Centrifugal Pump Specification Sheet

Customer: [Moniker] Job Number: [Moniker] Item #:

Plant Name: Date: Revision:

Plant Location: [Moniker] Prepared by: Case:

Service: Checked by:

Manufactured by: Page: 1 of 1

1 Size And Type of Pump: Make of Pump:

2 Fluid Name: No. of Pumps Required:

3 Service Conditions Performance

4 Liquid: Cap. @ P&T Norm. (GPM): [Moniker] Rated: Proposal Curve No.:

5 Temp. Norm. (°F): [Moniker] Disch. Press. (psig): [Moniker] RPM:

6 Temp. Max. (°F): Suct. Press. Max. (psig): [Moniker] Rated: Npshr (Water):

7 Sp. Gr. @ P&T: [Moniker] Diff. Press. (psi): [Moniker] Eff. (Bhp): [Moniker] Rated:

8 Viscosity @ P&T (cP): [Moniker] Diff. Head (ft): [Moniker] Max. Bhp Rated Imp.:

9 Vap. Press. @ T (psia): [Moniker] Npsha (ft): Max. Head Rated Imp.:

10 Corr. / Erosion Factors: Hyd. Hp: Min. Continuous GPM:

11 Rotation (Viewed From cPlg End):

12 Construction Details Shop Tests

13 Nozzles Size Rating Facing Location Non-Wit Perf. Wit Perf.

14 Suction: Non-Wit Hydro. Wit Hydro.

15 Discharge: Npsh Req’D. Wit Npsh

16 Case – Mount: Centerline Foot Bracket Vertical (Type) Shop inspection

17 - Split:: Axial Radial Type Volute: Single Double Diffuser Dismantle & inspect After Test

18 - Pressure: Max. Allow (psig): °F: Other:

19 - Connections: Vent Drain Gauge

20 Impeller Diameter, Rated: Maximum: Type:

21 - Mount: Between Bearings Overhung Materials

22 Bearings Type: Radial Thrust Pump:

23 - Lube: Ring Oil Flood Oil Mist Finger Pressure

24 Coupling Manufacturer: Model: Case/Trim Class:

25 - Driver Half Mounted by: Pump Mfr. Driver Mfr. Purchaser

26 Packing Mfr. And Type: Size/No. of Rings:

27 Mechanical Seal Mfr. & Type: API Class Code:

28 - Mfr. Code: Baseplate:

29 Auxiliary Piping Vertical Pumps

30 C.W. Pipe Plan: Pit or Sump Depth:

31 C.W. Pipe Plan: Cu S.S. Tubing Pipe Min. Submergence Req’D.:

32 Total Cooling Water Required (GPM): Site Fi Required:

33 Packing Cooling injection Required (Total GPM): psig: Column Pipe: Flanged Threaded

34 Seal Flush Pipe Plan: Line Shaft: Open Closed

35 Seal Flush Pipe Plan: C.S. S.S. Tubing Pipe Bearings: Bowl Line Shaft

36 External Seal Flush Fluid: (GPM): psig: Bearing Lube: Water Oil

37 Auxiliary Seal Plan: Grease

38 Auxiliary Seal Plan: Cu S.S. Tubing Pipe Float & Road: C.S. S.S.

39 Auxiliary Seal Quench Fluid: Brz

40 Motor Driver Float Switch:

41 Mfr.: Pump Thrust Up (lb):

42 Frame: Type: Duty: Pump Thrust Down (lb):

43 Hp: RPM: V/Ph/Cy: Approx Wt. Pump & Base:

44 Enclosure: Service Factor: Site Data

45 Bearings: Lube: Elevation (ft):

46 insulation: Amb. Temps (°F), Min:

47 Full Load Amps: Locked Rotor Amps: Amb. Temps (°F), Max:

48 Vhs: Vss: Vert. Thrust Cap (lb.): % Relative Humidity, Min:

49 Temp Rise (°F): Space Heater: % Relative Humidity, Max:

50 Area Classification: Barometer (psia):

51 Notes:

52

53

54

55

56

57

58

59

60

61

62

63

64

65