Pumps.Hoses.Valves. Filters. Tanks.Fittings. … Allflow Vacuum... · a aaa •aaaZZZ DOOÁRZ FR Q] Pumps.Hoses.Valves. Filters. Tanks.Fittings. CONTENTS Vacuum Tanker Fittings Manway

Pumps. Hoses. Valves. Filters. Tanks. Fittings.

Vacuum Tanker Product Guide 20I6



Allflow specialises in providing innovative, high quality pumping equipment and vacuum tanker products for industrial requirements that will exceed expectations.

We source the productsso you can do the best job

for your customers.

ORDER ONLINE ANYTIMEwww.allflow.co.nz

OUR MISSION COMPANY VALUESIntegrity: Striving for the highest ethical standards. Being consistent, honest, accountable, and fair towards our customers, suppliers, and business personnel.

Quality: Investing in superior products and focusing on continuous improvements to provide solutions for our customers and our business.

Belief: Every individual is treated with the fullest respect and dignity.

Environment: Providing friendly, efficient, on time service and actively protecting the environment around us.

0800 255 356 • www.allflow.co.nz


CONTENTS

Vacuum Tanker Fittings

Manway Hatches

Hose and Pipe

Signage

Crustbusters

Truck Vibrators

Suction Booms

Vacuum Pumps

Segmented Risers

Septic Tank Filter


www.allflow.co.nz • 0800 255 356

Ø” 2” 2.5” 3” 4” 6”

Ø 48 63 75 93 145

H 117 147 170 218 320

h 81 104 121 157 232

L 265 280 319 385 452

F 80 86 90 100 102

kg 1.950 2.450 3.800 6.300 10.650

Ø” 4” 6”

Ø 93 145

H 248 323

h 158 233

L 322 468

F 103 106

I 150 150

d 13 13

S 180 180

kg 7.200 11.000

Description Part # Size $

Lever Gate Valve– female BSP threads

VAC-BRLGV2 2” $280 +gst

VAC-BRLGV2.5 2.5” $305 +gst





Lever Gate Valve – flanged

VAC-BRLGV4F 4” $495 +gst

VAC-BRLGV6F 6” $560 +gst

Flanged Lever Gate Valve

Lever Gate Valve

VACUUM TANKER FITTINGS



Brass Knife Gate Valve

Stem Gate Valve

Ø” 4” 6”

Ø1 95 145

L 90 102

H 297 393

h 222 286

F 100.5 105.5

kg 4.900 8.800

Ø” 4” 6”

h 262 339

H 460 588

kg 8.400 12.060


Stem Gate Valve – female BSP threads

VAC-BRSGV4 4” $POA

VAC-BRSGV6 6” $475 +gst

Stem Gate Valve – with double acting oil hydraulic ram

VAC-BRSGVOR4 4” $POA

VAC-BRSGVOR6 6” $750 +gst

Stem Gate Valve – with double acting pneumatic cylinder

VAC-BRSGVR4 4” $POA

VAC-BRSGVR6 6” $820 +gst


Knife Gate Valve – with double acting pneumatic cylinder

VAC-BRKGV4R 4” $1,050 +gst

VAC-BRKGV6R 6” $1,195 +gst




Cast Iron Knife Gate Valve

Ø” 6”

D 155

I 150

d 13

F 180

L 150

kg 3.650

Description Part # $

Flanged Weld Sleeve – suits both 4" and 6" Flanged Lever Gate Valve

VAC-SFWN6 $58 +gst

Flanged Sleeve


Knife Gate Valve VAC-CKGV6 6” $POA

Knife Gate Valve – with double acting pneumatic cylinder

VAC-CKGV4R 4” $1,125 +gst



Ø” 4” 6” 8”

h 377 467 574

H 565 712 869

kg 10.970 20.300 26.870




316 Stainless Steel Ball Valve

Brass Ball Valve

25 32 40 50 65 80 100

A 79 97 105 125 140 150 168

B 43 65 70 82 98 110 123

C 140 140 180 180 230 230 260

Ø 3" 4"

W 140 170

H 180 230


Ball Valve – brass

BBVFF25 1" $46 +gst

BBVFF32 1¼" $59 +gst

BBVFF40 1½" $88 +gst

BBVFF50 2" $103 +gst

BBVFF65 2½" $198 +gst

BBVFF80 3" $288 +gst

BBVFF100 4" $400 +gst


Ball Valve – stainless steel

SBV80 3” $265 +gst

SBV100 4” $399 +gst


W

H




Twin Ball Primary Shut-Off

VAC-TBPS2 50mm $440 +gst

VAC-TBPS3 75mm $460 +gst


Twin Ball Primary Shut-Off – with sight glass

VAC-TBPSG2 50mm $490 +gst

VAC-TBPSG3 75mm $510 +gst

Twin Ball Primary Shut-Off – 75mm with sight glass

Twin Ball Primary Shut-Off – 75mm


• Suction capacity: 8,000 lt/min (300 CFM)


Ø” 50mm 75mm

d 140 168

h 50 60

D 50 75

h1 145 162

L 130 145

H 380 420

kg 6.100 8.650

Ø” 50mm 75mm

d 140 168

h 50 60

D 50 75

h1 260 292

L 130 145

H 495 550

kg 6.250 8.700



Twin Ball Primary Shut-Off – 100mm

Twin Ball Primary Shut-Off – 100mm with sight glass


Twin Ball Primary Shut-Off VAC-TBPS4 100mm $880 +gst


Twin Ball Primary Shut-Off – with sight glass VAC-TBPSG4 100mm $1,050 +gst




Ø” 100mm

d 229

h 60

D 102

h1 185

L 108

H 586

kg 14.800

Ø” 50mm 75mm

d 140 168

h 50 60

D 50 75

h1 260 292

L 130 145

H 495 550

kg 6.250 8.700



Low Profile Primary Shut-Off

2” Primary Shut-Off



Low Profile Primary Shut-Off – unpainted

VAC-PS2 50mm $750 +gst

• Minimised overall vacuum tank height (only 184mm tall)

• Cast aluminium lid

• Weldable base

• Standard neck length of 152mm

• Positive shut-off with stainless steel ball

• Easy access for quick clean out

• Heavy duty zinc plated hardware

Other sizes and optional fittings available.

• 75mm Suction Capacity: 12,740 lt/min (450 CFM)

• 100mm Suction Capacity: 14,900 lt/min (525 CFM)

• Minimised overall vacuum tank height (only 184mm tall)

• Weldable base

• Standard neck length of 152mm

• Positive shut-off with 150 or 200mm stainless steel ball

• Easy access for quick clean out




Low Profile Primary Shut-Off – unpainted




75 & 100mm dimensions



38 & 45 Litre Secondary Shut-Off

Secondary Shut-Off


• Gasket in the lid design

• Deflection chute prevents bypass into vacuum pump. Stops premature shut-off

• 200mm stainless steel ball cage assembly

• 150mm stainless steel float ball

• ³⁄��” steel construction


• Available in 38 or 45 litre sizes

• Welded steel construction

• Unpainted



Secondary Shut-Off VAC-SS2 50mm $370 +gst

VAC-SS3 75mm $390 +gst


Secondary Shut-Off VAC-SSS3 75mm $950 +gst

VAC-SSS4 100mm $1,030 +gst

Ø 50mm 75mm

H 442 447

h 285 285

L 249 259

S 80 80

kg 2.800 3.700

Ø 75mm 100mm

H 712 813

W 457 457

kg 38 44

W

H



100mm Aluminium Security Filter (800 CFM)

Cyclone Secondary Shut-Off



45L Secondary Shut-Off – 800 CFM, 4” opening

VAC-CSS4 $1,820 +gst

106L Secondary Shut-Off – 1,500 CFM, 6” opening

VAC-CSS6 $2,400 +gst


800 Micron Final Filter MOR-SF4 4" $650 +gst

MOR-SF6 6" $1,630 +gst

• From 800 to 1,500 CFM

• 45 litre capacity (150mm – 106L)

• Secondary moisture trap

• No secondary bypass

• All welded steel construction

• Unpainted

Ø 100mm 150mm

H 1,105 1,320

W 464 483

kg 44 62

• 800 micron stainless steel mesh safety filter

• To be fitted between the secondary shut-off and vacuum pump for added pump protection

• Flanged entry and exits

• Easy access for daily cleaning



• From 800 to 1,500 CFM

• 45 litre capacity (150mm – 106L)

• Secondary moisture trap

• No secondary bypass

• All welded steel construction

• Unpainted

Horizontal Oil Catch Muffler (375 CFM)

Vertical Oil Catch Muffler / Oil Separator



Vertical Oil Catch Muffler – 130 CFM, 2” tube

VAC-OMC3 2" $380 +gst


VAC-OCM3 3" $650 +gst


VAC-OCM4 4" $690 +gst


Horizontal Oil Catch Muffler – 375 CFM, 3” tube

VAC-OCM3H 3" $600 +gst

Ø 76mm 102mm

H 864 864

W 305 305

kg 27 28

• Perforated stainless steel mesh to catch oil

• Unique cyclone intake and air baffle system

• No need for two separate units

• Quiet pump

• 600 CFM capacity


• Unpainted


• Perforated stainless steel mesh to catch oil

• Unique cyclone intake and air baffle system

• No need for two separate units

• Quiet pump

• 375 CFM capacity


• Unpainted


152mm

495mm

370mm 370mm

570mm



Plastic Level Indicator

Load Level Indicators


Description Part # Size Weight $

O-Ring Style Load Level Indicator – with 6” stainless steel float ball

VAC-LLI 1,444 x 242mm 5.5kg $550 +gst

DN 1000

Ø 200

L 194

L1 140

D 60

H ~ 900

h 60

kg 6.000


Plastic Level Indicator – with steel screwed ring

VAC-PSGSR2 2” $16 +gst

VAC-PSGSR3 3” $26 +gst

Plastic Level Indicator – with stainless steel screwed ring

VAC-PSGSS2 2” $POA

VAC-PSGSS3 3” $POA

• Replacement glasses in stock

Ø” 2” 3”

H 54 85

h 20 25

L 70 100

kg 0.25 0.55



Depression Valve (Vacuum Relief Valve)

Glass Level Indicator



Glass Level Indicator – with steel screwed ring

VAC-GLI4 4” $65 +gst

Glass Level Indicator – with stainless steel screwed ring

VAC-GLIS4 4” $163 +gst

Replacement Glass VAC-GLIG4 4” $10 +gst


Depression Valve VAC-VRV 1.5” $65 +gst

A 108.5

B 133

h 18

H 120

C 60

kg 1.140

Ø” 1.5”

Ø1 41

H 113

h 15

L 67

kg 0.46

• All parts available



4” Pressure Relief Valve

2” Pressure Relief Valve (Factory Pre-set)



Pressure Relief Valve – with hose connection

VAC-BRPRV2 2” $145 +gst


Pressure Relief Valve VAC-BRPRV3 3” $1,080 +gst

VAC-BRPRV4 4” $1,760 +gst

Ø” 2”

Ø 47

d 43

D 49

h 16

h1 51

H 195

L 36

L1 64

kg 1.19

Ø” 3” 4”

H 230 285

L 90 110

P gr ~ 6.800 13.300

• Relief capacity up to 300 CFM

• Stainless steel spring

• Factory pre-set and sealed to 0.34 bar (4.9 PSI)Valve in accordance with the directive EC/97/23 – category lll

• Teflon seat

• Can be mounted in reverse to be vacuum relief

• Also available ex-factory in 3” size

• 4” BSP inlet and outlet

• Valve supplied preset from factory



Setting Method – Safety Valves

Setting Method – Depression Valves


A. Release the rotation screw (1) to enable the upper ring (3) to rotate. To increase pressure rotate clockwise, to decrease pressure rotate anti-clockwise.

B. Once desired pressure is reached ensure stem (2) is in correct place (A) to enable rotation screw (1) to be tightened. See diagram. Upper ring (3) may need to be adjusted to fit securely.

C. Make sure stem can only slide vertically and not rotate.

Do not replace standard anti-rotation screw with any other types of screws or blocking systems. Use correct replacement part only.

Contact Allflow for more information.

A. Take off the cover (1) from the adjusting bell (2) by using a screwdriver.

B. Loosen the stop set nut (3) by holding the adjusting bell firmly (2).

C. Regulate the pressure on the spring by turning the adjusting bell (2) clockwise to increase the pressure and anti-clockwise to reduce pressure.

D. When complete, screw the stop set nut (3) on again by holding the adjusting bell (2) firmly. The set nut must be screwed with a torque of 10Nm. Insert the cover (1) while holding pressure on the adjusting bell (2).

