Upload
dark-
View
221
Download
0
Embed Size (px)
Citation preview
8/10/2019 QIG_DI-604
1/12
Before You Begin1. If you purchased this router to share your high-speed Internet connection with
other computers, you must have either an Ethernet-based Cable or a DSL modemwith an established Internet account from an Internet Service Provider (ISP).
2. Its best to use the same computer that is connected to your modem forconfiguring the DI-604 router. The DI-604 Router acts as a DHCP server and willassign all the necessary IP address information on your network. See Appendixat the end of this Quick Installation Guide or the Manual on the CD-ROM forsetting each network adapter to automatically obtain an IP address.
Check Your Package ContentsThese are the items included with your DI-604 purchase:
If any of the above items are missing, please contact your reseller.
2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respectiveholders. Software and specifications subject to change without notice. DI-604.03072003
This product can be set up using any currentweb browser, i.e., Internet Explorer 5x,Netscape Navigator 4x.
DI-604Express EtherNetwork
Broadband Router
DI-604 Ethernet Broadband Router
CD-ROM (containing Manual and Warranty)
Ethernet (CAT5 UTP/Straight-Through) Cable
5V DC, 2A Power Adapter
Using a powersupply with a
different voltage ratingwill damage and voidthe warranty for thisproduct.
8/10/2019 QIG_DI-604
2/12
Connecting The DI-604 Broadband RouterTo Your Network
A. First, connect the power adapter to the receptorat the back panel of theDI-604 and then plug the other end of the power adapter to a wall outlet orpower strip. The Power LED will turn ONto indicate proper operation.
B. 1. Power off your Cable or DSL modem; some devices may not have a on/offswitch and will require you to unplug the power adapter. Now, the DI-604
should be powered on and the Cable / DSL modem should be turned off.
2. Cable / DSL modem (Power Off) DI-604 (Power On)Connect an Ethernet cable to the Ethernet jack located on the Cable / DSLmodem. After the Ethernet cable is securely connected, power on the Cable /DSL modem by turning on the unit or plugging in the power adapter.
3. Cable / DSL modem (Power On) DI-604 (Power On)Insert the other end of the Ethernet cable to the WAN PORT on the backpanel of the DI-604. The WAN LED light will illuminate to indicate properconnection. If the WAN LED is not illuminated, please go back and step B andrepeat its instructions.
C. Insert an Ethernet cable to LAN port 1on the back panel of the DI-604 and anavailable Ethernet port on the network adapter in the computer you will use toconfigure the DI-604. The LED light for LAN Port 1 will illuminate to indicateproper connection. (Note: The LAN Ports on the DI-604 are Auto-MDI/MDIX.Meaning you can use a straight-through or crossover-Ethernet cable to theLAN Ports.)
B.WAN PortThis is the connection for the
Ethernet Cable to Ethernet Port onthe Cable or DSL Modem.
C.LAN PortsThese are the connections for Ethernet
cables to your Ethernet-enabled computers
Reset ButtonPressing this buttonrestores the router
to its original factorydefault settings.
A.Receptor forPower Adapter
8/10/2019 QIG_DI-604
3/12
Connecting Additional Computers To TheDI-604 Broadband RouterUsing additional Ethernet (CAT5 UTP/Straight-Through) cables, connectyour Ethernet-equipped computer(s) to one of the 3 remaining EthernetLAN ports on the back panel of the DI-604.
When you have completed the steps in this Quick Installation Guide,yourconnected network should look similar to this:
Cable or DSLModem
DI-604Ethernet
Broadband Router
Computers connected
to the LAN Ports
LAN Port LEDs.Each of theLAN ports on the back of the
DI-604 have a correspondingLED light on the front panelof the unit. When a properconnection has been madeto a computer that is ON, theLED on the front panelshould illuminate.
8/10/2019 QIG_DI-604
4/12
Using The Setup Wizard
The logon pop-upscreen will appear.
