QH Circuitbreakers DataSheet

8/10/2019 QH Circuitbreakers DataSheet

1/20

QH 10kA Miniature CircuitBreaker & RCBO Range

Innovative, Robust, Reliable & Efficient Protection.

NEW


2/20


3/20

01 - 0418mm Range QH Miniature Circuit Breakers

01Features, Accessories, Technical Characteristics

02Time Delay Characteristics, Connection Diagrams, Dimensions

03Ambient Temperature Chart, Load Capacity,

04Effect of Power Frequency, Let-Through Energy Data

05 - 0727mm Range QH Miniature Circuit Breakers


06Time Delay Characteristics, Connection Diagrams, Dimensions

07Load Capacity, Let-Through Energy Data

08 - 09Electronic Combined RCD/MCB Devices


09Technical Characteristics, Tripping Characteristics, Connection Diagrams, Dimensions

10QH Isolating Switches

10Features

11QH 10kA Retrofit Kits for ADVD & HPRD Distribution Boards

11Upgrade & installation

12Advantage ADVDH Distribution Switchboards

12Features, Dimensions & Part Numbers

12HPRDH Distribution Switchboards

12Features, Dimensions & Part Numbers

13QH 10kA Retrofit Kits & Accessories

13Description, Detail & Part Numbers

14Selection Data

14DIN Miniature Circuit Breakers, Isolating Switches, Miniature RCBOs, Miniature RCDs

CONTENTS

QH 10kA Miniature Circuit Breaker & RCBO Range


4/20

01FREE CALL1800 770 870 www.cbi-electric.com.au

Electrical Mechanical

Compliance: AS/NZS 60898.1 Frame size: 45mm(Approval No NSW25003)

Rated voltage: 230/400V AC Device size: 80mm (height), 17.5mm (width)

48V DC (per pole) Mounting: DIN rail (EN 50022)

Rated frequency: 50/60Hz Degree of protection: IP20 (when installed)

Breaking capacity (Ics=Icu): 10kA Terminals: Open mouthed lift terminals

Time delay characteristic: Curves: 1, 2 Terminal protection: Touch safe, VBG 4, VE-EN 6

Back up fuse: Max. 125A gL Terminal capacity: 1 25mm

Selectivity class: 3 Fastening torque: 2 2.4Nm Endurance: > 8000 operating cycles Busbar thickness: 0.8 2mm

Line voltage connection: Optional (above/below) Mounting position: Any

Technical Characteristics

QH 10kA Range

QH Miniature Circuit Breakers & RCBOsThe new QH Range of MCBs & RCBOs provide safe and reliable solutions for low voltage electricalprotection against overload and short circuit, delivering reliability, strength and efficient protectionfor commercial, industrial and mining applications.

DIN mounting18mm Module widthHigh selectivity between MCB and back-up fuse due to low let-through energyCompatible with standard busbarTwin-purpose terminal (lift/open-mouthed) above & belowBusbar positioning optionally above or belowMeets the requirements of insulation co-ordination, distance between contacts

4 mm, for secure isolation.

Suitable for DC applications up to 48V DC1 pole to 3 pole

18mm Range QH Miniature Circuit Breakers

Features

Auxiliary switch (add on, field mountable)Trip alarm ( add on, field mountable)Shunt trip release (add on, field mountable)Undervoltage release (add on, field mountable)

EnclosuresAdditional terminal 35mmAnti-tamper device (handle lock)

Accessories


5/20

FREE CALL1800 770 870 www.cbi-electric.com.au 02

1-pole 1+N-pole 2-pole 3-pole 3+N-pole

Connection Diagrams

Time Delay Characteristics

CURVE 1Operating

Characteristics

Ambient Temperature 30C

TRIPPINGTIME

S

ECONDS

MINUTES

PERCENTAGE RATED CURRENT

CURVE 2Operating

Characteristics


TRIPPINGTIME

S

ECONDS

MINUTES


1-pole 2p & 1pole+N 3-pole 3 pole + N

Dimensions (mm)


6/20

Effect of the Ambient Temperature on Thermal Tripping BehaviourAdjusted rated current values according to the ambient temperature

Ambient Temperature T [C]

