Upload
vuongthien
View
271
Download
14
Embed Size (px)
Citation preview
PS/PSK PORTAL Part 2
Contents of this booklet:
Section 5.1 PSK PORTAL 200-Z PLUS
for timber and PVCu elements
Section 5.2 PS PORTAL for timber and PVCu elements
Section 5.3 PS/PSK PORTAL 200-Z PLUS
Accessories
Section 5.4 PS/PSK PORTAL 200-Z PLUS
Frame part list
Please observe!
• Guidelines/information on the product and on liability (VHBH directive as well as the further applicable documents).
• Specifications from the profile manufacturers or system owners (PVC, light metal) or DIN 68121 – Timber profiles for windows and window doors.
5.1.1
Contents Section 5.1PSK PORTAL 200-Z PLUS
PSK PORTAL 200-Z PLUS page
Parallel tilt & slide hardware with handle control
Scheme overview and general information 5.1.2Size ranges 5.1.3
PSK PORTAL 200-Z PLUS Timber and PVC elements with 12 mm airgap or cavity
Fitting diagram schemes A, G and K - basic security and WK 1 5.1.4Overview of sets schemes A, G and K - basic security and WK 1 5.1.5Fitting diagram?scheme C, variant 1 - basic security 5.1.6Overview of sets?scheme C, variant 1 - basic security 5.1.7Fitting diagram?scheme C, variant 2 - basic security and WK 1 5.1.8Overview of sets?scheme C, variant 2a - basic security and WK 1 5.1.9Fitting diagram scheme C, variant 2b - basic security 5.1.10Overview of sets scheme C, variant 2b - basic security 5.1.11Overview of sets?schemes A, G and K - WK 2 5.1.12Overview of sets?schemes A, G and K - WK 2 5.1.13Fitting diagram scheme C, variant 2a - WK 2 5.1.14Overview of sets scheme C, variant 2a - WK 2 5.1.15
PSK PORTAL 200-Z PLUS Timber elements with 4 mm airgap
Fitting diagram schemes A, G and K - basic security and WK 1 5.1.16Overview of sets schemes A, G and K - basic security and WK 1 5.1.17Fitting diagram?scheme C, variant 1 - basic security 5.1.18Overview of sets?scheme C, variant 1 - basic security 5.1.19Fitting diagram?scheme C, variant 2 - basic security and WK 1 5.1.20Overview of sets?scheme C, variant 2a - basic security and WK 1 5.1.21Fitting diagram scheme C, variant 2b - basic security 5.1.22Overview of sets scheme C, variant 2b - basic security 5.1.23Fitting diagram scheme A - WK 2 5.1.24Overview of sets scheme A - WK2 5.1.25Fitting diagram scheme C, variant 2a - WK 2 5.1.26Overview of sets scheme C, variant 2a - WK 2 5.1.27
2011-08
5.1.2
200 kg 200 kg
Scheme overview
1) It is also possible to use turning sashes or turn-tilt sashes instead of fixed sashes. Turning sashes or turn-tilt sashes only with rose Si-line inside and removable handle.
Note:
You can find profile-related information in the separate frame part list for PSK PORTAL 200-Z PLUS on page 5.4.1
The size ranges given for the PSK PORTAL 200-Z PLUS fitting from SIEGENIA-AUBI must not be
exceeded.
• For timber elements the standards specified by DIN 68 121 (Timber profiles for windows and window doors) applyProfile cross section IV 68, timber quality and design.
The following is the minimum sash profile cross section:– IV 68/78 for sash rebate dimensions of max. 1500 x 1500 mm – IV 68/92 for larger sash rebate dimensions.
The bottom cross-piece must be installed with an additional connection profile.
• For PVC elements the specifications of the profile manufacturers or system owners also apply, especially with regard to possible restrictions on sash dimensions and/or sash weight.
�������
Scheme A
LH version or RH version
Scheme G
1 sliding sash/2 fixed glazing1)
1 sliding sash/1 fixed glazing1)
2 sliding sashes/2 fixed glazing1)
2 sliding sashes/1 fixed glazing
Scheme C
Scheme K
Scheme C
Various variants possible, see fitting diagrams
Page 5.1.6 to 5.1.11 and page 5.1.14 to 5.1.15 as well as page 5.1.18 to 5.1.23, page 5.1.26. and 5.1.27
2011-08
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle controlScheme overview and general information
5.1.3
200 kg 200 kg
Size ranges
The following size ranges must not be exceeded.Sash rebate width (SRW) (mm) 770 to 20001)
Sash rebate height (SRH) scheme A, G, K, C1 (mm) 1000 to 2360Sash rebate height (SRH) scheme C2a, C2b (mm) 1460 to 2360Exterior width of the frame (EWF) (mm)Depends on pro-file system; determined by the SRWSash weight (kg) max. 200Backset gear lockable with profile cylinder (mm) 30, 40, 45 and 50Handle height constant (mm) 490 - 9902)
Groove axis (mm) 9 and 13Total frame to sash clearance (mm) 125
1) For sash rebate widths < 944 mm, the sash rebate height must not be greater than 2.5x the sash rebate width.2) For gear OS (without lock) size 169 - size 238, the handle height can be reduced by 100 mm, SRH is reduced as well
(possible to compensate using linkage size 23).
����
����
��
Vertical sections
����
������
Adjustment options
Height adjustment of the bogie wheels (mm) + 4/ - 2SW 8
Sash pressure adjustment (mm) ± 1SW 4/SW11
2011-08
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle controlSize ranges
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle controlFitting diagram schemes A, G and K - basic security and WK 1
5.1.4
12/18 - 9
1
25 19
20
14 15
33a 39
24
33a
39
32
7
6
33a
34a/35a
11
23
32
33a
39
14
2236
31
9
8
10
2
37 37
36
33a
3139
■ in carton handle Si-line PSK 200-Z/GH
■ in carton corner drive PSK 200-Z
■ in carton bogie wheels PSK 160/200-Z PLUS
■ in profile set PSK PLUS
■ in bag frame parts PSK 200-Z34a/35a
33a
33a
33a
33a
38 38
34a
34a
1a 2
WK 1
WK 1 WK 1
Size range
SRW (mm) 770 to 20001)
1) For sash rebate widths < 944 mm, the sash rebate heightmust not be greater than 2.5x the sash rebate width.
SRH (mm) 1000 to 2360
EWF (mm) depends on profile system; de-termined by the SRH
Sash weight (kg) max. 200
5.3.4
17
2011-08
12
29
21
16
30
18
13
28 27 261816
18
18
33a
5.1.5 5.1.5
12/18 - 9 12/18 - 9Surface TS Surface TS
Fitting diagram
PSK PORTAL 200-ZPLUS scheme C variant 1
see inside
Item Description
Material number Quantity for scheme
Base no. ... ... Colour no.A G K
Silver RAL 9003 white
RAL 8022 brown middle bronze
Basic requirements for basic security and WK1
1-2
Handle PSK200/GHRight Standard – 296257 296271 297797 296295
1 1
1For WK1 Lockable (incl. 1 key 2W145) – 296356 296370 298510 296394
Left Standard – 296301 296325 297803 2963491
For WK1 Lockable (incl. 1 key 2W145) – 296400 296424 298527 296448
6-11
Corner drive PSK 200-Z Right 9 mm groove axis S-ES 2/0 2/4 – PMEL0041-100010
1 1
19 mm groove axis S-RS 2/0 – 2/4 PMEL0021-100010
13 mm groove axis S-ES 2/0 2/4 – PMEL0031-100010
13 mm groove axis S-RS 2/0 – 2/4 PMEL0011-100010
Left 9 mm groove axis S-ES 2/0 2/4 – PMEL0042-100010
19 mm groove axis S-RS 2/0 – 2/4 PMEL0022-100010
13 mm groove axis S-ES 2/0 2/4 – PMEL0032-100010
13 mm groove axis S-RS 2/0 – 2/4 PMEL0012-100010
12-15Carton bogie wheels PSK PLUSRight PMKJ0031-100010
1 11
Left PMKJ0032-100010 1
Required for sash weight > 160 kg for basic security and WK1 16 Bogie wheels M PSK PLUS Right PLWL0031-100010
21)
1) Required for sash weight > 160 kg, at least one sash width of > 935 mm is required.
21) 21)
Left PLWL0032-100010 21)
Requirement acc. to SRW and EWF for basic security and WK1
17-30 Profile set PSK PLUS
Size2)
87/200107/240130/286160/346200/426
2) To precisely determine the required size, you must calculate the dimensions of SRW and EWF.
SRW (mm)770 to 870871 to 1070
1071 to 13001301 to 16001601 to 2000
EWF (mm)to 2000
2001 to 24002401 to 28602861 to 34603461 to 4260
PMPJ0100-...PMPJ0110-...PMPJ0120-...PMPJ0130-...PMPJ0140-...
...525010
...525010
...525010
...525010
...525010
...502010
...502010
...502010
...502010
...502010
...512011
...512011
...512011
...512011
...512011
...531011
...531011
...531011
...531011
...531011
1 1 23)
3) Symmetrical design; point of separation must be in the centre between the sliding sashes.
Requirement acc. to SRW for basic security and WK1
31
Linkage(with standard locking cams)
Size100123 146 169 169/2192215
SRW (mm)770 to 850851 to 1000
1001 to 12301231 to 14601461 to 16901461 to 16901691 to 19201921 to 2000
loose drive rod and face plate4)
4) Use loose drive rod and face plate from the remnants of the current production.
–1122122
–713914713921713938713945
PZKL0240-100010713952713969
2 2 4
Linkage S-ES(with mushroom head cams)
Size100123146169192215
SRW (mm)770 to 850851 to 1000
1001 to 12301231 to 14601461 to 16901691 to 19201921 to 2000
loose drive rod and face plate4) –
112222
–713839713846713853713860713877713884
Linkage S-RS(with comfort mushroom head cams)
Size100123146169192215
SRW (mm)770 to 850851 to 1000
1001 to 12301231 to 14601461 to 16901691 to 19201921 to 2000
loose drive rod and face plate4) –
112222
–PZKL0270-100010PZKL0280-100010PZKL0290-100010PZKL0300-100010PZKL0320-100010PZKL0330-100010
Requirement acc. to SRH for basic security and WK1
32
Gear OS(with standard locking cams)
Size123146169192215238
SRH (mm)1000 to 12301231 to 14601461 to 16901690 to 19201921 to 21502151 to 2360
Handle position490590690990990990
–11222
713303713297713341713815713358713334
2 2 4Gear OS S-ES(with mushroom head cams)
Size123146169192215238
SRH (mm)1000 to 12301231 to 14601461 to 16901690 to 19201921 to 21502151 to 2360
Handle position490590690990990990
–11222
713303713761713778713785713792713808
Note: Coupling bracket 18/3 for rebate heights 23 - 34 mm see page 5.3.7
Item Description
Material number Quantity for scheme
Base no. ... ... Colour no.A G K
Silver RAL 9003 white
RAL 8022 brown middle bronze
Requirement acc. to SRH for basic security and WK1
32
Gear OS S-RS(with comfort mushroom head cams)
Size123146169192215238
SRH (mm)1000 to 12301231 to 14601461 to 16901690 to 19201921 to 21502151 to 2360
Handle position490590690990990990
–11222
713303PGKL0130-100030PGKL0140-100010PGKL0150-100010PGKL0160-100010PGKL0170-100010
2 2 4
Requirement acc. to profile system for basic security 33a
Striker plate 56 (for standard locking cams)
A... Timber see frame part list page 5.4.14..10 4..10 8..20
33 A... PVC see frame part list page 5.4.1
34a Striker plate S-ES PSK 200-Z(for mushroom head cams)
A... Timber see frame part list page 5.4.1
2 2 434 Striker plate S-ES A... PVC see frame part list page 5.4.1
35a Striker plate SL-RS(for comfort mushroom head cams)
A... Timber see frame part list page 5.4.1
35 Striker plate SL-RS A... PVC see frame part list page 5.4.1
36-37Bag frame parts PSK 200-Z A... Timber see frame part list page 5.4.1
1 1 2A... PVC see frame part list page 5.4.1
Requirement acc. to profile system for WK133a Striker plate 56
(for standard locking cams)
A... Timber see frame part list page 5.4.12..8 2..8 4..16
33 A... PVC see frame part list page 5.4.1
34a Striker plate S-ES PSK 200-Z(for mushroom head cams)
A... Timber see frame part list page 5.4.1
4 4 834 Striker plate S-ES A... PVC see frame part list page 5.4.1
35a Striker plate SL-RS(for comfort mushroom head cams)
A... Timber see frame part list page 5.4.1
35 Striker plate SL-RS A... PVC see frame part list page 5.4.1
36-37Bag frame parts PSK 200-Z A... Timber see frame part list page 5.4.1
1 1 2A... PVC see frame part list page 5.4.1
Accessories on request38 Cover cap S PKAL0010-... ...025010 ...002010 ...012010 ...030010 2 2 4
39 Location piece 702543 0..4 0..4 0..4
2011-08
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle controlOverview of sets schemes A, G and K - basic security and WK 1
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle controlOverview of sets schemes A, G and K - basic security and WK 1
5.1.6
12/18-9
5.1.6
2011-08
33a
33a
34a
33a
����
����
2 sliding sashes/2 fixed glazing
Scheme C
1
19 14 15
33a 39
24
39
32
7
6
11
23
32
33a
39
14
2233a
36
31
9
8
10
2
37 37
363139
■ in carton handle Si-line PSK 200-Z/GH
■ in carton corner drive PSK 200-Z
■ in carton bogie wheels PSK 160/200-Z PLUS
■ in profile set PSK PLUS
■ in bag frame parts PSK 200-Z 34a/35a
33a
33a
33a38 38
Size range
SRW (mm) 770 to 20001)
1) For sash rebate widths < 944 mm, the sash rebate height must not be greater than 2.5x the sash rebate width.
SRH (mm) 1000 to 2360
EWF (mm) depends on profile system; de-termined by the SRH
Sash weight (kg) max. 200
17
12
29
21
16
30
18
13
28 27 261816
18
18
20
1
191415
33a39
24
39
32
7
6
11
23
32
33a
39
14
22 34a
31
9
8a
10a
2
37
36 31 39
34a/35a
33a
33a
33a 3838
17
12
29
21
16
30
18
13
28272618 16
18
18
20
33a
Main sash Secondary sash
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle control Fitting diagram?scheme C, variant 1 - basic security
33a33a33a
Surface TSSurface TS
5.1.7 5.1.7
12/18 - 9 12/18 - 9
Fitting diagram
PSK PORTAL 200-ZPLUS scheme C variant 2a
see inside
Item Description
Material number Pc.
Base no.... ... Colour no.
Silver RAL 9003 white RAL 8022 brown Middle bronze Scheme C
Variant 1
Basic requirements
1-2
Handle PSK200/GHRight Standard – 296257 296271 297797 296295
2Lockable (incl. 1 key 2W145) – 296356 296370 298510 296394
Left Standard – 296301 296325 297803 296349
Lockable (incl. 1 key 2W145) – 296400 296424 298527 296448
6-11
Corner drive PSK 200-Z Right 9 mm groove axis S-ES 2 2 – PMEL0041-100010
1
9 mm groove axis S-RS 2 – 2 PMEL0021-10001013 mm groove axis S-ES 2 2 – PMEL0031-10001013 mm groove axis S-RS 2 – 2 PMEL0011-100010
Left 9 mm groove axis S-ES 2 2 – PMEL0042-1000109 mm groove axis S-RS 2 – 2 PMEL0022-100010
13 mm groove axis S-ES 2 2 – PMEL0032-10001013 mm groove axis S-RS 2 – 2 PMEL0012-100010
6-11
Corner drive PSK 200-Z Right 9 mm groove axis S-ES 2 2 – PMEL0081-100010
1
Scheme C1)
1) Contents corner drive PSK 200-Z scheme C:like corner drive PSK 200-Z but with corner drive VSO S-ES scheme C and VSU S-ES scheme C.
9 mm groove axis S-RS 2 – 2 PMEL0061-10001013 mm groove axis S-ES 2 2 – PMEL0071-10001013 mm groove axis S-RS 2 – 2 PMEL0051-100010
Left 9 mm groove axis S-ES 2 2 – PMEL0082-1000109 mm groove axis S-RS 2 – 2 PMEL0062-100010
13 mm groove axis S-ES 2 2 – PMEL0072-10001013 mm groove axis S-RS 2 – 2 PMEL0052-100010
12-15Carton bogie wheels PSK PLUS Right PMKJ0031-100010 1
Left PMKJ0032-100010 1
Required for sash weight > 160 kg 16 Bogie wheels M PSK PLUS Right PLWL0031-100010 42)
2) Required for sash weight > 160 kg, at least one sash width of > 935 mm is required.
Left PLWL0032-100010 42)
Requirement acc. to SRW and EWF
17-30 Profile set PSK PLUS
Size3)
87/200107/240130/286160/346200/426
3) To precisely determine the required size, you must calculate the dimensions of SRW and EWF.
SRW (mm)770 to 870871 to 1070
1071 to 13001301 to 16001601 to 2000
EWF (mm)to 2000
2001 to 24002401 to 28602861 to 34603461 to 4260
PMPJ0100-...PMPJ0110-...PMPJ0120-...PMPJ0130-...PMPJ0140-...
...525010
...525010
...525010
...525010
...525010
...502010
...502010
...502010
...502010
...502010
...512011
...512011
...512011
...512011
...512011
...531011
...531011
...531011
...531011
...531011
24)
4) Symmetrical design; point of separation must be in the centre between the sliding sashes.
Requirement acc. to SRW
31
Linkage(with standard locking cams)
Size100123 146 169 169/2192215
SRW (mm)770 to 850851 to 1000
1001 to 12301231 to 14601461 to 16901461 to 16901691 to 19201921 to 2000
loose drive rod and face plate5)
5) Use loose drive rod and face plate from the remnants of the current production.
–1122122
–713914713921713938713945
PZKL0240-100010713952713969
4
Linkage S-ES(with mushroom head cams)
Size100123146169192215
SRW (mm)770 to 850851 to 1000
1001 to 12301231 to 14601461 to 16901691 to 19201921 to 2000
loose drive rod and face plate4) –
112222
–713839713846713853713860713877713884
Linkage S-RS(with comfort mushroom head cams)
Size100123146169192215
SRW (mm)770 to 850851 to 1000
1001 to 12301231 to 14601461 to 16901691 to 19201921 to 2000
loose drive rod and face plate4) –
112222
–PZKL0270-100010PZKL0280-100010PZKL0290-100010PZKL0300-100010PZKL0320-100010PZKL0330-100010
Note: Coupling bracket 18/3 for rebate heights 23 - 30 mm see page 5.3.7
Item Description
Material number Pc.
Base no.... ... Colour no.