E. Set the seal by fastening the cover (1) with a wire (4).

A B C D E

A B



Vacuum / Pressure Gauge

Four Way ValveWith Pneumatic ActuatorManual



Vacuum / Pressure Gauge VAC-VG63 63mm $POA

VAC-VG100 100mm $POA


Four Way Valve – with pneumatic actuator

MOR-4WVPA 4” $1,755 +gst

MOR-4WVPA6 6” $1,910 +gst

• Stainless steel case

• 30”Hg / +20 PSI

• Bottom entry

• Liquid filled to reduce needle flutter

Four Way Valve


Manual Four Way Valve MOR-4WV 4” $750 +gst

MOR-4WV6 6” $1,550 +gst



Knife Gate Valve Lever

Gate Valve Lever



Gate Valve Lever VAC-BRSGVL6 4” – 5” – 6” $53 +gst

VAC-BRSGVL8 8” $62 +gst


Knife Gate Valve Lever VAC-CKGVL 6” $60 +gst

DN 4” – 5” – 6” 8”

A 85 89

B 155 187

C 170 205

D 285 325

E 345 445

F 120 120

S 30 30

kg 2.600 3.050

DN 6”

A 220

B 165

C 420

D 92

S 30

kg 2.560




Ball & Socket Hose Fittings• Allows for an adjustable fitting between hoses


Female Coupling – Hosetail MOR-FER100F 100mm $49 +gst

Male Coupling – Hosetail MOR-FER100M 100mm $49 +gst

Female Coupling – Hosetail MOR-FER152F 152mm $95 +gst

Male Coupling – Hosetail MOR-FER152M 152mm $95 +gst

Bayer Fittings


Female Coupling – Hosetail BAU-GFC100 100mm $55 +gst

Male Coupling – Hosetail BAU-GMC100 100mm $124 +gst

Female Coupling – Hosetail BAU-GFC150 150mm $96 +gst

Male Coupling – Hosetail BAU-GMC150 150mm $223 +gst




A – Male Adapter – 2” female thread GLP200A $9.00 +gst

B – Female Coupler – 2” male thread GLP200B $21.00 +gst

C – Female Coupler – 2” hose shank GLP200C $21.00 +gst

D– Female Coupler – 2” female thread GLP200D $21.00 +gst

E – Male Adapter – 2” hose shank GLP200E $9.00 +gst

F – Male Adapter – 2” male thread GLP200F $9.00 +gst

PL – Plug – 2” for female coupler GLP200PL $9.00 +gst

CAP – 2” for male adapter GLP200CAP $21.00 +gst

45°F – Male Adapter – for 2” male thread GLP200F45 $9.00 +gst

EPDM Replacement Gasket – 2” for male thread 90040 $1.50 +gst

4 Bolt Valve – 2” female full port V204FP $92.00 +gst

4 Bolt Nozzle Valve – 2” full port w/90° elbow V204FP $108.00 +gst


Locking Camlocks

Enhanced Safety

Exclusive Cam Lever Locking Mechanism helps to reduce the possibility of unintentionally opening the cam levers, which could result in personal injury and costly spills.

Smooth Sealing Surface

Parting lines have been removed from the sealing area of the male couplings as illustrated below, this reduces the possibility of leaks and wear to the rubber seal.

• Stainless steel bolts

• Precision molded in polypropylene

• Polypropylene is reinforced with fibreglass for additional strength. Self aligning ball moves freely against the Teflon® seals for smooth operation. The valve opens and closes with little pressure on the handle

• Ball is diamond turned after molding to make it spherically perfect which provides precise control between ball and seats

• Viton® “O” rings

• Teflon® self-lubricating stem brushings and seats cannot stick or bind

• 4 bolt – maximum operating pressure 150 PSI @ 21°C, 75 PSI @ 65°C

A – Male Adapter 2” Female Thread

E – Male Adapter 2” Hose Shank

45°F – Male Adapter 2” Male Thread

B – Female Coupler 2” Male Thread

F – Male Adapter 2” Male Thread

Replacement Gasket

C – Female Coupler 2” Hose Shank

PL – Plug 2” for Female Coupler

4 Bolt Valve 2” Female Full Port

D – Female Coupler 2” Female Thread

CAP 2” for Male Adapter

4 Bolt Nozzle Valve 2” Full Port – w/90° elbow

Expanded Product Application

By extending the nipple length of the “B” Series, this coupling can be used in applications that would normally require an additional fitting to cam properly.




Camlock Reducers Skimmers

Top Skimmer

Camlock Reducer

Bottom Skimmer

Flanged Camlock


Camlock Reducer D300A200 3 – 2” $55 +gst

D400A300 4 – 3” $75 +gst

D600A400 6 – 4” $142 +gst

Flanged Camlock KAM-FLA400 4” $106 +gst

KAM-FLA600 6” $167 +gst


Top Skimmer GVTHS50 50mm $58 +gst

Bottom Skimmer GVBHS50 50mm $58 +gst

GVBHS76 76mm $108 +gst

Alloy Camlocks

• BSP Thread Standard, also available in NPT Thread

• Available to Military specifications MIL-C-27487 F

• Stainless steel and bronze camlocks also available

Our 102mm and 152mm Female Camlocks have an extra internal lip so you don’t suck in the rubber gasket under vacuum.

A. 20 – 204mm B. 20 – 204mm C. 20 – 204mm D. 20 – 204mm

DC–Cap. 20 – 204mm DP–Plug. 20 – 204mm E. 20 – 204mm F. 20 – 204mm


0800 255 356 • www.allflow.co.nzwww.all�ow.co.nz58 Gladstone Rd, Richmond, Nelson. Ph 03 543 9057, sales@all�ow.co.nz 17.


Power Booster

“ This device does everything they say it will! I had a residential septic tank to pump, with a long, steep, 85 metre pull. The vertical lift was approximately 15 mtrs. With a 3 inch hose, I pumped it out in 25 minutes. Without the POWER BOOSTER, this pumping would have taken several hours or been impossible to accomplish. The job was in the summer with 30+ degree heat, and the pump did not even get hot because the air from the POWER BOOSTER kept the pump cool. On another job, I had three 10 mtr hoses, of which about 6 mtrs was on level ground. The rest was up a steep driveway by a lake. This time it took 20 minutes to pump 3,800 litres. It took me longer to get out the hoses and put them back, than it did to do the job with the POWER BOOSTER. ” - Mel

The application of the Power Booster system makes it the most versatile and unique waste recovery system available to the pumping industry today. It's simple, lightweight design makes installation as simple as a snap of the cam locks.

Due to its light weight design it does not have to be lowered with heavy equipment like diaphragm pumps or other weighty equipment. It can be easily installed on any vacuum equipment without any modi�cations. The Power Booster pumping nozzle can be used conveniently on vacuum equipment and easily removed for compact storage. Because of the Power Booster's unique design it can be installed in series, in tandem or even inverted for use in slurry suspension, hydro-excavation and unloading. Because the Power Booster pumping nozzle is so light weight, compact and easy to install it has already been used on 1000's of projects worldwide. Because of it is �uid-conveyance operation which contains no moving parts, it is fundamentally safe and can be placed almost anywhere.

The Power Booster is manufactured with male cam locks at each end to adapt to various applications. First, it may be utilized as a single unit at the end of the line to increase vertical lift well beyond 30m or in series to vacuum liquids and sludges to any height. It’s also designed to be inverted for a variety of mixing, stirring, trenching or unloading. When placed in series your vertical lift limitations virtually disappear. For hose runs 100 to 150 metres place one at the end of the vacuum hose and one equal distance between the end of the hose and the vacuum unit, for longer runs continue placing a Power Booster approximately every 120m.

The Power Booster �uid-conveyance pumping nozzle is a compact, �uid -operated, vacuum assisted waste recovery nozzle replacing pressure discharge pumps. These compact units are designed to operate in hazardous and non-hazardous waste removal, safely pumping materials such as grease, oil, heavy sludge, septic, tank bottoms, sand and more.

VAC-PB3 $1890 +gst

Description Part No $

75mm Power Booster

VAC-PB4 $2580 +gst100mm Power Booster

$158 +gst30m Air Hose Kit to suit

Unlike any other system on the market, the Power Booster can work with liquid or sludge materials. Designed to work as a single unit or in series, wastes can be conveyed vertically and horizontally without limitation. One unit can move sludge over 61 meters vertically, suspending heavy solids in the infused �uid stream. Stacking the Power Booster system in series waste materials can be conveyed continuously without restriction.

● Patented design● Compact, lightweight & safe● One unit can move sludge over 60 mtrs vertically● Single unit or in series

“This device does everything they say it will!”


Power Booster

“I had a residential septic tank to pump, with a long, steep, 85 metre pull. The vertical lift was approximately 15 metres. With a 3 inch hose, I pumped it out in

25 minutes. Without the Power Booster, this pumping would have taken several hours or been impossible to accomplish. It took me longer to get out the hoses

and put them back, than it did to do the job with the Power Booster.” – Mel

The Power Booster fluid-conveyance pumping nozzle is a compact, fluid-operated, vacuum assisted waste recovery nozzle replacing pressure discharge pumps. These compact units are designed to operate in hazardous and non-hazardous waste removal, safely pumping materials such as grease, oil, heavy sludge, septic, tank bottoms, sand and more.

• Patented design

• Compact, lightweight and safe

• One unit can move sludge over 30 metres vertically

• Single unit or in series

What is it?

What makes it so good?

How does it work?


Power Booster VAC-PB2 2" $1,790 +gst

VAC-PB3 3" $1,980 +gst

VAC-PB4 4" $2,580 +gst

VAC-PB6 6" $POA

Unlike any other system on the market, the Power Booster can work with liquid or sludge materials. Designed to work as a single unit or in series, wastes can be conveyed vertically and horizontally without limitation. One unit can move sludge over 30 meters vertically, suspending heavy solids in the infused fluid stream. Stacking the Power Booster system in series waste materials can be conveyed continuously without restriction.

The application of the Power Booster system makes it the most versatile and unique waste recovery system available to the pumping industry today. It’s simple, lightweight design makes installation as simple as a snap of the cam locks.

Due to its light weight design it does not have to be lowered with heavy equipment like diaphragm pumps or other weighty equipment. It can be easily installed on any vacuum equipment without any modifications. The Power Booster pumping nozzle can be used conveniently on vacuum equipment and easily removed for compact storage. Because of the Power Booster’s unique design it can be installed in series, in tandem or even inverted for use in slurry suspension, hydro-excavation and unloading. Because the Power Booster pumping nozzle is so light weight, compact and easy to install it has already been used on 1000’s of projects worldwide. Because of it is fluid-conveyance operation which contains no moving parts, it is fundamentally safe and can be placed almost anywhere.

The Power Booster is manufactured with male cam locks at each end to adapt to various applications. First, it may be utilized as a single unit at the end of the line to increase vertical lift well beyond 30m or in series to vacuum liquids and sludges to any height. It’s also designed to be inverted for a variety of mixing, stirring, trenching or unloading. When placed in series your vertical lift limitations virtually disappear. For hose runs 100 to 150 metres place one at the end of the vacuum hose and one equal distance between the end of the hose and the vacuum unit, for longer runs continue placing a Power Booster approximately every 120 metres.

www.all�ow.co.nz58 Gladstone Rd, Richmond, Nelson. Ph 03 543 9057, sales@all�ow.co.nz 17.


Power Booster

“ This device does everything they say it will! I had a residential septic tank to pump, with a long, steep, 85 metre pull. The vertical lift was approximately 15 mtrs. With a 3 inch hose, I pumped it out in 25 minutes. Without the POWER BOOSTER, this pumping would have taken several hours or been impossible to accomplish. The job was in the summer with 30+ degree heat, and the pump did not even get hot because the air from the POWER BOOSTER kept the pump cool. On another job, I had three 10 mtr hoses, of which about 6 mtrs was on level ground. The rest was up a steep driveway by a lake. This time it took 20 minutes to pump 3,800 litres. It took me longer to get out the hoses and put them back, than it did to do the job with the POWER BOOSTER. ” - Mel

The application of the Power Booster system makes it the most versatile and unique waste recovery system available to the pumping industry today. It's simple, lightweight design makes installation as simple as a snap of the cam locks.

Due to its light weight design it does not have to be lowered with heavy equipment like diaphragm pumps or other weighty equipment. It can be easily installed on any vacuum equipment without any modi�cations. The Power Booster pumping nozzle can be used conveniently on vacuum equipment and easily removed for compact storage. Because of the Power Booster's unique design it can be installed in series, in tandem or even inverted for use in slurry suspension, hydro-excavation and unloading. Because the Power Booster pumping nozzle is so light weight, compact and easy to install it has already been used on 1000's of projects worldwide. Because of it is �uid-conveyance operation which contains no moving parts, it is fundamentally safe and can be placed almost anywhere.

The Power Booster is manufactured with male cam locks at each end to adapt to various applications. First, it may be utilized as a single unit at the end of the line to increase vertical lift well beyond 30m or in series to vacuum liquids and sludges to any height. It’s also designed to be inverted for a variety of mixing, stirring, trenching or unloading. When placed in series your vertical lift limitations virtually disappear. For hose runs 100 to 150 metres place one at the end of the vacuum hose and one equal distance between the end of the hose and the vacuum unit, for longer runs continue placing a Power Booster approximately every 120m.

The Power Booster �uid-conveyance pumping nozzle is a compact, �uid -operated, vacuum assisted waste recovery nozzle replacing pressure discharge pumps. These compact units are designed to operate in hazardous and non-hazardous waste removal, safely pumping materials such as grease, oil, heavy sludge, septic, tank bottoms, sand and more.

