Upload
dinhthien
View
217
Download
0
Embed Size (px)
Citation preview
Fanatec® is a registered trademark of Endor AG Designed and developed by Endor AG in Germany
TUNING OPTIONS
To enter Tuning Menu, press Tuning button. To navigate inside the menu, use the right FunkySwitch. Press it up or down to access 5 setups. Press the FunkySwitch right or left to go through the options and turn the FunkySwitch to change option values.
QuickGuide
www.fanatec.com
Tuning Button
FunkySwitch
Tuning Button
CENTER CALIBRATION
If a center calibration is needed (e. g. after �rmware updateof ClubSport Wheel Base) when using the steering wheelyou need to enter the tuning button as shown on the graphic.When tuning menu is active then press the analogue Stickand the FunkySwitch at the same time to calibrate the wheelcenter.
SHIFTER CALIBRATION
To enter shifter calibration mode, simultaneously press theTuning Menu Button and the button highlighted below.
PS3 MODE
PC / PS4 MODE
PS 22
* Game Speci�c Button
9 Touch Pad Button
Joy Joy+ 26 + GSB 2*
8 L2
6 L1
12 L3
7 R2
Options 10
R1 5D-Pad + 25
4
211 R3
1
3
ATTACHING THE RIM ON TAKING THE RIM OFF
To enter PlayStation 3 Mode, simulatneously press and hold the two buttons, highlighted below, for one second.
PlayStation 4 needs no special mode. The wheel has to be/stay in PC mode. Tuning Button
- Remove storage pin. - Compress and hold the Quick Release mechanism.
- Slide it on the ClubSport Wheel Base axle.
- Insert the storage pin.
- Release the Quick Release mechanism. - Release the Quick Release mechanism.
- Compress and hold the Quick Release mechanism.
- Place the rim face down on table.
- Align ClubSport Wheel Base axle, to correct position.
- Slide it o� the ClubSport Wheel Base axle.
Select Start
L2
L1R1
L3
L4 D-Pad +
R2
R3