QuantumX by HBM: Ready to measure

Thema, Kopfzeile rechts

Data acquisition system - universal and decentralized

Efficient, modular system concept

S233

3-6.

1 en

H

BM: p

ublic

Rubrik, Kopfzeile rechts

In mobile field testsThe trimaran Hydroptre is one of the fastest sailing boats in the world and achieves a

maximum speed of over 54 knots (100 km/h).

The whole Hydroptre team is consistently pushing the limits of technical feasibility. Materials and components need to deliver peak performance. We rely on HBM measu-

rement technology on board Hydroptre to ensure our future success. Only HBM is

able to provide the reliability and precision required for our tests.

Damien Colegrave, Engineer, LHydroptre

The multifunctional tool for your test and measurement tasksHBMs QuantumX high-performance data acquisition system is the perfect tool for many test and measurement tasks. Be it mobile or stationary load analysis, measurements on a test specimen in the laboratory or test bench, or mobile road and field tests - QuantumX adapts to your requirements.

Mobile data acquisition and field test Typical applications

Mobile or stationary load data acquisition Road test for chassis optimization (ride and handling), brake or acceptance tests

QuantumX benefits in mobile use

Modular system concept Universal inputs with maximum interference suppression for the acquisition of strain, force, displacement, acceleration, rotational speed, pressure, temperature, voltage and current

Synchronous signal acquisition of analog and digital inputs and bus signals

Connection to PC or standalone data recorder

Small and rugged (5 g vibration, 35 g shock), extended temperature range (-20 65C, 5 95 % rel. humidity)

Optimally matched catman software Synchronous storage of measurement signals, CANbus, telemetry, wheel force sensors (Kistler, A&D, MTS), position (GPS, Glonass) and video

Online computation of signals (algebra, strain gauges, counting, electric, etc.)

Smart triggers

High-performance screen visualization and operation

Multiple data formats: BIN, RPC III, nCode, MAT, DAT, ASCII

Reproducible automatic test sequences (sequencer, script)

Offline parameterization

2

Rubrik, Kopfzeile rechtsApplications and benefits

Measurement and analysis of test specimens in the laboratory or test benchTypical applications

Static and dynamic load and analysis and fatigue life investigation Function and performance test of components, assemblies, power train components or complete vehicles in the test bench

QuantumX benefits in stationary use

Integrable system concept Universal inputs with 24 bit resolution and sample rates of up to 100 kS/s

Real-time capability (algebra, matrix, PID control, limit values, torsional vibration analysis, signal generator)

Easy integration and outputs (10 V, EtherCAT, CAN, digital inputs and outputs)

Open software concept High data throughput up to 5 MS/s using catman

Driver package for programmers: LabVIEW, .NET, Linux

Innovative test bench conceptsAn innovative universal test bench by adt-Rinck (note: Internationale

Hydraulik-Akademie) for the first time also enables the complex inter-

action between electro-hydraulic components to be tested.

We have been using HBM measurement technology in our

national and international test benches for over 10 years and

have always had the best experiences with it. We have been

convinced by the products technical features, reliability and quality.

HBM just offers the right package.

Torsten Sigmund, Project Manager, adt-Rinck

3


*Transducer Electronic Datasheet: The measurement modules identify transducers as soon as they are connected and automatically configure the channel.

A reliable measuring chain Dependable results require optimal matching of transducers, data acquisition system and software. HBM provides you with the complete measuring chain: connect visualize and save analyze.

Universal and fastQuantumX provides universal inputs and supports TEDS*, the standardized electronic data sheet in the sensor for automatic channel configuration.

Rugged and preciseAcquire strain, force, torque, pressure or displacement using precise sensors and transducers from HBM.

Integrate sensors or systems from other manufacturers.

Measuring modulesSensors and transducers

4

Rubrik, Kopfzeile rechtsA comprehensive solution - the complete measuring chain from HBM

Intuitive and fastStore data locally in the data recorder or PC. Operation is identical.

catman allows easy computation, visualization, storage and analysis of measured values and signals.

QuantumX also can be integrated into your own programs

LabVIEW .NET

Decentralized and integrableInstall your QuantumX modules at the measuring points and connect the modules in a decentrali-zed and synchronized network.

Integrate the measurement signals in real time and analyze them in parallel using PC software.

