Embed Size (px)
Citation preview
PSI « Pétrole Services Industriel »
EPC OIL & GAS
PSI Branches
EPC Contractor delivers project on turn-key basis
Installation of Flowlines
and Pipelines
Electrical installation and
instrumentation
Revamping of industrial
installation
Water Treatment
Manufacturing of process’s
Skids: (Separator, chemical,
injection, metering)
Manufacturing of Well
Head Control Panel
(WHCP)
Provision of highly
experienced and qualified
staff
Maintenance of industrial
installation
MAIN ACTIVITIES
CERTIFICA TES
OFFICE & WORKSHOPS
MAIN CUSTOMERS
REFERENCES
EPC
PROJECT :WELL SITE JET PUMPING INSTALLATION
CLIENT:TOT/OMV
YEAR :2018/2019
LOCATED IN: TUNISIA
SOW:Engineering, Supply of all mechanical, electrical and
instrumentation works
As well as safety equipment installation
PROJECT : CPF NAWARA
CLIENT : MSBI/OMV
YEAR : 2018/2019
LOCATED IN:TUNISIA
SOW : Installation of electrical, instrumentation, telecommunication, fire and gas and control system
• Installation of power cable, distribution board, control panel, junction box, lighting system, earthing and lightning system
• Installation of instrument cable, junction box, PLC system, RTU and ESD system, pressure transmitter, temperature transmitter valves, tubing
and accessories
• Installation of camera, phone and fiber optic cable
• Installation of control system
• Installation of fire and gas detection
• Precommissioning, commissioning and start up
PROJECT: NAWARA PIPELINE E&I INSTALLATION
CLIENT : BIMS/OMV
YEAR : 2017/2018
LOCATED IN:TUNISIA
SOW : Installation of electrical,instrumentation and control system for 12
lines valve station (LVS1 TO LVS12)
• Electrical panel, power cable, junction box
• Instruments ,instruments cables
• Photovoltaic system
• RTU ,camera ,fo cable and phone
• F&G detectors
CLIENT : GAMA / MITSUBISHI SUMITOMO / STEG
YEAR : 2019
LOCATED IN:TUNISIA
SOW : Mounting, installation, testing, connection, mechanical
completion of all electrical, instrumentation, control, security system
and equipment for BOP Rades-C combined cycle power plant
PROJECT : RADES-C COMBINED CYCLE POWER PLANT
PROJECT :GT –GTG E&I Works
CLIENT : GAMA/ MITSUBISHI SUMITOMO / STEG
YEAR : 2019
LOCATED IN:TUNISIA
SOW : Mounting, installation, testing, connection, mechanical completion of all
electrical, instrumentation, control, security system and equipment for GT/GTG &
accessories E&I works in Rades-C combined cycle power plant
CLIENT: MEDCO ENERGI
YEAR: 2015
LOCATED IN: BIR BEN TARTAR TATAOUINE- TUNISIA
SOW: Design & supply of complete CPF facilities
• Manifold and skid of control
• Triphasic separator
• Skid of pumping station
• Skimmer and water treatment unit
• Control room equipped with PLC, DCS and fire and gas detection system
• Electrical room equipped with electrical panel
• Lighting system
• Earthing and lightning protection system
• Storage tank and truck loading system
• Fire-fighting systems
• Pre-commissioning, commissioning & start-up assistance
PROJECT: EPC CONTRACT FOR NEW CPF
PROJECT: E&I WORKS OF GPL GABES STATIONS 06 Sphere GAS (Butane: 3x 4000m3/Propane: 3x 4000m3)
CLIENT: SNDP
YEAR: 2014-2015
LOCALITY: GABES – TUNISIA
SOW: Realization of E&I with fire and gas detection system, for the
following equipment:
• Pumping station for distribution of GPL, butane and propane
• Loading station and counting skids
• Fire protection system
• Control room and electrical room MV/LV transformer grounding
