PSNA WebSNMP Agent Network Card.doc

8/11/2019 PSNA WebSNMP Agent Network Card.doc

1/47

PSNA Web/SNMP Agent Network Card

User Manual

Version V1.1Revision date April 26, 2006BOM 31011021

Emerson Network ower provides !"stomers wit# te!#ni!al s"pport. $sers ma% !onta!t t#e nearestEmerson lo!al sales o&&i!e or servi!e !enter.

'op%ri(#t ) 200* +% Emerson Network ower 'o., td..

All ri(#ts reserved. -#e !ontents in t#is do!"ment are s"+ e!t to !#an(e wit#o"t noti!e.

Emerson Network ower 'o., td.

Address/ No.1 e&a Rd., !ien!e nd"str% ark, Nans#an 4istri!t 51 057, #en8#en '#ina

9omepa(e/ www.emersonnetworkpower.!om.!n

E:mail/ s"pport;emersonnetwork.!om.!n
mailto:[email protected]:[email protected]


2/47

Statement

"rpose

-#is +ook is &or A(ent Network 'ard


3/47

Appendi 2/ M:ACA CA10CA11 i(nals < E Mode>. t applies to t#e power s"ppl% s%stem "se M:

ACA CA10CA11 monitorin( mod"le.

Appendi 3/ M500F Alarm Event ist. t applies to t#e power s"ppl% s%stem "se M500F monitorin( mod"le.

?e s"((est %o" to read it +e&ore monitorin( power s"ppl%, &or it will a! "aint %o" t#e meanin(s o& powersi(nals and events d"rin( t#e monitorin( pro!ess.

Appendi */ M500F i(nals < E Mode>. t applies to t#e power s"ppl% s%stem "se M500F monitorin(

mod"le.

Appendi 5/ erial ort ositions. t will a! "aint %o" t#e serial port positions in di&&erent power s"ppl%s%stems.

Appendi 6/ Fast G A. t lists t#e pro+lems and sol"tions d"rin( t#e "sa(e o& NA 'ard. & %o" meet wit#

pro+lem d"rin( operation, %o" !an "i!kl% look t#ro"(# it to &ind sol"tions +e&ore askin( &or te!#ni!als"pport.

Reader @ro"p

-#is +ook is &or/ $sers, te!#ni!al s"pport en(ineers, and servi!e te!#ni!ians.

'onventions

%m+ol

Noti!e/ F"rt#er des!riptions or !a"tions d"rin( t#e operations.

Format

-#e !ontent in =H I= is inp"t &rom terminals, and t#e !ontent in =J K= !an +e a man:ma!#ine inter&a!e, men"name, ta+les or &ield name. -#e slas# =C= is "sed to des!ri+e m"ltilevel men". e.(. J NA !on&i("rationK,represent s"+ men" o& NA 'ard parameters !on&i("ration we+pa(e.


4/47

'ontents

'#apter 1 NA 'ard ntrod"!tion.................................................................................................................................. .... 1

1.1 NA 'ard ntrod"!tion........................................................................................................................... ......... .... 1

1.2 Main -e!#ni!al nde es................................................................................................................................ ......... 1

1.3 -erms................................................................................................................................................................... .. 1

'#apter 2 NA 'ard nstallation........................................................................................................................................ 2

2.1 %stem Re "irements....................................................................................................................................... .... 2

2.2 a!kin( ist..................................................................................................................................................... ...... 2

2.3 NA 'ard 'omponents....................................................................................................................................... 2

2.* nstallation reparation.......................................................................................................................................... 32.5 NA 'ard nstallation...................................................................................................................................... .... 3

'#apter 3 NA 'ard 'on&i("ration Via 9%per -erminalC -elnet.........................................................................................5

3.1 'reatin( 9%per -erminal..................................................................................................................................... ... 5

3.2 o(in And o(o"t................................................................................................................................................... 5

3.2.1 o(in -#e NA 'ard................................................................................................................................ 5

3.2.2 o(o"t................................................................................................................................................. ....... 6

3.3 NA 'ard arameter 'on&i("rations Via 9%per -erminalC-elnet................................................................ ........ 6

3.3.1 Basi! 'ommand 4es!riptions................................................................................................................... .6

3.3.2 arameter 'on&i("rations.................................................................................................................. ........ 7

'#apter * ower Monitorin( Met#od One/ -#ro"(# ?e+ Browser....................................................................................12

*.1 ?e+ Browser 'on&i("ration................................................................................................................................. 12

*.2 o(in NA 'ard -#ro"(# ?e+ Browser............................................................................................................13

*.3 ower Monitorin( 9omepa(e ndrod"!tion....................................................................................................... ..1*

*.* '#e!kin( Operation tates And '"rrent Alarm O& ower "ppl%............................................................. .......... 15

*.5 '#e!kin( ower "ppl% i(nals And tates.................................................................................................. ..... 15

*.5.1 '#e!kin( A' 4istri+"tion i(nals And tates.................................................................................. ........ 15

*.5.2 '#e!kin( 4' 4istri+"tion i(nals And tates.......................................................................................... 15

*.5.3 '#e!kin( Re!ti&ier Mod"le i(nals And tates................................................................................. ....... 16

*.6 ower "ppl% arameters 'on&i("ration And 'ontrol.........................................................................................16

*.6.1 ower "ppl% arameters 'on&i("ration................................................................................................. 16

*.6.2 ower "ppl% 'ontrol...................................................................................................................... ........ 17

*.7 '#e!kin( 9istor% Alarm, Event And NA o(............................................................................................. ...... 17

*.7.1 ower "ppl% 9istor% Alarm..................................................................................................................... 17

*.7.2 ower "ppl% 9istor% Event..................................................................................................................... 17

*.7.3 NA o(................................................................................................................................................. 1

*. NA 'ard %stem 'on&i("ration....................................................................................................................... 1

*. .1 Network arameter et"p........................................................................................................................ 1

*. .2 %stem -ime 'on&i("ration................................................................................................................ ...... 1


5/47

*. .3 ower Name ettin(..................................................................................................................... ......... .. 1

*. .* $ser n&ormation ettin(.................................................................................................................. ........ 1

*. .5 NM A(ent n&ormation 'on&i("ration............................................................................................ ....... 21

*. .6 NM 'on&i("ration................................................................................................................................... 21

*. .7 ower tar 'enter 'on&i("ration......................................................................................................... ..... 23

*. . NA 'ard Firmware $p(rade............................................................................................................. ... 2*

'#apter 5 ower Monitorin( Met#od -wo/ -#ro"(# NM ..................................................................................... ......... ...25

5.1 NM A(ent "pported NM And roto!ol.................................................................................................... .... 25

5.2 ower M B nstallation......................................................................................................................................... 25

5.3 Monitorin( ower -#ro"(# NM ............................................................................................................... ......... .27

5.3.1 A"t#orit%............................................................................................................................................. ...... 27

5.3.2 ower "ppl% Mana(ement................................................................................................................. .... 2

5.3.3 NM 4emonstration................................................................................................................................. 2

'#apter 6 ower Monitorin( Met#od -#ree/ -#ro"(# ower tar...................................................................................... 30

Appendi 1 M:ACA CA10CA11 Alarm Event ist..............................................................................................................31

Appendi 2 M:ACA CA10CA11 i(nals < E Mode>.................................................................................................... ....... 32

Appendi 3 M500F Alarm Event ist.................................................................................................................................. 33

Appendi * M500F i(nals < E Mode>.................................................................................................................... ......... .. 35

Appendi 5 erial ort ositions........................................................................................................................................ 3

Appendi 6 -ro"+les#ootin(.............................................................................................................................. ......... ....... *06.1 nstallation G A................................................................................................................................................... *0

6.2 R"nnin( G A.......................................................................................................................................................*0

6.3 ?e+ Monitorin( G A........................................................................................................................................... *1

6.* NM Monitorin( G A................................................................................................................................... ....... *1

6.5 ower tar Monitorin( G A................................................................................................................... ......... ..... *2


6/47

Chapter 1 PSNA Card Introduction

-#is !#apter will +rie&l% introd"!e t#e &eat"res and te!#ni!al spe!i&i!ations o& NA 'ard and spe!ial terms "sed in

t#is +ook.

