Upload
condari
View
328
Download
2
Embed Size (px)
DESCRIPTION
Â
Citation preview
INSTALLATION & USER INSTRUCTIONS
Qasair Rangehoods Installation Instructions2
Qasair Rangehoods Installation Instructions 3
Standard Warranty
Important Information
Instructions for Models MT / MC / FA / CON / NDCH / LIS / ETN / ECH / WCV
Instructions for Models EAS / WES
Instructions for Models H Series & PYR
Instructions for Models3F / ST / SEA / SMF / CM / STA / STAR / IN
Instructions for ModelsTR CT
Instructions for ModelsBRH / LAM / BAR / MAR / MAJ / FAS
Instructions for Models4F / PRE / MA / SQ 420 / MOL / HAM / FPR / BUR / BEL / D 400 / D 500 / SEN
Installation Ideas
Rangehood Cleaning, Filter Cleaning
Ducting Pieces
Appliance Guarantee
Guarantee Exclusions
8
4
28
33
37
54
56
67
101
96
84
102
103
104
Qasair Rangehoods Installation Instructions4
CONDARI PTY LTD makes over 120 different models of QASAIR Rangehoods plusmany special rangehoods designed by architects and interior designers.
It is important to follow the installation instructions.
There are many different cooking appliances on the Australian market today. Examples: Electric Ego, ceramic hotplates, teppanyaki plates and Induction hotplates. There are gas hotplates with four burners, a wok burner or fish burner of all different heat output. Many companies offer a vario system with individual two gas burners, a wok burner, electric ceramic hotplate, an electric griller or barbecue and an induction hotplate. There are three gas cooking appliances with an open flame griller or barbecue.
Gas regulations require different heights for different brands of rangehoods. QASAIR rangehoods can be fitted 600 mm above the trivet of a gas hotplate. This is due to the fact they do not have plastic motors or plastic internal parts. Over the open flame gas grillers or gas barbecues the filters must be 1200 mm above the cooking surface. Therefore, a special rangehood is required to comply with the regulations. There are no regulations over an electric hotplate except for those set out by the manufacturer. Above a gas wok burner or electric griller or barbecue they should be 700 mm to 800 mm above. All decorative rangehoods in the Sapphire, Gallery, Imperial, Argyle, Federation and Heritage range should be 700 mm to 800 mm above the cooking surface. When a rangehood is in a galley or partially enclosed kitchen, the rangehood can be higher at 900 mm to 1000 mm.
For island situations they should not be above 800 mm as movement around the bench will result in fumes being drawn out from the catchment area of the rangehood.We have a model, the Thermidor which is installed in the ceiling and is higher than the recommendation. This is for aesthetic reasons such as a view or window setting. The rangehood is fitted with three fans to provide the necessary air movement. The Executive Range can be installed at 600mm above the trivets of a gas hotplate, over an induction cooktop the minimum should be 750mm.
1. The installation of QASAIR Rangehoods must comply with the information in this booklet. QASAIR Rangehoods are designed and made to work efficiently over all domestic cookware available on the Australian market.
2. Every QASAIR Rangehood must be ducted to the outside atmosphere by the use of zinc-alume duct or non-porous and non-flammable materials. Do not use of any type of flexible ducting or plastic PVC piping. Rangehoods must not be vented into a wall cavity or a ceiling space. Externally ducting the rangehood prevents a build up of grease, which can be a fire risk. Ensure the external outlet vent does not restrict the airflow in any way, as this may result in reduced performance.
3. QASAIR Rangehoods must be ducted in duct work equivalent to the outlet of the rangehood ie: The cross sectional area of the rangehood outlet and the duct work must be equal. Do not reduce the duct size or have sharp bends. Enlarge the duct size if the duct is to run 6 metres or longer. Advice from CONDARI is available to ensure optimum performance. Always use nonflammable materials to minimise the risk of fire in the duct.
4. Ensure all ducting pieces are correctly fitted and sealed with either duct tape or silicone to ensure that fumes do not escape into the ceiling space and seep into living areas through vents or light fittings. The installation
IMPORTANT INFORMATION
Qasair Rangehoods Installation Instructions 5
and fitting of the rangehood should be done in such a way that will allow the unit to be removed if service is required. Additional costs incurred in the removal of wall tiles, damage to walls or bench tops are not covered by warranty.
5. Always adequately ventilate the room when the rangehood is in use at the same time as appliances burning gas or other fuels.
6. WARNING: Incorrect venting will result in additional noise and a reduction in efficiency. Exhaust air must not be discharged into any chimney or flue, which may carry combustible products from other sources. a) Do not discharge the air-flow from the rangehood into a flue used for exhausting fumes from burning gas or fuel; b) For cleaning purposes please refer to page 101 of installation instructions for stainless steel; c) If cleaning is not carried out in accordance with the instructions as listed on page 101, there may be an increased risk of fire; d) Some parts of the rangehood may become hot when cooking; e) This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
7. Do not flambé under the rangehood.8. If the supply cord is damaged, an authorised service centre or licensed electrician must replace it.9. NOTE: CONDARI recommend an air movement of between 1000 to 1400 cubic metres per hour over an indoor
barbecue, depending on the length of the duct run. Ensure a twin motor unit is installed over indoor barbecues for optimum results. Barbecues should be positioned under the centre of the hood where the fans are mounted and not near the outer edges where leakage may occur.
10. The lights in the rangehoods are LED and come with a night light except for D400L-1 and SEN400L-1. 11. To reduce the risk of fixing screws coming in contact with live parts, do not drill or screw into the rangehood.
Live wires are encapsulated where possible to prevent user contact. If necessary drill from the inside out and only through single sheet material.
12. QASAIR domestic rangehoods are not to be used over barbecues approved for outdoor use only, with a Mega Joule rating of 50mj and over.
13. CONDARI make a range of hoods specifically for outdoor barbecues in alfresco areas under the CONDOR name.
14. CONDARI can manufacture rangehoods to be used over commercial cookers in domestic applications.
Qasair Rangehoods Installation Instructions6
INSTALLATION INSTRUCTIONS - EXECUTIVE RANGE
CUTOUT DIMENSIONS
MODEL HOOD SIZE BASE SIZE CUT OUT DIMENSION
CON 60L 243 x 580 280 x 600 258 x 585
CON 80L 243 x 780 280 x 800 258 x 785
NDCH 90L 243 x 880 280 x 900 258 x 885
NDCH 100L 243 x 980 280 x 1000 258 x 985
NDCH 120L 243 x 1180 280 x 1200 258 x 1185
LIS 500L 390 x 480 430 x 500 400 x 485
LIS 800L 390 x 780 430 x 800 400 x 785
LIS 900L 390 x 870 430 x 900 400 x 885
LIS 1000L 390 x 980 430 x 1000 400 x 985
LIS 1200L 390 x 1180 430 x 1200 400 x 1185
LIS 1500L 390 x 1480 430 x 1500 400 x 1485
WES 60L / EAS 60L 290 x 565 330 x 600 300 x 570
WES 80L / EAS 80L 290 x 780 330 x 800 300 x 785
WES 90L / EAS 90L 290 x 880 330 x 900 300 x 885
WES 100L / EAS 100L 290 x 980 330 x 1000 300 x 985
WCV 1000L 560 x 980 600 x 1000 570 x 985
WCV 1300L 560 x 1280 600 x 1300 570 x 1285
WCV 1600L 560 x 1580 600 x 1600 570 x 1585
WCV 1800L 560 x 1780 600 x 1800 570 x 1785
ECH 600L / ETN 600L 340 x 580 380 x 600 355 x 585
ECH 800L 340 x 780 380 x 800 355 x 785
ECH 900L / ETN 900L 340 x 880 380 x 900 355 x 885
ECH 1000L 340 x 980 380 x 1000 355 x 985
ECH 1200L 340 x 1180 380 x 1200 355 x 1185
Qasair Rangehoods Installation Instructions 7
DUCT DIRECTION CHANGE INSTRUCTIONSBefore installing your rangehood check whether it has the fan mounted for back or top ducting.For top ducting, the unit will have the air outlet at the top, and for back ducting, the unit will have the air outlet at the back.
To change from top to back or back to top, proceed as follows:
Duct direction for ECH, ETN, NDCH and CON modelsThe motor shown is fitted to the back plate (P) and this plate is attached to the hood by screws (S). To change from top to back, remove the filters, unplug fan(s). Undo all the screw (S), carefully remove the plate and turn it around so the motor points out the way required. Fit and reconnect the fan(s), and fit all the screws again and tighten.
Duct direction for LIS / FA / MT / MC / EAS and WES
To change the duct direction, proceed as follows:1. Remove the screws from the fan access panel and remove access panel (for MT and MC models only).2. Disconnect fan(s).3. Unscrew the 2 x 7mm screws (B) fixing the fan to the hood. Remove fan entirely. Repeat for each fan.4. Rotate the fan assembly and re-install so that the air outlet meets with the rangehood outlet hole through which
you are going to vent (top or back).5. Replace the 2 x 7mm screws holding each fan.6. Reconnect the fan(s)7. Refit the fan access panel (for MT, EAS and WES models only).
LIS model – Rear duct
Qasair Rangehoods Installation Instructions8
INSTALLATION INSTRUCTIONS • MT • MC
1. Fit a shelf at 410mm from the base of the cupboard.2. Note hinge location prior to drilling.3. Work from the centre line mark and drill 4 x M5 to M8 holes.4. For top ducted models, cut out hole for the ducting allow 20mm clearance.5. Fix left and right hand mounting brackets (supplied) 145mm from the base of the cupboard flush with the rear of the unit. Notch to the back.6. Lift rangehood onto mounting brackets by holding either end. DO NOT use the slide mechanism as this may
cause damage.7. Insert the 4 x 50mm pan head screws supplied through the shelf and into the rangehood. Turn clockwise to level
the rangehood.8. Fix the rangehood position by inserting 2 x no 8 1/2 inch screws through the left and right hand brackets.9. Fit doors.10. Minor adjustments may be required on the rangehood handle. Loosen the screws on the rear of the handle and
adjust handle position and re- tighten. The rangehood handle can be replaced.11. All of the rangehoods shown on pages 1 and 8 are supplied with a 10AMP plug and lead for connection to a 10AMP GPO, which must be in an accessible position.12. The handle can be removed and replaced with one made by the cabinet maker to fit in with the kitchen cabinets.
The MT 90 has 3 screws and the MT 60 has 2 screws. These can be accessed by sliding the facia out and un-screwing the front from underneath and behind the facia. The handle will come off by tilting it forward from
the top.
Installation must be carried out by the procedure outlined. Failure to do so may void the guarantee. Electrical: Wiring to the appliance must comply with State and local Regulations. Connection to be carried out by a registered electrician.
Qasair Rangehoods Installation Instructions 9
Mini TrimTechnical Specification Sheet
MT Slide Out
Motor Box /Flue Width
Body Width
Light Centres
LED Light
Light Qty
Motor Qty
Filter Qty 1
N/A
Model Model MT 60L-1
2
320mm
Nightlight
N/A
Minimum Height(H =)
Page 1 of 1Condari Pty Ltd.
All-thread Fixing Centres
PowderKote Available
Maximum Height(H =)
Corner Type
ConversionTop/Back Back/Top
Electrical Connection
YES
N/A
10 Amp Lead
N/A
Square
N/A
Version: B 03/12/2014F
N/A
514mm x 177mm
2
MT 90L-1
1
Cool
YES
MT 60L-1
600mm
518mm
1 10 Amp Lead
YES
407mm x 177mm
MT 90L-1
N/A
Square
Cool
YES
518mm
900mm
1
Filter Size
N/A
N/A
Power entry locationis the same for all
MT models.
20
38
275 170
120
395
255
20110
20
110
This view is shownwith slide out trimin closed position.
MINI TRIM - MT
Qasair Rangehoods Installation Instructions10
Motor Box /Flue Width
Condari Pty Ltd. Page 1 of 1Version: B 03/12/2014F
Body Width
Model
Motor Qty
Light Centres
Light Qty
Nightlight
LED Light
Filter Qty
Model
Filter SizeConversionTop/Back Back/Top
Electrical ConnectionMinimum Height(H =)Maximum Height(H =)PowderKote AvailableAll-thread Fixing CentresCorner Type
MC 1000L-2MC 1000L-2
1000mm
918mm
2
Cool
YES
2
320mm
2
457mm x 177mm
YES
10 Amp Lead
N/A
N/A
N/A
N/A
Square
MarcelTechnical Specification Sheet
MC Slide Out
Power Entry
170275
455
179100
20
255
20110
20
110
This view is shownwith slide out trim in closed position.
MARCEL - MC
Qasair Rangehoods Installation Instructions 11
INSTALLATION INSTRUCTIONS • FA
1. The rangehood is designed to be fitted within joinery and can be installed by inserting screws in the three holes provided on each side, or to the top or back by drilling your own mounting holes as required.
2. When installed, cover the access holes to the side fixing screws with the plastic plugs supplied.3. Fit filters.4. Install front panel to suit as per your kitchen design.
Installation must be carried out by the procedure outlined. Failure to do so may void the guarantee. Electrical: Wiring to the appliance must comply with State and local Regulations. Connection to be carried out by a registered electrician.
Qasair Rangehoods Installation Instructions12
Door Width
Condari Pty Ltd. Page 1 of 1Version: B 03/12/2014F
Body Width
Model
Motor Qty
Light Centres
Light Qty
Nightlight
LED Light
Filter Qty
Model
Filter SizeConversionTop/Back Back/Top
Electrical ConnectionMinimum Height(H =)Maximum Height(H =)PowderKote AvailableAll-thread Fixing CentresCorner Type
FA 60L-1 FA 90L-2FA 90L-1FA 60L-1FA 90L-2FA 90L-1
598mm
Centre
2
573.4mm
1
Cool
YES
1
274mm x 290mm
YES
10 Amp Lead
N/A
N/A
N/A
N/A
Square
898mm
873.4mm
1
Cool
YES
2
350mm
2
898mm
873.4mm
2
Cool
YES
2
350mm
2
424mm x 290mm
YES
10 Amp Lead
N/A
N/A
N/A
N/A
Square
424mm x 290mm
YES
10 Amp Lead
N/A
N/A
N/A
N/A
Square
FoldawayTechnical Specification Sheet
FA Undercupboard
Power Entry
300
450
20
110
200
4 4 4
20110
Power Entry
This view is shownwith door in closedposition.
10
FOLDAWAY - FA
Qasair Rangehoods Installation Instructions 13
INSTALLATION INSTRUCTIONS • CON • NDCH • LIS • ECH • ETN
1. Loosen screws A and B by turning anti-clockwise.2. Turn screw ‘D’ anti-clockwise to extend the outer spring bracket.3. Insert rangehood into cut out and turn screw ‘C’ clockwise to align rangehood with cupboard base.4. Do not over tighten.5. Tighten screw ‘A’ by turning clockwise to lock fixing bracket.6. Fit off ductwork as required.7. To remove rangehood, turn screw ‘D’ clockwise.