• System and lightning protection control system
• Assistance with precommissioning, commissioning and start-up
PROJECT :INSTALLATION AND ELECTRICAL WORKS ON FLARING PROJECT
CLIENT: TPS
YEAR: 2014-2015
LOCATED IN: GUEBIBA- TUNISIA
SOW: Installation, testing, inspection, pre-commissioning, commissioning of
electrical and instrumentation equipment system "process improvement and
flaring" of Guebiba station:
• A three-phase separator "second internship separator"
• Two new two-phase separators HP and LP "knock out drums"
• A compressor for feeding instrument air circuits
• Lot of piping (process, compressed air, fire, etc.) for the operation of the
new equipment
• Lot of instruments and electrical equipment
• Monitoring system of the whole process through PLCS
PROJECT : EPCI of 2 STORAGE TANKS 2x2000 m3
CLIENT : TPS
YEAR: 2010-2012
LOCATED IN: TUNISIA
SOW:
• Detailed engineering
• Purchasing and supply
• Project management
• Installation of E&I equipements, installations of UV/IR flame
detectors
• Pre-commissionning, commissioning & start-up assistance
PROJECT: INSTRUMENTATION SERVICE OF SOUSSE "C" CAPACITY 400 MW
CLIENT: SNC LAVALIN
YEAR: 2013-2014
LOCATED IN: SOUSSE - TUNISIA
SOW:
• Detailed engineering
• Supply, installation and wiring of the entire station including control panels, PLCS
• Installation and connection of high pressure steel tubing to the panel system, boiler
installation, gas treatment system, filtration system
• Pre-commissioning, commissioning et start up
PROJECT: EPC of 7 FLOWLINES OF DIFFERENT DIAMETERS 4”, 6” & 14”
CLIENT: MEDCO ENERGI
YEAR: 2015/2016
LOCATED IN: BIR BEN TRATAR- TUNISIA
SOW:
• Detailed engineering
• Supply of equipment and accessories including
(anchor blocks, pig traps, pipe rack)
• Prefabrication and manufacture,
(welding, sandblasting, painting, tests)
• Construction on site (leveling, foundation, excavation, road crossings, mechanical works E&I)
• Management and supervision
• Pre-commissioning, commissioning & start-up assistance
• Site remediation and waste management
PROJECT : CONSTRUCTION PIPELINE 10KM 12’’
CLIENT : ENI/ETAP
YEAR : 2018
LOCATED IN:TUNISIA (OUED ZAR-ADAM-OMV)
SOW : Construction & installation of a pipe line ø12 ''
• Supply and installation of optical fiber
• Supply of connection accessories
• NDT control
• Hydraulic test
• Coating of weld joints (hot coating seal)
• Excavation installation of buried line
PROJECT: REALIZATION OF A SEAWATER PUMPING STATION (OFFSHORE) VIA A 90 KM PIPELINE
CLIENT: BEENDER / ENI CONGO
YEAR: 2010
LOCATED IN: CONGO
SOW: Realization of electrical and instrumentation works for a Dgeno-Congo seawater
pumping station (Offshore barge) for injection into wells (On shore) via a 90 km
pipeline.
THE WORK CONSISTS OF:
• Engineering details of the electricity & instrumentation part
• Supply & installation of the electricity & instrumentation part
• Calibrations and calibrations of instruments
• Pre-commissioning, commissionning & start up
PROJECT: ELECTRICAL & INSTRUMENTATION WORKS ON THE WELLHEAD PLATFORM FOR AOUATERRA BENIN
CLIENT: SOCOMENIN / AQUATERRA
YEAR :2014
LOCATED IN: BENIN
SOW: Installation, testing and inspection of all electrical work and instrumentation and platform testing "SAPETRO SEME CSP”
• Installation and connection (tubing and cables) of all instruments, panels and PLCS.
• Installation of all electrical systems including panels in switchgear room, transformers, lighting, MCTS ...
