Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
QR Testing & Technical Center
Quality Report Co. Ltd. established Testing & Technical Center for further improvement of confidence and satisfaction from our customers.
Quality Report Testing & Technical Center will support your Testing, Analysis, and Inspection!! You can request us to test or you can test using our instrument at QR Testing & Technical Center.
We can do here For Customer • Vibration Test • Environment Test • Metallurgical Analysis • Macro and Micro Observation • Dimension check
บริษัท คิวอาร์ เทสติง้ แอนด์ เทคนิเคิล เซ็นเตอร์ จํากดั
QR TESTING & TECHNICAL CENTER CO.,LTD. 300/111 หมูท่ี่ 1 ตําบลตาสทิธ์ิ อําเภอปลวกแดง จงัหวดัระยอง 21140
300/111 Moo 1, Tambol Tasit, Amphur Pluakdaeng, Rayong 21140 Tel : (038) 950-286-8 Fax : (038) 950-289 E-mail: [email protected] Quality Report website: www.qualityreport.co.th
Automotive Specification Tests Standard Test (ISO, JIS, ASTM, etc.) Production Inspection Failure Analysis, etc.
Idea of Supporting Test Solutions for Failure Analysis We can support to find out a root cause of failure.
Analysis Method
Chemical Composition Analysis: Spectrometer & XRF Quantitative Analysis & Qualitative analysis at Testing Center and your site. High technology CCD based OES, can detect “C” down to 0.001 % or 10 ppm. Can convert or compare with similar GRADE in various standard such as DIN, AISI, JIS, ISO. Also can do for RoHS compliance screening with XRF.
<Find out abnormality> Check with drawing or specification Comparison with good parts
Hardness (HRC)Dimension
Salt Spray
Repl
icat
ion
Test
CompositionAnalysis
Macro & MicroObservation
Prepared SamplePolishingMoldingCutting
MicrostructureHardness (HV)
ChamberVibration Durability
Spec
ifica
tion
Test
Sample
Investigation
Sample Preparation
Foundry-Master Xpert PMI-Master Smart Xmet-8000
Macro & Micro Observation: Microscope Image & Analysis. Surface analysis, Microstructure, Roughness by laser, Particle Distribution, Porosity, Grain size, Cast iron and etc.
Hardness: Rockwell & Micro Vickers. We can evaluate HRC, HRA and HV convert to HB (Brinell Hardness) and HK (Knoop Hardness). EX: Inspection heat treatment by hardness distribution.
Dimension Check: Measuring microscope & Portable CMM We can measure dimension of Semiconductor parts, Electronic parts, Rubber parts, Automotive body & parts, Bolts, Screw, and etc.
2D surface image 3D surface image
3D contour image Grain size analysis
Microstructure
Welding measurement
Count and measure
Porosity
Cast iron analysis
Roughness
SZX7 BX51 GX51 DSX500 OLS4100 LEXT
Rockwell Micro Vickers
Measuring Microscope STM7 Romer Sigma 2025
Vibration Test: Sweep Test, Random Test, Shock Test, etc. We can do Transport simulation, Resonance analysis, Durability test, (Fatigue, wear), Strength check under vibration condition.
Environment Test: Low & High temp, Humidity, Pattern, Salt spray etc. We can evaluate performance of electronics parts and automotive parts, coating (preventative rust), deterioration and/or deformation of plastic, resin, rubber parts, etc. under environment condition.
Chambers Salt Spray
Other Instruments: We can test furthermore Spring Tester Coating Thickness Hydraulic Durability
ItemsBrand RJC ACSModel CB331P DM600CTemperature range -40 ºC to 80 ºC -70 ºC to 180 ºCHumidity range 20% to 95% R.H 10% to 98% R.HInternal dimension W3470mm x H2200mm x D2570mm W850mmxD730mmxH892mm
Contents
3Axis: G-6225 2Axis: G-9210
Items ContentsCapacity 200 L & 450LTesting Temperature NSS ACSS 35℃±1℃/Class 50℃±1℃PH Value NSS ACSS: 6.5-7.2/Class: 3.0-3.2Standard ASTM-B117, JIS-D0201, JIS-H8502,
JIS-H8610,JIS-Z2371, GB/T 10125
ItemsForce Output 24.5 kN, Vector sine
14.7 kN, RMS Random11.7 kN, Vector sine
Max. Acceleration 3.5G [no load]2.08G [500kg load]
Max. Displacement 51mmp-pFrequency Range 2-200 HzMax. Payload 500 kgTable Dimension W:1500mm x D:1500mm
Contents
ItemsForce Output 9.8 kN, Vector Sine
5.8 kN, RMS Random11.7 kN, Vector Sine
Max. Acceleration 33G [Bare Table]6.25G [no load on V Table]6.60G [no load on H Table]
Max. Displacement 50mmp-pFrequency Range 2 -2000 Hz (Bare Table)
2 -200 Hz (With V Table)2 -500 Hz (With H Table)
Max. Payload 300 kgTable dimension W 1200mm x D 1200mm
Contents
ASP-10S Items Contents
Capacity 100N (10kgf)Load Resolution 1mN (0.1gf)Length Resolution 10μmTest Speed 1-600 mm/minTest Stroke 210Anvi Diameter φ60
ItemsModel DCF-900 DCN-901Range 0-999μm 0-999μmProbe Monopolar,
Magnetic InductionEddy-current
Resoultion 0.1μm 0.1μmAccurcy 0-250μm: ±1μm 0-70μm: ±1μm
ContentsItems Contents
Model FT-30Capacity ±30kN Stroke ±25mm/±50mmFrequency 0.01-1000HzWave shape Sine, Tnagular, Square and etc.
Quality Report Co., Ltd. 390 Soi Yothin Pttana, Praditmanootham Rd, Kwangklongchan, Khet Bangkapi, Bangkok 10240 Tel : (02) 946-9988 (Auto 20 Line) Fax : (02) 946-6688 E-mail: [email protected] Website: www.qualityreport.co.th