Models: ETN ECH NDCH
Models: LIS CON
RANGEHOOD SPRING BRACKETS
Installation must be carried out by the procedure outlined. Failure to do so may void the guarantee. Electrical: Wiring to the appliance must comply with State and local Regulations. Connection to be carried out by a registered electrician.
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
Cupboard Front of Rangehood
Qasair Rangehoods Installation Instructions14
Motor Box /Flue Width
Condari Pty Ltd. Page 1 of 1Version: A 01/07/2014F
Body Width
Model
Motor Qty
Light Centres
Light Qty
Nightlight
LED Light
Filter Qty
Model
Filter SizeConversionTop/Back Back/Top
Electrical ConnectionMinimum Height(H =)Maximum Height(H =)PowderKote AvailableAll-thread Fixing CentresCorner Type
CON 60L-1 CON 80L-2CON 80L-1CON 60L-1CON 80L-2CON 80L-1
600mm
Centre
2
580mm
1
Cool
YES
1
269mm x 250mm
YES
10 Amp Lead
N/A
N/A
N/A
N/A
Square
800mm
780mm
1
Cool
YES
2
379mm
2
800mm
780mm
2
Cool
YES
2
379mm
2
379mm x 157mm
YES
10 Amp Lead
N/A
N/A
N/A
N/A
Square
379mm x 157mm
YES
10 Amp Lead
N/A
N/A
N/A
N/A
Square
ConleyTechnical Specification Sheet
CON Undercupboard
Power Entry
280
360
12
10110
10
110
Power Entry
240
CONLEY - CON
Qasair Rangehoods Installation Instructions 15
UndermountTechnical Specification Sheet
NDCH Undercupboard
Motor Qty
LED Light
Nightlight
Model
Body Width
Motor Box /Flue Width
Light Qty
Light Centres
Filter Qty
Cool
YES
1
880mm
900mm
NDCH 90L-1
2
Page 1 of 2
All-thread Fixing Centres
Condari Pty Ltd.
PowderKote Available
2
770mm
NDCH 90L-2
2
770mm
880mm
Minimum Height(H =)
Model
Maximum Height(H =)
Corner Type Square
N/AN/A
Version: B 19/12/2014F
Square
Electrical Connection
N/A
N/A
340mm x 260mm
YES
NDCH 90L-1 NDCH 90L-2
Cool
YES
900mm
2
2
10 Amp Lead
YES
340mm x 260mm
10 Amp Lead
N/A
Filter SizeConversionTop/Back Back/Top
N/A
N/A
N/A
Power entry locationis the same for allNDCH models.
280
12
360
10
110
240
10110
UNDERMOUNT - NDCH
Qasair Rangehoods Installation Instructions16
UndermountTechnical Specification Sheet
NDCH Undercupboard
2
Light Centres
Filter Qty
860mm
Motor Box /Flue Width
Body Width
Motor Qty
Nightlight
Light Qty
LED Light
1060mm
Cool
NDCH 120L-2
1180mm
YES
2
NDCH 100L-2
Cool
980mm
Model
2
All-thread Fixing Centres
Page 2 of 2Version: B 19/12/2014FCondari Pty Ltd.
2 Corner Type
Maximum Height(H =)
2
1000mm 1200mm Filter Size
Electrical ConnectionMinimum Height(H =)
Square
N/A
N/A N/A
Square
Model
PowderKote Available N/A
N/A
10 Amp Lead
N/A
N/A
YES
479mm x 260mm
N/A
NDCH 100L-2
YES
NDCH 120L-2
10 Amp Lead
379mm x 260mm
YES
2
ConversionTop/Back Back/Top
Power entry location is the same for allNDCH models.
280
12
360
10110
240
10
110
UNDERMOUNT - NDCH
Qasair Rangehoods Installation Instructions 17
Motor Box /Flue Width
Condari Pty Ltd. Page 1 of 3Version: B 03/12/2014F
Body Width
Model
Motor Qty
Light Centres
Light Qty
Nightlight
LED Light
Filter Qty
Model
Filter SizeConversionTop/Back Back/Top
Electrical ConnectionMinimum Height(H =)Maximum Height(H =)PowderKote AvailableAll-thread Fixing CentresCorner Type
LIS 500L-1 LIS 800L-2LIS 800L-1LIS 500L-1LIS 800L-2LIS 800L-1
500mm
Centre
1
480mm
1
Cool
YES
1
459mm x 290mm
YES
10 Amp Lead
N/A
N/A
N/A
N/A
Square
800mm
780mm
1
Cool
YES
2
380mm
2
800mm
780mm
2
Cool
YES
2
380mm
2
379mm x 290mm
YES
10 Amp Lead
N/A
N/A
N/A
N/A
Square
379mm x 290mm
YES
10 Amp Lead
N/A
N/A
N/A
N/A
Square
LismoreTechnical Specification Sheet
LIS Undercupboard
Power entry locationis the same for all
LIS models.
430
20 20
400
20
110
315
20110
75
390
12 150
LISMORE - LIS
Qasair Rangehoods Installation Instructions18
LismoreTechnical Specification Sheet
LIS Undercupboard
Motor Box /Flue Width
Body Width
Light Centres
LED Light
Light Qty
Motor Qty
Filter Qty 2
424mm
Model Model LIS 900L-2
2
480mm
Nightlight
N/A
Minimum Height(H =)
Page 2 of 3Condari Pty Ltd.
All-thread Fixing Centres
PowderKote Available
Maximum Height(H =)
Corner Type
ConversionTop/Back Back/Top
Electrical Connection
YES
N/A
10 Amp Lead
N/A
Square
N/A
Version: B 03/12/2014F
N/A
424mm x 290mm
2
LIS 1000L-2
2
Cool
YES
LIS 900L-2
900mm
870mm
2 10 Amp Lead
YES
479mm x 290mm
LIS 1000L-2
N/A
Square
Cool
YES
980mm
1000mm
2
Filter Size
N/A
N/A
Power entry locationis the same for all
LIS models.
430
20 20
400
20
110
20110
315
390
7512 150
LISMORE - LIS
Qasair Rangehoods Installation Instructions 19
Minimum Height(H =)
Filter Size
Model
ConversionTop/Back Back/Top
N/A
LIS 1200L-3
Electrical Connection
Page 3 of 3
Body Width
Motor Box /Flue WidthMotor Qty
Model
Nightlight
Filter Qty
Light Qty
Version: B 03/12/2014F
Light Centres
Maximum Height(H =)
Corner Type
Condari Pty Ltd.
1180mm
1200mm
LIS 1200L-2
4
LED Light
580mm
YES
N/A
N/A
10 Amp Lead
290mm x 290mm
LIS 1200L-2
N/A
LIS 1500L-3
N/A
YESYES
2
N/A
290mm x 290mm 365mm
x 290mm
All-thread Fixing Centres
PowderKote Available
LIS 1500L-3
1500mm
1480mm
3
3
1200mm
1180mm
452mm
4
YES
4
Cool Cool
32
LIS 1200L-3
N/A
Square
YES
10 Amp Lead10 Amp Lead
YES
N/A
Square
N/A
N/A
N/A
Square
N/A
580mm
2
Cool
LismoreTechnical Specification Sheet
LIS Undercupboard
Power entry locationis the same for all
LIS models.
430
20 20
400
20
110
20110
315
7512
390
150
LISMORE - LIS
Qasair Rangehoods Installation Instructions20
EatonTechnical Specification Sheet
ETN Undercupboard
N/A
10 Amp Lead
N/A
N/A
N/A
379mm x 290mm
YES
N/A
PowderKote Available
Electrical ConnectionMinimum Height(H =)
ConversionTop/Back Back/Top
Filter Size
Maximum Height(H =)YES
Cool
880mm
21
2
N/A
900mm
ETN 900L-2
379mm x 290mm
YES
10 Amp Lead
YES
900mm
Cool
2
880mm
10 Amp Lead
N/A
N/A
479mm x 290mm
ETN 900L-1
YES
N/A
ETN 600L-1 ETN 900L-2Model
2
YES
Cool
ETN 900L-1ETN 600L-1
1
580mm
600mm
Square
N/A
Square
Version: B 12/05/2015F
N/A
Square
N/A
2
800mm520mm
1 2
800mm
Corner Type
All-thread Fixing Centres
Condari Pty Ltd. Page 1 of 1
Motor Box /Flue Width
Filter Qty
Light Centres
LED Light
Motor Qty
Light Qty
Nightlight
Body Width
Model
380
12
290
340
10110
10
110
Power entry locationis the same for all ECH models.
EATON - ETN
Qasair Rangehoods Installation Instructions 21
ECH Undercupboard
ECHTechnical Specification Sheet
Motor Box /Flue Width
Condari Pty Ltd. Page 1 of 3Version: A 10/04/2014
Body Width
Model
Motor Qty
Light Centres
Light Qty
Nightlight
LED Light
Filter Qty
Model
Filter SizeConversionTop/Back Back/Top
Electrical ConnectionMinimum Height(H =)Maximum Height(H =)PowderKote AvailableAll-thread Fixing CentresCorner Type
ECH 600L-1 ECH 800L-2ECH 800L-1ECH 600L-1ECH 800L-2ECH 800L-1
600mm
521mm
1
580mm
1
Cool
YES
2
479mm x 290mm
YES
10 Amp Lead
N/A
N/A
N/A
Square
800mm
780mm
1
Cool
YES
2
721mm
2
800mm
780mm
2
Cool
YES
2
721mm
2
340mm x 290mm
YES
10 Amp Lead
N/A
N/A
N/A
Square
340mm x 290mm
YES
10 Amp Lead
N/A
N/A
N/A
Square
N/A N/A N/A
Power entry location is the same for allECH models.
380
290
340
10110
12
10
110
ECH
Qasair Rangehoods Installation Instructions22
Motor Qty
LED Light
Nightlight
Model
Body Width
Motor Box /Flue Width
Light Qty
Light Centres
Filter Qty
Cool
YES
1
880mm
900mm
ECH 900L-1
2
Page 2 of 3
All-thread Fixing Centres
Condari Pty Ltd.
PowderKote Available
2
800mm
ECH 900L-2
2
800mm
880mm
Minimum Height(H =)
Model
Maximum Height(H =)
Corner Type Square
N/AN/A
Version: A 10/04/2014
Square
Electrical Connection
N/A
N/A
379mm x 290mm
YES
ECH 900L-1 ECH 900L-2
Cool
YES
900mm
2
2
10 Amp Lead
YES
379mm x 290mm
10 Amp Lead
N/A
Filter SizeConversionTop/Back Back/Top
N/A
N/A
N/A
ECHTechnical Specification Sheet
ECH Undercupboard
380
12
290
340
10110
10
110
Power entry locationis the same for all ECH models.
ECH
Qasair Rangehoods Installation Instructions 23Version: A 10/04/2014 Page 3 of 3
Square
N/A
Corner Type
Light Centres
Light Qty
Electrical ConnectionMinimum Height(H =)
Condari Pty Ltd.
ConversionTop/Back Back/Top
290mm x 290mm
ECH 1000L-2
Filter Qty
All-thread Fixing Centres
N/A
YES
N/A
ECH 1200L-2Model
Filter Size
PowderKote Available
Maximum Height(H =)
Motor Box /Flue Width
Body Width
Model
Motor Qty
Nightlight
LED Light
YES
340mm x 290mm
10 Amp Lead
N/A
N/A
10 Amp Lead
N/A
N/A
N/A
Square
2
1180mm
1200mm
ECH 1200L-2
1061mm
3
911mm
2
Cool
YES
2
980mm
3
2
Cool
1000mm
ECH 1000L-2
YES
ECH 1200L-3 ECH 1200L-3
1200mm
1180mm
3
Cool
YES
2
1061mm
3
340mm x 290mm
YES
10 Amp Lead
N/A
N/A
N/A
N/A
Square
ECH
ECHTechnical Specification Sheet
Undercupboard
380
290
340
10110
10
11012
Power entry location is the same for allECH models.
ECH
Qasair Rangehoods Installation Instructions24
INSTALLATION INSTRUCTIONS • WCV
All the rangehoods are supplied as Top ducted and can be Side or Back ducted through separate ducting pieces.Side ducting can be either Left or Right.
When being installed over a gas cooker with an open flame griller the filters must be 1200 mm above the cooking
surface. In these cases, it may be necessary to have remote switching as the switches on the rangehood may be out of reach.
Please refer to Gas Installation Code AG 601 – 2002.
1. Unplug power cable ‘A’ and fan cables.2. Remove screws ‘B’ and remove inner section of rangehood.3. Loosen screws ‘C’ & ‘D’ by turning anti-clockwise.4. Turn screw ‘F’ anti-clockwise to extend the spring bracket.5. Insert outer shell of rangehood into cutout and turn screw ‘E’ clockwise to align rangehood with cupboard base. Be
sure that the spring bracket has engaged with the cabinet panel before tightening ‘E’.6. Do not over tighten.7. Tighten screw ‘C’ by turning clockwise to lock fixing bracket.8. Refit inner section of rangehood with screws ‘B’.9. Plug power cable ‘A’ into it’s socket and in in fan cables.10. Fit off ductwork as required.11. To remove rangehood repeat points 1 & 2 loosen screw ‘C’, turn screw ‘F’ clockwise.
Installation Instructions WCV1000L-2 WCV1300L-3WCV1600L-3 WCV1800L-3
Cutout Dimensions -WCV1000L-2 985 x 568WCV1300L-3 1285 x 568WCV1600L-3 1585 x 568WCV1800L-3 1785 x 568
A
B
C
D
E
1. Unplug power cable A and fan cables.2. Remove screws B and remove inner section of rangehood.3. Loosen screws C & D by turning anti-clockwise.4. Insert outer shell of rangehood into cutout and turn screw E clockwise to align rangehood with cupboard base.5. Do not over tighten this screw.6. Tighten screw C by turning clockwise to lock fixing bracket.7. Refit inner section of rangehood with screws B.8. Plug power cable A into it's socket and plug in fan cables.9. Fit off duct work as required.10. To remove rangehood repeat points 1 & 2, loosen screw C, turn screw F clockwise.
F
Installation Instructions WCV1000L-2 WCV1300L-3WCV1600L-3 WCV1800L-3
Cutout Dimensions -WCV1000L-2 985 x 568WCV1300L-3 1285 x 568WCV1600L-3 1585 x 568WCV1800L-3 1785 x 568
A
B
C
D
E
1. Unplug power cable A and fan cables.2. Remove screws B and remove inner section of rangehood.3. Loosen screws C & D by turning anti-clockwise.4. Insert outer shell of rangehood into cutout and turn screw E clockwise to align rangehood with cupboard base.5. Do not over tighten this screw.6. Tighten screw C by turning clockwise to lock fixing bracket.7. Refit inner section of rangehood with screws B.8. Plug power cable A into it's socket and plug in fan cables.9. Fit off duct work as required.10. To remove rangehood repeat points 1 & 2, loosen screw C, turn screw F clockwise.
F
Installation must be carried out by the procedure outlined. Failure to do so may void the guarantee. Electrical: Wiring to the appliance must comply with State and local Regulations. Connection to be carried out by a registered electrician.