1.1 NA 'ard ntrod"!tion

-#anks &or sele!tin( EmersonLs power s"ppl% network !ard < NA ?e+C NM A(ent>.

NA ?e+C NM A(ent Network 'ard < NA 'ard> V2.00 allows %o" to monitor power s"ppl% t#ro"(# network +%t#e &ollowin( t#ree means/

1. Network mana(ement station , and make "se o& t#e NM a(ent &"n!tion provided +% t#e NA 'ard to monitor power s"ppl%.

2. ?e+ +rowser, make "se o& ?e+ server &"n!tion o& t#e NA !ard.

3. ower tar so&tware, t#ro"(# t#e network inter&a!e provided +% t#e NA 'ard.

-#e NA !ard !an make %o"r power s"ppl% a real network power s"ppl%. As &ar as t#e network is !onne!ted, %o"!an !ontrol over it t#ro"(# an% !omp"ter installed wit# NM or ?e+ +rowser at an% time via t#e NA 'ard.

1.2 Main -e!#ni!al nde es

Applied to t#e power s"ppl% t%pe/ t#e power s"ppl% "sed M:ACA CA10CA11 and M500F monitorin( mod"le.

Applied network/ 10C100MB Et#ernet, adapt a"tomati!all%.

"pport ?e+ +rowser n"m+er visitin( at t#e same time/ ei(#t "sers ma im"m !an a!!ess it sim"ltaneo"sl%,

and s"pportin( '#inese and En(lis# to +rowse at one time.

"pport NM n"m+er visitin( at t#e same time/ ei(#t ma im"m , s"pportin( NM v1 version.

"pport ower tar n"m+er visitin( at t#e same time/ ei(#t

o( !apa!it% o& NA 'ard/ ninet% re!ords.

1.3 -erms

/ 'omm"ni!ation power s"ppl% s%stem. t re&ers to series 'omm"ni!ation power s"ppl% s%stem made +%Emerson Network ower 'o., td.

NA/ ower %stem Network Adapter

NM / Network Mana(ement tation , s"!# as 9 OpenView, BM NetView or Novell Mana(e?ise, et!

NM / imple Network Mana(ement roto!ol

M B/ Mana(ement n&ormation Base

9-- / 9%per-e t -rans&er roto!ol

?e+ Browser/ -#at is we+ pa(e +rowser s"!# as nternet E plorer et!.

ower tar/ series power network monitorin( so&tware developed +% Emerson Network ower 'o., td. ower tar o+tain t#e real time data and alarm o& t#e power t#ro"(# -' C proto!ol &rom NA 'ard, and ower tar !anmana(e m"lti:power s"pplies at one time.


7/47

2 '#apter 2 NA 'ard nstallation

Chapter PSNA Card Installation

-#is !#apter will des!ri+e s%stem re "irement &or installin( t#e NA 'ard, t#e !ard p#%si!al str"!t"re, as well as t#e

installation pro!ed"res.

2.1 %stem Re "irements

o lon( as t#e !omm"ni!ation power s"ppl% #as :ACA CA10CA11 or M500F monitorin( mod"le, %o" !an installNA 'ard. B"t i& %o" want to "se NA 'ard to monitor t#e power s"ppl%, t#e &ollowin( !onditions m"st +e

satis&ied.

1. 9ave 10 or 100M Et#ernet, s"pport -' C proto!ol.

2. 'omp"ter wit# one o& t#e so&tware installed/

?e+ +rowser/ nternet E plorer 5.0 or a+ove

NM !ompati+le wit# NM v1 proto!ol/ 9 OpenView, BM NetView, Novell Mana(e?ise, "nNet Mana(er,

et!.

ower s"ppl% network monitorin( so&tware/ ower tar

2.2 a!kin( ist

-#e NA 'ard pa!ka(e !ontains -#is +ook

& an% o& t#e a+ove is missed, !onta!t %o"r s"pplier immediatel%.

1! Note

The power supply cable and power transfer cable are optional accessories. If the monitoring module model of your power supplysystem is PSM A/A9/A1 /A11! you should choose the power supply cable "the input end of the cable connected to 1#$dc outputof the power supply system%. If the monitoring module model of your power supply system is M& '! you should choose the

power transfer cable "the input end of the cable connected to (## soc)et of the monitoring module bac)board%. *therwise! thePS+A card may be damaged.

2.3 NA 'ard 'omponents

! Warning

Some electronic components on the PS+A card are sensiti,e to static electricity. -o not touch the circuit or components withhands or through electrified articles! otherwise the card might be damaged. +on designated person must not open the PS+A ardcase.

NA 'ard is +"ild:e ternal mod"le !onstr"!tion. ee Fi("re2:1.

* 3 1 2

5 6

Figure 2-1 PSNA card

NA ?e+C NM A(ent Network 'ard $ser Man"al


8/47


9/47

* '#apter 2 NA 'ard nstallation

nitiali8in( &irmware "pdatin( environment... "!!ess.nitiali8in( --DC-elnet servi!es... "!!ess.nitiali8in( a"to:sear!#:noti&i!ation task... "!!ess.nitiali8in( NM a(ent... "!!ess.nitiali8in( we+ server... "!!ess.nitiali8in( ower tar server... "!!ess.

NA ?e+C NM A(ent adapter startin( is doneNA ?e+C NM A(ent Adapter

'op%ri(#t 2002:2006, EMER ON Network ower 'o., td.

I $ser name/

'on(rat"lations Do"Lve &inis#ed t#e p#%si!al installation o& NA 'ard s"!!ess&"ll%.

B"t, i& %o" &ind t#e p#enomenon/

@reen li(#t o&&/ lease !#e!k w#et#er t#e power s"ppl% o& NA 'ard is normal or not, and t#e !onne!tion o&

power s"ppl% is normal or not.

@reen li(#t +links ever% &ive se!onds/ it indi!ates t#at t#e NA 'ard !annot dete!t t#e power s"ppl% s%stem

and !annot !omm"ni!ate wit# monitorin( mod"le. NA 'ard !an identi&% M : AC A C A10C A11 and M500Fmonitorin( mod"le a"tomati!all%.

Dellow li(#t OFF/ lease !#e!k t#e network !a+le and w#et#er t#e NA is !onne!ted to t#e network. -#e

%ellow li(#t is ON onl% w#en t#e network !onne!tion is normal.

"! Note

1. If the PS+A ard is installed for the first time! you must configure the PS+A ard IP address! baud rate! system time ,ia0yper Terminal before using eb browser! PowerStar or +MS ,isit PS+A ard. See 3.3.2 Parameter Configurations .

#. If the PS+A ard cannot communicate with the power supply monitor module after configuring correct baud rate! chec) thecorrectness of hardware connections. +e2t chec) if the serial port baud rate of the PS+A card is the same with that of themonitoring module. hec) if the ,ersion of the PS+A networ) card match the power supply system.



10/47

'#apter 3 NA 'ard 'on&i("ration Via 9%per -erminalC -elnet 5

Chapter " PSNA Card Con#iguration $ia %&per 'erminal/ 'elnet

-#e +asi! !on&i("rations o& NA 'ard !an +e done t#ro"(# 9%per -erminal or -elnet. -#e +asi!

!on&i("rations involve t#e address o& NA 'ard, +a"d rate o& NA 'ard to monitorin( mod"le. -#is !#apterdes!ri+es #ow to !on&i("re +asi! !on&i("rations o& NA 'ard t#ro"(# --D and -elnet.

-#e parameters !an +e !on&i("red t#ro"(# two wa%s/

1. --D

2. -elnet.

For t#e NA 'ard, t#e inter&a!es and &"n!tions o& t#e two modes are t#e same. -#e di&&eren!es lie in t#e so&twareand pro!ess w#en !onne!t wit# NA 'ard.

3.1 'reatin( 9%per -erminal

& it is t#e &irst time %o" install t#e NA or %o" donLt know its address, %o" m"st "se --D to !on&i("re NA 'ardparameters.

-#e 9%per -erminal is a tool o& ?indows, t#e detailed settin( "p and startin( !an re&er to t#e !omp"ter operationman"al. ?#en !reatin( 9%per -erminal, serial port n"m+er "ses t#at o& !onne!tin( !omp"ter to t#e power s"ppl%.-#e 9%per -erminal serial port is !on&i("red as &ollows/

arameter Val"eBa"d rate 3 *00+ps4ata +itarit% !#e!ko"t nonetop +it 1Flow !ontrol none

(! Note

If the PS+A has been started! press 34+T456 )ey! you will see login interface.

