rev.

10-0

6

Technical specifications and equipments are subject to change without any notice or obligation on the part of the manufacturer

www.tecnimetalsa.esE mail: info@tecnimetalsa.com

tel +34 91 3562294 - fax +34 91 3555808

Tecnimetal sa

hitech europe

Ignacio Ellacuria, 10 - 28017 Madrid - Spain

AP 31/COMBO(code 02-31-3DVA-C)• Single wheel Ø 300mm.• Central/Individual pressure(5 samples)• Speed 40~600 rpm• Dim. 600x800x600 mm• Weight: 55 kg.

Technical data V Series and COMBO CONSUMABLES

®

tecmet 2000 supplies a wide range of high-quality metallurgical consumables for the preparation of high-quality samples:Abrasive cut off wheelsDiamond bladesMounting accessoriesHot mounting compoundsAbrasive papersSelf-adhesive diamond discsAbrasive suspensionsPolishing productsPolishing clothsMagnetic systemAccessories for finishing.

* Ask for the Consumables Catalogue

• Corrosion, heat and impact resistant moulded cover.• Solid steel chassis and stainless steel bolts and screws.• Control panel with start and water flow buttons, timer • and speed knobs. • Housing for removable working wheel 200/300mm diameter • with cover and splash ring.• The adjustable head rotates at 75 RPM.• Working wheel rotates and .• Adjustable water dispenser.• Mechanical fluid dispenser.• Motor: 220V – AC – 0,75Kw – 50 Hz, Inverter controlled

• Note: all the machines with individual pressure are equipped with a standard sample holder (Ø max 40mm.)

AP32/COMBO(code 02-31-4DVA-C)• Double wheel Ø 300mm.• Central/Individual pressure(5 samples)• Speed 40~600 rpm• Dim. 900x800x600 mm• Weight: 65 kg.

AP 21V(code 02-31-1DVA-C)• Single wheel Ø 200/230mm.• Individual pressure (3 samples)• Speed 40~600 rpm• Dim. 350x750x600 mm• Weight: 35 kg.

Working wheels, Ø 200,230,250,300mm. –Sample holders for round, rectangular and teardrop jigs, of various measures – Sampleholders, 3 or 5 holes, various diameters –Sample sapcers – Paper clamps.

AP 22V(code 02-31-2DVA-C)• Double wheel Ø 200/230mm.• Individual pressure(3 samples)• Speed 40~600 rpm• Dim. 700x750x600 mm• Weight: 45 kg.

AP 21(code 02-31-1DTA-C)• Single wheel Ø 200/230mm.• Individual pressure(3 samp)• Speed 300 rpm, rotation.• Motor 220V – AC – 0,37 Kw• Dim. 350x750x600 mm• Weight: 35 kg.

Accessories

AP 31/IP3(code 02-31-5DVA-C)• Single wheel Ø 300mm.• Individual pressure• Velocità 40~600 rpm• Dim. 600x800x600 mm

• Weight: 55 kg. (we suggest the use of a Ø 250 mm. working wheel when polisching with the Cameo system)