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
Cupboard Front of Rangehood
Qasair Rangehoods Installation Instructions 25
COBARTechnical Specification Sheet
WCV Undercupboard
Body Width
LED Light
Motor Qty
Model
Light Qty
Light Centres
Filter Qty
YES
4
580mm
Cool
WCV 1000L-2
1000mm
2
Nightlight
3
PowderKote Available
Maximum Height(H =)
Version: A 13/11/2014F
N/A
Square
Condari Pty Ltd.
All-thread Fixing CentresCorner Type
580mm
4
YES
Cool
3
Motor Box /Flue Width
10 Amp Lead
WCV 1000L-2
290mm x 422mm
N/A N/A
Page 1 of 3
4
980mm
Square
N/A
N/A
YES
290mm x 422mm
N/A
Electrical Connection
Model WCV 1300L-3
YES
10 Amp Lead
1300mm
1280mm
WCV 1300L-3
Minimum Height(H =)
Filter SizeTop DuctedConversion: Back , Side
N/A
N/A
Power entry locationis the same for all
Cobar models.
600
28012
500
20
30 110340
560
COBAR - WCV
Qasair Rangehoods Installation Instructions26
272mm x 422mm
YES
10 Amp Lead
YES
WCV 1800L-3
4
3
YES
816mm
WCV 1800L-3
1780mm
1800mm
1580mmMotor Box /Flue Width
Cool
All-thread Fixing Centres
Condari Pty Ltd.
N/A
N/A N/A
N/A
N/A
Square
PowderKote Available
N/AMinimum Height(H =)
Top DuctedConversion: Back , Side
Electrical Connection
Filter Size
Model
Corner Type
N/A
6
Maximum Height(H =)
Page 2 of 3
Square
N/A
290mm x 422mm
WCV 1600L-3
Version: A 13/11/2014F
10 Amp Lead
YES
4
1600mm
WCV 1600L-3
Filter Qty
Light Centres
Light Qty
Nightlight
LED Light
Motor Qty
Body Width
3
Cool
5
872mm
Model
Undercupboard
COBARTechnical Specification Sheet
WCV
Power entry locationis the same for all
Cobar models.
560
34011030
20
500
12 280
600
COBAR - WCV
Qasair Rangehoods Installation Instructions 27
WCV B2
WCV S2
WCV B3
WCV S3
WCV S3T
COBARTechnical Specification Sheet
UndercupboardWCV
Version: A 13/11/2014F Page 3 of 3Condari Pty Ltd.Ducted Pieces
BACK DUCTED PIECES
SIDE DUCTED PIECES
110
150
138
110
24
25
15
COBAR - WCV
Qasair Rangehoods Installation Instructions28
INSTALLATION INSTRUCTIONS • WES • EAS
1. Loosen screws A and B by turning anti-clockwise.2. Turn ‘D’ anti-clockwise to extend the outer spring bracket.3. Insert rangehood into cut out and turn screw ‘C’ clockwise to align rangehood with cupboard base.4. Do not over tighten.5. Tighten screw ‘A’ by turning clockwise to lock fixing bracket.6. Fit off ductwork as required.7. To remove rangehood, turn screw ‘D’ clockwise.
Model: WES Model: EAS
WESTMOREEASTMORE
RANGEHOOD SPRING BRACKETS
Installation must be carried out by the procedure outlined. Failure to do so may void the guarantee. Electrical: Wiring to the appliance must comply with State and local Regulations. Connection to be carried out by a registered electrician.
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
Cupboard Front of Rangehood
A
B
C
B C
D
D
A
Qasair Rangehoods Installation Instructions 29
EastmoreTechnical Specification Sheet
EAS Undercupboard
Motor Qty
LED Light
Nightlight
Model
Body Width
Motor Box /Flue Width
Light Qty
Light Centres
Filter Qty
Cool
YES
1
565mm
600mm
EAS 60L-1
2
Page 1 of 2
All-thread Fixing Centres
Condari Pty Ltd.
PowderKote Available
2
380mm
EAS 80L-2
2
300mm
780mm
Minimum Height(H =)
Model
Maximum Height(H =)
Corner Type Square
N/AN/A
Version: B 02/12/2014F
Square
Electrical Connection
N/A
N/A
272mm x 272mm
YES
EAS 60L-1 EAS 80L-2
Cool
YES
800mm
2
2
10 Amp Lead
YES
379mm x 260mm
10 Amp Lead
N/A
Filter SizeConversionTop/Back Back/Top
N/A
N/A
N/A
Power entry locationis the same for all
EAS models.
Motor AccessPanel
Motor AccessPanel
330
12
FILTER 330
11020
20 110290
FILTER225
570
EASTMORE - EAS
Qasair Rangehoods Installation Instructions30
EastmoreTechnical Specification Sheet
EAS Undercupboard
Body Width
LED Light
Motor Qty
Model
Light Qty
Light Centres
Filter Qty
YES
2
430mm
Cool
EAS 90L-2
900mm
2
Nightlight
2
PowderKote Available
Maximum Height(H =)
Version: B 02/12/2014F
N/A
Square
Condari Pty Ltd.
All-thread Fixing CentresCorner Type
480mm
2
YES
Cool
2
Motor Box /Flue Width
10 Amp Lead
EAS 90L-2
429mm x 260mm
N/A N/A
Page 2 of 2
2
880mm
Square
N/A
N/A
YES
479mm x 260mm
N/A
Electrical Connection
Model EAS 100L-2
YES
10 Amp Lead
1000mm
980mm
EAS 100L-2
Minimum Height(H =)
Filter SizeConversionTop/Back Back/Top
N/A
N/A
Power entry locationis the same for all
EAS models.
Motor AccessPanel
Motor AccessPanel
330
12
110
20
20 110290
570
FILTER330 FILTER
225
EASTMORE - EAS
Qasair Rangehoods Installation Instructions 31
WestmoreTechnical Specification Sheet
WES Undercupboard
Motor Qty
LED Light
Nightlight
Model
Body Width
Motor Box /Flue Width
Light Qty
Light Centres
Filter Qty
Cool
YES
1
565mm
600mm
WES 60L-1
2
Page 1 of 2
All-thread Fixing Centres
Condari Pty Ltd.
PowderKote Available
2
380mm
WES 80L-2
2
300mm
780mm
Minimum Height(H =)
Model
Maximum Height(H =)
Corner Type Square
N/AN/A
Version: B 03/12/2014F
Square
Electrical Connection
N/A
N/A
272mm x 272mm
YES
WES 60L-1 WES 80L-2
Cool
YES
800mm
2
2
10 Amp Lead
YES
379mm x 260mm
10 Amp Lead
N/A
Filter SizeConversionTop/Back Back/Top
N/A
N/A
N/A
Power entry locationis the same for all
WES models.
Motor AccessPanel
Motor AccessPanel
33012
FILTER145
450110
20
20 110290
FILTER60
WESTMORE - WES
Qasair Rangehoods Installation Instructions32
WestmoreTechnical Specification Sheet
WES Undercupboard
Body Width
LED Light
Motor Qty
Model
Light Qty
Light Centres
Filter Qty
YES
2
430mm
Cool
WES 90L-2
900mm
2
Nightlight
2
PowderKote Available
Maximum Height(H =)
Version: B 03/12/2014F
N/A
Square
Condari Pty Ltd.
All-thread Fixing CentresCorner Type
480mm
2
YES
Cool
2
Motor Box /Flue Width
10 Amp Lead
WES 90L-2
429mm x 260mm
N/A N/A
Page 2 of 2
2
880mm
Square
N/A
N/A
YES
479mm x 260mm
N/A
Electrical Connection
Model WES 100L-2
YES
10 Amp Lead
1000mm
980mm
WES 100L-2
Minimum Height(H =)
Filter SizeConversionTop/Back Back/Top
N/A
N/A
Power entry locationis the same for all
WES models.
Motor AccessPanel
Motor AccessPanel
FILTER60
29011020
20
110450
FILTER145
12 330
WESTMORE - WES
Qasair Rangehoods Installation Instructions 33
INSTALLATION INSTRUCTIONS • H SERIES • PYR
1. Remove canopy and flue from boxes and check you have correct model and flue.2. Locate centre point of cooktop.3. Use level or plumb line to mark centre up to ceiling.4. Mark level line for base of canopy 700-800mm above bench 750mm desirable.5. Check roof space above for wires and obstructions as now is the time to decide on any changes to location due
to immovable obstructions.6. Mark flue size on ceiling and cut neat exact hole to pass flue through.7. For rear ducted models cut hole in wall for vent to pass through.8. Fix mounting bracket to wall at desired height.9. Remove fan(s) from canopy by removing side fixing bolts and disconnecting electrical plug at flexible connector.10. Locate solid fixing points on wall and drill holes in rear of canopy to suit. If no solid fixing is available then now is
the time to install fixing points. Four points are recommended with one on each side at top and one on each side at bottom.
11. Drill hole in rear of unit to pass power connection through where available on wall.12. Check flue slides through hole in ceiling.13. Place canopy flat on floor and fit stainless flue over spigot pushing all the way down for a neat fit. Drill hole in
rear of flue and fix to canopy with pop rivet or screw.14. Carefully lift canopy into position, guiding flue through ceiling and feeding power cable through hole in rear of
canopy. Make sure canopy is sitting correctly on mounting bracket then fix to wall through fixing holes with solid screws. (You may need to place a packer behind canopy if wall is bowed to make the canopy sit correctly).
15. Complete electrical connection to 10 AMP junction box to local electrical authority regulations ensuring power is turned off during work.
16. Fit ducting to outside or exterior wall vent for rear ducted models. (Seal rear vents onto rear of hood with silicone). A plumber should seal roof penetration with appropriate flashing. All joins in ducting need to be sealed with duct tape or silicone and only use approved ducting of the correct size for your canopy.
17. Fit motor(s) back into canopy with fixing bolts and plug electrical connector in.18. Test run hood.
MOUNTING BRACKET• Use vertically punched slot for centre line• Before cutting any holes check ceiling space for structural beams. It may be possible at this point to relocate the
hood position.
The fixing points are prepunched holes in the back of the hood and it may be necessary to drill through the back of the hood into the wall stud.
Recommended fixing points
Installation must be carried out by the procedure outlined. Failure to do so may void the guarantee. Electrical: Wiring to the appliance must comply with State and local Regulations. Connection to be carried out by a registered electrician.
Qasair Rangehoods Installation Instructions34
HeritageTechnical Specification Sheet
H Wall Mounted
3
310mm
Power Entry Vertical
Light Centres
Light Qty
600mm
600HL-1
LED Light
ConversionTop/Back Back/Top
Nightlight
2
Condari Pty Ltd.
Filter Qty 2
Motor Qty
Motor Box /Flue Width
150mm
Version: C 20/01/2015F
Body Width
Model 600HL-1
Page 1 of 2
Filter Size 272mm x 355mm
NO
700HL-1
Square Square
130mm
900HL-1
N/A
YES
125mmPower Entry Horizontal
PowderKote Available
Corner Type
Electrical Connection
YES
Outlet Spacing
900mm
240mm
Cool
11
700HL-1
Cool
510mm
22
310mm
YES
Junction Box
NO
Junction Box
135mm 210mm
NO
YES
Square
N/A N/A
272mm x 355mm290mm
x 355mm
150mm
Junction Box
Model900HL-1
YESYES
1
240mm
Cool
240mm
700mm
2
500
300
150
110
Available Lengths:
DLE
600mm
DLE
900mm
DLE
1200mm
DLE
1500mm
106
30
Minimum Height:
300mm
Maximum Height:
1800mm
HERITAGE - H
Qasair Rangehoods Installation Instructions 35
HeritageTechnical Specification Sheet
H Wall Mounted
YES
2
816mm
2
370mm
Cool
Model1500HL-2
1500mm1200mm
370mm
1200HL-2
YES
Cool
2
Power Entry Vertical
648mm
22
Cool
370mm
2
YES
5
Outlet Spacing
Model
Body Width
Motor Box /Flue WidthMotor Qty
LED Light
4
1000HL-2
1000mm
510mm
3
Nightlight
Light Qty
Light Centres
Filter Qty
Junction Box
215mm
375mm
YES
272mm x 355mm 272mm
x 355mm
1500HL-2
NO
1200HL-2
YES
150mm
Square
Version: C 20/01/2015F
Square
75mm
290mm x 355mm
1000HL-2
Junction Box
130mm
100mm
NO
Square
Page 2 of 2
Junction Box
NO
250mm
YES
190mm
100mm
Condari Pty Ltd.
PowderKote Available
Corner Type
Electrical Connection
Power Entry Horizontal
Filter SizeConversionTop/Back Back/Top
500
30
150
110375
Available Lengths:
DLE-2
600mm
DLE-2
900mm
DLE-2
1200mm
DLE-2
1500mm
150
Minimum Height:
375mm
Maximum Height:
1875mm
HERITAGE - H
Qasair Rangehoods Installation Instructions36
PyramidTechnical Specification Sheet
PYR Wall Mounted
ConversionTop/Back Back/Top
Filter Size
Model
Electrical ConnectionMinimum Height(H =)Maximum Height(H =)PowderKote AvailableAll-thread Fixing Centres
Page 1 of 1
Corner Type
N/A
Filter Qty 3
Motor Qty
Light Qty
Light Centres
Motor Box /Flue Width
Body Width
Model
Cool
YES
2
PYR 900L-1
1
900mm
270mm
510mm
LED Light
Nightlight
Condari Pty Ltd.
Junction Box
PYR 900L-1
Square
Version: B 20/01/2015F
NO
N/A
N/A
N/A
272mm x 355mm
500
380
150
110
30
Power Entry
280
Available Lengths:
DLP
600mm
DLP
900mm
DLP
1200mm
DLP
1500mm
20 110
500
30
230
PYRAMID - PYR
Qasair Rangehoods Installation Instructions 37
INSTALLATION INSTRUCTIONS • 3F • ST • SEA • SMF • CM • STA / STAR / STF • IN (REMOTE SWITCHED)
1. Prepare wall by marking level line at desired height above cooktop.2. Plumb line from centre of cooktop to ceiling and mark flue cut out. 3. Mark level line for base of canopy 700-800mm above bench 750mm desirable. 4. Position mounting bracket on wall and fix with four screws. 5. Cut a neat hole through the ceiling and remove any obstructing timbers.6. Note: Various offsets are available from your QASAIR dealer to duct around any major structural beams which
cannot be removed. Ask your QASAIR dealer for advice.7. In the case of back ducted models, cut a hole in the wall at the desired height.8. Locate solid fixing point in wall to support hood. If there is no solid fixing point it will have to be placed in the wall
before proceeding. QASAIR recommend at least four (4) fixing points.9. Drill holes in back of unit at suitable fixing points.10. Drill 20mm hole in the rear of unit for 240 volt power cable as close as possible to junction box or use hole below
the junction box.11. Attach flue (if applicable), then carefully lift into position on level line. Ensure flue is pushed into position and
electrical cable is fed into rear of unit.12. Duct in approved manner to outside atmosphere.
Recommended fixing points
Installation must be carried out by the procedure outlined. Failure to do so may void the guarantee. Electrical: Wiring to the appliance must comply with State and local Regulations. Connection to be carried out by a registered electrician.
