Microsoft.Certkey.70-412.v2013-10-22.by.AWAIS · QUESTION 7 Your network contains an Active Directory domain named contoso.com. The domain contains three servers named Server1, Server2,

Microsoft.Certkey.70-412.v2013-10-22.by.AWAIS.249q

Number: 70-412Passing Score: 800Time Limit: 120 minFile Version: 16.5

http://www.gratisexam.com/

Exam Code: 70-412

Exam Name: Configuring Advanced Windows Server 2012 Services

Exam A

QUESTION 1Your network contains an Active Directory domain named adatum.com. The domain contains two domaincontrollers that run Windows Server 2012. The domain controllers are configured as shown in the followingtable.

You log on to DC1 by using a user account that is a member of the Domain Admins group, and then you createa new user account named User1. You need to prepopulate the password for User1 on DC2. What should youdo first?

A. Connect to DC2 from Active Directory Users and Computers.B. Add DC2 to the Allowed RODC Password Replication Policy group.C. Add the User1 account to the Allowed RODC Password Replication Policy group.D. Run Active Directory Users and Computers as a member of the Enterprise Admins group.

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:http://technet.microsoft.com/en-us/library/cc730883(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc753470(v=ws.10).aspx#BKMK_pre

QUESTION 2Your company has offices in Montreal, New York, and Amsterdam. The network contains an Active Directoryforest named contoso.com. An Active Directory site exists for each office. All of the sites connect to each otherby using the DEFAULTIPSITELINK site link. You need to ensure that only between 20:00 and 08:00, thedomain controllers in the Montreal office replicate the Active Directory changes to the domain controllers in theAmsterdam office. The solution must ensure that the domain controllers in the Montreal and the New Yorkoffices can replicate the Active Directory changes any time of day. What should you do?

A. Create a new site link that contains Montreal and Amsterdam.Remove Amsterdam from DEFAULTIPSITELINK.Modify the schedule of DEFAULTIPSITELINK.

B. Create a new site link that contains Montreal and Amsterdam.Create a new site link bridge.Modify the schedule of DEFAU LTIPSITELINK.

C. Create a new site link that contains Montreal and Amsterdam.Remove Amsterdam from DEFAULTIPSITELINK.Modify the schedule of the new site link.

D. Create a new site link that contains Montreal and Amsterdam.Create a new site link bridge.Modify the schedule of the new site link.


Explanation/Reference:Explanation:Very Smartly reworded with same 3 offices. In the exam correct answer is "Create a new site link that containsNewyork to Montreal. Remove Montreal from DEFAULTIPSITELINK.Modify the schedule of the new site link".http://technet.microsoft.com/en-us/library/cc755994(v=ws.10).aspx

QUESTION 3Your network contains two Active Directory forests named contoso.com and adatum.com. A two- way foresttrust exists between the forests. The contoso.com forest contains an enterprise certification authority (CA)named Server1. You implement cross-forest certificate enrollment between the contoso.com forest and theadatum.com forest. On Server1, you create a new certificate template named Template1. You need to ensurethat users in the adatum.com forest can request certificates that are based on Template1. Which tool shouldyou use?

A. DumpADO.ps1B. RepadminC. Add-CATemplateD. CertutilE. PKISync.ps1

Correct Answer: ESection: (none)Explanation

Explanation/Reference:Explanation:B. Repadmin.exe helps administrators diagnose Active Directory replication problems between domaincontrollers running Microsoft Windows operating systems.C. Adds a certificate template to the CA.D. use Certutil.exe to dump and display certification authority (CA) configuration information, configureCertificate Services, backup and restore CA components, and verify certificates, key pairs, and certificatechains.E. PKISync.ps1 copies objects in the source forest to the target forest http://technet.microsoft.com/en-us/library/ff955845(v=ws.10).aspx#BKMK_Consolidating http://technet.microsoft.com/en-us/library/cc770963(v=ws.10).aspx http://technet.microsoft.com/en-us/library/hh848372.aspxhttp://technet.microsoft.com/library/cc732443.aspxhttp://technet.microsoft.com/en-us/library/ff961506(v=ws.10).aspx

QUESTION 4You have a server named Server1 that runs Windows Server 2012. Server1 has the Windows DeploymentServices server role installed. You back up Server1 each day by using Windows Server Backup. The disk arrayon Server1 fails. You replace the disk array. You need to restore Server1 as quickly as possible. What shouldyou do?

A. Start Server1 from the Windows Server 2012 installation media.B. Start Server1and press F8.C. Start Server1 and press Shift+F8.D. Start Server1 by using the PXE.

Correct Answer: ASection: (none)Explanation

Explanation/Reference:A. Recovery of the OS uses the Windows Setup Dischttp://technet.microsoft.com/en-us/library/cc753920.aspxhttp://www.windowsnetworking.com/articles_tutorials/Restoring-Windows-Server-BareMetal.html

QUESTION 5Your network contains two servers named Server1 and Server2 that run Windows Server 2012. Both servershave the Hyper-V server role installed. Server1 and Server2 are located in different offices. The offices connectto each other by using a high-latency WAN link. Server2 hosts a virtual machine named VM1. You need toensure that you can start VM1 on Server1 if Server2 fails. The solution must minimize hardware costs. Whatshould you do?

A. On Server1, install the Multipath I/O (MPIO) feature. Modify the storage location of the VHDs for VM1.B. From the Hyper-V Settings of Server2, modify the Replication Configuration settings. Enable replication for

VM1.C. On Server2, install the Multipath I/O (MPIO) feature. Modify the storage location of the VHDs for VM1.D. From the Hyper-V Settings of Server1, modify the Replication Configuration settings. Enable replication for

VM1.

Correct Answer: DSection: (none)Explanation

Explanation/Reference:Explanation:

You first have to enable replication on the Replica server--Server1--by going to the server and modifying the"Replication Configuration" settings under Hyper-V settings. You then go to VM1-- which presides on Server2--and run the "Enable Replication" wizard on VM1.

"First Test, First Pass" - www.lead2pass.com 7Microsoft 70-412 Exam

QUESTION 6You have a server named Server1 that runs Windows Server 2012. You modify the properties of a systemdriver and you restart Server1. You discover that Server1 continuously restarts without starting Windows Server2012. You need to start Windows Server 2012 on Server1 in the least amount of time. The solution mustminimize the amount of data loss. Which Advanced Boot Option should you select?

A. Last Know Good Configuration (advanced)B. Repair Your ComputerC. Disable automatic restart on system failureD. Disable Driver Signature Enforcement


Explanation/Reference:Explanation:http://windows.microsoft.com/en-ph/windows-vista/using-last-known-good-configuration

QUESTION 7Your network contains an Active Directory domain named contoso.com. The domain contains three serversnamed Server1, Server2, and Server3 that run Windows Server 2012. All three servers have the Hyper-Vserver role installed and the Failover Clustering feature installed. Server1 and Server2 are nodes in a failovercluster named Cluster1. Several highly available virtual machines run on Cluster1. Cluster1 has the Hyper-VReplica Broker role installed. The Hyper-V Replica Broker currently runs on Server1. Server3 currently has novirtual machines. You need to configure Cluster1 to be a replica server for Server3 and Server3 to be a replicaserver for Cluster1. Which two tools should you use? (Each correct answer presents part of the solution.Choose two.)

A. The Hyper-V Manager console connected to Server3B. The Failover Cluster Manager console connected to Server3C. The Hyper-V Manager console connected to Server1.D. The Failover Cluster Manager console connected to Cluster1E. The Hyper-V Manager console connected to Server2

Correct Answer: ADSection: (none)Explanation

Explanation/Reference:Explanation:http://technet.microsoft.com/en-us/library/jj134240.aspx

QUESTION 8You have a file server named Server1 that runs Windows Server 2012. The folders on Server1 are configuredas shown in the following table.

A new corporate policy states that backups must use Microsoft Online Backup whenever possible. You need toidentify which technology you must use to back up Server1. The solution must use Microsoft Online Backupwhenever What should you identify? To answer, drag the appropriate backup type to the correct location orlocations. Each backup type may be used once, more than once, or not at all. You may need to drag the splitbar between panes or scroll to view content.

A.B.C.D.

Correct Answer: Section: (none)Explanation

Explanation/Reference:

Explanation:http://technet.microsoft.com/en-us/library/hh831761.aspx

QUESTION 9You have a DNS server named Server1 that runs Windows Server 2012. Server1 has a signed zone forcontoso.com. You need to configure DNS clients to perform DNSSEC validation for the contoso.com DNSdomain. What should you configure?


A. The Network Connection settingsB. A Name Resolution PolicyC. The Network Location settingsD. The DNS Client settings

Correct Answer: BSection: (none)Explanation

Explanation/Reference:Explanation:B. In a DNSSEC deployment, validation of DNS queries by client computers is enabled through configuration ofIPSEC & NRPThttp://technet.microsoft.com/en-us/library/ee649182(v=ws.10).aspx http://technet.microsoft.com/en-us/library/ee649136(v=ws.10).aspx

QUESTION 10Your network contains an Active Directory domain named contoso.com. The domain contains a domaincontroller named DC1 that runs Windows Server 2012. On Dc1, you open DNS Manager as shown in theexhibit. (Click the Exhibit button.)

You need to change the replication scope of the contoso.com zone. What should you do before you change thereplication scope?

A. Modify the Zone Transfers settings.B. Add DC1 to the Name Servers list.C. Add your user account to the Security settings of the zone.D. Unsign the zone.


Explanation/Reference:Explanation:D. Lock icon signifies that the Zone has been signed. Changes to the zone are blocked when signed http://www.microsoft.com/en-us/download/dlx/ThankYou.aspx?id=29018


QUESTION 11Your network contains an Active Directory domain named contoso.com. The domain contains a domaincontroller named DC1 and a member server named Server1. Server1 has the IP Address Management (IPAM)Server feature installed. On Dc1, you configure Windows Firewall to allow all of the necessary inbound ports forIPAM. On Server1, you open Server Manager as shown in the exhibit. (Click the Exhibit button.)

You need to ensure that you can use IPAM on Server1 to manage DNS on DC1. What should you do?

A. Modify the outbound firewall rules on Server1.B. Modify the inbound firewall rules on Server1.C. Add Server1 to the Remote Management Users group.D. Add Server1 to the Event Log Readers group.



Explanation:Since no exhibit, the guess here is it's not using the GPO to manage the Event Log Readers group-- evidencedby the fact that the firewall was configured manually instead of with the GPO. If the GPO was being used thenthe IPAM server would be in the Event Log Readers group due to


restricted group settings in the GPO as shown below:

In the above example, the IPAM server is as member of the VDI\IPAMUG group.

http://technet.microsoft.com/en-us/library/jj878313.aspx

QUESTION 12Your network contains an Active Directory domain named contoso.com. The domain contains servers namedServer1 and Server2 that run Windows Server 2012. Server1 has the IP Address Management (IPAM) Serverfeature installed. You install the IPAM client on Server2. You open Server Manager on Server2 as shown in theexhibit. (Click the Exhibit button.)

You need to manage IPAM from Server2. What should you do first?

A. On Server1, add the Server2 computer account to the IPAM MSM Administrators group.B. On Server2, open Computer Management and connect to Server1.C. On Server2, add Server1 to Server Manager.D. On Server1, add the Server2 computer account to the IPAM ASM Administrators group.


Explanation/Reference:Explanation:http://technet.microsoft.com/en-us/library/hh831453.aspx

QUESTION 13Your network contains an Active Directory domain named contoso.com. The domain contains a domaincontroller named Dc1. DC1 has the DNS Server server role installed. The network has two sites named Site1and Site2. Site1 uses 10.10.0.0/16 IP addresses and Site2 uses 10.11.0.0/16 IP addresses. All computers useDC1 as their DNS server. The domain contains four servers named Server1, Server2, Server3, and Server4. Allof the servers run a service named Service1. DNS host records are configured as shown in the exhibit. (Clickthe Exhibit button.)

You discover that computers from the 10.10.1.0/24 network always resolve Service1 to the [P address ofServer1. You need to configure DNS on DC1 to distribute computers in Site1 between Server1 and Server2when the computers attempt to resolve Service1. What should run on DC1?

A. dnscmd /config /bindsecondaries 1B. dnscmd /config /localnetpriority 0C. dnscmd /config /localnetprioritynetmask 0x0000ffffD. dnscmd /config /roundrobin 0


Explanation/Reference:Explanation:A. Specifies use of fast transfer format used by legacy Berkeley Internet Name Domain (BIND) servers. 1enablesB. Disables netmask ordering.C. You can use the Dnscmd /Config /LocalNetPriorityNetMask 0x0000FFFF command to use class B ( or 16bit) for netmask ordering for DNS round robinD. Disables round robin rotation.http://technet.microsoft.com/en-us/library/cc737355(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc738473(v=ws.10).aspx


http://support.microsoft.com/kb/842197http://technet.microsoft.com/en-us/library/cc779169(v=ws.10).aspx

QUESTION 14Your network contains an Active Directory domain named contoso.com. The domain contains a main office anda branch office. An Active Directory site exists for each office. The domain contains two servers named Server1and Server2 that run Windows Server 2012. Both servers have the DHCP Server server role installed. Server1is located in the main office site. Server2 is located in the branch office site. Server1 provides IPv4 addressesto the client computers in the main office site. Server2 provides IPv4 addresses to the client computers in thebranch office site. You need to ensure that if either Server1 or Server2 are offline, the client computers can stillobtain IPv4 addresses.The solution must meet the following requirements:

- The storage location of the DHCP databases must not be a single point of failure.- Server1 must provide IPv4 addresses to the client computers in the branch office site only if Server2 is offline.- Server2 must provide IPv4 addresses to the client computers in the main office site only if Server1 is offline.

Which configuration should you use?

A. load sharing mode failover partnersB. a failover clusterC. hot standby mode failover partnersD. a Network Load Balancing (NLB) cluster


Explanation/Reference:Explanation:A. The load sharing mode of operation is best suited to deployments where both servers in a failoverrelationship are located at the same physical site.B. Hot standby mode of operation is best suited to deployments where a central office or data center serveracts as a standby backup server to a server at a remote site, which is local to the DHCP clientsC. Needs to be a DHCP Failover optionD. Needs to be a DHCP Failover optionhttp://technet.microsoft.com/en-us/library/hh831385.aspxhttp://blogs.technet.com/b/teamdhcp/archive/2012/09/03/dhcp-failover-hot-standbymode.aspx

QUESTION 15You have a DHCP server named Server1. Server1 has an IP address 192.168.1.2 is located on a

subnet that has a network ID of 192.168.1.0/24. On Server1, you create the scopes shown in the followingtable.

You need to ensure that Server1 can assign IP addresses from both scopes to the DHCP clients on the localsubnet. What should you create on Server1?

A. A scopeB. A superscopeC. A split-scopeD. A multicast scope


Explanation/Reference:Explanation:A. A scope is an administrative grouping of IP addresses for computers on a subnet that use the Dynamic HostConfiguration Protocol (DHCP) service. The administrator first creates a scope for each physical subnet andthen uses the scope to define the parameters used by clients. B. A superscope is an administrative feature ofDynamic Host Configuration Protocol (DHCP) servers running Windows Server 2008 that you can create andmanage by using the DHCP Microsoft Management Console (MMC) snap-in. By using a superscope, you cangroup multiple scopes as a single administrative entity.D. Multicasting is the sending of network traffic to a group of endpointsdestination hosts. Only those membersin the group of endpoints hosts that are listening for the multicast traffic (the multicast group) process themulticast traffic http://technet.microsoft.com/en-us/library/dd759168.aspx http://technet.microsoft.com/en-us/library/dd759152.aspx

QUESTION 16Your network contains servers that run Windows Server 2012. The network contains a large number of iSCSIstorage locations and iSCSI clients. You need to deploy a central repository that can discover and list iSCSIresources on the network automatically. Which feature should you deploy?

A. the Windows Standards-Based Storage Management featureB. the iSCSI Target Server role serviceC. the iSCSI Target Storage Provider featureD. the iSNS Server service feature


Explanation/Reference:Explanation:A. Windows Server 2012 enables storage management that is comprehensive and fully scriptable, andadministrators can manage it remotely. A WMI-based interface provides a single mechanism through which tomanage all storage, including non-Microsoft intelligent storage subsystems and virtualized local storage (knownas Storage Spaces). Additionally, management applications can use a single Windows API to manage differentstorage types by using standards-based protocols such as Storage Management Initiative Specification (SMI-S). B. Targets are created in order to manage the connections between an iSCSI device and the servers thatneed to access it. A target defines the portals (IP addresses) that can be used to connect to the iSCSI device,as well as the security settings (if any) that the iSCSI device requires in order to authenticate the servers thatare requesting access to its resources. C. iSCSI Target Storage Provider enables applications on a server thatis connected to an iSCSI target to perform volume shadow copies of data on iSCSI virtual disks. It also enablesyou to manage iSCSI virtual disks by using older applications that require a Virtual Disk Service (VDS)hardware provider, such as the Diskraid command.D. The Internet Storage Name Service (iSNS) protocol is used for interaction between iSNS servers and iSNSclients. iSNS clients are computers, also known as initiators, that are attempting to discover storage devices,also known as targets, on an Ethernet network.http://technet.microsoft.com/en-us/library/cc726015.aspxhttp://technet.microsoft.com/en-us/library/cc772568.aspx


QUESTION 17Your network contains an Active Directory domain named contoso.com. The domain contains a file servernamed Server1. All servers run Windows Server 2012. All domain user accounts have the Division attributeautomatically populated as part of the user provisioning process. The Support for Dynamic Access Control andKerberos armoring policy is enabled for the domain. You need to control access to the file shares on Server1based on the values in the Division attribute and the Division resource property. Which three actions should youperform in sequence?

A.B.C.D.



Explanation:First create a claim type for the property, then create a reference resource property that points back to theclaim. Finally set the classification value on the folder

QUESTION 18Your network contains two Active Directory forests named contoso.com and fabrikam.com. The contoso.comforest contains two domains named corp.contoso.com and contoso.com. You establish a two-way forest trustbetween contoso.com and fabrikam.com. Users from the corp.contoso.com domain report that they cannot logon to client computers in the fabrikam.com domain by using their corp.contoso.com user account. When theytry to log on, they receive

following error message:"The computer you are signing into is protected by an authentication firewall. The specified account is notallowed to authenticate to the computer." Corp.contoso.com users can log on successfully to client computersin the contoso.com domain by using their corp.contoso.com user account credentials. You need to allow usersfrom the corp.contoso.com domain to log on to the client computers in the fabrikam.com forest. What shouldyou do?

A. Configure Windows Firewall with Advanced Security.B. Enable SID history.C. Configure forest-wide authentication.D. Instruct the users to log on by using a user principal name (UPN).


Explanation/Reference:Explanation:C. The forest-wide authentication setting permits unrestricted access by any users in the trusted forest to allavailable shared resources in any of the domains in the trusting forest. http://technet.microsoft.com/en-us/library/cc785875(v=ws.10).aspx

QUESTION 19Your network contains two servers named Server1 and Server2 that run Windows Server 2012. Both servershave the Hyper-V server role installed. The servers have the hardware configurations shown in the followingtable.

Server1 hosts five virtual machines that run Windows Server 2012. You need to move the virtual machinesfrom Server1 to Server2. The solution must minimize downtime. What should you do for each virtual machine?

A. Export the virtual machines from Server1 and import the virtual machines to Server2.B. Perform a live migration.C. Perform a quick migration.D. Perform a storage migration.



QUESTION 20Your network contains an Active Directory domain named contoso.com. The domain contains two serversnamed Server1 and Server2. Both servers have the Hyper-V server role installed. You plan to replicate virtualmachines between Server1 and Server2. The replication will be encrypted by using Secure Sockets Layer(SSL). You need to request a certificate on Server1 to ensure that the virtual machine replication is encrypted.Which two intended purposes should the certificate for Server1 contain? (Each correct answer presents part ofthe solution. Choose two.)

A. Client AuthenticationB. Kernel Mode Code SigningC. Server AuthenticationD. IP Security end systemE. KDC Authentication

Correct Answer: ACSection: (none)Explanation

Explanation/Reference:Explanation:http://blogs.technet.com/b/virtualization/archive/2012/03/13/hyper-v-replica-certificate- requirements.aspx

QUESTION 21Your network contains an Active Directory domain named contoso.com. The domain contains two memberservers named Server1 and Server2 that run Windows Server 2012. Both servers have the Hyper-V server roleinstalled. The network contains an enterprise certification authority (CA). All servers are enrolled automaticallyfor a certificate-based on the Computer certificate template. On Server1, you have a virtual machine namedVM1. VM1 is replicated to Server2. You need to encrypt the replication of VM1. Which two actions should youperform? (Each correct answer presents part of the solution. Choose two.)

A. On Server1, modify the settings of VM1.B. On Server2, modify the settings of VM1.C. On Server2, modify the Hyper-V Settings.D. On Server1, modify the Hyper-V Settings.E. On Server1, modify the settings of the virtual switch to which VM1 is connected.F. On Server2, modify the settings of the virtual switch to which VM1 is connected.

Correct Answer: AFSection: (none)Explanation

Explanation/Reference:Explanation:A. Modify replication settings of VM1 after enabling Replica on Server2 F. Enable Server2 as Hyper- V replicaserverhttp://technet.microsoft.com/en-us/library/jj134240.aspx

Once you change the Hyper-V Settings of Server 2 to encrypt replications with a certificate, you then need tochange the replication information of VM1 to use the secure connection.


QUESTION 22Your network contains an Active Directory domain named contoso.com. The domain contains a file servernamed Server1 that runs Windows Server 2012. You create a user account named User1 in the domain. Youneed to ensure that User1 can use Windows Server Backup to back up Server1. The solution must minimizethe number of administrative rights assigned to User1. What should you do?

A. Add User1 to the Backup Operators group.B. Add User1 to the Power Users group.C. Assign User1 the Backup files and directories user right and the Restore files and directories user right.D. Assign User1 the Backup files and directories user right.



Explanation:Backup Operators have these permissions by default:

However the question explicitly says we need to minimize administrative rights. Since the requirement is forbacking up the data only--no requirement to restore or shutdown--then assigning the "Back up files anddirectories user right" would be the correct answer.

QUESTION 23You have a server named Server1 that runs Windows Server 2012 and is used for testing. A developer at yourcompany creates and installs an unsigned kernel-mode driver on Server1. The developer reports that Server1will no longer start. You need to ensure that the developer can test the new driver. The solution must minimizethe amount of data loss. Which Advanced Boot Option should you select?