In{A} -25 -20 -10 0 10 20 30 35 40 45 50 55 60

0.16 0.20 0.19 0.19 0.18 0.17 0.17 0.16 0.16 0.15 0.15 0.15 0.14 0.14

0.25 0.31 0.30 0.29 0.28 0.27 0.26 0.25 0.25 0.24 0.24 0.23 0.23 0.22

0.5 0.61 0.60 0.58 0.56 0.54 0.52 0.50 0.49 0.48 0.47 0.46 0.45 0.44

0.75 0.92 0.90 0.87 0.84 0.81 0.78 0.75 0.74 0.73 0.71 0.69 0.68 0.66

1 1.2 1.2 1.2 1.1 1.1 1.0 1.0 0.99 0.97 0.95 0.93 0.90 0.89

1.5 1.8 1.8 1.7 1.7 1.6 1.6 1.5 1.5 1.5 1.4 1.4 1.4 1.3

1.6 2.0 1.9 1.9 1.8 1.7 1.7 1.6 1.6 1.5 1.5 1.5 1.4 1.4

2 2.4 2.4 2.3 2.2 2.2 2.1 2.0 2.0 1.9 1.9 1.9 1.8 1.8

2.5 3.1 3.0 2.9 2.8 2.7 2.6 2.5 2.5 2.4 2.4 2.3 2.3 2.2

3 3.7 3.6 3.5 3.4 3.3 3.1 3.0 3.0 2.9 2.8 2.8 2.7 2.7 3.5 4.3 4.2 4.1 3.9 3.8 3.7 3.5 3.4 3.4 3.3 3.2 3.2 3.1

4 4.9 4.8 4.7 4.5 4.3 4.2 4.0 3.9 3.9 3.8 3.7 3.6 3.5

5 6.1 6.0 5.8 5.6 5.4 5.2 5.0 4.9 4.8 4.7 4.6 4.5 4.4

6 7.3 7.2 7.0 6.7 6.5 6.3 6.0 5.9 5.8 5.7 5.6 5.4 5.3

8 9.8 9.6 9.3 9.0 8.7 8.4 8.0 7.9 7.7 7.6 7.4 7.2 7.1

10 12 12 12 11 11 10 10 9.9 9.7 9.5 9.3 9.0 8.9

12 15 14 14 13 13 13 12 12 12 11 11 11 11

13 16 16 15 15 14 14 13 13 13 12 12 12 12

15 18 18 17 17 16 16 15 15 15 14 14 14 13

16 20 19 19 18 17 17 16 16 15 15 15 14 14

20 24 24 23 22 22 21 20 20 19 19 19 18 18

25 31 30 29 28 27 26 25 25 24 24 23 23 22 32 39 38 37 36 35 33 32 32 31 30 30 29 28

40 49 48 47 45 43 42 40 39 39 38 37 36 35

50 61 60 58 56 54 52 50 49 48 47 46 45 44

63 77 76 73 71 68 66 63 62 61 60 58 57 56

Load Capacity of Series Connected Miniature Circuit Breakers

NUMBER OF DEVICES (n) 1-pole

LOAD

CAPACITYFACTOR

KN



7/20

Effect of Power FrequencyAdjusted power frequency on the tripping behaviour I

MAof the quick release

Power Frequency f (Hz)

16 2/3 50 60 100 200 300 400

IMA(f) / IMA (50Hz) [%] 91 100 101 106 115 134 141

Let-Through Energy Data

PROSPECTIVE SHORT CIRCUIT [A]

Let-Through Energy, Characteristic 1, 1-pole

LET-THROUGH

ENERG

YI2t[A2s

ec]

PROSPECTIVE SHORT CIRCUIT [A]

Let-Through Energy, Characteristic 2, 1-pole

LET-THROUGH

ENERG

YI2t[A2s

ec]



8/20

Electrical Mechanical

Compliance: I EC/EN 60947-2 Frame size: 45mm

Rated voltage: 230/400V AC Device size: 90mm (height), 27mm (width)

60V DC (per pole) Mounting: DIN rail (EN 50022)

Rated frequency: 50/60Hz Degree of protection: IP20 (when installed)