Qasair Rangehoods Installation Instructions38
3 FlareTechnical Specification Sheet
3F Wall Mounted
3F 1200L-2
2
3
510mm
YESYES
2
1200mm
400mm
22
300mm
Cool
900mm
3F 900L-2
Cool
Light Centres
Filter Qty
Nightlight
Light Qty
LED Light
Motor Qty
Model
Body Width
Maximum Height(H =)
Corner Type
648mm
Condari Pty Ltd.
4
All-thread Fixing Centres
PowderKote Available
Filter SizeConversionTop/Back Back/Top
Page 1 of 2
Motor Box /Flue Width
Minimum Height(H =)
Model
Electrical Connection
480mm
NO
3F 900L-2
272mm x 355mm
Version: C 20/01/2015F
YES
1680mm
Junction Box Junction Box
NO
1680mm
YES
480mm
Round
N/A
Round
N/A
272mm x 355mm
3F 1200L-2
Power Entry
Power Entry
A Transition is supplied to suit standard DL2 ducting. Flues made to order for back ducted models.
Ø15mm Radius
Ø15mm RadiusØ
510
80
90
250480
180
Available Lengths:
600mm900mm
1200mm
3 FLARE - 3F
Qasair Rangehoods Installation Instructions 39
3 FlareTechnical Specification Sheet
3F Wall Mounted
Filter Qty
Nightlight
Light Qty
Light Centres
Motor Qty
LED Light
Motor Box /Flue Width
Model
Body Width
4
816mm
5
ConversionTop/Back Back/Top
Condari Pty Ltd.
Maximum Height(H =)
All-thread Fixing Centres
Minimum Height(H =)
Corner Type
3F 1500L-3 Model
648mm
Electrical Connection
PowderKote Available YES
Round
N/A
Version: C 20/01/2015F Page 2 of 2
N/A
YES
450mm
3
1200mm
3F 1200L-3 3F 1200L-3
NO
Junction Box
272mm x 355mm
480mm
1680mm 1680mm
3F 1500L-3
Round
Junction Box
Filter Size
3
2
Cool
272mm x 355mm
NO500mm
Cool
1500mm
2
YES
480mm
YES
Power Entry
Power Entry
Ø15mm Radius
Ø15mm Radius
A Transition is supplied to suit standard DL3 ducting. Flues made
to
order
for
back
ducted
models.
510
80
90
250480
Available Lengths:
600mm900mm
1200mm
230
3 FLARE - 3F
Qasair Rangehoods Installation Instructions40
Motor Box /Flue Width
Condari Pty Ltd. Page 1 of 1Version: C 20/01/2015F
Body Width
Model
Motor Qty
Light Centres
Light Qty
Nightlight
LED Light
Filter Qty
Model
Filter SizeConversionTop/Back Back/Top
Electrical ConnectionMinimum Height(H =)Maximum Height(H =)PowderKote AvailableAll-thread Fixing CentresCorner Type
ST 900L-1 ST 1200L-2ST 900L-2ST 900L-1ST 1200L-2ST 900L-2
900mm
510mm
3
400mm
1
Cool
YES
2
272mm x 355mm
NO
Junction BoxBack Ducted 350mmTop Ducted 450mm
1530mm
YES
N/A
Round
900mm
400mm
2
Cool
YES
2
510mm
3
1200mm
400mm
2
Cool
YES
2
648mm
4
272mm x 355mm
NO
Junction BoxBack Ducted 350mmTop Ducted 450mm
1530mm
YES
N/A
Round
272mm x 355mm
NO
Junction BoxBack Ducted 350mmTop Ducted 450mm
1530mm
YES
N/A
Round
StepTechnical Specification Sheet
ST Wall Mounted
Power entry locationis the same for all
Step models.
9mm S-S rail.
510
120
350
H
200 140
Ø15mm Radius
Ø15mm Radius
STEP - ST
Qasair Rangehoods Installation Instructions 41
Motor Box /Flue Width
Condari Pty Ltd. Page 1 of 2Version: C 20/01/2015F
Body Width
Model
Motor Qty
Light Centres
Light Qty
Nightlight
LED Light
Filter Qty
Model
Filter SizeConversionTop/Back Back/Top
Electrical ConnectionMinimum Height(H =)Maximum Height(H =)PowderKote AvailableAll-thread Fixing CentresCorner Type
SEA 600L-1 SEA 900L-2SEA 900L-1SEA 600L-1SEA 900L-2SEA 900L-1
600mm
Centre
2
N/A
1
Cool
YES
1
272mm x 272mm
NO
Junction Box
400mm
1450mm
YES
400mm
Square
900mm
N/A
1
Cool
YES
2
510mm
3
900mm
N/A
2
Cool
YES
2
510mm
3
272mm x 272mm
NO
Junction Box
400mm
1450mm
YES
700mm
Square
272mm x 272mm
NO
Junction Box
400mm
1450mm
YES
700mm
Square
SenatorTechnical Specification Sheet
SEA Wall Mounted
Power entry locationis the same for all
Senator models.
H
400
310
All-Thread rods
are
supplied
for
extra
support.
SENATOR - SEA
Qasair Rangehoods Installation Instructions42
1300mm
Square
1300mm
Square
YES
400mm
Junction Box
NO NO
1450mm
Junction Box
Square
PowderKote Available
1000mmAll-thread Fixing Centres
3
Cool
1500mm
N/A
Maximum Height(H =)
22
816mm
5
816mm
5
Cool
YES YES
N/A
1500mm
Cool
2
SEA 1500L-2 SEA 1500L-3
N/A
2
YES
2
Junction Box
NO
SEA 1200L-2
272mm x 272mm
YES
400mm
272mm x 272mm 272mm
x 272mm
1450mm
Model
ConversionTop/Back Back/Top
400mm
YES
1450mm
SEA 1500L-3
Corner Type
Electrical ConnectionMinimum Height(H =)
SEA 1500L-2
Condari Pty Ltd.
Filter Size
648mm
4
1200mm
LED Light
Filter Qty
SEA 1200L-2
Motor Box /Flue WidthMotor Qty
Light Centres
Light Qty
Nightlight
Model
Body Width
Version: C 20/01/2015F Page 2 of 2
SenatorTechnical Specification Sheet
SEA Wall Mounted
Power entry locationis the same for all
Senator models.
400
310
H
All-Thread rods
are
supplied
for
extra
support.
SENATOR - SEA
Qasair Rangehoods Installation Instructions 43
Motor Box /Flue Width
Condari Pty Ltd. Page 1 of 4Version: C 20/01/2015F
Body Width
Model
Motor Qty
Light Centres
Light Qty
Nightlight
LED Light
Filter Qty
Model
Filter SizeConversionTop/Back Back/Top
Electrical ConnectionMinimum Height(H =)Maximum Height(H =)PowderKote AvailableAll-thread Fixing CentresCorner Type
SMF 600L-1 SMF 900L-2SMF 900L-1SMF 600L-1SMF 900L-2SMF 900L-1
600mm
310mm
2
450mm
1
Cool
YES
2
272mm x 355mm
YES
Junction Box
N/A
N/A
YES
N/A
Round
900mm
750mm
1
Cool
YES
2
510mm
3
900mm
750mm
2
Cool
YES
2
510mm
3
272mm x 355mm
YES
Junction Box
N/A
N/A
YES
N/A
Round
272mm x 355mm
YES
Junction Box
N/A
N/A
YES
N/A
Round
MaitlandTechnical Specification Sheet
SMF Wall Mounted
Power entry locationis the same for all
SMF models.
510
150
11020
450
20110
280
Ø15mm Radius
Ø15mm Radius
MAITLAND - SMF
Qasair Rangehoods Installation Instructions44
MaitlandTechnical Specification Sheet
SMF Wall Mounted
Model
ConversionTop/Back Back/Top
Minimum Height(H =)
Electrical Connection
Filter SizeBody Width
Motor Box /Flue Width
Model
Maximum Height(H =)
SMF 1000L-2
290mm x 355mm
N/A
All-thread Fixing CentresCorner Type
Version: C 20/01/2015F
648mm
4
Condari Pty Ltd.
Round
N/A
N/A
Round
YES
Motor Qty
Page 2 of 4
N/A
YES
Nightlight
Light Qty
850mm
1000mm
SMF 1000L-2
510mm
3
LED Light
Light Centres
Filter Qty
Junction Box
YES
SMF 1200L-2
2
SMF 1200L-2
2
YES
2
Cool
2
N/ACool
YES
1050mm
1200mm 272mm x 355mm
YES
Junction Box
N/A
PowderKote Available
280110
20
450
20110
150
510
Power entry locationis the same for all
SMF models.
Ø15mm Radius
Ø15mm Radius
MAITLAND - SMF
Qasair Rangehoods Installation Instructions 45
Minimum Height(H =)
Filter Size
Model
ConversionTop/Back Back/Top
N/A
SMF 1500L-3
Electrical Connection
Page 3 of 4
Body Width
Motor Box /Flue WidthMotor Qty
Model
Nightlight
Filter Qty
Light Qty
Version: C 20/01/2015F
Light Centres
Maximum Height(H =)
Corner Type
Condari Pty Ltd.
1350mm
1500mm
SMF 1500L-2
5
LED Light
816mm
YES
N/A
YES
Junction Box
272mm x 355mm
SMF 1500L-2
N/A
SMF 1800L-3
YES
YESYES
2
N/A
272mm x 355mm 290mm
x 355mm
All-thread Fixing Centres
PowderKote Available
SMF 1800L-3
1800mm
1650mm
4
3
1500mm
1350mm
422mm
6
YES
5
Cool Cool
32
SMF 1500L-3
N/A
Round
YES
Junction BoxJunction Box
YES
N/A
Round
N/A
YES
N/A
Round
N/A
816mm
2
Cool
MaitlandTechnical Specification Sheet
SMF Wall Mounted
280110
20
450
20110
150
510
Power entry locationis the same for all
SMF models.
Ø15mm Radius
Ø15mm Radius
MAITLAND - SMF
Qasair Rangehoods Installation Instructions46
Wall Mounted
MaitlandTechnical Specification Sheet
SMF
SMF 600L-1 SHROUD
YES YES
SMF 900L-2 SHROUD
1450mm1450mm
SMF 1500L-3 SHROUD
300mm
Version: C 20/01/2015F Page 4 of 4
SMF 1200L-2 SHROUD
Condari Pty Ltd.
Model
300mm300mm
1450mm
YES
Minimum Height(H =)Maximum Height(H =)
YESPowderkote Available
300mm
1450mm
SMF 900L-1 SHROUD
YES
SMF 1000L-2 SHROUD
YES
1450mm
300mm
YES
1450mm
300mm
YES
300mm
1450mm1450mm
300mm
SMF 1500L-2 SHROUD
SMF 1800L-3 SHROUD
SMF 600L-1
SHROUD
SMF 900L-1
SHROUD
SMF 900L-2
SHROUD
SMF 1000L-2
SHROUD
SMF 1200L-2
SHROUD
SMF 1500L-2
SHROUD
SMF 1500L-3
SHROUD
SMF 1800L-3
SHROUD
MAITLAND - SMF
Qasair Rangehoods Installation Instructions 47
CompactTechnical Specification Sheet
CM Wall Mounted
CM 900L-2
2
3
510mm
YESYES
2
900mm
750mm
21
450mm
Cool
900mm
CM 900L-1
Cool
Light Centres
Filter Qty
Nightlight
Light Qty
LED Light
Motor Qty
Model
Body Width
Maximum Height(H =)
Corner Type
510mm
Condari Pty Ltd.
3
All-thread Fixing Centres
PowderKote Available
Filter SizeConversionTop/Back Back/Top
Page 1 of 3
Motor Box /Flue Width
Minimum Height(H =)
Model
Electrical Connection
N/A
YES
CM 900L-1
272mm x 355mm
Version: C 20/01/2015F
YES
N/A
Junction Box Junction Box
YES
N/A
YES
N/A
Round
N/A
Round
N/A
272mm x 355mm
CM 900L-2
Power Entry
Ø15mm Radius
510
80
20110415
11020
280
Ø15mm Radius
Power Entry
COMPACT - CM
Qasair Rangehoods Installation Instructions48
CompactTechnical Specification Sheet
CM Wall Mounted
Filter Qty
Nightlight
Light Qty
Light Centres
Motor Qty
LED Light
Motor Box /Flue Width
Model
Body Width
3
648mm
4
ConversionTop/Back Back/Top
Condari Pty Ltd.
Maximum Height(H =)
All-thread Fixing Centres
Minimum Height(H =)
Corner Type
CM 1200L-2 Model
510mm
Electrical Connection
PowderKote Available YES
Round
N/A
Version: C 20/01/2015F Page 2 of 3
N/A
YES
850mm
2
1000mm
CM 1000L-2 CM 1000L-2
YES
Junction Box
290mm x 355mm
N/A
N/A N/A
CM 1200L-2
Round
Junction Box
Filter Size
2
2
Cool
272mm x 355mm
YES1050mm
Cool
1200mm
2
YES
N/A
YES
Ø15mm Radius
Ø15mm Radius
28020
110
415 11020
80
510
Power Entry
Power Entry
COMPACT - CM
Qasair Rangehoods Installation Instructions 49
Wall Mounted
CompactTechnical Specification Sheet
CM
Condari Pty Ltd. Version: C 20/01/2015F Page 3 of 3
YESPowderkote Available YES
Maximum Height(H =)
Minimum Height(H =)
1450mm
335mm335mm
1450mm
Model CM 1000L-2 SHROUD
1450mm
YES
335mm
CM 900L-2 SHROUD
335mm
CM 1200L-2 SHROUD
1450mm
YES
CM 900L-1 SHROUD
CM 900L-1
SHROUD
CM 900L-2
SHROUD
CM 1000L-2
SHROUD
CM 1200L-2
SHROUD
COMPACT - CM
Qasair Rangehoods Installation Instructions50
StatesmanTechnical Specification Sheet
STA / STAR Wall Mounted
Motor Box /Flue Width
Body Width
LED Light
Motor Qty
Model
PowderKote Available
Maximum Height(H =)
403mm
STA 900L-2
900mm
Cool
STAR 900L-2
W/Rail
3
510mm All-thread Fixing CentresCorner Type
Condari Pty Ltd.
Light Centres
Light Qty
Nightlight
Page 1 of 2
Filter Qty
Electrical Connection
ConversionTop/Back Back/Top
Model
Minimum Height(H =) 740mm
YES
Junction Box
272mm x 355mm
STA 900L-2
3
510mm
YES
N/A
1550mm
Round
N/A
Round
1550mm
YES
Junction Box
Version: C 20/01/2015F
YES2 2
YES
403mm
Cool
2
900mm
2
Filter Size 272mm x 355mm
740mm
STAR 900L-2 W/Rail
YES
20
250
H
80
20250
Power EntrySTA 900L-2 shownwithout shroud.
Ø9mm S-S rail
Shroud
STAR 900L-2 shownwithout shroud.
Shroud
380
Shroud
Rangehood is manufactured as top duct only. A conversion kit for back ducted is supplied.