VAC-PB3 $1890 +gst

Description Part No $

75mm Power Booster

VAC-PB4 $2580 +gst100mm Power Booster

$158 +gst30m Air Hose Kit to suit

Unlike any other system on the market, the Power Booster can work with liquid or sludge materials. Designed to work as a single unit or in series, wastes can be conveyed vertically and horizontally without limitation. One unit can move sludge over 61 meters vertically, suspending heavy solids in the infused �uid stream. Stacking the Power Booster system in series waste materials can be conveyed continuously without restriction.

● Patented design● Compact, lightweight & safe● One unit can move sludge over 60 mtrs vertically● Single unit or in series




Sightglass Assembly

• Supplied complete with camlocks as shown

• Compact pipework option for tipping units allowing piping from shut-offs to track along the bottom of tank and truck chassis

• No flexible hose to keep replacing

• Matching steel flange available

• NBR oil resistant rubber

• Hollow D section

• 6.9m long lengths

• Specifically designed as rear door seal for vacuum tankers

Flanged Swivels


Sightglass Assembly – polycarbonate tube

VAC-PCST3 75mm $173 +gst

Description Part # Length $

NBR Rear Door Rubber MOR-DR 6.9m $488 +gst


Flanged Swivel – with 2x o-rings to suit flanges

VAC-SWIVEL4 100mm $412 +gst



Rear Door Rubber

48mm

48mm

48mm




Moro Hydraulic Rear Door Assembly


Rear Door Hydraulic Kit MOR-RD1 $2,850 +gst

Left Rear Door Hydraulic Locking Pin and Cylinder

MOR-RD2 $1,420 +gst

Right Rear Door Hydraulic Locking Pin and Cylinder

MOR-RD3 $1,420 +gst

Rear Door Welded Parts Kit for Locking Cylinders

MOR-RD4 $550 +gst

Rear Door Top Hinge Kit MOR-RD5 $1,150 +gst

• The Moro Full Hydraulic Locking Rear Door Assembly meets EN10204 standard. Locking pins are stamped with the EN compliance

• Complete with all hydraulic hoses, fittings and hydraulic rams for operating the rear door and pressure controlled hydraulic circuit, allowing for precision opening, closing and locking every time

• Made in Italy

Note: Comes as parts only and does not include tank section or door ring. Shown for visual purposes only.



MANWAY HATCHES

12” (305mm) Manway Hatch – 3 wingnut

Description Part # W/nuts Weight $

12” Manway – with 6“ neck, ¼” base, unpainted

VAC-MANWAY12 3 18kg $380 +gst

390mm

252.5mm

314mm


• ¼” (6.35mm) steel weldable base

• 6“ (152mm) standard neck length

• Not hinged – lid is loose when open

• Unpainted








• 6” (152mm) standard neck length

• Unpainted


495mm

252.5mm

425mm



MANWAY HATCHES






20” Manway – with 12” neck, ¼” base, unpainted

VAC-MANWAY20-12 6 45kg $POA

20” S/S Manway – with 6” alum. neck, ¼“ alum base

VAC-MANWAY20A 6 23kg $1,180 +gst


25” Manway – with 12” neck, ¼” base, unpainted

VAC-MANWAY25-12 6 45kg $735 +gst

688mm

252.5mm

527mm



• 6“ (152mm) and 12” (305mm) standard neck lengths

• 20” stainless steel unit – 6” aluminium neck, ¼” base




• 12” (305mm) standard neck lengths

• Unpainted


815mm

252.5mm

629mm



MANWAY HATCHES


Centre Punch Strapping



VAC-MANWAY36 8 76kg $1,275 +gst

Description Part # Size Quantity $

Centre Punch Strapping Tool

TIG-CPT300 Suits all 1 $380 +gst

Stainless Steel Strapping Clamps

TIG-CPSS10 2" 50 $195 +gst

TIG-CPSS14 3" 50 $213 +gst

TIG-CPSS20 4" 25 $134 +gst

TIG-CPSS32 6" 25 $198 +gst

1070mm

460mm

895mm

• Gasket in the neck design

• Sturdy 8 wingnut design

• 12” (305mm) standard neck length

• Unpainted


• Slim buckle height

• Fast and convenient

• Double wrapped for secure holding ability

Stainless Strapping Clamp Strapping Tool




Aluminium Pipe VAC-ALP75 75mm x 1.25m $71 +gst

VAC-ALP100 100mm x 1.25m $95 +gst


Pipe with Handles Attached

VAC-ALH75 75mm x 1.25m $POA



Pipe with Handles Attached




Tigerflex™ Clamps TIG-CLAMP4 4" $39.60 +gst

TIG-CLAMP6 6" $41.50 +gst

TIG-CLAMP8 8" $45.60 +gst

• Lightweight and sturdy aluminium, resistant to abrasion

• For suction and delivery of mineral oils, sludges, septic waste, water etc

• All temperatures

• 75mm and 100mm sizes

• For clockwise spiral hoses

• Designed to fit Tigerflex™ TR1 Hoses

• Air fittings can be fitted on request

HOSE AND PIPE

Aluminium Handles – attached to pipe

Tigerflex™ Clamps

Aluminium End Pipe

Zinc Plated Carbon Steel Spiral Double Bolt Clamps



Piranha Hose

HOSE AND PIPE

• High pressure sewer cleaning Applications for commercial, industrial and residential

• Tight pipe bends Slick, Slither® cover affords an easier handling hose to get the job done

• Jetting / lateral line Used for jetting equipment

Applications

Hose Temperature Range

Construction

Features & Advantages

Industry Standards

• For diameters of ½”, ⅝”, ¾”, 1”, 1¼” and 1½” -40°F (-40°C) to +150°F (+66°C)

• For diameters of ⅛”, ³⁄��”, ¼” and ⅜” -40°F (-40°F) to +160°F (+71°C)

• Inner tube Yellow Polyolefin (Sewer Cleaning Hoses, 2,500 and 3,000 PSI). Yellow Seamless Thermoplastic (Jetting / Lateral Line Hoses, 4,000 and 5,000 PSI)

• Reinforcement High tensile one or two synthetic fibre braids

• Cover Abrasion resistant polyether-urethane (standard)

• Slither® Polyether-urethane low coefficient of friction (optional)

• Materials Constructed to provide rugged and reliable service under the most severe and demanding conditions

• Yellow color tube Assures the user that they are using a WASTEC designated Piranha Hose product

• Polyolefin or seamless thermoplastic tube Provides maximum resistance to hydrolysis

• High tensile one or two synthetic fiber braids Contributes to low volumetric expansion and eliminates loss of strength from moisture absorption

• Abrasion resistant polyether-urethane Polyurethane cover provides exceptional cut, abrasion and fungus resistance

• Slither® cover Cover is ultra slippery; allows hose to maneuver around and through difficult sewer bends

• Pressure testing All Piranha factory assembled hoses are 100% pressure tested

• Reel installation Ideal for truck and trailer mounts

• Orange cover = 2,500 PSI

• Blue cover = 3,000 PSI

• Green cover = 4,000 PSI

• Black cover = 4,000 PSI (high burst)

• Red cover = 5,000 PSI



HOSE AND PIPE

Piranha Hose 2,500 PSI




Description Part # Size

Orange 2,500 PSI Sewer Jetting Hose

PIR-OR20 ¾”

PIR-OR25 1”

PIR-OR32 1¼”

PIR-OR38 1½”


Green 4,000 PSI Lateral Jetting Hose

PIR-GR06 ⅛”

PIR-GR08 ¼”

PIR-GR10 ⅜”

PIR-GR12 ½”


Blue 3,000 PSI Sewer Jetting Hose

PIR-BU20 ¾”

PIR-BU25 1”


Red 5,000 PSI Lateral Jetting Hose

PIR-RE08 ¼”

PIR-RE10 ⅜”

PIR-RE12 ½”

Sewer Jetting Hose

Lateral Jetting Hose

Sewer Jetting Hose

Lateral Jetting Hose• Indent order only

• Indent order only





HOSE AND PIPE

Amphibian™ AMPH™ Series

Ideal for:

• Agricultural dry fertilisers• Air seed liners• Fly ash collection• Hydro excavation• Industrial vacuum equipment• Material handling – heavy duty abrasive• Milling machine scrap recovery• Rock, gravel, sand and crushed concrete vacuuming• Sewer truck boom hose• Shot blast recovery• Slurry handling

• Triple resistant liner – abrasion resistant, water resistant, oil resistant

• Construction – PVC cover with polyurethane liner and rigid PVC helix

• Service temperature range – 40°C to 65°C*

* Actual service temperature range is application-dependent ^ OD measured over helix

** Available in 6m lengths only

Heavy Duty Polyurethane Lined Wet or Dry Material Handling Hose

Product ID (in)

ID (mm)

0D^ (in)

OD^ (mm)

Working pressure (PSI) 20°C

Vacuum rating (in Hg) 20°C

Temperature Weight (kg/m)

TIG-AMPH4 4 101.6 4.76 120.9 35 Full - 20° to 65°C 2.9

TIG-AMPH5 5 127.0 5.75 146.0 36 28 - 20° to 65°C 3.6

TIG-AMPH6 6 152.4 6.81 173 30 28 - 20° to 65°C 5.2

TIG-AMPH8** 8 203.2 9.18 233.2 30 28 - 20° to 65°C 8.8



Plastiflex – HI-VAC Hose

HI-VAC is the flexible hose used in a wide range of industrial applications where suction, crush and wear resistance are a must for a variety of environment as:

• Excavation and construction

• Machine to machine liquid or material transfers

• Tank or vat material liquid transfer

• Sanitary-cesspool to truck transfers

and many more…

The HI-VAC suction hose is ideal for the portable sanitation industry and is widely used by professionals.

All polyethylene construction (LDPE) makes HI-VAC corrosion resistant and extremely flexible, even at sub zero temperatures. Its strong profile construction offers a much longer durability with an incredibly low weight compared to rubber construction.

• Crushproof – will spring back to original shape after being crushed; it will not kink

• Smooth bore – smooth interior wall increases pump efficiency and decreases the blocking risk

• Wear resistant – cap resists wear and deterioration even in real tough environment

• Leak proof cuffs – very strong black overmolded cuffs for a long lasting leak proof and safe operation. Each hose and cuff unit is 100% factory tested

• Flexible – even at -40° F

Contact Allflow for pricing

Available dimensions: 2” – 50 ft (15.2m)

HOSE AND PIPE

ID (in) 0D^ (in) Approximate weight (lbs/ft)

Maximum recommended vacuum (Hg)

Maximum recommended PSI

Minimum centreline bending radius (in)

2.0 2.76 .85 29 15 3.5

Springs back to shape after forklift test

Integrated cuff for a safe jobSmooth interior for better flow efficiencyFatigue resistant web section – extremely flexible

Slack ribs protect against abrasion

1 2 3



HOSE AND PIPEHOSE AND PIPE

Tigerflex™ TR1 Hose SeriesHeavy Duty, Rubber Blend, Wet and Dry Vacuum Hose

Ideal for:

• Hydro Excavation

• Wet and dry vacuuming

• Abrasive material transfer

• Grain handling

• Sand / shot blast recovery line

• Roof rock cleaning

• Fly ash collection

• Milling machine metal chip recovery

• Road crush vacuuming

• Municipal vacuum trucks

• Superior rubber compounds Tigerflex™ uses specially engineered compounds which gives the ideal combination of light weight, flexibility, conductivity and superior long-lasting durability. Constructed of rubber blend hose with rigid PVC helix. Service temperature of - 40°C to 65.5°C*

* Actual service temperature range is application-dependent ^ OD measured over helix ** Based on Tigerflex™ test data

Product ID (in)

ID (mm)

0D^ (in)

OD^ (mm)

Working pressure (PSI)

Vacuum rating (in Hg)

Minimum bending radius (mm 20°C)

Standard lengths (m)

Weight (kg/m)

20°C 40°C 20°C 40°C

TR1-200 2 51 2.38 60.5 32 23 Full 26 38 30 0.75

TR1-300 3 76.2 3.56 90.5 28 20 Full 26 64 30 1.5

TR1-400 4 101.6 4.67 118.5 26 18 Full 26 114 30 2.5

TR1-600 6 153.4 6.88 174.8 19 13 28 24 241 30 4.8

A superior value compared to the other brands!

• Superior flexibility** – 15% better

• Smooth bore construction – eliminates material build-up inside

• Superior abrasion resistance** – 20% better

• Convoluted cover design – keeps hose flexible for easier handling and durability

• Conductive tube – specially formulated rubber blend



HOSE AND PIPE

Chemical Resistance Guide – Tigerflex™ TR1 Hose Series

This guide shows the resistance of chemicals to Tigerflex™ TR1 Hose and is based on material being handled at 68°F

WARNING: The Chemical Resistance Guide shown here is intended for general guidance only. The information contained therein is based upon information we believe to be reliable, but the accuracy or completeness thereof is not guaranteed. No warranty is expressed or implied, as specific application parameters, such as temperature, pressure and chemical concentrations vary widely. Furthermore, use of these hoses for handling multiple chemical products, either singly or as a mixture, may introduce uncontrollable factors relating to chemical resistance. Before using any hose, the user is responsible for determining the suitability of the hose for the intended application. Therefore, the user assumes all risk and responsibility for determining the suitability of any hose for handling any chemical or chemicals.