Silver RAL 9003 white
RAL 8022 brown middle bronze Scheme C
Variant 1
Requirement acc. to SRH
32
Gear OS(with standard locking cams)
Size123146169192215238
SRH (mm)1000 to 12301231 to 14601461 to 16901690to19201921to21502151to2360
Handle position490590690990990990
–11222
713303713297713341713815713358713334
4
Gear OS S-ES(with mushroom head cams)
Size123146169192215238
SRH (mm)1000 to 12301231 to 14601461 to 16901690to19201921to21502151to2360
Handle position490590690990990990
–11222
713303713761713778713785713792713808
Gear OS S-RS(with comfort mushroom head cams)
Size123146169192215238
SRH (mm)1000 to 12301231 to 14601461 to 16901690 to 19201921 to 21502151 to 2360
Handle position490590690990990990
–11222
713303PGKL0130-100030PGKL0140-100010PGKL0150-100010PGKL0160-100010PGKL0170-100010
Requirement acc. to profile system33a Striker plate 56
(for standard locking cams)
A... Timber see frame part list page 5.4.114...18
33 A... PVC see frame part list page 5.4.1
34a Striker plate S-ES PSK 200-Z(for mushroom head cams)
A... Timber see frame part list page 5.4.1
434 Striker plate S-ES A... PVC see frame part list page 5.4.1
35a Striker plate SL-RS(for comfort mushroom head cams)
A... Timber see frame part list page 5.4.1
35 Striker plate SL-RS A... PVC see frame part list page 5.4.1
36-37Bag frame parts PSK 200-Z A... Timber see frame part list page 5.4.1
2A... PVC see frame part list page 5.4.1
Accessories on request38 Cover cap S PKAL0010-... ...025010 ...002010 ...012010 ...030010 4
39 Location piece 702543 0..8
2011-08
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle controlOverview of sets?scheme C, variant 1 - basic security
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle controlOverview of sets?scheme C, variant 1 - basic security
5.1.8
12/18-9
5.1.8
2011-08
2 sliding sashes/2 fixed glazing
Scheme C
1
19 14 15
33a 39
24
39
7
6
11
23
32
33a
39
14
2236
31
9
8
10
2
37 37
363139
■ in carton handle Si-line PSK 200-Z/GH
■ in carton corner drive PSK 200-Z
■ in carton bogie wheels PSK 160/200-Z PLUS
■ in profile set PSK PLUS
■ in bag frame parts PSK 200-Z 34a/35a
33a
33a
33a
33a
38 38
34a
1a 2
WK 1
WK 1
5.3.8
17
12
29
21
16
30
18
13
28 27 261816
18
18
20
191415
33a39
24
11
23
32
33a
39
14
22 34a
31
9
8a
10a
37
36 31 39
34a/35a
33a
33a
33a 3838
34a
WK 1
17
12
29
21
16
30
18
13
28272618 16
18
18
20
53
�� ��
�� ��
31a
34b
Main sash Secondary sash
Size range
Sash rebate width (mm) 770 to 20001)
1) For sash rebate widths that are < 944 mm, the sash rebate height must not exceed 2.5x the sash rebate width.
Sash rebate height for scheme C (mm) 1460 to 2360
Exterior width of frame (mm)depends on profile system;
determined by the sash rebate width
Sash weight (kg) max. 200Handle height, constant (mm) 990
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle controlFitting diagram scheme C, variant 2a - basic security and WK 1
33a33a 33a
Surface TSSurface TS
5.1.9 5.1.9
12/18 - 9 12/18 - 9
Item Description
Material number Pc.Base no.... ... Colour no.
Silver RAL 9003 white RAL 8022 brown middle bronze Scheme C
Variant 2a
Basic requirements for basic security and WK1
1-2Handle PSK200/GH
Right Standard – 296257 296271 297797 296295
1For WK1 Lockable (incl. 1 key 2W145) – 296356 296370 298510 296394
Left Standard – 296301 296325 297803 296349 For WK1 Lockable (incl. 1 key 2W145) – 296400 296424 298527 296448
53 Operating lever PHZL0010-100010 1
6-11
Corner drive PSK 200-Z Right 9 mm groove axis S-ES 2/0 2/4 – PMEL0041-100010
1
9 mm groove axis S-RS 2/0 – 2/4 PMEL0021-10001013 mm groove axis S-ES 2/0 2/4 – PMEL0031-10001013 mm groove axis S-RS 2/0 – 2/4 PMEL0011-100010
Left 9 mm groove axis S-ES 2/0 2/4 – PMEL0042-1000109 mm groove axis S-RS 2/0 – 2/4 PMEL0022-10001013 mm groove axis S-ES 2/0 2/4 – PMEL0032-10001013 mm groove axis S-RS 2/0 – 2/4 PMEL0012-100010
6-11
Corner drive PSK 200-Z Right 9 mm groove axis S-ES 2/0 2/4 – PMEL0081-100010
1
Scheme C1)
1) Contains corner drive PSK 200-Z scheme C:like corner drive PSK 200-Z but with corner drive VSO S-ES scheme C and VSU S-ES scheme C.
9 mm groove axis S-RS 2/0 – 2/4 PMEL0061-10001013 mm groove axis S-ES 2/0 2/4 – PMEL0071-10001013 mm groove axis S-RS 2/0 – 2/4 PMEL0051-100010
Left 9 mm groove axis S-ES 2/0 2/4 – PMEL0082-1000109 mm groove axis S-RS 2/0 – 2/4 PMEL0062-10001013 mm groove axis S-ES 2/0 2/4 – PMEL0072-10001013 mm groove axis S-RS 2/0 – 2/4 PMEL0052-100010
12-15Carton bogie wheels PSK PLUS Right PMKJ0031-100010 1
Left PMKJ0032-100010 1
Required for sash weight > 160 kg for basic security and WK116 Bogie wheels M PSK PLUS Right PLWL0031-100010 42)
2) Required for sash weight > 160 kg, at least one sash width of > 935 mm is required.
Left PLWL0032-100010 42)
Requirement acc. to SRW and EWF for basic security and WK1
17-30 Profile set PSK PLUS
Size 3)
87/200107/240130/286160/346200/426
3) To precisely determine the required size, you must calculate the dimensions of SRW and EWF.
SRW (mm)770 to 870871 to 1070
1071 to 13001301 to 16001601 to 2000
EWF (mm)to 2000
2001 to 24002401 to 28602861 to 34603461 to 4260
PMPJ0100-...PMPJ0110-...PMPJ0120-...PMPJ0130-...PMPJ0140-...
...525010
...525010
...525010
...525010
...525010
...502010
...502010
...502010
...502010
...502010
...512011
...512011
...512011
...512011
...512011
...531011
...531011
...531011
...531011
...531011
24))
4) Symmetrical design; point of separation must be in the centre between the sliding sashes.
Requirement acc. to SRW for basic security and WK1
31
Linkage(with standard locking cams)
Size100123 146 169 169/2192215
SRW (mm)770 to 850851 to 1000
1001 to 12301231 to 14601461 to 16901461 to 16901691 to 19201921 to 2000
loose drive rod and face plate5)
–1122122
–713914713921713938713945
PZKL0240-100010713952713969
4
Linkage S-ES(with mushroom head cams)
Size100123146169192215
SRW (mm)770 to 850851 to 1000
1001 to 12301231 to 14601461 to 16901691 to 19201921 to 2000
loose drive rod and face plate4) –
112222
–713839713846713853713860713877713884
Linkage S-RS(with comfort mushroom head cams)
Size100123146169192215
SRW (mm)770 to 850851 to 1000
1001 to 12301231 to 14601461 to 16901691 to 19201921 to 2000
loose drive rod and face plate4) –
112222
–PZKL0270-100010PZKL0280-100010PZKL0290-100010PZKL0300-100010PZKL0320-100010PZKL0330-100010
Requirement acc. to SRH for basic security and WK1
32
Gear OS (with standard locking-cams)
Size169192 215 238
SRH (mm)1460 to 16901690 to 19201921 to 21502151 to 2360
Handle position690990990990
1222
713341713815713358713334
3Gear OS S-ES(with mushroom head cams)
Size169192215238
SRH (mm)1460 to 16901690 to 19201921 to 21502151 to 2360
Handle position690990990990
1222
713778713785713792713808
5) Use loose drive rod and face plate from the remnants of the current production.
Note: Coupling bracket 18/3 for rebate heights 23 - 30 mm see page 5.3.7
Item Description
Material number Pc.Base no.... ... Colour no.
Silver RAL 9003 white RAL 8022 brown middle bronze Scheme C
Variant 2a
Requirement acc. to SRH for basic security and WK1
32
Gear OS S-RS(with comfort mushroom head cams)
Size169192215238
SRH (mm)1461 to 16901690 to 19201921 to 21502151 to 2360
Handle position690990990990
1222
PGKL0140-100010PGKL0150-100010PGKL0160-100010PGKL0170-100010
3
Requirement acc. to SRH for basic security and WK1
31a
Linkagescheme C(with pre-installedstriker plates)
Size169/2192 215 238
SRH (mm)1460 to 16901690 to 19201921 to 21502151 to 2360
PZKL0250-100010716366716373716380
1
Linkagescheme C(with pre-installedS-ES striker plates)
Size192 215 238
SRH (mm)1690 to 19201921 to 21502151 to 2360
PZKL0010-100010PZKL0020-100010PZKL0030-100010
Linkagescheme C(with pre-installedS-RS striker plates)
Size169/2192 215 238
SRH (mm)1460 to 16901690 to 19201921 to 21502151 to 2360
PZKL0350-100010PZKL0360-100010PZKL0370-100010PZKL0380-100010
Requirement acc. to profile system for basic security33a Striker plate 56
(for standard locking cams)
A... Timber see frame part list page 5.4.111...15
33 A... PVC see frame part list page 5.4.1
34a Striker plate S-ES PSK 200-Z(for mushroom head cams)
A... Timber see frame part list page 5.4.1
334 Striker plate S-ES A... PVC see frame part list page 5.4.1
35a Striker plate SL-RS(for comfort mushroom head cams)
A... Timber see frame part list page 5.4.1
35 Striker plate SL-RS A... PVC see frame part list page 5.4.1
36-37Bag frame parts PSK 200-Z Right
LeftA...A... Timber see frame part list page 5.4.1
2A... PVC see frame part list page 5.4.1
Requirement acc. to profile system for WK133a Striker plate 56
(for standard locking cams)
A... Timber see frame part list page 5.4.18...12
33 A... PVC see frame part list page 5.4.1
34aStriker plate S-ES PSK 200-Z(for mushroom head cams) A... Timber see frame part list page 5.4.1
534 Striker plate S-ES A... PVC see frame part list page 5.4.1
35aStriker plate SL-RS(for comfort mushroom head cams) A... Timber see frame part list page 5.4.1
35 Striker plate SL-RS A... PVC see frame part list page 5.4.1
34b
Striker plate S-ES1)
1) For PSK PORTAL elements right-hand version, use striker plate in right-hand design (RH),for PSK PORTAL elements left-hand version use striker plate in left-hand design (LH).
Right A... Timber see frame part list page 5.4.1
1A... PVC see frame part list page 5.4.1
Left A... Timber see frame part list page 5.4.1
A... PVC see frame part list page 5.4.1
36-37 Bag frame parts PSK 200-Z RightLeft
A...A... Timber see frame part list page 5.4.1
2A........ PVC see frame part list page 5.4.1
Accessories on request38 Cover cap S PKAL0010-... ...025010 ...002010 ...012010 ...030010 4
39 Location piece 702543 0..4
2011-08
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle controlOverview of sets?scheme C, variant 2a - basic security and WK 1
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle controlOverview of sets?scheme C, variant 2a - basic security and WK 1
Fitting diagram PSK PORTAL 200-Z PLUS scheme C variant 2b see inside
5.1.10
12/18-9
5.3.10
2011-08
2 sliding sashes/2 fixed glazing
Scheme C 19 14 15
33a 39
24
11
23
31
33a
39
14
2236
31
9
8
10
37
363139
■ in carton handle Si-line PSK 200-Z/GH
■ in carton corner drive PSK 200-Z
■ in carton bogie wheels PSK 160/200-Z PLUS
■ in profile set PSK PLUS
■ in bag frame parts PSK 200-Z
■ in carton gear set PSK 200-Z
34a/35a
33a
33a
33a
33a
38 38
5.1.4
17
12
29
21
16
30
18
13
28 27 261816
18
18
20
191415
33a39
24
11
23
31
33a
39
14
22 34a
31
9
8a
10a
37
36 31 39
34a/35a
33a
33a
33a 3838
5.1.4
17
12
29
21
16
30
18
13
28272618 16
18
18
20
�� ��
�� ��
31a
41 40
45
52
31
51
Size rangeSash rebate width (mm) 770 to 20001)
1) For sash rebate widths that are < 944 mm, the sash rebate height must not exceed 2.5x the sash rebate width.
Sash rebate height for scheme C (mm) 1460 to 2360
Exterior width of frame (mm)Depends on profile system;
determined by the sash rebate width
Sash weight (kg) max. 200Handle height, constant (mm) 990
50 42
45
52
4140 51
5042
Main sash Secondary sash
33a
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle controlFitting diagram scheme C, variant 2b - basic security
33a33a 33a
Surface TSSurface TS
5.1.11 5.1.11
12/18 - 9 12/18 - 9
Fitting diagram
PSK PORTAL 200-ZPLUS scheme A WK 2
see inside
Item Description
Material number Pc.
Base no.... ... Colour no.
Silver RAL 9003 white
RAL 8022 brown middle bronze Scheme C,
variant 2b
Requirement acc. to SRH
31
Linkage(with standard locking cams)
Size169/2192215238
SRH (mm)1460 to 16901690 to 19201921 to 21502151 to 2360
Handle position690990990990
1222
PZKL0240-100010713952713969713976
3
Linkage S-ES(with mushroom head cams)
Size192215238
SRH (mm)1690 to 19201921 to 21502151 to 2360
Handle position990990990
222
713877713884713891
Linkage S-RS(with comfort mushroom head cams)
Size169/2192215238
SRH (mm)1460 to 16901690 to 19201921 to 21502151 to 2360
Handle position690990990990
1222
PZKL0310-100010PZKL0320-100010PZKL0330-100010PZKL0340-100010
31a
LinkageScheme C(with pre-installedstriker plates)
Size169/2192215238
SRH (mm)1460 to 16901690 to 19201921 to 21502151 to 2360
Handle position690990990990
PZKL0250-100010716366716373716380
1
Linkage S-ESScheme C(with pre-installedstriker plates S-ES)
Size192215238
SRH (mm)1690 to 19201921 to 21502151 to 2360
Handle position990990990
PZKL0010-100010PZKL0020-100010PZKL0030-100010
Linkage S-RSScheme C(with pre-installedstriker plates S-RS)
Size169/2192215238
SRH (mm)1460 to 16901690 to 19201921 to 21502151 to 2360
Handle position690990990990
PZKL0350-100010PZKL0360-100010PZKL0370-100010PZKL0380-100010
Requirement acc. to profile system for basic security33a Striker plate 56
(for standard locking cams)
A... Timber see frame part list page 5.4.111...15
33 A... PVC see frame part list page 5.4.1
34a Striker plate S-ES PSK 200-Z(for mushroom head cams)
A... Timber see frame part list page 5.4.1
334 Striker plate S-ES A... PVC see frame part list page 5.4.1
35a Striker plate SL-RS(for comfort mushroom head cams)
A... Timber see frame part list page 5.4.1
35 Striker plate SL-RS A... PVC see frame part list page 5.4.1
36-37Bag frame parts PSK 200-Z
RightLeft
A...A... Timber see frame part list page 5.4.1
2A... PVC see frame part list page 5.4.1
Accessories on request38 Cover cap S PKAL0010-... ...025010 ...002010 ...012010 ...030010 4
39 Location piece 702543 0..4
2011-08
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle controlOverview of sets scheme C, variant 2b - basic security
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle controlOverview of sets scheme C, variant 2b - basic security
Item Description
Material number Pc.
Base no.... ... Colour no.
Silver RAL 9003 white RAL 8022 brown middle bronze Scheme C,
variant 2b
Basic requirements
40..42 Carton handle Si-Line HSK 250
PMHC0010-... ...524010 ...502010 ...512010 ...530010 2
44 Countersunk screw M5x45 863329 445 Sleeve nut 800287 4
51-52 Gear set PSK 200-Z
PZ-30PZ-40PZ-45PZ-50
Backset 30 mm40 mm45 mm50 mm
716335716342716359720691
2
6-11
Corner drive PSK 200-Z Right 9 mm groove axis S-ES 2 2 – PMEL0041-100010
1
9 mm groove axis S-RS 2 – 2 PMEL0021-100010
13 mm groove axis S-ES 2 2 – PMEL0031-100010
13 mm groove axis S-RS 2 – 2 PMEL0011-100010
Left 9 mm groove axis S-ES 2 2 – PMEL0042-100010
9 mm groove axis S-RS 2 – 2 PMEL0022-100010
13 mm groove axis S-ES 2 2 – PMEL0032-100010
13 mm groove axis S-RS 2 – 2 PMEL0012-100010
6-11
Corner drive PSK 200-Z Right 9 mm groove axis S-ES 2 2 – PMEL0081-100010
1
Scheme C1)
1) Contains corner drive PSK 200-Z scheme C: like corner drive PSK 200-Z but with corner drive VSO S-ES scheme C and VSU S-ES scheme C.
9 mm groove axis S-RS 2 – 2 PMEL0061-100010
13 mm groove axis S-ES 2 2 – PMEL0071-100010
13 mm groove axis S-RS 2 – 2 PMEL0051-100010
Left 9 mm groove axis S-ES 2 2 – PMEL0082-100010
9 mm groove axis S-RS 2 – 2 PMEL0062-100010
13 mm groove axis S-ES 2 2 – PMEL0072-100010
13 mm groove axis S-RS 2 – 2 PMEL0052-100010
12-15Carton bogie wheels PSK PLUS Right PMKJ0031-100010 1
Left PMKJ0032-100010 1
Required for sash weight > 160 kg 16 Bogie wheels M PSK PLUS Right PLWL0031-100010 42)
2) Required for sash weight > 160 kg, at least one sash width of > 935 mm is required.
Left PLWL0032-100010 42)
Requirement acc. to SRW and EWF17-30
Profile set PSK PLUS
Size 3)
87/200107/240130/286160/346200/426
3) To precisely determine the required size, you must calculate the dimensions of SRW and EWF.
SRW (mm)770 to 870871 to 1070
1071 to 13001301 to 16001601 to 2000
EWF (mm)to 2000
2001 to 24002401 to 28602861 to 34603461 to 4260
PMPJ0100-...PMPJ0110-...PMPJ0120-...PMPJ0130-...PMPJ0140-...
...525010
...525010
...525010
...525010
...525010
...502010
...502010
...502010
...502010
...502010
...512011
...512011
...512011
...512011
...512011
...531011
...531011
...531011
...531011
...531011
24)
4) Symmetrical design; point of separation must be in the centre between the sliding sashes.
Requirement acc. to SRW
31
Linkage(with standard locking cams)
Size100123 146 169 169/2192215
SRW (mm)770 to 850851 to 1000
1001 to 12301231 to 14601461 to 16901461 to 16901691 to 19201921 to 2000
loose drive rod and face plate5)
5) Use loose drive rod and face plate from the remnants of the current production.
–1122122
–713914713921713938713945
PZKL0240-100010713952713969
4
Linkage S-ES(with mushroom head cams)
Size100123146169192215
SRW (mm)770 to 850851 to 1000
1001 to 12301231 to 14601461 to 16901691 to 19201921 to 2000
loose drive rod and face plate4) –
112222
–713839713846713853713860713877713884
Linkage S-RS(with comfort mushroom head cams)
Size100123146169192215
SRW (mm)770 to 850851 to 1000
1001 to 12301231 to 14601461 to 16901691 to 19201921 to 2000
loose drive rod and face plate4) –
112222
–PZKL0270-100010PZKL0280-100010PZKL0290-100010PZKL0300-100010PZKL0320-100010PZKL0330-100010
5.1.12
12/18-9
1a
25 19
20
14 15 34a 24
32
7
34a
34a
11
32
14
34a
36
31
98
10
2
37 37
36
34a
31
34a
34a
34a
34a
34a
38 38
34a
34a
43
4
3
3
4
Size range
SRW (mm) 770 to 20001)
1) For sash rebate widths < 944 mm, the sash rebate heightmust not be greater than 2.5x the sash rebate width.