3.2 o(in And o(o"t

3.2.1 o(in -#e NA 'ard

& %o" #ave alread% know t#e NA address, %o" ma% modi&% or !on&i("re t#e parameters t#ro"(# -elnet.

-#e !ommand is P-elnetQ in operation s%stem. np"t telnet NA 'ard AddressQ dire!tl% in t#e !ommand, s"!#as Ptelnet 10.63.0. 1Q, %o" will lo(in t#e NA 'ard and will +e prompted lo(in in&ormation.

-#e detailed in&ormation o& "sin( --D to lo(in t#e NA 'ard !an re&er to t#e !omp"ter operation man"al. A&ter lo(in NA 'ard t#ro"(# eit#er --D or -elnet, %o" will see t#e lo(in in&ormation +elow/

NA ?e+C NM A(ent Adapter

'op%ri(#t 2002:2006, EMER ON

Network ower 'o., td.

I $ser name /

Enter %o"r $ser name and assword . & %o" lo(in s"!!ess&"ll%, %o" will see t#e!ommand prompt/ 'OMMAN4/I



11/47

6 '#apter 3 NA 'ard 'on&i("ration Via 9%per -erminalC -elnet

& t#e "ser name or password is wron(, %o" !annot lo(in t#e NA 'ard, and t#e s%stem will prompt "sername andpassword a(ain.

)! Important

1. *nly administrator with user name 3admin6 is allowed to login the PS+A through TT7/telnet.

#. The default password for 3admin6 is 31#86.

8. Pay attention to the small letter and capital letter of the password! which are seen as different code. eep an eye on the aps:oc) light on your )eypad.

;. 'or telnet mode! only one user can be logged on at a time. If other users want to log in at the same time! the system will refusethem.

3.2.2 o(o"t

Manuall& logout

A&ter t#e !on&i("ration, %o" ma% t%pe P o(o"tQ to e it t#e s%stem.

Auto logout

& %o" do not operate t#e s%stem &or 5min, to ens"re s%stem se!"rit%, %o" will +e lo((ed o"t t#e NA a"tomati!all%.*elogin a#ter logout

& %o" are "sin( --D, %o" ma% "st re:enter %o"r "ser name and password, and t#en %o" !an lo(in t#e NA a(ain.B"t, &or -elnet, %o" #ave to re+"ild t#e -elnet !onne!tion.

3.3 NA 'ard arameter 'on&i("rations Via 9%per -erminalC-elnet

3.3.1 Basi! 'ommand 4es!riptions

'ommand E planation 4es!riptionet p et address et t#e NA 'ard address, s"+net mask and (atewa% address

etBa"d et +a"d rate o& serial portet t#e +a"d rate &or !omm"ni!atin( +etween t#e NA 'ard and t#epower s"ppl% monitor

assword Modi&% password Modi&% adminLs password"perNM et"p s"per NM et"p NM parameters wit# administer p"rviewower tar et"p s"pervision !enter et"p s"pervision !enter parameters o& ower tar $ser et"p "sers in&ormation Addin( NA 'ard "ser, t#e ma im"m is .-ime et time et t#e !"rrent time o& NA 'ard

-imeserver et time server et t#e address o& time server t#at !an !orre!t t#e NA timea"tomati!all%.

in( '#e!k t#e network stat"s '#e!k w#et#er t#e address is rea!#a+le4ownload -o "p(rade t#e &irmware o& t#e NA -o "p(rade t#e &irmware o& t#e NA "sin( -F- server

A&ter lo(in NA 'ard via --D or -elnet, t%pe P Q a&ter P'OMMAN4/IQ, t#e s%stem will prompt all t#e !ommands andt#e meanin(s.

I $ser name/ adminI assword/ 'OMMAN4/I

4ownload9elp!ommands9istor%o(o"tasswordin(rea!#a+le

ower tar etBa"det p"perNM

4ownload &ile and re&res# t#e &las#4ispla% t#is +rie& #elp messa(e a+o"t all

4ispla% !ontents in !ommand #istor%o(o"t &rom t#e !"rrent !onsole'#an(e administratorSs passwordend e!#o messa(es to test networks

et ower tar 'enter in&ormationet sampler port +a"d rateet NA !ard Addresset s"per NM in&ormation



12/47


-ime-imeserver $ser 'OMMAN4/I

et s%stem timeet time server et "ser in&ormation

3.3.2 arameter 'on&i("rations

-%pe t#e !ommand name +e#ind P'OMMAN4/IQ, and +e(in to set !orrespondin( parameters. -#e val"e inside t#eJ K is !"rrent val"e o& t#e parameter. & %o" enter not#in( and press EN-ER ke%, t#en t#e settin( remains. & %o" wantto modi&% it, inp"t t#e desired val"e at t#e end o& t#e !ommand and press EN-ER ke%.

+! %int

hen typing command! the PS+A can identify it by gi,en the initial se,eral letters! so you need not type the full words! e.g. SetIstands for SetIp! P for Password! : for :ogout.

Set IP, set the IP address and subnet mask o# the PSNA Card!

-! Note

If it is the first time you install the PS+A or transfer it to another networ)! you must configure the parameter e.g. IP address usingTT7. 7ou may also reconfigure the IP address of the PS+A after login through the old IP address in telnet mode.

ettin( met#od/ 'OMMAN4/I et p

ettin( pro!ess/

'on&i( t#e +oardSs address, s"+net mask and de&a"lt (atewa%.

-#is +oardSs AN address J100.100.100.100K 10.63.0. 1 "+net mask &or AN J255.255.255.0K 255.255.25*.0 #o"ld t#ere +e a de&a"lt (atewa% &or pa!ket ro"tin( JDK ?#at is its address J0.0.0.0K10.63.0.1nter&a!e e planation/ address o& NA 'ard J100.100.100.100.100K10.63.0. 1

"+net mask J255.255.255.0K255.255.25*.0 #o"ld t#ere +e a de&a"lt (atewa% &or pa!ket ro"tin( JDK?#at is its address J0.0.0.0K10.63.0.1

-#e de&a"lt address o& NA 'ard is 100.100.100.100, s"+net mask/ 255.255.255.0, de&a"lt (atewa%/ 0.0.0.0.

& %o" !#an(e an% o& t#e a+ove parameters, t#e NA 'ard will restart a&ter 5s.

A&ter t#e NA 'ard is started s"!!ess&"ll%, please "se P in(Q !ommand to !#e!k w#et#er t#e NA 'ard isa!!essi+le. & t#e repl% is timeo"t mistake, !#e!k t#e !orre!tness o& network !on&i("rations and !a+le !onne!tion.

Set.aud, set .aud rate

ettin( met#od/ 'OMMAN4/I etBa"d

ettin( pro!ess/'OMMAN4/Iset+a"dBa"d rate &or sampler serial !#annelsJ 600K 600et +a"d s"!!ess.nter&a!e e planation/Ba"d rate &or sampler serial !#annelsJ 600K 600et +a"d s"!!ess.& !"rrent power s"ppl% !omm"ni!ation is normal, t#e +a"d rate !an not +e modi&ied. 4ispla%/'"rrent +a"d rate &or sampler serial port is 600 +ps-#e !omm"ni!ation state wit# ower %stem is O , not#in( need +e modi&ied.

! Note

'or PSM A/A9/A1 /A11 and M& ' monitoring module! the default baud rate for data sampler serial port is set at 9< bps.



13/47

'#apter 3 NA 'ard 'on&i("ration Via 9%per -erminalC -elnet

Password, change admin0s password!

! Suggestion

=ecause the admin has the highest authority! to ensure system safety! you are recommended to change the password immediatelyafter the installation or firmware upgrade of PS+A ard.

12! Warning-o learn by heart the admin>s password. If you forget it! you cannot configure PS+A ard ,ia TTP/Telnet or e,en ,isit thePS+A.

In case you forget the password! please contact your local supplier.

ettin( met#od/ 'OMMAN4/I assword

ettin( pro!ess/


14/47

'#apter 3 NA 'ard 'on&i("ration Via 9%per -erminalC -elnet

ower tar et ower tar 'enter s"!!ess.

