Public Auction - Asset Sales · 2017-04-20 · T u r n i n g Y o u r A set s i n t o D o l l a r s + S Public Auction G Asset Sales, Inc. Corporate Headquarters 301 Post Office Drive,

Turn

in

g Your Assets into Dollars

Public Auction1000+

LOTS

EVERYTHING

MUST SELL!

Asset Sales, Inc.Corporate Headquarters

301 Post Office Drive, Suite CIndian Trail, NC 28079

Toll Free 888.800.4442 704.821.4315 Fax 704.821.4325 www.asset-sales.com [email protected]

European Headquarters6 Hill End Close, Norwood GreenHalifax, West Yorkshire, HX3 8RH

Tel / Fax [email protected]

MACHINERY FORMERLY OF

NAVISTAR MANUFACTURING

(2) MAZAK NEXUS 10800 II 4-AXIS HORIZONTAL MACHINING CENTERS

LOWHOURS

2AVAIL. 2012

HURCO VMX84 3-AXIS VERTICAL MACHINING CENTER

AUCTION: THURSDAY, MAY 18TH @ 9:00 A.M. EDT

Inspection: Monday, May 15th - Wednesday, May 17th,

From 8:00 A.M. - 4:00 P.M. EDT

MAZAK & CNC MACHINING, ENGINE MANUFACTURING,

FOUNDRY & SUPPORT5565 BROOKVILLE RD.

INDIANAPOLIS, IN 46219

2010

OWNED BY BROOKVILLE EQUIPMENT CORPORATION

106777_Navistar.indd 1 4/20/17 9:30 AM

MACHINERY INSPECTION DATE & TIME – MONDAY, MAY 15TH - WEDNESDAY, MAY 17TH FROM 8:00 A.M. - 4:00 P.M. EDT

2

MAZAK NEXUS 10800 II 4-AXIS HORIZONTAL MACHINING CENTER

CNC HORIZONTAL MACHINING CENTERS(2) MAZAK Model Nexus 10800 II 4-Axis Horizontal Machining Centers with (2) Pallet Changers, 39.37” Pallets, 80.71” Maximum Work Piece Diameter, 62.99” Maximum Height, 66.93” X-Axis Travel, 55.12” Y-Axis, 60.04” Z-Axis, 50 HP, Super Flow T8/1000 High Pressure Coolant, 50 Taper, 120 ATC, MAZATROL MATRIX NEXUS Controls, sn:236356, mfg.3/2012 • sn:230764, mfg.6/2011

MAZAK Model Nexus 8800 II 4-Axis Horizontal Machining Center with (2) Pallet Changer, 31.50” Pallets, 57.09” Maximum Work Piece Diameter, 57.09” Maximum Height, 55.12” X-Axis Travel, 47.24” Y-Axis, 52.17” Z-Axis, 50 HP, Super Flow T8/1000 High Pressure Coolant, 50 Taper, 120 ATC, MAZATROL MATRIX NEXUS Controls, sn:227183, mfg.7/2011

2012

LOWHOURS

106777_Navistar.indd 2 4/20/17 9:30 AM

AUCTION SALE DATE & TIME – THURSDAY, MAY 18TH @ 9:00 A.M. EDT

3


2011LOWHOURS

106777_Navistar.indd 3 4/20/17 9:30 AM


4


ATTENDING THE AUCTION IN PERSON?What you need to bring.....

• Your Driver’s License • Business Card• Tax Exempt Form if Non Taxable

• Bank Letter of Guarantee if Paying via Company Check

2011

HUGE ASSORTMENT OF MANUFACTURING EQUIPMENT, 1000+ LOTS

LOWHOURS

106777_Navistar.indd 4 4/20/17 9:30 AM


CNC VERTICAL MACHINING CENTERS & CNC TOOLROOM MILLS

HURCO Model VMX84 3-Axis Vertical Machining Center with 34” x 86” T-Slotted Table, 84” X-Axis Travel, 34” Y-Axis, 30” Z-Axis, 40 Taper, 40 ATC, Hurco WinMax Mill V08.01.15ST Controls, sn:HH804, mfg.6/2010