G = Good L = Limited U = Unsatisfactory

Material handled 68°F Material handled 68°F Material handled 68°F

1,1-dichloroethylene U Chromate (25%) U Methyl Ethyl Ketone (MEK) U

1,2-dichloroethane U Citric Acid G Mineral Oil U

Acetic Acid (10%) L Copper Chloride G Monochlorobenzene U

Acetone L Copper Nitrate G Nitric Acid (5%) U

Aluminum Acetate L Copper Sulfate L Nitric Acid (50%) U

Aluminum Chloride G Creosote Oil U Nitric Acid (70%) U

Aluminum Hydroxide G Dextrin G Nitric Acid (95%) U

Aluminum Sulfide L Dichlorobenzene U Nitrous Acid (10%) L

Ammonia (gas) G Dichloromethane U Oleic Acid U

Ammonia (liquid) G Diethyl Ether U Oxalic Acid L

Ammonium Acetate (conc.) G Emulsifier G Ozone U

Ammonium Bicarbonate G Ether L Paraffin U

Ammonium Chloride G Ethyl Acetate U Perchloroethylene U

Ammonium Hydroxide U Ethyl Alcohol (100%) G Phenol U

Ammonium Nitrate G Ethyl Alcohol (6%) G Phosphoric Acid (30%) U

Aniline U Ethylene Glycol G Potassium Bichromate U

Aniline Sulfate U Fluorine U Potassium Bromide G

Barium Chloride G Formaldehyde (40%) L Potassium Chloride G

Barium Hydroxide G Glycerol G Potassium Cyanide G

Beer L Grape Sugar G Potassium Fluoride G

Benzene U Hydrochloric Acid (10%) L Potassium Hydroxide (10%) L

Benzyl Alcohol U Hydrochloric Acid (20%) L Potassium Hydroxide (conc.) L

Bromine U Hydrochloric Acid (conc.) L Potassium Permanganate U

Butyl Alcohol G Hydrogen L Potassium Sulfate G

Calcium Carbonate G Hydrogen Chloride (anhydride) L Propylene Glycol L

Calcium Chloride (conc.) G Hydrogen Peroxide (3%) U Sake G

Calcium Chloride (in 20% mesh) G Hydrogen Peroxide (30%) U Salt Water G

Calcium Hypochlorite (15% Cl2) U Hydrogen Peroxide (80% or more) U Sodium Bicarbonate G

Calcium Hypochlorite (conc.) U Hydrogen Sulfide U Sodium Chloride G

Carbon Dioxide U Iodine U Sodium Hydroxide (10%) G

Carbon Monoxide L Iron Chloride G Sodium Hydroxide (conc.) G

Carbon Tetrachloride U Iron Sulfate G Soy Sauce G

Carbonic Acid L Isopropyl Alcohol L Stearic Acid L

Carbonic Acid Gas G Magnesium Carbonate G Sulfuric Acid (10%) U

Cetyl Alcohol L Magnesium Chloride G Tetrahydrofuran U

Chlorine (10% gas) U Magnesium Hydroxide L Toluene U

Chlorine (100% gas) U Magnesium Sulfate L Transformer Oil U

Chlorine (solution) U Methyl Alcohol (100%) G Water G

Chloroform U Methyl Alcohol (6%) G Zinc Chloride G



HOSE AND PIPE

Tigerflex™ Blue Hose Series(TB) EPDM Wet & Dry Suction Hose

Ideal for:

• Septic handling

• Liquid waste and slurries

• Liquid and dry chemicals

• Agricultural liquid and dry fertilisers

• Grains and seeds

• Water transfer

• Mining

• Construction

• Rental equipment

• Sewer cleaning

• Plant maintenance


• Enquire for more information

• Available on indent order

• 2.5” and 6” available

• Superior EPDM compounds – Tigerflex™ uses only the best available materials for superior hose chemical resistance, flexibility and durability. Made from black flexible EPDM rubber with bright BLUE polyethylene helix, Tigerflex™ Blue comes off the trucks more flexible and easier to handle than other similar hoses. Service temperature of - 40°C to 71°C**

• Superior flexibility – our tests show up to 22% more flexible than competition, especially in sub-zero weather!

• Weather resistant exterior – highly resistant to UV and weather extremes

• Lightweight – easy to handle and transport

• Specially designed abrasion-resistant helix – designed to slide easily over rough surfaces and around objects. Makes hose easier to handle and work with

• Smooth bore construction – eliminates material build-up inside

• Convoluted cover design – keeps hose flexible for easier handling and durability

Product ID (in)

ID (mm)

0D^ (in)

OD^ (mm)



Minimum bending radius (mm 20°C)


Weight (kg/m)

20°C 40°C 20°C 40°C

TIG-TB200 2 50.8 2.51 63.8 50 35 Full 28 127 30 1

TIG-TG250 2½ 63.5 3.07 78.0 45 30 Full 28 140 30 1.4

TIG-TB300 3 76.2 3.60 91.5 45 30 Full 26 178 30 1.7

TIG-TB400 4 101.6 4.70 119.5 40 25 Full 26 292 30 2.7

TIG-TG600 6 152.4 6.85 174.0 30 20 28 24 508 30 4.6

* ^ OD measured over helix ** Service life may vary depending on operating conditions and type of material being conveyed

Tigerflex™ Red Hose Series Tigerflex™ Green Hose Series

(TR) (TG)



Material handled 68°F 140°F Material handled 68°F 140°F Material handled 68°F 140°F

Acetic Acid G G Development Sol. L L Monochloro Benzene U U

Acetone G G Dextrin G G Nitric Acid - 5% L L

Aluminum Acetate G G Dichlorethylene U U - 50% L L

Aluminum Chloride G G Dichloro Benzene U U - 70% U U

Aluminum Hydroxide G G Diethyl Ether G G - 95% U U

Aluminum Sulfate G G Emulsifier G G Oleic Acid L L

Ammonia (Gas) G G Ether G G Ozone G G

Ammonia (Liquid) G G Ethyl Acetate L L Parraffin U U

Ammonium Acetate (conc.) G G Ethyl Alcohol - 6% G G Perchlorethylene U U

Ammonium Chloride G G - 100% G G Phenol L L

Ammonium Hydroxide G G Ethylene Chloride L L Phosphoric Acid - 30% G G

Ammonium Nitrate G G Ethylene Glycol G G Photosensitive Emulsion G G

Aniline L L Fluorine U U Potassium Bichromate U U

Aniline Sulfate U U Glycerol G G Potassium Bromide G G

Barium Chloride G G Grape Sugar G G Potassium Chloride G G

Barium Hydroxide G G Hormaminde - 40% G G Potassium Cyanide G G

Beer G G Hydrochloric Acid - 10% G L Potassium Fluoride G G

Benzen Alcohol L L - 20% G L Potassium Hydroxide - 10% G G

Benzene U U Concentrate G L - (conc.) G G

Bromine U U Hydrogen G G Potassium Permangante U U

Butyl Alcohol L L Hydrogen Chloride (anhydrous) G L Potassium Phosphate G G

Calcium Carbonate G G Hydrogen Peroxide - 3% U U Propylene Glycol G G

Calcium Chloride (conc.) G G - 30% U U Sake (Alcohol) G G

Calcium Hyprocholite (conc.) L L (above 80%) U U Salt Water G G

Carbon Monoxide G G Hydrogen Sulfide G G Suace G G

Carbon Tetracholoride L L Iodine U U Sodium Bicarbonate G G

Carbonic Acid G G Iron Chloride G G Sodium Chloride G G

Carbonic Acid Gas G G Iron Sulfate G G Sodium Hydroxide - 10% G G

Cetyl Alcohol L L Isopropyl Alcohol G G (conc.) G G

Magnesium Carbonate G G Sodium Hypocloride - 15% G G

Chlorine - 10% gas L L Magnesium Chloride G G Soy Sauce G G

- 100% gas L L Magnesium Hydroxide G G Stearic acid L L

(solution) L L Magnesium Sulfate G G Sulfur Dioxide U U

Chloroform U U Methanol - 20% G G Sulfuric Acid L L

Chromate (plating solution) L L Sulfurous Acid - 30% L L

Citric Acid G G Methyl Alcohol - 6% G G Tetrahydrofuron L L

Copper Chloride G G - 100% G G Toluene U U

Copper Nitratre G G Methyl Ethel Ketone G G Transformer Oil U U

Copper Sulfate G G Methylene Chloride L L Water G G

Creosote Oil U U Mineral Oil U U Zinc Chloride G G

Chemical Resistance Guide – TG, TR, TB

HOSE AND PIPE

This guide shows the resistance of chemicals to Tigerflex™ Hose Series: TG, TR, TB

G = Good L = Limited U = Unsatisfactory

WARNING: The Chemical Resistance Guide shown here is intended for general guidance only. The information contained therein is based upon information we believe to be reliable, but the accuracy or completeness thereof is not guaranteed. No warranty is expressed or implied, as specific application parameters, such as temperature, pressure and chemical concentrations vary widely. Furthermore, use of these hoses for handling multiple chemical products, either singly or as a mixture, may introduce uncontrollable factors relating to chemical resistance. Before using any hose, the user is responsible for determining the suitability of the hose for the intended application. Therefore, the user assumes all risk and responsibility for determining the suitability of any hose for handling any chemical or chemicals.



HOSE AND PIPE

Tigerflex™ Econo Hose

Tigerflex™ ORV Hose SeriesOil Resistant, PVC Hose

PVC Liquid Suction Hose

Ideal for:

• Light duty oil suction

• Oil slurry handling

• Recovery and transfer of hydrocarbon emissions

• Economy, lightweight hose

• Construction – Flexible PVC

• Service temperature range – 20°C to 65°C

• Special orange PVC formulation – Meets the requirements of controlled collection, recovery and transfer of hydrocarbon emissions

• Smooth PVC cover – Allows for ease of coupling

• Smooth bore construction – Allows unrestricted flow

• Service temperature range – 20°C to 65°C

Product ID (in)

ID (mm)

0D^ (in)

OD^ (mm)



Approximate bending radius (mm 20°C)


Weight (kg/m)

20°C 40°C 20°C 40°C

ORV075 ¾ 19.0 1.01 25.6 100 60 28 26 76 30 0.3

ORV100 1 25.4 1.26 32.0 80 50 28 26 76 30 0.4

ORV150 1½ 38.1 1.76 44.6 60 40 28 24 127 30 0.5

ORV200 2 50.8 2.32 59.0 60 40 28 24 178 30 0.8

ORV300 3 76.2 3.41 86.7 65 40 28 22 254 30 1.6

Product ID (in)

ID (mm)

Coil length (m)



Minimum bending radius (mm)

Weight (kg/m)

20°C 40°C 20°C 40°C

TIG-EG2 2 50.8 30.48 60 40 28 24 152.4 0.83

TIG-EG2.5 2½ 63.5 30.48 60 40 26 22 177.8 1

TIG-EG3 3 76.2 30.48 60 35 26 20 228.6 1.47

TIG-EG4 4 101.6 30.48 50 30 25 18 355.6 2.17



PVC HoseIndustrial Cleaning, Waste Management, Apollo SE

• Made in Italy

• Colour – light blue with an extruded red stripe

• Temperature range – - 25°C + 60°C

• Features – PVC hose reinforced with an anti-shock rigid PVC spiral. Special formulation particularly suitable to be used at low temperatures. Inside surface smooth, light corrugation outside. Strong and flexible, resistant to crushing, abrasion, atmospherical agents and most chemicals

• Applications – excellent for suction in general, particularly suitable to be used on tank trucks thanks to its physical-mechanical features

Product Ins. Ø (mm)

Min. wall thickness (mm)

Max. wall thickness (mm)

Weight (g/m)

Working pressure (bar)

Bursting pressure (bar)

Vacuum (m H2O)

Bending radius (mm)

Roll length (m)

Volume (m3)

MOR-SH3 76.2 4.6 6.2 1,700 3 9 9 310 30 0.655

MOR-SH4 100 4.8 8.0 2,650 3 9 8.5 410 30 0.783

HOSE AND PIPE



SIGNAGE

Signage

• Updated HAZCHEM tanker signage

• Add a touch of class to your tanker with Allflow plastic mudflaps

A. Hazchem Sign

E. Flexible PVC Door Document Holder

F. Printed Allflow Mudflap

B. Class 6 PVC Diamond C. Class 6 Sticker

D. Galvanised Diamond Holder

Code Part # Size $

A VACSIGNAGE1 400mm x 600mm $68.00 +gst

B VACSIGNAGE2 295mm x 295mm $19.40 +gst

C VACSIGNAGE3 400mm x 400mm $26.50 +gst

D VACSIGNAGE4 300mm x 300mm $20.65 +gst

E VACSIGNAGE5 240mm x 300mm $24.50 +gst

F VAC-MF 600mm x 600mm $36.45 +gst



CRUSTBUSTERS

Crustbuster Septic Tank Stirrer

The Crustbuster septic tank stirrer is the ultimate hand held, powerful stirrer for septic tanks, grease traps and car wash pits.