Breaking capacity (Icu=Ics): 10kA Terminals: Open mouthed lift terminals

Time delay characteristic: Curves: 1, 2 Terminal protection: Touch safe, VBG 4, VE-EN 6

Back up fuse: Max. 200A gL Terminal capacity: 2.5 50mm

Selectivity class: 3 Mounting position: Any

Endurance: 20000 operating cycles

Rated insulation voltage: 440V

Peak withstand voltage: 4kV


QH 10kA Range

QH Miniature Circuit Breakers & RCBOsThe new QH Range of MCBs & RCBOs provide safe and reliable solutions for low voltage elec-trical protection against overload and short circuit, delivering reliability, strength and efficientprotection for commercial, industrial and mining applications.

27mm Range QH Miniature Circuit Breakers

DIN mounting27mm Module widthIndependent switching contacts80 to 125A ratingsWith isolator function, meets the requirements of insulation coordination,

distance between contacts 4mm, for secure isolation.

High current limit

Features

Auxiliary switch (add on, field mountable)Trip alarm ( add on, field mountable)Shunt trip release (add on, field mountable)

Anti-tamper device (handle lock)Busbar

Accessories



9/20

1-pole 1+N-pole 2-pole 3-pole 3+N-pole

Connection Diagrams

Time Delay Characteristics

CURVE 1Operating

Characteristics


TRIPPINGTIME

SECONDS

MINUTES


CURVE 2Operating

Characteristics


TRIPPINGTIME

SECONDS

MINUTES


1-pole 2p & 1pole+N 3-pole 3 pole + N

Dimensions (mm)



10/20

Let-through Energy Data

LET-THROUGH

ENERGYI2t[A2s

ec]

LET-THROUGH

ENERGYI2t[A2s

ec]

PROSPECTIVE SHORT CIRCUIT [A] PROSPECTIVE SHORT CIRCUIT [A]

Load Capacity of Series Connected Miniature Circuit Breakers

NUMBER OF DEVICES (n) 1-pole AMBIENT TEMPERATURET [C]

LOAD

CAPACITYK

T

[I/In]

Load Capacity in case of Block Installation Effect of Ambient Temperature

Permitted permanent load at ambient temperature T[C] with n devices IDL

= InK

T(T)K

N(N).

Determined according to AS/NZS 60898

Maximum Let-Through Energy, Characteristic 1, 1-pole Maximum Let-Through Energy, Characteristic 2, 1-pole

LOAD

CAPACITYFACTORK

N



11/20

Electrical

Compliance: AS/NZS 60898 (Approval No NSW 25355)

No of Poles: 1+N-Pole switched, N Led through (solid neutral)

Rated voltage: 240 VAC

Rated frequency: 50/60Hz

Rated current: 6-32A (Curve 2), 6-20A (Curve 1)

Rated tripping current: 10, 30mA

Endurance electrical comp: >_ 4,000 operating cycles Endurance mechanical comp: >_ 20,000 operating cycles

Ultimate short circuit breaking capacity: Curve 1, Curve 2 Ultimate short circuit breaking capacity: 10kA

Rated short circuit breaking capacity: 10kA Rated fault breaking capacity: 10kA

QH 10kA RCBO Range

The new QH Range of RCBOs provide safe and reliable solutions for low voltage electrical protectionagainst overload and short circuit, delivering reliability, strength and efficient protection forcommercial, industrial and mining applications. Being one of the smallest 10kA RCBOs on themarket, it allows for extra wiring room in most applications.

Electronic Combined RCD/MCB Devices


DIN mounting1+N-pole, 1 module width, allows for extra wiring room in boardsElectronic residual current device /

miniature circuit breaker combination in only 1MU

Tripping line voltage dependentContact position indicator red greenCan be sealed with leads in the on and off positionRated currents available 632A (Curve 2), 620A (Curve 1)Permanently connected neutral conductor (1100mm long)

Can be connected to standard busbar (at the lower side)Type A RCD

Features

Auxiliary switch for subsequent installationTripping signal switch for subsequent installation

Shunt trip releaseTripping module

Accessories



12/20

Mechanical

Frame size: 45mm

Device size: 102.6mm (height), 17.5mm (width) (1MU)