HURCO Model CSX50 3-Axis Vertical Machining Center with 16” x 58” T-Slotted Table, 50” X-Axis Travel, 22” Y-Axis, 24” Z-Axis, 0-6000 RPM, 40 Taper, 16 ATC, Ultimax SSM Controls, sn:H505-05302081BD

(2) HAAS Model TM-1 Vertical Tool Room Mills with 9” x 42” T-Slotted Table, 30” X-Axis Travel, 12” Y-Axis, 16” Z-Axis, 40 Taper, 10 ATC, 4000 RPM, sn:32657, mfg.9/2003 • sn:32645, mfg.9/2003

HURCO VMX84 3-AXIS VERTICAL MACHINING CENTER

HURCO CSX50 3-AXIS VERTICAL MACHINING CENTER

(2) HAAS TM-1 VERTICAL TOOL ROOM MILLS

Download a lot book at www.asset-sales.com

5

2010

2003

2AVAIL.

106777_Navistar.indd 5 4/20/17 9:30 AM


6

CNC TOOLROOM LATHES(2) HAAS Model TL-1 16” x 30”cc Lathes with 11” Over Slide, 8” X-Axis Travel, 30” Z-Axis, 1-1/4” Thru Hole, sn:66481, mfg.10/2003 • sn:66487, mfg.10/2003

BOEHRINGER Model CM320 Horizontal Lathe with REXROTH INDRA CNC Controls

VERTICAL TURRET LATHEBULLARD Cutmaster 64” Vertical Turret Lathe with 5 Position Turret & 4 Jaw Chuck

ENGINE LATHESLEBLOND Heavy Duty 22” x 120”cc Engine Lathe with 15” 3-Jaw Chuck, 12-528 RPM, Inch Threading, Taper Attachment, Steady Rest, 2” Thru Hole, sn:NF4742

TIMEMASTER Model 1811x80 18” x 80”cc Engine Lathe with 16” 3-Jaw Chuck, 39 to 2800 RPM, Inch/MM Threading, Steady Rest, 2-1/4” Thru Hole, sn:188099613

LEBLOND MAKINO Regal Servo Shift 19” x 55”cc Engine Lathe with 10” 3-Jaw Chuck, 40-1600 RPM, Inch/MM Threading, Taper Attachment, Quick Change Tool Post, NEWALL DRO, 3” Thru Hole, sn:14E-554

LEBLOND MAKINO Regal Servo Shift 15” x 55”cc Engine Lathe with 12” 3-Jaw Chuck, 45-1800 RPM, Inch/MM Threading, Taper Attachment, Quick Change Tool Post, ACU-RITE II DRO, 2-1/4” Thru Hole, sn:14C-1231

WILLIS Model PR-1340A Microcut 13” x 40”cc Tool Room Lathe with 8” 4-Jaw Chuck, 105-2000 RPM, 1-1/4” Thru Hole, sn:1694

TENSILKUT Model TL505 Hydraulic Tracing Lathe for Turning Tensile Testing Specimen, sn:906112

BULLARD CUTMASTER 64" VERTICAL TURRET LATHE (2) LEBLOND MAKINO REGAL SERVO SHIFT ENGINE LATHES

5

(2) HAAS TL-1 16" X 30" CC LATHES BOEHRINGER CM320 HORIZONTAL LATHE

2AVAIL. 2003

2AVAIL.

64"CHUCK

106777_Navistar.indd 6 4/20/17 9:30 AM


7

TIMEMASTER 1811X80 18" X 80"CC ENGINE LATHE

SBL KNEE MILL

SOUTH BEND MX75 8' ARM X 20" COLUMN RADIAL ARM DRILL

CARLTON 5' ARM X 15" COLUMN RADIAL ARM DRILL

OIL GEAR 35 TON WHEEL PRESS

CINCINNATI 1/4" X 10' SHEAR

Download a lot book at www.asset-sales.com

106777_Navistar.indd 7 4/20/17 9:30 AM


8

CLAUSING STARTRITE VERTICAL BAND SAW

HORIZONTAL & VERTICAL MILLING MACHINES

BOHNER & KOHLE F30 Vertical Milling Machine with 47” x 71” T-Slotted Table

BRIDGEPORT Knee Mill with 9” x 42” T-Slotted Table, 2 HP, Variable Speeds to 3000, ACU-RITE DRO, sn:216954