Once you havelogged in, theHomescreenwill appear.
Open your Webbrowserand typehttp://192.168.0.1intothe URL address box.Then press the Enter orReturnkey.
Typeadminfor theusername and leave thepassword field blank.
ClickOK
ClickRun Wizard
8/10/2019 QIG_DI-604
5/12
You will see the following screens.
Step 1- Set up your newpassword.You have the option toestablish a password.
Step 2-Choose your time zone.
ClickNext
ClickNext
ClickNext
8/10/2019 QIG_DI-604
6/12
The Setup Wizard (continued)Select the type of Internet connection for your router.
If you selected Dynamic IPAddress, this screen willappear:
Selectone ofthese settings
If you are unsure of which setting toselect, please contact your InternetService Provider.
Click the Clone MACAddress button toautomatically copy the MACaddress of the network adapterin your computer. You can also
manually type in the MACaddress. What is a MAC address?Each
network adapter has a discreteMedia Access Control (MAC)address. Note that some computersand peripherals may already includebuilt-in network adapters.
ClickNext
ClickNext
8/10/2019 QIG_DI-604
7/12
If your ISP requires a Static IPAddress, and this option isselected, then this screen willappear:
If your ISP uses PPPoE(Point-to-Point Protocol over Ethernet) andthis option is selected, then thisscreen will appear:
Enter in the username
and password providedto you by your ISP.
Do not use
the numbers
displayed in these
fields. They are only
shown as an example.
ClickNext
Enter the IP addressinformation originallyprovided to you by your ISP.You will need to complete allthe required fields.
ClickNext
Please be suret to remove anyexisting PPPoEclient softwareinstalled on yourcomputers.
8/10/2019 QIG_DI-604
8/12
Your Setup is Complete!
You will be returned to the Hometab.
ClickRestart
ClickClose
8/10/2019 QIG_DI-604
9/12
Test Your Internet Connection
Relaunchyour Webbrowser (i.e., Internet
Exploreror NetscapeNavigator), to link toyour favorite Web siteto test your Internetconnection.
For additional settingsor information, refer tothe Advanced, Tools,orStatus tabson theweb-managementinterface; or to the
manual located on theCD-ROM.
ClickExit
8/10/2019 QIG_DI-604
10/12
APPENDIXTo connect to the network, make surethe network adapter in your computeris configured properly. Heres how toconfigure the network adapter to obtainan IP address automatically for theDI-604 Broadband Router.
For Microsoft Windows XP:Go to Start> right clickon
My Network Places>select Properties> Double-clickonthe Network Connection associatedwith the Ethernet adapter (i.e.,D-Link DFE-530TX+).
ClickInternet Protocol (TCP/IP)
ClickProperties
Select Obtain an IP addressautomatically
Click OK
Restartyourcomputer
8/10/2019 QIG_DI-604
11/12
For Apple Macintosh OS X:
Go to the Apple Menuand Select SystemPreferences.
The IP address information,the Subnet Mask, the RoutersIP address and the Ethernetadapter address will appear.
Click onNetwork
SelectBuilt-inEthernetin the Showpull-down menu
SelectUsing DHCPin the Configure pull-down menu
Click onApply Now
8/10/2019 QIG_DI-604
12/12
Technical SupportYou can find software updates and user documentation on the D-Linkwebsite.D-Link provides free technical support for customers within the UnitedStates and within Canada for the duration of the warranty period on thisproduct.
U.S. and Canadian customers can contact D-Link technical supportthrough our website, or by phone.
Tech Support for customers within the United States:D-Link Technical Support over the Telephone:
(877) 453-546524 hours a day, seven days a week.
D-Link Technical Support over the Internet:http://support.dlink.comemail:[email protected]
Tech Support for customers within Canada:D-Link Technical Support over the Telephone:(800) 361-5265Monday to Friday 8:30am to 9:00pm EST
D-Link Technical Support over the Internet:http://support.dlink.ca
email:[email protected]