SoftwareMeasuring modules

5


Professional and project-oriented: Data handling using catman

visualize - save - analyze

6

Rubrik, Kopfzeile rechtsMaximum usability, minimum effort

Professional and project-oriented: Data handling using catman

A single tool allows full parameterization of all channels, visualization and control of test and measurement tasks through to fundamental data analysis: catman. Work in a project-oriented way and describe your measuring equipment and task. The traceability of data is guaranteed, you always have an overview.

catman Professional software for data acquisition and processing

Easy integration of measuring devices Fast and reusable channel configuration (sensor data base, TEDS, CAN, dbc)

Easy adding of computed channels using formula editor Plug-ins for signal analysis of rotating mechanical shafts, combustion engines, electric propulsion systems and mechanical stress and fatigue life analyses

Smart triggers based on signal analysis Individual visualization and control on multiple pages, screens or full-screen (chart recorder, digital display, table, analog meter, function key, text, video, image, test track, etc.)

Signal visualization in the time, frequency or angular range Event monitoring and activities (limit value switches, email, logbook, etc.) Wide range of storage and export formats (catman BIN, Microsoft Excel, ASCII, MDF 3/4, National Instruments DIAdem, MathWorks MATLAB, RPC III, UFF58, )

Powerful data analysis (statistics, cutting, matching, etc.) Automation of sequences using predefined functions, VBA script or AutoSequence

Reporting (direct or using Microsoft Word, Excel)

7

Ethernet/FireWire

WLAN/LAN

Ethernet/FireWire


Flexible concept, consistent quality Small or large numbers of channels? Connected to a PC or standalone with data recorder? Integrated real time? Stationary or mobile application? Centralized or distributed? QuantumX offers a solution in every case.

Every measuring task has different system requirements. What remains constant is that high measurement quality is essential.

The modules can be combined in an individual system that meets your requirements. This enables solutions for a wide range of applications to be implemented. Flexible, without any compromise. Versatile and dependable.

Operator level Configuration Visualization and control Automation Recording Analysis Presentation

Single device

Data recorder Configuration Visualization Recording Analysis

System level Sync via FireWire or Ethernet

8

Ethernet/FireWire

WLAN/LAN

Ethernet/FireWire

Rubrik, Kopfzeile rechtsThe right configuration for your measuring task

The benefits at a glance Acquires all common mechanical, electrical and thermal quantities

Freely scalable up to 10,000 channels Decentralized and synchronized Universal inputs with automatic channel para-meterization (TEDS)

High accuracy (24 bit AD, electrical isolation, AutoCal, 6/5/4-wire circuit, carrier frequency)

Up to 100 kS/s per channel, individual filters and scaling Real-time capability Standalone with data recorder Up to 5 million measured values per second using catman Calibration data saved to every measurement module

Interfaces to GPS, Glonass, IMUs Video cameras Wheel force sensors (Kistler, A&D, MTS)

Synchronous Ethernet PTPv2, FireWire, NTP, IRIG-B

Real time Real-time modules, analog outputs, EtherCAT

Scalable 1 to 10,000 channels

1 10,000

9

Rubrik, Kopfzeile rechtsDie Module im berblick

MX840B / MX440B MX410B MX460B

8-channel/4-channel universal amplifier 4-channel highly dynamic universal amplifier 4-channel highly dynamic universal amplifier

Sampling rate per channel: 40 kS/s Signal bandwidth: 7.2 kHz

Sampling rate per channel: 100 kS/s (200 kS/s, 2-chan.) Signal bandwidth: 40 kHz (80 kHz, 2-channel)

Sampling rate per channel: 100 kS/s Signal bandwidth: 40 kHz

Transducer technologies

SG half or full bridge (DC or TF with 4.8 kHz)

Current-fed piezoelectric transducers (IEPE / ICP)

Piezoresistive full bridge

Resistance thermometers (PT100, PT1000)

Thermocouples (Type K, N, R, S, T, B, E, J, C)

Ohmic resistor

Potentiometric transducers

Inductive half or full bridge, LVDT

Voltage (100 mV, 10 and 60 V)

Standardized current (20 mA)

Channel 5-8, in addition: Frequency, counter, rotary encoder (incremental with/without index), SSI

MX840B Channel 1, in addition: High speed CAN (ISO 11898, read 128 signals, transmit 7 channels)

Sensor supply: 5...24 V, 0.7 W (module: 2 W)


Strain gauge half or full bridge (DC, TF with 4.8 kHz)


Piezoresistive full bridge

Inductive half or full bridge

Voltage (10 V)


Real time: RMS, PEAK

Scalable voltage output: BNC socket, 10 V, 16 bit



Digital high-resolution frequency inputs (HBM torque flange, pulse counter)

Encoder/incremental encoder (digital, with/without index)

Pulse counter

Passive inductive rotational speed sensors (AC coupled)

Pulse-width modulated signals (PWM)

Real time: Rotational vibration analysis, RMS, PEAK


Connector DSubHD 15 pole

AccessoriesThermocouples: 1-THERMO-MXBOARDSG quarter bridge: 1-SCM-SG120/35010 or 300 V CAT II: 1-SCM-HVBNC adapter: 1-SUBHD15-BNC

Connector DSubHD 15 pole BNC (voltage output)

AccessoriesSG quarter bridge: 1-SCM-SG120/35010 or 300 V CAT II: 1-SCM-HVBNC adapter: 1-SUBHD15-BNC

Connector DSubHD 15 pole

QuantumX: The facts QuantumX is the freely scalable measuring system from HBM. Get a quick overview of the modules flexibility.