A. Disable Driver Signature EnforcementB. Disable automatic restart on system failureC. Last Know Good Configuration (advanced)D. Repair Your Computer


Explanation/Reference:Explanation:A. By default, 64-bit versions of Windows Vista and later versions of Windows will load a kernel- mode driveronly if the kernel can verify the driver signature. However, this default behavior can be disabled to facilitate earlydriver development and non-automated testing. B. specifies that Windows automatically restarts your computerwhen a failure occurs C. Developer would not be able to test the driver as needed D. Removes or repairscritical windows files, Developer would not be able to test the driver as needed and some file losshttp://technet.microsoft.com/en-us/library/jj134246.aspx http://msdn.microsoft.com/en- us/library/windows/hardware/ff547565(v=vs.85).aspx

QUESTION 24Your network contains an Active Directory domain named contoso.com. The domain contains two memberservers named Server1 and Server2. All servers run Windows Server 2012. Server1 and Server2 have theFailover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1.You add two additional nodes to Cluster1. You need to ensure that Cluster1 stops running if three nodes fail.What should you configure?

A. Affinity-NoneB. Affinity-SingleC. The cluster quorum settingsD. The failover settingsE. A file server for general useF. The Handling priorityG. The host priorityH. Live migrationI. The possible ownerJ. The preferred ownerK. Quick migrationL. The Scale-Out File Server



QUESTION 25Your network contains an Active Directory domain named contoso.com. The domain contains two memberservers named Server1 and Server2. All servers run Windows Server 2012. Server1 and Server2 have theFailover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1.You add two additional nodes in Cluster1. You have a folder named Folder1 on Server1 that hosts applicationdata. Folder1 is a folder target in a Distributed File System (DFS) namespace. You need to provide highlyavailable access to Folder1. The solution must support DFS Replication to Folder1. What should youconfigure?




QUESTION 26Your network contains an Active Directory domain named contoso.com. The domain contains two memberservers named Server1 and Server2. All servers run Windows Server 2012. Server1 and Server2 have theNetwork Load Balancing (NLB) feature installed. The servers are configured as nodes in an NLB cluster namedCluster1. Port rules are configured for all clustered applications. You need to ensure that Server2 handles allclient requests to the cluster that are NOT covered by a port rule. What should you configure?


Correct Answer: G

Section: (none)Explanation

Explanation/Reference:Explanation:http://technet.microsoft.com/en-us/library/bb742455.aspx

QUESTION 27Your network contains an Active Directory domain named contoso.com. A previous administrator implementeda Proof of Concept installation of Active Directory Rights Management Services (AD RMS). After the proof ofconcept was complete, the Active Directory Rights Management Services server role was removed. Youattempt to deploy AD RMS. During the configuration of AD RMS, you receive an error message indicating thatan existing AD RMS Service Connection Point (SCP) was found. You need to remove the existing AD RMSSCP. Which tool should you use?

A. ADSI EditB. Active Directory Users and ComputersC. Active Directory Domains and TrustsD. Active Directory Sites and ServicesE. ServicesF. Authorization ManagerG. TPM ManagementH. Certification Authority


Explanation/Reference:Explanation:http://technet.microsoft.com/en-us/library/jj835767(v=ws.10).aspx


QUESTION 28Your network contains an Active Directory forest. The forest contains two domains named contoso.com andfabrikam.com. The functional level of the forest is Windows Server 2003. You have a domain outside the forestnamed adatum.com. You need to configure an access solution to meet the following requirements:

- Users in adatum.com must be able to access resources in contoso.com.- Users in adatum.com must be prevented from accessing resources in fabrikam.com.- Users in both contoso.com and fabrikam.com must be prevented from accessing resources in adatum.com.

What should you create?

A. a one-way realm trust from contoso.com to adatum.comB. a one-way realm trust from adatum.com to contoso.comC. a one-way external trust from contoso.com to adatum.comD. a one-way external trust from adatum.com to contoso.com


Explanation/Reference:Explanation:domain names were changed, so understand the question well You need to make trust relationship wheredomain contoso.com trusts adatum.com. http://technet.microsoft.com/en-us/library/cc728024(v=ws.10).aspx

QUESTION 29Your network contains an Active Directory domain named contoso.com. The domain contains a main office anda branch office. An Active Directory site exists for each office. All domain controllers run Windows Server 2012.The domain contains two domain controllers. DC1 hosts an Active Directory- integrated zone for contoso.com.You add the DNS Server server role to DC2. You discover that the contoso.com DNS zone fails to replicate toDC2. You verify that the domain, schema, and configuration naming contexts replicate from DC1 to DC2. Youneed to ensure that DC2 replicates the contoso.com zone by using Active Directory replication. Which toolshould you use?

A. DnscmdB. DnslintC. RepadminD. NtdsutilE. DNS ManagerF. Active Directory Sites and ServicesG. Active Directory Domains and TrustsH. Active Directory Users and Computers



http://technet.microsoft.com/en-us/library/cc739941(v=ws.10).aspx If you see question about AD Replication,First preference is AD sites and services, then Repadmin and then DNSLINT.

QUESTION 30Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012.The domain contains a domain controller named DC1 that is configured as an enterprise root certificationauthority (CA). All users in the domain are issued a smart card and are required to log on to their domain-joinedclient computer by using their smart card. A user named User1 resigned and started to work for a competingcompany. You need to prevent User1 immediately from logging on to any computer in the domain. The solutionmust not prevent other users from logging on to the domain. Which tool should you use?

A. Active Directory Administrative CenterB. Active Directory Sites and ServicesC. Active Directory Users and ComputersD. the Certification Authority consoleE. the Certificates snap-inF. Certificate TemplatesG. Server ManagerH. the Security Configuration Wizard


Explanation/Reference:Explanation:A. ADAC - Active Directory Administrative Center used to manage users/computers C. ADUC - Active DirectoryUsers and Computers used to manage users/Computers. http://technet.microsoft.com/en-us/library/dd560651(v=ws.10).aspx http://technet.microsoft.com/en-us/library/aa997340(v=exchg.65).aspx

QUESTION 31Your network contains three Active Directory forests. Each forest contains an Active Directory RightsManagement Services (AD RMS) root cluster. All of the users in all of the forests must be able to accessprotected content from any of the forests. You need to identify the minimum number of AD RMS trusts required.How many trusts should you identify?

A. 2B. 3C. 4D. 6




A. Active Directory Sites and ServicesB. Active Directory Administrative CenterC. Server ManagerD. Certificate Templates



QUESTION 33Your network contains an Active Directory domain named contoso.com. The domain contains a domaincontroller named DC1 that runs Windows Server 2012. DC1 has the DHCP Server server role installed. DHCPis configured as shown in the exhibit. (Click the Exhibit button.)

You discover that client computers cannot obtain IPv4 addresses from DC1. You need to ensure that the clientcomputers can obtain IPv4 addresses from DC1. What should you do?

A. Activate the scope.B. Authorize DC1.C. Disable the Allow filters.

D. Disable the Deny filters.




There is no items in the deny List. So it means that client computers MAC addresses is not listed in the allowlist. So we have to disable the "Allow Filters" http://technet.microsoft.com/en- us/library/ee956897(v=ws.10).aspx

QUESTION 34Your network contains an Active Directory domain named contoso.com. The domain contains a file servernamed Server1 and a domain controller named DC1. All servers run Windows Server 2012. A Group Policyobject (GPO) named GPO1 is linked to the domain. Server1 contains a folder named Folder1. Folder1 isshared as Share1. You need to ensure that authenticated users can request assistance when they are deniedaccess to the resources on Server1. Which two actions should you perform? (Each correct answer presentspart of the solution. Choose two.)

A. Assign the Read Attributes NTFS permission on Folder1 to the Authenticated Users group.B. Install the File Server Resource Manager role service on Server1.C. Configure the Customize message for Access Denied errors policy setting of GPO1.D. Enable the Enable access-denied assistance on client for all file types policy setting for GPO1.E. Install the File Server Resource Manager role service on DC1.

Correct Answer: BDSection: (none)Explanation

Explanation/Reference:Explanation:http://technet.microsoft.com/en-us/library/hh831402.aspx#BKMK_1

QUESTION 35Your network contains an Active Directory domain named adatum.com. All domain controllers run WindowsServer 2008 R2. The domain contains a file server named Server6 that runs Windows Server 2012. Server6contains a folder named Folder1. Folder1 is shared as Share1. The NTFS permissions on Folder1 are shown inthe exhibit. (Click the Exhibit button.)

The domain contains two global groups named Group1 and Group2. You need to ensure that only users whoare members of both Group1 and Group2 are denied access to Folder1. Which two actions should youperform? (Each correct answer presents part of the solution. Choose two.)

A. Remove the Deny permission for Group1 from Folder1.B. Deny Group2 permission to Folder1.C. Install a domain controller that runs Windows Server 2012.D. Create a conditional expression.E. Deny Group2 permission to Share1.F. Deny Group1 permission to Share1.

Correct Answer: CDSection: (none)

Explanation

Explanation/Reference:Explanation:* Conditional Expressions for Permission Entries Windows Server 2008 R2 and Windows 7 enhanced Windowssecurity descriptors by introducing a conditional access permission entry. Windows Server 2012 takesadvantage of conditional access permission entries by inserting user claims, device claims, and resourceproperties, into conditional expressions. Windows Server 2012 security evaluates these expressions and allowsor denies access based on results of the evaluation. Securing access to resources through claims is known asclaims-based access control. Claims-based access control works with traditional access control to provide anadditional layer of authorization that is flexible to the varying needs of the enterprise environment. http://social.technet.microsoft.com/wiki/contents/articles/14269.introducing-dynamicaccess- control-en-us.aspx

QUESTION 36Your network contains an Active Directory forest. The forest contains a single domain named contoso.com. Theforest contains two Active Directory sites named Main and Branch1. The sites connect to each other by using asite link named Main-Branch1. There are no other site links.

Each site contains several domain controllers. All domain controllers run Windows Server 2012. Your companyplans to open a new branch site named Branch2. The new site will have a WAN link that connects to the Mainsite only. The site will contain two domain controllers that run Windows Server 2012. You need to create a newsite and a new site link for Branch2. The solution must ensure that the domain controllers in Branch2 onlyreplicate to the domain controllers in Branch1 if all of the domain controllers in Main are unavailable. Whichthree actions should you perform? To answer, move the three appropriate actions from the list of actions to theanswer area and arrange them in the correct order.

A.B.C.D.



QUESTION 37Your network contains an Active Directory domain named contoso.com. The domain contains a domaincontroller named DC1 that runs Windows Server 2012. DC1 has the DNS Server server role installed. Thenetwork contains client computers that run either Linux, Windows 7, or Windows 8. You have a standardprimary zone named adatum.com as shown in the exhibit.(Click the Exhibit button.)

You plan to configure Name Protection on all of the DHCP servers. You need to configure the adatum.comzone to support Name Protection. Which two configurations should you perform from DNS Manager? (Eachcorrect answer presents part of the solution. Choose two.)

A. Sign the zone.B. Store the zone in Active Directory.C. Modify the Security settings of the zone.D. Configure Dynamic updates.


Explanation/Reference:Explanation:http://technet.microsoft.com/en-us/library/ee941152(v=ws.10).aspx


QUESTION 38Your network contains two servers named Server1 and Server2 that run Windows Server 2012. Server1 andServer2 have the Hyper-V server role installed. Server1 and Server2 are configured as Hyper-V replicas ofeach other. Server1 hosts a virtual machine named VM1. VM1 is

replicated to Server2. You need to verify whether the replica of VM1 on Server2 is functional. The solution mustensure that VM1 remains accessible to clients. What should you do from Hyper-V Manager?

A. On Server1, execute a Planned Failover.B. On Server1, execute a Test Failover.C. On Server2, execute a Planned Failover.D. On Server2, execute a Test Failover.


Explanation/Reference:Explanation:A. Server 1 is houses VM1 and it is replicated to Server2 - wrong server to failover and this is not a planned failover caseB. Wrong server correct failover typeC. Wrong server, wrong failover typeD. Right server and failover typehttp://blogs.technet.com/b/virtualization/archive/2012/07/31/types-of-failover-operations-inhyper- v-replica-partii-planned-failover.aspxhttp://blogs.technet.com/b/virtualization/archive/2012/07/26/types-of-failover-operations-inhyper- v-replica.aspx

QUESTION 39You have a failover cluster named Cluster1 that contains four nodes. All of the nodes run Windows Server2012. You need to force every node in Cluster1 to contact immediately the Windows Server Update Services(WSUS) server on your network for updates. Which tool should you use?

A. The Add-CauClusterRole cmdletB. The Wuauclt commandC. The Wusa commandD. The Invoke-CauScan cmdlet


Explanation/Reference:Explanation:A. Adds the Cluster-Aware Updating (CAU) clustered role that provides the self-updating functionality to thespecified cluster.B. the wuauclt utility allows you some control over the functioning of the Windows Update Agent C. TheWusa.exe file is in the %windir%\System32 folder. The Windows Update Standalone Installer uses theWindows Update Agent API to install update packages. Update packages have an .msu file name extension.The .msu file name extension is associated with the Windows Update Standalone Installer.D. Performs a scan of cluster nodes for applicable updates and returns a list of the initial set of updates thatwould be applied to each node in a specified cluster. http://technet.microsoft.com/en- us/library/hh847235(v=wps.620).aspx http://technet.microsoft.com/en- us/library/cc720477(v=ws.10).aspx http://support.microsoft.com/kb/934307 http://technet.microsoft.com/en-us/library/hh847228(v=wps.620).aspx

QUESTION 40Your network contains an Active Directory domain named contoso.com. The network contains a file servernamed Server1 that runs Windows Server 2012. You are configuring a central access policy for temporaryemployees. You enable the Department resource property and assign the property a suggested value of Temp.You need to configure a target resource condition for the central access rule that is scoped to resourcesassigned to Temp only. Which condition should you use?

A. (Temp.Resource Equals "Department")B. (Resource.Temp Equals "Department")C. (Resource.Department Equals "Temp")D. (Department.Value Equals "Temp")



http://technet.microsoft.com/fr-fr/library/hh846167.aspx

QUESTION 41Your network contains a server named Server1 that runs Windows Server 2012. Server1 has the ActiveDirectory Certificate Services server role installed and is configured as a standalone certification authority (CA).You install a second server named Server2. You install the Online Responder role service on Server2. Youneed to ensure that Server1 can issue an Online Certificate Status Protocol (OCSP) Response Signingcertificate to Server2. What should you do?

A. On Server1, run the certutil.exe command and specify the -setreg parameter.B. On Server2, run the certutil.exe command and specify the -policy parameter.C. On Server1, configure Security for the OCSP Response Signing certificate template.D. On Server2, configure Issuance Requirements for the OCSP Response Signing certificate template.


Explanation/Reference:Explanation:http://technet.microsoft.com/en-us/library/cc732526.aspx

QUESTION 42Your network contains an Active Directory domain named adatum.com. The domain contains a server namedCA1 that runs Windows Server 2012. CA1 has the Active Directory Certificate Services server role installed andis configured to support key archival and recovery. You need to ensure that a user named User1 can decryptprivate keys archived in the Active Directory Certificate Services (AD CS) database. The solution must preventUser1 from retrieving the private keys from the AD CS database. What should you do?

A. Assign User1 the Issue and Manage Certificates permission to Server1.B. Assign User1 the Read permission and the Write permission to all certificate templates.C. Provide User1 with access to a Key Recovery Agent certificate and a private key.D. Assign User1 the Manage CA permission to Server1.



QUESTION 43Your network contains an Active Directory domain named contoso.com. The domain contains two sites namedSite1 and Site2 and two domain controllers named DC1 and DC2. Both domain controllers are located in Site1.You install an additional domain controller named DC3 in Site1 and you ship DC3 to Site2. A technicianconnects DC3 to Site2. You discover that users in Site2 are authenticated by all three domain controllers. Youneed to ensure that the users in Site2 are authenticated by DC1 or DC2 only if DC3 is unavailable. What shouldyou do?

A. From Network Connections, modify the IP address of DC3.B. In Active Directory Sites and Services, modify the Query Policy of DC3.C. From Active Directory Sites and Services, move DC3.D. In Active Directory Users and Computers, configure the insDS-PrimaryComputer attribute for the users in

Site2.



http://social.technet.microsoft.com/wiki/contents/articles/7573.active-directory-certificateservices- pki-keyarchival-and-anagement.aspx#Protecting_Key_Recovery_Agent_Keys

QUESTION 44Your network contains two Active Directory forests named contoso.com and adatum.com. Contoso.comcontains one domain. Adatum.com contains a child domain named child.adatum.com. Contoso.com has a one-way forest trust to adatum.com. Selective authentication is enabled on the forest trust. Several user accountsare migrated from child.adatum.com to adatum.com. Users report that after the migration, they fail to accessresources in contoso.com. The users successfully accessed the resources in contoso.com before the accountswere migrated. You need to ensure that the migrated users can access the resources in contoso.com. Whatshould you do?

A. Replace the existing forest trust with an external trust.B. Run netdom and specify the /quarantine attribute.C. Disable SID filtering on the existing forest trust.D. Disable selective authentication on the existing forest trust.


Explanation/Reference:Explanation:B. Enables administrators to manage Active Directory domains and trust relationships from the commandprompT, /quarantine Sets or clears the domain quarantine C. Need to gran access to the resources incontoso.comD. Selective authentication over a forest trust restricts access to only those users in a trusted forest who havebeen explicitly given authentication permissions to computer objects (resource computers) that reside in thetrusting foresthttp://technet.microsoft.com/en-us/library/cc755321(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc758152(v=ws.10).aspx

QUESTION 45You have four servers that run Windows Server 2012. The servers have the Failover Clustering featureinstalled. You deploy a new cluster named Cluster1. Cluster1 is configured as shown in the following table.

Site2 is a disaster recovery site. Server1, Server2, and Server3 are configured as the preferred owners of thecluster roles. Dynamic quorum management is disabled. You plan to perform hardware maintenance onServer3. You need to ensure that if the WAN link between Site1 and Site2 fails while you are performingmaintenance on Server3, the cluster resource will remain available in Site1. What should you do?

A. Enable dynamic quorum management.B. Remove the node vote for Server3.C. Add a file share witness in Site1.D. Remove the node vote for [C1] Server4 and Server5.


Explanation/Reference:Explanation:http://msdn.microsoft.com/en-us/library/hh270280.aspx#VotingandNonVotingNodes

QUESTION 46Your network contains an Active Directory domain named contoso.com. The domain contains a server namedServer2 that runs Windows Server 2012. You are a member of the local Administrators group on Server2. Youinstall an Active Directory Rights Management Services (AD RMS) root cluster on Server2. You need to ensurethat the AD RMS cluster is discoverable automatically by the AD RMS client computers and the users incontoso.com. Which additional configuration settings should you configure?To answer, select the appropriate tab in the answer area.

A.B.C.D.


Explanation/Reference:"First Test, First Pass" - www.lead2pass.com 45Microsoft 70-412 Exam

QUESTION 47You plan to deploy a failover cluster that will contain two nodes that run Windows Server 2012. You need toconfigure a witness disk for the failover cluster. How should you configure the witness disk? To answer, dragthe appropriate configurations to the correct location or locations. Each configuration may be used once, morethan once, or not at all. You may need to drag the split bar between panes or scroll to view content.

A.B.C.D.



QUESTION 48You have a test server named Server1 that is configured to dual-boot between Windows Server 2008 R2 andWindows Server 2012. You start Server1 and you discover that the boot entry for Windows Server 2008 R2 nolonger appears on the boot menu. You start Windows Server 2012 on Server1 and you discover the diskconfigurations shown in the following table.

You need to restore the Windows Server 2008 R2 boot entry on Server1. What should you do?

A. Run bcdedit.exe and specify the /createstore parameter.B. Run bootrec.exe and specify the /scanos parameter.C. Run bcdboot.exe d:\windows.

D. Run bootrec.exe and specify the /rebuildbcd parameter.


Explanation/Reference:Explanation:A. BCDEdit is a command-line tool for managing BCD stores. It can be used for a variety of purposes, includingcreating new stores, modifying existing stores, adding boot menu options, /Createstore Creates a new emptyboot configuration data store. The created store is not a system

store. B. Bootrec.exe tool to troubleshoot "Bootmgr Is Missing" issue. The /ScanOs option scans all disks forinstallations that are c mpatible with Windows Vista or Windows 7. Additionally, this option displays the entriesthat are currently not in the BCD store. Use this option when there are Windows Vista or Windows 7installations that the Boot Manager menu does not list.C.D. Bootrec.exe tool to troubleshoot "Bootmgr Is Missing" issue. The /ScanOs option scans all disks forinstallations that are compatible with Windows Vista or Windows 7. Additionally, this option displays the entriesthat are currently not in the BCD store. Use this option when there are Windows Vista or Windows 7installations that the Boot Manager menu does not list. http://technet.microsoft.com/en-us/library/cc709667(v=ws.10).aspx http://support.microsoft.com/kb/927392/en-us

QUESTION 49You have a DHCP server named Server1. Server1 has one network adapter. Server1 is located on a subnetnamed Subnet1. Server1 has scope named Scope1. Scope1 contains IP addresses for the 192.168.1.0/24network. Your company is migrating the IP addresses on Subnet1 to use a network ID of 10.10.0.0/16. OnServer11 you create a scope named Scope2. Scope2 contains IP addresses for the 10.10.0.0/16 network. Youneed to ensure that clients on Subnet1 can receive IP addresses from either scope. What should you create onServer1?

A. A multicast scopeB. A scopeC. A superscopeD. A split-scope


Explanation/Reference:Explanation:A. Multicasting is the sending of network traffic to a group of endpointsdestination hosts. Only those membersin the group of endpoints hosts that are listening for the multicast traffic (the multicast group) process the

multicast trafficB. A scope is an administrative grouping of IP addresses for computers on a subnet that use the Dynamic HostConfiguration Protocol (DHCP) service. The administrator first creates a scope for each physical subnet andthen uses the scope to define the parameters used by clients. C. A superscope is an administrative feature ofDynamic Host Configuration Protocol (DHCP) servers running Windows Server 2008 that you can create andmanage by using the DHCP Microsoft Management Console (MMC) snap-in. By using a superscope, you cangroup multiple scopes as a single administrative entity.D.http://technet.microsoft.com/en-us/library/dd759152.aspx http://technet.microsoft.com/en- us/library/dd759218.aspx http://technet.microsoft.com/en-us/library/dd759168.aspx

QUESTION 50Your network contains an Active Directory domain named adatum.com. The domain contains a domaincontroller named DC1 that runs Windows Server 2012. On Dc1, you open DNS Manager as shown in theexhibit. (Click the Exhibit button.)

You need to change the zone type of the contoso.com zone from an Active Directory-integrated zone to astandard primary zone. What should you do before you change the zone type?

