Upload
mohammed-said
View
100
Download
5
Embed Size (px)
Citation preview
1 of 4 | P a g e
Mohammed Said Mohammed ElSayed
Address: 25 Elshohada St – Suez – Suez – Egypt E-Mail: [email protected] Cell Phone: +20 12 22 906 205 Home Phone: +2 062 3333862 : theforce4top : eg.linkedin.com/pub/mohammed-said/88/a3/823
Objective
Seeking challenging assignments with a growth oriented organization and
innovative work environment.
Career Summary I possess 2 Years of progressive full-time work experience in the
QA/QC and inspection fields, where I have capability to adapt in
various situations. I achieve a lot of successes by delivering projects
with quality meets client's satisfactions by working as a contractor
representative and ensure the absence of nonconformities by acting
proactively & implementing continual improvement processes by
working as a client representative.
Career History EPHH (Egyptian Petroleum HH Rig Manufacturing)
Apr-2014 Till PRESENT
As QA/QC Engineer, where 1- I carry out QA/QC of all Inspection & maintenance activities and project
work.
2- Prepare & implement applied code and ITP of the project (have good
knowledge of API, ASME and AWS codes).
3- Preparation of NDT procedures according to codes and project
specifications.
4- Preparing & Reviewing & assuring of PQRs and WPSs as per project
requirement, Welder performance qualification, welders ID card & daily
welding progress.
5- Ensure all requirements of ISO 9001 & API Q1 & ISO/TS 29001 & API 4F
are implemented in site.
2 of 4 | P a g e
6- Materials control, Traceability and inspection.
7- Responsible to inspect the product during the process and perform the visual
check, eliminate what is non conformity with international welding codes.
8- Supervise the repair task of the repairable product in accordance to
approved repair procedures.
9- Follow up the manufacture recommended working procedure of the
production line equipment and ensure that the instruction is understanding and
implemented.
10- Reporting incidents of field nonconformities or product failures to quality
manager.
11- Ensure the analysis of field nonconformities, provided the product or
documented evidence supporting the nonconformity is available to facilitate
the determination of the cause.
12- Ensuring that the products satisfy the design acceptance criteria or
manufacturing acceptance criteria.
13- Ensuring from continual improvement and take decisions based on
gathering information and analysis of data.
14- Ensure all the warehouse and factory equipment are calibrated and follow
up updated calibration plan.
15- Analysis of welding defects causes and its extent to take the necessary
corrective action to eliminate the defects sources.
EMC (Egyptian Maintenance Company)
Aug-2013 Till Apr-2014
As Quality Control Engineer, where 1- Witnessing NDT inspection methods, which are radiographic testing (RT),
ultrasonic testing (UT), and Liquid penetrate testing (PT), and magnetic
particle testing (MT) and hydrostatic pressure testing.
2- Issuing equipment Inspection Reports documenting all the findings, NDT
results, repairs/ replacements to the equipment are recommended.
3- Checking fit up of the joint before start welding operation as per the detailed
drawing (root gap, bevel angle, surface mismatch).
4- Preliminary visual inspection of joints after welding.
5- Interpretation Radiographs of welded joints in accordance with International
Codes and Standards (ASME, ASTM, API, ISO, DIN and ASNT).
6- Prepare documentation for final hand over.
Certificates 2015 Lead auditor ISO 9001 (IRCA & LRQA)
Certificate No.: 15/3102
3 of 4 | P a g e
2013 LII (5 Methods) within the requirement of ASNT-SNT-TC-1A
Ultrasonic Test (UT) Certificate No.: NDT-UT-013-799
Dye Penetration Test (PT) Certificate No.: NDT-PT-013-860
Magnetic Particle Test (MT) Certificate No.: NDT-MT-013-842
Visual Test (VT) Certificate No.: NDT-VT-013-629
Radiographic Test (RT) Certificate No.: NDT-RT-013-738
2014 OSHA – Occupational Safety Health Administration (Awareness)
Certificate No.: ISSC-029-13-003
2009 ICDL – Proficient in MS Office applications Certificate No.: EGY000245409
Courses 2015 AutoCAD 2D from certified Autodesk trainer. 2011 [Summer training] Arab Petroleum Pipelines Company ( SUMED) 2011 [Summer training] Nasr Petroleum Company ( N.P.C )
Education Faculty: petroleum and mining engineering, Suez University
Degree: B.sc of metallurgical & materials engineering, @ 2013,
Cumulative Grade: GOOD ( 71.48 % & 2.9 GPA )
Project: Corrosion and Corrosion Control in Refinery Industry,
Grade: A Excellent
High School: ILS (languages school) , 91.4%
Computer Skills All Windows operating systems applications.
Full Microsoft office.
AutoCAD.
Languages Arabic: Native Language
English: Fluent reading, writing & conversation
French: Beginner
Skills Analytical, good attention to details, self-learner, creative, Hard worker.
Ability to provide innovative ideas in different areas.
Excellent communicator and have ability to build and maintain a good
relationship with clients.
4 of 4 | P a g e
Personal Data Name: Mohammed Said Mohammed Elsayed
Gender: Male
Nationality: Egyptian
Date of birth: 9/3/1992
Marital state: Single
Military Service: Exempted
Driving licenses: Valid
Hobbies Body Building
Running
Swimming
Reading
Reference Depend upon request.