PROCESS & CONTROL EQUIPMENT
PROJECT :GATHERING SYSTEM PIG TRAPS
CLIENT: MEDCO ENERGI
YEAR:2015
LOCATED IN: REMADA - TUNISIA
SOW: Engineering, design, manufacturing, testing,
inspection, packaging and supply of 06 pig traps to be
used for gathering system flow lines, complete with
components and accessories.
- Two (02) Pig Launcher 16”x14” Class 300
- Two (02) Pig Receiver 16”x14” Class 300
- One (01) Pig Launcher 16”x12” Class 300
- One (01) Pig Receiver 16”x12” Class 300
PROJECT : SUPPLY OF 04 PIGs LAUNCHER & RECEIVER (10’’ & 12’’)
CLIENT: IOS / FOUR QUEST ENERGY / SONATRACH
YEAR :2017/2018
LOCATED IN: ALGERIA
SOW: Engineering , design, supply, manufacturing,testing and inspection
of 04 pig launcher & recieiver
- PIG LAUNCHER 10” CLASS 150
- PIG RECIEIVER 10” CLASS 150
- PIG LAUNCHER 12” CLASSE 150
- PIG RECIEIVER 12” CLASSE 150
PROJECT : SUPPLY OF PRESSURE REDUCING STATION
CLIENT: ENI
YEAR :2019
LOCATED IN: OUED ZAR-TUNISIA
SOW: The design materials, fabrication, assembly, inspection
and testing of the pressure reducing skid
Two Pressure Control Valves
Pressure Indicators with manifolds
Manual isolation valves
On-skid piping and fittings
Material for steel structure works
(skid frame and piping supports, lifting lugs, etc.)
Special lifting equipment for transportation
Construction and commissioning & start-up spares
PROJECT: EPC CHEMICAL INJECTION SKIDS
CLIENT: SNDP
YEAR: 2017
LOCATED IN: RADES PORT-TUNIS
SOW: Engineering, supply installation and commissioning of an additive
injection skid with two storage tanks at the fuel depot in La Goulette
• Supply and installation of two dosing pumps with adjustable flow and a manual
pump
• Supply and assembly of two electric stirrers
• Execution of civil works
• Manufacture of reinforced concrete supports for the installation of discharge
pipes
• Manufacture and assembly of two cylindrical storage tanks with a capacity of 1 M³
• Manufacture and assembly of the skid with walkway and shelter
• Manufacture and installation of adf electrical panel and emergency button
• Control installation and commissioning
PROJECT: SUPPLY OF 09 CHEMICAL INJECTION SKIDS
CLIENT: SONATRACH
YEAR: 2017/2018
LOCATED IN: GL2Z COMPLEX BÉTHIOUA ALGERIA
SOW: Supply of 03 anti-scale and anti-foam chemical injection systems for
2010l / A / B/ C desalters and 06 MEA (x32l) anti-foam chemical injection
systems for GL2Z complex:
• Supply of 03 anti-scale / antifoam injection systems for 2010 LA/ LB /LC
desalters: tank, agitator, metering pumps, piping fittings, instrumentation
and accessories
• Supply of 06 mea x32l antifoam injection systems: tray, agitator, metering
pumps, piping fittings, instrumentation and accessories.
• Supply of a lot of spare parts for a period of 02 years of operation of the
supply realization of tests (FAT) in psi workshops
• Commissioning assistance in PSI workshops
PROJECT: EPC OF 03 CHEMICAL INJECTION SKIDS
CLIENT: OMV
YEAR: 2017
LOCATED IN: SOUTH TUNISIA (LOCATED IN AMANI-1, AMANI-2 & MAHA)
SOW: Design, supply, manufacturing, inspection and testing (F.A.T)
of three chemical injection packages fully equipped as detailed below:
corrosion inhibitor (CI) + Biocide type 1 + Biocide type 2
- Chemical injection pumps, and motors
- Lot of instrument & electrical equipment for measurement and control
- Tubing, fitting, and valves
- Power distribution panels for chemical injection skid control
- Skid structures with drain pans
• Engineering
• Manufacturing & hydro test
• FAT
• On-site installation.