A. Unsign the zone.B. Modify the Zone Signing Key (ZSK).C. Modify the Key Signing Key (KSK).D. Change the Key Master.


Explanation/Reference:Explanation:A. Lock icon indicating that it is currently signed with DNSSEC, zone must be unsignes B. An authentication keythat corresponds to a private key used to sign a zone. C. The KSK is an authentication key that corresponds toa private key used to sign one or more other signing keys for a given zone. Typically, the private keycorresponding to a KSK will sign a ZSK, which in turn has a corresponding private key that will sign other zonedata.D.http://technet.microsoft.com/en-us/library/hh831411.aspx http://technet.microsoft.com/en- us/library/ee649132(v=ws.10).aspx


Exam B

QUESTION 1You have a server named Server1 that runs Windows Server 2012. Server1 has the DNS Server server roleinstalled. You need to configure Server1 to resolve queries for single-label DNS names. Which two actionsshould you perform? (Each correct answer presents part of the solution. Choose two.)

A. Run the Set-DNSServerGlobalNameZone cmdlet.B. Modify the DNS suffix search list setting.C. Modify the Primary DNS Suffix Devolution setting.D. Create a zone named ".".E. Create a zone named GlobalNames.F. Run the Set-DNSServerRootHint cmdlet.

Correct Answer: EFSection: (none)Explanation

Explanation/Reference:Explanation:http://technet.microsoft.com/en-us/library/cc731744.aspx http://technet.microsoft.com/en- us/library/jj649907(v=wps.620).aspx

QUESTION 2Your network contains an Active Directory domain named contoso.com. The domain contains two serversnamed Server1 and Server2 that run Windows Server 2012. Server1 has the IP Address Management (IPAM)Server feature installed. Server2 has the DHCP Server server role installed. A user named User1 is a memberof the IPAM Users group on Server1. You need to ensure that User1 can use IPAM to modify the DHCP scopeson Server2. The solution must minimize the number of permissions assigned to User1. To which group shouldyou add User1?

A. DHCP Administrators on Server2B. IPAM ASM Administrators on Server1C. IPAMUG in Active DirectoryD. IPAM MSM Administrators on Server1


Explanation/Reference:Explanation:The user need rights to change DHCP not IPAMC. Members of the DHCP Administrators group can view and modify any data at the DHCP server.

http://technet.microsoft.com/en-us/library/jj878348.aspx http://technet.microsoft.com/en- us/library/cc737716(v=ws.10).aspx

QUESTION 3You have a server named DC2 that runs Windows Server 2012. DC2 contains a DNS zone namedadatum.com. The adatum.com zone is shown in the exhibit. (Click the Exhibit button.)

You need to configure DNS clients to perform DNSSEC validation for the adatum.com DNS domain.What should you configure?

A. The Network Location settingsB. A Name Resolution PolicyC. The DNS Client settingsD. The Network Connection settings


Explanation/Reference:B. The Name Resolution Policy Table (NRPT) is a table that contains rules you can configure to specify DNSsettings or special behavior for names or namespaces. The NRPT can be configured using Group Policy or byusing the Windows Registry.C. client component that resolves and caches Domain Name System (DNS) domain names. When the DNSClient service receives a request to resolve a DNS name that it does not contain in its cache, it queries anassigned DNS server for an IP address for the name D. Network connections make it possible for computers toaccess resources on the network and the internet http://technet.microsoft.com/en-us/library/hh831411.aspx#config_client1


QUESTION 4Your network contains an Active Directory domain named contoso.com. The domain contains two serversnamed Server1 and Server2 that run Windows Server 2012. Server1 has the DHCP Server server roleinstalled. Server2 has the Hyper-V server role installed. Server2 has an IP address of 192.168.10.50. Server1has a scope named Scope1 for the 192.168.10.0/24 network. You plan to deploy 20 virtual machines onServer2 that will be connected to the external network. The MAC addresses for the virtual machines will beginwith 00-15-SD-83-03. You need to configure Server1 to offer the virtual machines IP addresses from192.168.10.200 to 192.168.10.21g. Physical computers on the network must be offered IP addresses outsidethis range. You want to achieve this goal by using the minimum amount of administrative effort. What shouldyou do from the DHCP console?

A. Create reservations.B. Create a policy.C. Delete Scope1 and create two new scopes.D. Configure Allow filters and Deny filters.


Explanation/Reference:Explanation:A. With client reservations, it is possible to reserve a specific IP address for permanent use by a DHCP client. Anew feature in Windows Server 2012 called policy based assignment allows for even greater flexibility.B. Policy based assignment allows the policy to be scoped to a MAC address and IP range C. D. A DHCPserver offers its services to the DHCP clients based on the availability of MAC address

filtering. Once the Allow filter is set, all DHCP operations are based on the access controls (allow/deny).http://blogs.technet.com/b/teamdhcp/archive/2012/08/22/granular-dhcp-serveradministration- using-dhcppolicies-in-windows-server-2012.aspxhttp://technet.microsoft.com/en-us/library/hh831538.aspx http://technet.microsoft.com/en- us/library/ee405265(v=ws.10).aspx

QUESTION 5Your network contains an Active Directory domain named contoso.com. The domain contains two serversnamed Server1 and Server2. Both servers have the IP Address Management (IPAM) Server feature installed.You have a support technician named Tech1. Tech1 is a member of the IPAM Administrators group on Server1and Server2. You need to ensure that Tech 1 can use Server Manager on Server1 to manage IPAM onServer2. To which group on Server2 should you add Tech1.

A. Remote Management UsersB. IPAM MSM AdministratorsC. IPAM AdministratorsD. WinRM Remote WM1 Users



QUESTION 6Your network contains two Active Directory forests named contoso.com and adatum.com. All of the domaincontrollers in both of the forests run Windows Server 2012. The adatum.com domain contains a file servernamed Servers. Adatum.com has a one-way forest trust to contoso.com. A contoso.com user name User10attempts to access a shared folder on Servers and receives the error message shown in the exhibit. (Click theExhibit button.)

You verify that the Authenticated Users group has Read permissions to the Data folder. You need to ensurethat User10 can read the contents of the Data folder on Server5 in the adatum.com domain.What should you do?

A. Grant the Other Organization group Read permissions to the Data folder.B. Modify the list of logon workstations of the contoso\User10 user account.C. Enable the Netlogon Service (NP-In) firewall rule on Server5.D. Modify the permissions on the Server5 computer object in Active Directory.


Explanation/Reference:Explanation:To resolve the issue, I had to open up AD Users and Computers --> enable Advanced Features - -> Select theComputer Object --> Properties --> Security --> Add the Group I want to allow access to the computer (in thiscase, DomainA\Domain users) and allow "Allowed to Authenticate". Once I did that, everything worked:

QUESTION 7Your network contains an Active Directory domain named contoso.com. The domain contains two ActiveDirectory sites named Site1 and Site2. You discover that when the account of a user in Site1 is locked out, theuser can still log on to the servers in Site2 for up to 15 minutes by using Remote Desktop Services (RDS). Youneed to reduce the amount of time it takes to synchronize account lockout information across the domain.Which attribute should you modify? To answer, select the appropriate attribute in the answer area.

A.B.C.D.



QUESTION 8Your network contains an Active Directory forest. The forest contains two domains named contoso.com andfabrikam.com. The functional level of the forest is Windows Server 2003. You have a domain outside the forestnamed adatum.com. You need to configure an access solution to meet the following requirements:



A. a one-way external trust from adatum.com to fabrikam.comB. a one-way realm trust from fabrikam.com to adatum.comC. a one-way realm trust from adatum.com to fabrikam.com

D. a one-way external trust from fabrikam.com to adatum.com


Explanation/Reference:Explanation:A. A one-way trust is a unidirectional authentication path that is created between two domains. This means thatin a one-way trust between Domain A and Domain B, users in Domain A can access resources in Domain B.However, users in Domain B cannot access resources in Domain A. This would allow adatum.com usersaccess to contoso which is desired B. This would allow contoso.com users access to adatum which must beprevented and used for non windows realm to AD C. This would allow adatum.com users access to contosowhich is desired but realm trust types are used for non windows realm to AD D. This would allow adatum usersaccess to contoso which must be prevented and You need to make trust relationship where domaincontoso.com trusts adatum.com. NOTE: On exam the domain names were changed, so understand thequestion well http://technet.microsoft.com/en-us/library/cc728024(v=ws.10).aspx

QUESTION 9Your network contains an Active Directory domain named contoso.com. The domain contains a main office anda branch office. An Active Directory site exists for each office. All domain controllers run Windows Server 2012.The domain contains two domain controllers. The domain controllers are configured as shown in the followingtable.

DC1 hosts an Active Directory-integrated zone for contoso.com. You add the DNS Server server role to DC2.You discover that the contoso.com DNS zone fails to replicate to DC2. You verify that the domain, schema, andconfiguration naming contexts replicate from DC1 to DC2. You need to ensure that DC2 replicates thecontoso.com zone by using Active Directory replication.

Which tool should you use?

A. Active Directory Sites and ServicesB. NtdsutilC. DNS Manager

D. Active Directory Domains and Trusts


Explanation/Reference:Explanation:A. To control replication between two sites, you can use the Active Directory Sites and Services snap- in toconfigure settings on the site link object to which the sites are added. By configuring settings on a site link, youcan control when replication occurs between two or more sites, and how oftenB. Ntdsutil.exe is a command-line tool that provides management facilities for Active Directory Domain Services(AD DS) and Active Directory Lightweight Directory Services (AD LDS). You can use the ntdsutil commands toperform database maintenance of AD DS, manage and control single master operations, and remove metadataleft behind by domain controllers that were removed from the network without being properly uninstalled.C. DNS Manager is the tool you'll use to manage local and remote DNS Servers D. Active Directory Domainsand Trusts is the Microsoft Management Console (MMC) snap-in that you can use to administer domain trusts,domain and forest functional levels, and user principal name (UPN) suffixes.NOTE: If you see question about AD Replication, First preference is AD sites and services, then Repadmin andthen DNSLINT.http://technet.microsoft.com/en-us/library/cc731862.aspx http://technet.microsoft.com/en- us/library/cc753343(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc722541.aspx http://technet.microsoft.com/en-us/library/cc770299.aspx

Note: If you see question about AD Replication, First preference is AD sites and services, then Repadmin andthen DNSLINT.

QUESTION 10Your network contains an Active Directory forest. The forest contains two domains named contoso.com andfabrikam.com. The functional level of the forest is Windows Server 2003. The contoso.com domain containsdomain controllers that run either Windows Server 2008 or Windows Server 2008 R2. The functional level ofthe domain is Windows Server 2008. The fabrikam.com domain contains domain controllers that run eitherWindows Server 2003 or Windows Server 2008. The functional level of the domain is Windows Server 2003.The contoso.com domain contains a member server named Server1 that runs Windows Server 2012. Youinstall the Active Directory Domain Services server role on Server1. You need to add Server1 as a new domaincontroller in the contoso.com domain. What should you do?

A. Run the Active Directory Domain Services Configuration Wizard.B. Run adprep.exe /domainprep, and then run dcpromo.exe.C. Raise the functional level of the forest, and then run dcprorno.exe.D. Modify the Computer Name/Domain Changes properties.


Explanation/Reference:Explanation:Windows Server 2012 requires a Windows Server 2003 forest functional level. That is, before you can add adomain controller that runs Windows Server 2012 to an existing Active Directory forest, the forest functionallevel must be Windows Server 2003 or higher. http://blogs.technet.com/b/askpfeplat/archive/2012/09/03/introducing-the-first-windowsserver- 2012-domaincontroller.aspxhttp://technet.microsoft.com/en-us/library/dd464018(v=ws.10).aspx

http://technet.microsoft.com/en-us/library/jj574134.aspx


QUESTION 11Your network contains an Active Directory forest. The forest contains two domains named contoso.com andfabrikam.com. The forest functional level is Windows 2000. The contoso.com domain contains domaincontrollers that run either Windows Server 2008 or Windows Server 2008 R2. The domain functional level isWindows Server 2008. The fabrikam.com domain contains domain controllers that run either Windows 2000Server or Windows Server 2003. The domain functional level is Windows 2000 native. The contoso.comdomain contains a member server named Server1 that runs Windows Server 2012. You need to add Server1as a new domain controller in the contoso.com domain. What should you do first?

A. Raise the functional level of the contoso.com domain to Windows Server 2008 R2.B. Upgrade the domain controllers that run Windows Server 2008 to Windows Server 2008 R2.C. Raise the functional level of the fabrikam.com domain to Windows Server 2003.D. Decommission the domain controllers that run Windows 2000.E. Raise the forest functional level to Windows Server 2003.


Explanation/Reference:Explanation:D. Server 2003 is the minimum Domain Functional level for any domain in the forest Windows Server 2012requires a Windows Server 2003 forest functional level. That is, before you can add a domain controller thatruns Windows Server 2012 to an existing Active Directory forest, the forest functional level must be WindowsServer 2003 or higher.http://technet.microsoft.com/en-us/library/cc771294.aspx

QUESTION 12Your network contains an Active Directory domain named adatum.com. The domain contains four servers. Theservers are configured as shown in the following table.

You plan to deploy an enterprise certification authority (CA) on a server named Server5. Server5 will be used toissue certificates to domain-joined computers and workgroup computers. You need to identify which server youmust use as the certificate revocation list (CRL) distribution point for Server5. Which server should you identify?

A. Server3B. Server2C. Server4D. Server 1


Explanation/Reference:Explanation:A. We cannot use AD DS because workgroup computers must access CRL distribution point B. We cannot useFile Share because workgroup computers must access CRL distribution point C. Public facing web server canbe usedD. AD DS, Web & File Share only

http://technet.microsoft.com/en-us/library/cc771079.aspx


QUESTION 13You have a server named Server1 that has the Active Directory Certificate Services server role installed.Server1 uses a hardware security module (HSM) to protect the private key of Server1. You need to ensure thatthe Active Directory Certificate Services (AD CS) database, log files, and private key are backed up. Youperform regular backups of the HSM module by using a backup utility provided by the HSM manufacturer. Whatelse should you do?

A. Run the certutil.exe command and specify the -backupkey parameter.B. Run the certutil.exe command and specify the -backupdb parameter.C. Run the certutil.exe command and specify the -backup parameter.D. Run the certutil.exe command and specify the -dump parameter.


Explanation/Reference:Explanation:A. Backup the Active Directory Certificate Services certificate and private key B. Backup the Active DirectoryCertificate Services database C. Backup Active Directory Certificate Services D. Dump configurationinformation or fileshttp://technet.microsoft.com/en-us/library/cc732443.aspx#BKMK_backupKey http://technet.microsoft.com/en-us/library/cc732443.aspx#BKMK_backupDB http://technet.microsoft.com/en-us/library/cc732443.aspx#BKMK_backup http://technet.microsoft.com/library/cc732443.aspx#BKMK_dump

QUESTION 14Your network contains an Active Directory domain named contoso.com. The domain contains a server namedServer1 that runs Windows Server 2012. Server1 has the Active Directory Federation Services (AD FS) serverrole installed. Adatum.com is a partner organization. You are helping the administrator of adatum.com set up afederated trust between adatum.com and contoso.com. The administrator of adatum.com asks you to provide afile containing the federation metadata of contoso.com. You need to identify the location of the federationmetadata file. Which node in the AD FS console should you select?To answer, select the appropriate node in the answer area.

A.B.C.D.



QUESTION 15Your network contains three Active Directory forests. Each forest contains an Active Directory RightsManagement Services (AD RMS) root cluster. All of the users in all of the forests must be able to accessprotected content from any of the forests. You need to identify the minimum number of AD RMS trusts required.How many trusts should you identify?

A. 2B. 3C. 4D. 6


Explanation/Reference:Explanation:3 Forests. Bi Direcrional test needed means each forest needs 2 other forests TUD file. 3 x 2 =6 http://technet.microsoft.com/en-us/library/ee221071(v=ws.10).aspx


A. Active Directory Sites and ServicesB. Active Directory Administrative CenterC. Server ManagerD. Certificate Templates


Explanation/Reference:Explanation:B. Disable user1 from ADAChttp://technet.microsoft.com/en-us/library/dd861307.aspx

QUESTION 17Your network contains a server named Server1 that runs Windows Server 2012. Server1 has the Hyper-Vserver role installed. Server1 hosts 10 virtual machines that run Windows Server 2012. You add a new servernamed Server2. Server2 has faster hard disk drives, more RAM, and a different processor manufacturer thanServer1. You need to move all of the virtual machines from Server1 to Server2. The solution must minimizedowntime. What should you do for each virtual machine?

A. Perform a quick migration.B. Perform a storage migration.C. Export the virtual machines from Server1 and import the virtual machines to Server2.D. Perform a live migration.


Explanation/Reference:Explanation:C. Other options require same CPU family and clusterhttp://technet.microsoft.com/en-us/library/hh848491.aspx http://technet.microsoft.com/en- us/library/hh848495.aspx http://technet.microsoft.com/en-us/library/jj628158.aspx The different processor manufactureris the key here. Storage, Live, and Quick all require same manufacturer.

QUESTION 18You have a datacenter that contains six servers. Each server has the Hyper-V server role installed and runsWindows Server 2012. The servers are configured as shown in the following table.

Host4 and Host5 are part of a cluster named Cluster1. Cluster1 hosts a virtual machine named VM1. You needto move VM1 to another Hyper-V host. The solution must minimize the downtime of VM1. To which server andby which method should you move VM1?

A. To Host3 by using a storage migrationB. To Host6 by using a storage migrationC. To Host2 by using a live migrationD. To Host1 by using a quick migration


Explanation/Reference:Explanation:A. Host3 is the only option to allow minimum downtime and has same processor manufacturers B. Live StorageMigration requires same processor manufacturers C. Live migration requires same same processormanufacturers D. Quick migration has downtimeNOTE: Exam may have more options but same answerhttp://technet.microsoft.com/en-us/library/dd446679(v=ws.10).aspx http://technet.microsoft.com/en-us/library/hh831656.aspx http://technet.microsoft.com/en- us/library/jj628158.aspx

QUESTION 19Your network contains an Active Directory domain named contoso.com. The domain contains two memberservers named Server1 and Server2. All servers run Windows Server 2012. Server1 and Server2 have theFailover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1.Cluster1 hosts an application named App1. You need to ensure that Server2 handles all of the client requeststo the cluster for App1. The solution must ensure that if Server2 fails, Server1 becomes the active node forAppl. What should you configure?

A. Affinity-NoneB. Affinity-SingleC. The cluster quorum settingsD. The failover settingsE. A file server for general useF. The Handling priorityG. The host priorityH. Live migrationI. The possible ownerJ. The preferred ownerK. Quick migrationL. the Scale-Out File Server

Correct Answer: JSection: (none)Explanation

Explanation/Reference:Explanation:http://blogs.msdn.com/b/clustering/archive/2008/10/14/9000092.aspx The preferred owner in a 2 server clusterwill always be the active node unless it is down.

QUESTION 20Your network contains an Active Directory domain named contoso.com. The domain contains two memberservers named Server1 and Server2. All servers run Windows Server 2012. Server1 and Server2 have theFailover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1.You add two additional nodes to Cluster1. You need to ensure that Cluster1 stops running if three nodes fail.What should you configure?



Explanation/Reference:Explanation:C. The quorum configuration in a failover cluster determines the number of failures that the cluster can sustain.http://technet.microsoft.com/en-us/library/cc731739.aspx

QUESTION 21Your network contains an Active Directory domain named contoso.com. The domain contains two memberservers named Server1 and Server2. All servers run Windows Server 2012. Server1 and Server2 have theFailover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1.You configure File Services and DHCP as clustered resources for Cluster1. Server1 is the active node for bothclustered resources. You need to ensure that if two consecutive heartbeat messages are missed betweenServer1 and Server2, Server2 will begin responding to DHCP requests. The solution must ensure that Server1remains the active node for the File Services clustered resource for up to five missed heartbeat messages.What should you configure?



Explanation/Reference:Explanation:A. The number of heartbeats that can be missed before failover occurs is known as the heartbeat thresholdhttp://technet.microsoft.com/en-us/library/dn265972.aspx http://technet.microsoft.com/en- us/library/dd197562(v=ws.10).aspxhttp://blogs.msdn.com/b/clustering/archive/2012/11/21/10370765.aspx

QUESTION 22Your network contains an Active Directory domain named contoso.com. The domain contains two memberservers named Server1 and Server2 that run Windows Server 2012. You configure a new failover clusternamed Cluster1. Server1 and Server2 are nodes in Cluster1. You need to configure the disk that will be usedas a witness disk for Cluster1. How should you configure the witness disk?To answer, drag the appropriate configurations to the correct location or locations. Each configuration may beused once, more than once, or not at all. You may need to drag the split bar between panes or scroll to viewcontent.

A.B.C.D.



QUESTION 23Your network contains an Active Directory forest named contoso.com that contains a single domain. The forestcontains three sites named Site1, Site2, and Site3. Domain controllers run either Windows Server 2008 R2 orWindows Server 2012. Each site contains two domain controllers. Site1 and Site2 contain a global catalogserver. You need to create a new site link between Site1 and Site2. The solution must ensure that the site linksupports the replication of all the naming contexts. From which node should you create the site link? Toanswer, select the appropriate node in the answer area.

A.B.C.D.



QUESTION 24Your network contains an Active Directory domain named adatum.com. All servers run Windows Server 2012.All domain controllers have the DNS Server server role installed. You have a domain controller named DC1. OnDC1, you create an Active Directory-integrated zone named adatum.com and you sign the zone by usingDNSSEC. You deploy a new read-only domain controller (RODC) named R0DC1. You need to ensure that thecontoso.com zone replicates to R0DC1. What should you configure on DC1?To answer, select the appropriate tab in the answer area.

A.B.C.D.



QUESTION 25You have a server named Server1 that runs Windows Server 2012. Server1 has a single volume that isencrypted by using BitLocker Drive Encryption (BitLocker). BitLocker is configured to save encryption keys to aTrusted Platform Module (TPM). Server1 is configured to perform a daily system image backup. Themotherboard on Server1 is upgraded. After the upgrade, Windows Server 2012 on Server1 fails to start. Youneed to start the operating system on Server1 as soon as possible.What should you do?Start Server1 from the installation media. Run startrec.exe. Move the disk to a server that has a model of theold motherboard. Start the server from the installation media. Run bcdboot.exe. Move the disk to a server thathas a model of the old motherboard. Start the server. Run tpm.msc. Start Server1 from the installation media.Perform a system image recovery.

A. Start Server1 from the installation media. Run startrec.exe.B. Move the disk to a server that has a model of the old motherboard.

Start the server from the installation media.Run bcdboot.exe.