SOUTH BEND Model 2VS Knee Mill with 10” x 50” T-Slotted Table, 2 HP

SOUTH BEND Model 2VS Knee Mill with 10” x 50” T-Slotted Table, 2 HP

WILLIS Model 5000VS Microcut Knee Mill with 12” x 59” T-Slotted Table, 5 HP, ACU-RITE DRO, sn:990901S

CINCINNATI Model #5 Horizontal/Vertical Milling Machine with 20” x 94” T-Slotted Table, 14 to 1400 RPM

RADIAL ARM DRILLSSOUTH BEND Model MX75/2500 8’ Arm x 20” Column Radial Arm Drill with 50-2100 RPM, T-Slotted Base, sn:740003

GIDDINGS & LEWIS Chipmaster 7’ Arm x 15” Column Radial Arm Drill with 60-2400 RPM, L-Shaped T-Slotted Base with Box Table & Stands, sn:962-00052-73

GIDDINGS & LEWIS Chipmaster 3’ Arm x 9” Column Radial Arm Drill with 60-1200 RPM, Double Sided T-Slotted Base with Box Tables, sn:951-00556-73

CARLTON 5’ Arm x 15” Column Radial Arm Drill with 15 -1500 RPM, 10 HP, Dual Controls, sn:3A 3055

SURFACE GRINDERSOKAMOTO Model ACC-12.24DX 12” x 24” Surface Grinder with Electromagnetic Chuck, Incremental Downfeed, Overwheel Dresser, Controls with Pulse Generator & Coolant System, sn:64566

REID Model 618HR 6” x 18” Surface Grinder with Permanent Magnetic Chuck, DRO, sn:30166FC

HORIZONTAL & VERTICAL BAND SAWS

AMADA Model H900HD Horizontal Band Saw, 36” x 24” Heavy Duty, sn:500191

W.F. WELLS Horizontal Band Saw

CAROLINA INDUSTRIAL Model LDC814 Approx. 8” x 14” Horizontal Band Saw, sn:10030

WILTON 7” x 10” Horizontal Band Saw, sn:03127053

(2) ARMSTRONG Tilting Frame Band Saws

36” Sliding Table Vertical Band Saw

GROB Model 4V-3636” Vertical Band Saw, Butt Welder/Grinder, sn:1774

WILTON Model 8020W4 20” Vertical Band Saw, Butt Welder/Grinder, sn:050209

CLAUSING 20” Vertical Band Saw

JET Model VB516 16” Vertical Band Saw, Butt Welder/Grinder, sn:160292

DOALL Model 16-SFP 16” Vertical Band Saw, sn:79-55555

POWERMATIC Model 143 14” Vertical Band Saw, sn:943083

INDUCTION HARDENING MACHINEAJAX TOCCO 5 Stage Crankshaft Hardening Induction Heater, sn:44-1855-61

OKAMOTO ACC-12.24DX 12" X 24" SURFACE GRINDER

NIAGARA INITIAL PINCH PLATE BENDING ROLL KEYSEATER

DISC SANDERS

24" DOUBLE SIDED DISC SANDER / GRINDER

www.asset-sales.com

DRILL PRESSESCINCINNATI Super Service 21” Pedestal Drill Press

(2) WALKER TURNER 60” Sliding Head, Table Drill Presses

WALKER TURNER 17” Pedestal Drill Press

DAYTON 20” Variable Speed Pedestal Drill Press

JET Model OR-2501F 21” Industrial Pedestal Drill Press, sn:D2-900990

SANDERSWILTON 6” Belt / 10” Disc Sander

MAX 24” Double Sided Disc Sander / Grinder

STANDARD 24” Disc Sander

MASTER 24” Disc Sander

BALDOR 6” Belt Sander with NORDFAB Dust Collector

106777_Navistar.indd 8 4/20/17 9:30 AM


9

GRINDERS & LAPPERS(3) LANDIS 5SE 16”x 35” Multi-Wheel Grinders, sn:90787 • sn:94447 • sn:94407