The power-head comes fully assembled and attaches to the shaft with a ⅜” allen head bolt. The 2-blade and 3-blade shafts are interchangeable with the power-head.

• Lightweight power-head features a durable 2.5hp, 720 RPM high speed transmission

• Mixes a 7,500 litre tank in less than 5 minutes. Mixes commercial and residential tanks up to 75,000 litres

• Eliminates the need to add hundreds of litres of water

• Choose from 2 (collapsible) blade or 3 blade models

• Interchangeable shafts with extensions available

• Foam gripped handles ensures grip is secure and easy on hands

• Saves wear and tear on vacuum pump and equipment

• One year warranty on power-head

Also available:

• Buster brackets (to mount to truck)

• Vinyl hood covers


Optional Crustbuster extensions



TRUCK VIBRATORS

A simple push of the button activates the vibrator. Hold for a few seconds until the load begins to move.

Our complete line of rugged, durable Truck Vibrators are tightly sealed against dirt, dust and water for long life in extreme conditions. Shielded, oversized, permanently lubricated ball bearings assure exceptional service life. High speed, low amp electric motors keep size and weight to a minimum for easy, low cost installation. Truck Vibrators bolt to a mounting plate welded to the frame to maximise vibration effectiveness.

Truck Vibrators

DC DC-3200

A 260

B 248

C 175

D 33

E 91

F 51

G 53

H 133

kg 16

Installation Kit

Typical Installation

• Each DC Installation kit includes 7.5m of cable

Cable Switch

TerminalsMounting plate

Bolts and washers

Solenoid

Push button switch

Timer (optional) Circuit breaker

(optional)

Battery

Solenoid

Vibrator

Cable

Cable

Cable

Ignition wire



Moro Suction Boom

SUCTION BOOMS

• 320 deg, rotating suction boom including all 24V electrical and hydraulic components

• Top mounted, 150 and 200mm suction boom with hydraulic rotation and air ram shut-off valve

• All the controls for valve, lift, parking brake and vacuum pump inversion are pneumatic

• Hydraulic control for extension, lift, lower and rotation of boom

• Radio control kit

• Made in Italy


320 deg. 4” Rotating Suction Boom including all 24V electric and hydraulic components MOR-SB4 100mm $22,650 +gst


4" & 6" dimensions



8” Moro Suction Boom

SUCTION BOOMS





• Air flow – 7200 l/min, 432 m3/hr, 254 CFM

• Power for maximum vacuum – 9kw

• Cast iron body guarantees reliability

• Oil pump ensures forced lubrication

• Kevlar vanes for high temperature resistance

• Improved vane angle for:

- Low noise

- Decreased heat

- Decreased oil consumption

- Increased vane surface area

- Minimal cylinder washboarding

• Low maintenance costs

• Reliability

• Vacuum / pressure valve

• Made in Italy

• Application areas – used in a wide spectrum of industrial environments such as mobile and truck mounted vacuum systems


The new WATER Series liquid cooled vacuum pumps represent the highest standard in vacuum technology. They have been built to provide reliable performance in the agricultural, septic and industrial fields. The WATER Series is comprised of three popular sizes and available in several drive configurations. All jacketed for liquid cooling circulation and built with the highest quality cast iron and Viton seals for maximum cooling efficiency and performance. The open port manifold design reduces heat and noise. These pumps come complete with a coolant circulation pump, direct feed positive displacement oiling system, non-return valve and change-over manifold.

Technical Data

Weight 156kg

Cont. duty vacuum 80%

Maximum vacuum 95%

Oil consumption 170gr/hr

Oil tank capacity 1.5L

Rotation speed 1,000 – 1,200 RPM

Maximum speed 1,400 RPM

Noise level 77dBA

VACUUM PUMPS

Moro PM 60WPWater Cooled Rotary Vane Vacuum Pump

Water Series (for direct transmission or pulley)

386

76 – 80 o 100

11

455

186

314364

420210210

Photo shown may vary slightly from actual product

205

627

197156291

50

Ø 35

534

582

205

All above dimensions in mm



VACUUM PUMPS

Moro PM 70APRotary Vane Vacuum Pump

• Air flow – 9,400 L/min, 564 m3/hr, 331 CFM

• Power for maximum vacuum – 11.5kw





- Low noise

- Decreased heat





• Reliability


• Made in Italy



The new AIR Series radiant cooled vacuum pumps represent the most elevated standard in vacuum technology. They have been built to provide reliable performance in the industrial sector. Thanks to their own technical characteristics, the new AIR vacuum pumps can also be employed in small industrial applications mounted on trucks. The applied technology is the way the radial rotary vanes operate.

The AIR flow range is currently comprised of 3 base pump models with different air courses that are available in various versions in accordance to the capacity required. The body of the pumps are cast iron that has been projected to guarantee maximum reliability and to favour the heat exchange. The air entry and exit ports have been optimised for minimal noise and maximum heat reduction. The correct operation of the pump is insured by the forced lubrication oil pump. The oil tank is also incorporated. The vanes supplied are for standard applications. A special inspection hole in the body of the pump allows a visual check to be carried out with ease. The non-return valve and the 4 way valve are integrated into the pump. The entry and exit elbows are flange coupling and can be directed in accordance to the final requirements of use. The new AIR Series models have been upgraded with an in-jet system to improve the heat exchange of the pump in heavy duty use. The industrialisation of the product has seen the new AIR range of vacuum pumps share almost all components.

Technical Data

Weight 185kg


Maximum vacuum 90%





Noise level 76dBA

Air Series (for direct transmission or pulley)

205 205

526

185

16

156220

50

561

558

Ø 35

Ø 76 – 80

11

386

154.5

213263

177177354





Moro PM 80AP

VACUUM PUMPS

Rotary Vane Vacuum Pump






• Improved vane angle for

- Low noise

- Decreased heat





• Reliability


• Made in Italy





Technical Data

Weight 162kg


Maximum vacuum 95%





Noise level 76dBA

Air Series (for direct transmission or pulley)

205 205

526

178

16

260213

50

651

558

Ø 35

Ø 76 – 80

11

386

154.5

213263

177177354











- Low noise

- Decreased heat





• Reliability


• Made in Italy





Technical Data

Weight 203kg

Cont. Duty Vacuum 80%

Max. Vacuum 95%

Oil Consumption 220gr/hr

Oil Tank Capacity 3.7L

Rotation Speed 1,000 – 1,200 RPM

Max. Speed 1,400 RPM

Noise Level 76dBA

Air Series (with hydraulic drive)

VACUUM PUMPS

Moro PM 80AHRotary Vane Vacuum Pump

Ø 76 – 80

Ø 25.4

386

213263

177177354

Ø 38.1

154.5

205205

491 261929

16

178

558











- Low noise

- Decreased heat





• Reliability


• Made in Italy




Technical Data

Weight 223kg


Maximum vacuum 95%





Noise level 79dBA

Water Series (with hydraulic drive)

Moro PM 80WH

VACUUM PUMPS

Water Cooled Rotary Vane Vacuum Pump


945260375

165

310

576

205205

622

16

Ø 76 – 80 o 100

11

449

180

210210420

364314




VACUUM PUMPS

Moro PM 110WHWater Cooled Rotary Vane Vacuum Pump







- Low noise

- Decreased heat





• Reliability


• Made in Italy




Technical Data

Weight 282kg


Maximum vacuum 95%





Noise level 80dBA

Water Series (with hydraulic drive)


972260324

165

390

629

205205

678

16

Ø 100

11

505

193

226226452

354304




• Manufactured in Denmark to very high standards for reliable operation

• Simple compact design

• Low noise level makes them ideal for indoor use and for trucks working in high density urban areas

• No maintenance contact in the pump, only water used as a seal

• Few spare parts mean low maintenance costs

Models Capacity

ME Series 50 m3 – 170 m3/hour

KE Series 140 m3 – 560 m3/hour

KL Series 280 m3 – 560 m3/hour

KS Series 350 m3 – 1,800 m3/hour

KM Series 1,400 m3 – 3,000 m3/hour

KV Series 2,500 m3 – 4,500 m3/hour

Samson Liquid Ring Vacuum Pumps

VACUUM PUMPS



VACUUM PUMPS

Samson KL400 Vacuum Pump

The Samson KL400 high vacuum liquid ring pump is designed for continuous operation in processes that demand high vacuum.

It uses the latest technology and is available in different material according to the application.

It has a compact design with only two connections which makes it easy to install and maintain.

The Samson KL400 high vacuum pump has the latest technology incorporated. It is produced and tested under strict and continuous quality control to ensure reliable operation.

• Range: vacuum 33mbar

• Capacity: up to 500 m3/h

• Power: 7 – 37kw

• Compact design

• Built-in manifold design

• Only two connection points

• Mechanical shaft seals with different sealing materials

• Wide applicability

• Few components

• Long life time cycle


• Cost effective performance

• Reliability and flexibility

• Low noise emission

• Vacuum and pressure

• Made in Denmark

• Application areas – used in a wide spectrum of industrial environments such as processing, food and fishing industry


1 Pumps with ATEX Certificate, maximum temperature 80°C 2 Pumps with ATEX Certificate, maximum temperature 50°C

Technical Data

Weight 100kg

Sound pressure 70 dBA

Test pressure 5bar, g

Rotation speed range 1,200 – 1,750 RPM

1 Gas temperature (maximum) 120°C

2 Service liquid temperature (maximum) 90°C

Bearing greasable Ball

Pump colour 5021 RAL

Capacity Up to 500 m3/h 8,333 L/min (295CFM)

Proven Technology

315

175

355

16 16240

293

542

60

15

136.5 305

15

375

DC=Ø125

Ø30Ø50

Ø18




Samson KL400 Vacuum Pump

VACUUM PUMPS

Vacuum Performance

Performance, dry air

The performance is based on a constant sealing water pressure on 1,2 barg. The Flow F depends on the working pressure P

F[m3/h]=3,5-P[mbar] 400

Power consumption

Air temperature 20°C

Sealing water temperature 15°C

Tolerance +/– 10%

Correction factor based on sealing liquid temperature

Qt=Q15 *K

Pump performance at temperature of sealing liquid higher than 15°C

100 200 400 600 800 mbar abs

1,750 RPM

1,450 RPM

1,200 RPM

0

30 40 50 60 70 80

100

200

300

400

500

Q15m3/h

0

200 400 600 800 mbar

3

6

9

12

15

kW

1,750 RPM

1,450 RPM

1,200 RPM

0

10 100mbar

0.2

0.4

0.6

0.8

1.0

K1

15°C

20°C

30°C

40°C

50°C

Cavitation limits

1000




VACUUM PUMPS

Samson KS725 Liquid Ring Vacuum Pump

SAMSON PUMPS Liquid Ring Vacuum Pump KS725 is designed to meet the demands in continuous and rough areas and wet processes. The pump can be adapted to a specific working process and has special advantages when used in explosion proof environments. The KS725 is as standard equipped with fully welded stainless steel rotor and shaft and mechanical shaft seals ensuring a long life and low operating costs.

With the latest technology incorporated, the KS725 is produced and tested under strict and continuous quality control to ensure a reliable operation.

• Range: 100 to 3,000 mbar

• Capacity: up to 850 m3/h

• Power: 11 – 40kw

• Stainless steel rotor and shaft

• Mechanical shaft seals

• Wide applicability with few components

• Choice of materials







• Made in Denmark

• Application areas – used in a wide spectrum of industrial environments such as processing, food and fishing industry, transport and off-shore

• No use of oil! The liquid ring pump is 100% oil free and operates solely on water

• ATEX Certified (zone 1) – KS725 is ATEX Certified (zone 1) for operating in potentially explosive atmospheres


Technical Data

Weight (excluding branch pipes) 209kg

Sound pressure 78 – 80 dBA







Capacity Up to 850 m3/h 14,200 L/m (500 CFM)

Proven Technology

DC ø80 ø13

66

ø35

320

400¾”

0

249

472

579.3

295

475186

383

782




VACUUM PUMPS

Samson KS725 Liquid Ring Vacuum PumpVacuum Performance

Performance Sealing water consumption



Performance based on dry air at 1013 mbar

Tolerance +/– 10%

Consumption at no recovery

Power consumption Correction factor based on sealing liquid temperature

Qt=Q15 *K


0

10 100mbar

0.2

0.4

0.6

0.8

1.0

K1

20°C

30°C

40°C

50°C Cavitation limits

1000

0

200 400 600 800

150

300

450

600

750

900

Q15m3/h

mbar

1,750 RPM

1,450 RPM

1,000 RPM

0

200 400 600 800

1.5

2.0

2.5

3.0

3.5

4.0

m3/h

mbar

0

200 400 600 800 mbar

10

20

30

40

50

60

kW

1,750 RPM

1,450 RPM

1,000 RPM




VACUUM PUMPS

Samson KS1025 Liquid Ring Vacuum Pump

SAMSON PUMPS Liquid Ring Vacuum Pump KS1025 is designed to meet the demands in continuous and rough areas and wet processes. The pump can be adapted to a specific working process and has special advantages when used in explosion proof environments. The KS1025 is as standard equipped with fully welded stainless steel rotor and shaft and mechanical shaft seals ensuring a long life and low operating costs.

