have built up a tight sales and servicenetwork that allows us to provide the best possiblesupport and services to our customers in the semi-finishedproducts industry and in the maintenance sector forrotating systems. We work closely with distributors in over60 countries around the world.

In addition, we have founded sales and service companiesin a number of countries:

PRUFTECHNIK LTD. Great BritainPRUFTECHNIK N.V. Belgium, NetherlandsPRUFTECHNIK S.A.R.L. FrancePRUFTECHNIK S.E.A. SingaporePRUFTECHNIK Service, Inc USAPRUFTECHNIK S.L. SpainPRUFTECHNIK S.R.L. ItalyPRUFTECHNIK Technology PolandPRUFTECHNIK WIBREM Ltd. PolandPRÜFTECHNIK Shanghai Representative Office, China

To us, being close to the market is more than just a slogan. It’s a commitment.

That’s why our sales organizations in countries across theglobe regularly offer customer training programs, in manycases in well-equipped training centers. It’s also whyPRÜFTECHNIK provides highly specialized and qualifiedservices throughout the world - especially in the areas ofturbine alignment, planning, installation, commissioningand operation of condition monitoring systems, and in themeasurement and alignment of rollers.In Germany alone we operate four technical offices inwhich highly-qualified sales engineers make every effort to

provide customers with solutions tailored to meet theirspecial requirements. A capable service departmentcomplements these efforts by offering expert customersupport in the area of machine diagnostics.To carry out these complex tasks responsibly, it is essentialthat sales departments, machine services and productservices be organized at the local level, that they be finelystructured, and that employees, having been thoroughlytrained, are well qualified to master whatever situationmay arise on the job.



3. Tradition and the future

Dieter Busch founded PRÜFTECHNIK Dieter Busch + Partner GmbH& Co. in 1972. From the very start it was his aim to provide industrywith highly innovative products that would contribute to animproved quality of life for the industry workforce. The newlyestablished company first acted as a marketing company for metaldetectors and bearing testing equipment. In the initial years, itcontinually diversified its range of products while never losing sightof its objective – the maintenance of a high degree of innovation.Eddy current testing equipment, leakage testing equipment,infrared pyrometers and bearing monitoring devices rounded outthe product range. It didn’t take long, however, before the qualityof existing eddy current testing equipment no longer met growingcustomer demands – and the company founder’s expectations.

Consequently, PRÜFTECHNIK developed its own eddy current testerand, in 1977, EDDYCHEK® LAB 2 was presented with great fanfare.The cornerstone for the development of our own equipment andsystems had been laid. LAB 2 went on to become extremelysuccessful, so much so that, apart from the technical offices inGermany, agents could be engaged on the international front,thrusting PRÜFTECHNIK directly onto the global stage. It took onlytwo years before an additional ‘product line’ was established: Withthe development of the inductive bearing assembly device, the new‘maintenance technology’ branch was launched.Throughout the years, PRÜFTECHNIK has continued to remain trueto its principles of innovation and customer benefit as it has

developed new products. Always seeking out pioneering technolo-gies, we have developed a whole range of devices and systems thatmake work easier for our customers around the world. Devices suchas OPTALIGN® – the first laser-optical shaft alignment system – havegiven us a worldwide name for excellence.

controlled, with

e headlines of

arts of technol-

engineers to

o proud!





A product history we’re proud ofMany of these products will go down in history in their particularmarket sector for being truly innovative. We have also had severalvintage years that were particularly successful. We at PRÜFTECHNIKare proud of our accomplishments.

1974 EDDYTESTER The beginnings

1977 EDDYCHEK®

LAB 2 The bestseller1980 EDDYTHERM® A hot itemVIBROCORD® &VIBROSPECT® Good vibrations

1981 ALI 2000 Breaking new ground1984 OPTALIGN® Trailblazer1987 PERMALIGN® Ahead of its time1988 EDDYCHEK® 3 Digital all the way1989 SYSTEM 2 with The challenge

TURBALIGN®

CENTRALIGN®

NOVALIGN®

VIBROSPECT® FFT

1992 X-TECTOR® Small & beautiful1993 OPTALIGN® VP The mega success

VIBROTIP® Got a grip1994 ROTALIGN® Simply the best

EDDYCHEK® SH Hot stuffEDDYCHEK® S Economy tester 1EDDYSENSOR Economy tester 2EDDYCHEK® 4 At the topRotating Systems Smooth runnings

1995 VIBCODE® Playing it safe1996 VIBRONET® It’s all networked1997 OPTALIGN® PLUS One for all

VIBREX®

Under control1998 ROTALIGN® PRO Total alignmentVIBROCORD® Heavy duty

1999 BORALIGN® Mini-CENTRALIGNSignalMaster Goin’ on the Internet

2000 VIBSCANNER® Great expectationsEDDYCHEK® 5 Next generationPARALIGN® Tutti paralletti

2002 smartALIGN® A machine’s best friend2003 smartSCANNER 3 in 1

LEVALIGN® Straight forwardNOVALIGN® Align to a higher level

2004 VIBROWEB® Monitoring via wwwROTALIGN® Ultra Color alignmentVIBXPERT® The challenger

OPTALIGN® (laser-optical shaft alignment), CENTRALIGN® (turbinealignment using lasers), PARALIGN® (measurement of parallelismusing inertial laser gyroscopes) and VIBCODE® (automatic measuringlocation identification) represent quantum leaps in technology thathad a major influence on drive technology and production.