LANDIS 16” x 35” 5SE Multi-Wheel Grinder, sn:90763

LANDIS 5RE 16”x 32” Multi-Wheel Grinder, sn:91541

(7) LANDIS 5SE 16” x 32” Indexing Pin Grinders, sn:91531 • sn:91546 • sn:91549 • sn:91542 • sn:91544 • sn:91547 • sn:91548

(3) LANDIS 16” SE 16” x 32” 30° Plunge Angle Grinders, sn:90010 • sn:90008 • sn:90012

(3) LANDIS 5SE 16” x 32” 30° Plunge Angle Grinders, sn:90013 • sn:90009 • sn:90011

(3) IMPCO Model 1500-1-D-H-GBQ-36 Lapping Machines with Lap Pins, Mains & Thrust Walls, sn:MF-195-1984

NUMEROUS ABB ROBOTS

(18) LANDIS GRINDERS

AMADA H900HD HORIZONTAL BAND SAW TILT FRAME VERT. BANDSAWDOALL 16-SFP 16" VERTICAL BAND SAW

(3) IMPCO 1500-1-D-H-GBQ-36 LAPPING MACHINES

LARGECAP.

106777_Navistar.indd 9 4/20/17 9:30 AM


10

AIR COMPRESSORS AND DRYERS

(3) INGERSOLL RAND Model 2CV35M3 900 HP Centac Centrifugal Air Compressors, sn:M0011000 • sn:M0011001 • sn:M0011002, mfg.2000

(2) HANKISON Model H-55 Compressed Air Dryers with 4000 CFM @ 105 PSIG, sn:HI653662002001 • sn:H653662002002

CHILLERSTRANE Model CVHF910 Water Cooled Hermetic Centravac Chiller, sn:L02C05211, mfg.2002

TRANE Model CVHF910 Water Cooled Hermetic Centravac Chiller, sn:L02C05212, mfg.2002

TRANE Model CVHF770 Water Cooled Hermetic Centravac Chiller, sn:L96C03172

WELDERSCASTOLIN EUTECTIC Model EuTronic Gap 2501 DC Plasma Transferred Arc Welder, sn:PSN 1327 G066

MILLER Model Legend 302 Welder / 5500-Watt Generator with Trailblazer Professional Series, LP Powered

MILLER Model DC-400 LN-7 Wire Feeder, Mig

MILLER Model Syncrowave 250DX with Coolmate Chiller, Tig

MILLER Model CP-302 22A Wire Feeder, Mig

MILLER Model Shopmaster 300 22A Wire Feeder, Mig

MILLER Model Goldstar 652, Stick

MILLER Model SRH-444, Stick

MILLER Model Deltaweld 302 (Digital) 22A Wire Feeder, Mig

MILLER Model Goldstar 400SS, Stick

ESAB Model Powercut 1500 Plasma Cutter, sn:PL-J604006

SAND LABUniversal Sand Strength Machine, sn:405-0398

ACCUMET PH Meter 900

METTLER Toledo RE40 Refractometer

NUOVA II Stir Plate

RO-TAP Type RX-29 Sand Sieve with Dust Cabinet, sn:11339

TYLER Ultra-Sonic Test Sieve Cleaner

LINBERG Model 732 Blue M Oven 1200°C., sn:927034

THELCO Precision Laboratory Oven

SYBRON Therolyne 2000 Furnace

REDFORD-CARVER Model HBT/CBT-1 Foundry Products Dog Bone Core Machine, sn:HBT/CBT-1-313

REDFORD FOUNDRY Products Dog Bone Core Machine

THWING ALBERT Model 12-65-2010 Electronic Tensile Tester, sn:62186

THWING ALBERT Model QCII-XS Electronic Tensile Tester, sn:30204R

HOBART Mixer

SIMPSON Gerosa Sand Strength Machine, sn:0399001

Assorted Magnetic Stirrers

SIMPSON Clay Washer

DIETERT Model 279 Moisture Teller, sn:6275

NUMEROUS ABB ROBOTS

6-CYLINDER CRANKSHAFT LINE EQUIPMENT

DMTG INGERSOLL CM SYSTEMS

ENGINE HEAD LINEThe Lamb Engine Head Manufacturing Line is tooled at this time for the International 6.4-liter diesel sold in the FORD Super Duty trucks 2008-2010. It all begins with a cast head being delivered to the start of the line that has been deburred, cleaned and sealed. After going through all processes performed in the line the head goes to assembly. All other components are added there, such as valves, springs, cams etc. No components are added on this line.