1 ! Note

The PowerStar enter setup through TT7/Telnet possesses control authority and can fulfill all the functions needed byPowerStar.

If PowerStar ?ust has browser function and can not setup and control power supply! then change the accessing authority of the

PowerStar enter to 3@uerying authority6 on webpage.

User, setup user in#ormation

An administrator PadminQ is added a"tomati!all% a&ter t#e &irst start o& NA 'ard, and its "ser name and a"t#orit%!annot +e modi&ied. -#e ot#er "sers !an +e added a&ter lo(in +% admin.

ettin( met#od/ 'OMMAN4/I$ser

ettin( pro!ess/

'OMMAN4/I$ser $ser nameJ"serK "ser1asswordJ123K 123*5

A!!ess a"t#orit%


15/47

10 '#apter 3 NA 'ard 'on&i("ration Via 9%per -erminalC -elnet

1)! Note

The date and time of PS+A ard need not to be setup commonly. After starting! PS+A ard can get proper time from Timeser,er when using Timeser,er to ad?ust time. If Timeser,er is not used or not running on networ)! when PS+A ard communicates withmonitoring module! it will get time from monitoring module and setup time. So if there is neither using Timeser,er norcommunicating with monitoring module! the time in the log of PS+A ard is the default time "# #/ &/ 1% and is not the actualtime.

'imeser5er, set 'imeser5er

ettin( met#od/ 'OMMAN4/I-imeserver

ettin( pro!ess/

'OMMAN4/I-ime erver -#e primar% time server addressJ0.0.0.0K 10.76.12.75-#e se!ondar% time server addressJ0.0.0.0K 10.76.12.56nterval to s%n!#roni8e time in min"tes J720K60'OMMAN4/I

nter&a!e e planation/-#e primar% time server address J0.0.0.0K / 10.76.12.75

-#e se!ondar% time server address J0.0.0.0K / 10.76.12.56nterval to s%n!#roni8e time in min"tes


16/47


'OMMAN4/Idownload-#e #ost addressJ100.100.100.200K 10.63.0.22*-#e &ile nameJ"wsa.+inK "wsa:00:00:20.+in

4ownload startin(...-F- download start.4ownloadin(, please wait...-#e !ard will a"to reset a&ter download ok. ass !#e!k , lease wait &or re&res# F A 9.tart to erase !#ipERA E "!!ess..?arnin( tart "pdata F A 9 .................................................ro(ram re&res# O ...lease wait &or t#e NA resettin( . nter&a!e e planation/R"nnin( t#e #ost address o& -F- server J10.76.12.56K/ 10.63.0.22*

-#e name o& &ile "sed &or &irmware "p(rade J"wsa.+inK "wsa:00:00:20.+in

tartin( "p(rade, please wait.. A&ter "p(rade &inis#ed, NA 'ard will restart a"tomati!all%.

1 ! Note

Tri,ial 'ile Transfer Protocol "T'TP% is used to load software for embedded systems. It is one of the T P/ IP protocols and for to transfer tri,ial files between clients and ser,ers. It supplies little cost ser,ice for tri,ial filetransfer.

PIN7, check network connection

N@ !ommand is to test w#et#er t#e data &rom t#e NA 'ard !an +e sent to !ertain !omp"ter on t#e network.'OMMAN4/Ipin( end e!#o messa(es to test networks rea!#a+le.$sa(e/ pin( #ost J:! !o"ntK J:s pa!ketsi8eK J:t timeo"tK

options/:! !o"nt:t timeo"t

:s pa!ketsi8e

N"m+er o& e!#o re "ests to send.From 1 to 21*7* 36*7-imeo"t in millise!onds to wait &or ea!# repl%.From 1ms to 300000ms.pe!i&ies t#e n"m+er o& data +%tes to +e sent.From 20 to 100.-#e de&a"lt is 56.

e.(. / pin( 10.100.1.2 :! 100nter&a!e e planation/N@ "sa(e/

#ost/:! !o"nt/:t timeo"t/

N@ #ost J:! !o"ntK J:s pa!ketsi8eK J:t timeo"tK address o& t#e tested #ost

testin( !o"nt-imeo"t in millise!onds to wait &or ea!# repl%. & t#e repl% &orm#e #ost is not re!eived in a !er tain time, t#en t#e #ost is!onsidered as not rea!#a+le.

:s pa!ketsi8e pe!i&ies t#e n"m+er o& data +%tes to +e sent.e.(./ pin( 10.100.1.2 :! 100



17/47

12 '#apter * ower Monitorin( Met#od One/ -#ro"(# ?e+ Browser

Chapter ( Power Monitoring Method 8ne, 'hrough Web .rowser

-#ro"(# ?e+ +rowser and t#e NA 'ard +"ild:in ?e+ server, %o" !an real time monitor power state and

inp"tCo"tp"t si(nals, send power !ommand, !on&i("re power r"nnin( parameters, view power !"rrent C#istor% alarmsand "ser !ontrol re!ords, view NA 'ard lo(, set t#e NA 'ard parameters < address, "ser and NMparameters, et!.>, "p(rade NA 'ard so&tware.

*.1 ?e+ Browser 'on&i("ration

Be&ore "sin( ?e+ +rowser to monitor power, please veri&% t#e t%pe o& t#e !"rrent +rowser and t#at its !on&i("ration!an meet t#e re "irement as &ollows/

1. Browser t%pe and version

?#en "sed we+ server o& NA 'ard, please "se t#e &ollowin( +rowser/

nternet E plorer 5.0 ( E 5.0 ) or a+ove

For t#e ot#er lower version o& we+ +rowsers s"!# as E or Nets!ape Navi(ator, i& it !an s"pport 9-- 1.1, 9-M *.0,and ava !ript1.0 , NA 'ard !an provide !omplete s"pport +"t not ens"re.

'#ineseCEn(lis# s"pport/ NA 'ard !an s"pport '#ineseCEn(lis# ?e+ +rowser.

2. Ena+le !ookie s"pport

-#e NA 'ard need 'ookies to save data temporaril%, please allow %o"r +rowser to a!!ept 'ookies t#at is toena+le 'ookie s"pport. & %o" disa+le 'ookie o"t o& se!"rit% !on!ern, %o" !annot "se some a"tomati! &"n!tions, +"t itdoesnSt prevent %o" &rom "sin( t#e +asi! &"n!tion o& t#e NA 'ard.

-#e met#od &or !ommonl% startin( ?e+ +rowser/

nternet E plorer 5.0 < E 5.0> '#inese version to start 'ookie/

Men" J-oolC nternet OptionsC e!"rit%C'"stom evelC'ookiesCAllow per:session !ookiesC Ena+leK

3. tart (rap#i! and animation displa%

Do"r +rowser m"st +e a+le to displa% (rap#i! and animation.

*. ?e+pa(e !a!#e settin(

Browsers "se 'a!#e to in!rease we+pa(e displa% speed. ?#en %o" visit we+pa(esin t#e 'a!#e, t#e +rowser will !#e!k w#et#er t#ere is an% new version o& t#em in ?e+ server a!!ordin( to t#e!on&i("ration +elow/

'#e!k ever% time visitin( we+pa(es

'#e!k ever% time startin( t#e +rowser

No !#e!k.

On visitin( t#e NA 'ard, t#e !on&i("ration m"st +e = '#e!k ever% time visitin( t#e we+pa(es= ot#erwise, t#epa(e !annot +e displa%ed normall%. -#e !ommon "sa(e &or we++rowser is as &ollowin(/

-#e met#od o& !#an(in( 'a!#e options &or E*.0C5.0 is as &ollows/

Men" J'#e!k C nternet Options C @eneralC nternet -emporar% &iles C ettin(s C '#e!k &or newer version o& storedpa(es C '#e!k ever% time visitin( we+pa(esK

5. Monitor de&inition and +rowser &ont settin(

?e re!ommend %o" to set t#e monitor de&inition at 00 600 or a+ove ot#erwise, t#e pa(e


18/47

'#apter * ower Monitorin( Met#od One/ -#ro"(# ?e+ Browser 13

tart ?e+ +rowser, t%pe t#e NA address, t#en %o" will see t#e lo(in inter&a!e , t#en %o" !an operate power monitorin(.