SRH (mm) 1000 to 2360
EWF (mm) depends on profile system; de-termined by the SRH
Sash weight (kg) max. 200
5.3.12
6c
39
39
39
39
2011-08
2322
17
12
29
21
16
30
18
13
28 27 261816
18
18
■ in carton handle Si-line PSK 200-Z/GH
■ in carton corner drive PSK 200-Z
■ in carton bogie wheels PSK 160/200-Z PLUS
■ in profile set PSK PLUS
■ in bag frame parts PSK 200-Z
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle controlFitting diagram scheme A - WK 2
Surface TS
5.1.13 5.1.13
12/18 - 9Surface TS 12/18 - 9
Fitting diagram
PSK PORTAL 200-ZPLUS scheme C variant 2a WK 2
see inside
Item Description
Material number Quantity for scheme
Base no.... ... Colour no.A G K
Silver RAL 9003 white
RAL 8022 brown middle bronze
Basic requirements for WK2
1-2Handle PSK200/GH Right Lockable (incl. 1 key 2W145) – 296356 296370 298510 296394
1 11
Left Lockable (incl. 1 key 2W145) – 296400 296424 298527 296448 1
6c Coupling bracket WK2 PGZL0040-100010 1 1 2
3Run up block R A0800
A1361 Eurogroove 7/8 x 4Eurofalz 18/8
873670873618
3 3 6
4 Run up block F 873656 3 3 6
Basic requirements
6-11
Corner drive PSK 200-Z Right 9 mm groove axis S-ES 2/4 – PMEL0041-100010
1 1
19 mm groove axis S-RS – 2/4 PMEL0021-100010
13 mm groove axis S-ES 2/4 – PMEL0031-100010
13 mm groove axis S-RS – 2/4 PMEL0011-100010
Left 9 mm groove axis S-ES 2/4 – PMEL0042-100010
19 mm groove axis S-RS – 2/4 PMEL0022-100010
13 mm groove axis S-ES 2/4 – PMEL0032-100010
13 mm groove axis S-RS – 2/4 PMEL0012-100010
12-15Carton bogie wheels PSK PLUS Right PMKJ0031-100010
1 11
Left PMKJ0032-100010 1
Required for sash weight > 160 kg 16 Bogie wheels M PSK PLUS Right PLWL0031-100010
21)
1) Required for sash weight > 160 kg, at least one sash width of > 935 mm is required.
21) 21)
Left PLWL0032-100010 21)
Requirements of SRW and EWF
17-30 Profile set PSK PLUS
Size2)
87/200107/240130/286160/346200/426
2) To precisely determine the required size, you must calculate the dimensions of SRW and EWF.
Sash rebate width (mm)
770 to 870871 to 1070
1071 to 13001301 to 16001601 to 2000
EWF (mm)to 2000
2001 to 24002401 to 28602861 to 34603461 to 4260
PMPJ0100-...PMPJ0110-...PMPJ0120-...PMPJ0130-...PMPJ0140-...
...525010
...525010
...525010
...525010
...525010
...502010
...502010
...502010
...502010
...502010
...512011
...512011
...512011
...512011
...512011
...531011
...531011
...531011
...531011
...531011
1 1 23)
3) Symmetrical design; point of separation must be in the centre between the sliding sashes.
Requirements of SRW
31
Linkage S-ES(with mushroom head cams)
Size100123146169192215
Sash rebate width (mm)
770 to 850851 to 1000
1001 to 12301231 to 14601461 to 16901691 to 19201921 to 2000
loose drive rod and face plate4)
4) Use loose drive rod and face plate from the remnants of the current production.
112222
–713839713846713853713860713877713884
2 2 4
Linkage S-RS(with comfort mushroom head cams)
Size100123146169192215
Sash rebate width (mm)
770 to 850851 to 1000
1001 to 12301231 to 14601461 to 16901691 to 19201921 to 2000
loose drive rod and face plate4) 1
12222
–PZKL0270-100010PZKL0280-100010PZKL0290-100010PZKL0300-100010PZKL0320-100010PZKL0330-100010
Requirement acc. to SRH
32
Gear OS S-ES(with mushroom head cams)
Size123146169192215238
SRH (mm)1000 to 12301231 to 14601461 to 16901690 to 19201921 to 21502151 to 2360
Handle position490590690990990990
–11222
713303713761713778713785713792713808
2 2 4Gear OS S-RS(with comfort mushroom head cams)
Size123146169192215238
SRH (mm)1000 to 12301231 to 14601461 to 16901690 to 19201921 to 21502151 to 2360
Handle position490590690990990990
–11222
713303PGKL0130-100030PGKL0140-100010PGKL0150-100010PGKL0160-100010PGKL0170-100010
Item Description
Material number Quantity for scheme
Base no.... ... Colour no.A G K
Silver RAL 9003 white
RAL 8022 brown middle bronze
Requirement acc. to profile system for WK2
34a Striker plate S-ES PSK 200-Z A... Timber see frame part list page 5.4.1
6..12
6..12
12..24
34 Striker plate S-ES A... PVC see frame part list page 5.4.1
35a Striker plate SL-RS(for comfort mushroom head cams)
A... Timber see frame part list page 5.4.1
35 Striker plate SL-RS A... PVC see frame part list page 5.4.1
36-37Bag frame parts PSK 200-Z Right
LeftA...A... Timber see frame part list page 5.4.1
1 1 2A... PVC see frame part list page 5.4.1
Accessories on request
38 Cover cap S PKAL0010-... ...025010 ...002010 ...012010 ...030010 2 2 4
39 Location piece 702543 0..4 0..4 0..4
2011-08
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle controlOverview of sets?schemes A, G and K - WK 2
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle controlOverview of sets?schemes A, G and K - WK 2
5.1.14
12/18-9
5.3.14
2011-08
2 sliding sashes/2 fixed glazing
Scheme C
1a
19 14 15 34a
39
24
39
7
6c
11
23
32
39
14
2236
31
9
8
10
2
37 37
3631 39
■ in carton handle Si-line PSK 200-Z/GH
■ in carton corner drive PSK 200-Z
■ in carton bogie wheels PSK 160/200-Z PLUS
■ in profile set PSK PLUS
■ in bag frame parts PSK 200-Z 34a
34a
34a
3838
34a
17
12
29
21
16
30
18
13
28 27 261816
18
18
20
19141534a
39
24
11
23
32
39
14
2234a
34a
31
9
8a
10a
37
36 31 39
34a
34a
34a
3838
34a
17
12
29
21
16
30
18
13
28272618 16
18
18
20
53
�� ��
31a
34b
34a
34a
34a
34a
34a
Size range
Sash rebate width (mm) 770 to 20001)
1) For sash rebate widths that are < 944 mm, the sash rebate height must not exceed 2.5x the sash rebate width.
Sash rebate height for scheme C (mm)
1460 to 2360
Exterior width of frame (mm)depends on profile system;
determined by the sash rebate width
Sash weight (kg) max. 200Handle height, constant (mm) 990
Main sash Secondary sash
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle controlFitting diagram scheme C, variant 2a - WK 2
5
43
4
33
4
Surface TSSurface TS
5.1.15 5.1.15
12/18 - 9 12/18 - 9
Fitting diagram
PSK PORTAL 200-ZPLUS scheme A 4 mm airgap
see inside
Item Description
Material number Pc.
Base no.... ... Colour no.
Silver RAL 9003 white RAL 8022 brown middle bronze Scheme C
Variant 2a
Basic requirements for WK2
1-2 Handle PSK200/GH Right Lockable (incl. 1 key 2W145) – 296356 296370 298510 296394 1Left Lockable (incl. 1 key 2W145) – 296400 296424 298527 296448 1
6c Coupling bracket WK2 PGZL0040-100010 1
5 Protection against misalignment PSZL0020-100010 1
3 Run up block R A0800A1361
Eurogroove 7/8 x 4Eurofalz 18/8
873670873618 3
4 Run up block F 873656 3
Basic requirements53 Operating lever PHZL0010-100010 1
6-11
Corner drive PSK 200-Z Right 9 mm groove axis S-ES 4 – PMEL0041-100010
1
9 mm groove axis S-RS – 4 PMEL0021-100010
13 mm groove axis S-ES 4 – PMEL0031-100010
13 mm groove axis S-RS – 4 PMEL0011-100010
Left 9 mm groove axis S-ES 4 – PMEL0042-100010
9 mm groove axis S-RS – 4 PMEL0022-100010
13 mm groove axis S-ES 4 – PMEL0032-100010
13 mm groove axis S-RS – 4 PMEL0012-100010
6-11
Corner drive PSK 200-Z Right 9 mm groove axis S-ES 4 – PMEL0081-100010
1
Scheme C1)
1) Contains corner drive PSK 200-Z scheme C: like corner drive PSK 200-Z but with corner drive VSO S-ES scheme C and VSU S-ES scheme C.
9 mm groove axis S-RS – 4 PMEL0061-100010
13 mm groove axis S-ES 4 – PMEL0071-100010
13 mm groove axis S-RS – 4 PMEL0051-100010
Left 9 mm groove axis S-ES 4 – PMEL0082-100010
9 mm groove axis S-RS – 4 PMEL0062-100010
13 mm groove axis S-ES 4 – PMEL0072-100010
13 mm groove axis S-RS – 4 PMEL0052-100010
12-15Carton bogie wheels PSK PLUS Right PMKJ0031-100010 1
Left PMKJ0032-100010 1
Required for sash weight > 160 kg16 Bogie wheels M PSK PLUS Right PLWL0031-100010 42)
2) Required for sash weight > 160 kg, at least one sash width of > 935 mm is required.
Left PLWL0032-100010 42)
Requirements of SRW and EWF
17-30 Profile set PSK PLUS
Size3)
87/200107/240130/286160/346200/426
3) To precisely determine the required size, you must calculate the dimensions of SRW and EWF.
SRW (mm)770 to 870871 to 1070
1071 to 13001301 to 16001601 to 2000
EWF (mm)to 2000
2001 to 24002401 to 28602861 to 34603461 to 4260
PMPJ0100-...PMPJ0110-...PMPJ0120-...PMPJ0130-...PMPJ0140-...
...525010
...525010
...525010
...525010
...525010
...502010
...502010
...502010
...502010
...502010
...512011
...512011
...512011
...512011
...512011
...531011
...531011
...531011
...531011
...531011
24)
4) Symmetrical design; point of separation must be in the centre between the sliding sashes.
Requirements of SRW
31
Linkage S-ES(with mushroom head cams)
Size100123146169192215
SRW (mm)770 to 850851 to 1000
1001 to 12301231 to 14601461 to 16901691 to 19201921 to 2000
loose drive rod and face plate5)
5) Use loose drive rod and face plate from the remnants of the current production.
112222
–713839713846713853713860713877713884
4Linkage S-RS(with comfort mushroom head cams)
Size100123146169192215
SRW (mm)770 to 850851 to 1000
1001 to 12301231 to 14601461 to 16901691 to 19201921 to 2000
loose drive rod and face plate5) 1
12222
–PZKL0270-100010PZKL0280-100010PZKL0290-100010PZKL0300-100010PZKL0320-100010PZKL0330-100010
Item Description
Material number Pc.
Base no.... ... Colour no.
Silver RAL 9003 white
RAL 8022 brown middle bronze Scheme C
Variant 2a
Requirements of SRH
32
Gear OS S-ES(with mushroom head cams)
Size192215238
SRH (mm)1690 to 19201921 to 21502151 to 2360
Handle position990990990
222
713785713792713808
3Gear OS S-RS(with comfort mushroom head cams)
Size169192215238
SRH (mm)1460 to 16901690 to 19201921 to 21502151 to 2360
Handle position690990990990
1222
PGKL0140-100010PGKL0150-100010PGKL0160-100010PGKL0170-100010
31a
LinkageScheme C(with pre-installedstriker plates S-ES)
Size192215238
SRH (mm)1690 to 19201921 to 21502151 to 2360
PZKL0010-100010PZKL0020-100010PZKL0030-100010
1Linkagescheme C(with pre-installedS-RS striker plates)
Size169/2192 215 238
SRH (mm)1460 to 16901690 to 19201921 to 21502151 to 2360
PZKL0350-100010PZKL0360-100010PZKL0370-100010PZKL0380-100010
Requirement acc. to profile system for WK234a Striker plate S-ES PSK 200-Z A... Timber see frame part list page 5.4.1
13..1734 Striker plate S-ES A... PVC see frame part list page 5.4.1
35a Striker plate SL-RS(for comfort mushroom head cams)
A... Timber see frame part list page 5.4.1
35 Striker plate SL-RS A... PVC see frame part list page 5.4.1
34b
Striker plate S-ES1)
1) For PSK PORTAL elements right-hand version, use striker plate in right-hand design (RH), for PSK PORTAL elements left-hand version use striker plate in left-hand design (LH).
RightLeft
A...A... Timber see frame part list page 5.4.1
1
A... PVC see frame part list page 5.4.1
Striker plate SL-RS(for comfort mushroom head cams)
A... Timber see frame part list page 5.4.1
A... PVC see frame part list page 5.4.1
35aBag frame parts PSK 200-Z2)
2) For PSK PORTAL elements right-hand version, use locking piece in right-hand design (RH), for PSK PORTAL elements left-hand version use locking piece in left-hand design (LH).
RightLeft
A...A... Timber see frame part list page 5.4.1
A... PVC see frame part list page 5.4.1
36-37Striker plate S-ES PSK 200-Z A... Timber see frame part list page 5.4.1
2Striker plate S-ES A... PVC see frame part list page 5.4.1
Accessories on request38 Cover cap S PKAL0010-... ...025010 ...002010 ...012010 ...030010 4
39 Location piece 702543 0..4
Continued on next table
2011-08
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle controlOverview of sets scheme C, variant 2a - WK 2
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle controlOverview of sets scheme C, variant 2a - WK 2
5.1.16
4/18-94/15-9
1
25 19
20
1415
33ab 39
24
33a
39
32
7
6
33a
11
31
33a
39
14
33a
36
31 9
8
10
2
37
37
36
33a
31 39
Size range
SRW (mm) 770 to 20001)
1) For sash rebate widths < 944 mm, the sash rebate heightmust not be greater than 2.5x the sash rebate width.
SRH (mm) 1000 to 2360
EWF (mm) depends on profile system; de-termined by the SRH
Sash weight (kg) max. 200
Total frame to sash clearance(mm)
125
33a
33a
33ab
33a
38 38
1a 2
WK 1
WK 1 WK 1
5.3.16
2011-08
2322
17
12
29
21
16
30
18
13
28 27 261816
18
18
■ in carton handle Si-line PSK 200-Z/GH
■ in carton corner drive PSK 200-Z
■ in carton bogie wheels PSK 160/200-Z PLUS
■ in profile set PSK PLUS
■ in bag frame parts PSK 200-Z
34a/35a
34a/35a 34a/
35a
34a/35a
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle controlFitting diagram schemes A, G and K - basic security and WK 1
5.1.17 5.1.17
Surface TS Surface TS4/18-94/15-9
4/18-94/15-9
Fitting diagram
PSK PORTAL 200-ZPLUS scheme C, variant 1 – 4 mm airgap
see inside
Item Description
Material number Quantity for scheme
Basic no. .... ... Colour no.A G K
silver RAL 9003 white
RAL 8022 brown middle bronze
Basic requirements for basic security and WK 1
1-2Handle PSK200/GH
Right Standard – 296257 296271 297797 296295
1 11
For WK1 Lockable (incl. 1 key 2W145) – 296356 296370 298510 296394
Left Standard – 296301 296325 297803 2963491
For WK1 Lockable (incl. 1 key 2W145) – 296400 296424 298527 2964486a Coupling bracket 15 Only with 4/15-9 717240 0..1 0..1 0..2
6-11
Corner drive PSK 200-Z Right 9 mm groove axis S-ES 2/0 2/4 – PMEL0041-100010
1 1
19 mm groove axis S-RS 2/0 – 2/4 PMEL0021-100010
13 mm groove axis S-ES 2/0 2/4 – PMEL0031-100010
13 mm groove axis S-RS 2/0 – 2/4 PMEL0011-100010
Left 9 mm groove axis S-ES 2/0 2/4 – PMEL0042-100010
19 mm groove axis S-RS 2/0 – 2/4 PMEL0022-100010
13 mm groove axis S-ES 2/0 2/4 – PMEL0032-100010
13 mm groove axis S-RS 2/0 – 2/4 PMEL0012-100010
12-15Carton bogie wheels PSK PLUS Right PMKJ0031-100010
1 11
Left PMKJ0032-100010 1
Required for sash weight > 160 kg for basic security and WK 1 16 Bogie wheels M PSK PLUS Right PLWL0031-100010
21)
1) Required for sash weight > 160 kg, at least one sash width of > 935 mm is required.
21) 21)
Left PLWL0032-100010 21)
Requirement acc. to FFB and RAB for basic security and WK 1
17-30 Profile set PSK PLUS
Size2)
87/200 107/240 130/286 160/346 200/426
2) To precisely determine the required size, calculate the dimensions of FFB and RAB.
SRW (mm)770 to 870 871 to 1070
1071 to 1300 1301 to 1600 1601 to 2000
EWF (mm)to 2000
2001 to 2400 2401 to 2860 2861 to 3460 3461 to 4260
PMPJ0100-...PMPJ0110-...PMPJ0120-...PMPJ0130-...PMPJ0140-...
...525010
...525010
...525010
...525010
...525010
...502010
...502010
...502010
...502010
...502010
...512011
...512011
...512011
...512011
...512011
...531011
...531011
...531011
...531011
...531011
1 1 23)
3) Symmetrical design; point of separation must be in the centre between the sliding sashes.
Requirement acc. to FFB for basic security and WK 1
31
Linkage(with standard locking cams)
Size 100 123 146 169 169/2 192 215
SRW (mm)770 to 850 851 to 1000
1001 to 1230 1231 to 1460 1461 to 1690 1461 to 1690 1691 to 1920 1921 to 2000
Loose drive rod and face plate4)
4) Use loose drive rod and face plate from offcuts from ongoing production.
–1122122
–713914713921713938713945
PZKL0240-100010713952713969
2 2 4
Linkage S-ES(with mushroom head cams)
Size 100 123 146 169 192 215
SRW (mm)770 to 850 851 to 1000
1001 to 1230 1231 to 1460 1461 to 1690 1691 to 1920 1921 to 2000
loose drive rod and face plate4) –
112222
–713839713846713853713860713877713884
Linkage S-RS(with comfort mushroom head cams)
Size 100 123 146 169 192 215
SRW (mm)770 to 850 851 to 1000
1001 to 1230 1231 to 1460 1461 to 1690 1691 to 1920 1921 to 2000
loose drive rod and face plate4) –
112222
–PZKL0270-100010PZKL0280-100010PZKL0290-100010PZKL0300-100010PZKL0320-100010PZKL0330-100010
Requirement acc. to FFH for basic security and WK 1
32
Gear OS (with standard locking cams)
Size123 146 169 192 215 238
SRH (mm)1000 to 1230 1231 to 1460 1461 to 1690 1690 to 1920 1921 to 2150 2151 to 2360
Handle position490590690990990990
–11222
713303713297713341713815713358713334
1 1 2
Gear OS S-ES (with mushroom head cams)
Size123 146 169 192 215 238
SRH (mm)1000 to 1230 1231 to 1460 1461 to 1690 1690 to 1920 1921 to 2150 2151 to 2360
Handle position490590690990990990
–11222
713303713761713778713785713792713808
Item Description
Material number Quantity for scheme
Basic no. .... ... Colour no.A G K
silver RAL 9003 white
RAL 8022 brown middle bronze
Requirement acc. to FFH for basic security and WK 1
32
Gear OS S-RS(with comfort mushroom head cams)
Size123 146 169 192 215 238
SRH (mm)1000 to 1230 1231 to 1460 1461 to 1690 1690 to 1920 1921 to 2150 2151 to 2360
Handle position490590690990990990
–11222
713303PGKL0130-100030PGKL0140-100010PGKL0150-100010PGKL0160-100010PGKL0170-100010
1 1 2
Requirement acc. to FFH for basic security and WK 1
31
Linkage (with standard locking cams)
Size123 146 169 192 215 238
SRH (mm)1000 to 1230 1231 to 1460 1461 to 1690 1690 to 1920 1921 to 2150 2151 to 2360
122222
713921713938713945713952713969713976
1 1 2
Linkage S-ES (with mushroom head cams)
Size123 146 169 192 215 238
SRH (mm)1000 to 1230 1231 to 1460 1461 to 1690 1690 to 1920 1921 to 2150 2151 to 2360
122222
713846713853713860713877713884713891
Linkage S-RS(with comfort mushroom head cams)
Size123 146 169 192 215 238
SRW (mm)1000 to 1230 1231 to 1460 1461 to 1690 1691 to 1920 1921 to 2150 2151 to 2360
122222
PZKL0280-100010PZKL0290-100010PZKL0300-100010PZKL0320-100010PZKL0330-100010PZKL0340-100010
Requirements of profile system for basic security
33a Striker plate PSK 200-Z (for standard locking cams)
Right Left
A... A... see frame part list on page 5.4.1 3..8 3..8 6..
