OPTIFLUX 2000/4000/5000 Electromagnetic Flow Sensor

Flanged versions for volumetric flow rate measurement

of electrically conductive liquids

General Items supplied

For in-depth information please consult the handbook, data sheet, special manuals and certificates supplied on CD-ROM.

Installation, assembly, commissioning and servicing must only be undertaken by trained personnel. Maintenance which is considered relevant to safety in the sense of explosion protection must only be carried out by the manufacturer, his agents or under the supervision of experts.

Visual check

Example

For use in hazardous areas, special codes and regulations are applicable, which are supplied in a separate document that describes all hazardous area relevant information.

Responsibility as to suitability and intended use of this device rests solely with the user. The supplier does not accept any liability resulting from misuse by the customer. Improper installation and operation may lead to loss of warranty. In addition, the "General conditions of sale", found on the back of the invoice and forming the basis of the purchasing contract, are applicable.

If you need to return the device to the manufacturer or supplier, please complete the form given on the CD-ROM and attach it to the device. KROHNE regrets that it cannot repair or check your device unless accompanied by this completed form.

only separate version

JS

KROHNE 09/2006 7.30946.33.00

Liner materials Electrode materials PFA PFA HC4 Hastelloy C4 PTFE PTFE HB2 Hastelloy B2 PU Polyurethane Pt Platinum CER Ceramic 316 Stainless steel ETFE ETFE Ta Tantalum PP Polypropylene Ti Titanium HR Hardrubber HC4/LN LowNoise HC4 316Ti / LowNoise, stainless steel LN 1.4571

Quick Start

Quick Start OPTIFLUX 2000/4000/5000 2

OPTIFLUX 2000/4000/5000

Handling and installation instructions

min. 5 DN min. 2 DN

L max. L min. 0.5 mm L max.

L min.

3 Quick Start OPTIFLUX 2000/4000/5000

OPTIFLUX 2000/4000/5000

Handling and installation instructions

C F

min. max. with min. max. min. max. with min. max.IFC 300 -40C 140C IFC 300 -40F 284FIFC 010 -25C 120C IFC 010 -13F 248FIFC 300 -40C 120C IFC 300 -40F 248FIFC 010 -25C 120C IFC 010 -13F 248FIFC 300 IFC 300IFC 010 IFC 010IFC 300 IFC 300IFC 010 IFC 010IFC 300 -40C 120C IFC 300 -40F 248FIFC 010 -25C 120C IFC 010 -13F 248FIFC 300 IFC 300IFC 010 IFC 010

C min. max. F min. max.IFC 300 -40C 65C IFC 300 -40F 149FIFC 010 -25C 60C IFC 010 -13F 140F

Ambient temperatures

ETFE -40F 248F

Polyurethane

Polypropylene 23F 194F

149F

23F

Liner Liner

-5C

Separate

Hardrubber 23F 176F

Compact

PTFE / PFA -40F 356F

90C

Separate Compact

-40C 180C

120C

80C

65C

120C

-40C

Polyurethane

Ceramics

Polypropylene

Process temperatures

PTFE / PFA

ETFE

Hardrubber

-5C

-60C

-5C 194F

23F 149F

Ceramics -76F 248F

23F 176F

23F

Ambient temperatures

-5C 80C

-5C 65C

-5C 90C

Note: The min. / max. temperatures for the compact devices are dependent on the liner / converter combination. See data sheet on CD-ROM.

Avoid strong vibrations

Process temperature

Ambient temperature

Quick Start OPTIFLUX 2000/4000/5000 4

OPTIFLUX 2000/4000/5000

Special considerations

min. 5 DN min. 2 DN

10 DN

5 m

5 Quick Start OPTIFLUX 2000/4000/5000

OPTIFLUX 2000/4000/5000

Grounding Metal pipelines, not internally coated. Grounding without grounding rings.

Metal pipelines, with internal coating, and internally non-conductive pipelines. Grounding with grounding rings.