1 ! %int

If the ard is new or ?ust upgraded! and you do not reset new user through TT7/Telnet! then you must login with user nameFadminF and its password. If you ha,e not changed the password through 0yper Terminal/Telnet! the default is F1#8F.

The default homepage of PS+A ard is in 4nglish. If indows operation system is hinese! then it will change to hinesehomepage automatically when the 4nglish homepage is opened for the first time.

Figure 4-2 Power monitoring homepage

2. o(o"t

'lose E +rowser to e it t#e NA #oma(e.

2! Warning

If you are administrator or ha,e power supply control authority! do remember to close the browser when you finish ,isitingPS+A ard. *therwise! if other person uses send control command through your browser! the conse@uence might be serious.



19/47

1* '#apter * ower Monitorin( Met#od One/ -#ro"(# ?e+ Browser

*.3 ower Monitorin( 9omepa(e ndrod"!tion

ower monitorin( #omepa(e

1! %int

The PS+A ard can show corresponding sub manual according to the authority of login user automatically. *nly the person whohas administrator authority can ,iew all of the sub menus.

3. ?e+pa(e displa% main area

-#e !ontents o& we+pa(e displa% main area s#ows !orrespondin( si(nals and states a!!ordin( to !li!kin( di&&erentmen".

*. '"rrent alarmin( displa% area

'"rrent alarmin( displa% area s#ows !"rrent alarmin( o& power and "pdatin( a"tomati!all%.

! %int

PS+A ard can detect monitoring model automatically. Since different monitoring model has different monitoring parameters!your interface actual ,iewing may not be e2actly the same with the diagram in this boo).



20/47


*.* '#e!kin( Operation tates And '"rrent Alarm O& ower "ppl%

-#e main state area '"rrent alwa%s s#ows operatin( states o& ower, and !"rrent alarm area alwa%s s#ows !"rrentalarmin( !ontents. Main states and !"rent alarmin( are "pdatin( a"tomati!all%. No matter w#at %o" view t#e ot#ersi(nals or !ond"t operatin( or set"p s%stem parameters, %o" !an view t#e power states at an% moment.

*.5 '#e!kin( ower "ppl% i(nals And tates

E !ept overview si(nals on t#e #omepa(e, ea!# part si(nals and states o& t#e power s"ppl% !an +e viewed.

*.5.1 '#e!kin( A' 4istri+"tion i(nals And tates

'li!k on t#e man"al J A'4n , t#e si(nals and state we+pa(e o& !orrespondin( A' distri+"tion are s#own. eeFi("re *:3.

Figure 4- A! distribution signals and states

"! Color 6enotation

=lueE normalG

5edE alarm. Please chec) the corresponding power state signal and ta)e action.

*.5.2 '#e!kin( 4' 4istri+"tion i(nals And tates

'li!k on t#e man"al J 4'4nK, t#e si(nals and state we+pa(e o& !orrespondin( 4' distri+"tion are s#own. ee Fi("re*:*.



21/47


Figure 4-4 "! distribution signals and states

(! Color 6enotation

=lueE normalG

5edE alarm. Please chec) the corresponding power state signal and ta)e action.

*.5.3 '#e!kin( Re!ti&ier Mod"le i(nals And tates

'li!k on t#e man"al J 4'4nK, t#e si(nals and state we+pa(e o& !orrespondin( 4' distri+"tion are s#own. ee Fi("re*:5.

Figure 4-# $ectifier module signals and states

*.6 ower "ppl% arameters 'on&i("ration And 'ontrol

)! %int

1. *nly users with 3system administrator6 or with 3control6 authority can configure parameters or control power operation! otherusers can only ,iew current configurations.

#. The PS+A ard will record all the operations done to the power supply.

*.6.1 ower "ppl% arameters 'on&i("ration

-#ere are power s"ppl% parameters in !ommon "se !an +e set"p in overview si(nals. -#e% are/ 4'4 Over Volta(eoint, 4' $nder Volta(e oint, Batter% Over '"rrent oint, Over -emperat"re oint, A'4 Over Volta(e oint, A'4$nder Volta(e oint, and %stem 'ontrol Mode.

+! %int

1. =efore setup power supply parameters! the meaning of corresponding parameters and power must understand clearly!otherwise it may result in serious conse@uence.

#. The configuration for any parameters must be satisfied to the re@uirements of power supply. If parameter setup is failed! pleaseloo) o,er related power supply manual.

8. The PS+A ard will record all the parameters setup done to the power.



22/47


*.6.2 ower "ppl% 'ontrol

-#ere is +atter%:!#ar(in( mode in overview si(nals, and t#ere is Re!ti&ier Mod"leONCOFF , Re!ti&ier Mod"le '"rrent imitin( oint, and Re!ti&ier Mod"leVolta(e in re!ti&ier mod"le si(nals. All o& a+ove are t#e si(nals and states t#at !an +e !ontrolled.

-! %int

1. =efore control power supply! the meaning of corresponding parameters and power supply must understand clear! otherwise itmay result in serious conse@uence.

#. The control for any parameters must be satisfied to the re@uirements of power supply. If control is failed! please loo) o,errelated power supply manual.

8. =efore control power supply! 3System ontrol Mode6 in o,er,iew signals must be set as 3Manual6.

;. urrent limiting point and ,oltage control on any one of the rectifier module will control on all of the rectifier modules of the power system at the same time.

&. The PS+A ard will record all the parameters setup done to the power.

*.7 '#e!kin( 9istor% Alarm, Event And NA o(

*.7.1 ower "ppl% 9istor% Alarm

ele!t J9istor% AlarmK, %o" will see power s"ppl% #istor% alarm messa(es


23/47


Figure 4-' Power suppl& histor& e(ent

! %int

(ust PSM A9/A1 /A11 and M& ' monitoring module has history e,ent message and PSM A monitoring module does not ha,ehistory e,ent message temporarily.

*.7.3 NA o(

ele!t J NA o(K, %o" will see NA 'ard lo( messa(es , %o" !an !#an(e t#e NA 'ard address, s"+net mask and de&a"lt(atewa% address #ere.

Figure4-+ PSNA card networ, parameter setup

Enter t#e new parameters and press J et Network arameterK to save t#em. & %o" #ave done an% modi&i!ation, t#eNA 'ard will +e restarted 5 se!onds later a"tomati!all% i& %o" #ave !#an(ed t#e address, %o" s#o"ld "se t#e

new address to visit t#e NA 'ard.



24/47


"1! Warning

1. -o not set the networ) parameters randomly. If the ard IP address conflicts with that of other e@uipment "li)e P %! the PS+Aard or other e@uipment will be not accessed. So youHd better consult the networ) administrator in your company for yournetwor) parameters.

#. If networ) parameters such as IP address of PS+A ard are modified! the connection between the PS+A ard and PowerStar!I4 and +MS will be interrupted when the PS+A ard is restarted due to networ) parameter modification. Please reconfigurerele,ant PowerStar and +MS after IP address modification.

*. .2 %stem -ime 'on&i("ration

ele!t J NA 'on&i(K, %o" will see t#e NA 'ard 4ata -ime !on&i("ration s!reen.

Do" !an set !"rrent time and time server address &or t#e NA 'ard in t#e NA 'ard 4ata -ime !on&i("rationwe+pa(e < ee Fi("re *:10>.

4"rin( t#e NA 'ard s%stem time settin(, %o" ma% !#oose

Ad "st time a"tomati!all% +% -imeserver

Ad "st time +% t#e spe!i&% time

& %o" !#oose time server, please enter primar% and se!ondar% time server address. ?#en settin( P0.0.0.0Q, itrepresent none. -imeserver re&ers to t#e time server t#at r"nnin( wit# NA 'ard on t#e same network and s"pportRF' 6 -ime Ad "st roto!ol.

& %o" !#oose = pe!i&% time=, %o" !an inp"t time +% %o"rsel& or !li!k J@et o!al -imeK to o+tain t#e time +% t#e!omp"ter t#at is visitin( t#e 'ard as t#e !"rrent time.

Figure 4-1 PSNA card date . time setting

A&ter t#e time settin(, !li!k J et NA -imeK to save.