16
34a Striker pl. S-ES PSK 200-Z(for mushroom head cams)
A... see frame part list on page 5.4.1
2 2 435a Striker pl. S-RS PSK 200-Z
(for comfort mushroom head cams)A...
see frame part list on page 5.4.1
34b Striker pl. 56 top crosswise A... see frame part list on page 5.4.1 1..2 1..2 2..4
36-37 Bag frame pts. PSK 200-Z A... see frame part list on page 5.4.1 1 1 2
Requirement acc. to profile system for WK 1
33a Striker plate PSK 200-Z (for standard locking cams)
Right Left
A... A... see frame part list on page 5.4.1 3..8 3..8 6..
16
34a Striker pl. S-ES PSK 200-Z(for mushroom head cams)
A... see frame part list on page 5.4.1
2 2 435a Striker pl. S-RS PSK 200-Z
(for comfort mushroom head cams)A...
see frame part list on page 5.4.1
34b Striker pl. 56 top crosswise A... see frame part list on page 5.4.1 1..2 1..2 2..4
36-37 Bag frame pts. PSK 200-Z A... see frame part list on page 5.4.1 1 1 2
Accessories upon request for basic security and WK 1
38 Cover cap S PKAL0010-... ...025010 ...002010 ...012010 ...030010 2 2 4
39 Location piece 702543 0..4 0..4 0..4
2011-08
PSK PORTAL 200-Z PLUSParallel tilt & slide hardware with handle controlOverview of sets schemes A, G and K - basic security and WK 1
PSK PORTAL 200-Z PLUSParallel tilt & slide hardware with handle controlOverview of sets schemes A, G and K - basic security and WK 1
5.1.18
4/18-94/15-9
����
����
2 sliding sashes/2 fixed glazing
Scheme C
1
19 14 15
33a 39
24
39
32
7
6
11
23
32
39
14
22
33a
36
31 9
8
10
2
37
37
363139
■ in carton handle Si-line PSK 200-Z/GH
■ in carton corner drive PSK 200-Z
■ in carton bogie wheels PSK 160/200-Z PLUS
■ in profile set PSK PLUS
■ in bag frame parts PSK 200-Z 34a/35a
33a
33a
33a
33a
38 38
Size range
SRW (mm) 770 to 20001)
1) For sash rebate widths < 944 mm, the sash rebate height must not be greater than 2.5x the sash rebate width.
SRH (mm) 1000 to 2360
EWF (mm) depends on profile system; de-termined by the SRH
Sash weight (kg) max. 200
Total frame to sash clearance(mm)
125
17
12
29
21
16
30
18
13
28 27 261816
18
18
20
1
191415
33a39
24
39
32
7
6
11
23
32
33a
39
14
22
33a
34a
319
8a
10a
2
37
36 3139
34a/35a
33a
33a
33a
33a
3838
17
12
29
21
16
30
18
13
28272618 16
18
18
20
33a
33a33a
33a
33a
34c/35a
Main sashSecondary sash
5.1.18
2011-08
5.3.18
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle controlFitting diagram?scheme C, variant 1 - basic security
Surface TSSurface TS
5.1.19 5.1.19
4/18-94/15-9
4/18-94/15-9
Fitting diagram
PSK PORTAL 200-ZPLUS scheme C, variant 2a – 4 mm airgap
see inside
Item Description
Material number Pc.
Base no.... ... Colour no.
Silver RAL 9003 white
RAL 8022 brown middle bronze Scheme C
Variant 1
Basic requirements
1-2
Handle PSK200/GHRight Standard – 296257 296271 297797 296295
2Lockable (incl. 1 key 2W145) – 296356 296370 298510 296394
Left Standard – 296301 296325 297803 296349
Lockable (incl. 1 key 2W145) – 296400 296424 298527 296448
6-11
Corner drive PSK 200-Z Right 9 mm groove axis S-ES 2 2 – PMEL0041-100010
1
9 mm groove axis S-RS 2 – 2 PMEL0021-100010
13 mm groove axis S-ES 2 2 – PMEL0031-100010
13 mm groove axis S-RS 2 – 2 PMEL0011-100010
Left 9 mm groove axis S-ES 2 2 – PMEL0042-100010
9 mm groove axis S-RS 2 – 2 PMEL0022-100010
13 mm groove axis S-ES 2 2 – PMEL0032-100010
13 mm groove axis S-RS 2 – 2 PMEL0012-100010
6-11
Corner drive PSK 200-Z Right 9 mm groove axis S-ES 2 2 – PMEL0081-100010
1
Scheme C1)
1) Contains corner drive PSK 200-Z scheme C:like the standard carton, except instead of standard corner drives VSO S-ES, VSU S-ES with corner drives VSO S-ES scheme C and VSU S-ES scheme C.
9 mm groove axis S-RS 2 – 2 PMEL0061-100010
13 mm groove axis S-ES 2 2 – PMEL0071-100010
13 mm groove axis S-RS 2 – 2 PMEL0051-100010
Left 9 mm groove axis S-ES 2 2 – PMEL0082-100010
9 mm groove axis S-RS 2 – 2 PMEL0062-100010
13 mm groove axis S-ES 2 2 – PMEL0072-100010
13 mm groove axis S-RS 2 – 2 PMEL0052-100010
12-15Carton bogie wheels PSK PLUS Right PMKJ0031-100010 1
Left PMKJ0032-100010 1
Required for sash weight > 160 kg 16 Bogie wheels M PSK PLUS Right PLWL0031-100010 42)
2) Required for sash weight > 160 kg, at least one sash width of > 935 mm is required.
Left PLWL0032-100010 42)
Requirements of SRW and EWF
17-30 Profile set PSK PLUS
Size3)
87 /200107 /240130 /286160 /346200 /426
3) To precisely determine the required size, you must calculate the dimensions of SRW and EWF.
SRW (mm)770 to 870871 to 1070
1071 to 13001301 to 16001601 to 2000
EWF (mm)to 2000
2001 to 24002401 to 28602861 to 34603461 to 4260
PMPJ0100-...PMPJ0110-...PMPJ0120-...PMPJ0130-...PMPJ0140-...
...525010
...525010
...525010
...525010
...525010
...502010
...502010
...502010
...502010
...502010
...512011
...512011
...512011
...512011
...512011
...531011
...531011
...531011
...531011
...531011
24)
4) Symmetrical design; point of separation must be in the centre between the sliding sashes.
Requirements of SRW
31
Linkage(with standard locking cams)
Size100123 146 169 169/2192215
SRW (mm)770 to 850851 to 1000
1001 to 12301231 to 14601461 to 16901461 to 16901691 to 19201921 to 2000
loose drive rod and face plate5)
5) Use loose drive rod and face plate from the remnants of the current production.
–1122122
–713914713921713938713945
PZKL0240-100010713952713969
4
Linkage S-ES(with mushroom head cams)
Size100123146169192215
SRW (mm)770 to 850851 to 1000
1001 to 12301231 to 14601461 to 16901691 to 19201921 to 2000
loose drive rod and face plate4) –
112222
–713839713846713853713860713877713884
Linkage S-RS(with comfort mushroom head cams)
Size100123146169192215
SRW (mm)770 to 850851 to 1000
1001 to 12301231 to 14601461 to 16901691 to 19201921 to 2000
loose drive rod and face plate4) –
112222
–PZKL0270-100010PZKL0280-100010PZKL0290-100010PZKL0300-100010PZKL0320-100010PZKL0330-100010
Item Description
Material number Pc.
Base no.... ... Colour no.
Silver RAL 9003 white
RAL 8022 brown middle bronze Scheme C
Variant 1
Requirements of SRH
32
Gear OS(with standard locking cams)
Size123146169192215238
SRH (mm)1000 to 12301231 to 14601461 to 16901690to19201921to21502151to2360
Handle position490590690990990990
–11222
713303713297713341713815713358713334
4
Gear OS S-ES(with mushroom head cams)
Size123146169192215238
SRH (mm)1000 to 12301231 to 14601461 to 16901690to19201921to21502151to2360
Handle position490590690990990990
–11222
713303713761713778713785713792713808
Gear OS S-RS(with comfort mushroom head cams)
Size123146169192215238
SRH (mm)1000 to 12301231 to 14601461 to 16901690 to 19201921 to 21502151 to 2360
Handle position490590690990990990
–11222
713303PGKL0130-100030PGKL0140-100010PGKL0150-100010PGKL0160-100010PGKL0170-100010
Requirements of profile system
33a Striker plate PSK 200-Z (for standard locking cams)
RightLeft
A...A... see frame part list page 5.4.1 11...13
34a Striker plate S-ES PSK 200-Z(for mushroom head cams)
A... see frame part list page 5.4.1
435a Striker plate S-RS
(for comfort mushroom head cams)A... see frame part list page 5.4.1
34b Striker plate 56 top crosswise A... see frame part list page 5.4.1 1..2
36-37 Bag frame parts PSK 200-Z
A... see frame part list page 5.4.1 2
Accessories on request38 Cover cap S PKAL0010-... ...025010 ...002010 ...012010 ...030010 2
39 Location piece 702543 0..4
2011-08
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle controlOverview of sets scheme C, variant 1 - basic security
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle controlOverview of sets scheme C, variant 1 - basic security
5.1.20
4/18-94/15-9
2 sliding sashes/2 fixed glazing
Scheme C
1
19 14 15
33a 39
24
39
7
6
11
23
32
33a
39
14
2233a
36
31 9
8
10
2
37
37
363139
█ in carton handle Si-line PSK 200-Z/GH
█ in carton corner drive PSK 200-Z
█ in carton bogie wheels PSK 160/200-Z PLUS
█ in profile set PSK PLUS
█ in bag frame parts PSK 200-Z 34a/35a
33a
33a
33a
33a
38 38
1a 2
WK 1
WK 1
17
12
29
21
16
30
18
13
28 27 261816
18
18
20
191415
33a39
24
11
23
32
33a
39
14
22 34a
319
8a
10a
37
36 3139
34a/35a
33a
33a
33a
33a
3838
34a/35a
WK 1
17
12
29
21
16
30
18
13
28272618 16
18
18
20
53
�� ��
�� ��
31a
34b
Size range
Sash rebate width (mm) 770 to 20001)
1) For sash rebate widths that are < 944 mm, the sash rebate height must not exceed 2.5x the sash rebate width.
Sash rebate height for scheme C (mm) 1460 to 2360
Exterior width of frame (mm)Depends on profile system;
determined by the sash rebate width
Sash weight (kg) max. 200Handle height, constant (mm) 990
37
33a
37
34a/35a
Main sash Secondary sash
5.1.20
2011-08
33a
5.3.20
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle controlFitting diagram scheme C, variant 2a - basic security and WK 1
32
5.1.21 5.1.21
4/18-94/15-9
4/18-94/15-9
Surface TSSurface TS
Fitting diagramPSK PORTAL 200-ZPLUS scheme C, variant 2b – 4 mm airgap
see inside
Item Description
Material number Pc.
Base no.... ... Colour no.
Silver RAL 9003 white
RAL 8022 brown
middle bronze
Scheme CVariant 2a
Requirements of SRH for basic security and WK1
32
Gear OS S-RS(with comfort mushroom head cams)
Size169192215238
SRH (mm)1460 to 16901690 to 19201921 to 21502151 to 2360
Handle position690990990990
1222
PGKL0140-100010PGKL0150-100010PGKL0160-100010PGKL0170-100010
4
Requirements of SRH for basic security and WK1
31a
Linkagescheme C(with pre-installedstriker plates)
Size169/2192 215 238
SRH (mm)1460 to 16901690 to 19201921 to 21502151 to 2360
PZKL0250-100010716366716373716380
1
Linkagescheme C(with pre-installedS-ES striker plates)
Size192 215 238
SRH (mm)1690 to 19201921 to 21502151 to 2360
PZKL0010-100010PZKL0020-100010PZKL0030-100010
Linkagescheme C(with pre-installedS-RS striker plates)
Size169/2192 215 238
SRH (mm)1460 to 16901690 to 19201921 to 21502151 to 2360
PZKL0350-100010PZKL0360-100010PZKL0370-100010PZKL0380-100010
Requirements of profile system for basic security
33a Striker plate PSK 200-Z (for standard locking cams)
RightLeft
A...A...
see frame part list page 5.4.1see frame part list page 5.4.1 8...10
34a Striker plate S-ES PSK 200-Z(for mushroom head cams)
A... see frame part list page 5.4.1
335a Striker plate S-RS
(for comfort mushroom head cams)A... see frame part list page 5.4.1
33ab Striker plate 56 top crosswise A... see frame part list page 5.4.1 3..5
36-37 Bag frame parts PSK 200-Z
A... see frame part list page 5.4.1 2
Requirements of profile system for WK1
33a Striker plate PSK 200-Z (for standard locking cams)
RightLeft
A...A...
see frame part list page 5.4.1see frame part list page 5.4.1 6...8
34a Striker plate S-ES PSK 200-Z(for mushroom head cams)
A... see frame part list page 5.4.1
535a Striker plate S-RS
(for comfort mushroom head cams)A... see frame part list page 5.4.1
34b Striker plate S-ES1)
1) For PSK PORTAL elements right-hand version, use striker plate in right-hand design (RH),for PSK PORTAL elements left-hand version use striker plate in left-hand design (LH).
RightLeft
A...A...
see frame part list page 5.4.1see frame part list page 5.4.1
134b Striker plate S-RS1) Right
LeftA...A...
see frame part list page 5.4.1see frame part list page 5.4.1
33ab Striker plate 56 top crosswise A... see frame part list page 5.4.1 2..4
36-37 Bag frame parts PSK 200-Z
A... see frame part list page 5.4.1 2
Accessories on request
38 Cover cap S PKAL0010-... ...025010 ...002010 ...012010 ...030010 4
39 Location piece 702543 0..7
2011-08
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle controlOverview of sets?scheme C, variant 2a - basic security and WK 1
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle controlOverview of sets?scheme C, variant 2a - basic security and WK 1
Item Description
Material number Pc.Base no.... ... Colour no.
Silver RAL 9003 white RAL 8022 brown middle bronze Scheme C
Variant 2a
Basic requirements for basic security and WK1
1-2Handle PSK200/GH
Right Standard – 296257 296271 297797 296295
1For WK1 Lockable (incl. 1 key 2W145) – 296356 296370 298510 296394
Left Standard – 296301 296325 297803 296349 For WK1 Lockable (incl. 1 key 2W145) – 296400 296424 298527 296448
53 Operating lever PHZL0010-100010 1
6-11
Corner drive PSK 200-Z Right 9 mm groove axis S-ES 2/0 2/4 – PMEL0041-100010
1
9 mm groove axis S-RS 2/0 – 2/4 PMEL0021-10001013 mm groove axis S-ES 2/0 2/4 – PMEL0031-10001013 mm groove axis S-RS 2/0 – 2/4 PMEL0011-100010
Left 9 mm groove axis S-ES 2/0 2/4 – PMEL0042-1000109 mm groove axis S-RS 2/0 – 2/4 PMEL0022-10001013 mm groove axis S-ES 2/0 2/4 – PMEL0032-10001013 mm groove axis S-RS 2/0 – 2/4 PMEL0012-100010
6-11
Corner drive PSK 200-Z Right 9 mm groove axis S-ES 2/0 2/4 – PMEL0081-100010
1
Scheme C1)
1) Contains corner drive PSK 200-Z scheme C: like corner drive PSK 200-Z but with corner drive VSO S-ES scheme C and VSU S-ES scheme C.
9 mm groove axis S-RS 2/0 – 2/4 PMEL0061-10001013 mm groove axis S-ES 2/0 2/4 – PMEL0071-10001013 mm groove axis S-RS 2/0 – 2/4 PMEL0051-100010
Left 9 mm groove axis S-ES 2/0 2/4 – PMEL0082-1000109 mm groove axis S-RS 2/0 – 2/4 PMEL0062-10001013 mm groove axis S-ES 2/0 2/4 – PMEL0072-10001013 mm groove axis S-RS 2/0 – 2/4 PMEL0052-100010
12-15Carton bogie wheels PSK PLUS Right PMKJ0031-100010 1
Left PMKJ0032-100010 1
Required for sash weight > 160 kg for basic security and WK116 Bogie wheels M PSK PLUS Right PLWL0031-100010 42)
2) Required for sash weight > 160 kg, at least one sash width of > 935 mm is required.
Left PLWL0032-100010 42)
Requirements of SRW and EWF for basic security and WK1
17-30 Profile set PSK PLUS
Size 3)
87/200107/240130/286160/346200/426
3) To precisely determine the required size, you must calculate the dimensions of SRW and EWF.
SRW (mm)770 to 870871 to 1070
1071 to 13001301 to 16001601 to 2000
EWF (mm)to 2000
2001 to 24002401 to 28602861 to 34603461 to 4260
PMPJ0100-...PMPJ0110-...PMPJ0120-...PMPJ0130-...PMPJ0140-...
...525010
...525010
...525010
...525010
...525010
...502010
...502010
...502010
...502010
...502010
...512011
...512011
...512011
...512011
...512011
...531011
...531011
...531011
...531011
...531011
24))
4) Symmetrical design; point of separation must be in the centre between the sliding sashes.
Requirements of SRW for basic security and WK1
31
Linkage(with standard locking cams)
Size100123 146 169 169/2192215
SRW (mm)770 to 850851 to 1000
1001 to 12301231 to 14601461 to 16901461 to 16901691 to 19201921 to 2000
loose drive rod and face plate5)
5) Use loose drive rod and face plate from the remnants of the current production.
–1122122
–713914713921713938713945
PZKL0240-100010713952713969
4
Linkage S-ES(with mushroom head cams)
Size100123146169192215
SRW (mm)770 to 850851 to 1000
1001 to 12301231 to 14601461 to 16901691 to 19201921 to 2000
loose drive rod and face plate4) –
112222
–713839713846713853713860713877713884
Linkage S-RS(with comfort mushroom head cams)
Size100123146169192215
SRW (mm)770 to 850851 to 1000
1001 to 12301231 to 14601461 to 16901691 to 19201921 to 2000
loose drive rod and face plate4) –
112222
–PZKL0270-100010PZKL0280-100010PZKL0290-100010PZKL0300-100010PZKL0320-100010PZKL0330-100010
Requirements of SRH for basic security and WK1
32
Gear OS (with standard locking-cams)
Size169192 215 238
SRH (mm)1460 to 16901690 to 19201921 to 21502151 to 2360
Handle position690990990990
1222
713341713815713358713334
4Gear OS S-ES(with mushroom head cams)
Size169192215238
SRH (mm)1460 to 16901690 to 19201921 to 21502151 to 2360
Handle position690990990990
1222
713778713785713792713808
5.1.22
4/18-94/15-9
Main sash Secondary sash
5.3.22
2011-08
2 sliding sashes/2 fixed glazing
Scheme C 19 14 15
33a 39
24
11
23
32
33a
39
14
2233a
36
31 9
8
10
37
3631 39
█ in carton handle Si-line HSK
█ in carton corner drive PSK 200-Z ...
█ in carton bogie wheels PSK 160/200-Z PLUS
█ in profile set PSK PLUS
█ in bag frame parts PSK 200-Z
█ in carton gear set PSK 200-Z
34a/35a
33a
33a
33a
33a
38 38
17
12
29
21
16
30
18
13
28 27 261816
18
18
20
191415
33a39
24
11
23
32
33a
39
14
2233a
34a
319
8a
10a
37
36 3139
34a/35a
33a
33a
33a
33a
3838
17
12
29
21
16
30
18
13
28272618 16
18
18
20
�� ��
�� ��
31a
41 40
45
52
31
51
Size rangeSash rebate width (mm) 770 to 20001)
1) For sash rebate widths that are < 944 mm, the sash rebate height must not exceed 2.5x the sash rebate width.