Mounting: Quick fastening with 2 lock-in positions on DIN rail IEC/EN 60715

Upper terminals: Lift terminals

Lower terminals: Open mouthed/lift terminals

Terminal protection: Finger and hand touch safe, BGV A3, OVE-EN 6

Terminal capacity: 1 25mm

Busbar thickness below: 0.8 2mm

Degree of protection built in: IP20 (when installed)

Permanent ambient temperature range: -25C to + 40C

Resistance to climatic conditions: 25 55C / 90 95% relative humidity acc. to IEC 60068-2

Neutral conductor length: 1100mm


Tripping line voltage-dependent: Instantaneous

Peak withstand current: 250A (80/20ps)

Rated non-tripping current: 0.5

Voltage range for protective function: 184 264V~

Tripping Characteristics RCD Component

Conventional non-tripping current: 1.05

Conventional tripping current: 1.30

Reference temperature: 30C

Selectivity class: 3

Maximum back-up fuse > 6kA: 100 A gl

Tripping Characteristics RCD Component

Connection Diagrams Dimensions (mm)

1+N-pole 1+N-pole

11.5

91

17.7



13/20

QH 10kA Range

QH Isolating SwitchesIntroducing the new QH Range of isolating switches. These switches are a quality solution forthe safe isolation on light and power distribution applications. Switch isolators are used as amain switch in low voltage switchgear for distribution of light and power, starting and stoppingmotors and isolating loads during any maintenance.

Complies to IEC 60947-2Min service entrance from busbarsControl: On load circuit opening and closingSwitching and isolating motorsDirect busbar mount

Features



14/20

QH 10kA Retrofit Kits for ADVD & HPRD Distribution BoardsExisting Heinelec ADVD & HPR distribution boards can be easily upgraded to fit our QH 10kA range of MCBs & RCBOs.

Remove existingQF escutcheon

Install new QH main switch

and chassis kits. (Main switchNOT required for HPR boards)

1

3

Remove existing QFchassis and main switch.(Remove main switch ONLY

on AVDV model)

2

4

Final upgraded Distribution Board allowsfor immediate use for all QH 10kA product.

Install new QH escutcheon



15/20

Main No of Height Width Depth Part

Switch Poles (mm) (mm) (mm) Number

250A 24 800 580 225 ADVDH24M250 36 1000 580 225 ADVDH36M250

48 1000 580 225 ADVDH48M250

60 1200 580 225 ADVDH60M250

72 1400 580 225 ADVDH72M250

84 1600 580 225 ADVDH84M250

96 1800 580 225 ADVDH96M250

Advantage ADVDH Distribution Switchboards

HPRDH Distribution Switchboards

Spacious design affords more useable space(depth below escutcheon 150mm)

Additional switchboard modules can be added to the top,bottom and sides for a modular solution

Complies with AS/NZS 3439.3IP42 degree of protectionEnclosure depth: 225mm

(including door)

Quality 250A, 20kA, 0.25 type tested busbar system

Top and bottom removable gland plates

Features

Main No of Height Width Depth Part

Switch Poles (mm) (mm) (mm) Number

250A 24 800 580 225 HPRDH24M250 36 1000 580 225 HPRDH36M250

48 1000 580 225 HPRDH48M250

60 1200 580 225 HPRDH60M250 72 1400 580 225 HPRDH72M250

84 1600 580 225 HPRDH84M250

96 1800 580 225 HPRDH96M250

Complies with AS/NZS 3439.3IP66 degree of protectionQuality 250A, 20kA, 0.25 type tested busbar systemSpacious design affords more useable space

(depth below escutcheon 140mm)

Enclosure depth: 225mm (including door)Additional switchboard modules can be added to the top,bottom and sides for a modular solution