EDDYCHEK® 5

Defects in tube, bar or wire can have

fatal consequences (think of the brake

line in a car). Eddy current testers such asEDDYCHEK® detect the smallest defects

while they are still on the production

line, and grades them for sorting.

1976 First eddy current testing device with a modulardesign for the nondestructive inspection of semi-finished products.

1977 First eddy current testing device with micropro-cessor-based signal processing.

1980 First microprocessor-driven induction heater for

mounting bearings.1981 First alignment computer for shaft alignment withan LCD graphic display.

1982 First high-performance induction heater for largebearings.

1983 First laser-optical shaft alignment system.1985 First eddy current rotating system with a coaxial

construction.1987 First laser-optical coordinate measuring system for

four degrees of freedom.1988 First computer-driven eddy current testing device

with multi-frequency/multi-channel capabilitiesfor defect testing of semi-finished products.

1989 First multifunctional measuring device with asoftkey user interface, insertable program andmemory cards, and insertable hardware modulesto allow configuration of the hardware asrequired.

1990 First optical 5-axial sensor that evaluates a laserbeam simultaneously in five degrees of freedomand transmits the results to a computer via awireless IR system.

1991 First ‘tandem piezo accelerometer’ for vibrationand shock pulse measurement.

1991 First diagnosis and measuring system for rotating

machines; capable of alignment assessment,vibration analysis (FFT), balancing and machinediagnosis.

1992 First ‘intelligent sensor‘ for vibration, bearing andcavitation measurement.

1992 First commercially-available measuring system fordetermining turbine housing alignment by laser-optical methods.





PRUFTECHNIK LTD.Burton Road,Streethay,Lichfield WS13 8LNwww.pruftechnik.co.ukTel.: 01543-417722Fax: 01543-417723eMail: [email protected]

PRUFTECHNIK N.V.Bothastraat 9-13B-2140 Antwerpen, BelgiëTel.: 03/272.56.36Fax: 03/272.40.74Postbus 96NL-5150 AB Drunen, NederlandTel.: 073-518 3009

Fax : 073-511 9368www.pruftechnik.beeMail: [email protected]

PRUFTECHNIK S.A.R.L.Parc d’Activités LavoisierEspace F. LinquetteF - 59494La Petite Forêtwww.pruftechnik.frTéléphone: 03 27 25 52 33Télécopie: 032725 5569eMail: [email protected]

PRUFTECHNIK S.E.A. Pte. Ltd.71 UBI Crescent #08-14Excalibur CentreSingapore 408571www.pruftechnik.com.sgTel.: 382-0662Fax : (065) -382-0776eMail: [email protected]

PRUFTECHNIK Service, Inc.One Greentree Centre, Suite 201Marlton, NJ 08053-3105Phone: (856) 988-5523Fax: (856) [email protected]

PRUFTECHNIK, S.L.C/Frederic Mompou, 3, 4º-2ª B08960 Sant Just Desvern (Barcelona)www.pruftechnik.esTe l. : 93/480.27.00Fax: 93/480.27.05eMail: [email protected]

PRUFTECHNIK S.R.L.Via Pier Della Francesca, 2620090 Trezzano S/N (MI)www.pruftechnik.itTel. : 02/ 4846 30 50

Fax: 02/ 48 463051eMail: [email protected]

PRUFTECHNIK Technology Ltd.51-180 Wroclawul. Sulowska 43www.pruftechnik.com.plTel.: +48 (0)71 326 20 18Fax: +48 (0)71 325 44 39eMail: [email protected]

PRUFTECHNIK WIBREM sp. z o.o.51-180 Wroclawul. Sulowska 43www.pruftechnik.com.plTel.: +48 (0)71 326 20 18Fax: +48 (0)71 325 44 39eMail: [email protected]

PRUFTECHNIK Shanghai Representative OfficeRoom 3.12A

German CenterSiping Road 1233200092 Shanghai, ChinaTel.: +86 (0) 21 65154100Fax : +86 (0) 21 65154100

© C

o p y r i g h t 2 0 0 5 b y P R Ü F T E C H N I K A G

- X X 9 . 6

9 5 . 0

1 . 0

5 . G

- P r i n t e d i n G e r m a n y

Visit us at www.pruftechnik.com

PRÜFTECHNIK AGOskar-Messter-Straße 19-21D-85737 Ismaning, Germanywww.pruftechnik.com

Tel.: +49 89-99616-0Fax: +49 89-99616-200eMail: [email protected]

Documents

Prueftechnik Brochure