510
15mm Radius
15mm Radius
STATESMAN - STA/STAR
Qasair Rangehoods Installation Instructions 51
StatesmanTechnical Specification Sheet
STA / STAR Wall Mounted
Version: C 20/01/2015F
N/A
Round
N/A
Round
740mm
1550mm
Junction Box
STAR 1200L-2 W/Rail
YES
272mm x 355mm
YES
STA 1200L-2
YES
272mm x 355mm
Page 2 of 2
YES
740mm
1550mm
Junction Box
Body Width
Motor Box /Flue Width
Nightlight
Motor Qty
LED Light
Light Qty
403mm
2
Cool
YES
2
403mm
2
Cool
YES
4
648mm
2
STAR 1200L-2 W/Rail
1200mm
Model
1200mm
STA 1200L-2
Filter Qty 4
Light Centres 648mm
Condari Pty Ltd.
Corner Type
PowderKote Available
ConversionTop/Back Back/Top
Filter Size
Model
Electrical Connection
Maximum Height(H =)
All-thread Fixing Centres
Minimum Height(H =)
25020
80
H
250
20
Ø9mm S-S rail
STA 1200L-2 shownwithout shroud.
STAR 1200L-2 shownwithout shroud.
Shroud
Shroud
Power Entry
380
Shroud15mm
Radius
15mm Radius
510
Rangehood is manufactured as top duct only. A conversion kit for back ducted is supplied.
STATESMAN - STA/STAR
Qasair Rangehoods Installation Instructions52
IntegraTechnical Specification Sheet
IN Wall Mounted
Motor Box /Flue Width
Body Width
LED Light
Motor Qty
Model
PowderKote Available
Maximum Height(H =)
N/A
IN 600L-1
600mm
Cool
IN 900L-2
3
285mm All-thread Fixing CentresCorner Type
Condari Pty Ltd.
Light Centres
Light Qty
Nightlight
Page 1 of 2
Filter Qty
Electrical Connection
ConversionTop/Back Back/Top
Model
Minimum Height(H =) N/A
YES
Remote Switching
272mm x 355mm
IN 600L-1
2
Centre
NO
N/A
N/A
Square
N/A
Square
N/A
N/A
Remote Switching
Version: A 28/11/2014F
N/A1 2
NO
N/A
Cool
2
900mm
1
Filter Size 272mm x 355mm
N/A
IN 900L-2
YES
600
20110
20110
300
100
70
Power entry locations are the same for all
Integra models.
INTEGRA - IN
Qasair Rangehoods Installation Instructions 53
IntegraTechnical Specification Sheet
IN Wall Mounted
Version: A 28/11/2014F
N/A
Square
N/A
Square
N/A
N/A
Remote Switching
IN 1200L-3
YES
272mm x 355mm
N/A
IN 1200L-2
YES
272mm x 355mm
Page 2 of 2
N/A
N/A
N/A
Remote Switching
Body Width
Motor Box /Flue Width
Nightlight
Motor Qty
LED Light
Light Qty
N/A
2
Cool
NO
2
N/A
3
Cool
NO
4
560mm
2
IN 1200L-3
1200mm
Model
1200mm
IN 1200L-2
Filter Qty 4
Light Centres 560mm
Condari Pty Ltd.
Corner Type
PowderKote Available
ConversionTop/Back Back/Top
Filter Size
Model
Electrical Connection
Maximum Height(H =)
All-thread Fixing Centres
Minimum Height(H =)
Power entry locations are the same for all
Integra models.
600
20110
70
100
20110
300
INTEGRA - IN
Qasair Rangehoods Installation Instructions54
INSTALLATION INSTRUCTIONS • TR CT (REMOTE SWITCHED)
1. Remove hood from packaging being careful not to touch the stainless steel front.2. Locate centre of stove and using level or plumb line, mark centre line up to the ceiling.3. In a new house the hood can be fixed into the ceiling space by bolting or screwing into the ceiling joists or by
building a frame to support the hood.4. In an existing home, a hole must be cut into the ceiling and pushing the hood into the space. Ensure there are no
obstructions to placing the hood in position. In these cases a ceiling flange in stainless can be supplied to finish the hood to the ceiling. It is not supplied in colours.
5. The outlets are either top or back ducted and can be changed on site and the hood can be reversed to suit the intended ducting direction.
6. Once secure in position standard ducting pieces can be used.7. Switches are not provided and remote switching in a convenient position must be installed. The switching used
must be an electrically approved switch and is not provided by Condari Pty Ltd.8. The TR CT can be wired with either individual fan control or one pair of switches to control all fans together.
Contact Condari for further information
Installation must be carried out by the procedure outlined. Failure to do so may void the guarantee. Electrical: Wiring to the appliance must comply with State and local Regulations. Connection to be carried out by a registered electrician.
Qasair Rangehoods Installation Instructions 55
ThermidorTechnical Specification Sheet
TR CT Ceiling Cavity Mounted
Grill Size
Filter Qty
All-thread Fixing Centres498mm x 596mm
5 Corner Type
Page 1 of 1
PowderKote Available
Condari Pty Ltd.
2
NO
598mm x 596mm
Nightlight
Grill Qty
4
3
1200mm
Model TR CT 1500-3
N/A
Model
Body Width
LED Light
3 Remote Switching
N/A
Motor Qty
N/ANO
NONO
3
Filter Size1500mm
TR CT 1200-3
N/A ConversionTop/Back Back/Top
Motor Box /Flue Width
N/A
Square
Version: B 03/12/2014F
Remote Switching
N/A
Square
TR CT 1200-3
290mm x 480mm
YES
N/A
TR CT 1500-3
YES
Maximum Height(H =)
Electrical ConnectionMinimum Height(H =)
N/A
290mm x 480mm
N/A
N/A
600
350
20110
20110
This view is shown with grillsremoved to expose filters.
Power entry locationis the same for allThermidor models.
Optional Flange
THERMIDOR - TR CT
Qasair Rangehoods Installation Instructions56
INSTALLATION INSTRUCTIONS • BRH / LAM • BAR • MAR • MAJ • FAS
1. Remove hood from packaging being careful not to touch stainless steel front.2. Locate centre of stove and using level or plumb line, mark centre line up to ceiling.3. Measure height of hood and mark same distance down from ceiling with level line.4. Mark where ducting needs to be cut either on wall or ceiling, check for wires and timber, then cut hole for ducting.5. Locate solid fixing points on wall (This hood is very heavy and requires good solid fixing points). If necessary fit
some solid fixing timber to wall behind hood now.6. Mark fixing points on rear of hood and drill fixing holes to take solid screws.7. Drill hole in rear or top of the hood to take electrical cable.8. It may be easier to remove fans for easier fixing and weight when installing.9. If you do not have adjustable stands you can cut some temporary timber props to sit canopy on when you lift into
position, to hold it while you fit fixing screws.10. You need two people to lift this canopy into position. * Do not attempt this on your own, as you could cause
yourself injury and damage the hood or stove. CAUTION: Do not under any circumstances lift from the front of the hood or put any pressure on the front face as you will damage the hood permanently.
11. Carefully lift hood into position and sit on stands to level hood, then screw hood into position through fixing holes. Make sure you put fixing holes high up in the hood to stop it falling forward.
12. Fit ducting to hood to the outside atmosphere as required either through the roof with appropriate flashing by a plumber or through the rear wall vent, which needs to be siliconed to the rear of the hood. Always use approved ducting and seal all duct joins with duct tape or silicone.
13. An electrician should make the electrical connection to the hood by connecting to the 10 AMP junction box. Ensure power is turned off during this procedure.
14. Refit fans to hood, insert filters and test.
Handy hints: Sometimes it is easier to lift the hood with a person in the roof space pulling up on a rope attached to a wooden block placed inside base of hood and a second person down the bottom guiding the hood into position.
Installation must be carried out by the procedure outlined. Failure to do so may void the guarantee. Electrical: Wiring to the appliance must comply with State and local Regulations. Connection to be carried out by a registered electrician.
Qasair Rangehoods Installation Instructions 57
Motor Box /Flue Width
Condari Pty Ltd. Page 1 of 2Version: C 20/01/2015F
Body Width
Model
Motor Qty
Light Centres
Light Qty
Nightlight
LED Light
Filter Qty
Model
Filter SizeConversionTop/Back Back/Top
Electrical ConnectionMinimum Height(H =)Maximum Height(H =)PowderKote AvailableAll-thread Fixing CentresCorner Type
BRH 600L-1 BRH 900L-2BRH 900L-1BRH 600L-1BRH 900L-2BRH 900L-1
600mm
310mm
2
N/A
1
Cool
YES
2
272mm x 355mm
NO
Junction Box
400mm
1450mm
YES
500mm
Square
900mm
N/A
1
Cool
YES
2
510mm
3
900mm
N/A
2
Cool
YES
2
510mm
3
272mm x 355mm
NO
Junction Box
400mm
1450mm
YES
800mm
Square
272mm x 355mm
NO
Junction Box
400mm
1450mm
YES
800mm
Square
BentonTechnical Specification Sheet
BRH Wall Mounted
Power entry locationis the same for all
Benton models.
510
H
All-Thread rods
are
supplied
for
extra
support.
BENTON - BRH
Qasair Rangehoods Installation Instructions58
BentonTechnical Specification Sheet
BRH Wall Mounted
BRH 1200L-2
2
3
510mm
YESYES
2
1200mm
N/A
22
N/A
Cool
1000mm
BRH 1000L-2
Cool
Light Centres
Filter Qty
Nightlight
Light Qty
LED Light
Motor Qty
Model
Body Width
Maximum Height(H =)
Corner Type
648mm
Condari Pty Ltd.
4
All-thread Fixing Centres
PowderKote Available
Filter SizeConversionTop/Back Back/Top
Page 2 of 2
Motor Box /Flue Width
Minimum Height(H =)
Model
Electrical Connection
400mm
NO
BRH 1000L-2
290mm x 355mm
Version: C 20/01/2015F
YES
1450mm
Junction Box Junction Box
NO
1450mm
YES
400mm
Square
800mm
Square
950mm
272mm x 355mm
BRH 1200L-2
Power entry locationis the same for all
Benton models.
510
75
250H
20250
All-Thread rods
are
supplied
for
extra
support.
BENTON - BRH
Qasair Rangehoods Installation Instructions 59
LamontTechnical Specification Sheet
LAM Wall Mounted
NO
LAM 900L-1
Junction Box
272mm x 355mm
LAM 900L-2
272mm x 355mm
NO
Junction Box
800mm
Square
Page 1 of 2
N/A
1100mm
Square
800mm
1100mm
400mm400mmMaximum Height(H =)
ConversionTop/Back Back/Top
Electrical Connection
Filter Size
Model
N/A
Version: B 20/01/2015F
Minimum Height(H =)
PowderKote AvailableAll-thread Fixing Centres
900mm
LAM 900L-2
N/A
510mm
2
Cool
3
2
YES
Body Width
Motor Qty
Motor Box /Flue Width
Model
900mm
Cool
N/A
LAM 900L-1
Light Qty
Condari Pty Ltd.
Corner Type
Light Centres
Filter Qty
LED Light
Nightlight
1
510mm
3
YES
2
Power entry locationis the same for all
Lamont models.
510
H
All-Thread rods
are
supplied
for
extra
support.
LAMONT - LAM
Qasair Rangehoods Installation Instructions60
LamontTechnical Specification Sheet
LAM Wall Mounted
LAM 1200L-2
2
3
510mm
YESYES
2
1200mm
N/A
22
N/A
Cool
1000mm
LAM 1000L-2
Cool
Light Centres
Filter Qty
Nightlight
Light Qty
LED Light
Motor Qty
Model
Body Width
Maximum Height(H =)
Corner Type
648mm
Condari Pty Ltd.
4
All-thread Fixing Centres
PowderKote Available
Filter SizeConversionTop/Back Back/Top
Page 2 of 2
Motor Box /Flue Width
Minimum Height(H =)
Model
Electrical Connection
400mm
NO
LAM 1000L-2
290mm x 355mm
Version: B 20/01/2015F
N/A
1100mm
Junction Box Junction Box
NO
1100mm
N/A
400mm
Square
800mm
Square
950mm
272mm x 355mm
LAM 1200L-2
Power entry locationis the same for all
Lamont models.
510
75
250H
20250
All-Thread rods
are
supplied
for
extra
support.
LAMONT - LAM
Qasair Rangehoods Installation Instructions 61
BarclayTechnical Specification Sheet
BAR Wall Mounted
Light Centres
Filter Qty
All-thread Fixing Centres
Varies depending onlength of rangehoodVaries depending onlength of rangehood Corner Type
Page 1 of 1
PowderKote Available
Condari Pty Ltd.
Varies depending onlength of rangehood
YES
Varies depending on length of rangehood
Nightlight
Light Qty
Varies depending onlength of rangehood
Varies depending onlength of rangehood
1800mm-2400mm
Model BAR 2400-3000L-2
900mm,1000mm,1200mm
Model
Body Width
LED Light
2 Junction Box
550mm
Motor Qty
1550mmYES
CoolCool
2
Filter Size2400mm-3000mm
BAR 1800-2400L-2
900mm,1000mm,1200mm ConversionTop/Back Back/Top
Motor Box /Flue Width
N/A
Square
Version: B 20/01/2015F
Junction Box
N/A
Square
BAR 1800-2400L-2Varies depending onlength of rangehood
NO
N/A
BAR 2400-300L-2
NO
Maximum Height(H =)
Electrical ConnectionMinimum Height(H =)
N/A
Varies depending onlength of rangehood
1550mm
550mm
510
H
2025075
250
Power entry locationis the same for all
Barclay models. Motor Box can be either L/H or R/H.
100
Optional Design
BARCLAY - BAR
Qasair Rangehoods Installation Instructions62
Motor Box /Flue Width
Condari Pty Ltd. Page 1 of 2Version: A 01/07/2014F
Body Width
Model
Motor Qty
Light Centres
Light Qty
Nightlight
LED Light
Filter Qty
Model
Filter SizeConversionTop/Back Back/Top
Electrical ConnectionMinimum Height(H =)Maximum Height(H =)PowderKote AvailableAll-thread Fixing CentresCorner Type
MAR 900L-1 MAR 1200L-2MAR 900L-2MAR 900L-1MAR 1200L-2MAR 900L-2
900mm
422mm
2
N/A
1
Cool
YES
2
422mm x 272mm
NO
Junction Box
N/A
N/A
N/A
N/A
Square
900mm
N/A
2
Cool
YES
2
422mm
2
1200mm
N/A
2
Cool
YES
2
544mm
4
422mm x 272mm
NO
Junction Box
N/A
N/A
N/A
N/A
Square
272mm x 272mm
NO
Junction Box
N/A
N/A
N/A
N/A
Square
MartellTechnical Specification Sheet
MAR Wall Mounted
Power entry locationis the same for all
Martell models.
510
500
11020
20
300110
148
700
MARTELL - MAR
Qasair Rangehoods Installation Instructions 63
MartellTechnical Specification Sheet
MAR Wall Mounted
Model
ConversionTop/Back Back/Top
Minimum Height(H =)
Electrical Connection
Filter SizeBody Width
Motor Box /Flue Width
Model
Maximum Height(H =)
MAR 1500L-3
272mm x 272mm
N/A
All-thread Fixing CentresCorner Type
Version: A 01/07/2014F
422mm
4
Condari Pty Ltd.