" ! Note

1. The local time one of PS+A ard must be setup through TT7/Telnet before its formal application! otherwise the ad?ustingtime from Timeser,er will be wrong.

#. It must ma)e sure that the Timeser,er of the networ) is in proper operation when setting Timeser,er. If Timeser,er is not usedor not setup parameters! when PS+A ard communicates with monitoring module! it will get time from monitoring module andsetup time.

8. If the Timeser,er is setup and a,ailable! no matter whether the PS+A ard time is set! it will be ad?usted by the Timeser,erautomatically.

*. .3 ower Name ettin(

ele!t J NA 'on&i("rationK, %o" will see t#e NA 'ard relatin( settin( s!reen.

Do" !an set NA 'ard power name in t#e NA 'ard power name settin( we+pa(e < ee Fi("re *:11>. -#e name ist#at s#own in t#e main state o& t#e E +rowser to distin("is# di&&erent NA 'ard.

Figure 4-11 Power name setting webpage

*. .* $ser n&ormation ettin(ele!t s"+:men" J$ser n&oK, %o" will see "ser in&ormation settin( s!reen. Do" ma% set"p relative in&ormationparameters in t#e we+pa(e < ee Fi("re *:12>.



25/47


-#e "ser parameters are to spe!i&% "ser a!!essi+ilit% to t#e NA 'ard, to avoid i lle(al a!!ess and !ontrol overNA 'ard.

Figure 4-12 /ser information setting

1. Addin( new "sers

For newl% installed NA !ard, t#e de&a"lt "ser is onl% s%stem administrator t#at is PadminQ. -o ena+le ot#er relevantpersons to visit and !ontrol power s"ppl% t#ro"(# ?e+ +rowser, %o" s#o"ld lo(in t#e NA 'ard as t#e PadminQ, addt#eir in&ormation and (rant t#em !orrespondin( a"t#orit%.

""! NoteThe system administrator FadminF is a special user with highest authority. 7ou cannot delete it or change the name or itsauthorities. =ut you can change its password.

np"t t#e &ollowin( messa(es in t#e Fi("re *:12/

$ser name

-#e "ser name !an +e made "p o& an% !#ara!ter


26/47


besides changing admin password! add another user as system administrator! li)e FAdmF. hen you cannot login in as admin!you can also use Adm account! and then change the admin password.

3. 4eletin( ele!ted $ser

Do" !an also delete "sers t#at no lon(er need visit t#e NA 'ard. ele!t t#e "ser %o" want to delete in t#e list o&Fi("re *:12 and !li!k J4elete ele!ted $serK to delete one or m"lti:"ser.

"+! %int

There are two methods to forbid a user from ,isiting the PS+A ardE

1% -elete JserE bloc) the user away from the PS+A ard fore,erG

#% Modify AuthorityE change user authority to F+o AccessF! temporarily disable userHs access to the PS+A ard until you regranthim/her the right.

*. .5 NM A(ent n&ormation 'on&i("ration

ele!t J NM 'on&i(K, %o" will see t#e parameter !on&i("ration s!reen administrator $ser !on&i("ra+le%stem o!ation A(ent o!ation $ser !on&i("ra+le

n t#is s!reen, %o" !an spe!i&% a(ent name, M B !onta!t person, and NM A(ent lo!ation. 'li!k J "+mitK to save t#e!on&i("ration.

*. .6 NM 'on&i("ration

ele!t s"+:men" JNM 'on&i(K, %o" will see NM !on&i("ration s!reen


27/47


Figure 4-14 N0S information configuration webpage

1. Add new NM

& a NM want to visit NM a(ent, it m"st e it in NM ta+le.

NM properties in!l"de/ address, !omm"nit% strin( &or visitin( NM a(ent and -RA level &or re!eivin( $Ma(ent.

NM address

NM address means t#e NM !omp"ter address allowed visitin( NM a(ent, s"!# as/ 10.63.0.160

"+li! !omm"nit% strin(

'omm"nit% strin( &or (ettin( NM a(ent varia+les, t#e de&a"lt is =p"+li!=

rivate !omm"nit% strin(

'omm"nit% strin( &or (ettin( and settin( NM a(ent varia+les, t#e de&a"lt is =private.Q

"-! Note

ommunity String is a code for +MS to ,isit S+MP agent. Pay attention to the capital/small letters.

NM a"t#orit% &or power visitin(

Re&er to -a+le *:3 &or t#e vario"s a"t#orit% levels &or NM to visit power NM A(ent.

Table 4- N0S authorit& table

Name A"t#orit%administrator 'on&i("re NM ta+le 'ontrol ower View ower tate'ontrol 'on&i("re NM ta+le 'ontrol ower View ower tateG"er% 'on&i("re NM ta+le 'ontrol ower View ower tateNo A!!ess 'on&i("re NM ta+le 'ontrol ower View ower tate

" ! Suggestion

Benerally! we grant configuration authority to power control +MS! @uery authority to other +MS.

-RA level &or re!eivin( NM a(ent

?#en power alarm o!!"rs, NM a(ent will send -RA to NM . Do" ma% set -RA level to &ilter t#ese alarms. Onl%t#e alarm w#ose level is e "al to or (reater t#an t#e trap level will +e sent to NM . -#e -RA levels are/

1. n&ormation/ re!eive all power alarms in!l"din( in&orm messa(es.

2. ?arnin(/ re!eive important and serio"s alarm.

3. evere/ re!eive "r(ent alarm onl%.

*. No -rap/ no alarm will +e sent to NM .

" ! Suggestion

1. Benerally! the alarm le,el for recei,ing +MS Agent "T5AP% can be set as 3 Information6 that is to recei,e all alarm messages.

#. At present! all alarm le,els are set to 3Se,ere6 in MI= for the communication e@uipment of 4merson +etwor) Power o.! :td.

Jsers can reset the actual alarm le,el according to the re@uirement in +MS software.8. D +MS can be set at the most.



28/47


29/47

2* '#apter * ower Monitorin( Met#od One/ -#ro"(# ?e+ Browser

*. . NA 'ard Firmware $p(rade

Do" ma% download t#e latest version o& t#e NA 'ard &irmware to "p(rade it online.

ele!t J NA $p(radeK, %o" will see NA 'ard Firmware $p(rade we+pa(e


30/47

'#apter 5 ower Monitorin( Met#od -wo/ -#ro"(# NM 25

Chapter ) Power Monitoring Method 'wo, 'hrough NMS

$sin( t#e NM a(ent &"n!tion o& t#e NA 'ard, NM !an in "ire power state and inp"tCo"tp"t si(nals, and view

power alarm. n !ase o& alarm, t#e NA a(ent will noti&% t#e preset NM +% -RA .

5.1 NM A(ent "pported NM And roto!ol

-#e NM a(ent provided +% NA 'ard now s"pports NM proto!ol NM v1.

NM t#at s"pports NM v1 proto!ol is allowed to a!!ess t#e NM a(ent o& NA 'ard, like 9 OpenView, BMNetView, Novell Mana(e?ise, "nNet Mana(er, et!.

5.2 ower M B nstallation

1. M B installation

Network administrator !an view in&ormation stored in M B. -#e in&ormation is t#e administrated reso"r!es in t#enetwork administration.

M B &iles o& M : ACA CA10CA11 and M500F monitorin( mod"le are on t#e installation disk RpsBatter%'"rrent -otal Batter% '"rrent RpsBatter%-emperat"re Batter% Room -emperat"re Rs np"t ineBVolta(e A' np"t #ase B ine Volta(e RpsO"tp"t (ro"p ower "ppl% O"tp"t n&ormationpsO"tp"tVolta(e 4' O"tp"t Volta(e


31/47

26 '#apter 5 ower Monitorin( Met#od -wo/ -#ro"(# NM

psO"tp"t'"rrent -otal oad '"rrent Rs np"t ineBVolta(e A' np"t #ase B ine Volta(e RpsO"tp"t (ro"p ower "ppl% O"tp"t n&ormationpsO"tp"tVolta(e 4' O"tp"t Volta(e


32/47


ps tat"s @ro"p ower "ppl% tate @ro"p

ps tat"sAlarmNA 'ard Alarm tate


33/47

2 '#apter 5 ower Monitorin( Met#od -wo/ -#ro"(# NM

("! %int

hen modifying +MS! you must send all of the following +MS properties to the ard in a submitting sessionG otherwise! youwill be prompted error message.