Sash rebate height for scheme C (mm) 1460 to 2360
Exterior width of frame (mm)depends on profile system;
determined by the sash rebate width
Sash weight (kg) max. 200Handle height, constant (mm) 990
44 42
45
52
4140 51
4442
33a
PSK PORTAL 200-Z PLUSParallel tilt & slide hardware with handle controlFitting diagram scheme C, variant 2b - basic security
Surface TS
5.1.23 5.1.23
4/18-94/15-9
4/18-94/15-9
Surface TS
Fitting diagram
PSK PORTAL 200-ZPLUS scheme A - WK 2 - 4 mm airgap
see inside
Item Description
Material number Pc.
Basic no. .... ... Colour no.
silver RAL 9003 white
RAL 8022 brown middle bronze Scheme C
variant 2b
Requirements of SRH
31
Linkage (with standard locking cams)
Size169/2 192 215 238
SRH (mm)1460 to 1690 1691 to 1920 1921 to 2150 2151 to 2360
Handle position690990990990
1222
PZKL0240-100010713952713969713976
3
Linkage S-ES(with mushroom head cams)
Size192 215 238
SRH (mm)1690 to 1920 1921 to 2150 2151 to 2360
Handle position990990990
222
713877713884713891
Linkage S-RS(with comfort mushroom head cams)
Size169/2 192 215 238
SRH (mm)1460 to 1690 1691 to 1920 1921 to 2150 2151 to 2360
Handle position690990990990
1222
PZKL0310-100010PZKL0320-100010PZKL0330-100010PZKL0340-100010
31a
Linkage scheme C(with pre-installed striker plates)
Size169/2 192 215 238
SRH (mm)1460 to 1690 1691 to 1920 1921 to 2150 2151 to 2360
PZKL0250-100010716366716373716380
1
Linkage scheme C(with pre-installed S-ES striker plates)
Size192 215 238
SRH (mm)1690 to 1920 1921 to 2150 2151 to 2360
PZKL0010-100010PZKL0020-100010PZKL0030-100010
Linkage scheme C(with pre-installed S-RS striker plates)
Size169/2 192 215 238
SRH (mm)1460 to 1690 1691 to 1920 1921 to 2150 2151 to 2360
PZKL0350-100010PZKL0360-100010PZKL0370-100010PZKL0380-100010
Requirements of profile system for basic security
33a Striker plate PSK 200-Z (for standard locking cams)
Right Left
A... A...
See frame part list on page 5.4.1See frame part list on page 5.4.1 8...10
34a Striker plate S-ES PSK 200-Z(for mushroom head cams)
A... see frame part list on page 5.4.1
335a Striker plate S-RS
(for comfort mushroom head cams)A... see frame part list on page 5.4.1
33ab Striker plate 56 top crosswise A... see frame part list on page 5.4.1 3..5
36-37 Bag frame parts PSK 200-Z
A... see frame part list on page 5.4.1 2
Accessories on request38 Cover cap S PKAL0010-... ...025010 ...002010 ...012010 ...030010 439 Location piece 702543 0..6
2011-08
PSK PORTAL 200-Z PLUSParallel tilt & slide hardware with handle controlOverview of sets scheme C, variant 2b - basic security
PSK PORTAL 200-Z PLUSParallel tilt & slide hardware with handle controlOverview of sets scheme C, variant 2b - basic security
Item Description
Material number Pc.
Basic no. .... ... Colour no.
silver RAL 9003 white RAL 8022 brown middle bronze Scheme C
variant 2b
Basic requirements
40..42 Carton handle Si-Line HSK 250
PMHC0010-... ...524010 ...502010 ...512010 ...530010 2
44 Countersunk screw M5x45 863329 445 Sleeve nut 800287 4
51-52 Gear set PSK 200-Z
PZ-30PZ-40PZ-45PZ-50
Backset 30 mm 40 mm 45 mm 50 mm
716335716342716359720691
2
6-11
Corner drive PSK 200-Z Right 9 mm groove axis S-ES 2 2 – PMEL0041-100010
1
9 mm groove axis S-RS 2 – 2 PMEL0021-100010
13 mm groove axis S-ES 2 2 – PMEL0031-100010
13 mm groove axis S-RS 2 – 2 PMEL0011-100010
Left 9 mm groove axis S-ES 2 2 – PMEL0042-100010
9 mm groove axis S-RS 2 – 2 PMEL0022-100010
13 mm groove axis S-ES 2 2 – PMEL0032-100010
13 mm groove axis S-RS 2 – 2 PMEL0012-100010
6-11
Corner drive PSK 200-Z Right 9 mm groove axis S-ES 2 2 – PMEL0081-100010
1
Scheme C1)
1) Contents of corner drive PSK 200-Z scheme C: as corner drive PSK 200-Z but with corner drives VSO S-ES scheme C and VSU S-ES scheme C.Scheme C.
9 mm groove axis S-RS 2 – 2 PMEL0061-100010
13 mm groove axis S-ES 2 2 – PMEL0071-100010
13 mm groove axis S-RS 2 – 2 PMEL0051-100010
Left 9 mm groove axis S-ES 2 2 – PMEL0082-100010
9 mm groove axis S-RS 2 – 2 PMEL0062-100010
13 mm groove axis S-ES 2 2 – PMEL0072-100010
13 mm groove axis S-RS 2 – 2 PMEL0052-100010
12-15Carton bogie wheels PSK PLUS Right PMKJ0031-100010 1
Left PMKJ0032-100010 1
Required for sash weight > 160 kg 16 Bogie wheels M PSK PLUS Right PLWL0031-100010 42)
2) Required for sash weight > 160 kg, at least one sash width of > 935 mm is required.
Left PLWL0032-100010 42)
Requirement acc. to FFB and RAB17-30
Profile set PSK PLUS
Size 3)
87/200 107/240 130/286 160/346 200/426
3) To precisely determine the required size, calculate the dimensions of FFB and RAB.
SRW (mm)770 to 870 871 to 1070
1071 to 1300 1301 to 1600 1601 to 2000
EWF (mm)to 2000
2001 to 2400 2401 to 2860 2861 to 3460 3461 to 4260
PMPJ0100-...PMPJ0110-...PMPJ0120-...PMPJ0130-...PMPJ0140-...
...525010
...525010
...525010
...525010
...525010
...502010
...502010
...502010
...502010
...502010
...512011
...512011
...512011
...512011
...512011
...531011
...531011
...531011
...531011
...531011
24)
4) Symmetrical design; point of separation must be in the centre between the sliding sashes.
Requirements of SRW
31
Linkage(with standard locking cams)
Size 100 123 146 169 169/2 192 215
SRW (mm)770 to 850 851 to 1000
1001 to 1230 1231 to 1460 1461 to 1690 1461 to 1690 1691 to 1920 1921 to 2000
Loose drive rod and face plate5)
5) Use loose drive rod and face plate from offcuts from ongoing production.
–1122122
–713914713921713938713945
PZKL0240-100010713952713969
4
Linkage S-ES(with mushroom head cams)
Size 100 123 146 169 192 215
SRW (mm)770 to 850 851 to 1000
1001 to 1230 1231 to 1460 1461 to 1690 1691 to 1920 1921 to 2000
loose drive rod and face plate4) –
112222
–713839713846713853713860713877713884
Linkage S-RS(with comfort mushroom head cams)
Size 100 123 146 169 192 215
SRW (mm)770 to 850 851 to 1000
1001 to 1230 1231 to 1460 1461 to 1690 1691 to 1920 1921 to 2000
loose drive rod and face plate4) –
112222
–PZKL0270-100010PZKL0280-100010PZKL0290-100010PZKL0300-100010PZKL0320-100010PZKL0330-100010
5.1.24
4/18-9
1a
25 19
20
14 15 34b 24
32
7
6c
34a
34a
11
23
31
14
22
34a17
36
31
98
10
2
36
34a
31
34a
34a
34a
34b
34a
38 38
34a
34a
43
4
4
Size range
SRW (mm) 770 to 20001)
1) For sash rebate widths < 944 mm, the sash rebate heightmust not be greater than 2.5x the sash rebate width.
SRH (mm) 1000 to 2360
EWF (mm) depends on profile system; deter-mined by the SRH
Sash weight (kg) max. 200
5.3.24
4
39
39
39
39
2011-08
█ in carton handle Si-line PSK 200-Z/GH
█ in carton corner drive PSK 200-Z
█ in carton bogie wheels PSK 160/200-Z PLUS
█ in profile set PSK PLUS
█ in bag frame parts PSK 200-Z
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle controlFitting diagram scheme A - WK 2
12
29
21
16
30
18
13
28 27 261816
18
18
Surface TSSurface TS
5.1.25 5.1.25
4/18-9 4/18-9
Fitting diagram
PSK PORTAL 200-ZPLUS scheme C, variant 2a – WK 2 - 4 mm airgap
see inside
Item Description
Material number Quantity for scheme
Base no.... ... Colour no.A G K
Silver RAL 9003 white
RAL 8022 brown middle bronze
Requirements of profile system for WK2
34a
Striker plate S-ES PSK 200-Z(for mushroom head cams)
A... see frame part list page 5.4.15..10
5..10
10..20Striker plate S-RS
(for comfort mushroom head cams)A... see frame part list page 5.4.1
34b
Striker plate S-ES PSK 200-Z(for mushroom head cams)
A... see frame part list page 5.4.11..2 1..2 2..4
Striker plate SL-RS(for comfort mushroom head cams)
A... see frame part list page 5.4.1
36-37 Bag frame parts PSK 200-Z A... see frame part list page 5.4.1 1 1 2
Accessories on request 38 Cover cap S PKAL0010-... ...025010 ...002010 ...012010 ...030010 2 2 4
39 Location piece 702543 0..4 0..4 0..4
2011-08
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle controlOverview of sets scheme A - WK 2
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle controlOverview of sets scheme A - WK 2
Item Description
Material number Quantity for scheme
Base no.... ... Colour no.A G K
Silver RAL 9003 white
RAL 8022 brown middle bronze
Basic requirements for WK2
1-2Handle PSK200/GH Right Lockable (incl. 1 key 2W145) – 296356 296370 298510 296394
1 11
Left Lockable (incl. 1 key 2W145) – 296400 296424 298527 296448 1
6c Coupling bracket WK2 PGZL0040-100010 1 1 2
3Run up block R A0800
A1361 Eurogroove 7/8 x 4Eurofalz 18/8
873670873618
3 3 6
4 Run up block F 873656 3 3 6
Basic requirements
6-11
Corner drive PSK 200-Z Right 9 mm groove axis S-ES 4 PMEL0041-100010
1 11
13 mm groove axis S-ES 4 PMEL0031-100010
Left 9 mm groove axis S-ES 4 PMEL0042-1000101
13 mm groove axis S-ES 4 PMEL0032-100010
12-15Carton bogie wheels PSK PLUS Right PMKJ0031-100010
1 11
Left PMKJ0032-100010 1
Required for sash weight > 160 kg 16 Bogie wheels M PSK PLUS Right PLWL0031-100010
21)
1) Required for sash weight > 160 kg, at least one sash width of > 935 mm is required.
21) 21)
Left PLWL0032-100010 21)
Requirements of SRW and EWF
17-30 Profile set PSK PLUS
Size2)
87/200107/240130/286160/346200/426
2) To precisely determine the required size, you must calculate the dimensions of SRW and EWF.
SRW (mm)770 to 870871 to 1070
1071 to 13001301 to 16001601 to 2000
EWF (mm)to 2000
2001 to 24002401 to 28602861 to 34603461 to 4260
PMPJ0100-...PMPJ0110-...PMPJ0120-...PMPJ0130-...PMPJ0140-...
...525010
...525010
...525010
...525010
...525010
...502010
...502010
...502010
...502010
...502010
...512011
...512011
...512011
...512011
...512011
...531011
...531011
...531011
...531011
...531011
1 1 23)
3) Symmetrical design; point of separation must be in the centre between the sliding sashes.
Requirements of SRW
31
Linkage S-ES(with mushroom head cams)
Size100123146169192215
SRW (mm)770 to 850851 to 1000
1001 to 12301231 to 14601461 to 16901691 to 19201921 to 2000
loose drive rod and face plate4)
4) Use loose drive rod and face plate from the remnants of the current production.
–112222
–713839713846713853713860713877713884
2 2 4Linkage S-RS(with comfort mushroom head cams)
Size100123146169192215
SRW (mm)770 to 850851 to 1000
1001 to 12301231 to 14601461 to 16901691 to 19201921 to 2000
loose drive rod and face plate4) –
112222
–PZKL0270-100010PZKL0280-100010PZKL0290-100010PZKL0300-100010PZKL0320-100010PZKL0330-100010
Requirements of SRH
32
Gear OS S-ES(with mushroom head cams)
Size123146169192215238
SRH (mm)1000 to 12301231 to 14601461 to 16901690 to 19201921 to 21502151 to 2360
Handle position490590690990990990
–11222
713303713761713778713785713792713808
1 1 2Gear OS S-RS(with comfort mushroom head cams)
Size123146169192215238
SRH (mm)1000 to 12301231 to 14601461 to 16901690 to 19201921 to 21502151 to 2360
Handle position490590690990990990
–11222
713303PGKL0130-100030PGKL0140-100010PGKL0150-100010PGKL0160-100010PGKL0170-100010
31
Linkage S-ES(with mushroom head cams)
Size123146169192215238
SRW (mm)1000 to 12301231 to 14601461 to 16901691 to 19201921 to 21502151 to 2360
122222
713846713853713860713877713884713891
1 1 2Linkage S-RS(with comfort mushroom head cams)
Size123146169192215238
SRW (mm)1001 to 12301231 to 14601461 to 16901691 to 19201921 to 20002151 to 2360
122222
PZKL0280-100010PZKL0290-100010PZKL0300-100010PZKL0320-100010PZKL0330-100010PZKL0340-100010
5.1.26
4/18-9
1a
14 15 34a 24
32
7
6c
11
23
31
34c
14
22
17
36
31
98
10
2
3631
34c
34c
34c
3838
34a
34c
19 141525
11
22
31
34c
14
2334c
17
31
98a
10a
36 31
34c
34c
34c
38
34a
53
�� ��
31a
34a
34b
19
34c34c
34a
5
4 4
43
2020
Size rangeSash rebate width (mm) 770 to 20001)
1) For sash rebate widths that are < 944 mm, the sash rebate height must not exceed 2.5x the sash rebate width.
Sash rebate height for scheme C (mm) 1460 to 2360
Exterior width of frame (mm)Depends on profile system;
determined by the sash rebate width
Sash weight (kg) max. 200Handle height, constant (mm) 990
38
5.3.26
2 sliding sashes/2 fixed glazing
Scheme C39
39
39
39
39
39
39
2011-08
█ in carton handle Si-line PSK 200-Z/GH
█ in carton corner drive PSK 200-Z
█ in carton bogie wheels PSK 160/200-Z PLUS
█ in profile set PSK PLUS
█ in bag frame parts PSK 200-Z
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle controlFitting diagram scheme C, variant 2a - WK 2
12
29
21
16
30
18
13
28 27 261816
18
18
12
29
21
16
30
18
13
28272618 16
18
18
Main sash Secondary sash
Surface TS
5.1.27 5.1.27
4/18-9 4/18-9
Surface TS
Item Description
Material number Pc.
Base no.... ... Colour no.
Silver RAL 9003 white
RAL 8022 brown
middle bronze
Scheme CVariant 2a
Requirements of SRH
32
Gear OS S-ES(with mushroom head cams)
Size192215238
SRH (mm)1690 to 19201921 to 21502151 to 2360
Handle position990990990
222
713785713792713808
1Gear OS S-RS(with comfort mushroom head cams)
Size169192215238
SRH (mm)1460 to 16901691 to 19201921 to 21502151 to 2360
Handle position690990990990
1222
PGKL0140-100010PGKL0150-100010PGKL0160-100010PGKL0170-100010
31
Linkage S-ES(with mushroom head cams)
Size169192215238
SRW (mm)1460 to 16901691 to 19201921 to 21502151 to 2360
2222
713860713877713884713891
2Linkage S-RS(with comfort mushroom head cams)
Size169192215238
SRW (mm)1460 to 16901691 to 19201921 to 20002151 to 2360
2222
PZKL0300-100010PZKL0320-100010PZKL0330-100010PZKL0340-100010
31a
LinkageScheme C(with pre-installedstriker plates S-ES)
Size192215238
SRH (mm)1690 to 19201921 to 21502151 to 2360
PZKL0010-100010PZKL0020-100010PZKL0030-100010
1Linkagescheme C(with pre-installedS-RS striker plates)
Size169/2192 215 238
SRH (mm)1460 to 16901691 to 19201921 to 21502151 to 2360
PZKL0350-100010PZKL0360-100010PZKL0370-100010PZKL0380-100010
Requirements of profile system for WK2
34c
Striker plate S-ES PSK 200-Z(for mushroom head cams)
A... see frame part list page 5.4.1
10..13Striker plate S-RS(for comfort mushroom head cams)
A... see frame part list page 5.4.1
34a
Striker plate S-ES PSK 200-Z(for mushroom head cams)
A... see frame part list page 5.4.12..4
Striker plate SL-RS(for comfort mushroom head cams)
A... see frame part list page 5.4.1
34b Striker plate S-ES1)
(for mushroom head cams)
1) For PSK PORTAL elements right-hand version, use striker plate in right-hand design (RH), for PSK PORTAL elements left-hand version use striker plate in left-hand design (LH).
Right A... see frame part list page 5.4.11
Left A... see frame part list page 5.4.10
36, 37 Bag frame parts PSK 200-Z A... see frame part list page 5.4.1 2
Accessories on request
38 Cover cap S PKAL0010-... ...025010 ...002010 ...012010 ...030010 4
39 Location piece 702543 0..7
2011-08
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle controlOverview of sets scheme C, variant 2a - WK 2
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle controlOverview of sets scheme C, variant 2a - WK 2
Item Description
Material number Pc.
Base no.... ... Colour no.
Silver RAL 9003 white RAL 8022 brown middle bronze Scheme C
Variant 2a
Basic requirements for WK2
1-2 Handle PSK200/GH Right Lockable (incl. 1 key 2W145) – 296356 296370 298510 296394 1Left Lockable (incl. 1 key 2W145) – 296400 296424 298527 296448 1
6c Coupling bracket WK2 PGZL0040-100010 1
5 Protection against misalignment PSZL0020-100010 1
3 Run up block R A0800A1361
Eurogroove 7/8 x 4Eurofalz 18/8
873670873618 3
4 Run up block F 873656 3
Basic requirements53 Operating lever PHZL0010-100010 1
6-11
Corner drive PSK 200-Z Right 9 mm groove axis S-ES 4 PMEL0041-100010
113 mm groove axis S-ES 4 PMEL0031-100010
Left 9 mm groove axis S-ES 4 PMEL0042-10001013 mm groove axis S-ES 4 PMEL0032-100010
6-11
Corner drive PSK 200-Z Right 9 mm groove axis S-ES 4 PMEL0081-100010
1Scheme C1)
1) Contains corner drive PSK 200-Z scheme C: like corner drive PSK 200-Z but with corner drive VSO S-ES scheme C and VSU S-ES scheme C.
13 mm groove axis S-ES 4 PMEL0071-100010Left 9 mm groove axis S-ES 4 PMEL0082-100010
13 mm groove axis S-ES 4 PMEL0072-100010
12-15Carton bogie wheels PSK PLUS Right PMKJ0031-100010 1
Left PMKJ0032-100010 1
Required for sash weight > 160 kg16 Bogie wheels M PSK PLUS Right PLWL0031-100010 42)
2) Required for sash weight > 160 kg, at least one sash width of > 935 mm is required.
Left PLWL0032-100010 42)
Requirements of SRW and EWF
17-30 Profile set PSK PLUS
Size3)
87/200107/240130/286160/346200/426
3) To precisely determine the required size, you must calculate the dimensions of SRW and EWF.
SRW (mm)770 to 870871 to 1070
1071 to 13001301 to 16001601 to 2000
EWF (mm)to 2000
2001 to 24002401 to 28602861 to 34603461 to 4260
PMPJ0100-...PMPJ0110-...PMPJ0120-...PMPJ0130-...PMPJ0140-...