ASSEMBLYThe Johann A. Krause Inc. Assembly Line is tooled for the assembly of the International 6.4-liter diesel engine it begins with receiving an engine block, heads, crankshaft, cam shaft and rods as these pieces move through the assembly process, all other components for assembly of the heads and the complete engine are added along the line, finishing with an engine that would be ready to run.

BLOCK LINEThe Lamb Block Line is incomplete, but has many usable machines still available.

CRANKSHAFT LINEThe Crankshaft Line is incomplete, but has many usable machines still available.

CAM SHAFT LINEThe INGERSOLL RAND Cam Shaft Line is incomplete, some peripheral.

UNINSTALLED 6 CYLINDER CRANKSHAFT LINE

The INGERSOLL RAND 6-Cylinder Crankshaft Line is incomplete but has many usable machines still available.

Other Line Machinery Including: Numerous ABB Robots, CNC Lathes, CNC Grinders, Chip Processing & Recycling Equipment, Conveyors, Engine Parts, Transmissions, Radiators, Huge Assortment of Manufacturing & Assembly Machinery.

106777_Navistar.indd 10 4/20/17 9:30 AM


11

OGP QL-20 20" OPTICAL COMPARATOR

COORDINATE MEASURING MACHINES

DEA Model Global Advantage 20.33.15 Coordinate Measuring Machine with 2000 X-Axis Travel, 3300 Y-Axis, 1500 Z-Axis, 88” x 169” Granite Table, Renishaw Probe, sn:A100000910

GIDDINGS & LEWIS Model Cordax Discovery D-28 Coordinate Measuring Machine with 31” x 42” Steel Table, sn:P-5003-0998

GIDDINGS & LEWIS Model Cordax RS-150 DCC Coordinate Measuring Machine with 50” x 84” Steel Table, sn:A-0386-B89

GIDDINGS & LEWIS Model Cordax RS-70 DCC Coordinate Measuring Machine with 42” x 50” Steel Table, sn:D-0403

HELMEL Model Phoenix Coordinate Measuring Machine with 32” x 22” Granite Table, sn:N60-64

Huge Inspection Department Including MITUTOYO Calipers, Digital Height Gages, Granite Surface Tables, Bore Gages, Intra Mics, Straight Edges, Parallels, Squares & V-Blocks, VIDMAR Cabinets & Support

GIDDINGS & LEWIS CORDAX RS-70 DCC COORDINATE MEASURING MACHINE

GIDDINGS & LEWIS CORDAX RS-150 DCC COORDINATE MEASURING MACHINE

GIDDINGS & LEWIS CORDAX DISCOVERY D-28 DCC COORDINATE MEASURING MACHINE

HELMEL PHOENIX COORDINATE MEASURING MACHINE

INSPDEPT.

106777_Navistar.indd 11 4/20/17 9:30 AM


12

METAL LABSPECTRO Metal Spectrometer Model Spectrolab, Type LAVFA18B, sn:4I0068

ELTRA CARBON Model CS800 Sulfer Determinator with PC Controlled

TINIUS OLSEN Tensile Tester, Retrofitted by Frank Bacon Machinery, sn:151945

OLYMPUS Model Epoch-1000I Advanced Ultrasonic Flaw Detector, sn:110143210

OLYMPUS Model 38DL Plus Ultrasonic Flaw Detector, sn:120355801

PHASE II Model PHT-1800 Electronic Hardness Tester, sn:PH0111111025

PHASE II Model PHT-1800 Electronic Hardness Tester, sn:PH0111080322

KEYENCE Model VHX-1000 Digital Microscope with VH-100R RZ-x100-x1000 Real Zoom Lenses

VERSAMET Model Unitron 5477 Microscope

BAUSCH & LOMB Stereozoom 7 Microscope

UNITRON Model Bi-8726 Microscope

WILSON BRINELL Hardness Tester, sn:77164

BUEHLER Model Ecomet II Polisher / Grinder, sn:296-ECT-439

BUEHLER Model Handimet Roll Grinder, sn:297-MMM-968

BUEHLER Model Handimet II Roll Grinder, sn:687-HGR-01854

(2) BUEHLER Model Metaserv 250 Grinders / Polishers, sn:689-MGC-00562 • 689-MGC-00561

