Upload
axelosc
View
7
Download
0
Embed Size (px)
DESCRIPTION
PTC is a Custom Builder of Mechanical Presses
Citation preview
PTC is a custom builder of mechanical presses, enjoying a strong customer base across automotive, appliance, furniture, and other contract stampers. Press capacities range from 300 to 2000 metric tons and press drive configurations of crankshaft, eccentric gear, blanking link, combination link and draw link. PTC offers turnkey stamping solutions including transfers, blank loading and feeding, scrap handling, and die change technologies.
Two key factors have made us successful: our accumulated press design expertise and a simple customer-focused discipline that ensures we learn about all of your production criteria (materials, processing speeds, part tolerances, etc.) before we design your press. Put our understanding of press working technology to the test.
CURRENT NEWS
Millennium Press Available Through Stock Program. [ 05.19.2004 ] PTC has the following press available in August. Tonnage: 660 Tons Bed Size: 144" x 60" Stroke: 18" Adjustment: 12" Shut Height Over Bolster: 44" Window: 70" Speed: 15 - 45 SPM Please call or email us for a proposal! Magna International receive two special Blanking Link presses. [ 04.14.2004 ] PTC recently shipped out two 600 ton blanking link presses with a bed size of 144" x 60". The link presses have Free Application Assistance a 4.25" slow down prior to bottom dead centre and then a Back special 0.75" delayed acceleration on the up stroke. This delay is available for the in-die tapping unit because they require a slow upstroke portion to reverse the inertia of the tapping unit.