With the latest technology incorporated, the KS1025 is produced and tested under strict and continuous quality control to ensure a reliable operation.


• Capacity: up to 1,300 m3/h

• Power: 15 – 55kw











• Made in Denmark

• Application areas – used in a wide spectrum of industrial environments such as processing, food and fishing industry, transport and off-shore

• No use of oil! The liquid ring pump is 100% oil free and operates solely on water



Technical Data

Weight (excluding branch pipes) 228kg








Capacity Up to 1,300 m3/h 21,667 L/m (765 CFM)

Proven Technology

DC ø80 ø13

66

ø45

320

400¾”

0

249

472

579.3

295

615186

523

922




VACUUM PUMPS

Samson KS1025 Liquid Ring Vacuum PumpVacuum Performance

Performance



Performance based on dry air at 1013 mbar

Tolerance +/– 10%

Power consumption Correction factor based on sealing liquid temperature

Qt=Q15 *K


0

10 100mbar

0.2

0.4

0.6

0.8

1.0

K1

20°C

30°C

40°C


1000

0

200 400 600 800

200

400

600

800

1,000

1,200

Q15m3/h

mbar

1,750 RPM

1,450 RPM

1,000 RPM

Sealing water consumption

Consumption at no recovery

mbar

0

200 400 600 800

1.5

2.0

2.5

3.0

3.5

4.0

m3/h

0

200 400 600 800 mbar

10

20

30

40

50

60

kW

1,750 RPM

1,450 RPM

1,000 RPM



Technical Data

Weight (including branch pipes) 450kg



Rotation speed range 800 – 1,500 RPM

Gas temperature (maximum) 120°C

Service liquid temperature (maximum) 90°C

ATEX, service liquid temp (maximum) 50°C



Connection water supply Nipple hose 5/4” / ø32

Capacity Up to 3,000 m3/h 50,000 L/m (1,767 CFM)

SAMSON PUMPS Liquid Ring Vacuum Pump KM2700 is designed to meet the demands in continuous and rough areas and wet processes. The pump can be adapted to a specific working process and has special advantages when used in explosion proof environments. The KM2700 is as standard equipped with fully welded stainless steel rotor and shaft and mechanical shaft seals ensuring a long life and low operating costs.

With the latest technology incorporated, the KM2700 is produced and tested under strict and continuous quality control to ensure a reliable operation.


• Capacity: 1,100 to 3,000 m3/h

• Power: 100kw











• Made in Denmark

• Application areas – Used in a wide spectrum of industrial environments such as processing, food and fishing industry, transport and off-shore

• No use of oil – The liquid ring pump is 100% oil free and operates solely on water



Proven Technology

VACUUM PUMPS

Samson KM2700 Liquid Ring Vacuum Pump

580

280380665

DCØ210Ø1254xM16

Outlet (cw rotation)

Outlet (cw rotation)

1235

775

140 Ø60K6

315

310740

5/4” -Ø32

Inlet (ccw rotation)

(Water supply)

Inlet (ccw rotation)




VACUUM PUMPS

Samson KM2700 Liquid Ring Vacuum PumpVacuum Performance

Performance



Performance based on dry air at 1013 mbar absolute

Tolerance +/– 10%

Correction factor based on sealing liquid temperature

Qt=Q15 *K


Performance and power consumption are based on a constant operation media pressure at +/– 0.2 bar gauge. Deviations will affect the performance and power consumption.

Using a liquid separator from Samson Pumps the amount of water will be regulated automatically depending on the operating pressure. At the same time the water will be reused and will reduce the costs of operation.

If operating without liquid separator the pump must be supplied with 1.0 m3/h as a minimum in considerations to lubrication and cooling of the mechanical shaft seals.

0

200 400 600 800 mbar, absolute

500

1,000

1,500

2,500

2,000

3,000

Q15m3/h

1,480 RPM

1,180 RPM

800 RPM

Power consumption

Vacuum operation

0

10 100mbar

0.2

0.4

0.6

0.8

1.0

K1

20°C

30°C

40°C


1000

mbar, absolute

0

200 400 600 800

20

40

60

80

100

110

kW

15°C

1,480 RPM

1,180 RPM

800 RPM



VACUUM PUMPS

Kaiser Water Ring Vacuum Pump

• Intake-press junction

• Pump body made of aluminium

• Hydraulic motor

• Intercooler connection

• Function As early as the mid-1980s, KAISER developed the first water ring pump in a light construction for mobile applications. In the KWP housing, an eccentric rotor produces a ring of water using centrifugal power. Volume changes in the rotor chambers ensure that air is sucked in and compressed. This construction type features high resistance to dirt particles and is ideally suited to vacuuming wet and dry media. The contact-free rotor ensures extremely quiet running and a long life cycle. The KWP causes no contamination of the pump exhaust air by lubricants and oils. The oil-bath bearings require no maintenance.

• Light-weight and reliable The light construction increases the vehicle’s useful load. The integrated intercooler system ensures a consistently low temperature budget for the service water. Even in the case of high exterior temperatures, continuous operation is possible and even extended vacuuming jobs in the end vacuum range result in no overheating of the KWP.

• Mounting in the fresh water chamber – patented By building the KWP into the fresh water chamber, additional natural cooling, frost protection via water insulation and reinforced sound insulation are achieved. The short suction lines to the sludge tank ensure an optimum degree of efficiency. This construction type also permits vacuum / pressure operation when tilted.

Product Maximum air flow in m3/h

Maximum air flow in CFM

Maximum vacuum rate in % (in Hg)

Maximum pressure in bar (PSI)

Weight in kg (lb)

900i 900 530 90 (26.6) 1 (14.5) 95 (209)

1600i 1,600 943 90 (26.6) 1 (14.5) 180 (397)

2000i 2,000 1,178 90 (26.6) 1 (14.5) 180 (397)

2400i 2,400 1,414 85 (25.1) 1 (14.5) 210 (463)

3100i 3,100 1,825 85 (25.1) 1 (14.5) 210 (463)

7000i 7,000 4,120 80 (23.6) 1 (14.5) 650 (1433)

06/07Components and technologies

KAISER water ring pump - KWP Vacuum pump

KWP in fresh water chamber

Eccentric rotor

FunctionAs early as the mid-1980s, KAISER developed the first water ring pump in a light construction for mobile applica-tions. In the KWP housing, an eccentric rotor produces a ring of water using centrifugal power. Volume changes in the rotor chambers ensure that air is sucked in and com-pressed. This construction type features high resistance to dirt particles and is ideally suited to vacuuming wet and dry media. The contact-free rotor ensures extremely quiet running and a long life cycle. The KWP causes no contamination of the pump exhaust air by lubricants and oils. The oil-bath bearings require no maintenance.

Light-weight and reliableThe light construction increases the vehicle’s useful load. The integrated intercooler system ensures a consistently low temperature budget for the service water. Even in the case of high exterior temperatures, continuous operation is possible and even extended vacuuming jobs in the end vacuum range result in no overheating of the KWP.

Mounting in the fresh water chamber - patentedBy building the KWP into the fresh water chamber, addi-tional natural cooling, frost protection via water insulation and reinforced sound insulation are achieved. The short suction lines to the sludge tank ensure an optimum degree of efficiency. This construction type also permits vacuum/pressure operation when tilted.

Components and technologies

Technical data

KWP vacuum pump 900i 1600i 2400i 7000i2000i 3100i

Max. air flow in m3/h 900 1600 2400 70002000 3100

Max. air flow in cfm 530 943 1414 41201178 1825

Max. vacuum rate in % 90 90 85 80(in Hg) (26.6) (26.6) (25.1) (23.6)

Max. pressure in bar (PSI) 1 (14.5) 1 (14.5) 1 (14.5) 1 (14.5)

Weight in kg (lb) 95 (209) 180 (397) 210 (463) 650 (1433)

Intake-press junction

Hydraulic motor

Pump body made of aluminium

Intercooler connection

Kaiser-Broschuere_Innenteil_E_140415_RZ.indd 7 14.04.15 10:41

KWP in fresh water chamber




VACUUM PUMPS

Power Diagram for KWP2000i

• Inlet medium: Steam saturated air at 20°C

• Working fluid: Water at 20°C

• Outlet pressure: 1,013 mbar (30” mercury)

• Allowance: Drive power + / – 10%

• Allowance: Suction capacity + / – 10%

0

0 0

0%

100 3

10%

200 6

20%

300 9

30%

400 12

40%

500 15

50%

600 18

60%

700 21

70%

800 24

80%

mbar Inches of mercury

%

Vacuum

120200

235400

350600

470800

5901,000

7051,200

8251,400

9401,600

1,0601,800

1,1802,000

1,2902,200

(CFM)(m3/h)

1,350 RPM

1,200 RPM

1,100 RPM

1,000 RPM

900 RPM

900 27

90%

0

0 0

0%

100 3

10%

200 6

20%

300 9

30%

400 12

40%

500 15

50%

600 18

60%

700 21

70%

800 24

80%


%

14

27

41

54

68

82

9570

60

50

40

30

20

10

(hp)(kW)

900 RPM

900 27

90%

1,350 RPM

1,200 RPM

1,100 RPM

1,000 RPM

Vacuum

Required power

Suction capacity



VACUUM PUMPS








0

0 0

0%

100 3

10%

200 6

20%

300 9

30%

400 12

40%

500 15

50%

600 18

60%

700 21

70%

800 24

80%


%

Vacuum

120200

235400

350600

470800

5901,000

705

825

940

1,060

1,200

1,400

1,600

1,800

1,180

1,290

1,410

1,530

1,650

2,000

2,200

2,400

2,600

2,800

1,760

1,880

3,000

3,200

(CFM)(m3/h)

1,350 RPM

1,200 RPM

1,100 RPM

1,000 RPM

900 RPM

900 27

90%

0

0 0

0%

100 3

10%

200 6

20%

300 9

30%

400 12

40%

500 15

50%

600 18

60%

700 21

70%

800 24

80%


%

14

27

41

54

68

82

95

109

122

136

150

70

80

90

100

110

60

50

40

30

20

10

(hp)(kW)

900 RPM

900 27

90%

1,350 RPM

1,200 RPM

1,100 RPM

1,000 RPM

Vacuum

Required power

Suction capacity

at mechanical drive

at hydr. controlled drive



VACUUM PUMPS








0

0 0

0%

100 3

10%

200 6

20%

300 9

30%

400 12

40%

500 15

50%

600 18

60%

700 21

70%

800 24

80%


%

Vacuum

235400

470800

7051,200

9401,600

1,1802,000

1,410

1,650

1,880

3,600

2,400

2,800

3,200

3,600

2,350

2,590

2,820

3,060

3,290

4,000

4,400

4,800

5,200

5,600

3,530

3,760

4,000

4,230

6,000

6,400

6,800

7,200

(CFM)(m3/h)

750 RPM

700 RPM

600 RPM

500 RPM

900 27

90%

0

0 0

0%

100 3

10%

200 6

20%

300 9

30%

400 12

40%

500 15

50%

600 18

60%

700 21

70%

800 24

80%


%

27

54

82

109

136

163

190

218

245

272

140

160

180

200

120

100

80

60

40

20

(hp)(kW)

500 RPM

900 27

90%

750 RPM

700 RPM

600 RPM

Vacuum

Required power

Suction capacity



Condé Petrol ProVac Portable Vacuum Tanker

Technical Data

Dimensions 610W x 1,270L x 1,143H

Weight 114kg

Motor 3hp, 4 stroke, petrol

Pump Condé Provac 3, 35 CFM

Operating vacuum 16”Hg

Operation pressure 5 PSI

Pull down time 12 seconds

Intake flow 450 litres per minute

Noise level 69dBA @ 3m

Tank volume shut-off 230 L

Condé HD Vacuum / Pressure Pumps are the market leaders in the smaller vacuum pumping market in North America.

They build a variety of pumps with sizes ranging from 35 to 230 CFM for vacuum tanks from 200 to 9,500 litres.

The Condé ProVac Industrial Pumpout Units are an amazing portable aluminum vacuum unit built in USA and specially designed for all those small, hard to get jobs. The unit is powered by a Honda GX100QA2, pull start engine and a 35 CFM vacuum pump. With a single lever to change from vacuum to pressure, they are the latest innovation for easy one person operation of small clean up jobs. With an all-in-one mini vacuum tanker operation, there is no more long lengths of hoses to reel out, or have the cost of a large vacuum truck on site, all for the sake of a few litres.

• Single person operation

• Lightweight aluminium

• Condé ProVac pump (35 CFM)

• 3hp

• User friendly/easy access front controls

• 610mm wide fits through any standard door

• 1,143mm height fits through cargo van door

• Hand/parking brake

• Toolbox

• Primary, secondary traps and pump pre-filter

• Hose rack and tool holder

• 50mm x 3m plastiflex suction hose with wand

• 152mm cleanout hatches, top and bottom

• Heavy duty wheels and front castors

• 450 litre per minute pumping capacity

• Made in the USA


Optional Extra Transportation Platform

Condé HD Vacuum/Pressure Pumps are the market leaders in the smaller vacuum pumping market in North America. They build a variety of pumps with sizes ranging from 35 to 230CFM for vacuum tanks from 200 to 9500 litres.