...525010
...525010
...525010
...525010
...525010
...502010
...502010
...502010
...502010
...502010
...512011
...512011
...512011
...512011
...512011
...531011
...531011
...531011
...531011
...531011
24)
4) Symmetrical design; point of separation must be in the centre between the sliding sashes.
Requirements of SRW
31
Linkage S-ES(with mushroom head cams)
Size100123146169192215
SRW (mm)770 to 850851 to 1000
1001 to 12301231 to 14601461 to 16901691 to 19201921 to 2000
loose drive rod and face plate5)
5) Use loose drive rod and face plate from the remnants of the current production.
–112222
–713839713846713853713860713877713884
4Linkage S-RS(with comfort mushroom head cams)
Size100123146169192215
SRW (mm)770 to 850851 to 1000
1001 to 12301231 to 14601461 to 16901691 to 19201921 to 2000
loose drive rod and face plate4) –
112222
–PZKL0270-100010PZKL0280-100010PZKL0290-100010PZKL0300-100010PZKL0320-100010PZKL0330-100010
5.1.28
4/18-912/18-9
2011-08
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle controlSpace for notes
5.2.1
Contents Section 5.2PS PORTAL
PS PORTAL Page Parallel sliding hardware
Scheme overview and general information 5.2.2Size ranges 5.2.3
PS PORTAL Timber and PVC elements with 12 mm airgap or cavity
Fitting diagram schemes A, G and K - basic security and WK 1 5.2.4Overview of sets schemes A, G and K - basic security and WK 1 5.2.5Fitting diagram?scheme C, variant 1 - basic security 5.2.6Overview of sets?scheme C, variant 1 - basic security 5.2.7Fitting diagram?scheme C, variant 2 - basic security and WK 1 5.2.8Overview of sets?scheme C, variant 2a - basic security and WK 1 5.2.9Fitting diagram scheme C, variant 2b - basic security 5.2.10Overview of sets scheme C, variant 2b - basic security 5.2.11Fitting diagram scheme A - WK 2 5.2.12Overview of sets?schemes A, G and K - WK 2 5.2.13Fitting diagram scheme C, variant 2a - WK 2 5.2.14Overview of sets scheme C, variant 2a - WK 2 5.2.15
2011-08
PS PORTALParallel sliding fittingScheme overview and general information
5.2.2
160 kg 160 kg
Scheme overview
1) It is also possible to use turning sashes instead of fixed sashes. Turning sashes only with rose Si-Line inside and removable handle.
Note:
You can find profile-related information in the separate frame part list for PSK PORTAL 200-Z PLUS on page 5.4.1
The size ranges given for the PS PORTAL hardware from SIEGENIA-AUBI must not be exceeded.
• For timber elements the standards specified by DIN 68 121 (Timber profiles for windows and window doors) applyProfile cross section IV 68, timber quality and design.
The following is the minimum sash profile cross section:– IV 68/78 for sash rebate dimensions of max. 1500 x 1500 mm – IV 68/92 for larger sash rebate dimensions.
The bottom cross-piece must be installed with an additional connection profile.
• For PVC elements the specifications of the profile manufacturers or system owners also apply, especially with regard to possible restrictions on sash dimensions and/or sash weight.
�������
Scheme A
LH version or RH version
Scheme G
1 sliding sash/2 fixed glazing1)
1 sliding sash/1 fixed glazing1)
2 sliding sashes/2 fixed glazing1)
2 sliding sashes/1 fixed glazing
Scheme C
Scheme K
Scheme C
Various variants possible, see fitting diagrams
page 5.2.6 to 5.2.11 and page 5.2.14 to 5.1.15
2011-08
PS PORTALParallel sliding hardwareSize ranges
5.2.3
160 kg 160 kg
Size ranges
The following size ranges must not be exceeded.Sash rebate width (SRW) (mm) 770 to 20001)
Sash rebate height (SRH) scheme A, G, K, C1 (mm) 1000 to 2360Sash rebate height (SRH) scheme C2a, C2b (mm) 1690 to 2360Exterior width of the frame (EWF) (mm) Depends on profile system; determined by the SRW
for scheme A max. 4260for scheme C max. 8520for scheme G max. 6390for scheme K max. 8520
Sash weight (kg) max. 160Backset gear, lockable from inside (mm) 30, 40, 45 and 50Backset gear, lockable from inside and outside (mm) 30, 40, 45 and 50Handle height constant (mm) 490 - 9902)
Groove axis (mm) 9 and 13Total frame to sash clearance (mm) 1221) For sash rebate widths < 944 mm, the sash rebate height must not be greater than 2.5x the sash rebate width.2) For gear OS (without lock) size 169 - size 238, the handle height can be reduced by 100 mm, SRH is reduced as well
(possible to compensate using linkage size 23).
��
��
����
��
Vertical sections
����
��
��
��
Adjustment options
Height adjustment of the bogie wheels (mm) + 4/- 2SW 8
Sash pressure adjustment (mm) ± 1SW 4/SW11
2011-08
PS PORTALParallel sliding hardware Fitting diagram schemes A, G and K - basic security and WK 1
5.2.4
12/18 - 9
23 17
18
22
19
■ in carton handle Si-line PSK 200-Z/GH
■ in carton bogie wheels PS
■ in profile set PSK 200/160
■ in bag frame parts PSK 200-Z
32
32
1a 2
WK 1
WK 1 WK 1
Size range
SRW (mm) 770 to 20001)
1) For sash rebate widths < 944 mm, the sash rebate heightmust not be greater than 2.5x the sash rebate width.
SRH (mm) 1000 to 2360
EWF (mm) depends on the profile system; de-termined by SRW
(max. 4260 for scheme A)
Sash weight (kg) max. 160
2011-08
1
11
1231 36
31
36
30
4
3
31
32
8
21
9
27
28
10
26 25 24
30
31
31
36
32
11
20
31
15
29
65
7
2
31
13
31
2936
35 3531
31
14
16
5.2.5 5.2.5
PS PORTALParallel sliding hardwareOverview of sets schemes A, G and K - basic security and WK 1
12/18 - 9
PS PORTALParallel sliding hardwareOverview of sets schemes A, G and K - basic security and WK 1
Surface TS Surface TS
12/18 - 9
Fitting diagram
PS PORTAL scheme C variant 1
see inside
Item Description
Material number Quantity for scheme
Silver RAL 9003 white RAL 8022 brown middle bronze A G K
Basic requirements for basic security and WK1
1-2
Carton handle PSK200/GH
Right Standard 296257 296271 297797 296295
1 1
1Lockable for WK1(incl. 1 key 2W145) 296356 296370 298510 296394
Left Standard 296301 296325 297803 296349
1Lockable for WK1(incl. 1 key 2W145) 296400 296424 298527 296448
3-14
Carton PS S-ES Right 9 mm groove axis 2/0 2/4 PMKL0071-100010
1 1
113 mm groove axis 2/0 2/4 PMKL0081-100010
Left 9 mm groove axis 2/0 2/4 PMKL0072-1000101
13 mm groove axis 2/0 2/4 PMKL0082-100010
Requirements of SRW and EWF for basic security and WK1
15-28 Profile set PSK 200/160
Size 1)
87 /200107 /240130 /286160 /346200 /426
1) To precisely determine the required size, you must calculate the dimensions of SRW and EWF.
SRW (mm)770 to 870871 to 1070
1071 to 13001301 to 16001601 to 2000
EWF (mm)to 2000
2001 to 24002401 to 28602861 to 34603461 to 4260
297582297629297667297704297742
297599297636297674297711297759
297612297650297698297735297773
297605297643297681297728297766
1 1 22)
2) Symmetrical design; point of separation must be in the centre between the sliding sashes.
Requirements of SRW for basic security and WK1
29
Linkage(with standard locking cams)
Size100123146169192215
SRW (mm)770 to 1000
1001 to 12301231 to 14601461 to 16901691 to 19201921 to 2000
112222
713914713921713938713945713952713969
2 2 4
Linkage S-ES(with mushroom head cams)
Size100123146169192215
SRW (mm)770 to 1000
1001 to 12301231 to 14601461 to 16901691 to 19201921 to 2000
112222
713839713846713853713860713877713884
Requirements of SRH for basic security and WK1
30
Gear OS(with standard locking cams)
Size123146169192215238
SRH (mm)1000 to 12301231 to 14601461 to 16901690 to 19201921 to 21502151 to 2360
Handle position490590690990990990
-11222
713303713297713341713815713358713334 2 2 4
Gear OS S-ES(with mushroom head cams)
Size146169192215238
SRH (mm)1231 to 14601461 to 16901690 to 19201921 to 21502151 to 2360
Handle position590690990990990
11222
713761713778713785713792713808
Note: Coupling bracket 18/3 for rebate heights 23 - 30 mm see page 5.3.7
Item Description
Material number Quantity for scheme
Silver RAL 9003 white RAL 8022 brown middle bronze A G K
Requirements of profile system for basic security
31 Striker plate 56 (for standard locking cams)
A... Timber see frame part list page 5.4.14..10 4..10 8..20
A... PVC see frame part list page 5.4.1
32Striker plate S-ES PSK 200-Z(for mushroom head cams)
A... Timber see frame part list page 5.4.12 2 4
Striker plate S-ES A... PVC see frame part list page 5.4.1
Requirements of profile system for WK1
31 Striker plate 56 (for standard locking cams)
A... Timber see frame part list page 5.4.12..8 2..8 4..16
A... PVC see frame part list page 5.4.1
32Striker plate S-ES PSK 200-Z(for mushroom head cams)
A... Timber see frame part list page 5.4.14 4 8
Striker plate S-ES A... PVC see frame part list page 5.4.1
Accessories upon request for basic security and WK1
35 Cover cap S PKAL0010-025010 PKAL0010-002010 PKAL0010-012010 PKAL0010-030010 2 2 4
36 Location piece 702543 0..4 0..4 0..4
2011-08
PS PORTALParallel sliding hardwareFitting diagram?scheme C, variant 1 - basic security
5.2.6
12/18-9
1
1112
31 36
36
30
4
3
8
21
9
27
28
10
26 25 24
30
31
31
36
32
11
20
31
15
29
65
7
2
31
13
2936
35 3531
31
14
16
17 22
31
31
32
19
31
18
23
����
����
2 sliding sashes/2 fixed glazing
Scheme C 17
18
19
Size range
Sash rebate width (mm) 770 to 20001)
1) For sash rebate widths < 944 mm, the sash rebate heightmust not be greater than 2.5x the sash rebate width.
Sash rebate height for scheme C (mm) 1000 to 2360
Exterior width of frame (mm)
depends on profile system; determined by the sash rebate
width max. 8520 mm
Sash weight (kg) max. 160
Handle height, constant (mm) 990
Total frame to sash clearance (mm) 122
■ in carton handle Si-line PSK 200-Z/GH
■ in carton PSK 200-Z S-ES
■ in profile set PSK 200/160
■ in bag frame parts PSK 200-Z
5.1.6
2011-08
1
1112
3136
36
30
4
3
8
21
9
27
28
10
262524
30
31
31
36
32
11
20
31
15
29
65
7
2
31
13
29 36
3535 31
31
14
16
Main sash Secondary sash
Surface TSSurface TS
5.2.7 5.2.7
PS PORTALParallel sliding hardwareOverview of sets? scheme C, variant 1 - basic security
12/18 - 9
PS PORTALParallel sliding hardwareOverview of sets? scheme C, variant 1 - basic security
12/18 - 9
Hardware diagram
PS PORTAL scheme C variant 2a
see inside
Item Description
Material number Pc.
silver RAL 9003 white RAL 8022 brown middle bronzeScheme CVariant 1
Basic requirements
1-2
Carton handle PSK200/GH
Right Standard 296257 296271 297797 296295
2
Lockable for WK 1(incl. 1 key 2W145)
296356 296370 298510 296394
Left Standard 296301 296325 297803 296349
Lockable for WK 1(incl. 1 key 2W145)
296400 296424 298527 296448
3-14
Carton PS S-ES Right 9 mm groove axis 2/– 2/– PMKL0071-100010
113 mm groove axis 2/– 2/– PMKL0081-100010
Left 9 mm groove axis 2/– 2/– PMKL0072-100010
13 mm groove axis 2/– 2/– PMKL0082-100010
3-14
Carton PS S-ES scheme C1)
1) Contents of carton PS S-ES scheme C:as carton PS S-ES, but with corner drives VSO S-ES scheme C and VSU S-ES scheme C.
Right 9 mm groove axis 2 2 PMKL0091-100010
113 mm groove axis 2 2 PMKL0101-100010
Left 9 mm groove axis 2 2 PMKL0092-100010
13 mm groove axis 2 2 PMKL0102-100010
Requirement acc. to FFB and RAB
15-28Profile set PSK 200/160
Size2)
87 /200107 /240130 /286160 /346200 /426
2) To precisely determine the required size, calculate the dimensions of FFB and RAB.
FFB (mm)770 to 870871 to 1070
1071 to 13001301 to 16001601 to 2000
RAB (mm)to 2000
2001 to 24002401 to 28602861 to 34603461 to 4260
297582297629297667297704297742
297599297636297674297711297759
297612297650297698297735297773
297605297643297681297728297766
23)
3) Symmetrical design; point of separation must be in the centre between the sliding sashes.
Requirement acc. to FFB
29
Linkage(with standard locking cams)
Size100123146169192215
FFB (mm)770 to 1000
1001 to 12301231 to 14601461 to 16901691 to 19201921 to 2000
112222
713914713921713938713945713952713969
4
Linkage S-ES(with mushroom head cams)
Size100123146169192215
FFB (mm)770 to 1000
1001 to 12301231 to 14601461 to 16901691 to 19201921 to 2000
112222
713839713846713853713860713877713884
Requirement acc. to FFH
30
Gear OS(with standard locking cams)
Size123146169192215238
FFH (mm)1000 to 12301231 to 14601461 to 16901690 to 19201921 to 21502151 to 2360
Handle position490590690990990990
-11222
713303713297713341713815713358713334 4
Gear OS S-ES(with mushroom head cams)
Size146169192215238
FFH (mm)1231 to 14601461 to 16901690 to 19201921 to 21502151 to 2360
Handle position590690990990990
11222
713761713778713785713792713808
Note: Coupling bracket 18/3 for rebate heights 23 - 30 mm see page 5.3.7
Item Description
Material number Pc.
silver RAL 9003 white RAL 8022 brown middle bronzeScheme CVariant 1
Requirement acc. to profile system
31 Striker plate 56 (for standard locking cams)
A... Timber see frame part list on page 5.4.114...18
A... KF see frame part list on page 5.4.1
32Striker plate S-ES PSK 200-Z(for mushroom head cams)
A... Timber see frame part list on page 5.4.14
Striker plate S-ES A... KF see frame part list on page 5.4.1
Accessories as required
35 Cover cap S PKAL0010-025010 PKAL0010-002010 PKAL0010-012010 PKAL0010-030010 4
36 Location piece 702543 0..8
2011-08
PS PORTALParallel sliding hardware Fitting diagram scheme C, variant 2a - basic security and WK 1
5.2.8
12/18-9
1
11
12 31 36
36
30
4
3
8
21
9
27
28
10
26 25 24
30
31
31
36
32
11
20
31
15
29
65
7
2
31
13
2936
35 3531
31
14
16
11
123136
8
21
9
27
28
10
262524
30
31
31
36
32
11
20
31
15
29
6
31
13
29 36
35 31
31
14
16
Main sash Secondary sash
18
22
19
1723
5a
29a
35
50
�� ��
�� ��
29a
32
31
17
18
19
2 sliding sashes/2 fixed glazing
Scheme C
Size range
Sash rebate width (mm) 770 to 20001)
Sash rebate height for scheme C (mm) 1690 to 2360
Exterior width of frame (mm)
depends on profile system; determined by the sash rebate
width max. 8520 mm
Sash weight (kg) max. 160
Handle height, constant (mm) 990
Total frame to sash clearance (mm) 122
1) For sash rebate widths < 944 mm, the sash rebate heightmust not be greater than 2.5x the sash rebate width.
n in carton handle Si-line PSK 200-Z /GH
n in carton PS
n in profile set PSK 200/160
n in bag frame parts PSK 200-Z
1a 2
3232
WK 1 WK 1
WK 1
5.1.8
32aWK 1
2011-08
35
Surface TSSurface TS
5.2.9 5.2.9
PS PORTALParallel sliding hardwareOverview of sets?scheme C, variant 2a - basic security and WK 1
12/18 - 9
PS PORTALParallel sliding hardwareOverview of sets?scheme C, variant 2a - basic security and WK 1
12/18 - 9
Fitting diagram
PS PORTAL scheme C variant 2b
see inside
Item Description
Material number Pc.
Silver RAL 9003 white RAL 8022 brown middle bronze Scheme CVariant 2a
Basic requirements for basic security and WK1
1-2
Carton handle PSK200/GH
Right Standard 296257 296271 297797 296295
1
Lockable for WK1(incl. 1 key 2W145) 296356 296370 298510 296394
Left Standard 296301 296325 297803 296349
Lockable for WK1(incl. 1 key 2W145) 296400 296424 298527 296448
50 Operating lever PHZL0010-100010 1
3-14
Carton PS S-ES Right 9 mm groove axis 2/0 2/4 PMKL0071-100010
113 mm groove axis 2/0 2/4 PMKL0081-100010
Left 9 mm groove axis 2/0 2/4 PMKL0072-100010
13 mm groove axis 2/0 2/4 PMKL0082-100010
3-14
Carton PS S-ES scheme C 1)
1) Contents of carton PS S-ES scheme C:like carton PS S-ES, but with corner drive VSO S-ES scheme C and VSU S-ES scheme C.
Right 9 mm groove axis 2 2 PMKL0091-100010
113 mm groove axis 2 2 PMKL0101-100010
Left 9 mm groove axis 2 2 PMKL0092-100010
13 mm groove axis 2 2 PMKL0102-100010
Requirements of SRW and EWF for basic security and WK1
15-28 Profile set PSK 200/160
Size2)
87/200107/240130/286160/346200/426
2) To precisely determine the required size, you must calculate the dimensions of SRW and EWF.
SRW (mm)770 to 870871 to 1070
1071 to 13001301 to 16001601 to 2000
EWF (mm)to 2000
2001 to 24002401 to 28602861 to 34603461 to 4260
297582297629297667297704297742
297599297636297674297711297759
297612297650297698297735297773
297605297643297681297728297766
23))
3) Symmetrical design; point of separation must be in the centre between the sliding sashes.
Requirements of SRW for basic security and WK1
29
Linkage(with standard locking cams)
Size100123146169 192 215
SRW (mm)770 to 1000
1001 to 12301231 to 14601461 to 16901691 to 19201921 to 2000
112222
713914713921713938713945713952713969
4
Linkage S-ES(with mushroom head cams)
Size100123146169192215
SRW (mm)770 to 1000
1001 to 12301231 to 14601461 to 16901691 to 19201921 to 2000
112222
713839713846713853713860713877713884
Requirements of SRH for basic security and WK1
30
Gear OS (with standard locking cams)
Size169192215238
SRH (mm)1460 to 16901690 to 19201921 to 21502151 to 2360
Handle position690990990990
222
713341713815713358713334
3
Gear OS S-ES(with mushroom head cams)
Size169192215238
SRH (mm)1460 to 16901690 to 19201921 to 21502151 to 2360
Handle position690990990990
222
713778713785713792713808
29aLinkage scheme C(with pre-installed striker plates)
Size169/2192215238
SRH (mm)1460 to 16901690 to 19201921 to 21502151 to 2360
PZKL0250-100010716366716373716380
1
Note: Coupling bracket 18/3 for rebate heights 23 - 30 mm see page 5.3.7
Item Description
Material number Pc.
