QO Special solutions | EN | Version 1.3 | November 2014 3

ArtMeindividualitycanbeachievedbythecontinuously3Dmechanicaltransformationoftheelementsurfaceorfigurativelybydrawingontheelement.

1.2 artme

Twooptionsareavailable:Option 1: using pre-designedpatterns(3)Option 2: preparing individual designsattherequestofacustomer

ArtMeoffers3basicpre-fabricateddesignsorthecomponentsthatcanbeoptionallycombined.Thesedesigns,Concept 1aremarkedasbubbles,curvesandpuzzles.

Anadvantageofthisconceptisthatitisalreadytried-and-tested,hasoptimizedstaticsandenables quickandless expensive assembly.

Concept 2requirespattern confirmation with the Trimoexpertteam.

Possibilities

Fig. 1.9: Poznan Stadium, Poland Fig. 1.10: Blackburn Central High School, GB

QO Special solutions | EN | Version 1.3 | November 20144

1.3 curved elements

Possibilities:

Radius-r[m]:minimal4mandmoreThickness-S[mm]:80-240Length-R[m]:upto4mForm:Convex&ConcavePerformance:retainedthermalinsulation,fireresistance,soundinsulationConsultancy:foreachprojectwithnecessarilydata(r,S,Rprojectperformancedemands)

Fig. 1.11: Curved elements

M

R

S

r

1.3.1 Transversal curved

r

R

r

R

Fig. 1.11a: Curved elements - Convex

Fig. 1.11b: Curved elements - Concave

NOTE:all applications for use must be approved by Trimo's technical support.

QO Special solutions | EN | Version 1.3 | November 2014 5

Possibilities:

Radius-r[m]:minimal4mandmoreThickness-S[mm]:80-240Length-R[mm]:530-5700Form:Convex&ConcavePerformance:retainedthermalinsulation,fireresistance,soundinsulationConsultancy:foreachprojectwithnecessarilydata(r,S,R,projectperformancedemands)

Fig. 1.12: Curved elements

1.3.2 longitudinal curved

M

R

S

r

Fig. 1.12a: Curved elements - Convex Fig. 1.12b: Curved elements - Concave

r rM M

NOTE:all applications for use must be approved by Trimo's technical support.

QO Special solutions | EN | Version 1.3 | November 20146

1.4 non orthogonal elements (trapezoidal / parallelogram)

Elementsofnonorthogonalshapesarefacadeelementswithoneortwoangledtransversesides-longitudinaljoints(male/female)areparallel.

Fig. 1.14: Non orthogonal elements (trapezoidal / parallelogram)

Fig. 1.13: Horizontal installation

R(min. 200 mm)

R (min. 200 mm)

M

M

45-1

35

R max

R (min. 200 mm)

M

M

45-1

35

M

45-135

R (min. 200 mm)

Fig. 1.15: Non orthogonal elements-two angled transverse sides

NOTE:all applications for use must be approved by Trimo's technical support.

QO Special solutions | EN | Version 1.3 | November 2014 7

AB

2.0 cOrners 2.1 transversal corner element

2.1.1 Classical - combining two elements

Possibilities:

CombiningtwodifferentcoloursElementthicknessS[mm]:80-240ModulewidthM[mm]:600-1200Minimalleglength[mm]:Amin=Bmin=s+150mm(*QbissOneB/FA+B=min.530mm)Maximalleglength[mm]: a+B (max) = 2000 mm Amax=1000mm; Bmax=1000mm Amax=900mm; Bmax=1100mm Amax=800mm; Bmax=1200mm Amax=700mm; Bmax=1300mm a+B (max) = 4100 mm Amax=600mm; Bmax=3500mm

Fig. 2.1: L corner shape Fig. 2.2: Combination of two different colours

A

B

S

min. 150 mm

70 -175

M

QO Special solutions | EN | Version 1.3 | November 20148

2.1.2 Under an angle - combining two elements

Fig. 2.3: L corner shape - angled transverse sides

Possibilities:

UnderanangleCombiningtwodifferentcolours

A max.