BUEHLER Model Surfmet I Belt Surface, sn:297-EMO-359

CRANESAssorted Bridge Cranes to 10 Tons

100+ Pneumatic 1/2 & 1 Ton Hoists

BRODERSON Model IC8020 8 Ton Carry Deck Crane, sn:170030

ROLLING STOCKYALE 8,000lb LP Forklift, sn:C813V02497A

YALE 5,000lb LP Forklift, sn:N460403

YALE 3,500lb LP Forklift, sn:N548160

WORKFORCE 350lb Portable Man Lift, sn:TOM-CAT24-0219

BOBCAT Model 953 Skid Loader

(3) INGERSOLL RAND CENTAC CENTRIFUGAL AIR COMPRESSORS

(2) HANKISON H-55 COMPRESSED AIR DRYERS

JLG SCISSOR LIFT

BOBCAT SKID LOADER

900HP

106777_Navistar.indd 12 4/20/17 9:30 AM


13

OFFICE FURNITUREHuge Quantity of Office Cubicles, Desks, Chairs, Laptops, PC’s & Miscellaneous, Cafeteria, Refrigerators, (4) XEROX Work Center Phot Copier / Scanners, Plotters, Etc.

MISCELLANEOUSRIDGID 1224, 1452, 535, 300 Pipe Threaders

48” x 48” x 10” Granite Surface Plates

36” x 72” x 8” Granite Surface Plates

Weather Head Coll-O-Crimp II, Assorted Collet and 100’s of Fittings

FAY & EGAN 24” Planer

NIAGARA Model 5-48-T 48” Initial Pinch Plate Bending Roll

CINCINNATI 1/4” x 10’ Shear

CINCINNATI 3/8” x 6’ Shear

DRIES & KRUMP 8’ Hydraulic Apron Brake

OIL GEAR 35T Vertical Wheel Press

AERCOLOGY Model WA-1000ET Portable Welding Smog Hog, sn:43266

BILZ THERMO Grip Cool Down Tool Setter sn:1SG3200WK

ICE TECH Dry Ice Cooler, Cold Jet Blast System

Cold Jet Dry Ice, Cold Jet Blast System

50+ Bins of Nuts, Bolt & Miscellaneous Fasteners • Huge Assortment of VIDMAR Style Cabinets • Assorted Ladders • Assorted Floor Fans • Arbor Presses • Double End Grinders • MILWAUKEE Abrasive Saws • KURT Machine Vices • #40 & #50 Taper Tool Holders • Torch Sets • ROCKWELL Table Saw • DEWALT Radial Arm Saw • 8’ Hydraulic Folding Brake • Dump Hoppers • Flammable Storage Cabinets • Bottle & House Jacks • Plate Clamps • GREENLEE & RIDGID Pipe Benders & Sets • LAZY SUSAN Parts Cabinets • 3R Swager • Assortment of Chain Falls & Come Alongs • WILTON Bench Vises • Broaches & Broach Sets • Maintenance Department • AALADIN Cleaning System • Huge Assortment of Carts • Hoses • Plant Support Cabinetry • OTC & ENERPAC Hydraulic Jacks • Electric & Pneumatic Hand Tools • COB Mag Base Drill • Shackles • Huge Assortment of Lifting Chains • Sockets & Socket Wrenches • C-Clamps • Master Kerosene Heaters • Flammable Cabinets • Huge Assortment of Miscellaneous • Plus Much More

100+HOISTS

106777_Navistar.indd 13 4/20/17 9:30 AM

Turn

ing Y

our Assets into Dollars Asset Sales, Inc.Corporate Headquarters301 Post Office Drive, Suite C

Indian Trail, North Carolina 28079Toll Free: 888.800.4442 Direct: 704.821.4315

Fax: 704.821.4325 – www.asset-sales.comAsset Sales Inc. • Lance Mannion – Indiana License #AU19900099

(3) LATE MODEL MAZAK NEXUS 10800 & 8800 CNC HORIZONTAL MACHINING CENTERS

DIRECTIONS: From Indianapolis, IN Airport:

Exit Airport, follow signs for 70W / I-74E / I-465S merge onto I-465S, continue for 18.3 miles. Take exit 47 for US 52E/Brookville Rd. Turn left onto S. Brookville Rd. Destination will be on the left. Follow auction signs.