Silver RAL 9003 white RAL 8022 brown middle bronze Scheme CVariant 2a
Requirements of profile system for basic security
31 Striker plate 56 A... Timber see frame part list page 5.4.111...15
A... PVC see frame part list page 5.4.1
32Striker plate S-ES PSK 200-Z A... Timber see frame part list page 5.4.1
3Striker plate S-ES A... PVC see frame part list page 5.4.1
Requirements of profile system for WK1
31 Striker plate 56 A... Timber see frame part list page 5.4.18...12
A... PVC see frame part list page 5.4.1
32Striker plate S-ES PSK 200-Z A... Timber see frame part list page 5.4.1
5Striker plate S-ES A... PVC see frame part list page 5.4.1
32a
Striker plate S-ES1)
1) For PSK PORTAL elements right-hand version, use striker plate in right-hand design (RH),for PSK PORTAL elements left-hand version use striker plate in left-hand design (LH).
RightLeft
A...A... Timber see frame part list page 5.4.1
1A... PVC see frame part list page 5.4.1
Striker plate 56 A... Timber see frame part list page 5.4.1
A... PVC see frame part list page 5.4.1
Accessories as required
35 Cover cap S PKAL0010-025010 PKAL0010-002010 PKAL0010-012010 PKAL0010-030010 4
36 Location piece 702543 0..4
2011-08
PS PORTALParallel sliding hardwareFitting diagram scheme C, variant 2b - basic security
5.2.10
12/18-9
11
12 31 36
36
29
8
21
9
27
28
10
26 25 24
30
31
31
36
32
11
20
31
15
29
65
7
31
13
2936
35 3531
31
14
16
11
123136
8
21
9
27
28
10
262524
30
31
31
36
32
11
20
31
15
29
6
31
13
29 36
35 31
31
14
16
Main sash Secondary sash
18
22
19
1723
5a
7a
35
�� ��
�� ��
29a
32
31
17
18
19
2 sliding sashes/2 fixed glazing
Scheme C
38
41 39
37
38
4139
4242
49 49
48
48
Size range
Sash rebate width (mm) 770 to 20001)
1) For sash rebate widths < 944 mm, the sash rebate heightmust not be greater than 2.5x the sash rebate width.
Sash rebate height for scheme C (mm) 1690 to 2360
Exterior width of frame (mm)
depends on profile system; determined by the sash rebate
width max. 8520 mm
Sash weight (kg) max. 160
Handle height, constant (mm) 990
Total frame to sash clearance (mm) 122
n in carton handle Si-line HSK
n in carton PS
n in profile set PSK 200/160
n in bag frame parts PSK 200-Zn in carton gear set PSK 200-Z
5.1.10
2011-08
37
Surface TSSurface TS
5.2.11 5.2.11
PS PORTALParallel sliding hardwareOverview of sets scheme C, variant 2b - basic security
12/18 - 9
PS PORTALParallel sliding fittingOverview of sets scheme C, variant 2b - basic security
12/18 - 9
Fitting diagram
PS PORTAL scheme A WK2
see inside
Item Description
Material number Pc.
Silver RAL 9003 white RAL 8022 brown middle bronze Scheme C,variant 2b
Basic requirements
37..39 Carton handle Si-Line HSK 250 PMHC0010-524011 PMHC0010-502011 PMHC0010-512011 PMHC0010-530011 2
41 Countersunk screw M5x45 863329 4
42 Sleeve nut 800287 4
48-49 Gear set PSK 200-Z
PZ-30PZ-40PZ-45PZ-50
Backset 30 mm40 mm45 mm50 mm
716335716342716359720691
2
3-14
Carton PS S-ES Right 9 mm groove axis 2/– 2/– PMKL0071-100010
113 mm groove axis 2/– 2/– PMKL0081-100010
Left 9 mm groove axis 2/– 2/– PMKL0072-100010
13 mm groove axis 2/– 2/– PMKL0082-100010
3-14
Carton PS S-ES scheme C 1)
1) Contents of carton PS S-ES scheme C:like carton PS S-ES, but with corner drive VSO S-ES scheme C and VSU S-ES scheme C.
Right 9 mm groove axis 2 2 PMKL0091-100010
113 mm groove axis 2 2 PMKL0101-100010
Left 9 mm groove axis 2 2 PMKL0092-100010
13 mm groove axis 2 2 PMKL0102-100010
Requirements of SRW and EWF
15-28Profile set PSK 200/160
Size2)
87/200107/240130/286160/346200/426
2) To precisely determine the required size, you must calculate the dimensions of SRW and EWF.
SRW (mm)770 to 870871 to 1070
1071 to 13001301 to 16001601 to 2000
EWF (mm)to 2000
2001 to 24002401 to 28602861 to 34603461 to 4260
297582297629297667297704297742
297599297636297674297711297759
297612297650297698297735297773
297605297643297681297728297766
23)
3) Symmetrical design; point of separation must be in the centre between the sliding sashes.
Requirements of SRW
29
Linkage(with standard locking cams)
Size100123146169192215
SRW (mm)770 to 1000
1231 to 14601461 to 16901691 to 19201921 to 2000
112222
713914713921713938713945713952713969
4
Linkage S-ES(with mushroom head cams)
Size100123146169192215
SRW (mm)770 to 1000
1001 to 12301231 to 14601461 to 16901691 to 19201921 to 2000
112222
713839713846713853713860713877713884
Requirements of SRH
29Linkage(with standard locking cams)
Size169/2192215238
SRH (mm)1460 to 16901690 to 19201921 to 21502151 to 2360
Handle position790990990990
1222
PZKL0240-100010713952713969713976
3
29a LinkageScheme C(with pre-installedstriker plates)
Size169/2192215238
SRH (mm)1460 to 16901690 to 19201921 to 21502151 to 2360
Handle position790990990990
PZKL0250-100010716366716373716380
1
Item Description
Material number Pc.
Silver RAL 9003 white RAL 8022 brown middle bronze Scheme C,variant 2b
Requirements of profile system
31 Striker plate 56 A... Timber see frame part list page 5.4.111...15
A... PVC see frame part list page 5.4.1
32Striker plate S-ES PSK 200-Z A... Timber see frame part list page 5.4.1
3Striker plate S-ES A... PVC see frame part list page 5.4.1
Accessories as required
35 Cover cap S PKAL0010-025010 PKAL0010-002010 PKAL0010-012010 PKAL0010-030010 2
36 Location piece 702543 0..4
2011-08
PS PORTALParallel sliding hardware Fitting diagram scheme A - WK 2
5.2.12
12/18-9
1314
5.1.12
2011-08
1a
23 17
18
11 12 32 22
30
4
32
32
8
21
9
27
19
10
26 25 24
29
11
20
3215
29
65
7
2
34 34
32
29
32
32
32
32
32
16
35 35
32
32
5453
54
53
53
54
Size range
SRW (mm) 770 to 20001)
1) For sash rebate widths < 944 mm, the sash rebate heightmust not be greater than 2.5x the sash rebate width.
SRH (mm) 1000 to 2360
EWF (mm) depends on the profile system; de-termined by SRW
(max. 4260 for scheme A)
Sash weight (kg) max. 160
n in carton handle Si-line PSK 200-Z /GH
n in carton PS
n in profile set PSK 200/160
n in bag frame parts PSK 200-Z
3a
36
36
36
36
28
Surface TS
5.2.13 5.2.13
12/18 - 9
PS PORTALParallel sliding hardwareOverview of sets?schemes A, G and K - WK 2
PS PORTALParallel sliding hardwareOverview of sets?schemes A, G and K - WK 2
Surface TS
12/18 - 9
Fitting diagram
PS PORTAL scheme C variant 2a WK 2
see inside
Item Description
Material number Quantity for scheme
Silver RAL 9003 white RAL 8022 brown middle bronze A G K
Basic requirements for WK2
1-2
Carton handle PSK200/GH
Right Lockable(incl. 1 key 2W145) 296356 296370 298510 296394
1 1
1
Left Lockable (incl. 1 key 2W145) 296400 296424 298527 296448 1
3a Coupling bracket WK2 PGZL0040-100010 1 1 2
53 Run up block R A0800A1361
Eurogroove 7/8 x 4Eurofalz 18/8
873670873618 3 3 6
54 Run up block F 873656 3 3 6
Basic requirements
3-14
Carton PS S-ES Right 9 mm groove axis 4 PMKL0071-100010
1 1
113 mm groove axis 4 PMKL0081-100010
Left 9 mm groove axis 4 PMKL0072-1000101
13 mm groove axis 4 PMKL0082-100010
Requirements of SRW and EWF
15-28 Profile set PSK 200/160
Size 1)
87 /200107 /240130 /286160 /346200 /426
1) To precisely determine the required size, calculate the dimensions of SRW and EWF
SRW (mm)770 to 870871 to 1070
1071 to 13001301 to 16001601 to 2000
EWF (mm)to 2000
2001 to 24002401 to 28602861 to 34603461 to 4260
297582297629297667297704297742
297599297636297674297711297759
297612297650297698297735297773
297605297643297681297728297766
1 1 22)
2) Symmetrical design; point of separation must be in the centre between the sliding sashes.
Requirements of SRW
29
Linkage S-ES(with mushroom head cams)
Size100123146169192215
SRW (mm)770 to 1000
1001 to 12301231 to 14601461 to 16901691 to 19201921 to 2000
112222
713839713846713853713860713877713884
2 2 4
Requirements of SRH
30
Gear OS S-ES(with mushroom head cams)
Size123146169192215238
SRH (mm)1000 to 12301231 to 14601461 to 16901690 to 19201921 to 21502151 to 2360
Handle position490590690990990990
-11222
713303713761713778713785713792713808
2 2 4
Item Description
Material number Quantity for scheme
Silver RAL 9003white RAL 8022 brown middle bronze A G K
Requirements of profile system for WK2
32Striker plate S-ES PSK 200-Z A... see frame part list page 5.4.1
6..12 6..12 12..24Striker plate S-ES A... PVC see frame part list page 5.4.1
34Distance piece(bag contains 10 pieces)
A... see frame part list page 5.4.11 1 1
A... PVC see frame part list page 5.4.1
Accessories on request
35 Cover cap S PKAL0010-025010 PKAL0010-002010 PKAL0010-012010 PKAL0010-030010 2 2 4
36 Location piece 702543 0..4 0..4 0..4
2011-08
PS PORTALParallel sliding hardware Fitting diagram scheme C, variant 2a - WK 2
5.2.14
12/18-9
28
1314
28
13 14
1a
11 12 32
36
22
36
30
4
3a
8
21
9
27
19
10
26 25 24
30
32
36
11
20
15
29
65
7
2
34
29 36
32
32
32
35 35
16
32
32
17 1112
36
23
8
20
9
27
10
262524
30
32
36
11
2132 15
29
65a
7a
34
2936
32
32
32
3535
16
32
Main sash Secondary sash
50
�� ��
29a
32
32a
17
19
3232
32
55
53
54 54
53
5453
1818
2 sliding sashes/2 fixed glazing
Scheme C
Size range
Sash rebate width (mm) 770 to 20001)
1) For sash rebate widths < 944 mm, the sash rebate heightmust not be greater than 2.5x the sash rebate width.
Sash rebate height for scheme C (mm) 1690 to 2360
Exterior width of frame (mm)
depends on profile system; determined by the sash rebate
width max. 8520 mm
Sash weight (kg) max. 200
Handle height, constant (mm) 990
Total frame to sash clearance (mm) 122
n in carton handle Si-line PSK 200-Z /GH
n in carton PS
n in profile set PSK 200/160
n in bag frame parts PSK 200-Z
5.1.14
2011-08
Surface TSSurface TS
5.2.15 5.2.15
PS PORTALParallel sliding hardwareOverview of sets scheme C, variant 2a - WK 2
12/18 - 9
PS PORTALParallel sliding hardwareOverview of sets scheme C, variant 2a - WK 2
12/18 - 9
Fitting diagram
PSK PORTAL 200-Z scheme A 4 mm airgap
see inside
Item Description
Material number Pc.
Silver RAL 9003white RAL 8022 brown middle bronze Scheme C
Variant 2a
Basic requirements for WK2
1-2
Carton handle PSK200/GH Right Lockable(incl. 1 key 2W145) 296356 296370 298510 296394 1
Left Lockable(incl. 1 key 2W145) 296400 296424 298527 296448 1
3a Coupling bracket WK2 PGZL0040-100010 1
55 Protection against misalignment PSZL0020-100010 1
53 Run up block R A0800A1361
Eurogroove 7/8 x 4Eurofalz 18/8
873670873618 3
54 Run up block F 873656 3
Basic requirements
50 Operating lever PHZL0010-100010 1
3-14
Carton PS S-ES Right 9 mm groove axis 4 PMKL0071-100010
113 mm groove axis 4 PMKL0081-100010
Left 9 mm groove axis 4 PMKL0072-100010
13 mm groove axis 4 PMKL0082-100010
3-14
Carton PS S-ES scheme C 1)
1) Contents of carton PS S-ES scheme C:like carton PS S-ES, but with corner drive VSO S-ES scheme C and VSU S-ES scheme C.
Right 9 mm groove axis 2 PMKL0091-100010
113 mm groove axis 2 PMKL0101-100010
Left 9 mm groove axis 2 PMKL0092-100010
13 mm groove axis 2 PMKL0102-100010
Requirements of SRW and EWF
15-28 Profile set PSK 200/160
Size2)
87/200107/240130/286160/346200/426
2) To precisely determine the required size, you must calculate the dimensions of SRW and EWF.
SRW (mm)770 to 870871 to 1070
1071 to 13001301 to 16001601 to 2000
EWF (mm)to 2000
2001 to 24002401 to 28602861 to 34603461 to 4260
297582297629297667297704297742
297599297636297674297711297759
297612297650297698297735297773
297605297643297681297728297766
23)
3) Symmetrical design; point of separation must be in the centre between the sliding sashes.
Requirements of SRW
29
Linkage S-ES(with mushroom head cams)
Size100123146169192215
SRW (mm)770 to 1000
1001 to 12301231 to 14601461 to 16901691 to 19201921 to 2000
112222
713839713846713853713860713877713884
4
Requirements of SRH
30
Gear OS S-ES(with mushroom head cams)
Size192215238
SRH (mm)1690 to 19201921 to 21502151 to 2360
Handle position990990990
222
713785713792713808
3
29a Linkage S-ESScheme C(with pre-installedstriker plates S-ES)
Size192215238
SRH (mm)1690 to 19201921 to 21502151 to 2360
PZKL0010-100010PZKL0020-100010PZKL0030-100010
1
Item Description
Material number Pc.
Silver RAL 9003 white RAL 8022 brown middle bronze Scheme C
Variant 2a
Requirements of profile system for WK2
32Striker plate S-ES PSK 200-Z A... see frame part list page 5.4.1
13..17Striker plate S-ES A... PVC see frame part list page 5.4.1
32aStriker plate S-ES1)
1) For PSK PORTAL elements right-hand version, use striker plate in right-hand design (RH),for PSK PORTAL elements left-hand version use striker plate in left-hand design (LH).
RightLeft
A...A... see frame part list page 5.4.1
1A....... PVC see frame part list page 5.4.1
34Distance piece(bag contains 10 pieces)
A... see frame part list page 5.4.11
A....... PVC see frame part list page 5.4.1
Accessories as required
35 Cover cap S PKAL0010-025010 PKAL0010-002010 PKAL0010-012010 PKAL0010-030010 4
36 Location piece 702543 0..4
2011-08
PS PORTALParallel sliding hardware Space for notes
5.2.16
12/18-9
2011-08
5.3.1
Contents Section 5.3PSK PORTAL 200-Z PLUS Accessories
PSK PORTAL 200-ZPLUS Page
Accessories
PSK 200-Z PZ, inside 5.3.2PSK 200-Z PZ, inside and outside 5.3.3Handle Si-line PSK 200-Z/GH, lockableHandle Si-line, removable 5.3.4Linkage size 23 MVLinkage UE size 23 MVLinkage S-ES size 23 MV 5.3.5Stock lengths of:Guiding rail PSKCover rail F PSKCover rail L PSK PLUSRunning rail PSK PLUSCover rail KBag cover caps - PSK 100 PLUSBag cover caps set PSK PLUSBag accessories running rail: PSK PLUSSupporting piece LCover cap KSupporting piece K 5.3.6Coupling bracket 15Coupling bracket 18Coupling bracket 18/2Coupling bracket 18/3Coupling bracket WK 2 5.3.7
PSK PORTAL 200-ZPLUS Jigs
Jigs Basic equipment Combi jig EB 643-3/-7 5.3.8Jigs Additional jigs 1 5.3.9Jigs Additional jigs 2 5.3.10
2011-08
PSK PORTAL PLUSParallel tilt & slide hardware with handle control
Accessories handle and gear setItem Description
Material number
Silver RAL 9003white
RAL 8022brown
Middlebronze
40-42 Carton handle Si-Line HSK 250 PMHC0010-524010 PMHC0010-502010 PMHC0010-512010 PMHC0010-530010
43 Cover cap Si-line HS 300 PZ PKHB0040-524010 PKHB0040-502010 PKHB0040-512010 PKHB0040-530010
44 Countersunk screw M 5x 40(quantity of 2) 211076
45 Sleeve nut (quantity of 2) 800287
51, 52 Gear set PSK 200-Z PZ-30 Backset 30 mm 716335
PZ-40 40 mm 716342
PZ-45 45 mm 716359
PZ-50 50 mm 720691
Linkage Linkage S-ES Linkage S-RS
(with standard locking cams) (with mushroom head cams)(with comfort mushroom head
cams)
31Size
Linkage 1) size 169/2SRH (mm)
1460 – 1690
Handle position
690 1 PZKL0240-100010 – PZKL0310-100010
Sz. 192 1691 – 1920 990 2 713952 713877 PZKL0320-100010
Sz. 215 1921 – 2150 990 2 713969 713884 PZKL0330-100010
PSK 200-Z PZ, inside
– In conjunction with gear set PSK 200-Z PZ-30, 40, 45 and 50 Suitable for standard half cylinders
– With handle Si-line HSK, inside
51
43
40
31
52
41
50
45
��
��
��
��
5.3.2 2011-08
PSK PORTAL PLUSParallel tilt & slide hardware with handle control
AccessoriesSz. 238 2151 – 2360 990 2 713976 713891 PZKL0340-100010
1) Instead of gear OS on the gear side
Item Description
Material number
Silver RAL 9003white
RAL 8022brown
Middlebronze
5.3.2
PSK PORTAL PLUSParallel tilt & slide hardware with handle control
Accessories handle and gear setItem DescriptionMaterial number
Silver RAL 9003white
RAL 8022brown
Middlebronze
46, 41, 43 Carton handle Si-line HSK 250/PSK 200-Z PZ inside PMHC0020-524011 PMHC0020-502011 PMHC0020-512011 PMHC0020-530011
47 Handle Si-line PSK 200-Z PZ, outside flat PHAL0010-524010 PHAL0010-502010 PHAL0010-512010 PHAL0010-530010
48, 49, 43 Carton handle Si-line HS 300 PZ, outside raised PMHB0040-524011 PMHB0040-502011 PMHB0040-512011 PMHB0040-530011
50 Countersunk screw M 5x 65(quantity of 2) For sash thicknesses 55 – 64 mm KDNA0080-100010
Countersunk screw M 5x 75(quantity of 2) 65 – 74 mm KDNA0100-100010
Countersunk screw M 5x 85(quantity of 2) 75 – 84 mm KDNA0120-100010
51, 52 Gear set PSK 200-ZPZ-30 Backset 30 mm 716335
PZ-40 40 mm 716342
PZ-45 45 mm 716359
PZ-50 50 mm 720691
Linkage Linkage S-ES Linkage S-RS
(with standard locking cams) (with mushroom head cams)(with comfort mushroom head
cams)
31SizeLinkage 1)size 169/2
SRH (mm)1460 – 1690
Handle posi-tion690 1 PZKL0240-100010 – PZKL0310-100010
Sz. 192 1691 – 1920 990 2 713952 713877 PZKL0320-100010
PSK 200-Z PZ, inside and outside
– In conjunction with gear set PSK 200-Z PZ-30, 40, 45 and 50 Suitable for standard profile cylinders
– Handle inside and outside. – Outside handle raised or flat– Square spindle with pre-determined breaking
point for anti-intruder protection
51
48
47
51
43
46
31 41
52 52
50
31
50
43
4141
49
43
������� �������
��
���
��
��
��
�����
��
����
��
������� �������
��
���
��
��
��
�����
��
����
��
��
5.3.32011-08
PSK PORTAL PLUSParallel tilt & slide hardware with handle control
Accessories handle and gear setSz. 215 1921 – 2150 990 2 713969 713884 PZKL0330-100010
Sz. 238 2151 – 2360 990 2 713976 713891 PZKL0340-100010
1) Instead of gear OS on the gear side
Item DescriptionMaterial number
Silver RAL 9003white
RAL 8022brown
Middlebronze
5.3.3
5.3.4
PSK PORTAL PLUSParallel tilt & slide hardware with handle controlAccessories handle lockable
Item DescriptionMaterial number
silver RAL 9003white
RAL 8022brown
middlebronze
1a, 2Handle Si-line PSK 200-Z/GH, lockable Right 296356 296370 298510 296394
incl. 1 key 2W 145 Left 296400 296424 298527 296448
Handle Si-line PSK 200-Z/GH, lockable– precise locking in locking, tilt and slide variants– including 1 key 2W 145 (material number 892510)– with integrated anti-drilling protection
1a
2
2011-08
5.3.5
PSK PORTAL PLUSParallel tilt & slide hardware with handle controlAccessories linkage
Item Description Material number
1 Linkage size 23 MVfor max. SRH at handle height 890 mm 713907
2
Linkage S-ES size 23 MVfor max. SRH at handle height 890 mm 713822
Linkage S-RS size 23 MVfor max. SRH at handle height 890 mm PZKL0260-100010
3 Linkage UE size 23 MV for electronic monitoring of locking and opening(magnetic switch required) 716519
���
���
Linkage size 23 MV
– For max. sash rebate height with handle height reduced by 100 mm and as additional centre lock
– Can be combined with gear PSK-Z and linkages PSK-Z (horizontal and vertical installation possible), observe the max. size range.