C. Move the disk to a server that has a model of the old motherboard.Start the server. Run tpm.msc.

D. Start Server1 from the installation media. Perform a system image recovery.

Correct Answer: DSection: (none)

Explanation

Explanation/Reference:Explanation:Encryption keys are lost. Nothing mentioned about password/keys recovery. My point is that the only way is torestore the server from a backup.http://social.technet.microsoft.com/Forums/windows/en-US/6b34b4da-b1e2-4038- 8d6d192f973cadea/usingsystem-image-with-a-bitlocker-system-drive

QUESTION 26You have a test server named Server1 that is configured to dual-boot between Windows Server 2008 R2 andWindows Server 2012. You start Server1 and you discover that the boot entry for Windows Server 2008 R2 nolonger appears on the boot menu. You start Windows Server 2012 on Server1 and you discover the diskconfigurations shown in the following table.

You need to restore the Windows Server 2008 R2 boot entry on Server1. What should you do?

A. Run bootrec.exe and specify the /scanos parameter.B. Run bcdedit.exe and specify the /create store parameter.C. Run bootcfg.exe and specify the /copy parameter.D. Run bootrec.exe and specify the /rebuildbcd parameter.



QUESTION 27You have 3 server named LON-DC1 that runs Windows Server 2012. An iSCSI virtual disk namedVirtualiSCSIl.vhd exists on LON-DC1 as shown in the exhibit. (Click the Exhibit button.)

You create a new iSCSI virtual disk named VirtualiSCSI2.vhd by using the existing itgt iSCSI target.VirtualiSCSIl.vhd is removed from LON-DC1. You need to assign VirtualiSCSI2.vhd a logical unit value of 0.What should you do?

A. Modify the properties of the VirtualiSCSI2.vhd iSCSI virtual disk.B. Run the Add-IscsiVirtualDiskTargetMapping cmdlet and specify the -Lun parameter.C. Run the iscsicli command and specify the reportluns parameter.D. Run the iscsicpl command and specify the virtualdisklun parameter.


Explanation/Reference:Explanation:http://technet.microsoft.com/en-us/library/jj612800(v=wps.620).aspx

QUESTION 28Your network contains an Active Directory forest named contoso.com. The forest contains a

single domain. The forest contains three Active Directory sites named SiteA, SiteB, and SiteC. The sitescontain four domain controllers. The domain controllers are configured as shown in the following table.

An IP site link exits between each site. You discover that the users in SiteC are authenticated by the domaincontrollers in SiteA and SiteB. You need to ensure that the SiteC users are authenticated by the domaincontrollers in SiteB, unless all of the domain controllers in SiteB are unavailable. What should you do?

A. Create a site link bridge.B. Create additional connection objects for DC3 and DC4.C. Create additional connection objects for DC1 and DC2.D. Increase the cost of the site link between SiteA and SiteC.


Explanation/Reference:Explanation:http://technet.microsoft.com/en-us/library/dd277430.aspx#XSLTsection126121120120

QUESTION 29You have a file server named Server1 that runs Windows Server 2012. The folders on Server1 are configuredas shown in the following table.

A new corporate policy states that backups must use Windows Azure Online Backup whenever possible. Youneed to identify which technology you must use to back up Server1. The solution must use Windows AzureOnline Backup whenever possible. What should you identify? To answer, drag the appropriate backup type tothe correct location or locations. Each backup type may be used once, more than once, or not at all. You mayneed to drag the split bar between panes or scroll to view content.

A.B.C.D.



QUESTION 30You have a server named File1 that runs Windows Server 2012. File1 has the File Server role service installed.You plan to back up all shared folders by using Windows Azure Online Backup. You download and install theWindows Azure Online Backup Service Agent on File1. You need to ensure that you use Windows ServerBackup to back up data to Windows Azure Online Backup.What should you do?

A. From Computer Management, add the File1 computer account to the Backup Operators group.B. From the Services console, modify the Log On settings of the Windows Azure Online Backup Service

Agent.C. From Windows Server Backup, run the Register Server Wizard.D. From a command prompt, run wbadmin.exe enable backup.


Explanation/Reference:Explanation:http://blogs.technet.com/b/windowsserver/archive/2012/03/28/microsoft-online- backupservice.aspx


A. Authorization ManagerB. TPM ManagementC. Active Directory Sites and ServicesD. Services



QUESTION 32

Your network contains an Active Directory domain named contoso.com. The domain contains a main office anda branch office. An Active Directory site exists for each office. All domain controllers run Windows Server 2012.The domain contains two domain controllers. The domain controllers are configured as shown in the followingtable.

DC1 hosts an Active Directory-integrated zone for contoso.com. You add the DNS Server server role to DC2.You discover that the contoso.com DNS zone fails to replicate to DC2. You verify that the domain, schema, andconfiguration naming contexts replicate from DC1 to DC2. You need to ensure that DC2 replicates thecontoso.com zone by using Active Directory replication.Which tool should you use?

A. NtdsutilB. RepadminC. DnslintD. Active Directory Domains and Trusts


Explanation/Reference:Explanation:If you see question about AD Replication, First preference is AD sites and services, then Repadmin and thenDNSLINT.

QUESTION 33You have a server named Server1 that runs Windows Server 2012. Windows Server 2012 is installed onvolume C. You need to ensure that Safe Mode with Networking loads the next time Server1 restarts. Which toolshould you use?

A. The Msconfig commandB. The Restart-Server cmdletC. The Restart-Computer cmdletD. The Bootcfg command


Explanation/Reference:Explanation:A. Use system config to configure boot optionsB. Not a valid cmdlet

C. Restarts ("reboots") the operating system on local and remote computers. No boot options D. modifies theBoot.ini file no option for safe mode/networking for win8/2012 http://technet.microsoft.com/en-us/library/hh849837.aspx http://support.microsoft.com/kb/317521 http://technet.microsoft.com/en-us/library/cc725967.aspx

QUESTION 34You have a file server named FS1 that runs Windows Server 8. Data Deduplication is enabled on FS1. Youneed to configure Data Deduplication to run at a normal priority from 20:00 to 06:00 daily. What should youconfigure?

A. File and Storage Services in Server ManagerB. The Data Deduplication process in Task ManagerC. Disk Management in Computer ManagementD. The properties of drive C


Explanation/Reference:Explanation:A. In Windows Server 2012, deduplication can be enabled locally or remotely by using Windows PowerShell orServer Manager.http://technet.microsoft.com/en-us/library/hh831700.aspx

QUESTION 35Your network contains an Active Directory domain named contoso.com. All client computers run Windows 8Enterprise. You have a remote site that only contains client computers. All of the client computer accounts arelocated in an organizational unit (CU) named Remote1. A Group Policy object (GPO) named GPO1 is linked tothe Remote1 CU. You need to configure BranchCache for the remote site. Which two settings should youconfigure in GPO1? To answer, select the two appropriate settings in the answer area.

A.B.C.D.



QUESTION 36Your company has a main office and a branch office. An Active Directory site exists for each office. Thenetwork contains an Active Directory forest named contoso.com. The contoso.com domain contains threemember servers named Server1, Server2, and Server3. All servers run Windows Server 2012. In the mainoffice, you configure Server1 as a file server that uses BranchCache. In the branch office, you configureServer2 and Server3 as BranchCache hosted cache servers. You are creating a Group Policy for the branchoffice site. In the branch office, you need to configure the client computers that run Windows B to use Server2and Server3 as BranchCache.

A.B.

C.D.



QUESTION 37Your network contains two Active Directory forests named contoso.com and fabrikam.com. A two- way foresttrust exists between the forests. The contoso.com forest contains an enterprise certification authority (CA)named CAl. You implement cross-forest certificate enrollment between the contoso.com forest and thefabrikam.com forest. On CA1, you create a new certificate template named Template1. You need to ensurethat users in the fabrikam.com forest can request certificates that are based on Template1. Which tool shouldyou use?

A. Sync-ADObjectB. Pkiview.mscC. CertificateServices.ps1D. CertutilE. PKISync.ps1


Explanation/Reference:Explanation:A. Replicates a single object between any two domain controllers that have partitions in common. B. Monitoringand troubleshooting the health of all certification authorities (CAs) in a public key infrastructure (PKI) are

essential administrative tasks facilitated by the Enterprise PKI snap-in. D. use Certutil.exe to dump and displaycertification authority (CA) configuration information, configure Certificate Services, backup and restore CAcomponents, and verify certificates, key pairs, and certificate chains.E. PKISync.ps1 copies objects in the source forest to the target forest http://technet.microsoft.com/en-us/library/hh852296.aspxhttp://technet.microsoft.com/en-us/library/cc732261(v=ws.10).aspx http://technet.microsoft.com/en-us/library/ff955845(v=ws.10).aspx

QUESTION 38Your network contains an Active Directory domain named contoso.com. The domain contains an enterprisecertification authority (CA). The domain contains a server named Server1 that runs Windows Server 2012. Youinstall the Active Directory Federation Services server role on Server1. You plan to configure Server1 as anActive Directory Federation Services (AD FS) server. The Federation Service name will be set toadfs1.contoso.com. You need to identify which type of certificate template you must use to request a certificatefor AD FS.

A.B.C.D.



QUESTION 39Your network contains an Active Directory domain named contoso.com. A previous administrator implementeda Proof of Concept installation of Active Directory Rights Management Services (AD RMS). After the proof ofconcept was complete, the Active Directory Rights Management Services server role was removed. Youattempt to deploy AD RMS. During the configuration of AD RMS, you receive an error message indicating thatan existing AD RMS Service Connection Point (SCP) was found. You need to remove the existing AD RMSSCP.

A. Certification AuthorityB. Authorization ManagerC. ADSI EditD. Active Directory Domains and Trusts



QUESTION 40Your network contains an Active Directory domain named contoso.com. The domain contains a server namedServer1 that runs Windows Server 2012. Server1 has the Active Directory Certificate Services server roleinstalled and is configured as an enterprise certification authority (CA). You need to ensure that all of the usersin the domain are issued a certificate that can be used for the following purposes:

- Email security- Client authentication- Encrypting File System (EFS)

Which two actions should you perform? (Each correct answer presents part of the solution.Choose two.)

A. From a Group Policy, configure the Certificate Services Client ?Auto-Enrollment settings.B. From a Group Policy, configure the Certificate Services Client ?Certificate Enrollment Policy settings.C. Modify the properties of the User certificate template, and then publish the template.

D. Duplicate the User certificate template, and then publish the template.E. From a Group Policy, configure the Automatic Certificate Request Settings settings.


Explanation/Reference:Explanation:The default user template supports all of the requirements EXCEPT auto enroll as shown below:

However a duplicated template from users has the ability to autoenroll:

The Automatic Certificate Request Settings GPO setting is only available to Computer, not user.http://technet.microsoft.com/en-us/library/dd851772.aspx

QUESTION 41Your network contains an Active Directory domain named contoso.com. The domain contains two ActiveDirectory sites named Site1 and Site2. You need to configure the replication between the sites to occur by usingchange notification. Which attribute should you modify?

A.B.C.D.




DC1 hosts an Active Directory-integrated zone for contoso.com. You add the DNS Server server role to DC2.You discover that the contoso.com DNS zone fails to replicate to DC2. You verify that the domain, schema, andconfiguration naming contexts replicate from DC1 to DC2. You need to ensure that DC2 replicates thecontoso.com zone by using Active Directory replication.Which tool should you use?

A. DnslintB. A DNS ManagerC. Active Directory Users and ComputersD. Dnscmd


Explanation/Reference:Explanation:http://support.microsoft.com/kb/321045/

QUESTION 43Your network contains an Active Directory forest named adatum.com. The forest contains a single domain. Thedomain contains four servers. The servers are configured as shown in the following table.

You need to update the schema to support a domain controller that will run Windows Server

2012.On which server should you run adprep.exe?

A. Server1B. DC3C. DC2D. DC1


Explanation/Reference:Explanation:C. DC3 is the only server that could be assumed to be 64bit http://technet.microsoft.com/en- us/library/dd464018(v=ws.10).aspx#BKMK_WS2012

QUESTION 44Your network contains an Active Directory domain named contoso.com. The domain contains domaincontrollers that run either Windows Server 2003, Windows Server 2008 R2, or Windows Server 2012. You planto implement a new Active Directory forest. The new forest will be used for testing and will be isolated from theproduction network. In the test network, you deploy a server named Server1 that runs Windows Server 2012.You need to configure Server1 as a new domain controller in a new forest named contoso.test. The solutionmust meet the following.

Select two options below.

A. There is no need to set the Forest Functional Level.B. Set Forest Functional Level to Windows 2003.C. Set Forest Functional Level to Windows 2008D. Set Forest Functional Level to Windows 2008 R2.E. Set Forest Functional Level to Windows 2012.


F. There is no need to set the Domain Functional Level.G. Set Domain Functional Level to Windows 2003.H. Set Domain Functional Level to Windows 2008I. Set Domain Functional Level to Windows 2008 R2.J. Set Domain Functional Level to Windows 2012.

Correct Answer: BGSection: (none)Explanation

Explanation/Reference:Explanation:When you deploy AD DS, set the domain and forest functional levels to the highest value that your environmentcan support. This way, you can use as many AD DS features as possible. For example, if you are sure that youwill never add domain controllers that run Windows Server 2003 to the domain or forest, select the WindowsServer 2008 functional level during the deployment process. However, if you might retain or add domaincontrollers that run Windows Server 2003, select the Windows Server 2003 functional level. When you deploy anew forest, you are prompted to set the forest functional level and then set the domain functional level. Youcannot set the domain functional level to a value that is lower than the forest functional level. Reference:Understanding Active Directory Domain Services (AD DS) Functional Levels

REWORDEDVery smartly reworded that you need to configure server 1 as new DC in a new forest named contoso.test and"also do name resolution". In the answer you will have to select Windows 2003 as domain and forest functionallevel and you should also check "Domain name system(DNS) server....This is not in any dumps* When you deploy AD DS, set the domain and forest functional levels to the highest value that yourenvironment can support. This way, you can use as many AD DS features as possible. For example, if you aresure that you will never add domain controllers that run Windows Server 2003 to the domain or forest, selectthe Windows Server 2008 functional level during the deployment process. However, if you might retain or adddomain controllers that run Windows Server 2003, select the Windows Server 2003 functional level. When youdeploy a new forest, you are prompted to set the forest functional level and then set the domain functional level.You cannot set the domain functional level to a value that is lower than the forest functional level. http://technet.microsoft.com/en-us/library/understanding-active-directory- functionallevels(v=ws.10).aspx

QUESTION 45Your network contains an Active Directory domain named contoso.com. Domain controllers run either WindowsServer 2008, Windows Server 2008 R2, or Windows Server 2012. You have a Password Settings object(PSOs) named PSO1. You need to view the settings of PSO1. Which tool should you use?

A. Get-ADDomainControllerPasswordReplicationPolicyB. Get-ADDefaultDomainPasswordPolicyC. Server ManagerD. Get-ADFineGrainedPasswordPolicy


Explanation/Reference:Explanation:A. Gets the members of the allowed list or denied list of a read-only domain controller's password replicationpolicyB. Gets the default password policy for an Active Directory domain.C. PSO's managed from AD AC or Powershell OnlyD. Gets one or more Active Directory fine grained password policies.

http://technet.microsoft.com/en-us/library/ee617207.aspxhttp://technet.microsoft.com/en-us/library/ee617244.aspxhttp://technet.microsoft.com/en-us/library/ee617231.aspx

QUESTION 46Your network contains an Active Directory domain named contoso.com. The domain contains two serversnamed Server1 and Server2. Both servers have the IP Address Management (IPAM) Server feature installed.You have a support technician named Tech1. Tech1 is a member of the IPAM Administrators group on Server1and Server2. You need to ensure that Tech1 can use Server Manager on Server1 to manage IPAM on Server2.To which group on Server2 should you add Tech1? To answer, select the appropriate group in the answer area.

A.B.C.D.



Explanation:http://www.microsoft.com/en-us/download/dlx/ThankYou.aspx?id=29012

Both WinRMRemoteWMIUsers_ and Remote Management Users have the exact same description. As such, Itested connecting with server manager remotely with a non-administrative account. I tried before adding toeither group and got this error:

I then added to Remote Management Users and got this error:


Note that this is due to access to the event log only.

Next I removed from Remote Management Users and added to WinRMRemoteWMIUsers_ and got this error:

The error is exactly the same and the explanation is due to event log. In summary, Either one of these answersis correct, however since the document explicitly says use the "WinRMRemoteWMIUsers_" group, then that'swhat we got to do.

QUESTION 47You have a server named Server2 that runs Windows Server 2012. You have storage provisioned on Server2as shown in the exhibit. (Click the Exhibit button.) You need to configure the storage so that it appears inWindows Explorer as a drive letter on Server1. Which three actions should you perform in sequence? Toanswer, move the three appropriate actions from the list of actions to the answer area and arrange them in thecorrect order.

A.B.C.D.



QUESTION 48Your network contains an Active Directory domain named contoso.com. The domain contains two serversnamed Server1 and Server2 Both servers have the IP Address Management (IPAM) Server feature installed.You have a support technician named Tech1. Tech1 is a member of the IPAM Administrators group on Server1and Server2. You need to ensure that Tech1 can use Server Manager on Server1 to manage IPAM on Server2.To which group on Server2 should you add Tech1.

A. IPAM MSM AdministratorsB. IPAM AdministratorsC. winRMRemoteWMIUsers_D. Remote Management Users


Explanation/Reference:Explanation:A. IPAM MSM Administrators can't access remotelyB. IPAM Administrators can't access remotely

C. If you are accessing the IPAM server remotely using Server Manager IPAM client RSAT, then you must be amember of the WinRMRemoteWMIUsers group on the IPAM server, in addition to being a member of theappropriate IPAM security group (or local Administrators group). http://msdn.microsoft.com/en-us/library/windows/desktop/aa384295(v=vs.85).aspx http://www.microsoft.com/en-us/download/details.aspx?id=29012

QUESTION 49Your network contains two Active Directory forests named contoso.com and adatum.com. Both forests containmultiple domains. All domain controllers run Windows Server 2012. Contoso.com has a one-way forest trust toadatum.com. A domain named paris.eu.contoso.com hosts several legacy applications that use NTLMauthentication. Users in a domain named london.europe.adatum.com report that it takes a long time to beauthenticated when they attempt to access the legacy applications hosted in paris.eu.contoso.com. You need toreduce how long it takes for the london.europe.adatum.com users to be authenticated in paris.eu.contoso.com.What should you do?

A. Create a shortcut trust.B. Create an external trust between the forest root domains.C. Disable SID filtering on the existing trust.D. Create an external trust.


Explanation/Reference:Explanation:A. Shortcut trusts are one-way or two-way, transitive trusts that can be used when administrators need tooptimize the authentication process. Authentication requests must first travel a trust path between domaintrees, and in a complex forest this can take time, which can be reduced with shortcut trusts.B. Use external trusts to provide access to resources located on a Windows NT 4.0 domain or a domainlocated in a separate forest that is not joined by a forest trust.C. Filters users or SIDs from one domainD. Use external trusts to provide access to resources located on a Windows NT 4.0 domain or a domainlocated in a separate forest that is not joined by a forest trust http://technet.microsoft.com/en-us/library/cc737939(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc775736(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc772633(v=ws.10).aspx

QUESTION 50Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012.You are creating a central access rule named TestFinance that will be used to audit members of theAuthenticated Users group for access failure to shared folders in the finance department. You need to ensurethat access requests are unaffected when the rule is published.What should you do?

A. Add a User condition to the current permissions entry for the Authenticated Users principal.B. Set the Permissions to Use the following permissions as proposed permissions.C. Add a Resource condition to the current permissions entry for the Authenticated Users principal.D. Set the Permissions to Use following permissions as current permissions.


Explanation/Reference:Explanation:http://technet.microsoft.com/en-us/library/jj134043.aspx

Exam C

QUESTION 1You have a server named Server1 that runs Windows Server 2012. Windows Server 2012 is installed onvolume C. You need to ensure that Safe Mode with Command Prompt loads the next time Server1 restarts.Which tool should you use?

A. The Restart-Server cmdletB. The Bootcfg commandC. The Restart-Computer cmdletD. The Bcdedit command


Explanation/Reference:Explanation:A. Restart-Server is not a CMDLETB. modifies the Boot.ini fileC. Restarts computerD. Boot Configuration Data (BCD) files provide a store that is used to describe boot applications and bootapplication settings.http://support.microsoft.com/kb/317521http://technet.microsoft.com/en-us/library/hh849837.aspx http://technet.microsoft.com/en- us/library/cc731662(v=ws.10).aspx

You can see with msconfig tool that boot options have changed as follows:NOTE: Alternate Shell may be used

After reboot you should remove the safeboot option using bcdedit:- bcdedit /deletevalue safeboot

QUESTION 2You have a server named Server1 that runs a Server Core Installation of Windows Server 2012. Shadowscopies are enabled on all volumes. You need to delete a specific shadow copy. The solution must minimizeserver downtime. Which tool should you use?

A. VssadminB. DiskpartC. WbadminD. Shadow


Explanation/Reference:Explanation:http://technet.microsoft.com/en-us/library/cc788026(v=ws.10).aspx

QUESTION 3Your network contains two Web servers named Server1 and Server2. Server1 and Server2 are nodes in aNetwork Load Balancing (NLB) cluster. You configure the nodes to use the port rule shown in the exhibit. (Clickthe Exhibit button.)

You need to configure the NLB cluster to meet the following requirements:

- HTTPS connections must be directed to Server1 if Server1 is available.- HTTP connections must be load balanced between the two nodes.

Which three actions should you perform? (Each correct answer presents part of the solution.Choose three.)

A. From the host properties of Server1, set the Handling priority of the existing port rule to 2.B. From the host properties of Server1, set the Handling priority of the existing port rule to 1.C. From the host properties of Server2, set the Priority (Unique host ID) value to 1.D. Create a port rule for TCP port 80. Set the Filtering mode to Multiple host and set the Affinity to None.E. From the host properties of Server2, set the Handling priority of the existing port rule to 2.F. Create an additional port rule for TCP port 443. Set the Filtering mode to Multiple host and set the Affinity to

Single.

Correct Answer: BDESection: (none)Explanation

Explanation/Reference:Explanation:Handling priority: When Single host filtering mode is being used, this parameter specifies the local host's priorityfor handling the networking traffic for the associated port rule. The host with the highest handling priority (lowest

numerical value) for this rule among the current members of the


cluster will handle all of the traffic for this rule. The allowed values range from 1, the highest priority, to themaximum number of hosts allowed (32). This value must be unique for all hosts in the cluster.E (not C): Lower priority (2) for Server 2.D: HTTP is port 80.Multiple hosts. This parameter specifies that multiple hosts in the cluster handle network traffic for theassociated port rule. This filtering mode provides scaled performance in addition to fault tolerance bydistributing the network load among multiple hosts. You can specify that the load be equally distributed amongthe hosts or that each host handle a specified load weight. Reference:Network Load Balancing parameters

QUESTION 4Your network contains two Active Directory forests named contoso.com and litwareinc.com. A two- way foresttrusts exists between the forest. Selective authentication is enabled on the trust. The contoso.com forestcontains a server named Server1. You need to ensure that users in litwareinc.com can access resources onServer1. What should you do?