1. IP addressE managerAddr

#. Public ommunity StringE public ommunityString

8. Pri,ate ommunity StringE pri,ate ommunityString;. *peration authorityE managerPri,ilege

&. T5AP le,elE acceptTrap:e,el


34/47


-#e &ollowin( &i("re is t#e "er%in( inter&a!e &or !"rrent alarm list o& NA 'ard in NNM so&tware o& 9 OpenView.



35/47

30 '#apter 6 ower Monitorin( Met#od -#ree/ -#ro"(# ower tar

Chapter + Power Monitoring Method 'hree, 'hrough PowerStar

ower tar is !entrali8ed mana(ement so&tware &or t#e NA 'ard. t !an mana(e man% power s"pplies. ower tar

!an real time in "ire power state and inp"tCo"tp"t si(nals, set power r"nnin( testin(, !ontrol power r"nnin( state et!.?#en power alarm o!!"rs, ower tar will noti&% ower tar 'enter +% displa%in( alarm !ontents.

ower tar 'enter mana(in( power t#ro"(# NA 'ard needs t#e &ollowin( two steps/

1. A"t#orit%

Add t#e address o& t#e !omp"ter t#at r"ns ower tar 'enter to t#e ower tar 'enter ta+le and (rant it!orrespondin( a"t#orit%. ee *. .7 ower tar 'enter 'on&i("ration.

2. Monitorin( power

As to ower tar 'enter monitorin( power s"ppl%, re&er to ower tar so&tware man"al.



36/47

Appendi 1 M:ACA CA10CA11 Alarm Event ist 31

Appendi9 1 PSM:A/A /A12/A11 Alarm ;5ent


37/47

32 Appendi 2 M:ACA CA10CA11 i(nals < E Mode>

Appendi9 PSM:A/A /A12/A11 Signals 3I; Mode4

No. i(nal -%pe ettin( ran(e1 Batter% over volta(e RC? 20V Y 60V2 Batter% "nder volta(er RC? 20V Y60V3 Batter% over !"rrent RC? 0 Y 5000A* Over temperat"re alarm point RC? 25X' Y 100X'5 A' inp"t over:volta(e alarm point RC? 50V Y 500V6 A' inp"t "nder:volta(e alarm point RC? 50V Y 500V7 A' inp"t over:!"rrent alarm point RC? 5A Y 2000A

A' inp"t over:&re "en!% alarm point RC? *598 Y 7598A' inp"t "nder:&re "en!% alarm point RC? *598 Y 7598

10 Re!ti&ier !"rrent: limit point RC? 5Z Y 110Z11 Batter% mana(ement mode RC? Man"alC A"to12 Batter% stat"s RC? F'C B'C -est13 Re!ti&er swit!# mode RC? OnC O&& 1* 4' +"s+ar volta(e R15 4' load !"rrent R16 #ase volta(e o& ea!# ro"te and ea!# A' s!reen R17 #ase !"rrent o& ea!# ro"te and ea!# A' s!reen R1 Re!ti&er !"rrent R1 Re!ti&er2 temperat"re R20 Re!ti&er2 volta(e R21 '"rrent o& ea!# ro"te and ea!# 4' s!reen R22 -emperat"re o& ea!# meas"rin( point and ea!# 4' s!reen R23 '"rrent o& ea!# +atter% and ea!# 4' s!reen R2* Volta(e o& ea!# +atter% and ea!# 4' s!reen R25 -emperat"re o& ea!# +atter% and ea!# 4' s!reen R

Note/

9istor% events and #istor% alarms are availa+le in M:A CA10CA11 monitorin( mod"les.



38/47

Appendi 3 M500F Alarm Event ist 33

Appendi9 " M)22= Alarm ;5ent


39/47

3* Appendi 3 M500F Alarm Event ist

4 En(lis# '#inese5* Finis#ed +atter% -est res"med55 4' Volta(e Fa"lt56 4' Volta(e Fa"lt res"med57 '"stomi8ed alarm (enerated5 '"stomi8ed alarm res"med5 Re!ti&ier ost alarm60 Re!ti&ier ost alarm res"med



40/47

Appendi * M500F i(nals < E Mode> 35

Appendi9 ( M)22= Signals 3I; Mode4

1. %stem s!reen

No. i(nal -%pe ettin( ran(e1 4' +"s+ar volta(e R2 4' load !"rrent R3 4' inp"t over:volta(e alarm point RC? 20V Y60V* 4' inp"t "nder:volta(e alarm point RC? 20V Y60V5 Batter% !#ar(in( over !"rrent point RC? 0A Y 5000A6 Batter% over temperat"re RC? 10X' Y 100X'7 Batter% "nder temperat"re RC? :*0X' Y 10X'

Over temperat"re alarm point RC? 10X' Y 100X'$nder temperat"re alarm point RC? :*0X' Y 10X'

10 A' inp"t over:volta(e alarm point RC? 50V Y 500V11 A' inp"t "nder:volta(e alarm point RC? 50V Y 500V12 Batter% mana(ement mode RC? Man"alC A"to13 'omm"ni!ation mode wit# monitorin( mod"le R 1* Batter% stat"s RC? F'C B'C -estC top test

15 Monitorin( #ardware sel&:!#e!k alarm state R 16 Re!ti&iers alarm state R 17 %stem maintenan!e alarm state R 1 Re!ti&ier lost alarm state R

2. A' s!reens

1> %stems wit#o"t A' inp"t

No. i(nal -%pe ettin( ran(e1 A' s!reen1, ro"te1 violta(e/ $a+C $aC $ma R2 A' s!reen1, ro"te1 violta(e/ $a+C $aC $ma R3 A' s!reen swit!#in( state R* A' s!reen ro"te No. R5 A' s!reen1, ro"te1 violta(e $a+C $aC $ma state R 6 A' s!reen1, ro"te1 violta(e $+!C $+C $min state R 7 A' s!reen1, ro"te1 power &ail"re alarm state R

A' inp"t over:&re "en!% alarm point RC? *598 Y 7598A' inp"t "nder:&re "en!% alarm point RC? *598 Y 7598

10 Re!ti&ier !"rrent: limit point RC? 5Z Y 110Z1112 Batter% stat"s RC? F'C B'C -est13 Re!ti&er swit!# mode RC? OnC O&& 1* 4' +"s+ar volta(e R15 4' load !"rrent R16 #ase volta(e o& ea!# ro"te and ea!# A' s!reen R17 #ase !"rrent o& ea!# ro"te and ea!# A' s!reen R1 Re!ti&er !"rrent R1 Re!ti&er2 temperat"re R20 Re!ti&er2 volta(e R21 '"rrent o& ea!# ro"te and ea!# 4' s!reen R22 -emperat"re o& ea!# meas"rin( point and ea!# 4 ' s!reen R23 '"rrent o& ea!# +atter% and ea!# 4' s!reen R2* Volta(e o& ea!# +atter% and ea!# 4' s!reen R25 -emperat"re o& ea!# +atter% and ea!# 4' s!reen R

2> %stems wit# A' inp"t

No. i(nal -%pe ettin( ran(e1 A' s!reen1, ro"te1 violta(e $a+C $aC $ma R2 A' s!reen1, ro"te1 violta(e $a+C $aC $ma R3 A' s!reen1, ro"te1 violta(e $!aC $a R

* A' s!reen1, ro"te2 violta(e $a+C $a R5 A' s!reen1, ro"te2 violta(e $+!C $+ R6 A' s!reen1, ro"te2 violta(e $!aC $! R7 A' s!reen swit!#in( state R



41/47

36 Appendi * M500F i(nals < E Mode>

A' s!reen ro"te No. RA' s!reen ro"te1 violta(e $a+C $aC $ma state R

10 A' s!reen ro"te1 violta(e $+!C $+C $min state R 11 A' s!reen ro"te1 violta(e $!aC $! state R 12 A' s!reen ro"te1 violta(e M'B state R 13 A' s!reen ro"te1 violta(e 4 state R 1* A' s!reen ro"te1 power &ail"re alarm state R 15 A' s!reen ro"te2 violta(e $a+C $aC $ma state R 16 A' s!reen ro"te2 violta(e $+!C $+C $min state R 17 A' s!reen ro"te1 violta(e $!aC $! state R