– Striker plate position is marked on the cover rail
Linkage UE size 23 MV– for electronic monitoring of locking and opening
(magnetic switch required, see AEROCONTROLtechnical portfolio)
���
Linkage S-ES size 23 MV
Linkage S-RS size 23 MV
– For max. sash rebate height with handle height reduced by 100 mm and as additional centre lock
– Can be combined with gear PSK-Z and linkages PSK-Z (horizontal and vertical installation possible), observe the max. size range.
– Striker plate position is marked on the cover rail1 2
3
2011-08
5.3.6
PSK PORTAL PLUSParallel tilt & slide hardware with handle controlAccessories rails in stock lengths
Item DescriptionMaterial number
Silver RAL 9001white
RAL 9003white
RAL 8022brown
F9steel colours middle bronze
Rails
1 Guiding rail PSKSize
586Length (mm)
5865 PPFJ0010-524... PPFJ0010-524...1)
1) Silver anodised
PPFJ0010-524...1) PPFJ0010-524...1) PPFJ0010-524...1) PPFJ0010-524...1)
2 cover rail F PSK 586 5865 PPAJ0190-025... PPAJ0190-001... PPAJ0190-002... PPAJ0190-012... PPAJ0190-0H4... PPAJ0190-030...
22 Cover rail L PSK PLUS 573 5730 PPAJ0180-525... PPAJ0180-501... PPAJ0180-502... PPAJ0180-512... PPAJ0180-5H4... PPAJ0180-531...
23 Running rail PSK PLUS 586 5865 PPLJ0180-524... PPLJ0180-524...1) PPLJ0180-524...1) PPLJ0180-532...2)
2) Dark bronze anodized
PPLJ0180-524...1) PPLJ0180-530...
Required accessories
20 Connecting rod PSKSize
335Length (mm)
2750 PVSE0050-100...
9 -12 Bag cover caps set PSK PLUS PMAJ0050-025... PMAJ0050-001... PMAJ0050-002... PMAJ0050-012... PMAJ0050-0H4... PMAJ0050-031...
16 - 19 Bag accessories running rail: PSK PLUS PMZJ0050-100... PMZJ0050-100...3)
3) Colour silver
PMZJ0050-100...4) PMZJ0050-012... PMZJ0050-0H4... PMZJ0050-031...
21 Supporting piece L PZLJ0010-099...4)
4) Colour black
1211
10
2
1
22
23
20
9
16
17
21
18 19
PSK PORTAL 200-ZPLUS PSK PORTAL 200-ZPLUS
Rails in stock lengths
– For blank optimisation– Material numbers are displayed in shortened form. Complete material numbers depend on available packaging unit.
2011-08
5.3.7
PSK PORTAL PLUSParallel tilt & slide hardware with handle controlAccessories coupling bracket
2011-08
Coupling bracket 15– For timber elements with 4 mm airgap
Groove axis 9 mm Groove axis 13 mm
Rebate height (mm)1)
1) Rebate thickness + seal
15 to 22 mm 15 to 18 mm
Coupling bracket 18– for 9 mm groove axis
Groove axis 9 mm
Rebate height (mm)1) 15 to 22 mm
Coupling bracket 18/2– for 13 mm groove axis
Groove axis 13 mm
Rebate height (mm)1) 17 to 24 mm
Coupling bracket 18/3– for energy-saving window systems with rebate heights of 23 - 34 mm
Groove axis 9 mm Groove axis 13 mm
Rebate height (mm)1) 27 to 34 mm 23 to 30 mm
Coupling bracket WK 2– For window elements according to WK2
Groove axis 9 mm Groove axis 13 mm
Rebate height (mm)1) 27 to 34 mm 23 to 30 mm
Item Description Material number
6
Coupling bracket 15 717240
Coupling bracket 18 643.2146.0003X60
Coupling bracket 18/2 720585
Coupling bracket 18/3 PGZL0050-100010
6c Coupling bracket WK 2 PGZL0040-100010
Coupling bracket 15– For timber elements with 4 mm airgap
Coupling bracket 18– for 9 mm groove axis (corner drive included in scope of delivery)
Coupling bracket 18/2– for 13 mm groove axis (corner drive included in scope of delivery)
Coupling bracket 18/3– for energy-saving window systems with rebate heights of 23 - 34 mm
Coupling bracket WK 2– For window elements according to WK2
6
������������� �����
��
������������� ���
��
������������� �����
��
������������� �����
��
������������� ���
��
6c
5.3.8
PSK PORTAL PLUSParallel tilt & slide fitting with handle controlJigs
Description Tool Material number
Basic equipment
Combi jig EB 643-3/-7
Drill holes for handle for drive gear, milling grooves for corner drive VSO and BSO for nut axis 9 mm (timber and PVC) and 13 mm (PVC only)
Cutter: Ø 6 or 8 mmThrust ring: Ø 27 mmDrill: Ø 4.2 mm
158036
Combi jig EB 643-3/-7-13Drill holes for handle for drive gear, milling grooves for corner drive VSO and BSO for nut axis 13 mm (timber)
Cutter: Ø 6 or 8 mmThrust ring: Ø 27 mmDrill: Ø 4.2 mm
PALL0020-5H9011
Combi jig EB 643-4/-7-13 C35Drill holes for handle for drive gear, milling grooves for corner drive VSO and BSO for nut axis 13 mm (timber)
Cutter: Ø 6 or 8 mmThrust ring: Ø 27 mmDrill: Ø 4.2 mm
PALL0030-5H9011
and sash rebate thickness > 20 mm
2011-08
PSK PORTAL PLUSParallel tilt & slide hardware with handle controlJigs
5.3.9
Description Tool Material number
Additional jigs 1
Jig 643-2 PSK200 locking part
for locking part 158029
Clamping jig PSK PLUS Guiding and running rail
for guiding and running rail PALJ0010-021010
Minimum requirement - quantity of 3
Jig PSK EB 640/4 for drill centring on guiding and running rails
Drill: Ø 3.5 mm 143001
Jig 643-6 PSK200 bogie wheels for bogie wheels and supporting pieces Drill: Ø 4.2 mm 158012
Jig AL 643-2 universally applicable for striker plate 56 mm and S-ES
158043
Jig 643-3 PSK200 gears for gear set PSK 200-Z PZ-.. 158302
universally applicable for backset 30, 40 and 45
Adjustment rod EB 650-3 not shown
for combi jig EB 643-3/7 andjig EB 643-3
157244
Combi jignot shown
for system 4/15-9 on request
2011-08
5.3.10
PSK PORTAL PLUSParallel tilt & slide hardware with handle controlJigs
Description Tool Material number
Additional jigs 2
Striker jig EL 643-2timber - VS
for striker plates and distance pieces on the locking side
PAEL0010-524010
Size range: SRH 1691 to 2360
Striker jig EL 643-2timber - BS
for striker plates and distance pieces on the hinge side
PAEL0020-524010
Size range: SRH 1691 to 2360
Striker jig EL 643-2timber and PVC
for striker plates and locking piecestop and bottom crosswise
PAEL4000-524010
Size range: SRW 770 to 2360
Striker jig EL 643-2PVC
for striker plates and distance pieces on the locking and hinge side
PAEL4010-524010
Size range: SRH 1691 to 2360
1 2 3 4 1
2
3
4
2011-08
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle control
Frame part list 1Profile manufacturer
Profile/system Frame Sashes Design Striker plate 56 Design Striker plate S-ES Design Striker plate S-RS Design Bag frame parts Design Distance piecesCoupling bracket
for standard locking cams for mushroom head camsfor comfort mushroom head
camsLocking & distance pieces
Bag quantity of 10 distance pieces
Aluplast Ideal-2000 120403 120423 A1900 FRSB0560-100010 A2040 703656 A2040 TRSK0160-100010 A2040 714898 A2040 301296 18/2Ideal-4000 140403 140425 A1900 FRSB0560-100010 A2400 704028 A2400 TRSK0520-100010 A2400 714904 A2400 301302 18/2Ideal-5000 150404 150425 A1900 FRSB0560-100010 A2400 704028 A2400 TRSK0520-100010 A2400 714904 A2400 301302 18/2Ideal-6000 160403 150425 A1900 FRSB0560-100010 A2400 704028 A2400 TRSK0520-100010 A2400 714904 A2400 301302 18/2Energeto 8000 160003 160025 A1900 FRSB0560-100010 A2400 704028 A2400 TRSK0520-100010 A2400 714904 A2400 301302 18/2
Deceuninck Zendow 3001 3042 A4580 FRSB0080-100010 A1940 703687 – – A1940 714836 A1940 301234 18/2Gealan S3000 3011 3091 A1940 FRSB0390-100010 A1940 TRSY0020-100010 A4460 TRSK0600-100010 A1940 714836 A1940 301234 18/2
S7000 7008 7081 A1940 FRSB0390-100010 A1940 TRSY0020-100010 A4460 TRSK0600-100010 A1940 714836 A1940 301234 18/2S8000 8011 8081 A1940 FRSB0390-100010 A1940 TRSY0020-100010 A4460 TRSK0600-100010 A1940 714836 A1940 301234 18/2
Heroal Serie-065 9323 9305 A1320/1 715871 A1320/1 715888 A1320/1 TRSK0650-100010 A4040 714386 A4040 643.0800.5001X5011 18Serie-110E 15 024 15 005 A1320/1 715871 A1320/1 715888 A1320/1 TRSK0650-100010 A4040 714386 A4040 643.0800.5001X5011 18
Inoutic AD L10 Z13 A1860 712283 A1860 704448 A1860 TRSK0610-100010 A1860 714829 A1860 301227 18/2Arcade LA710 ZA710 A1860 712283 A1860 704448 A1860 TRSK0610-100010 A1860 714829 A1860 301227 18/2MD100 LM340 ZM240 A1860 712283 A1860 704448 A1860 TRSK0610-100010 A1860 714829 A1860 301227 18/2Prestige L 276 Z 276 A1860 712283 A1860 704448 A1860 TRSK0610-100010 A1860 714829 A1860 301227 18/2
KBE AD 306 318 A1661 712382 A1661 703717 – – A1660 715000 A1660 301395 18AD-70 370 373 A4460 FRSB0050-100010 A4460 FRSC0090-100010 A4460 TRSK0600-100010 A1940 714836 A1940 301234 18/2MD 103 113 A1223 712351 A1223 704714 A1223 TRSK0710-100010 A1223 714980 A1223 301371 18/2MD-70 9370 9375 A4460 FRSB0050-100010 A4460 FRSC0090-100010 A4460 TRSK0600-100010 A1940 714836 A1940 301234 18/2System_88 8372 8395 A4460 FRSB0050-100010 A4460 FRSC0090-100010 A4460 TRSK0600-100010 A1940 714836 A1940 301234 18/2
Kömmerling Eurodur-3S-Basic 1402 1411 A0612 712276 A0608 703397 A0608 TRSK0250-100010 A0608 714867 A0608 301265 18/2EuroFutur-Classic 2402 2411 A2720 FRSB0100-100010 A2720 FRSC0080-100010 A2720 TRSK0030-100010 A0608 714867 A0608 301265 18/2EuroFutur-Elegance 0102 0111 A2720 FRSB0100-100010 A2720 FRSC0080-100010 A2720 TRSK0030-100010 A0608 714867 A0608 301265 18/288 Plus 6202 6214 A2720 FRSB0100-100010 A2720 FRSC0080-100010 A2720 TRSK0030-100010 A0608 714867 A0608 301265 18/2
LB PAD AL 1-3 AZ 2-3 A1900 FRSB0560-100010 A2040 703656 A2040 TRSK0160-100010 A2040 714898 A2040 301296 18/2Rehau Brillant-Design 550 010 550 510 A1910 FRSB0440-100010 A2860 704967 A2860 TRSK0510-100010 A1900 714843 A1900 301241 18/2
Geneo S 980 AD 532 025 532 035 A1910 FRSB0440-100010 A5000 TRSC0120-100010 A5000 TRSK0900-100010 A2860 714935 A2860 301333 18/3Thermo-Design 550 710 550 720 A1910 FRSB0440-100010 A2860 704967 A2860 TRSK0510-100010 A1900 714843 A1900 301241 18/2
Salamander Bruegmann-AD HP102 + NP 130 HP152 with VS105 A2560 718346 A2660 718551 A2660 TRSK0210-100010 A2660 714881 A2660 301289 18/2Bruegmann-MD HP202 + NP130 HP252 with VS105 A2560 718346 A2660 718551 A2660 TRSK0210-100010 A2660 714881 A2660 301289 18/2blu Evolution 170420 171020 A1900 FRSB0560-100010 A2400/1 TRSC0130-100010 A5080 TRSK1400-100010 A5080 PMRL4080-100010 A5080 318422-001 18/2Design-MD 110036 111036 A1900 FRSB0560-100010 A2860 704967 A2860 TRSK0510-100010 A2860 714935 A2860 301333 18/2Design-2D 210030 211035 A1900 FRSB0560-100010 A2860 704967 A2860 TRSK0510-100010 A2860 714935 A2860 301333 18/2Design-3D 110220 211230 A1900 FRSB0560-100010 A2860 704967 A2860 TRSK0510-100010 A2860 714935 A2860 301333 18/2Streamline 250 230 251 030 A1900 FRSB0560-100010 A2860 704967 A2860 TRSK0510-100010 A2860 714935 A2860 301333 18/2
Schüco Corona-AS-60 8205 8164 A1900 FRSB0560-100010 A2400 704028 A2400 TRSK0520-100010 A2400 714904 A2400 301302 18/2Corona-CT70-AS 8864 8563 A1900 FRSB0560-100010 A2040 703656 A2040 TRSK0270-100010 A2040 714898 A2040 301296 18/2Corona-CT-70-MD 9003 8641 A1900 FRSB0560-100010 A2040 703656 A2040 TRSK0270-100010 A2040 714898 A2040 301296 18/2Corona-SI82 8808 8813 A3081 FRSB0350-100010 A2660 718551 A2660 TRSK0210-100010 A2040 714898 A2040 301296 18/2
Trocal Innonova-2000 51 02 00 52 21 00 A3060 FRSB0580-100010 A1220 703458 A3060 TRSK0750-100010 A1220 714966 A1220 301357 18/2Innonova-70.A5 61 02 30 62 21 40 A2262 FRSB0340-100010 A2260 703625 A2260 TRSK1140-100010 A2260 714911 A2260 301319 18/2Innonova-70.M5 51 04 10 52 21 40 A2262 FRSB0340-100010 A2260 703625 A2260 TRSK1140-100010 A2260 714911 A2260 301319 18/2Serie 88 810 100 820 600 A3060 FRSB0580-100010 A1220 703458 A3060 TRSK0750-100010 A1220 714966 A1220 301357 18/3
5.4.1Continued on next pageIn addition to this frame part list, you can find profile data sheets with diagrams and additional information on the catalogue CD-ROM.
PSK PORTAL 200-Z PLUSParallel tilt & slide fitting with handle control
Frame part list 2Veka Alphaline_90_MD 101,236 103,312 A2665 FRSB0470-100010 A2040 703656 A2040 TRSK0270-100010 A2660 714881 A2660 301289 18/2Softline-70-AD 101,208 103,232 A2665 FRSB0470-100010 A2040 703656 A2040 TRSK0270-100010 A2660 714881 A2660 301289 18/2Softline-70-MD 101,277 103 277 A2665 FRSB0470-100010 A2040 703656 A2040 TRSK0270-100010 A2660 714881 A2660 301289 18/2Softline-AD-58-NA-13 101,086 103,196 A2661 719718 A2040 703656 A2040 TRSK0270-100010 A2040 297919 A2040 301296 18/2Softline-MD-58-NA-9 101,100 103 117 A1660 712306 A1660 703618 – – A1660 715000 A1660 301395 18Swingline 101,233 103,235 A2665 FRSB0470-100010 A2040 703656 A2040 TRSK0270-100010 A2660 714881 A2660 301289 18/2Topline-AD 101,204 103,212 A2665 FRSB0470-100010 A2040 703656 A2040 TRSK0270-100010 A2660 714881 A2660 301289 18/2Topline-MD 101,220 103,220 A2665 FRSB0470-100010 A2040 703656 A2040 TRSK0270-100010 A2660 714881 A2660 301289 18/2Topline-Plus 101,211 103,211 A2665 FRSB0470-100010 A2040 703656 A2040 TRSK0270-100010 A2660 714881 A2660 301289 18/2
Wymar S-3000 3000 3202 A0612 712276 A0608 703397 A0608 TRSK0500-100010 A0608 714867 A0608 301265 18/2Timber12 mm airgap
Eurogroove 7/8x4 A0813 707210 A0807 716328 A0807 TRSK1200-100010 A0807A0807
715048715055
Rightleft
A0807A0807
301418301418
18
Eurofalz 18/8 A1361 707227 A1361 716304 A1361 TRSK1160-100010 A1361 715017 A1361 301401 18Eurofalz 20/8 A1362 707241 A1362 716311 A1362 TRSK1180-100010 A1362
A1362715024715031
Rightleft
A1361A1361
301401301401
18
Eurofalz 24/8Groove axis 13 mm
A4500 RHA4500 LH
FRSB0041-100010FRSB0042-100010
A4500 RHA4500 LH
FRSC0201-100010FRSC0202-100010
A4500
A4505 1)TRSK1260-100010TRSK1270-100010
A4500A4500
PMRL0021-100010PMRL0022-100010
Rightleft
A4500 312803-001 18/2
Eurofalz 30Groove axis 13 mm
A3600
A36051)TRSB0050-100010TRSB0060-100010
A3600
A36051)TRSC0030-100010TRSC0040-100010
A3600
A36051)TRSK0850-100010TRSK0860-100010
A4400 PMRL0010-100010 A1361 301401 18/2
Timber4 mm airgap
A0434 RHA0434 LH
714195714201
A0434 714218 A0434 PRTL0080-100010 A0434 717424 A0434A0434
311432 - right311425 - left
15
1) with 8 mm fixing bolt
Profile manufacturer
Profile/system Frame Sashes Design Striker plate 56 Design Striker plate S-ES Design Striker plate S-RS Design Bag frame parts Design Distance piecesCoupling bracket
for standard locking cams for mushroom head camsfor comfort mushroom head
camsLocking & distance pieces
Bag quantity of 10 distance pieces
5.4.2