• Pre-commissioning, commissioning & start-up assistance
PROJECT: SUPPLY OF TWO (02) CHEMICAL INJECTION SKIDS
CLIENT: MAZARINE
YEAR: 2017
LOCATED IN: SOUTH TUNISIA
SOW: Design, supply, manufacturing, testing and inspection of two
chemical injection skids located in the wells cCAT-1 and DGH-1
each chemical injection skid is equipped
• Tank of 0.4 m³ divided into 2 compartments
(CORROSION INHIBITOR (CI) + METHANOL)
• Injection pumps for each chemical
• Lot of measuring instruments and control
• Power distribution panels for chemical injection skid control
• Lot of tubing and basketwork
• Metallic structure
PROJECT: SUPPLY OF BIOCIDE CHEMICAL INJECTION SKID
CLIENT: EPPM / AGIP-SONATRACH
YEAR: 2016
LOCATED IN: NORTH OF BIR-REABAA -ALGERIA
SOW: Engineering, manufacturing, inspection and testing of the chemical injection packages
fully equipped as detailed below:
- Chemical storage tank capacity 2 m³ 316l stainless steel.
- Chemical injection pumps, and motors
- Lot of instrument & electrical equipment for measurement and control
- Tubing, fitting, and valves
- Skid structures with drain pans
PROJECT: SUPPLY & INSTALLATION OF 02 GAS RECOVERY COMPRESSORS UNIT 100-HP
CLIENT: OMV
YEAR: 2015
LOCATED IN: SFAX- TUNISIA
SOW: Engineering, design, supply (equipment and components) and instrumentation of control system installations and all
that is necessary for a safe and efficient operation of gas recovery compressors unit.
PROJECT: EPC OF A METERING SKID
CLIENT: TPS
YEAR: 2010
LOCATED IN: SFAX- TUNISIA
SOW:
Engineering, procurement, manufacturing,
commissioning and start up
PROJECT: REALIZATION OF FOUR (04) CRUDE REHEATING STATIONS ONAL-GABON
CLIENT: BEENDER GABON
YEAR: 2009
LOCATED IN: GABON
SOW: Realization of the oil storage terminal project of four Onal-Gabon heating stations
• Engineering details of the electricity & instrumentation part
• Supply & installation of the electricity & instrumentation part
• Pre-commissioning, Commissioning and Start up
PROJECT: SUPPLY OF THREE PHASE INLET SEPARATOR MBD-100
CLIENT: MEDCO ENERGI
YEAR: 2014
LOCATED IN: SOUTH TUNISIA
SOW: Design, supply, manufacturing, testing and installation of
a three phase separator MBD-100.
the separator package include :
• Tank with its internals
• Platform, pipe supports and instruments
• Lot of pipes and manual valves
• External painting
• Lot of measuring instruments, control and regulation
• Lot of electrical and accessories
• Third party inspection
PROJECT: EPC OF COMPLETE PRODUCED WATER TREATMENT UNIT
CLIENT: MEDCO ENERGI
YEAR: 2015
LOCATED IN: SUD - TUNISIA (REMADA)
SOW:Engineering, design, supply, installation, commissioning and startup
of complete produced water treatment unit including:
- Holding tank
- Filtration unit
- Booster pump
- Injection pump
- E&I system
- DCS configuration
ELECTRICITY & INSTRUMENTATION EQUIPMENT
PROJECT: LV POWER DISTRIBUTION PANEL AND CENTRALIZES MANAGEMENT SYSTEM
CLIENT : REELEC/SONATRACH
YEAR : 2017/2018
LOCATED IN:ALGERIA
SOW :Manufacturing of a general low voltage table supply and centralized
management system.