Square
N/A
N/A
Square
N/A
Motor Qty
Page 2 of 2
N/A
N/A
Nightlight
Light Qty
N/A
1500mm
MAR 1500L-3
816mm
5
LED Light
Light Centres
Filter Qty
Junction Box
NO
MAR 1800L-3
3
MAR 1800L-3
3
YES
2
Cool
4
N/ACool
YES
N/A
1800mm 422mm x 272mm
NO
Junction Box
N/A
PowderKote Available
Power entry locationis the same for all
Martell models.
148
110300
20
20110
500
510
700
MARTELL - MAR
Qasair Rangehoods Installation Instructions64
MajesticTechnical Specification Sheet
MAJ Wall Mounted
2
350mm
Minimum Height(H =)
Light Centres
Light Qty
900mm
MAJ 900L-1
LED Light
ConversionTop/Back Back/Top
Nightlight
3
Condari Pty Ltd.
Filter Qty 3
Motor Qty
Motor Box /Flue Width
600mm
Version: B 29/11/2014F
Body Width
Model MAJ 900L-1
Page 1 of 2
Filter Size 272mm x 272mm
NO
MAJ 900L-2
Square Square
600mm
MAJ 1000L-2
600mm
N/A
1150mmMaximum Height(H =)PowderKote Available
Corner Type
Electrical Connection
N/AAll-thread Fixing Centres
1000mm
N/A
Cool
22
MAJ 900L-2
Cool
350mm
22
350mm
YES
Junction Box
NO
Junction Box
1150mm 1150mm
NO
N/A
Square
600mm 600mm
422mm x 272mm272mm
x 272mm
600mm
Junction Box
ModelMAJ 1000L-2
YESYES
1
N/A
Cool
N/A
900mm
2
H
300
500
Power entry locationis the same for allMajestic models.
150
All-Thread rods
are
supplied
for
extra
support.
MAJESTIC - MAJ
Qasair Rangehoods Installation Instructions 65
MajesticTechnical Specification Sheet
MAJ Wall Mounted
272mm x 272mm
MAJ 1500L-2
ConversionTop/Back Back/Top
Filter Size
Model
1500mm
N/A
Page 2 of 2Condari Pty Ltd.
YES
Minimum Height(H =)
PowderKote Available
NO
MAJ 1500L-2
N/A
600mm
5
2
Cool
22
2
YES
Cool
1200mm
4
Motor Box /Flue Width
Model
LED Light
Light Centres
Filter Qty
500mm
Maximum Height(H =)
Electrical Connection
800mm
1150mm
N/A
Junction Box
Version: B 29/11/2014F
1150mm
Junction Box
600mm
All-thread Fixing CentresCorner Type Square
1100mm
Square
N/A
600mm
272mm x 272mm
NO
MAJ 1200L-2MAJ 1200L-2
Body Width
Nightlight
Motor Qty
Light Qty
Power entry locationis the same for allMajestic models.
500
300
H150
All-Thread rods
are
supplied
for
extra
support.
MAJESTIC - MAJ
Qasair Rangehoods Installation Instructions66
FasanoTechnical Specification Sheet
FAS Wall Mounted
Light Centres
Filter Qty
All-thread Fixing Centres648mm
4 Corner Type
Page 1 of 1
PowderKote Available
Condari Pty Ltd.
2
YES
510mm
Nightlight
Light Qty
3
2
900mm
Model FAS 1200L-2
N/A
Model
Body Width
LED Light
2 Junction Box
700mm
Motor Qty
1400mmYES
CoolCool
2
Filter Size1200mm
FAS 900L-2
N/A ConversionTop/Back Back/Top
Motor Box /Flue Width
300mm x 500mm
Square
Version: C 20/01/2015F
Junction Box
300mm x 800mm
Square
FAS 900L-2
272mm x 355mm
NO
YES
FAS 1200L-2
NO
Maximum Height(H =)
Electrical ConnectionMinimum Height(H =)
YES
272mm x 355mm
1400mm
700mm
Power entry locationis the same for all
Fasano models.
510
250
250
75 50
360
H
All-Thread rods are supplied for extra support.
FASANO - FAS
Qasair Rangehoods Installation Instructions 67
INSTALLATION INSTRUCTIONS • 4F • PRE / FRA • SQ 420 / MOL • FPR • MA • HAM • BUR / LAM • D 400 / D 500 / SEN
It is recommended that the rangehood be mounted 100mm back from the edge of the benchtop.
1. The rangehood can be installed between 700mm and 800mm above the cooking surface. The installer should check for local requirements in case additional provisions apply.
2. It is advisable to remove fans for easier handling of unit by removing retaining bolts or clips and unplugging electrical connector.
3. Measure hole centres and duct size on top of the rangehood. This will vary with the hood size, model and number of fans fitted and will determine the ducting required.
4. Using a plumb line, mark the ceiling before making the cut out. Check for obstructions like electrical cables etc.5. Cut two (2) supporting beams approximately 1.0m long and pre-drill hole centres so that the supporting beams
are 90 degrees to the ceiling joists.6. Fit 8mm all thread (threaded rod) through holes provided and secure with nuts and washers.7. Level unit by tensioning the 8mm nuts. Do not over tighten.8. Fit off ducting as required.
Installation must be carried out by the procedure outlined. Failure to do so may void the guarantee. Electrical: Wiring to the appliance must comply with State and local Regulations. Connection to be carried out by a registered electrician.
Installation Suggestions1) 2)
Qasair Rangehoods Installation Instructions68
4 FlareTechnical Specification Sheet
4F Ceiling Mounted
Model 4F 900L-2 4F 1200L-2
Body Width 272mm x 422mm
Corner Type
Condari Pty Ltd.
All-thread Fixing Centres
ConversionTop/Back Back/Top
Filter Size
2
YES
PowderKote Available
293mm x 140mm
Version: C 20/01/2015F Page 1 of 1
648mm
Maximum Height(H =)
343mm x 140mm°
YES
Round
1660mm
N/A
480mm
4
Cool
2
3
510mm
Light Qty
Filter Qty
Light Centres
Nightlight
Motor Qty
LED Light
Motor Box /Flue Width
Minimum Height(H =)
Round
YES
Model4F 1200L-24F 900L-2
10 Amp Lead
Cool
900mm
350mm
2
400mm
1200mm
YES
2
Electrical Connection 10 Amp Lead
N/A
272mm x 422mm
480mm
1660mm
Power Entry
Ø15mm Radius
Power Entry
A Transition is supplied to suit standard DL2 ducting.
600
80480
H
200
Ø15mm Radius
160
4 FLARE - 4F
Qasair Rangehoods Installation Instructions 69
PresidentTechnical Specification Sheet
PRE Ceiling Mounted
Model
Body Width
Motor Box /Flue Width
PRE 900L-2
Condari Pty Ltd.
Corner Type
Motor Qty
Nightlight
Light QtyAll-thread Fixing Centres
Maximum Height(H =)
4
648mm510mm
Cool
3Filter Qty
Light Centres
LED Light
360mm x 250mm 360mm
x 250mm
1600mm
YES
272mm x 422mm
PRE 900L-2
Electrical Connection
NO
550mm
10 Amp Lead
Version: C 20/01/2015F
Round
550mm
YES
Page 1 of 2
Round
900mm
420mm
2
YES
2
PRE 1200L-2 Model
1600mm
NO
10 Amp Lead
PowderKote Available
Minimum Height(H =)
2
Cool
YES
2
1200mm
420mm
Filter SizeConversionTop/Back Back/Top
PRE 1200L-2
272mm x 422mm
Power Entry
100
H
85 85250420
Power Entry600
Ø15mm Radius
Ø15mm Radius
PRESIDENT - PRE
Qasair Rangehoods Installation Instructions70
840mm x 270mm
Round
840mm x 270mm
Round
YES
550mm
10 Amp Lead
NO NO
1600mm
10 Amp Lead
Round
PowderKote Available
360mm x 250mmAll-thread
Fixing Centres
3
Cool
1800mm
900mm
Maximum Height(H =)
42
816mm
6
422mm
5
Cool
YES YES
900mm
1500mm
Cool
3
PRE 1500L-3 PRE 1800L-3
420mm
2
YES
2
10 Amp Lead
NO
PRE 1500L-2
272mm x 422mm
YES
550mm
272mm x 422mm 290mm
x 422mm
1600mm
Model
ConversionTop/Back Back/Top
550mm
YES
1600mm
PRE 1800L-3
Corner Type
Electrical ConnectionMinimum Height(H =)
PRE 1500L-3
Condari Pty Ltd.
Filter Size
816mm
5
1500mm
LED Light
Filter Qty
PRE 1500L-2
Motor Box /Flue WidthMotor Qty
Light Centres
Light Qty
Nightlight
Model
Body Width
Version: C 20/01/2015F Page 2 of 2
PresidentTechnical Specification Sheet
PRE Ceiling Mounted
Power Entry
25085
H
100
85
420
Power Entry
600
Ø15mm Radius
Ø15mm Radius
PRESIDENT - PRE
Qasair Rangehoods Installation Instructions 71
MaddisonTechnical Specification Sheet
MA Ceiling Mounted
Light Centres
Filter Qty
All-thread Fixing Centres
Varies depending onlength of rangehoodVaries depending onlength of rangehood Corner Type
Page 1 of 1
PowderKote Available
Condari Pty Ltd.
Varies depending onlength of rangehood
YES
Varies depending onlength of rangehood
Nightlight
Light Qty
Varies depending onlength of rangehood
Varies depending onlength of rangehood
2000mm-2500mm
Model MA 2500-3000L-4
420mm
Model
Body Width
LED Light
4 10 Amp Lead
550mm
Motor Qty
1600mmYES
CoolCool
4
Filter Size2500mm-3000mm
MA 2000-2500L-4
420mm ConversionTop/Back Back/Top
Motor Box /Flue Width
360mm x 250mm
Square
Version: B 26/11/2014F
10 Amp Lead
360mm x 250mm
Square
MA 2000-2500L-4Varies depending onlength of rangehood
N/A
N/A
MA 2500-3000L-4
N/A
Maximum Height(H =)
Electrical ConnectionMinimum Height(H =)
N/A
Varies depending onlength of rangehood
1600mm
550mm
H
Motor Box
WidthMotor
Box
Width250 250
420
250
Flues are equally spacedacross the body width.
Power Entry.
150
2020
Body Width 600
Equal Equal Equal
MADDISON - MA
Qasair Rangehoods Installation Instructions72
WintonTechnical Specification Sheet
SQ 420 Ceiling Mounted
ConversionTop/Back Back/Top
Filter Size
Model
Electrical ConnectionMinimum Height(H =)Maximum Height(H =)PowderKote AvailableAll-thread Fixing Centres
Page 1 of 1
Corner Type
YES
Filter Qty 1
Motor Qty
Light Qty
Light Centres
Motor Box /Flue Width
Body Width
Model
Cool
YES
1
SQ 420L-2
2
420mm
N/A
Centre
LED Light
Nightlight
Condari Pty Ltd.
10 Amp Lead
SQ 420L-2
Square
Version: B 27/11/2014F
NO
250mm X 320mm
1450mm
520mm
355mm x 250mm
Front
Power Entry.
420 420
H
85 250 85 85 250 85
WINTON - SQ
Qasair Rangehoods Installation Instructions 73
MolinaTechnical Specification Sheet
MOL Ceiling Mounted
ConversionTop/Back Back/Top
Filter Size
Model
Electrical ConnectionMinimum Height(H =)Maximum Height(H =)PowderKote AvailableAll-thread Fixing Centres
Page 1 of 1
Corner Type
N/A
Filter Qty 1
Motor Qty
Light Qty
Light Centres
Motor Box /Flue Width
Body Width
Model
Cool
YES
1
MOL 420L-2
2
420mm
N/A
Centre
LED Light
Nightlight
Condari Pty Ltd.
10 Amp Lead
MOL 420L-2
Square
Version: B 27/11/2014F
NO
250mm X 320mm
1100mm
520mm
355mm x 250mm
85 250 85
420 420
85 250 85
Power Entry.
H
Front
MOLINA - MOL
Qasair Rangehoods Installation Instructions74
HamiltonTechnical Specification Sheet
HAM Ceiling Mounted
Light Centres
Filter Qty
All-thread Fixing Centres648mm
4 Corner Type
Page 1 of 1
PowderKote Available
Condari Pty Ltd.
2
YES
510mm
Nightlight
Light Qty
3
2
900mm
Model HAM 1200L-2
N/A
Model
Body Width
LED Light
2 10 Amp Lead
700mm
Motor Qty
1400mmYES
CoolCool
2
Filter Size1200mm
HAM 900L-2
N/A ConversionTop/Back Back/Top
Motor Box /Flue Width
500mm x 230mm
Square
Version: C 20/01/2015F
10 Amp Lead
800mm x 230mm
Square
HAM 900L-2
272mm x 422mm
NO
YES
HAM 1200L-2
NO
Maximum Height(H =)
Electrical ConnectionMinimum Height(H =)
YES
272mm x 422mm
1400mm
700mm
600
H
30025 25
Power entry locationis the same for allHamilton models.
250
Front
Front
HAMILTON - HAM
Qasair Rangehoods Installation Instructions 75
FremontTechnical Specification Sheet
FPR Ceiling Mounted
Light Centres
Filter Qty
All-thread Fixing Centres
Varies depending onlength of rangehoodVaries depending onlength of rangehood Corner Type
Page 1 of 1
PowderKote Available
Condari Pty Ltd.
Varies depending onlength of rangehood
YES
Varies depending onlength of rangehood
Nightlight
Light Qty
Varies depending onlength of rangehood
Varies depending onlength of rangehood
1600mm-2600mm
Model FPR 2600-3600L-2
420mm
Model
Body Width
LED Light
2 10 Amp Lead
550mm
Motor Qty
1600mmYES
CoolCool
2
Filter Size2600mm-3600mm
FPR 1600-2600L-2
420mm ConversionTop/Back Back/Top
Motor Box /Flue Width
360mm x 250mm
Square
Version: A 20/01/2015F
10 Amp Lead
360mm x 250mm
Square
FPR 1600-2600L-2Varies depending onlength of rangehood
N/A
N/A
FPR 2600-3600L-2
N/A
Maximum Height(H =)
Electrical ConnectionMinimum Height(H =)
N/A
Varies depending onlength of rangehood
1600mm
550mm
Power Entry.
Motor Box
can
be
either L/H
or
R/H
600
150
H
25020420
Support Alternatives
Rigging Round Square Square w-cross
brace
Ø16mm S-S
Tube 25mm
x 25mm
SQ
S-S
Tube 25mm
x 25mm
SQ
S-S
Tube
These centre
dimensions
are
typical for
all
support
fixings
FREMONT - FPR
Qasair Rangehoods Installation Instructions76
BurdettTechnical Specification Sheet
BUR Ceiling Mounted
Motor Box /Flue Width
Body Width
LED Light
Motor Qty
Model
PowderKote Available
Maximum Height(H =)
N/A
BUR 900L-2
900mm
Cool
BUR 1000L-2
3
510mm All-thread Fixing CentresCorner Type
Condari Pty Ltd.