A. Install Active Directory Rights Management Services on a domain controller in contoso.com.B. Modify the permission on the Server1 computer account.C. Install Active Directory Rights Management Services on a domain controller in litwareinc.com.D. Configure SID filtering on the trust.



QUESTION 5Your network contains an Active Directory domain named contoso.com. The domain contains two memberservers named Server1 and Server2. All servers run Windows Server 2012. Server1 and Server2 have theFailover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1.

You add two additional nodes to Cluster1. You have a folder named Folder1 on Server1 that containsapplication data. You plan to provide continuously available access to Folder1. You need to ensure that all ofthe nodes in Cluster1 can actively

respond to the client requests for Folder1. What should you configure?


Correct Answer: LSection: (none)Explanation

Explanation/Reference:Explanation:http://technet.microsoft.com/en-us/library/hh831349.aspxScale-Out File Server for application data (Scale-Out File Server) This clustered file server is introduced inWindows Server 2012 and lets you store server application data, such as Hyper-V virtual machine files, on fileshares, and obtain a similar level of reliability, availability, manageability, and high performance that you wouldexpect from a storage area network. All file shares are online on all nodes simultaneously. File sharesassociated with this type of clustered file server are called scale-out file shares. This is sometimes referred toas active-active.

QUESTION 6Information and details provided in a question apply only to that question. Your network contains an ActiveDirectory domain named contoso.com. The domain contains two member servers named Server1 and Server2.All servers run Windows Server 2012. Server1 and Server2 have the Network Load Balancing (NLB) featureinstalled. The servers are configured as nodes in an NLB cluster named Cluster1. Cluster1 hosts a secure webapplication named WebApp1. WebApp1 saves user state information locally on each node. You need to ensurethat when users connect to WebApp1, their session state is maintained. What should you configure?

A. Affinity-NoneB. Affinity-SingleC. The cluster quorum settingsD. The failover settings

E. A file server for general useF. The Handling priorityG. The host priorityH. Live migrationI. The possible ownerJ. The preferred ownerK. Quick migration

L. the Scale-Out File Server


Explanation/Reference:Explanation:http://technet.microsoft.com/en-us/library/bb687542.aspx


A. ADSI EditB. Active Directory Users and ComputersC. Active Directory Domains and TrustsD. Active Directory Sites and ServicesE. ServicesF. Authorization ManagerG. TPM ManagementH. Certification Authority



QUESTION 8

Your network contains an Active Directory forest. The forest contains two domains named contoso.com andfabrikam.com. The functional level of the forest is Windows Server 2003. You have a domain outside the forestnamed adatum.com. You need to configure an access solution to meet the following requirements:




A. a one-way realm trust from contoso.com to adatum.comB. a one-way realm trust from adatum.com to contoso.comC. a one-way external trust from contoso.com to adatum.comD. a one-way external trust from adatum.com to contoso.com



QUESTION 9Your network contains an Active Directory domain named contoso.com. All file servers in the domain runWindows Server 2012. The computer accounts of the file servers are in an organizational unit (OU) namedOU1. A Group Policy object (GPO) named GPO1 is linked to OU1. You plan to modify the NTFS permissionsfor many folders on the file servers by using central access policies. You need to identify any users who will bedenied access to resources that they can currently access once the new permissions are implemented. Inwhich order should you Perform the five actions?

A.B.C.D.



Explanation:

I hate steps like this because you can create a rule first and then the policy, or you can create the policy andcreate the rule during the creation of the policy. Either way I'm going to go with creating the policy first, and thenthe rule.

QUESTION 10You have a file server named Server1 that runs Windows Server 2012. Data Deduplication is

enabled on drive D of Server1. You need to exclude D:\Folder1 from Data Deduplication. What should youconfigure?

A. Disk Management in Computer ManagementB. File and Storage Services in Server ManagerC. the classification rules in File Server Resource Manager (FSRM)D. the properties of D:\Folder1


Explanation/Reference:Explanation:B. Data deduplication exclusion on a Volume are set from File & Storage Services, Server Manager orPowerShellhttp://technet.microsoft.com/en-us/library/hh831434.aspx

QUESTION 11You manage an environment that has many servers. The servers run Windows Server 2012 and use iSCSIstorage. Administrators report that it is difficult to locate available iSCSI resources on the network. You need to

ensure that the administrators can locate iSCSI resources on the network by using a central repository. Whichfeature should you deploy?

A. The iSCSI Target Server role serviceB. The iSNS Server service featureC. The Windows Standards-Based Storage Management featureD. The iSCSI Target Storage Provider feature


Explanation/Reference:Explanation:A. iSNS facilitates automated discovery, management, and configuration of iSCSI and Fibre Channel devices(using iFCP gateways) on a TCP/IP network. C. Windows Server 2012 enables storage management that iscomprehensive and fully scriptable, and administrators can manage it remotelyD. iSCSI Target Server enables you to network boot multiple computers from a single operating system imagethat is stored in a centralized locationhttp://technet.microsoft.com/en-us/library/cc772568.aspxhttp://technet.microsoft.com/en-us/library/hh831751.aspx http://technet.microsoft.com/en- us/library/dn305893.aspx

QUESTION 12Your network contains an Active Directory domain named contoso.com. The network contains a file servernamed Server1 that runs Windows Server 2012. You create a folder named Folder1. You share Folder1 asShare1. The NTFS permissions on Folder1 are shown in the Folder1 exhibit. (Click the Exhibit button.)

The Everyone group has the Full control Share permission to Folder1. You configure a central access policy asshown in the Central Access Policy exhibit. (Click the Exhibit button.)


Members of the IT group report that they cannot modify the files in Folder1. You need to ensure that the ITgroup members can modify the files in Folder1. The solution must use central access policies to control thepermissions. Which two actions should you perform? (Each correct answer presents part of the solution.Choose two.)

A. On the Classification tab of Folder1, set the classification to Information Technology.B. On the Security tab of Folder1, add a conditional expression to the existing permission entry for the IT

group.C. On Share1, assign the Change Share permission to the IT group.D. On the Security tab of Folder1, remove the permission entry for the IT group.E. On the Security tab of Folder1, assign the Modify permission to the Authenticated Users group.

Correct Answer: AESection: (none)Explanation

Explanation/Reference:Explanation:Central access policies for files enable organizations to centrally deploy and manage authorization policies thatinclude conditional expressions that use user groups, user claims, device claims, and resource properties.(Claims are assertions about the attributes of the object with which they are associated). For example, toaccess high-business-impact (HBI) data, a user must be a full-time employee, obtain access from a manageddevice, and log on with a smart card. These policies are defined and hosted in Active Directory DomainServices (AD DS). http://technet.microsoft.com/en- us/library/hh846167.aspx



QUESTION 13You have a server named File1 that runs Windows Server 2012. Fuel has the File Server role service installed.You plan to back up all shared folders by using Microsoft Online Backup. You download and install theMicrosoft Online Backup Service Agent on File1. You need to ensure that you use Windows Server Backup toback up data to Microsoft Online Backup. What should you do?

A. From Computer Management, add the File1 computer account to the Backup Operators group.B. From Windows Server Backup, run the Register Server Wizard.C. From a command prompt, run wbadmin.exe enable backup.D. From the Services console, modify the Log On settings of the Microsoft Online Backup Service Agent.


Explanation/Reference:Explanation:A. Enables you to back up and restore your operating system, volumes, files, folders, and applications from acommand prompt.B. To register a server for use with Windows Azure Backup you must run the register server wizard

http://technet.microsoft.com/en-us/library/hh831677.aspx

QUESTION 14Your network contains an Active Directory domain named contoso.com. You are creating a custom WindowsRecovery Environment (Windows RE) image. You need to ensure that when a server starts from the customWindows RE image, a drive is mapped automatically to a network share. What should you modify in the image?

A. startnet.cmdB. Xsl-mApp1ngs.xmlC. Win.iniD. smb.types.ps1xml


Explanation/Reference:Explanation:The best way to define what to start is using starnet.cmd http://technet.microsoft.com/en- us/library/cc766521(v=ws.10).aspx

QUESTION 15You have a file server named Server1 that runs a Server Core Installation of Windows Server 2012. You needto ensure that users can access previous versions of files that are shared on Server1 by using the PreviousVersions tab. Which tool should you use?

A. DiskpartB. WbadminC. VssadminD. Storrept


Explanation/Reference:Explanation:A. Enables you to back up and restore your operating system, volumes, files, folders, and applications from acommand prompt.B. DiskPart is a text-mode command interpreter that enables you to manage objects (disks, partitions, volumes,or virtual hard disks) by using scripts or direct input from a command prompt. C. The storrept command isinstalled with File Server Resource Manager and includes subcommands for creating and managing storagereports and storage report tasks, as well as for configuring general administrative options for File ServerResource Manager. D. Displays current volume shadow copy backups and all installed shadow copy writers

and providers. To view the command syntax for any of the commands in the following table, click the commandname. http://technet.microsoft.com/en-us/library/cc754015(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc770877(v=ws.10).aspx

http://technet.microsoft.com/en-us/library/cc753567(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc754968.aspx

QUESTION 16Your company has a main office and a branch office. The main office contains a file server named Server1.Server1 has the BranchCache for Network Files role service installed. The branch office contains a servernamed Server2. Server2 is configured as a BranchCache hosted cache server. You need to preload the datafrom the file shares on Server1 to the cache on Server2. You generate hashes for the file shares on Server1.Which cmdlet should you run next?

A. Add-BCDataCacheExtensionB. Set-BCCacheC. Publish-BCFileContentD. Export-BCCachePackage


Explanation/Reference:Explanation:A. increases the amount of cache storage space that is available on a hosted cache server by adding a newcache file.B. Modifies the cache file configuration.C. Generates hashes, also called content information, for files in shared folders on a file server that haveBranchCache enabled and the BranchCache for Network Files role service installed.D. Exports a cache packagehttp://technet.microsoft.com/en-us/library/hh848405.aspx http://technet.microsoft.com/en- us/library/hh848413.aspx http://technet.microsoft.com/en-us/library/hh848412.aspx http://technet.microsoft.com/en-us/library/hh848409.aspx http://technet.microsoft.com/fr- fr/library/jj572970.aspx

QUESTION 17Your network contains an Active Directory domain named contoso.com. The domain contains a main office anda branch office. An Active Directory site exists for each office. The domain contains two servers named Server1and Server2 that run Windows Server 2012. Both servers have the DHCP Server server role installed. Server1is located in the main office site. Server2 is located in the branch office site. Server1 provides IPv4 addressesto the client computers in the main office site. Server2 provides IPv4 addresses to the client computers in thebranch office site. You need to ensure that if either Server1 or Server2 are offline, the client computers can stillobtain IPv4 addresses.The solution must meet the following requirements:

- The storage location of the DHCP databases must not be a single point of failure.- Server1 must provide IPv4 addresses to the client computers in the branch office site only if Server2 is offline.- Server2 must provide IPv4 addresses to the client computers in the main office site only if Server1 is offline.

Which configuration should you use?

A. load sharing mode failover partnersB. a failover clusterC. hot standby mode failover partnersD. a Network Load Balancing (NLB) cluster



QUESTION 18Your company has a main office and a branch office. The main office is located in Detroit. The branch office islocated in Seattle. The network contains an Active Directory domain named adatum.com. Client computers runeither Windows 7 Enterprise or Windows 8 Enterprise. The main office contains 1,000 client computers and 50

servers. The branch office contains 20 client computers. All computer accounts for the branch office arelocated in an organizational unit (OU) named SeattleComputers. A Group Policy object (GPO) named GPO1 islinked to the SeattleComputers OU. You need to configure BranchCache for the branch office.

A.B.C.D.



QUESTION 19You have a server named Server 1 that runs Windows Server 2012. Server1 has five network adapters. Threeof the network adapters are connected to a network named LAN1. The two other network adapters areconnected to a network named LAN2. You create a network adapter team named Team1 from two of theadapters connected to LAN1. You create a network adapter team named Team2 from the two adaptersconnected to LAN2. A company policy states that all server IP addresses must be assigned by using a reserved

address in DHCP. You need to identify how many DHCP reservations you must create for Server1. How manyreservations should you identify?

A. 2B. 3

C. 5D. 7


Explanation/Reference:Explanation:3 adapter on LAN 12 adapters on LAN 22 adapters on LAN 1 used in a team, so that's 3 - 2 leaving 1. 2 adapaters on LAN 2 used in a team, so that's 2- 2 leaving 0. 1 team on LAN 1 + 1 team on LAN 2 + remaining adapter on LAN 1 = 3.

QUESTION 20Your network contains an Active Directory domain named contoso.com. The domain contains a server namedServer1 that runs Windows Server 2012. Server1 has the IP Address Management (IPAM) Server featureinstalled. IPAM is configured currently for Group Policy-based provisioning. You need to change the IPAMprovisioning method on Server1. What should you do?

A. Run the ipamgc.exe command.B. Run the Set-IPAMConfiguration cmdlet.C. Reinstall the IP Address Management (IPAM) Server feature.D. Delete IPAM Group Policy objects (GPOs) from the domain.


Explanation/Reference:Explanation:You cannot change the provisioning method after completing the initial setup.

QUESTION 21you are employee as a network administrator at abc.com. ABC.com has an active directory domain named

ABC.com All servers on the abc.com network have windows server 2012 installed and all workstations havewindows 8 enterprise installed. ABC.com has established a remote Active directory site that only hostworkstations.The Computer accounts for these workstations have been placed in an organizational unit(OU),named ABCADRemote,which has a group policy object(GPO) associated with it. You are in the process ofconfiguration Branchcahce for the remote Active directory site. You have Already turned Branchcache on.Which of the following actions should you take next_?

A. You Should consider having the set Branchcache HostedServer Cache mode setting configured "First Test,First Pass" - www.lead2pass.com 117Microsoft 70-412 Exam

B. You Should consider having the set Branchcache Hostedclient Cache mode settting configuredC. You Should consider having the set Branchcache distributed cache mode setting configuredD. You should consider having the set BranchCache disabled cache mode settings configured



QUESTION 22You are employed as a network administrator at ABC.com. ABC.com has an active directory domain namedABC.com. ALL servers on the ABC.com network have windows server 2012. ABC.com has a server,namedserver 1, which runs the windows deployment services server role. You make use of windows server backup toback up server 1. Subsequent to a disk array on server 1 becoming corrupt,you swap the disk array with newhardware. You now need to recover server1 in the shortest time conceivable.Which of the following actions should you take?

A. you should consider making use of the windows server 2012 installation media to start server1B. you should consider restoring server1 from a snapshot backupC. you should consider restoring server 1 from an incremental backupD. you should consider restoring server 1 from a differential backup



QUESTION 23You are employed as a senior network administrator at ABC.com. ABC.com has an active directory domainnamed ABC.com. all servers on the abc.com network windows server2012 installed. You are currently runninga training exercise for junior network administrators.You are discussing the PKISync.ps1 tool.Which of the following is true with regards to The PKISync.ps1?

A. it adds a certificate template to the CAB. it asssists administrators in diagnosing replication problems between windows domain controllersC. it is used to display information about the digital certificates that are installed on a directAccess client,

DirectAcces server,or intranet resourceD. it copies objects in the source forest to the target forest.


Explanation


QUESTION 24You are employed as a network administrator ABC.com.ABC.com has an active directory domain named ABC.com. All servers on the ABC.com network have windowsserver 2012 installed. ABC.com has a server named server1 which is configured as a DHCP server.You have created a superscope on server1.Which of the following describes reason for creating a superscope?(choose all that apply.)

A. To support DHCP clients on a single physical network segment where multiple logical ip networks are used.B. To allow for the sending of network traffic to a group of endpoints destination hosts.C. To support remote DHCP clients located on the far side of DHCP and BOOTP relay agents.D. To provide fault tolerance



QUESTION 25You are employed as a network administrator at ABC.com. ABC.com has an active directory domain namedABC.com all servers including domain controllers on the ABC.com network have windows server 2012installed. ABC.com has its headquarters in London and an office in paris. The London Office has a domaincontroller named server1,which is configured as a writeable domain controller that servers as a Global catalogserver and a DNS server. Server1 is configured to host an Active Directory-integrated zone for ABC.comThe Paris office has a Read-Only domain controller (RODC) named server2 which servers as a Global catalogserver. After installing the DNS server role on server2, you want to make sure that the ABC.com zone isreplicated to server2 via active directory replication.Which of the following actions should you take?

A. You should consider making use of Active Directory Sites and Services to Configured replicationB. You should consider making use of replmon.exe to configure replication.C. You should consider making use of repadmin.exe to configure replicationD. You should consider making use of Active Directory Schema To configure replication



QUESTION 26You are employed as a network administrator at ABC.com. ABC.com has an Active Directory domain named.Abc.com all servers on the ABC.com network have windows server 2012. You are running a training exercisefor junior network administrators.You are currently discussing DHCP failover architecture.You have informed the trainees that DHCP servers can be deployed as fail over partners in either hot standbymode or load sharing mode.Which of the following is TRUE with regards to hot standby mode? (Choose all that apply)

A. It is when two servers function in a fail over relationship where an active server is responsible for leasing IPaddress and configuration data to all clients in a scope or subnet

B. It when two servers in a fail over relationship server IP addresses and options to clients on a given subnet atthe same time

C. It is best suited to deployments where a data center server acts as a standby backup server to a server at aremote site

D. It is best suited deployments where both servers in a fail over relationship are located at the same physicalsite


Explanation/Reference:Explanation:http://blogs.technet.com/b/teamdhcp/archive/2012/09/03/dhcp-failove r-hot-standby-mode.aspx

QUESTION 27You are emloyed as a network administrator at ABC.com Abc.com has an Active directory domain namedABC.com all servers on the ABC.com network have windows server 2012. The ABC.com domain has twoActive Directory sites configured.You want to make use of change notification configure replication between these Active Directory Sites.Youhave opened DEFAULTIPSITELINK Properties to configure the necessary attribute. Which of the following isthe attribute that needs to be configured?

A. The revisiobn attributeB. The Options attributeC. The schedule attributeD. The proxyAddresses attribute



QUESTION 28You are employed as a network administrator at ABC.com. ABC.com has an Active Directory domain namedABC.com all servers on the ABC.com network have Windows server 2012 installed. ABC.com has a servernamed SERVER1 which has been configured to run the HYPER-V server role Server1 is configures to hostmultiple vitrual mahines. When ABC.com acquires a server with a better hardware configuration to SERVER1you are instructed to relocate the vitrual machines to the new server with as little interruptions as possible.Which of the following actions should you take ? (Choose all that apply.)

A. You should consider exporting the vitrual machines from Server1.B. You should consider running a snapshot backup of the SERVER1.C. You should consider importing the vitrual machine from Server1 to the new server.D. You shoul consider restoring the snapshot backup on the hard drives of the new server.



QUESTION 29You are employed as a network administrator at consoto.com. Contoso.com has in an Active Directory domainnamed contoso.com. All Servers on the contoso.com network have windows server 2012 installed. Acontoso.com server ,named Server1,hosts the Active Directory Certificate Services Server role and utilizes ahardware security module(HSM) to safeguard its private key. You have beed instructed to backup the ActiveDirectory Certificate Services (ADCS) database,log files,and private key regularly.You should not use a utility supplied by the hardware security module (HSM) creator.Which of the following actions should you take?

A. You should consider scheduling an incremental backupB. You Should consider making use of the certutil.exe command.C. You should consider schedulling a differential backupD. You should consider schedulling a copy backup


Explanation/Reference:Explanation:A. ADCS needs to be backup up using certutilB. -Backup, -backupdb, -backupKey: You can use Certutil.exe to dump and display certification authority (CA)configuration information, configure Certificate Services, backup and restore CA components, and verifycertificates, key pairs, and certificate chains.C. ADCS needs to be backup up using certutilD. ADCS needs to be backup up using certutilhttp://technet.microsoft.com/library/cc732443.aspxhttp://technet.microsoft.com/en-us/library/cc732443.aspx#BKMK_backup http://technet.microsoft.com/en-us/library/cc732443.aspx#BKMK_backupDB http://technet.microsoft.com/en-us/library/cc732443.aspx#BKMK_backupKey http://blogs.technet.com/b/pki/archive/2010/04/20/disaster-recovery-procedures-for-theactive-

directorycertificate-services-adcs.aspx

QUESTION 30You are employed as a senior network administrator at contoso.com contoso.com has an active directorydomain named contoso.com. All servers on the contoso.com network have windows server 2012 installed.You are currently running at training exercise for junior network administrators.You are discussing the DNSSEC NRPT rule properly.Which of the following describes the purpose of this rule property?

A. It is used to indicate the namespace to which the policy applies.B. It is used to indicate whether the DNS client should check for DNSSEC validation in the response.C. It is used to indicate DNSSEC must be used to protect DNS traffic for queries belonging to the namespace.D. It is used to whether DNS connections over DNSSEC will use encryption


Explanation/Reference:Explanation:A. NRPT is a table that contains rules you can configure to specify DNS settings or special behavior for namesor namespacesB. The DNS client's behavior is controlled by a policy(GPO) that determines whether the client should check forvalidation results for names within a given namespace.C.D. DNS does not provide any mechanism for the encryption of DNS queries and responses. http://technet.microsoft.com/en-us/library/ee649241(v=ws.10).aspx http://technet.microsoft.com/en-us/library/ee683904(v=ws.10).aspx http://technet.microsoft.com/en-us/library/ee649205(v=ws.10).aspx

QUESTION 31You are employed as a network administrator at contoso.com . Contoso.com has an active directory domainnamed contoso.com All servers on the contoso.com network have windows server 2012 installed.Contoso.com has a server named server1,which is configured as a file server. You have been instructed toenabled a feature that discovers and eradicates duplication within data without compromising its reliability oraccuracy.Which of the following actions should you take?

A. You should consider having the Data Deduplication feature enabled.B. You should consider having the Storage Spaces feature enabled.C. You should consider having the Storage Management feature enabled.D. You should consider having the folder redirection feature enabled.


Explanation/Reference:Explanation:A. Data deduplication involves finding and removing duplication within data without compromising its fidelity orintegrity

B. Storage Spaces in Windows Server 2012 and Windows 8 enables cost-effective, optimally used, highlyavailable, scalable, and flexible storage solutions for business-critical (virtual or physical) deployments.C. Windows Server 2012 enables storage management that is comprehensive and fully scriptable, andadministrators can manage it remotely.D. older Redirection lets administrators redirect the path of a folder to a new location. http://technet.microsoft.com/en-us/library/hh831602.aspx http://technet.microsoft.com/en- us/library/hh831739.aspxhttp://technet.microsoft.com/en-us/library/hh831751.aspx http://technet.microsoft.com/en-us/library/cc732275.aspxhttp://blogs.technet.com/b/filecab/archive/2012/05/21/introduction-to-data-deduplication- inwindows-server-2012.aspx

QUESTION 32You are employed as a network administrator at contoso.com. contoso.com has a single Active Directorydomain named contoso.com.All servers on the Contoso.com network have Windows server 2012 installed.Contoso.com has two servers,named server1 and server2 which are configured in a two-node fail

over cluster.You are currently configuration the quorum settings for the cluster. You want to make use of a quorum modethat allows each node to vote if it is available and in communication.Which of the following is the mode you should use?