Removable top and bottom gland plates

Features



16/20

QH 10kA Retrofit Kits & Accessories

Description Pole Rating PartCapacity Number

24 250A HQHC24

36 250A HQHC36

48 250A HQHC48

60 250A HQHC60

72 250A HQHC72

84 250A HQHC84

96 250A HQHC96

250A ThreePhase BusbarAssemblies

Type HQHCNote: All

switchgear

not included

Description Pole Part

Capacity Number

24 453273G024

36 453273G036

48 - 60 453273G060

72 - 84 453273G084

96 453273G096

ADVDHEscutcheon

Description Pole Part

Capacity Number

24 - 36 453032G036

48 - 60 453032G060

72 453032G072 84 453032G084

96 453032G096

HPRDHEscutcheon

Description Part

Number

MSHS250ADVDH250A Main SwitchKit for ADVDH,

Description Part

Number HS250

250A Amp MainSwitch 3 Pole

Description Length Part

Number

450mm HDINR450

DIN Rail C/WMounting brackets



17/20

Selection Data

DIN Miniature Circuit Breakers: 18mm Curve 2

Rating (Amp) Rating(kA) Module Width 1 Pole 2 Pole 3 Pole

4 10kA 18mm QHB18204 QHB28204 QHB38204

6 10kA 18mm QHB18206 QHB28206 QHB38206

10 10kA 18mm QHB18210 QHB28210 QHB38210

16 10kA 18mm QHB18216 QHB28216 QHB38216

20 10kA 18mm QHB18220 QHB28220 QHB38220

25 10kA 18mm QHB18225 QHB28225 QHB38225

32 10kA 18mm QHB18232 QHB28232 QHB38232

40 10kA 18mm QHB18240 QHB28240 QHB38240

50 10kA 18mm QHB18250 QHB28250 QHB38250

63 10kA 18mm QHB18263 N/A QHB38263

DIN Miniature Circuit Breakers: 27mm Curve 2

Rating (Amp) Rating(kA) Module Width 1 Pole 3 Pole

80 10kA 27mm QHD18280 QHD38280

100 10kA 27mm QHD182100 QHD382100

125 10kA 27mm QHD182125 QHD382125

DIN Isolating Switches: Type QH

Rating (Amp) Rating 1 Pole 2 Pole 3 Pole

63 415V AC QHB10063 QHB20063 QHB30063

100 415V AC QHB100100 N/A N/A

125 415V AC QHB100125 QHB200125 QHB300125

DIN Miniature RCBO

Rating (Amp) Rating(kA) Module Width 1 Pole

6 10kA 18mm QH12AD06

10 10kA 18mm QH12AD10

16 10kA 18mm QH12AD16

20 10kA 18mm QH12AD20

32 10kA 18mm QH12AD32

DIN Miniature RCD

Rating (Amp) Rating(kA) Module Width 1 Pole 2 Pole

40 10kA 18mm QH16C-D-40A QH36C-D-40A

63 10kA 18mm QH16C-D-63A QH36C-D-63A



18/20

15

Notes

FREE CALL1800 770 870 www.cbi-electric.com.au


19/20


20/20

FREE CALL 1800 770 870 WEBSITE www cbi electric com au

ADDRESS 90 Fairbank Road, Clayton South, Victoria 3169 | PO Box 241, Springvale, Vic 3171

PHONE +61 3 9590 3500 | FAX +61 3 9551 1051 | EMAIL [email protected]

MELBOURNE HEAD OFFICE

Australia

SALES OFFICES

SOUTHERN REGIONVICTORIA & SOUTH AUSTRALIA

90 Fairbank Rd, Clayton South, VIC 3169PO Box 241, Springvale, VIC 3171

PHONE +61 3 9590 3555FAX +61 3 9551 1053FREE CALL 1800 770 870EMAIL [email protected]

NEW SOUTH WALES

310/33 Lexington Drive,Bella Vista, NSW, 2153


QUEENSLAND

Unit 2, 80 Ebbern St, Darra, QLD, 4076PO Box 3240, Darra, QLD, 4076


WESTERN AUSTRALIA

40 Belmont Avenue,Rivervale, WA, 6103


DISTRIBUTORS

TASMANIASLEGERS PRODUCTS

WP Martin Pty Ltd85 Elizabeth St, Launceston, TAS, 7250

PHONE +61 3 6331 5545FAX +61 3 6331 4256EMAIL [email protected]

TASMANIAHEINELEC & CBI PRODUCTS

Electrical Agencies90 Central Avenue, Moonah, TAS, 7009


NORTHERN TERRITORY

Jewell Distributors Pty LtdCnr, Hidden Valley & Beaton Roads,Berrimah, NT 0828


Documents

QH Circuitbreakers DataSheet