A (min. 150+S)

M

M

45-135

A (min 150+S)

S

A

A

B

B

M M

Fig. 2.4: L corner shape - angled transverse sides

NOTE:all applications for use must be approved by Trimo's technical support.

QO Special solutions | EN | Version 1.3 | November 2014 9

2.2.1 Classical - combining two elements (shape and colour combination)

2.2 longitudinal corner element - combined

Possibilities:

CombiningtwodifferentcoloursElementthicknessS[mm]:80,100,120,133,150ModulewidthM[mm]:600-1200Minimalleglength[mm]: -Amin=150(200) -Bmin=200(150) -A+B=min.600mmMaximalleglength: -Amax=Bmax=800mm&A+B=max.1600mm -ElementlengthR[mm]:530-6500Anglebetweenlegs70-175

Fig. 2.5: L corner shape

A B

R

B

A

S

min

. 150

mm

Fig. 2.6: Combination of two different colours

70 -175

QO Special solutions | EN | Version 1.3 | November 201410

R R

A

AB

B

2.2.2 Under an angle - combining two elements

Possibilities:

UnderanangleCombiningtwodifferentcolours

Fig. 2.7: L corner shape Fig. 2.8: Corner under an angle

min

. 150

mm

A (A

)

B (B)

S

70 - 175

NOTE:all applications for use must be approved by Trimo's technical support.

QO Special solutions | EN | Version 1.3 | November 2014 11

2.3 3d corner

3DcornerwasdevelopedsuchthatoneQbissOnecornerelementislaidhorizontallyandfoldedbelow45angleinthetransversaldirection.Thisallowsthefaadetopasssmoothlyintoasoffitinonepiece.

Fig. 2.9: 3D corner under an angle

A

R1 R2

B

B

90

70 -175

A

A

S

R1

R2

Front view Isometric view - outer view

Top view Isometric view - inner view

NOTE:all applications for use must be approved by Trimo's technical support.

QO Special solutions | EN | Version 1.3 | November 201412

Qbiss One facade system enables integration with different Windows, doors and Curtain Walls systems that are available on the market.

For more information please contact Trimos technical support, tech.info@trimo.si.

NOTE:- supporting sub-structure for the location of openings must be defi ned by static calculation.

Qbissmodularfaadesystemoffersarangeofelegantandhigh-qualitysolutionsforwindows,doorsandotheropenings.Framesaremadeofaluminiumprofileswithanintegratedthermaltransferbarrierthatassuresthermalstabilityoftheindoorenvironment.Theyenableaquickassemblyofopeningsandefficientreplicationoffaadedetails.Themodularassemblysystemallowseofthefollowingtypesofframesandwindows.

WINdOW aNd dOOr OPENINGsTypes(feasibleassemblycombinations:A,B,C):TYPE 1 equal to faade element dimension Type1.1-visiblejoint Type1.2-visiblejointbyshiftTYPE 2 not in element dimension Type2.1-withcoverededges,windowssmallerthanelement Type2.2-withcoverededges,windowslargerthanelementCombinationsofwindowandglazings A-Aluminiumframe(blindframe) B-Aluminiumframe+fixedglazing C-Aluminiumframe+glazingwithopeningfunction

3.0 WIndOWs/dOOrs/cUrtaIn Walls

!

Fig. 3.1: TYPE 1 - in element dimension Fig. 3.2: TYPE 2 - not in element dimension

Type 2.1 Type 2.2Type 1.2Type 1.1

3.1 Windows, doors and curtain walls integration

Trimo, d. d., Prijateljeva cesta 12, 8210 Trebnje, Sloveniat: +386 (0)7 34 60 137 f: +386 (0)7 34 60 127 e: qbiss@qbiss.eu w: www.qbiss.eu, www.trimo.eu

Pub

lishe

d by

: Tri

mo,

d. d

., EN

/ 1

1/2

014