A. Node MajorityB. Node and Disk MajorityC. Node and File Share MajorityD. No Majority:Disk Only


Explanation/Reference:Explanation:A. Allows each node to voteB. Allows each node and a disk witness to voteC. Allows each node and a File share witness to voteD. Allows one node with a specified disk to have quorum http://technet.microsoft.com/en- us/library/cc770620(v=ws.10).aspx

QUESTION 33You are employed as a network administrator at contoso.com. Contoso.com has a single Active Directorydomain named contoso.com. All servers on the contoso.com network have windows server 2012 installed.You are preparing to install a third-party application on a contoso.com server,named SERVER1. You find thatthe application is unable to install completely due to its driver not being digitally signed. You want to make surethat the application can be installed succesfully.Which of the following actions should you take_?

A. You should consider downloading a signed driverB. You should consider having SERVER1 is restored to an earlier dateC. You should consider making use of the Disable Driver Signature Enforcement option from the Advanced

Boot Option.D. You should consider restarting SERVER1 in safe Mode


Explanation/Reference:Explanation:A. The 3rd Party installation would need to be repackaged with a signed driver B. The restore to an older datewould only work if the earlier date had Driver Sig Enforcement disabled. C. Disable Driver SignatureEnforcement from Advanced Boot Options allows the OS to load without the signed driver requirementsD. Safe Mode will not allow the unsigned driver to be installed, you need to select Disable Driver SignatureEnforcement to not required signed drivershttp://technet.microsoft.com/en-us/library/bb491036.aspx http://windows.microsoft.com/en-

us/windows-vista/advanced-startup-options-includingsafe-mode

QUESTION 34You are employed as a senior network administrator at contoso.com. Contoso.com has a single ActiveDirectory Domain named contoso.com. All servers on the contoso.com network have windows server 2012installed.You are running a training exercise for junior network administrator.You are currently discussing the Dnslint.exe tool.Which of the following should this tool be used for ? (Choose all that apply)

A. To help diagnose common DNS name resolution issuesB. For developing scripts for configuring a DNS serverC. To administer the DNS server Service.D. To look for specific DNS record set and sure that they are consistent across multiple DNS servers.E. To verify that DNS records used specifially for Active Directory replication are correctF. To Create and delete zones and resource records.

Correct Answer: ADESection: (none)Explanation

Explanation/Reference:Explanation:http://support.microsoft.com/kb/321045

QUESTION 35You work as an administrator at contoso.com. Contoso.com network consists of a single domain namedcontoso.com. All servers on the contoso.com network have Windows server 2012 installed. Contoso.com has aserver,named SERVER1,which has the AD DS,DHCP and DNS server roles installed.Contoso.com also has aserver named SERVER2,which has the DHCP and Remote Access Server Role installed.You have configureda server,which has the File and Storage Services Server role installed.to automatically acquire an IPaddress.The server is named Server3 You then create a filter on SERVER1 Which of the following is a reasonfor this configuration?

A. To make sure that SERVER1 issues Server3 an IP address.B. To make sure that SERVER1 does not issue SERVER3 an IP addressC. To make sure that SERVER3 acquires a constant IP address from SERVER2 only.D. To make sure that SERVER3 is configured with a static IP address


Explanation/Reference:Explanation:A. MAC Address Filtering allows the ability to Deny a MAC addresses to be issued a IP from the DHCP serverB. Deny Filter would not allow SERVER1 to issue SERVER3 an IP C. A DHCP Reservation on SERVER2would be needed for a constant IP D.QUESTION: states itis configure to automatically acquire IPhttp://technet.microsoft.com/en-us/library/cc779507(v=ws.10).aspx http://technet.microsoft.com/en-us/library/ee941155(v=ws.10).aspx

QUESTION 36You are employed as a network administrator at ABC.com. ABC.com has an Active Directory domain namedABC.com. All servers on the ABC.com network have Windows server 2012 installed. You have been instructedto configure a custom Windows Recovery Environmen(Windows RE) image that should allow for a drive ismapped automatically to a network share in the event that a server is started using the imageWhich of the following actions should you take?

A. You should consider configuring the startnet.cmd in the imageB. You should consider configuring the startup.exe command included in the image.C. You should consider configuring the ntdsutil command included in the imageD. You should consider configuring the certutil.exe command included in the image



QUESTION 37You are employed as a senior network administrator at ABC.com. ABC.com has an Active Directory domainnamed ABC.com. All servers on the ABC.com network have windows server 2012 installed. You are currentlyrunning a training exercise for junior network administrators.You are discussing the endpoint types supportedby Active Directory Federation Services(AD FS) Which of the following are supported types?(Choose all thatapply)

A. SAML WebSSOB. AnonymousC. WS-Federation Passive

D. Client CerticateE. WS-Trust

Correct Answer: ACESection: (none)Explanation

Explanation/Reference:Explanation:http://technet.microsoft.com/en-us/library/adfs2-help-endpoints(v=ws.10).aspx

QUESTION 38You are employed as a senior network administrator at ABC.com. ABC.com has an Active Directory domainnamed ABC.com. All servers on the ABC.com network have windows server 2012 installed The ABC.comdomain has an Active Directory site configured in London,and an Active Directory site in New york.You have been instructed to make sure that the synchronization of account lockout data happens quicker.

A. You should consider editing the options attribute from WANLINK propertiesB. You should consider editing the options attribute from LANLIK propertiesC. You should consider editing the options attribute from the DEFAULTSITELINK propertiesD. You should consider editing the proxyAddressess attribute from the DEFAULTIPSITELINK properties.


Explanation/Reference:Explanation:http://technet.microsoft.com/en-us/library/cc961787.aspx

QUESTION 39You are employed as a senior network administrator at ABC.com. ABC.com has an Active Directory domainnamed ABC.com. All servers on the ABC.com network have windows server 2012 installed. ABC.com has twoservers,named SERVER1 and SERVER2 which are configured in a two-node failover cluster. Server1 includesa folder,named ABCAppData,which is configured as a Distributed File System (DFS) name space folder target.After configuring another two nodes in the failover cluster, you are instructed to make sure that access to ABCAppData is highly available. You also have to make sure that application data is replicated to ABCAppData viaDFS replication.Which following actions should you take ?

A. You should consider configuring a scale-out File ServerB. You should consider configuring the replication settings for the clusterC. You should consider configuring a file server for general useD. You should consider configuring the Quorum settings

Correct Answer: ASection: (none)

Explanation

Explanation/Reference:Explanation:http://technet.microsoft.com/en-us/library/hh831349.aspx

QUESTION 40Your network contains an Active Directory domain named contoso.com. The domain contains a server namedServer1 that runs Windows Server 2012 and has the DHCP Server server role installed.You need to create an IPv6 scope on Server1. The scope must use an address space that is reserved forprivate networks. The addresses must be routable.Which IPV6 scope prefix should you use?

A. FF00::B. 2001::

C. FD00:123:4567::D. FE80::


Explanation/Reference:Explanation:Prefixes in the fd00::/8 range have similar properties as those of the IPv4 private address ranges:* They are not allocated by an address registry and may be used in networks by anyone without

outside involvement.* They are not guaranteed to be globally unique.* Reverse Domain Name System (DNS) entries (under ip6.arpa) for fd00::/8 ULAs cannot be delegated in theglobal DNS.As fd00::/8 ULAs are not meant to be routed outside their administrative domain (site or organization),administrators of interconnecting networks normally do not need to worry about the uniqueness of ULAprefixes.

QUESTION 41Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. Thedomain contains three domain controllers. The domain controllers are configured as shown in the followingtable.

You discover that when you run Group Policy Results from Group Policy Management, the settings from site-linked Group Policy objects (GPOs) fail to appear in the results. You need to ensure that the settings from site-linked GPOs appear in the results. What should you do first?

A. Run adprep on DC3 by using Windows Server 2012 installation media.B. Transfer the infrastructure master role to DC3.C. Upgrade DC2 to Windows Server 2012.D. Run adprep on DC1 by using Windows Server 2003 installation media.


Explanation/Reference:Explanation:In this scenario a Windows 2012 server has been added to a Windows 2003 network.Note:* Before adding your new Windows 2012 Domain Controller, or attempting to perform an inplace upgrade of anexisting Windows 2008 or 2008 R2 DC, you must make sure that the Schema is upgraded to support your newWindows 2012 DC, and that you prepare each domain where you plan to install Windows 2012 DCs. To do thiswe can use the ADPREP.exe tool found in the support\adprep folder on your installation media.* Starting with Windows 2012 there is only one version of ADPREP available, and that is a 64-bit version.* Adprep is the utility--included in the OS installation media--that performs several crucial functions to upgrade

AD to support that OS. The utility has three major options: /forestprep, /domainprep, and /rodcprep. The /forestprep option runs first, extending the AD schema with new object and attribute classes that the new ADversion needs. The /domainprep option creates new well-known objects in AD, App1ies security changes, andmiscellaneous other bits. Finally, /rodcprep makes forest-wide security changes to allow read-only domaincontroller (RODC) functionality. The Windows Server 2012 version of adprep.exe can run on any server thatruns a 64- bit version of Windows Server 2008 or later. Reference: How to add a Windows Server 2012 domaincontroller to an existing Windows 2008 domainhttp://technet.microsoft.com/en-us/library/bb726995.aspxhttp://www.ipuptime.net/Multicast.aspxhttp://technet.microsoft.com/en-us/library/gg144561(v=exchg.141).aspx http://en.wikipedia.org/wiki/Unique_local_address


QUESTION 42Your network contains an Active Directory domain named contoso.com. The domain contains a server namedServer1 that runs Windows Server 2012 and has the DNS Server server role installed. Server1 is configured touse a DNS server from an Internet Service Provider (ISP) as a forwarder. Corporate management requires thatclient computers only resolve names of contoso.com computers. You need to configure Server1 to resolvenames in the contoso.com zone only.What should you do on Server1?

A. From DNS Manager, modify the root hints of Server1.B. From Windows PowerShell, run the Remove-DnsServerForwarder cmdlet.C. From Windows PowerShell, run the Set-NetDnsTransitionConfiguration cmdlet.D. From DNS Manager, modify the Advanced properties of Server1.


Explanation/Reference:Explanation:If the DNS server does not know the address of the requested site, then it will forward the request to anotherDNS server. In order to do so, the DNS server must know of the IP address of another DNS server that it canforward the request to. This is the job of root hints. Root hints provides a list of IP addresses of DNS serversthat are considered to be authoritative at the root level of the DNS hierarchy(also known as root name server).http://technet.microsoft.com/en-us/library/ee649221(v=ws.10).aspx http://technet.microsoft.com/en-us/library/jj649867.aspx http://technet.microsoft.com/en- us/library/jj613703.aspx

QUESTION 43You have a server named Server1 that runs Windows Server 2012. Each day, Server1 is backed up fully to anexternal disk. On Server1, the disk that contains the operating system fails. You replace the failed disk. Youneed to perform a bare-metal recovery of Server1 by using the Windows Recovery Environment (Windows RE).What should you use?

A. The Wbadmin.exe commandB. The Repair-bde.exe commandC. The Get-WBBareMetalRecovery cmdletD. The Start-WBVolumeRecovery cmdlet



A. Enables you to back up and restore your operating system, volumes, files, folders, and applications from acommand prompt.B. Accesses encrypted data on a severely damaged hard disk if the drive was encrypted by using BitLocker.Repair-bde can reconstruct critical parts of the drive and salvage recoverable data as long as a valid recoverypassword or recovery key is used to decrypt the data. C. Gets the value that indicates whether the ability toperform bare metal recoveries from backups has been added to the backup policy (WBPolicy object).D. Starts a volume recovery operation.

QUESTION 44You have a file server named Server1 that runs a Server Core Installation of Windows Server 2012. Server1has a volume named D that contains user data. Server1 has a volume named E that is empty. Server1 isconfigured to create a shadow copy of volume D every hour. You need to configure the shadow copies ofvolume D to be stored on volume E. What should you run?

A. The Set-Volume cmdlet with the -driveletter parameterB. The Set-Volume cmdlet with the -path parameterC. The vssadmin.exe add shadowstorage commandD. The vssadmin.exe create shadow command


Explanation/Reference:Explanation:A. Sets or changes the file system label of an existing volume. -DriveLetter Specifies a letter used to identify adrive or volume in the system.B. Sets or changes the file system label of an existing volume -Path Contains valid path information. C.Displays current volume shadow copy backups and all installed shadow copy writers and providers.AddShadowStroage Adds a shadow copy storage association for a specified volume. D. Displays currentvolume shadow copy backups and all installed shadow copy writers and providers. Shadow Creates a newshadow copy of a specified volume. http://technet.microsoft.com/en-us/library/cc754968(v=ws.10).aspx http://technet.microsoft.com/en-us/library/hh848673(v=wps.620).aspx

QUESTION 45Your network contains an Active Directory forest named contoso.com. All servers run Windows Server 2012.The domain contains four servers.The servers are configured as shown in the following table.

You need to deploy IP Address Management (IPAM) to manage DNS and DHCP. On which server should youinstall IPAM?

A. DC1B. DC2C. DC3D. Server1



QUESTION 46You have a server named Server1 that runs Windows Server 2012. Server1 is backed up by using WindowsServer Backup. The backup configuration is shown in the exhibit.

You discover that only the last copy of the backup is maintained. You need to ensure that multiple backupcopies are maintained. What should you do?

A. Modify the backup destination.B. Configure the Optimize Backup Performance settings.C. Modify the Volume Shadow Copy Service (VSS) settings.D. Modify the backup times.



Explanation:A, The destination in the exhibit shows a network share is used. If a network share is being used only the latestcopy will be savedhttp://windows.microsoft.com/en-us/windows7/where-should-i-save-my-backup


QUESTION 47You have a server named Server1 that runs Windows Server 2012. Server1 is located in the perimeter networkand has the DNS Server server role installed. Server1 has a zone named contoso.com. You apply a securitytemplate to Server1. After you apply the template, users report that they can no longer resolve names fromcontoso.com. On Server1, you open DNS Manager as shown in the DNS exhibit. (Click the Exhibit button.)

On Server1, you open Windows Firewall with Advanced Security as shown in the Firewall exhibit.(Click the Exhibit button.)

You need to ensure that users can resolve contoso.com names. What should you do?

A. From Windows Firewall with Advanced Security, disable the DNS (TCP, Incoming) rule and the DNS (UDP,Incoming) rule.

B. From DNS Manager, modify the Zone Transfers settings of the contoso.com zone.C. From DNS Manager, unsign the contoso.com zone.D. From DNS Manager, modify the Start of Authority (SOA) of the contoso.com zone.E. From Windows Firewall with Advanced Security, modify the profiles of the DNS (TCP, Incoming) rule and

the DNS (UDP, Incoming) rule.



QUESTION 48Your network contains an Active Directory domain named corp.contoso.com. You deploy Active DirectoryRights Management Services (AD RMS). You have a rights policy template named Template1. Revocation isdisabled for the template. A user named User1 can open content that is protected by Template1 while the useris connected to the corporate network. When User1 is disconnected from the corporate network, the usercannot open the protected content even if the user previously opened the content. You need to ensure that thecontent protected by Template1 can be opened by users who are disconnected from the corporate network.What should you modify?

A. The User Rights settings of Template1B. The templates file location of the AD RMS clusterC. The Extended Policy settings of Template1D. The exclusion policies of the AD RMS cluster


Explanation/Reference:Explanation:C. You can add trust policies so that AD RMS can process licensing requests for content that was rightsprotectedhttp://technet.microsoft.com/en-us/library/ee221071(v=ws.10).aspx

QUESTION 49Your company recently deployed a new Active Directory forest named contoso.com. The forest contains twoActive Directory sites named Site1 and Site2. The first domain controller in the forest runs Windows Server2012.You need to force the replication of the SYSVOL folder from Site1 to Site2.Which tool should you use?

A. Active Directory Sites and ServicesB. DFS ManagementC. RepadminD. Dfsrdiag


Explanation/Reference:Explanation:D. In Windows Server 2012, Windows Server 2008 R2, or Windows Server 2008, you can force replicationimmediately by using DFS Management, as described in Edit Replication Schedules. You can also forcereplication by using the Dfsrdiag SyncNow command. You can force polling by using the Dfsrdiag PollADcommand.http://technet.microsoft.com/en-us/library/cc773238(v=ws.10).aspx#BKMK_072

QUESTION 50You have 30 servers that run Windows Server 2012. All of the servers are backed up daily by using WindowsAzure Online Backup. You need to perform an immediate backup of all the servers to Windows Azure OnlineBackup. Which Windows PowerShell cmdlets should you run on each server?

A. Get-OBPolicy | StartOBBackupB. Start-OBRegistration | StartOBBackupC. Get-WBPolicy | Start-WBBackupD. Get-WBBackupTarget | Start-WBBackup


Explanation/Reference:Explanation:A. starts a backup job using a policyB. Registers the current computer to Windows Azure Backup.C. Not using AzureD. Not using Azurehttp://technet.microsoft.com/en-us/library/hh770406(v=wps.620).aspx http://technet.microsoft.com/en-us/library/hh770426.aspx http://technet.microsoft.com/en- us/library/hh770398.aspx

Exam D

QUESTION 1Your network contains an Active Directory domain named contoso.com. All domain controllers run WindowsServer 2012. The domain contains two domain controllers. The domain controllers are configured as shown inthe following table.

The Branch site contains a member server named Server1 that runs Windows Server 2012. You need toidentify which domain controller authenticated the computer account of Server1. What should you do?

A. Verify the value of the %LOGONSERVER% environment variable.B. Run nltest /sc_query.C. Verify the value of the %SESSIONNAME% environment variable.D. Run nltest /dsgetsite.


Explanation/Reference:Explanation:A. %LOGONSERVER% is the domain controller that authenticated the current user. B. Reports on the state ofthe secure channel the last time that you used it. (The secure channel is the one that the NetLogon serviceestablished.) This parameter lists the name of the domain controller that you queried on the secure channel,also.D. Returns the name of the site in which the domain controller resides. http://technet.microsoft.com/en-us/library/cc753915(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc731935(v=ws.10).aspx

QUESTION 2Your network contains an Active Directory domain named contoso.com. The domain contains two serversnamed Server1 and Server2 that run Windows Server 2012. Server1 is a file server that has the Hyper-V serverrole installed. Server1 hosts several virtual machines. The virtual machine configuration files are stored on driveD and the VHD files are stored on drive E. You plan to replace drive E with a larger volume. You need to ensurethat the virtual machines on

Server1 remain available while drive E is being replaced. What should you do?

A. Perform a quick migration.B. Add Server1 and Server2 as nodes in a failover cluster.C. Perform a live migration.D. Perform a storage migration.


Explanation

Explanation/Reference:Explanation:D. Hyper-V in Windows Server 2012 introduces support for moving virtual machine storage without downtimeby making it possible to move the storage while the virtual machine remains running.http://technet.microsoft.com/en-us/library/hh831656.aspx

QUESTION 3Your network contains an Active Directory domain named contoso.com. The domain contains a file servernamed File1 that runs a Server Core Installation of Windows Server 2012. File1 has a volume named D thatcontains home folders. File1 creates a shadow copy of volume D twice a day. You discover that volume D isalmost full. You add a new volume named H to File1. You need to ensure that the shadow copies of volume Dare stored on volume H. Which command should you run?

A. The Set-Volume cmdlet with the -driveletter parameterB. The vssadmin.exe create shadow commandC. The Set-Volume cmdlet with the -path parameterD. The vssadmin.exe add shadowstorage command


Explanation/Reference:Explanation:A. Sets or changes the file system label of an existing volume. -DriveLetter Specifies a letter used to identify adrive or volume in the system.B. Displays current volume shadow copy backups and all installed shadow copy writers and providers. ShadowCreates a new shadow copy of a specified volume. C. Sets or changes the file system label of an existingvolume -Path Contains valid path information. D. Displays current volume shadow copy backups and allinstalled shadow copy writers and providers.AddShadowStroage Adds a shadow copy storage association for a specified volume. http://technet.microsoft.com/en-us/library/cc754968(v=ws.10).aspx http://technet.microsoft.com/en-us/library/hh848673(v=wps.620).aspx

QUESTION 4Your network contains a perimeter network and an internal network. The internal network contains an ActiveDirectory Federation Services (AD FS) 2.1 infrastructure. The infrastructure uses Active Directory as theattribute store.You plan to deploy a federation server proxy to a server named Server2 in the perimeter network. You need toidentify which value must be included in the certificate that is deployed to Server2.

What should you identify?

A. The FQDN of the AD FS serverB. The name of the Federation ServiceC. The name of the Active Directory domainD. The public IP address of Server2


Explanation/Reference:Explanation:A. It must contain the FQDNhttp://technet.microsoft.com/en-us/library/cc776786(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc782620(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc759635(v=ws.10).aspx

QUESTION 5You have a server named Server1 that runs Windows Server 2012. Server1 has the File Server ResourceManager role service installed.You are creating a file management task as shown in the exhibit. (Click the Exhibit button.)

You need to ensure that the Include all folders that store the following kinds of data list displays an entry namedCorporate Data.What should you do?

A. Modify the properties of the System Files file group.B. Create a new classification property.C. Create a new file group.D. Modify the Folder Usage classification property.


Explanation/Reference:Explanation:B. Classification properties are used to assign values to files. http://technet.microsoft.com/en- us/library/dd758765(v=WS.10).aspx


QUESTION 6Your network contains an Active Directory forest named adatum.com. The forest contains an Active DirectoryRights Management Services (AD RMS) cluster.A partner company has an Active Directory forest named litwareinc.com. The partner company does not haveAD RMS deployed.You need to ensure that users in litwareinc.com can consume rights-protected content from adatum.com.Which type of trust policy should you create?

A. At federated trustB. A trusted user domainC. A trusted publishing domainD. Windows Live ID


Explanation/Reference:Explanation:A. In AD RMS rights can be assigned to users who have a federated trust with Active Directory FederationServices (AD FS). This enables an organization to share access to rights-protected content with anotherorganization without having to establish a separate Active Directory trust or Active Directory RightsManagement Services (AD RMS) infrastructure. http://technet.microsoft.com/en-us/library/dd772651(v=WS.10).aspx http://technet.microsoft.com/en-us/library/cc738707(v=WS.10).aspx http://technet.microsoft.com/en-us/library/cc757344(v=ws.10).aspx


The Branch site contains a perimeter network.For security reasons, client computers in the perimeter network can communicate with client computers in theBranch site only. You plan to deploy a new RODC to the perimeter network in the Branch site. You need toensure that the new RODC will be able to replicate from DC10. What should you do first on DC10?