HOTELSHOLIDAY INN INDIANAPOLIS SOUTHEAST 5302 Victory Dr. - Indianapolis, IN 46203 (317) 791-9100

CROWN PLAZA - INDIANAPOLIS AIRPORT 2501 South High School Rd. - Indianapolis, IN 46241 (317) 244-6861

Asset Sales, Inc. Does Not Pack, Ship, Crate, Transport or Rig Items.

Buyers May Pick Up Their Items at the Auction

Location or Can Arrange for a Third Party Logistics

Firm to Manage the Removal Process for

Them.

PUBLIC AUCTIONMACHINERY FORMERLY OF

NAVISTAR MFG.OWNED BY BROOKVILLE EQUIPMENT CORPORATION

MAZAK & CNC MACHINING, ENGINE MFG, FOUNDRY & SUPPORTINDIANAPOLIS, IN

THURSDAY, MAY 18TH @ 9:00 A.M. EDT

ABBREVIATED TERMS & CONDITIONS OF AUCTIONYOUR PARTICIPATION AND BIDDING ARE CONSIDERED A LEGALLY BINDING CONTRACT – IT IS PROHIBITED TO BID ON ANY ITEM THAT YOU CANNOT PAY FOR IN FULL BY THE SPECIFIED DATE OR REMOVE BY DESIGNATED DATE.

Subject to amendments and modifications announced by the auctioneer at the time of the auction, any person participating in the auction shall be bound by the following terms and conditions. The auctioneer does not warrant the accuracy, authenticity, description, weight, count or measure of any listings specified herein.

All articles will be sold to the highest bidder conforming to the bid process in accordance to the AUCTIONEER’S TERMS & CONDITIONS – COMPLETE COPIES AVAILABLE AT WWW.ASSET-SALES.COM. No article shall be removed unless paid in full and all articles purchased shall be re-moved in the time allocated by the auctioneer. No item, no matter how small or how far the purchaser has to travel, may be removed until the close of the auction sale.

All payments shall be by way of cash, certified check, wire transfer and/or a company check accompanied by a bank letter of guarantee payable

to Asset Sales, Inc. All bidding and invoicing will be in US Dollars ($). All bidders are responsible for all applicable taxes.

Rigging/Removal of sold equipment is the sole responsibility of the buyer and must be completed by the posted date. Rigging/Removal may not begin until payment has been made in full and the auction sale is complete. All heavy rigging will require a certificate of insurance for $1,000,000.00 naming Asset Sales, Inc. as the insured.

ALL SALES ARE FINAL, ON AN “AS IS – WHERE IS,” “IN PLACE,” “WITH ALL FAULTS” BASIS. A 15% Buyer’s Premium will apply to all onsite purchases and a 18% Buyer’s Premium for online purchases.

REGISTRATION & BIDDING ONLINE:If you plan to bid with Bidspotter.com, you must be pre-approved by Asset Sales, Inc. The pre-approval process is easy, but necessary. Asset Sales, Inc. will verify telephone number and confirm agreement to the Terms and Conditions.

ANYONE OUTSIDE OF THE CONTINENTAL UNITED STATES WILL BE REQUIRED TO WIRE TRANSFER A MINIMUM DEPOSIT OF $5000 TO BE APPROVED FOR ALL NON-ONSITE BIDDING.

ASSOCIATION OFMACHINERY AND

EQUIPMENT APPRAISERS

PresortedFirst Class Mail

U.S. PostagePAID

Kokomo, INPermit No. 154

2AVAIL. 2012

1000+LOTS

106777_Navistar.indd 14 4/20/17 9:30 AM

Documents

Public Auction - Asset Sales · 2017-04-20 · T u r n i n g Y o u r A set s i n t o D o l l a r s + S Public Auction G Asset Sales, Inc. Corporate Headquarters 301 Post Office Drive,