• Manufacturing of a general low voltage switchgear with LV 400V withdrawable
circuit breakers; IP 42; equipped with an automatic inverter system with
250KVN 400 V power circuit breakers
• Provision of a centralized management system for the electrical installation
from the control room
• Supply of a lot of spare parts
• Installation and commissioning
PROJECT: 20 CONTROL/DCS PANELS
CLIENT: IINTEGRATION OBJECTS / OMV
YEAR: 2017
LOCATED IN: SOUTH TUNISIA (NAWARA PIPELINE)
SOW:
• Design
• Supply of electrical equipment's and accessories
• Manufacturing of control panel,PLCS
• Factory Acceptance Test (F.A.T), continuity test, dielectric test,
functional test
• Site Acceptance Test (S.A.T), visual check ,running test
• Installation and wiring of 20 control panels and PLC'S
• Pre-commissioning, commissioning and start up
PROJECT: 11 LV POWER DISTRIBUTION PANELS
CLIENT : REELEC / SONATRACH
YEAR : 2018
LOCATED IN :ALGERIA
SOW : Engineering and supply of 11 low voltage switchgear and
power managment system
GHARDAIA TGBT
Secured Table
Table TS1 Pumping Fuels 1
Table TS2 Pomperie Fuels 2
Table TS3 Pomperie Fuels 3
Table TS4 Rescue Motor Force
Tableau TS5 Pomperie RAI Secouru
Instrumentation table
Table TS6 Lighting Cabinets Rescue
TSA Table Power Unsupported Power
Compensation Cabinet
Distribution Box Wash Station
PROJECT:SUPPLY OF 54 WELLHEAD CONTROL PANELS AND SPARE PARTS
CLIENT : SONATRACH / PRODUCTION DIVISION
YEAR : 2019
LOCATED IN :ALGERIA
SOW :Engineering , management, procurement, manufacturing, control and delivery of
54 Wellhead Control Panels and Spare Part
PROJECT: MANUFACTURING OF 02 WELLHEAD CONTROL PANELS
CLIENT : MAZARINE
YEAR :2017
LOCATED IN: TUNISIA
SOW: Design, supply, manufacturing, testing precommissioning,commissioning and start up of 02 wellhead control
panel
PROJECT: FABRICATION OF THE WELL HEAD CONTROL PANEL(WHCP)
CLIENT: TPS
YEAR: 2016
LOCATED IN: CERCINA-SFAX / TUNISIA
SOW:
• Engineering and design of whcp
• Supply of tubing ,instruments and accessories
• Manufacturing and assembly in psi workshop
• Project management
• Factory Acceptance Test (FAT) in PSI workshop
• Site acceptance test
• Precommissioning,commissionnng and start up
PROJECT: SUPPLY OF A SHELTER
CLIENT: ENI TUNISIA
YEAR: 2017
LOCATED IN: MAAMOURA
SOW: Supply and installation of a lighting system, fire detection and fire control system FM200, air conditioning with Atex system,
ventilation, extraction and earthling system
PROJECT: EPC SHELTER LABORATORY OF ANALYSIS
CLIENT: ENI TUNISIA
YEAR: 2016
LOCATED IN: TAZARKA TUNISIA
SOW:
• Engineering
• Supply and installation of a fire & gas detection system
• Supply and installation of an anti-fire control system by FM200
• Factory Acceptance Test (F.A.T)
• On-site installation
• Pre-commissioning, commissioning & start-up assistance
CURRENT PROJECTS
Project
Number Name of the Project SOW Customer Locality / Country
1 Rades C Combined Cycle Power
Plant Project
Realization of the electric BOP lot, instrumentation and
control of the RADES-C combined cycle power station TUNISIA
2 GT –GTG E&I works
Electrical, instrumentation and control works of the Gas
Turbine, Gas Turbine Generator of RADES-C combined
cycle power station