Grounding rings

Quick Start OPTIFLUX 2000/4000/5000 6

OPTIFLUX 2000/4000/5000

Torques and pressure OPTIFLUX 2000/4000: all liners

PFA, PTFE, ETFE

Polyurethane, hardrubber

PFA,PTFE, ETFE

Polyurethane, hardrubber

2,5 PN 40 4 M 12 32 - 1/10 150 4 1/2" 32 -4 PN 40 4 M 12 32 - 1/6 150 4 1/2" 32 -6 PN 40 4 M 12 32 - 1/4 150 4 1/2" 32 -

10 PN 40 4 M 12 7,6 4,6 3/8 150 4 1/2" 3,5 3,615 PN 40 4 M 12 9,3 5,7 1/2 150 4 1/2" 3,5 3,620 PN 40 4 M 12 16 9,6 3/4 150 4 1/2" 4,8 4,825 PN 40 4 M 12 22 11 1 150 4 1/2" 6,7 4,432 PN 40 4 M 16 37 1940 PN 40 4 M 16 43 25 1 1/2 150 4 1/2" 13 1250 PN 40 4 M 16 55 31 2 150 4 5/8" 24 2365 PN 16 4 M 16 51 4265 PN 40 8 M 16 38 2180 PN 10 8 M 16 47 25 3 150 4 5/8" 43 39

100 PN 16 8 M 16 39 30 4 150 8 5/8" 34 31125 PN 16 8 M 16 53 40150 PN 16 8 M 20 68 47 6 150 8 3/4" 61 51200 PN 10 8 M 20 84 68 8 150 8 3/4" 86 69200 PN 16 12 M 20 68 45250 PN 10 12 M 20 78 65 10 150 12 7/8" 97 79250 PN 16 12 M 24 116 78300 PN 10 12 M 20 88 76 12 150 12 7/8" 119 104300 PN 16 12 M 24 144 105350 PN 10 16 M 20 97 75 14 150 12 1" 133 93400 PN 10 16 M 24 139 104 16 150 16 1" 130 91450 PN 10 20 M 24 127 93 18 150 16 1 1/8" 199 143500 PN 10 20 M 24 149 107 20 150 20 1 1/8" 182 127600 PN 10 20 M 27 205 138 24 150 20 1 1/4" 265 180700 PN 10 20 M 27 238 163 28 150 28 1 1/4" 242 161800 PN 10 24 M 30 328 219 32 150 28 1 1/2" 380 259900 PN 10 28 M 30 - 205 36 150 32 1 1/2" - 269

1000 PN 10 28 M 35 - 261 40 150 36 1 1/2" - 269

Note:DN 2,5 / 4 / 6 / 10 have a DN 15 flange.ANSI 1/10", 1/6", 1/4", 3/8" have a 1/2" flange.

max. torqueNm

Nominal size inch

Flange class lb

BoltsNominal size DN mm

Pressure rating

Bolts max. torque Nm

Limits/Vacuum load For general limits see instrument type plate! Vacuum load only for PTFE and ETFE (Tefzel) lined flowmeters; see manual on CD-ROM for detailed information.

7 Quick Start OPTIFLUX 2000/4000/5000

OPTIFLUX 2000/4000/5000

OPTIFLUX 5000: DN15100

15 PN 40 4 M 12 73,5 1/2 150 4 1/2" 54,225 PN 40 4 M 12 73,5 1 150 4 1/2" 54,240 PN 40 4 M 16 178 1 1/2 150 4 1/2" 131,350 PN 40 4 M 16 178 2 150 4 5/8" 131,380 PN 40 4 M 16 178 3 150 4 5/8" 131,3

100 PN 16 4 M 16 178 4 150 4 5/8" 131,3

Nominal size

Pressure rating

Bolts max. torque Nm

max. torqueftlb

Nominal size inch

Flange class

lb

Bolts

Please use Stainless steel A2 / 6.9 class bolts Tighten the bolts in fixed order: 1+2 (in), 3+4 (out), 5+6 (in), 7+8 (out). See picture.

Max. torque: Step 1: by hand Step 2: approx. 25% of max. torque Step 3: approx. 50% of max. torque Step 4: approx. 80% of max. torque Step 5: 100% of max. torque given in tables above.

Gaskets: With the instrument, 4 PTFE gaskets are delivered (2 to be used with installation, 2 as spare or to be used when grounding rings are used). No other gaskets are required.

OPTIFLUX 5000: DN150250

150 PN 16 8 M 20 148 1/2 150 8 3/4" 109200 PN 10 8 M 20 183 1 150 8 3/4" 135250 PN 10 12 M 20 158 1 1/2 150 12 7/8" 117

max. torqueftlb

Nominal size inch

Flange class

lb

BoltsNominal size

Pressure rating

Bolts max. torque Nm

For ASME pipe flanges the max. allowable operating pressure is dependent on the process temperature, see Technical Data on CD-ROM. Material of joints: viton

Max. torque: Step 1: approx. 50% of max. torque Step 2: approx. 80% of max. torque Step 3: 100% of max. torque given in tables above.

Quick Start OPTIFLUX 2000/4000/5000 8

OPTIFLUX 2000/4000/5000