A. Run the Add-ADDSReadOnlyDomainControllerAccount cmdlet.

B. Create an Active Directory site.

C. Run the Active Directory Domain Services Configuration Wizard.D. Create an Active Directory subnet.


Explanation/Reference:Explanation:Add-ADDSReadOnlyDomainControllerAccount Creates a read-only domain controller (RODC) account that canbe used to install an RODC in Active Directory.Note:* NotesOnce you have added the RODC account, you can add an RODC to a server computer by using the Install-ADDSDomainController cmdlet with the -ReadOnlyReplica switch parameter.* ExampleAdds a new read-only domain controller (RODC) account to the corp.contoso.com domain using the NorthAmerica site as the source site for the replication source domain controller.C:\PS>Add-ADDSReadOnlyDomainControllerAccount -DomainControllerAccountName RODC1 -DomainName corp.contoso.com -SiteName NorthAmerica Incorrect:Not B: There already is a branch site.Reference: Add-ADDSReadOnlyDomainControllerAccount


You configure a user named User1 as a delegated administrator of DC10. You need to ensure that User1 canlog on to DC10 if the network link between the Main site and the Branch site fails.What should you do?

A. Add User1 to the Domain Admins group.B. Modify the properties of the DC10 computer account.C. Run repadmin and specify /replsingleobject parameter.D. On DC10, modify the User Rights Assignment in Local Policies.


Explanation/Reference:Explanation:Modify the following policy:Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment\Allow logon locallyNote:

* User Rights Assignment policies determines which users or groups have logon rights or privileges on thecomputer.* Delegated administrator accounts gain local administrative permissions to the RODC. These users canoperate with privileges equivalent to the local computer's Administrators group. They are not members of theDomain Admins or the domain built-in Administrators groups. This option is useful for delegating branch officeadministration without giving out domain administrative

permissions. Configuring delegation of administration is not required.

QUESTION 9Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. Theforest functional level is Windows Server 2012. You have a domain controller named DC1. On DC1, you createa new Group Policy object (GPO) named GPO1. You need to verify that GPO1 was replicated to all of thedomain controllers.Which tool should you use?

A. Group Policy ManagementB. Active Directory Sites and ServicesC. DFS ManagementD. Active Directory Administrative Center


Explanation/Reference:Explanation:http://social.technet.microsoft.com/Forums/en-US/winserverTS/thread/3e580e00-d6194d25- b22d-18f0170279c4http://technet.microsoft.com/en-us/library/jj134176.aspx

QUESTION 10Your network contains two DNS servers named DNS1 and DNS2 that run Windows Server 2012. DNS1 has aprimary zone named contoso.com. DNS2 has a secondary copy of the contoso.com zone. You need to log thezone transfer packets sent between DNS1 and DNS2. What should you configure?

A. Monitoring from DNS ManagerB. Logging from Windows Firewall with Advanced SecurityC. A Data Collector Set (DCS) from Performance MonitorD. Debug logging from DNS Manager


Explanation/Reference:Explanation:http://technet.microsoft.com/en-us/library/cc776361(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc749337.aspx

QUESTION 11Your network contains an Active Directory forest.The forest contains one domain named contoso.com. The domain contains three domain controllers. Thedomain controllers are configured as shown in the following table.

DC1 has all of the operations master roles installed. You transfer all of the operations master roles to DC2, andthen you uninstall Active Directory from DC1. You need to ensure that you can use Password Settings objects(PSOs) in the domain.

What should you do?

A. Change the domain functional level.B. Upgrade DC2.C. Run the dcgpofix.exe command.D. Transfer the schema master role.


Explanation/Reference:Explanation:A. The domain functional level must be Windows Server 2008 to use PSO's B. DC1 needs to be upgradedC. Recreates the default Group Policy Objects (GPOs) for a domain D. Schema isn't up to right levelhttp://technet.microsoft.com/en-us/library/cc770394(v=ws.10).aspx http://technet.microsoft.com/en-us/library/hh875588(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc753104.aspx

QUESTION 12Your network contains an Active Directory domain named contoso.com. The domain contains a server namedServer3 that runs Windows Server 2012 and has the DHCP Server server role installed. DHCP is configured asshown in the exhibit.

You need to ensure that only Scope1, Scope3, and Scope5 assign the same DNS servers to DHCP clients.The solution must minimize administrative effort.What should you do?

A. Create a superscope and scope-level policies.B. Configure the Scope Options.C. Create a superscope and a filter.


D. Configure the Server Options.


Explanation/Reference:Explanation:B. Any DHCP scope options configured for assignment to DHCP clients http://technet.microsoft.com/en-us/library/dd759218.aspxhttp://technet.microsoft.com/en-us/library/cc757682(v=WS.10).aspx

QUESTION 13You have a server named Server1 that runs Windows Server 2012. Server1 fails. You identify that the masterboot record (MBR) is corrupt. You need to repair the MBR. Which tool should you use?

A. BcdeditB. BcdbootC. BootrecD. Fixmbr

Correct Answer: CSection: (none)

Explanation

Explanation/Reference:Explanation:A. BCDEdit is a command-line tool for managing BCD stores. It can be used for a variety of purposes, includingcreating new stores, modifying existing stores, adding boot menu options, and so on. BCDEdit servesessentially the same purpose as Bootcfg.exe on earlier versions of Windows B. The BCDboot tool is acommand-line tool that enables you to manage system partition files C. Bootrec.exe tool to troubleshoot"Bootmgr Is Missing" issue. The /ScanOs option scans all disks for installations that are compatible withWindows Vista or Windows 7. Additionally, this option displays the entries that are currently not in the BCDstore. Use this option when there are Windows Vista or Windows 7 installations that the Boot Manager menudoes not list. D. Repairs the master boot record of the boot disk. The fixmbr command is only available whenyou are using the Recovery Console. Fixmbr option in Server 2008 and 2012 is a bootrec option http://technet.microsoft.com/en-us/library/cc709667(v=ws.10).aspx http://technet.microsoft.com/en-us/library/dd744347(v=ws.10).aspx http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/enus/bootcons_fix mbr.mspx?mfr=truehttp://www.youtube.com/watch?v=kFU8kngy6O0http://social.technet.microsoft.com/Forums/en-US/winservergen/thread/bbf4f440-50ce4ea2-a3eaa96dc2500352


You configure a user named User1 as a delegated administrator of DC10. You need to ensure that User1 canlog on to DC10 if the network link between the Main site and

the Branch site fails. What should you do?

A. Add User1 to the Domain Admins group.B. On DC10, run ntdsutil and configure the settings in the Roles context.C. Run repadmin and specify the /prp parameter.D. On DC1, modify the User Rights Assignment in Default Domain Controllers Group Policy object (GPO).


Explanation/Reference:Explanation:Modify the following policy:Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment\Allow logon locallyNote:* User Rights Assignment policies determines which users or groups have logon rights or privileges on thecomputer.* Delegated administrator accounts gain local administrative permissions to the RODC. These users canoperate with privileges equivalent to the local computer's Administrators group. They are not members of the

Domain Admins or the domain built-in Administrators groups. This option is useful for delegating branch officeadministration without giving out domain administrative permissions. Configuring delegation of administration isnot required.

QUESTION 15You perform a full installation of Windows Server 2012 on a virtual machine named Server1. You plan to useServer1 as a reference image. You need to minimize the amount of storage space used by the Windows Server2012 installation. Which cmdlet should you use?

A. Remove-ModuleB. Optimize-VHDC. Optimize-VolumeD. Uninstall-WindowsFeature


Explanation/Reference:Explanation:The Optimize-VHD cmdlet optimizes the allocation of space in or more virtual hard disk files, except for fixedvirtual hard disks. The Compact operation is used to optimize the files. This operation reclaims unused blocksas well as rearranges the blocks to be more efficiently packed, which reduces the size of a virtual hard disk file.Reference: Optimize-VHDhttp://technet.microsoft.com/en-us/library/hh849732.aspx http://technet.microsoft.com/en- us/library/hh848458.aspx http://technet.microsoft.com/en-us/library/hh848675.aspx http://technet.microsoft.com/en-us/library/jj205471.aspx

QUESTION 16Your network contains an Active Directory domain named contoso.com. The domain contains a server namedServer1 that runs Windows Server 2012 and has the DHCP Server server role installed.Server1 has a scope named Scope1. A policy named Policy1 is configured for Scope1. Policy1 is configured toprovide Hyper-V virtual machines a one-day lease. All other computers receive an eight-day lease.You implement an additional DHCP server named Server2 that runs Windows Server 2012.On Server1, you configure Scopel for DHCP failover.You discover that virtual machines that receive IP addresses from Server2 have a lease duration of eight days.

You need to ensure that when Server2 assigns IP addresses to the Hyper-V virtual machines, the leaseduration is one day. The solution must ensure that other computers that receive IP addresses from Server2have a lease duration of eight days.What should you do?

A. On Server2, right-click Scope1, and then click Reconcile.B. On Server1, right-click Scope1, and then click Replicate Scope.C. On Server2, create a new DHCP policy.D. On Server1, delete Policy1, and then recreate the policy.


Explanation/Reference:Explanation:Scope 1 has been set up for DHCP failover. Now we need to replicate it from Server1 to Server2. http://technet.microsoft.com/en-us/library/dd183579(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc772101.aspx

QUESTION 17You deploy an Active Directory Federation Services (AD FS) 2.1 infrastructure. The infrastructure uses ActiveDirectory as the attribute store. Some users report that they fail to authenticate to the AD FS infrastructure. Youdiscover that only users who run third-party web browsers experience issues. You need to ensure that all of theusers can authenticate to the AD FS infrastructure successfully. Which Windows PowerShell command shouldyou run?

A. Set-ADFSProperties -ProxyTrustTokenLifetime 1:00:00B. Set-ADFSProperties -AddProxyAuthenticationRules NoneC. Set-ADFSProperties -SSOLifetime 1:00:00D. Set-ADFSProperties -ExtendedProtectionTokenCheck None


Explanation/Reference:Explanation:A. Sets the valid token lifetime for proxy trust tokens (in minutes). This value is used by the federation serverproxy to authenticate with its associated federation server. B. Specifies a policy rule set that can be used toestablish authorization permissions for setting up trust proxies. The default value allows the AD FS 2.0 serviceuser account or any member of BUILTIN\Administrators to register a federation server proxy with theFederation Service. C. Specifies the duration of the single sign-on (SSO) experience for Web browser clients(in minutes). D. pecifies the level of extended protection for authentication supported by the federation server.Extended Protection for Authentication helps protect against man-in-the-middle (MITM) attacks, in which anattacker intercepts a client's credentials and forwards them to a server.http://technet.microsoft.com/zh-cn/library/ee892317.aspx

QUESTION 18Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012.The domain contains a file server named Server1. The domain contains a domain controller named DC1.Server1 contains three shared folders. The folders are configured as shown in the following table.

Folder2 has a conditional expression of User.Department= = MMarketing". You discover that a user namedUser1 cannot access \\Server1\folder2. User1 can access \\Server1\folderl and \\Server1\folder3. You verify thegroup membership of User1 as shown in the Member Of exhibit. (Click the Exhibit button.)

"First Test, First Pass" - www.lead2pass.com 148

Microsoft 70-412 Exam

You verify the organization information of User1 as shown in the Organization exhibit.(Click the Exhibit button.)


You verify the general properties of User1 as shown in the General exhibit. (Click the Exhibit button.)


You need to ensure that User1 can access the contents of \\Server1\folder2. What should you do?

A. From a Group Policy object (GPO), set the Support for Dynamic Access Control and Kerberos armoringsetting to Always provide claims.

B. Change the department attribute of User1.C. Grant the Full Control NTFS permissions on Folder2 to User1.D. Remove Userl1from the Accounting global group.


Explanation/Reference:Explanation:B. Conditional Expression and users Department must match http://technet.microsoft.com/en- us/library/jj134043.aspx

QUESTION 19Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows

Server 2012. The domain contains two domain controllers. The domain controllers are

configured as shown in the following table.

The Branch site contains a perimeter network.For security reasons, client computers in the perimeter network can communicate with client computers in theBranch site only. You plan to deploy a new RODC to the perimeter network in the Branch site. You need toensure that the new RODC will be able to replicate from DC10. What should you do first on DC10?

A. Enable the Bridge all site links setting.B. Run the Active Directory Domain Services Configuration Wizard.C. Create an Active Directory site link bridge.D. Create an Active Directory site.


Explanation/Reference:Explanation:A. Site link transitivity is controlled by the Bridge all site links option on the properties pages of transport folders(such as IP or SMTP) in the Active Directory Sites and Services snapin. Site link transitivity is enabled bydefault.B.C.If you cannot place a writable Windows Server 2008 domain controller in the nearest site to the RODC, RODCreplication depends on a site link bridge between the site links that contain the site of the RODC and the site ofthe writable Windows Server 2008 domain controller.D.AD Site not readed for RODChttp://technet.microsoft.com/en-us/library/dd736189(v=WS.10).aspx http://technet.microsoft.com/en-us/library/cc738789(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc732632(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc778718(v=WS.10).aspx

QUESTION 20Your network contains an Active Directory domain named contoso.com. The domain contains two memberservers named Server1 and Server2 that run Windows Server 2012. Server1 has Microsoft SQL Server 2012installed.You install the Active Directory Federation Services server role on Server2. You need to configure Server2 asthe first Active Directory Federation Services (AD FS) server in the domain. The solution must ensure that theAD FS database is stored in a SQL Server database on Server1.What should you do on Server2?

A. From a command prompt, run fsutil.exe.B. From Windows PowerShell, run Install-ADFSFarm.C. From Server Manager, install the Federation Service Proxy.D. From Server Manager, install the AD FS Web Agents.

Correct Answer: BSection: (none)

Explanation

Explanation/Reference:Explanation:A. Performs tasks that are related to file allocation table (FAT) and NTFS file systems, such as

managing reparse points, managing sparse files, or dismounting a volume. B. Creates the first node of a newfederation server farm C. Not installing Proxy D. Not Installing web agentshttp://technet.microsoft.com/en-us/library/cc753059(v=ws.10).aspx http://technet.microsoft.com/en-us/library/jj553792.aspx Parameter: -SQLConnectionString<String> Specifies the SQL Server database that will store theAD FS configuration settings. If not specified, the AD FS installer uses the Windows Internal Database to storeconfiguration settings.

QUESTION 21Hotspot QuestionYour network contains an Active Directory domain named contoso.com. The domain contains two memberservers named Server1 and Server2. All servers run Windows Server 2012. Server1 and Server2 have theNetwork Load Balancing (NLB) feature installed. The servers are configured as nodes in an NLB cluster namedCluster1. Both servers connect to the same switch. Cluster1 hosts a secure web application named WebApp1.WebApp1 saves user state information in a central database.You need to ensure that the connections to WebApp1 are distributed evenly between the nodes.The solution must minimize port flooding.What should you configure?To answer, configure the appropriate affinity and the appropriate mode for Cluster1 in the answer area.

A.B.C.D.



QUESTION 22Drag and Drop QuestionYou have 3 server named Server1 that runs Windows Server 2012.

You are asked to test Windows Azure Online Backup to back up Server1. You need to back up Server1 byusing Windows Azure Online Backup. Which four actions should you perform in sequence? To answer, movethe appropriate four actions from the list of actions to the answer area and arrange them in the correct order.

A.B.C.D.



QUESTION 23Hotspot QuestionYour company has a primary data center and a disaster recovery data center. The network contains an ActiveDirectory domain named contoso.com. The domain contains a server named Server1 runs Windows Server2012. Server1 is located in the primary data center. Server1 has an enterprise root certification authority (CA)for contoso.com.You deploy another server named Server2 to the disaster recovery data center. You plan to configure Server2as a secondary certificate revocation list (CRL) distribution point. You need to configure Server2 as a CRLdistribution point (CDP). Which tab should you use to configure the required CDP entry? To answer, select theappropriate tab in the answer area.

A.B.C.D.



QUESTION 24Hotspot QuestionYour network contains an Active Directory domain named contoso.com. The domain contains a server namedServer1 that runs Windows Server 2012. Server1 has the Active Directory Federation Services server roleinstalled.You need to make configuration changes to the Windows Token-based Agent role service.Which tool should you use?To answer, select the appropriate tool in the answer area.Hot Area:

A.B.C.D.



QUESTION 25Hotspot QuestionYour network contains an Active Directory domain named contoso.com. The domain contains two memberservers named Server1 and Server2. All servers run Windows Server 2012. Server1 and Server2 have theHyper-V server role installed. The servers are configured as shown in the following table.

You add a third server named Server3 to the network. Server3 has Intel processors. You need to move VM3and VM6 to Server3. The solution must minimize downtime on the virtual machines. Which method should you

use to move each virtual machine? To answer, select the appropriate method for each virtual machine in theanswer area.

A.B.C.D.



QUESTION 26Drag and Drop QuestionYour network contains an Active Directory domain named contoso.com. The domain contains two DHCPservers named DHCP1 and DHCP2 that run Windows Server 2012. You install the IP Address Management(IPAM) Server feature on a member server named Server1 and you run the Run Invoke-IpamGpoProvisioningcmdlet.You need to manage the DHCP servers by using IPAM on Server1. Which three actions should you perform?To answer, move the three appropriate actions from the list of actions to the answer area and arrange them inthe correct order.

A.B.C.D.



QUESTION 27Hotspot QuestionYour network contains an Active Directory domain named contoso.com. The domain contains two memberservers named Server1 and Server2. All servers run Windows Server 2012. Server1 and Server2 have theHyper-V server role and the Failover Clustering feature installed. Server1 and Server2 are members of a clusternamed Cluster1. Cluster1 hosts 10 virtual machines. When you try to migrate a running virtual machine fromone server to another, you receive the following error message:

"There was an error checking for virtual machine compatibility on the target node."

You need to ensure that the virtual machines can be migrated from one node to another. From which nodeshould you perform the configuration? To answer, select the appropriate node in the answer area.

A.B.C.D.



QUESTION 28Hotspot QuestionYour network contains two servers named Server1 and Server2 that run Windows Server 2012. Server1 andServer2 have the Hyper-V server role installed. Server1 and Server2 have different processor models from thesame manufacturer. On Server1, you plan to create a virtual machine named VM1. Eventually, VM1 will be

exported to Server2. You need to ensure that when you import VM1 to Server2, you can start VM1 from savedsnapshots.What should you configure on VM1? To answer, select the appropriate node in the answer area.

A.B.C.

D.



QUESTION 29Hotspot QuestionYour network contains an Active Directory domain named contoso.com. The domain contains a file servernamed Server1. Server1 is a BranchCache hosted cache server that is located in a branch office.The network contains client computers that run either Windows 7 or Windows 8. For the branch office, all of theuser accounts and the client computer accounts are located in an organizational unit (OU) named Branch1. AGroup Policy object (GPO) named GPO1 is linked to Branch 1. GPO1 contains the BranchCache settings.You discover that users in the branch office who have client computers that run Windows 7 do not accesscached content from Server1. Users in the branch office who have Windows 8 computers access cachedcontent from Server1.You need to configure the Windows 7 computers to use BranchCache on Server1. Which setting should youconfigure in GPO1?To answer, select the appropriate setting in the answer area.

A.B.C.D.



QUESTION 30Hotspot QuestionYour network contains two DHCP servers named Server1 and Server2. Server1 fails. You discover that DHCPclients can no longer receive IP address leases. You need to ensure that the DHCP clients receive IPaddresses immediately. What should you configure from the View/Edit Failover Relationship settings? Toanswer, select the appropriate setting in the answer area.

A.B.C.D.




QUESTION 31Your network contains an Active Directory domain named contoso.com. The domain contains a server namedServer1 that runs Windows Server 2012. Server1 has the Active Directory Certificate Services server roleinstalled and configured. For all users, you are deploying smart cards for logon. You are using an enrollmentagent to enroll the smart card certificates for the users. You need to configure the Contoso Smartcard Logoncertificate template to support the use of the enrollment agent. Which setting should you modify? To answer,select the appropriate setting in the answer area.

A.B.C.D.



QUESTION 32Hotspot QuestionYour network contains an Active Directory domain named contoso.com. The domain contains the twoservers.The servers are configured as shown in the following table.

You investigate a report about the potential compromise of a private key for a certificate issued to Server2.You need to revoke the certificate issued to Server2. The solution must ensure that the revocation can bereverted. Which reason code should you select? To answer, select the appropriate reason

code in the answer area.

A.B.C.D.



QUESTION 33Drag and Drop QuestionYour network contains two Active Directory forests named contoso.com and adatum.com. All domaincontrollers run Windows Server 2012. A federated trust exists between adatum.com and contoso.com. Thetrust provides adatum.com users with access to contoso.com resources. You need to configure Active Directory

Federation Services (AD FS) claim rules for the federated trust. The solution must meet the followingrequirements:

In contoso.com, replace an incoming claim type named Group with an outgoing claim type named

Role.In adatum.com, allow users to receive their tokens for the relying party by using their Active Directory groupmembership as the claim type.

The AD FS claim rules must use predefined templates.Which rule types should you configure on each side of the federated trust? To answer, drag the appropriate ruletypes to the correct location or locations. Each rule type may be used once, more than once, or not at all. Youmay need to drag the split bar between panes or scroll to view content.

A.B.C.D.



QUESTION 34Drag and Drop QuestionYour network contains four servers that run Windows Server 2012. Each server hasthe Failover Clustering feature installed. Each server has three network adapters installed. An iSCSI SAN isavailable on the network.You create a failover cluster named Cluster1.You add the servers to the cluster.

You plan to configure the network settings of each server node as shown in the following table.

You need to configure the network settings for Cluster1.What should you do?To answer, drag the appropriate network communication setting to the correct cluster network. Each networkcommunication setting may be used once, more than once, or not at all. You may need to drag the split barbetween panes or scroll to view content.Select and Place:

A.B.C.D.



QUESTION 35Hotspot QuestionYou have a server named Server1 that runs Windows Server 2012. The volumes on Server1 are configured asshown in the following table.

A new corporate policy states that backups must use Windows Azure Online Backup whenever possible.You need to identify which backup methods you must use to back up Server1. The solution must use WindowsAzure Online Backup whenever possible. Which backup type should you identify for each volume? To answer,select the appropriate backup type for each volume in the answer area.

A.B.C.D.