10

Rubrik, Kopfzeile rechtsDie Module im berblick

MX403B MX1615B MX1601B

4-channel voltage module VDE tested safety

16-channel bridge amplifier 16-channel standard amplifier





Voltage: 10, 100 and 1000 V

Differential, electrically isolated inputs

Isolation: 1000 V CAT II / 600 V CAT III

Real time: RMS, PEAK


SG full bridge

SG half bridge

SG quarter bridge with integrated 120 and 350 ohm completion resistors

Bridge excitation: DC or CF (1200 Hz)

Internal shunt resistor 100 kOhm)

Voltage (10 V)

Resistance thermometers (PT100)

Ohmic resistor

Potentiometric transducer (poti)



Voltage (100 mV, 10 and 60 V)


Connector 4 mm safety lab socket

AccessoriesVirtual star: 1-G068-2BNC to laboratory connector: 1-G067-2Safety laboratory cable: 1-KAB282-1,5

Connector Phoenix Push-In (8 pole)

Accessories10 connectors: 1-CON-S1015


Accessories10 connectors: 1-CON-S1015

Rubrik, Kopfzeile rechtsThe modules at a glance

11

Rubrik, Kopfzeile rechtsDie Module im berblick Rubrik, Kopfzeile rechts

MX1609KB / MX1609TB CX22-W CX27B

16-channel thermocouple amplifier Type K/T

Data recorder with catman EtherCAT / Ethernet Gateway

Sampling rate per channel: 300 S/s Signal bandwidth: 15 Hz


Thermocouple

Type K: MX1609KB

Type T: MX1609TB

Interfaces

Ethernet 2 x Ethernet TCP/IP (LAN and WLAN)

2 x FireWire

USB

3 x USB (keyboard, mouse, touch, GPS, etc.)

1 x DVI

3 x digital input

3 x digital output with status LED

1 x RS232 (GPS)

Interfaces

2 x EtherCAT

Ethernet 2 x Ethernet TCP/IP

2 x FireWire

2 x digital input

2 x digital output with status LED

1 x Sync Out (MGCplus)

Function: Connection of QuantumX amplifiers and modules

Standalone measurement or test mode after configuration

Configuration of measurement channels using sensor data base or TEDS

Online computation of channels

Trigger for Start and Stop

Data storage on exchangeable CF-CARD

Function: Connection of QuantumX amplifiers in real time

Connector Thermo mini (green/brown)

Accessories10 type K plugs: 1-THERMO-MINI10 type T plugs: 1-THERMO-MINI-T

Special features 8 GB CF-CARD and antenna included

Special features Distributed Clock

Variable Sync-Manager

1211

The modules at a glance

MX471B MX878B MX879B

4-channel CAN module 8-channel analog output 8-channel analog output 32-channel digital-I/O, multi-I/O module

Signal acquisition per channel: 128 Transmit measurement signals: 200

Output signals: max. 4.8 kS/s Generate signals: max. 96 kS/s

Output sgnals: max. 4.8 kS/sGenerate signals: max. 96 kS/s

Interfaces

CAN 2.0 A/B (ISO 11898, transmit / receive)

CCP, receive XCP-on-CAN

Software selectable internal bus termination

MX Assistant can generate DBC file

Functions and outputs

8 scalable voltage outputs ( 10 V, 16 Bit)

Real time: PID control, add, multiply, matrix calculation

Output of system signals

Functions and outputs

8 scalable voltage outputs ( 10 V, 16 bit)

Real time: limit value switch, PID control, add, multiply, matrix calculation

Output of system signals (direct analog or on bus)

32 x digital input or output (TTL, 24 V)

Connector 9-pin D-Sub (male)

Connector BNC


Accessories 10 connectors: 1-CON-S1015

13

Thema, Kopfzeile rechts

S233

3-7.

0 en

H

BM: p

ublic

www.hbm

.com

HBM Test and MeasurementTel. +49 6151 803-0 Fax +49 6151 803-9100 [email protected]

13

Documents

QuantumX by HBM: Ready to measure