Freephone: 0800 255 3569 www.allflow.co.nz [email protected]

..... Please phone for introductory offer ......

Condé ProVac Industrial Pumpout Station

Condé ProVac Transportation Platform(available as an extra)

PORTABLE VACUUM TANKER - for all those small jobs -

Petrol ProVac

• Lightweightaluminium

• CondéProVacpump(35CFM)

• 3hp

• Userfriendly/easyaccessfrontcontrols

• 610mmwidefitsthroughanystandarddoor

• 1143mmheightfitsthroughcargovandoor

• Hand/parkingbrake

• Toolbox

• Primary,secondarytrapsandpumppre-filter

• Hoserack&toolholder

• 50mmx3mplastiflexsuctionhosewithwand

• 152mmcleanouthatches,top&bottom

• Heavydutywheelsandfrontcastors

• 450litreperminutepumpingcapacity

The Condé ProVac Industrial Pumpout Units are an amazingportablealuminumvacuumunitbuiltinUSAandspeciallydesignedforallthosesmall,hardtogetjobs.TheunitispoweredbyaHondaGX100QA2,pullstartengineanda35CFMvacuumpump.Withasinglelevertochangefromvacuumtopressure,theyarethelatestinnovationforeasyonepersonoperationofsmallcleanupjobs.Withanall-in-oneminivacuumtankeroperation,thereisnomorelonglengthsofhosestoreelout,orhavethecostofalargevacuumtruckonsite,allforthesakeofafewlitres.

VACUUM PUMPS



VACUUM PUMPS

PORTABLE VACUUM for Indoor Grease Trap Cleaning

Freephone: 0800 255 3569 www.allflow.co.nz [email protected]

..... Please phone for introductory offer ......

TECHNICAL SPECIFICATIONS

Dimensions: 610W x 1270L x 1143H

Weight: 114Kg

Motor: 1.5hp, 230V

Pump: Condé Provac 3, 35CFM

Operating Vacuum: 16”Hg

Operation Pressure: 5 PSI

Pull Down Time: 12 Seconds

Intake Flow: 450 Litres Per Min

Noise Level: 69dBA @ 3 Metres

Tank Volume Shut Off: 230 Litres

Single person operation

Complete with odour control

(Pump grease traps at midday!)

Optional Extra Transportation Platform

Condé Portable Vacuum – Indoor grease trap cleaning

Technical Data

Dimensions 610W x 1,270L x 1,143H

Weight 114kg

Motor 1.5hp, 230V

Pump Condé Provac 3, 35 CFM

Operating vacuum 16”Hg

Operation pressure 5 PSI

Pull down time 12 seconds

Intake flow 450 litres per min

Noise level 69dBA @ 3m

Tank volume shut-off 230 L

Condé HD Vacuum / Pressure Pumps are the market leaders in the smaller vacuum pumping market in North America.

They build a variety of pumps with sizes ranging from 35 to 230 CFM for vacuum tanks from 200 to 9,500 litres.

The Condé ProVac Industrial Pumpout Stations are an amazing portable aluminum vacuum unit built in USA and specially designed for the pumping of indoor grease traps. The unit runs on a standard 230V plug powering a 9 amp, 1.5hp motor and a 35 CFM vacuum pump. With a single switch to change from vacuum to pressure, built in charcoal odour neutralizer, they are the latest innovation for those hard to reach grease traps. With a single person operation, there is no more long lengths of hoses to reel out all for a couple of hundred litres, and best of all, no more hoses to drag across restaurant carpets and floors!

• Single person operation

• Complete with odour control

• Lightweight aluminium

• Condé ProVac pump (35 CFM)

• 1.5hp

• User friendly / easy access front controls

• 610mm wide fits through any standard door

• 1,143mm height fits through cargo van door

• Hand / parking brake

• Exhaust deodoriser

• 7m retractable cord reel

• Hose rack and tool holder

• 50mm x 3m plastiflex suction hose with wand

• 152mm cleanout hatches, top and bottom

• Heavy duty wheels and front castors

• 450 litre per minute pumping capacity

• Made in the USA




Condé HD Vac / Press Pumps

Conde HD Vacuum / Pressure Pumps are built in a variety of sizes from 35 to 230 CFM for vacuum tanks from 200 to 9,500 litres. All Conde HD pumps incorporate the unique Conde Slide Valve change-over valve which is compact, low profile and always works easily. Conde automatic oilers never need adjustment. All pumps can be driven by a variety of power sources including gas engines, PTO, Right Angle Drive, or hydraulic pump. All pumps are double shafted and can easily be set up for either CW or CCW rotation. Sealed bearings require no maintenance. SDS 6, Super 6, and ProVac 3 pumps even include built-in vacuum relief valve!

• Speed range: 1200 – 1750 RPM

• Maximum vacuum: 28”Hg Intermittent

• Lubrication: Conde automatic

• Maximum pressure: 20 PSIG

• Made in the USA


Description Part # Ideal tank capacity Port size Shaft size Weight

SDS Ultra Vac / Press with oiler HD12ULTDF91 4,500 – 9,500 L 1½” 1⅛” 77kg

SDS 12 Vac / Press with oiler HD12SDSDF91 4,000 – 7,500 L 1½” 1⅛” 75kg

SDS 6 Vac / Press with oiler HD06SDSDF91 2,000 – 4,000 L 1½” 1” 52kg

Super 6 Vac / Press with oiler HD06SSDF91 1,000 – 2,000 L 1¼” 1” 41kg

ProVac 3 Vac / Press with oiler HD03PV91 200 – 1,000 L 1” ¾ 23kg

SDS Ultra Vac / Press with oiler · 230 CFM SDS 12 Vac / Press with oiler · 180 CFM

SDS 6 Vac / Press with oiler · 115 CFM Super 6 Vac / Press with oiler · 70 CFM ProVac 3 Vac / Press with oiler · 35 CFM

VACUUM PUMPS



VACUUM PUMPS

Condé Vacuum Only Pumps

Conde Vacuum Only pumps are available in a wide range of sizes from 20 to 230 CFM. Conde vacuum only pumps offer a great economical alternative for those who do not require pressure off-loading on their pumps. Can be driven from a variety of power sources. Automatic oiling system requires no adjustment or maintenance. End thrust protection is standard on all Conde pumps as well as maintenance free sealed bearings.

Did you know? All Conde pumps are bench tested for at least forty minutes under operating vacuum before they every leave our plant.

• Speed range: 1200 – 1750 RPM

• Maximum vacuum: 28”Hg intermittent

• Lubrication: Conde Automatic

• Made in the USA


Description Part # Ideal tank capacity Port size Shaft size Weight

SDS Ultra Vacuum Only with oiler OL12ULTDF91 4,500 – 9,500 L 1½” 1⅛” 73kg

SDS 12 Vacuum Only with oiler OL12SDSDF91 4,000 – 7,500 L 1½” 1⅛” 68kg

SDS 6 Vacuum Only with oiler OL06SDSDF91 2,000 – 4,000 L 1½” 1” 45kg

Super 6 Vacuum Only with oiler OL06SSDF91 1,000 – 2,000 L 1¼” 1” 37kg

ProVac 3 Vacuum Only with oiler OL03PV91 200 – 1,000 L 1” ¾ 18kg

SDS Ultra Vacuum Only with oiler · 230 CFM

SDS 6 Vacuum Only with oiler · 115 CFM

ProVac 3 Vacuum Only with oiler · 35 CFM

Super 6 Vacuum Only with oiler · 70 CFM

SDS 12 Vacuum Only with oiler · 180 CFM



Condé Pump Drive Systems

• Hydraulic Drive Bracket The Conde Hydraulic Drive Bracket is a CNC machined bracket that allows for perfect alignment of the pump and hydraulic motor. Connect vacuum pump to hydraulic pump with direct drive coupling. For SDS 12 and SDS 6 pumps with special machined end plate.

• Conde Right Angle PTO Drive Complete Right Angle Drive system includes sturdy base, right angle gear box, direct drive coupling, mounted with the SDS pump of your choice. Easy bolt on installation to truck frame. Can accommodate either vacuum / pressure or vacuum only SDS pumps. Order both the right angle drive Part #. below, and the pump of your choice.

• Right Angle Drive Base Conde Right Angle Drive Base is CNC machined for extra strength. Painted with Amerlock for ultimate protection. Right angle drive guard included.

• Superior RA Drive Superior right angle drives are the standard of the industry.

• Made in the USA


Description Part #

SDS Hydraulic Drive Bracket HDSDS12BR

Conde Right Angle PTO Drive LWRADR

Right Angle Drive Base lWRDRIVE

Superior RA Drive LWRADRGB

Direct Drive Coupling – 1” flange PUCFL6J1 / PUCFL7J1

Direct Drive Coupling – 1⅛” flange PUCFL6J118 / PUCFL7J118

Direct Drive Coupling – rubber insert PUCSL6JE / PUCSL7JS

SDS Hydraulic Drive Bracket

Conde Right Angle PTO Drive

Direct Drive Coupling

Superior RA DriveRight Angle Drive Base

VACUUM PUMPS



VACUUM PUMPS

Condé Powerpaks

Conde PowerPaks are state of the art preassembled gasoline powered vacuum pump units. Easy to install; simply bolt down and attach to your tank. Diamond plate base trim and belt guard insure that your unit looks as good as your rig. Rigid assembly insures minimum vibration and maximum power. Conde PowerPaks are available with either vacuum / pressure HD pumps, or economical vacuum only pumps. Our wide range of CFM sizes insure you will get the right pump unit for your size tank and application. Because these units are so easy to install, they can be transferred with ease to another tank system when needed. All units are powered with Honda GX Commercial Series Engines. SDS Ultra unit is powered with the Briggs Vanguard Twin.

• Made in the USA


Description Part #

SDS Ultra Vac / Press with 18 hp Briggs El. St. HDUNSDSULT18

SDS Ultra Vacuum Only with 18 hp Briggs El. St. OLUNSDSULT18

SDS 12 Vac / Press with 13 hp Honda El. St. HDUN12SDS13E

SDS 12 Vacuum Only with 13 hp Honda El. St. OLUN12SDS13E

SDS 6 Vac / Press with 9 hp Honda El. St. HDUN06SDS09E

SDS 6 Vacuum Only with 9 hp Honda El. St. OLUN06SDS09E

Super 6 Vac / Press with 5.5 hp Honda El. St. HDUN06SSO5ES

Super 6 Vacuum Only with 5.5 hp Honda El. St. OLUN06SSO5ES

ProVac 3 Vac / Press with 5.5 hp Honda El. St. HDUN03PVO5ES

ProVac 3 Vacuum Only with 5.5 hp Honda El. St. OLUN03PVO5ES

ProVac 3 Vacuum Only with 4 hp Pull St. Honda OLUN03PV3PS

Estimated Tank Pull Down Time (15" Hg) in seconds

Tank capacity SDS Ultra SDS 12 SDS 6 Super 6 ProVac 3

370 L - - - 18 16

950 L - - - 17 37

1,100 L - - - 25 50

1,500 L - - - 34 64

1,900 L - 16 26 52 84

2,800 L - 24 40 - -

3,800 L 25 32 53 - -

5,600 L 39 50 80 - -

7,500 L 52 67 106 - -

9,500 L 65 - - - -

SDS Ultra HD PowerPak

Ideal for tank sizes 4,500 – 9,500 litres

SDS 12 HD PowerPak


SDS 6 HD PowerPak




Condé Powerpaks

Condé Diesel Powered Units

Conde Diesel Powered Vacuum Pump Units are ideal for applications where sparking is not permitted or diesel power is simply preferred. We use only quality Yanmar air cooled engines on our units. Available in sizes from 6 to 10 hp with pull or electric start. Diesel engine power is available on all of our vacuum pump units from the Model 3 to the SDS 12.