TUNISIA
3
Provision of Chemical Injections
Packages and Services for HBR
Project Development Phase I
Design, procurement, manufacturing, inspection and
transportation of (12 ) chemical injection complete Skids ALGERIA
4 Supply of Wellhead Control
Panels and Spare Parts
Engineering , management, procurement, manufacturing,
control and delivery of 54 Wellhead Control Panels and
Spare Parts
ALGERIA
LABORATORY
EQUIPMENT LIST
Equipment Quantity
Generator 220 KVA 2
Generator 110 KVA 3
Generator 30 KVA 1
Welding machine SMAW 4
Protable Welding machine SMAW 3
Welding machine GMAW 1
Welding machine GTAW 2
Drilling machine 1
Dark room for radio and accessories 1
Sandblaster 1
Diesel Air compressor 7 bars & 12 Bars 2
Electrical Air compressor 7 bars with 100 litres capacity 4
Filling pump 1
Pressure pump 1
Distribution panel 10
Hand drill 20
Angle grinder 25
Heat Gun 15
Megger 5000V 3
Megger 1000V 7
Electrical Tools box 150
Mechanical Tools box 5
Cable drum support 20
Heavy duty cable rollers 50
Scaffolding system CONDOR 500 m²
Scaffolding BG STANDARD 10000 m²
Engin Quantity
Grove Crane 25T 1
Zoomboom 7T 1
Forcklift 5T 1
backhoe 3
Bending machine 6" to 24" 1
Truck with Flat bed IVECO 1
Transportation Quantity
Pick-up 8
Truck Jumper 4
Mico-Bus personnal transport HUNDAY 4
Camp & Facility Quantity
Camping accommodation 200 persons
Camping accommodation 72 persons
ACCOMODATION CAMP ON SITE
Our modular buildings are used for remote accommodation during the exploration phase of oil
and gas drilling, completing, equipping wells, and pipeline installation
Our containerized units include: container offices, living accommodation, kitchens, toilets,
showers, recreation rooms, dining, and workshops.
PSI ACCOMODATION CAMP ON SITE
DESCRIPTION
Item Designation Number of cabin Dimension
1 Accommodation cabin for 08 persons 19 12mx3m
2 Accommodation VIP cabin 1 12mx3.7m
3 Kitchen 1 12mx6m
4 Restaurant 1 12mx9m
5 Freezer and storage negative 1
6 Freezer and storage positive 1
7 Laundry (04 drayer & 05 washing machine) 1 10mx3m
8 Tv room & prayer room 1 12mx3m
9 Red fox for 150 persons 1
10 Osmos unit & filtration unit for 150 persons 1 25' container
11 Tank septic skeep 75m³ 1 75m³
12 Water tank fire fightin 20m³ 1 20m³
13 Water tank 75m³
14 Water tank 30m³ 1 30m³
15 Diesel tank 20m³ 1 20m³
16 Electrical generator 1 250KVA
17 Electrical panel 3
18 Dray store for feeding 1 12mx3m
19 Dray store for beverage 1 12mx3m
20 Gatehouse 1 5mx3m
21 Camera Control 12
WORKSITE FACILITIES :
will house between 150 and 200 workers
GUARD HOUSE: The key focus in camp is safety
12 Camera Controls
CAMP SECURITY - Management & Tracking of Access
HIGH LEVEL OF FIRE SYSTEM
we can deliver turnkey camp solutions which include:
Power generation
Reverse osmosis plants
Fire addressable systems
Restaurant & kitchen: Full Equipped AC, TV
KITCHEN & STORAGE
Negatives & Positive Freezer
Accommodation VIP cabin and Standard cabin for 08 persons
with Air Conditioning
CLINIC: Provide Medical Help
HQ Sfax: Route de Gabes Km11 Z.I THYNA 3084 SFAX
Office in Tunis :Rue Lac Malaren – Résidence le Palais du Golf – les Berges du Lac-1053-Tunis
+216 36 03 1055
+216 +216 24 138 658
www.psi-tunisia.com