3. 4' s!reen

No. i(nal -%pe ettin( ran(e1 4' s!reen1 4' violta(e R2 4' s!reen1 load !"rrent R3 4' s!reen1 +atter%1 !"rrent R* 4' s!reen1 +atter%2 !"rrent R5 4' s!reen1 +atter% strin(1 volta(e R6 4' s!reen1 +atter% strin(2 volta(e R7 4' s!reen1 +atter% strin(1 a!t"al !apa!it% R

4' s!reen1 +atter% strin(2 a!t"al !apa!it% R4' s!reen1 +atter%1 temperat"re R

10 4' s!reen1 volta(e state R 11 4' s!reen1 ro"te1 state R 12 4' s!reen1 ro"te2 state R 13 4' s!reen1 ro"te3 state R 1* 4' s!reen1 ro"te* state R 15 4' s!reen1 ro"te5 state R 16 4' s!reen1 ro"te6 state R 17 4' s!reen1 ro"te7 state R 1 4' s!reen1 ro"te state R 1 4' s!reen1 ro"te state R 20 4' s!reen1 ro"te10


42/47


43/47

3 Appendi 5 erial ort ositions

Appendi9 ) Serial Port Positions

-#ere is a reserved serial port &or t#e NA network !ard in ever% Emerson power s"ppl% s%stem. -#e serial port

lo!ates at t#e monitorin( mod"le or t#e si(nal trans&er +oard . -#e serial port positions will +e introd"!ed in t#e&ollowin( !ontents.

1! PSM:A monitoring module

-#e model o& power s"ppl% s%stem wit# M:A monitorin( mod"le is * 1000:2C100. -#e serial port &or NA !ardlo!ates at t#e +a!k +oard o& t#e M:A monitorin( mod"le, as s#own in Fi("re1.

#oneower

swit!#

F"se

Alarm Rela% O"tp"tO C 1 O C2 O C 3 OC*

OC5 OC 6 OC 7

'OM3 MO4EM 'OM2 R 232 'OM1 R * 5C*22

MO4EM 'OM5 'OM*

'OM7 'OM6

: : U U

erial port &or NA !ard

Figure 1 Serial port at PS0-A monitoring module

! PSM:A12 monitoring module

-#e models o& power s"ppl% s%stem wit# M:A10 monitorin( mod"le are * 600:24C50, * 100:2BC25,* 300:1BC30 and so on. -#e serial port &or NA !ard lo!ates at t#e ?2**2[1 si(nal trans&er +oard, as s#own in

Fi("re2.

?2**2[1


Figure 2 Serial port at 5244261 signal transfer board

"! PSM:A /A11 monitoring module

-#e models o& power s"ppl% s%stem wit# M: A CA11 monitorin( mod"le are * 600:24C50, * 100:2BC25,* 300:1BC30 and so on. -#e serial port &or NA !ard lo!ates at t#e +a!k +oard o& t#e M: A CA11 monitorin(

mod"le, as s#own in Fi("re3.1erial port &or 1NA !ard

Figure Serial port at PS0- A+3A11 monitoring module



44/47

Appendi 5 erial ort ositions 3

(! M)22= monitoring module

-#e models o& power s"ppl% s%stem wit# M500F monitorin( mod"le are * 600:3AC2 00, * 300:3C2 00 and soon. -#e serial port &or NA !ard lo!ates at t#e ?7*'5[1 si(nal trans&er +oard, as s#own in Fi("re*.

?7*'5[1


Figure 4 Serial port at 5'4!#61 signal transfer board



45/47

*0 Appendi 6 -ro"+les#ootin(

Appendi9 + 'roubleshooting

6.1 nstallation G A1. ndi!ator does not li(#t a&ter NA 'ard installation.

Answer/ -#e power !a+le is not !onne!ted !orre!tl% or t#e monitorin( mod"le is s#"tdown.

2. No NA 'ard start"p in&ormation on 9%per -erminal s!reen d"rin( t#e installation.

Answer/ Do" #ave to start 9%per -erminal and !onne!t testin( port o& NA 'ard wit# R 232 !a+le o& t#e !omp"ter+e&ore t#e start o& NA 'ard, +e!a"se it takes onl% 5 se!onds to start t#e NA 'ard, %o" !annot see t#e startpro!ess i& %o" start 9%per -erminal a&ter %o" insert NA 'ard. & %o" do #ave start 9%per -erminal +e&ore startin(t#e NA 'ard, +"t %o" !annot see t#e pro!ess, re&er to "estion 2 in %72 $unning 8.A .

3. 'an &inis# t#e NA 'ard installation wit#o"t !omp"ter at #and to r"n 9%per -erminal

Answer/ No, i& %o" donSt know t#e address. & it is a new !ard Restart t#e !omp"ter, visit t#e NA 'ard in -elnet mode, lo(in as admin and its password Res"me t#e network parameter o& t#e !omp"ter.

6.2 R"nnin( G A

1. NA 'ard @reen li(#t +link +"t %ellow li(#t t"rns o&&

Answer/ -#e 'ard #as not !onne!ted to t#e network, please !onne!t it to t#e network. A&ter +"ildin( "p network!onne!tion, w#en t#e 'ard re!eivin( data &rom t#e network, t#e %ellow li(#t will +link, i& no data transmittin(, t#e%ellow li(#t will keep t"rnin( on.

2. -#e NA 'ard is r"nnin(, +"t w#en startin( 9%per -erminal to prepare settin( NA 'ard parameters, no lo(inin&ormation on t#e s!reen

Answer/ ress EN-ER ke%, i& still no lo(in in&ormation, please veri&% t#at t#e 'ard is r"nnin( ?#et#er 9%per -erminal and serial port are in !omm"ni!ation state.

3. ?#at s#all do i& lose admin password

Answer/ & %o" #ave set anot#er we+ "ser wit# administrator a"t#orit%, %o" ma% lo(in t#e NA 'ard "sin( t#isa!!o"nt t#ro"(# ?e+ +rowser and t#en !#an(e admin password. Ot#erwise, %o" #ave to !onta!t %o"r s"pplier.

*. ?#% !an some !omp"ters visit t#e 'ard +"t some !annot, +"t t#ese !omp"ters !an visit ea!# ot#er

Answer/ n!orre!t NA 'ard (atewa% settin(. & t#e de&a"lt (atewa% is 0.0.0.0, t#e NA 'ard !an +e visited onl%+% t#e !omp"ters in t#e same network se(ment. lease reset t#e (atewa% a!!ordin( to %o"r !omp"ter.



46/47


47/47

*2 Appendi 6 -ro"+les#ootin(

1> -#is NM is la!k o& power !ontrol a"t#orit%.

2> A(ent sendin( power !ontrol !ommand &ail"re. -#e a(ent does not send NM re "est to t#e power s"!!ess&"ll%.lease !#e!k w#et#er t#e parameters sent +% t#e NM are !orre!t, and w#et#er power !omm"ni!ation &ail"re alarm is re!eived.

3. "st !annot add a new NM to t#e NM ta+le +% NM .

Answer/ Onl% s%stem administrator !an addCdeleteCmodi&% NM . Besides, %o" m"st s"+mit all writa+le properties o&t#e NM ta+le w#en %o" do t#e a+ove operation.

6.5 ower tar Monitorin( G A

1. 9ow !an ower tar mana(e power t#ro"(# t#e NA 'ard

Answer/ Addin( t#e !omp"ter address t#at r"ns ower tar to t#e NA 'ard t#ro"(# = ower tar 'enter!on&i("ration= s!reen on ?e+ +rowser and set t#e !orrespondin( a"t#orit%

2> -#ro"(# ower tar !on&i("ration tools, add t#e NA 'ard address to t#e !on&i("ration &iles o& ower tarso&tware

3> Restart ower tar, t#en %o" !an mana(e power t#ro"(# it.

2. ?#% ower tar t#at r"nnin( proper +e&ore !an not monitorin( t#e power t#ro"(# NA 'ard/

Answer/ 1> $p(rade ower tar to Ver 6.52 and set"p port parameters !orre!tl% a!!ordin( to t#eman"al

Documents

PSNA WebSNMP Agent Network Card.doc