• Made in the USA


Super 6 HD PowerPak

Ideal for tank sizes 1,000 – 2,000 litresProVac 3 HD PowerPak

Ideal for tank sizes 200 – 1,000 litres

Super 6 with 6 hp Yanmar El. St. Diesel

VACUUM PUMPS

(Continued) • See info on previous page



VACUUM PUMPS

Condé Pump Oilers

• Aluminum Shaft Mount Oiler Mounts on to shaft of the pump and can be set up on either end of pump for CW or CCW rotation

• Large Capacity Remote Oiler Oiler can be installed in a convenient location for easy maintenance. Can be used with the Super 6, SDS 6, SDS 12 or SDS Ultra. Super pumps use twin oiler top, SDS triple

• Shaft Mount Super 6 Oiler Compact design mounts to pump end plate and can be used for either CW or CCW rotation. Ideal when space is a concern

• Model 6 Oiler Pump mount oiler for the Model 6 pump with two wick oilers

• Model 3 Oiler Pump mount oiler for the Model 3 pump with wick oiler

• Firewall Oiler For use with Super 6 under the hood pumps

• Made in the USA


Quick Guide to Recommended Pump Components

For Conde Pumps ProVac 3 Super 6 SDS 6 SDS12 SDS Ultra

Airflow of pump @ 0”Hg 35 70 115 180 230

Primary Shut-Off (aluminium) LWTRPV3A LWTRP01 LWTRP01 LWTRP01 LWTRP01

Primary Shut-Off (stainless) LWTRPV3SS LWTRP03 LWTRP03 LWTRP03 LWTRP03

Primary Shut-Off (steel) LWTRPV3 LWTRP02 LWTRP02 LWTRP02 LWTRP02

Secondary Moisture Trap LWTR02 LWTRM01SS LWTRM01SS LWTRM01SS LWTRM01SS

Oil Catch Muffler MFOC3 MFOC3612 MFOC3612 MFOC3612 MFOC3612

Final Filter LWTRPF1 LWTRPF150 LWTRPF150 LWTRPF150 LWTRPF150

Protection Package LWPKG2 LWPKG1 LWPKG1 LWPKG1 LWPKG1

Flush Kit KITFLUSH KITFLUSH KITFLUSH KITFLUSH KITFLUSH

Vacuum Relief Valve RVP10 RVP13 RVP13 RVV03 RVV03

Pressure Relief Valve RVP10P RVPBP RVP13P RVP13P RVP13P

Vacuum Gauge Liq. Filled GAGE010 GAGE010 GAGE010 GAGE010 GAGE010

Vac / Press Gauge Liq. Filled GAGE012 GAGE012 GAGE012 GAGE012 GAGE012

Swing Check Valve PFCV075 PFCV125 PFCV150 PFCV150 PFCV150

Remote Slide Valve SVAL061 SVAL06114 SVAL0115 SVAL0115 SVAL0115

Gas Unit Belt BLTAX40 BLTBX48 BLTBX45 BLTBX48 BLTVB3

Gas Unit Pump Pulley PULAK7434 PULBK801 PULBK801 PULBK801 PUL3-3V8

Description Part #

Aluminum Shaft Mount Oiler – SDS 6, SDS 12 and Super 6

TO0612SDS

Large Capacity Remote Oiler TO0612SDSR

Shaft Mount Super 6 Oiler TO06EM

Model 6 Oiler TO06PM

Model 3 Oiler TO03PM

Firewall Oiler TO06FMS

Aluminum Shaft Mount Oiler

Large Capacity Remote Oiler

Shaft Mount Super 6 Oiler

Above parts available on indent only.

Model 6 Oiler

Model 3 Oiler

Firewall Oiler



Condé Pump Accessories & Parts

• Oil Catch Muffler The Conde Oil Catch Muffler is designed to capture oil as it exits the pump as well as muffle the pump exhaust. Large capacity diamond plate oil catch will handle pumps up to 250 CFM including the Super 6, SDS 6, SDS 12, and SDS Ultra pumps.1½’’ connections. The Model 3 oil catch is designed for the Model 3 and ProVac 3 pumps. 1” connections for pumps up to 40 CFM.

• Secondary Moisture Traps All stainless steel components. Designed to remove moisture and debris that can get by the primary shut-off. Large capacity trap is made completely of stainless steel, will never rot, and will keep its good looks indefinitely. 1½” connections. Good for pumps up to 250 CFM including Conde Super and SDS pumps.

• Primary Vacuum Shut-Off Stainless steel cage will not corrode. Designed to shut vacuum off to the vacuum pump when the tank is full, preventing moisture and debris from entering the vacuum pump. Large primary is designed for pumps up to 250 CFM including the Super and SDS pumps. Available in carbon steel, aluminum, or stainless steel. Simply cut a hole in the top of the tank, and install into 6” opening.

• Small Plastic Secondary Trap Small plastic secondary is ideal for systems up to 40 CFM. Idea for the Conde Model 3, Model 6 and ProVac 3 pumps.

• Made in the USA


Description Part #

Aluminum Oil Catch MFOC3612

Model 3 Oil Catch MFOC3

Stainless Steel Moisture Trap LWTRMO1SS

Primary Shut-Off – aluminum LWTRP01

Primary Shut-Off – steel LWTRP02

Primary Shut-Off – stainless steel LWTRP03

Plastic Secondary Trap LWTR02

Aluminum Oil Catch

Model 3 Oil Catch

Aluminum Primary Shut-Off

Plastic Secondary Trap

Stainless Steel Moisture Trap

Steel Primary Shut-Off

VACUUM PUMPS



VACUUM PUMPS

Condé Pump Accessories & Parts(Continued)

• Small Primary Shut-Off Perfect Primary Shut-Off for smaller systems up to 40 CFM. Two Ball System offers excellent protection. Weld into 4” opening.

• Mini Primary Shut-Off For small systems where larger openings are not an option. Shut-off screws into a 3” NPT coupling welded onto the tank. Uses 2” Float Ball. For systems up to 35 CFM.

• Final Filter All stainless steel. Especially in higher CFM pumps, debris and liquid can become airborne and pass by the primary and secondary traps and can build up inside the pump causing premature failure or vane sticking. The Final Filter is designed to catch debris before it enters the pump. Made entirely of stainless steel and will therefore not add to the problem by rotting. Filter element is easy to change and also made of stainless steel for durability.

• Conde Remote Slide Valve The Conde Remote Slide Valve is an easy way to turn any vacuum only pump setup into a vacuum / pressure system. Simply mount the Remote Slide Valve in a convenient location and run a hose from the vacuum port of the pump to the bottom (brass check valve), and a hose from the exhaust port of the pump to the other bottom fitting. Side port goes to the oil catch muffler, and the top port of the Slide Valve connects to the tank.

• Made in the USA


Description Part #

Small Primary Shut-Off LWTRPV3

Mini Primary Shut-Off LWTR31

Final Filter – stainless steel LWTRPF150

Final Filter – plastic LWTRPF02

Conde Remote Slide Valve – 1” remote SVAL061

Conde Remote Slide Valve – 1¼” remote SVAL06114

Conde Remote Slide Valve – 1¹⁄�” remote SVAL0115

Small Primary Shut-Off

Stainless Steel Final Filter

Conde Remote Slide Valve

Mini Primary Shut-Off

Plastic Final Filter1½”, up to 250 CFM 1”, up to 35 CFM



Condé Pump Accessories & Parts(Continued)

• Complete Protection Package 1 Get everything you need to protect your pump; Primary Vacuum Shut-Off, Secondary Moisture Trap, Final Filter, Oil Catch Muffler and save money. For the Super 6, SDS 6, SDS 12 and SDS Ultra pumps, up to 250 CFM.

• Complete Protection Package 2 Economic Protection package for the ProVac 3 pump and pumps to 40 CFM.

• Relief Valves Vacuum Relief Valves are available in three sizes, ¾”, 1”, and 1½’’. ¾” is right for the ProVac 3 pump and pumps to 40 dm. The 1” size is right for the Super 6 and SDS 6 and pumps to 115 CFM. The 1½” size is correct for the SDS 12, SDS Ultra and pumps to 250 CFM. The ¾” and 1” valves can also be set up as pressure relief valves.

• Flush Kit One of the best ways to protect your pump and prolong it’s life is to flush it with kerosene or diesel fuel periodically. The Conde Flush Kit makes this task easy. Made of durable aluminum, simply turn on your pump, and open the ball valve. Instructions are right on the side. Mount in any convenient location.

• Conde Pump Repair Kits Everything needed to repair your pump including: vanes, bearings, seals, shims, bearing covers, bearing cover screws and gaskets or o-rings.

• Made in the USA


Description Part #

Complete Protection Package 1 LWPKG1

Complete Protection Package 2 LWPKG2

Relief Valve – ¾” vac. relief RVP10

Relief Valve – ¾” press. relief RVP10P

Relief Valve – 1” vac. relief RVP13

Relief Valve – 1” press. relief RVP13P

Relief Valve – 1½” vac. relief RVV03

Flush Kit KITFLUSH

Pump Repair Kit – Model 3 KIT03VO

Pump Repair Kit – ProVac KIT03PV

Pump Repair Kit – Model 6 KIT06VO

Pump Repair Kit – Super 6 (three vane) KIT06SS

Pump Repair Kit – Super 6 (four vane) KIT06SSA

Pump Repair Kit – Super 12 (six vane) KIT12SS

Pump Repair Kit – Super 12 (eight vane) KIT12SSA

Pump Repair Kit – SDS 6 (three vane) KIT06SDS

Pump Repair Kit – SDS 6 (four vane) KIT06SDSA

Pump Repair Kit – SDS 12 (three vane) KIT12SDS

Pump Repair Kit – SDS 12 (four vane) KIT12SDSA

Pump Repair Kit – SDS Ultra KIT12ULT

Complete Protection Package 1

Flush Kit

Complete Protection Package 2

Relief Valves

Conde Pump Repair Kits

VACUUM PUMPS



Typical Vacuum Tank Set Up

VACUUM PUMPS

1. Conde PowerPak

2. Oil Catch Muffler

3. Pressure Vent Hose

4. Pump Exhaust Hose

5. Liquid Filled Vacuum / Pressure Gauge

6. S.S. Pre-Filter

7. Vacuum Relief Value

8. S.S. Secondary Trap

9. Vacuum / Pressure Rated Hose

10. Primary Trap

11. Pressure Relief Valve

1

2

3

4

10

6

5

11

9

8

7



Polycarbonate Covers – for Segmented Risers

Segmented Risers

SEGMENTED RISERS

• Modular segmented risers, ready to assemble

• Can be cut or stacked to desirable height

• Nine flat surfaces and fifty one drillable dimples per riser allowing easy access for electrical and PVC fittings, or for mounting options

• Tapered dove-tail locking system provides watertight seal between segments

• Heavy duty 10mm top flange for securing lids

• Accepts most standard 610mm lids as well as SIMTECH iron lids.

• Made in the USA

• High strength polycarbonate

• Baked urethane finish

• Non-slip surface

• Soft urethane gasket

• Positive drop in feature

• Fits most 24” risers

• Four holes and four dimples

• Ribless under-side design

• Easily insulated for cold climates

• Makes the perfect pump basin bottom

The access to your septic tank, pump vault or holding tank should be easy, accessible and safe.

This series of covers offers a great solution for almost all systems, being polycarbonate they are the safest, strongest covers in the market to date – meeting a H10 rating of 3600kg!

At 3 times thicker than most lightweight covers they have extremely high strength and weather durability. A two component baked urethane finish ensures extended UV protection.

The versatile cover is diamond plated and flat, for easy foot traffic and lawn maintenance. Safety info is printed on each cover and the oval centre can be customised to include your name and logo.

A soft gasket provides a good seal on various surfaces. The covers are able to be dropped into place ensuring proper cover and gasket placement – makes installation and alignment easy!

Description Part # Height $

Segmented Riser SIMRISER 8” $122 +gst


Polycarbonate Cover – black SIMLIDABS-B $184 +gst

Polycarbonate Cover – green SIMLIDABS-G $184 +gst

Stack to desired height Dove tail joints lock segments together



SEPTIC TANK FILTER

Simtech Disposable Septic Tank Bristle Filter

The NEW SHAPE of septic tank filters – the Simtech Bristle Filter

Easy in... Easy out... NO locking of moving parts...NO clogging... NO hassle... With better filtration.

Truly the most versatile and effective filter on the market.

The Bristle Filter’s simple design provides a fast, clean and affordable solution for servicing septic tanks. The filter has been hydrodynamically designed with non-directional bristles for unrestricted flow of effluent, allowing biological maturing and sloughing to maximise the septic tank’s efficiency.

The Simtech Bristle Filter has well over ¾ of a kilometre of filtration media with over 5,200 m3 of open area to eliminate clogging. The 14,290cm2 of filtering surface allows a flow rate of over 4,500 LPD (litres per day), filtering to 1.5mm diameter. This incredible amount of filtering surface is achieved through the unique shape of each triangular bristle, which ore than doubles the filtering surface, with no uniform holes or slots to plug.

• 90 degree handle for easy installation and removal

• Adapts to all types of 110mm DWV pipe. Fits any 110mm septic tank ‘T’

• Self locking bristles hold the filter firmly in place, eliminating ‘filter float up’

• Flexible design makes it easy to install in hard to reach places and makes replacing the filter a breeze – no cleaning or rinsing of used filters, simply slide out the used filter and place it in the supplied 4-mil plastic bag, then slide in a new disposable filter

• Constructed of non-directional polypropylene bristles and wound together with a stainless steel core

• The designed shape of the filter creates a debris separation space which naturally sorts debris according to size and mass. This space also ensures even filter usage for a long lifespan and maximises the Bristle Filter’s circular flow

• The standard Simtech passive septic tank filter can be manifolded together in multiples of up to 6 or over 22,700 LPD. These systems are designed for advanced residential and commercial septic system applications

Optional accessories available:

• STF-130 Slotted Sleeve Removal Tool Prevents any solids from leaving the ‘T’ while the filter is being replaced

• STF-120 Grabber Used to extract filters easily from all tanks

Description Part # Quantity $

Bristle Filters SIMFILTER-12 12 $600 +gst


58 Gladstone Rd, Richmond, Nelson0800 255 356 • [email protected]

www.allflow.co.nz

Documents

Pumps.Hoses.Valves. Filters. Tanks.Fittings. … Allflow Vacuum... · a aaa •aaaZZZ DOOÁRZ FR Q] Pumps.Hoses.Valves. Filters. Tanks.Fittings. CONTENTS Vacuum Tanker Fittings Manway