Light Centres
Light Qty
Nightlight
Page 1 of 3
Filter Qty
Electrical Connection
ConversionTop/Back Back/Top
Model
Minimum Height(H =) 400mm
NO
10 Amp Lead
272mm x 422mm
BUR 900L-2
3
510mm
YES
500mm x 900mm
1450mm
Square
500mm x 800mm
Square
1450mm
YES
10 Amp Lead
Version: C 20/01/2015F
YES2 2
YES
N/A
Cool
2
1000mm
2
Filter Size 290mm x 422mm
400mm
BUR 1000L-2
NO
Power entry locationis the same for all
Burdett models.
600
H
250 Front
Front
BURDETT - BUR
Qasair Rangehoods Installation Instructions 77
BurdettTechnical Specification Sheet
BUR Ceiling Mounted
Version: C 20/01/2015F
500mm x 1100mm
Square
500mm x 1100mm
Square
400mm
1450mm
10 Amp Lead
BUR 1200L-3
NO
272mm x 422mm
YES
BUR 1200L-2
NO
272mm x 422mm
Page 2 of 3
YES
400mm
1450mm
10 Amp Lead
Body Width
Motor Box /Flue Width
Nightlight
Motor Qty
LED Light
Light Qty
N/A
2
Cool
YES
2
N/A
3
Cool
YES
4
648mm
2
BUR 1200L-3
1200mm
Model
1200mm
BUR 1200L-2
Filter Qty 4
Light Centres 648mm
Condari Pty Ltd.
Corner Type
PowderKote Available
ConversionTop/Back Back/Top
Filter Size
Model
Electrical Connection
Maximum Height(H =)
All-thread Fixing Centres
Minimum Height(H =)
Power entry locationis the same for all
Burdett models.
600
H
Front
Front
BURDETT - BUR
Qasair Rangehoods Installation Instructions78
BurdettTechnical Specification Sheet
BUR Ceiling Mounted
All-thread Fixing CentresCorner Type
Motor Box /Flue WidthMotor Qty
Model
Body Width
Condari Pty Ltd.
Maximum Height(H =)
Minimum Height(H =)
PowderKote Available
5
Electrical Connection
1500mm
N/A
3
Page 3 of 3
816mm
N/A
BUR 1500L-2
1500mm
Filter Qty
Light Centres
Light Qty
Nightlight
LED Light
5
Model
Filter SizeConversionTop/Back Back/Top
Version: C 20/01/2015F
500mm x 1400mm
Square
500mm x 1400mm
Square
Cool
YES
BUR 1500L-3
YES
2
Cool
2
816mm
272mm x 422mm
BUR 1500L-2
YES
1450mm
400mm
NO
10 Amp Lead
BUR 1500L-3
2
400mm
1450mm
10 Amp Lead
NO
272mm x 422mm
YES
Power entry locationis the same for all
Burdett models.
600
H
Front
Front
BURDETT - BUR
Qasair Rangehoods Installation Instructions 79
BelgradTechnical Specification Sheet
BEL Ceiling Mounted
Motor Box /Flue Width
Body Width
LED Light
Motor Qty
Model
PowderKote Available
Maximum Height(H =)
N/A
BEL 900L-2
900mm
Cool
BEL 1000L-2
3
510mm All-thread Fixing CentresCorner Type
Condari Pty Ltd.
Light Centres
Light Qty
Nightlight
Page 1 of 2
Filter Qty
Electrical Connection
ConversionTop/Back Back/Top
Model
Minimum Height(H =) 400mm
NO
10 Amp Lead
272mm x 422mm
BEL 900L-2
3
510mm
YES
500mm x 900mm
1100mm
Square
500mm x 800mm
Square
1100mm
N/A
10 Amp Lead
Version: B 20/01/2015F
N/A2 2
YES
N/A
Cool
2
1000mm
2
Filter Size 290mm x 422mm
400mm
BEL 1000L-2
NO
Power entry locationis the same for all
Belgrad models.
600
H
250 Front
Front
BELGRAD - BEL
Qasair Rangehoods Installation Instructions80
BelgradTechnical Specification Sheet
BEL Ceiling Mounted
Version: B 20/01/2015F
500mm x 1100mm
Square
500mm x 1100mm
Square
400mm
1100mm
10 Amp Lead
BEL 1200L-3
NO
272mm x 422mm
N/A
BEL 1200L-2
NO
272mm x 422mm
Page 2 of 2
N/A
400mm
1100mm
10 Amp Lead
Body Width
Motor Box /Flue Width
Nightlight
Motor Qty
LED Light
Light Qty
N/A
2
Cool
YES
2
N/A
3
Cool
YES
4
648mm
2
BEL 1200L-3
1200mm
Model
1200mm
BEL 1200L-2
Filter Qty 4
Light Centres 648mm
Condari Pty Ltd.
Corner Type
PowderKote Available
ConversionTop/Back Back/Top
Filter Size
Model
Electrical Connection
Maximum Height(H =)
All-thread Fixing Centres
Minimum Height(H =)
Power entry locationis the same for all
Belgrad models.
600
H
Front
Front
BELGRAD - BEL
Qasair Rangehoods Installation Instructions 81
AlbanyTechnical Specification Sheet
D Ceiling Mounted
Light Centres
Filter Qty
All-thread Fixing CentresCentre
1 Corner Type
Page 1 of 1
PowderKote Available
Condari Pty Ltd.
1
NO
Centre
Nightlight
Light Qty
1
1
400mm
Model D 500L-2
N/A
Model
Body Diameter
LED Light
1 10 Amp Lead
550mm
Motor Qty
1500mmYES
CoolCool
2
Filter Size500mm
D 400L-1
N/A ConversionTop/Back Back/Top
Motor Box /Flue Width
300mm x 160mm
N/A
Version: A 01/07/2014F
10 Amp Lead
410mm x 160mm
N/A
D 400L-1
272mm x 272mm
N/A
N/A
D 500L-2
N/A
Maximum Height(H =)
Electrical ConnectionMinimum Height(H =)
N/A
379mm x 290mm
1500mm
650mm
Power Entry.
Power Entry.
All-Thread
All-T
hrea
d
235
110
Body Diameter
Body Diameter
All-Thread
All-T
hrea
d
250
250
90
D400 & D500Instructions
1. Remove Rangehood from packaging and place on a flat clean surface. 2. Remove the filter.
3. Remove the four screws in the corners of the filter apperture.
4. Gently pull the base from the tube.
5. Once removed, the power supply plug becomes visible. Disconnect and place the base assembly to one side. 6. Place the four lengths of All'thread Rod through the holes in the hood and (make sure the seam is facing the right direction) secure through a brace in the ceiling. Feed the plug and cord into the ceiling space. 7. Fit nuts to top and bottom of All'thread Rods and tighten. 8. Reconnect the power plug and reinstall base assembly. 9. Connect power supply in ceiling and test Rangehood.
10. Fit off ducting as required.
Do not use flexible ducting.Do not reduce duct size.All duct pieces are available from 'Condari' or through your dealer.
1. Remove Rangehood from packaging and place on a flat clean surface.2. Remove the filter.3. Remove the four screws in the corners of the filter apperture.4. Gently pull the base from the tube.5. Once removed, the power supply and fan plug becomes visible. Disconnect and place the base assembly to one side.6. Place the four lengths of All-thread Rod through the holes in the hood and (make sure the seam is facing the right direction) secure through a brace in the ceiling. Feed the plug and cord into the ceiling space.7. Fit nuts to top and bottom of All-thread Rods and tighten.8. Reconnect the power plug and reinstall base assembly.9. Connect power supply in ceiling and test Rangehood.10. Fit off ducting as required
D 400L-1 / SEN 400L-1D 500L-2 / SEN 500L-2
Qasair Rangehoods Installation Instructions82
AlbanyTechnical Specification Sheet
D Ceiling Mounted
Light Centres
Filter Qty
All-thread Fixing CentresCentre
1 Corner Type
Page 1 of 1
PowderKote Available
Condari Pty Ltd.
1
NO
Centre
Nightlight
Light Qty
1
1
400mm
Model D 500L-2
N/A
Model
Body Diameter
LED Light
1 10 Amp Lead
550mm
Motor Qty
1500mmYES
CoolCool
2
Filter Size500mm
D 400L-1
N/A ConversionTop/Back Back/Top
Motor Box /Flue Width
300mm x 160mm
N/A
Version: A 01/07/2014F
10 Amp Lead
410mm x 160mm
N/A
D 400L-1
272mm x 272mm
N/A
N/A
D 500L-2
N/A
Maximum Height(H =)
Electrical ConnectionMinimum Height(H =)
N/A
379mm x 290mm
1500mm
650mm
Power Entry.
Power Entry.
All-Thread
All-T
hrea
d
235
110
Body Diameter
Body Diameter
All-Thread
All-T
hrea
d
250
250
90
ALBANY - D
Qasair Rangehoods Installation Instructions 83
SenecaTechnical Specification Sheet
SEN Ceiling Mounted
Light Centres
Filter Qty
All-thread Fixing CentresCentre
1 Corner Type
Page 1 of 1
PowderKote Available
Condari Pty Ltd.
1
NO
Centre
Nightlight
Light Qty
1
1
400mm
Model SEN 500L-2
N/A
Model
Body Diameter
LED Light
1 10 Amp Lead
550mm
Motor Qty
1100mmYES
CoolCool
2
Filter Size500mm
SEN 400L-1
N/A ConversionTop/Back Back/Top
Motor Box /Flue Width
300mm x 160mm
N/A
Version: A 01/07/2014F
10 Amp Lead
410mm x 160mm
N/A
SEN 400L-1
272mm x 272mm
N/A
N/A
SEN 500L-2
N/A
Maximum Height(H =)
Electrical ConnectionMinimum Height(H =)
N/A
379mm x 290mm
1100mm
650mm
Power Entry.
Power Entry.
All-Thread
All-T
hrea
d
235
110
Body Diameter
Body Diameter
All-Thread
All-T
hrea
d
25025
0
90
SENECA - SEN
Qasair Rangehoods Installation Instructions84
110. DD-1-LDuct Director Left
102. HB-1 Horizontal Bend 90º
101. DL-1 Duct Length 1200mm DL-1C Duct Length (coloured)
105. BD/WV-H-1 MGS Back Draft Wall Vent Horizontal Marine Grade Stainless Steel
106. VB-1 Vertical Bend 90º
104. BD/WV-H-1 Back Draft Wall Vent Horizontal
108. BD/WV-V-1 Back Draft Wall Vent Vertical
107. VB-1/45 Vertical Bend 45º
109. BD/WV-V-1 MGS Back Draft Wall Vent Vertical
Marine Grade Staineless Steel
103. HB-1/45 Horizontal Bend 45º
101. DL-1E Duct Length Extendable 1200mm
101. DL-1A Duct Length 300mm
I/D Internal Diameter
SINGLE MOTOR DUCTING
NOTE:This Zinc Alume Strip is provided to join some duct pieces together. It will be clearly shown on the drawing of the piece it is supplied with.
Qasair Rangehoods Installation Instructions 85
120. DR-200/90 Round Bend 90º
122. AS-20 Back Draft Shutter
123. CH-200 Chairman’s Hat 200ø
124. CH-200 CBChairman’s Hat 200ø Colourbond
125. BD/RC-1 Back Draft Roof Cowl
121. BD-6/7/9 WV-R/R Rear Register Kit
112. TT-1 Twisted Transition
113. DLE-DLE Flue Joiner
119. DR-200/45 Round Bend 45º
116. TR-1 Rectangular to Round Transition
117. DR-200 Duct Length 200ø 1200mm
118. DR-200 CB Duct Length 200ø 1200mm Colourbond
115. CD-920 to DL-1 Cavity Duct to Duct Length
114. CD-920 Cavity Duct Extendable
111. DD-1-R Duct Director Right
SINGLE MOTOR DUCTING
Qasair Rangehoods Installation Instructions86
SINGLE MOTOR DUCTING
138. RCP-200 S/S Roof Cap 200ø Stainless Steel
137. WVC-6/7/9H-R/R Wall Vent Cover
133. WVC-V-1 Wall Vent Cover Vertical
136. EV/DL-1 Eave Vent Suit DL-1
132. WVC-H-1 MGS Wall Vent Cover Horizontal
Marine Grade Stainless Steel
134. WVC-V-1 MGS Wall Vent Cover Vertical
Marine Grade Stainless Steel
135. 6/7/900H-SC Spiggot Cap
130. CF-6/7/900H Ceiling Flange 6/7/900H
131. WVC-H-1 Wall Vent Cover Horizontal
139. RC-200 S/S Roof Cowl 200ø Stainless Steel
140. RC-200 Roof Cowl 200ø Zinc Alumne
127. BD/SQ-RC 200 Back Draft Roof Cowl 200ø
128. DLE-S/S CAP Stainless Steel Cap
129. BD/M-1 Back Draft Damper
126. BD/RC-1 CB Back Draft Roof Cowl Colourbond
Qasair Rangehoods Installation Instructions 87
WALL VENT
144. FRWV-V-1 Fire Rated Wall Vent Vertical
143. FRWV-H-1 Fire Rated Wall Vent Horizontal
142. FRC-200 Fire Rated Roof Cowl 200ø Grade 445 Stainless Steel.
141. RC-1 S/S Roof Cowl Single Motor Stainless Steel
WALL VENT
The wall vent and wall vent cover are made from 445M2 grade stainless steel which has a higher content of the corrosion element, chromium. The wall vent covers have stainless steel screening type 316 grade and meets the requirements for stainless steel screening under the Australian Standard AS 3959-2009 Construction of Buildings in Bushfire-prone areas, and are BAL 29 and BAL 40 compliant.
FIRE RATED WALL VENT SPECIFICATIONS
Qasair Rangehoods Installation Instructions88
212. DLE-2 to DLE-2 Flue Joiner
210. BD/WV-V-2 MGS Back Draft Wall Vent
Marine Grade Stainlerss Steel
209. BD/WV-V-2 Back Draft Wall Vent
203. HB-2 Horizontal Bend 90º
208. VB-2/45 Vertical Bend 45º
207. VB-2 Vertical Bend 90º
206. BD/WV-H-2 MGS Back Draft Wall Vent
Marine Grade Stainless Steel205. BD/WV-H-2
Back Draft Wall Vent204. HB-2/45
Horizontal Bend 45º
202. DL-2 Duct Length 1200mm
201. TMT Twin Motor Transition to DL-2
211. TT-2 Twisted Transition
I/D Internal Diameter
TWIN MOTOR DUCTING
NOTE:This Zinc Alume Strip is provided to join some duct pieces together. It will be clearly shown on the drawing of the piece it is supplied with.
Qasair Rangehoods Installation Instructions 89
224. HB-250 Horizontal Bend 250sq 90º
223. DL-250 Duct Length 250sq 1200mm with Strap
222. TMT-250 Twin Motor to 250sq
220. DL-2 to 250SQ Rectangular to Square Transition
221. TMT-250/300 Transition from 250sq to 300º
219. DR-300/90 Round Bend 90º
225. HB-250/45 Horizontal Bend 250sq 45º
226. TMT-250/90-L Duct Director 250sq Left
227. TMT-250/90-R Duct Director 250sq Right
218. DR-300/45 Round Bend 45º
217. DR-300 CB Duct Length 300ø 1200mm Colourbond
216. DR-300 Duct Length 300ø 1200mm
215. TR-2 Transition from DL-2 to 300ø
214. TMT-300 Transition to 300ø
213. BD-10/12/15-WV-R/R Rear Register Kit
TWIN MOTOR DUCTING
Qasair Rangehoods Installation Instructions90
232. CH-300 Chairman’s Hat 300ø
233. CH-300 CB Chairman’s Hat 300ø Colourbond
234. BD/SQ-RC-300 Back Draft Roof Cowl 300ø
236. DLE-2-SS CAP Flue Cap
237. CF-10/12/1500H Ceiling Flange10/12/1500H
235. BD/RC-250SQ Back Draft Roof Cowl 250sq
239. CF-3F1200-2 Ceiling Flange 3F1200-2
240. CF-4F900-2 Ceiling Flange 4F900-2
238. CF-3F900-2 Ceiling Flange 3F900-2
230 BD/RC-2 Back Draft Roof Cowl
229. BD/WV-250SQ MGS Back Draft Wall 250sq Marine Grade
Stainless Steel
231. BD/RC-2 CB Back Draft Roof Cowl Colourbond
242. WVC-H-2 Wall Vent Cover Horizontal
241. CF-4F1200-2 Ceiling Flange 4F1200-2
228. BD/WV-250SQ Back Draft Wall 250sq
TWIN MOTOR DUCTING
Qasair Rangehoods Installation Instructions 91
244. WVC-V-2 Wall Vent Cover Vertical
245. WVC-V-2 MGS Wall Vent Cover Vertical Marine Grade
Stainless Steel
246. WVC-250SQ Wall Vent Cover 250sq
250. DD-2H-L Duct Director Horizontal Left
248. WVC-10/12/1500H Wall Vent Cover 10/12/1500H
247. WVC-250SQ MGS Wall Vent Cover 250sq Marine Grade
Stainless Steel
249. 10/12/1500H-SC Spiggot Cap 10/12/1500H
253. DD-2V-R Duct Director Vertical Right
254. EV/DL-2 Eave Vent to Suit DL-2
256. AS-25 Back Draft Shutter
257. BD/WVC-SBS Back Draft Wall Vent Cover
255. BD/M-250SQ Back Draft Damper 250sq
243.WVC-H-2 MGS Wall Vent Cover Horizontal
Marine Grade Stainless Steel
251. DD-2H-R Duct Director Horizontal Right
252. DD-2V-L Duct Director Vertical Left
TWIN MOTOR DUCTING
Qasair Rangehoods Installation Instructions92
261. RC-300 S/S Roof Cowl Twin Motor Stainless Steel
262. RC-2 S/S Roof Cowl Twin Motor Stainless Steel
258. CF 3F-1500-2 Ceiling Flange 3F-1500-2
259. RCP-300 S/S Roof Cap 300ø Stainless Steel
260. RV-300 S/S Roof Ventilation Cowl 300ø
Stainless Steel
263. FRC-300 S/SSFire Rated Roof Cowl
Grade 445 Stainless Steel
WALL VENT
265. FRWV-V-2 Fire Rated Wall Vent Vertical
266. FRWV-250sq Fire Rated Wall Vent 250sq
WALL VENT
The wall vent and wall vent cover are made from 445M2 grade stainless steel which has a higher content of the corrosion element, chromium. The wall vent covers have stainless steel screening type 316 grade and meets the requirements for stainless steel screening under the Australian Standard AS 3959-2009 Construction of Buildings in Bushfire-prone areas, and are BAL 29 and BAL 40 compliant.
FIRE RATED WALL VENT SPECIFICATIONS
WALL VENT264. FRWV-H-2
Fire Rated Wall Vent Horizontal
TWIN MOTOR DUCTING
Qasair Rangehoods Installation Instructions 93
306. VB-3/45 Vertical Bend 45º
304. HB-3/45 Horizontal Bend 45º
305. VB-3 Vertical Bend 90º
302. DL-3 Duct Length 1200mm
303. HB-3 Horizontal Bend 90º
301. 3MT-DL-3 Three Motor Transition
307. TT-3 Twisted Transition
308. TMT-400x200/350 Transition from DL-3 to 350ø
311. DR-350 CB Duct Length 350ø Colourbond
310. DR-350 Duct Length 350ø
312. DR-350/45 Bend 45º 350ø
309. TR-3 Transition to 350ø
NOTE:This Zinc Alume Strip is provided to join some duct pieces together. It will be clearly shown on the drawing of the piece it is supplied with.
I/D Internal Diameter
TRIPLE MOTOR DUCTING
Qasair Rangehoods Installation Instructions94
324. WVC-H-3 Wall Vent Cover Horizontal
323. BD/WV-V-3 MGS Back Draft Wall Vent Vertical Marine Grade
Stainless Steel322. BD/WV-V-3
Back Draft Wall Vent Vertical
320. BD/WV-H-3 Back Draft Wall Vent Horizontal
321. BD/WV-H-3 MGS Back Draft Wall Vent Horizontal Marine Grade Stainless Steel
325.WVC-H-3 MGS Wall Vent Cover Horizontal
Marine Grade Stainless Steel326. WVC-V-3
Wall Vent Cover Vertical327. WVC-V-3 MGS
Wall Vent Cover Vertical Marine Grade Stainless Steel
317. BD/SQ-RC350 MGS Back Draft Roof Cowl 350ø
Marine Grade Stainless Steel318. CH-350
Chairmans Hat 350ø
319. CH-350 CB Chairmans Hat 350ø Colourbond
316. BD/SQ-RC350 Back Draft Roof Cowl 350ø
313. DR-350/90 Bend 90º 350ø
314. BD/RC-3 Back Draft Roof Cowl
315. BD/RC-3 MGS Back Draft Roof Cowl Marine Grade
Stainless Steel
TRIPLE MOTOR DUCTING
Qasair Rangehoods Installation Instructions 95
329. DD-3V-R Duct Director Vertical Right
328. DD-3V-L Duct Director Vertical Left
330. AS-35 Back Draft Shutter
332. FRWV-V-3 Fire Rated Wall Vent Vertical
WALL VENT
The wall vent and wall vent cover are made from 445M2 grade stainless steel which has a higher content of the corrosion element, chromium. The wall vent covers have stainless steel screening type 316 grade and meets the requirements for stainless steel screening under the Australian Standard AS 3959-2009 Construction of Buildings in Bushfire-prone areas, and are BAL 29 and BAL 40 compliant.
FIRE RATED WALL VENT SPECIFICATIONS
WALL VENT331. FRWV-H-3
Fire Rated Wall Vent Horizontal333. FRC-350
Fire Rated Roof Cowl
TRIPLE MOTOR DUCTING
Qasair Rangehoods Installation Instructions96
3. FA 60L-1 T 4. FA 60L-1 T
5. FA 60L-1 T 6. FA 60L-1 T / FA 60L-1 B
INSTALLATION IDEAS
Condari recommends Qasair and Condor Rangehoods be installed using ducting that is: • rigid • non-flammable • correctly sized to ensure maximum air movement and minimum noise levels.
Ducting incorrectly with flexible or smaller diameter ducting will dramatically reduce the air movement and increase the noise level of the rangehood and will void the manufac-turer’s warranty.
The Installation Ideas below will give you some guidelines on how to correctly duct your Qasair and Condor Rangehood using Qasair and Condor ducting pieces.
FA 60L-1 TFA 60L-1 B Rangehood
FA 60L-1 T Rangehood
FA 60L-1 T Rangehood
FA 60L-1 T Rangehood
Qasair Rangehoods Installation Instructions 97
7. FA 90L-2 T 8. FA 90L-2 T
9. FA 90L-2 T 10. FA 90L-2 B
11. FA 90L-2 T 12. FA 90L-2 T
FA 90L-2 T Rangehood
FA 90L-2 T Rangehood
FA 90L-2 T Rangehood
FA 90L-2 T Rangehood
FA 90L-2 T Rangehood
FA 90L-2 B Rangehood
Qasair Rangehoods Installation Instructions98
13. 600HL-1 T / 700HL-1 T / 900HL-1 T 14. 600HL-1 T
15. CON 60L-1 T 16. CON 80L-1 T
17. CON 60L-1 T 18. CON 80L-2 T
CON 80L-2 T RangehoodCON 60L-1 T Rangehood
CON 60L-1 T RangehoodCON 80L-1 T Rangehood
600HL-1 T Rangehood600HL-1 T / 700HL-1 T / 900HL-1 T Rangehood
Qasair Rangehoods Installation Instructions 99
19. 1200HL-2 T 20. LIS 800L-2 T
21. LIS 1000L-2 T 22. 3F 900L-2 T / 1200L-2 T
23. LIS 500L-1 T 24. LIS 800L-1 T
LIS 800L-2 TRangehood
1200HL-2 TRangehood
LIS 1000L-2 TRangehood
3F 900L-2 T / 1200L-2 TRangehood
LIS 800L-1 TRangehoodLIS 500L-1 T
Rangehood
Qasair Rangehoods Installation Instructions100
25. CON 80L-1 T / LIS 1000-2 T 26. LIS 1200L-2 B
1. FA 60L-1 B2. FA 90L-1 T
FA-60L-1 BRangehood
FA-90L-1 TRangehood
LIS 1200L-2 BRangehood
LIS 1000L-2 TRangehood
CON 80L-1 TRangehood
Qasair Rangehoods Installation Instructions 101
FILTER CLEANING
RANGEHOOD CLEANING
For the best results, please clean filters regularly. Condari recommends cleaning filters once per month, or immediately after heavy use.
You can do this by hand washing in warm soapy water, or by placing filters in the top rackof the dishwasher using a detergent of pH 8 or less. Note: Washing the filters in the dishwasher may cause discolouration of the filters.
Ensure the filters are completely dry before placing them back. Do not operate the rangehood without the filters installed.
Condari does not recommend the use of any citrus or industrial products, particularly corrosive, caustic or acid.
QASAIR rangehoods are made from stainless steel, either type 304 or type 316.
• Type 304 is classified as 18/8 stainless steel• Type 316 is classified as 18/10 stainless steel.
This means that the stainless is made of 18% nickel and either 8% or 10% of chromium respectively.
Stainless steel gets its protective coating from the chromium oxidising in the air to form a protective surface of chromium oxide.
Please use non-corrosive or non-abrasive cleaners (warm soapy water recommended).Stainless Steel cleaner may be used.
Qasair Rangehoods Installation Instructions102
CONDARI PTY LTD APPLIANCE GUARANTEE The benefits conferred by this warranty are in addition to all other rights and remedies in respect of the product which the consumer has under the Competition and Consumer Act 2010 and similar state and territory laws.
Condari P/L in Melbourne (and by their agency in Country Areas and other States) warrants that the appliance will be free from defects in materials and workmanship for a period of 36 months from the date of purchase of the appliance to the consumer.
If there is a breach of this warranty, Condari will rectify, free of charge, at it’s nearest service centre or authorised service agency any fault caused by faulty workmanship or material at the time of manufacture occurring in the appliance within 36 months from the date of delivery of the appliance to the customer.
This warranty is conditional upon the appliance being used only for personal, domestic and household purposes and installed and operated in accordance with QASAIR Instructions and does not apply to articles which by their nature are consumable.
If a defect is caused by neglect, misuse, or failure to follow operating instructions where special precautions are detailed for user attention then a charge shall be made for the service call.
For example:
With the filters the user is specifically requested:• To clean filter regularly by handwashing or placing in a dishwasher at least once a month.• To turn rangehood off after each use.
Where a claim is made under warranty, CONDARI reserves the right to determine whether or not the fault is caused by faulty workmanship or material or that the part is defective.
The consumer shall be fully responsible for all expenses whatsoever incidental to the removal of parts from the unit or to their replacement. Amongst other things, such responsibility shall extend to damaged walls, tiles, fixtures and fittings whether or not the unit has been built into a cupboard and irrespective of the stage either of its installation or the fitting of any other item whatsoever in its vicinity.
No other person, or firm or corporation is authorised by Condari to offer or give on its behalf any other greater warranty that given by Condari under this warranty.
Qasair Rangehoods Installation Instructions 103
EXCLUSIONS
There are some exclusions from the Condari Pty Ltd Guarantee. (on previous page)
CONDOR Rangehoods are designed to be used over all domestic barbecues available in AUSTRALIA.
QASAIR Rangehoods are not to be used over barbecues approved for outdoor use only.
Outdoor barbecues will have a rating plate on them specifying that they are approved for outdoor use only and also a mega joule rating per burner or a total mega joule rating.
In practice any barbecue or outdoor cooking appliance over 50 mega joule will need a specially made rangehood with an air movement exceeding 2000 cubic meters per hour.
QASAIR have hoods to go over domestic cookers such as VIKING, WOLF and CAPITAL cooking appliances. These brands have a mega joule rating of up to 95 mj and therefore special hoods are required for the appliances.
CONDARI will manufacture special rangehoods to go over commercial cooking appliances situated in domestic kitchens.
Once the heat output is over 50 mega joule a special rangehood is required.
Qasair Rangehoods Installation Instructions104
Date purchased
Purchased from
Model Serial No
The purchaser must fill in the above information and keep this with the original purchase document. This form must be produced if and when a claim is made under this warranty.
QASAIR Rangehoods are made in Ringwood, Australia.Tel: +61 3 9482 7088Fax: +61 3 9482 7011 Email: [email protected]
STANDARD WARRANTY
Qasair Rangehoods Installation Instructions 105
Qasair Rangehoods Installation Instructions106
Qasair Rangehoods Installation Instructions 107
DISTRIBUTED IN AUSTRALIA BY CONDARI PTY LTDTel: 1300 360 563HEAD OFFICE VIC Tel: 03 9482 7088 Fax: 03 9482 7011Email: [email protected]: www.condari.com.au
YOUR DISTRIBUTORS
NSW/ACT Tel: 02 9316 4599 Fax: 02 9316 9299 Email: [email protected] Tel: 07 3423 3503 Fax: 07 3282 9122 Email: [email protected] Tel: 08 9242 5387 Fax: 08 9201 0887 Email: [email protected] SA/NT Tel: 1300 360 563 Fax: 03 9482 7011 Email: [email protected] Tel: 03 9482 7088 Fax: 03 9482 7011 Email: [email protected]
N e w Z e a l a n d Kouzina Appliances155 The Strand, ParnellAuckland New Zealand Tel: +64 9 377 7822 Fax: +64 9 377 7824 Email: [email protected]
S i n g a p o r e
Eldric Marketing Pte Ltd176 Orchard Road#05-03 Centrepoint Singapore 238843Tel: +65 6369 1188 Fax: +65 6733 8133Email: [email protected]
www.condari.com.au
QASAIR RANGEHOODS MADE IN RINGWOOD 3134CONDARI RESERVES THE RIGHT TO CHANGE SPECIFICATION WITHOUT NOTICE
rev. 072015