QUESTION 36Drag and Drop QuestionYour network contains an Active Directory domain named contoso.com. The domain contains four memberservers named Server1, Server2, Servers, and Server4. All servers run Windows Server 2012. Server1 andServer2 are located in a site named Site1. Server3 and Server4 are located in a site named Site2. The serversare configured as nodes in a failover cluster named Cluster1. Cluster1 is configured to use the Node Majorityquorum configuration. You need to ensure that Server1 is the only server in Site1 that can vote to maintainquorum. What should you run from Windows PowerShell? To answer, drag the appropriate commands to thecorrect location. Each command may be used once, more than once, or not at all. You may need to drag thesplit bar between panes or scroll to view content.

A.B.C.D.



QUESTION 37Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. Thedomain contains three domain controllers. The domain controllers are configured as shown in the followingtable.

You plan to test an application on a server named Server1. Server1 is currently located in Site1. After the test,Server1 will be moved to Site2. You need to ensure that Server1 attempts to authenticate to DC3 first, while youtest the application. What should you do?

A. Create a new site and associate the site to an existing site link object.B. Modify the priority of site-specific service location (SRV) DNS records for Site2.C. Create a new subnet object and associate the subnet object to an existing site.D. Modify the weight of site-specific service location (SRV) DNS records Site1.


Explanation/Reference:Explanation:Service Location (SRV) Resource RecordPriority A number between 0 and 65535 that indicates the priority or level of preference given for this record tothe host that is specified in Host offering this service. Priority indicates this host's priority with respect to theother hosts in this domain that offer the same service and are specified by different service location (SRV)resource records.Incorrect:Not D:Weight: A number between 1 and 65535 to be used as a load-balancing mechanism. When you select amongmore than one target SRV host for the type of service (specified in Service) that use the same Priority number,you can use this field to weight preference toward specific hosts. Where several hosts share equal priority,

SRV-specified hosts with higher weight values that are entered here should be returned first to resolver clientsin SRV query results. Reference: Service Location (SRV) Resource Record Dialog Box

QUESTION 38Your network contains an Active Directory domain named contoso.com. The domain contains a file servernamed Server1.

The File Server Resource Manager role service is installed on Server1. All servers run Windows Server 2012. AGroup Policy object (GPO) named GPO1 is linked to the organizational unit (OU) that contains Server1. Thefollowing graphic shows the configured settings in GPO1. Server1 contains a folder named Folder1. Folder1 isshared as Share1. You attempt to configure access-denied assistance on Server1, but the Enable access-denied assistance option cannot be selected from File Server Resource Manager. You need to ensure that youcan configure access-denied assistance on Server1 manually by using File Server Resource Manager. Whichtwo actions should you perform?

A. Set the Enable access-denied assistance on client for all file types policy setting to Disabled for GPO1.B. Set the Customize message for Access Denied errors policy setting to Not Configured for GPO1.C. Set the Enable access-denied assistance on client for all file types policy setting to Enabled for GPO1.D. Set the Customize message for Access Denied errors policy setting to Enabled for GPO1.


Explanation/Reference:Explanation:D. ensure that you can configure access-denied assistancehttp://technet.microsoft.com/en-us/library/hh831402.aspx#BKMK_1

QUESTION 39Your company has a main office and a remote office. The remote office is used for disaster recovery. Thenetwork contains an Active Directory domain named contoso.com. The domain contains member serversnamed Server1, Server2, Server3, and Server4. All servers run Windows Server 2012. Server1 and Server2are located in the main office. Server3 and Server4 are located in the remote office.All servers have the Failover Clustering feature installed. The servers are configured as nodes in a failovercluster named Cluster1. Storage is replicated between the main office and the remote site. You need to ensurethat Cluster1 is available if two nodes in the same office fail. What are two possible quorum configurations thatachieve the goal? (Each correct answer presents a complete solution. Choose two.)

A. Node MajorityB. No Majority: Disk OnlyC. Node and File Share Majority

D. Node and Disk Majority

Correct Answer: ABSection: (none)Explanation


Depending on the quorum configuration option that you choose and your specific settings, the cluster will beconfigured in one of the following quorum modes:* (A) Node majority (no witness) Only nodes have votes. No quorum witness is configured. The cluster quorumis the majority of voting nodes in the active cluster membership.* (B) No majority (disk witness only) No nodes have votes. Only a disk witness has a vote. The cluster quorumis determined by the state of the disk witness. The cluster has quorum if one node is available andcommunicating with a specific disk in the cluster storage. Generally, this mode is not recommended, and itshould not be selected because it creates a single point of failure for the cluster.* Node majority with witness (disk or file share)Nodes have votes. In addition, a quorum witness has a vote. The cluster quorum is the majority of voting nodesin the active cluster membership plus a witness vote. A quorum witness can be a designated disk witness or adesignated file share witness.Note:* Quorum in Windows 2008 R2 referred to a consensus , that is, a majority of votes is required in order to reachquorum and maintain stability of the cluster. A new option created in Windows Server 2012 which was alsoback ported to Windows Server 2008 R2 SP1 was the ability to stop a node being able to participate in thevoting process.* Dynamic quorum is the ability of the cluster to recalculate quorum on the fly and still maintain a workingcluster. This is a huge improvement as we are now able to continue to run a cluster even if the number ofnodes remaining in the cluster is less than 50%. This was not possible before but the dynamic quorum conceptnow allows us to do this. In fact we can reduce the cluster down to the last node (known as last man standing)and still maintain quorum. Reference: Configure and Manage the Quorum in a Windows Server 2012 FailoverCluster

QUESTION 40Your network contains an Active Directory domain named contoso.com. The domain contains four serversnamed Server1, Server2, Server3, and Server4 that run Windows Server 2012. All servers have the Hyper-Vserver role and the Failover Clustering feature installed. The servers are configured as shown in the followingtable.


A. From Hyper-V Manager on a node in Cluster2, create three virtual machines.B. From Hyper-V Manager on a node in Cluster2, modify the Hyper-V settings.C. From Failover Cluster Manager on Cluster1, configure each virtual machine for replication.D. From Cluster1, add and configure the Hyper-V Replica Broker role.E. From Cluster2, add and configure the Hyper-V Replica Broker role.

Correct Answer: ACESection: (none)Explanation

Explanation/Reference:Explanation:A: Need to have same number of replicated VMs in the replicated site.C: Once the hosting server is configured for Replica, you can enable replication for each virtual

machine that you want to be replicated.E: The Hyper-V Replica Broker is placed in the replicated cluster Note:* Each node of the failover cluster that is involved in Replica must have the Hyper-V server role installed.* Windows Server 2012 Hyper-V Replica is a built-in mechanism for replicating Virtual Machines (VMs). It canreplicate selected VMs in real-time or asynchronously from a primary site to a designated replica site acrossLAN/WAN. Here a replica site hosts a replicated VM while an associated primary site is where the source VMruns. And either a replica site or a primary site can be a Windows Server 2012 Hyper-V host or a WindowsServer 2012 Failover Cluster.

QUESTION 41Your network contains an Active Directory forest named contoso.com. The forest contains two domains namedcontoso.com and childl.contoso.com. The domains contain three domain controllers.The domain controllers are configured as shown in the following table.

You need to ensure that the KDC support for claims, compound authentication, and kerberos armoring settingis enforced in the child1.contoso.com domain. Which two actions should you perform? (Each correct answerpresents part of the solution. Choose two.)

A. Upgrade DC1 to Windows Server 2012.B. Upgrade DC11 to Windows Server 2012.C. Raise the domain functional level ofchildl.contoso.com,D. Raise the domain functional level of contoso.com.E. Raise the forest functional level of contoso.com.



QUESTION 42You have a server named Server1 that runs Windows Server 2012. The storage on Server1 is configured asshown in the following table.

You plan to implement Data Deduplication on Server1. You need to identify on which drives you can enableData Deduplication. Which three drives should you identify? (Each correct answer presents part of the solution.Choose three.)

A. CB. DC. ED. FE. G

Correct Answer: BDESection: (none)Explanation

Explanation/Reference:Explanation:Volumes that are candidates for deduplication must conform to the following requirements:* (not A) Must not be a system or boot volume. Deduplication is not supported on operating system volumes.* Can be partitioned as a master boot record (MBR) or a GUID Partition Table (GPT), and must be formattedusing the NTFS file system.* Can reside on shared storage, such as storage that uses a Fibre Channel or an SAS array, or when an iSCSISAN and Windows Failover Clustering is fully supported.* Do not rely on Cluster Shared Volumes (CSVs). You can access data if a deduplicationenabled volume isconverted to a CSV, but you cannot continue to process files for deduplication.* (not C) Do not rely on the Microsoft Resilient File System (ReFS).* Must be exposed to the operating system as non-removable drives. Remotely-mapped drives are notsupported.http://technet.microsoft.com/en-us/library/hh831700.aspx

QUESTION 43You have 20 servers that run Windows Server 2012.You need to create a Windows PowerShell script that registers each server in Windows Azure Online Backupand sets an encryption passphrase. Which two PowerShell cmdlets should you run in the script? (Each correctanswer presents part of the solution. Choose two.)

A. New-OBPolicyB. New-OBRetentionPolicyC. Add-OBFileSpecD. Start-OBRegistrationE. Set OBMachineSetting

Correct Answer: DESection: (none)

Explanation

Explanation/Reference:Explanation:D: Start-OBRegistration

Registers the current computer with Windows Azure Online Backup using the credentials (username andpassword) created during enrollment.E: The Set-OBMachineSetting cmdlet sets a OBMachineSetting object for the server that includes proxy serversettings for accessing the internet, network bandwidth throttling settings, and the encryption passphrase that isrequired to decrypt the files during recovery to another server.Incorrect:Not C: The Add-OBFileSpec cmdlet adds the OBFileSpec object, which specifies the items to include orexclude from a backup, to the backup policy (OBPolicy object). The OBFileSpec object can include or excludemultiple files, folders, or volumes. T http://technet.microsoft.com/en- us/library/hh770416(v=wps.620).aspxhttp://technet.microsoft.com/en-us/library/hh770425(v=wps.620).aspx http://technet.microsoft.com/en-us/library/hh770424.aspx http://technet.microsoft.com/en- us/library/hh770398.aspx http://technet.microsoft.com/en-us/library/hh770409.aspx

QUESTION 44Your network contains an Active Directory domain named contoso.com. The domain contains a server namedServer1 that runs Windows Server 2012.You need to ensure that a WIM file that is located on a network share is used as the installation source wheninstalling server roles and features on Server1. Which two actions should you perform? (Each correct answerpresents part of the solution. Choose two.)

A. Run the dism.exe command and specify the /remove-package parameter.B. Run the Remove-WindowsFeature cmdlet.C. Enable and configure the Specify settings for optional component installation and component repair policy

setting by using a Group Policy object (GPO).D. Enable the Enforce upgrade component rules policy setting by using a Group Policy object (GPO).E. Run the Remove-WindowsPackage cmdlet.


Explanation/Reference:Explanation:A: To remove packages from an offline image by using DISM Example:At a command prompt, specify the package identity to remove it from the image. You can remove multiplepackages on one command line.DISM /Image:C:\test\offline /Remove-Package/PackageName:Microsoft.Windows.Calc.Demo~6595b6144ccf1df~x86~en~1.0.0.0 /PackageName:Microsoft-Windows-MediaPlayerPackage~31bf3856ad364e35~x86~~6.1.6801.0C:* You can use Group Policy to specify a Windows image repair source to use within your network. The repairsource can be used to restore Windows features or to repair a corrupted Windows image.* Set Group PolicyYou can use Group Policy to specify when to use Windows Update, or a network location as a repair source forfeatures on demand and automatic corruption repair. To configure Group Policy for Feature on DemandOpen the group policy editor. For example, on a computer that is running Windows?8, click Search, clickSettings, type Edit Group Policy, and then select the Edit Group Policy setting. Click Computer Configuration,click Administrative Templates, click System, and then double-click the Specify settings for optional componentuninstallation and component repair setting. Select the settings that you want to use for Features on Demand.Note:* The Windows Imaging Format (WIM) is a file-based disk image format. It was developed by Microsoft to helpdeploy Windows Vista and subsequent versions of Windows operating system family, as well as Windows

Fundamentals for Legacy PCs.

"

QUESTION 45Your network contains an Active Directory forest. The forest contains two domains named contoso.com andfabrikam.com. The functional level of the forest is Windows Server 2003. You have a domain outside the forestnamed litwareinc.com. You need to configure an access solution to meet the following requirements:

* Users in litwareinc.com must be able to access resources on a server named Server1 in contoso.com.* Users in the contoso.com forest must be prevented from accessing any resources in litwareinc.com.* Users in litwareinc.com must be prevented from accessing any other resources in the contoso.com forest.


A. Configure SID filtering on the trust.B. Configure forest-wide authentication on the trust.C. Create a one-way forest trust.D. Create a one-way external trustE. Modify the permission on the Server1 object.F. Configure selective authentication on the trust.

Correct Answer: DEFSection: (none)Explanation

Explanation/Reference:Explanation:D (not C): litwareinc.com is outside the forest so we need an external trust (not a forest trust).E: Must grant the required permissions on Server1.F(not B): For external trust we must either select Domain-Wide or Selective Authentication (forst- wideauthentication is not an option)BCENote:* You can create an external trust to form a one-way or two-way, nontransitive trust with domains that areoutside your forest. External trusts are sometimes necessary when users need access to resources in aWindows NT 4.0 domain or in a domain that is located in a separate forest that is not joined by a forest trust./ To select the scope of authentication for users that are authenticating through a forest trust, click the foresttrust that you want to administer, and then click Properties . On the Authentication tab, click either Forest-wideauthentication or Selective authentication . / To select the scope of authentication for users that areauthenticating through an external trust, click the external trust that you want to administer, and then clickProperties . On the Authentication tab, click either Domain- wide authentication or Selective authentication .* The forest-wide authentication setting permits unrestricted access by any users in the trusted forest to allavailable shared resources in any of the domains in the trusting forest.* Forest-wide authentication is generally recommended for users within the same organization.Reference: Select the Scope of Authentication for Usershttp://technet.microsoft.com/en-us/library/cc776245(v=ws.10).aspx http://technet.microsoft.com/en-us/library/cc755844(v=ws.10).aspx

QUESTION 46Your network contains an Active Directory domain named contoso.com. The domain contains a file servernamed Server1 that runs Windows Server 2012. All client computers run Windows 8. You need to configure acustom Access Denied message that will be displayed to users when they are denied access to folders or fileson Server1.What should you configure?

A. A classification property

B. The File Server Resource Manager OptionsC. A file management taskD. A file screen template



QUESTION 47Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. Theforest contains three Active Directory sites named SiteA, SiteB, and SiteC. The sites contain four domaincontrollers. The domain controllers are configured as shown in the following table.

You discover that the users in SiteC are authenticated by the domain controllers in SiteA and SiteB. You needto ensure that the SiteC users are authenticated by the domain controllers in SiteB, unless all of the domaincontrollers in SiteB are unavailable. What should you do?

A. Create additional connection objects for DC3 and DC4.B. Decrease the cost of the site link between SiteB and SiteC.C. Create a site link bridge.D. Disable site link bridging.


Explanation/Reference:Explanation:By decreasing the cost between SiteB and SiteC, the SiteC users will be authenticated by SiteB domaincontrollers.Note:* A site link bridge connects two or more site links and enables transitivity between site links. Each site link in abridge must have a site in common with another site link in the bridge.* By default, all site links are transitive.

QUESTION 48Your network contains an Active Directory domain named contoso.com. The domain contains a. DC2 has theDHCP Server server role installed. DHCP is configured as shown in the exhibit. (Click the Exhibit button.)

You discover that client computers cannot obtain IPv4 addresses from DC2. You need to ensure that the clientcomputers can obtain IPv4 addresses from DC2. What should you do?

A. Disable the Deny filters.B. Enable the Allow filters.C. Authorize DC2.D. Restart the DHCP Server service



QUESTION 49Your network contains an Active Directory forest named adatum.com. All servers run Windows Server 2012.The domain contains four servers. The servers are configured as shown in the following table.

You need to deploy IP Address Management (IPAM) to manage DNS and DHCP. On which server should youinstall IPAM?

A. Server1B. Server2C. Server3D. Server4


Explanation/Reference:Explanation:D. IPAM cannot be installed on Domain Controllers. All other servers have the DC role http://technet.microsoft.com/en-us/library/hh831353.aspx


A. Active Directory Users and ComputersB. Server ManagerC. The Certificates snap-inD. The Certification Authority console


Explanation/Reference:Explanation:You can use the Certification Authority console to configure CAs. This includes the following tasks:(D) Scheduling certificate revocation list publication. Installing the CA certificate when necessary. Configuringexit module settings. Configuring policy module settings. Modifying security

permissions and delegate control of CAs. Enabling optional Netscape-compatible Web-based revocationchecking. Reference: Configure Certification Authorities

Exam E

QUESTION 1You have a server named Server1 that runs Windows Server 2012. When you install a custom Application onServer1 and restart the server, you receive the following error message: "The Boot Configuration Data file ismissing some required information.

You start Server1 by using Windows PE. You need to ensure that you can start Windows Server 2012 onServer1.Which tool should you use?

A. BootsectB. BootimC. BootrecD. Bootcfg



QUESTION 2Your network contains an Active Directory domain named contoso.com. The domain contains a server namedServer1 that runs Windows Server 2012. Server1 has the Active Directory Rights Management Services serverrole installed. Your company works with a partner organization that does not have its own Active DirectoryRights Management Services (AD RMS) implementation. You need to create a trust policy for the partnerorganization. The solution must meet the following requirements:Grant users in the partner organization access to protected content. Provide users in the partner organizationwith the ability to create protected content. Which type of trust policy should you create?

A. a federated trustB. Windows Live IDC. a trusted publishing domainD. a trusted user domain



QUESTION 3Hotspot QuestionYour network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012.The domain contains two domain controllers. The domain controllers are configured as shown in the followingtable.

On DC1, you create an Active Directory-integrated zone named Zone1. You verify that Zone1 replicates to DC2.You use DNSSEC to sign Zone1.You discover that the updates to Zone1 fail to replicate to DC2.You need to ensure that Zone1 replicates to DC2.What should you configure on DC1?To answer, select the appropriate tab in the answer area.

A.B.C.D.

Correct Answer: Section: (none)

Explanation


QUESTION 4Hotspot QuestionYour network contains two Hyper-V hosts that are configured as shown in the following table.

You create a virtual machine on Server1 named VM1.

You plan to export VM1 from Server1 and import VM1 to Server2. You need to ensure that you can start theimported copy of VM1 from snapshots.What should you configure on VM1?

To answer, select the appropriate node in the answer area.

A.B.

C.D.



Note:* If the CPUs are from the same manufacturer but not from the same type, you may need to use ProcessorCompatibility.*(incorrect) The network adapter is already disconnected.

QUESTION 5Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows

Server 2012. The domain contains two domain controllers. The domain controllers are configured as shown inthe following table.

You configure a user named User1 as a delegated administrator of DC10. You need to ensure that User1 canlog on to DC10 if the network link between the Main site and the Branch site fails.What should you do?

A. On DC10, run ntdsutil and configure the settings in the Roles context.B. On DC10, run ntdsutil and configure the settings in the Local Roles context.C. Modify the properties of the DCIO computer account.D. Run repadmin and specify /replsingleobject parameter.


Explanation/Reference:Explanation:Modify the following policy:Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment\Allow logon locallyNote:* User Rights Assignment policies determines which users or groups have logon rights or privileges on thecomputer.* Delegated administrator accounts gain local administrative permissions to the RODC. These users canoperate with privileges equivalent to the local computer's Administrators group. They are not members of theDomain Admins or the domain built-in Administrators groups. This option is useful for delegating branch officeadministration without giving out domain administrative permissions. Configuring delegation of administration isnot required.

QUESTION 6You have a server named Server1 that runs Windows Server 2012. You install the File and Storage Servicesserver role on Server1.From Windows Explorer, you view the properties of a folder named Folder1 and you discover that theClassification tab is missing. You need to ensure that you can assign classifications to Folder1 from WindowsExplorer manually.What should you do?

A. From Folder Options, clear Hide protected operating system files (Recommended).B. Install the File Server Resource Manager role service.C. From Folder Options, select the Always show menus.D. Install the Share and Storage Management Tools.



B. Classification Management is a feature of FSRMhttp://technet.microsoft.com/en-us/library/dd759252.aspx http://technet.microsoft.com/en- us/library/dd758759(v=WS.10).aspx

QUESTION 7Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. Theforest contains three Active Directory sites named SiteA, SiteB, and SiteC. The sites contain four domaincontrollers. The domain controllers are configured as shown in the following table.

An IP site link exits between each site.You discover that the users in SiteC are authenticated by the domain controllers in SiteA and SiteB. You needto ensure that the SiteC users are authenticated by the domain controllers in SiteB, unless all of the domaincontrollers in SiteB are unavailable.What should you do?

A. Create an SMTP site link between SiteB and SiteC.B. Create additional connection objects for DC3 and DC4.C. Decrease the cost of the site link between SiteB and SiteC.D. Create additional connection objects for DC1 and DC2.


Explanation/Reference:Explanation:By decreasing the site link cost between SiteB and SiteC the SiteC users would be authenticated by SiteBrather than by SiteA.

QUESTION 8Your network contains two servers named Server1 and Server2 that run Windows Server 2012. Server1 andServer2 have the Hyper-V server role installed. Server1 and Server2 are configured as Hyper-V replicas ofeach other. Server2 hosts a virtual machine named VM5. VM5 is replicated to Server1. You need to verifywhether the replica of VM5 on Server1 is functional. The solution must ensure that VM5 remains accessible toclients.What should you do from Hyper-V Manager?

A. On a server in Cluster2, click Migrate Roles.B. On a server in Cluster2, configure Cluster-Aware Updating.C. On a server in Cluster1, click Move Core Cluster Resources, and then click Select Node.D. On a server in Cluster1, configure Cluster-Aware Updating.


Explanation/Reference:Explanation:Note:

* Cluster-Aware Updating (CAU) is an automated feature that allows you to update clustered servers with littleor no loss in availability during the update process. During an Updating Run, CAU transparently performs thefollowing tasks:Puts each node of the cluster into node maintenance mode Moves the clustered roles off the node Installs theupdates and any dependent updatesPerforms a restart if necessaryBrings the node out of maintenance modeRestores the clustered roles on the nodeMoves to update the next nodeFor many clustered roles (formerly called clustered applications and services) in the cluster, the automaticupdate process triggers a planned failover, and it can cause a transient service interruption for connectedclients. However, in the case of continuously available workloads in Windows Server 2012, such as Hyper-Vwith live migration or file server with SMB Transparent Failover, CAU can coordinate cluster updates with noimpact to the service availability.

QUESTION 9Your network contains an Active Directory domain named contoso.com. The domain contains two memberservers named Server1 and Server2. All servers run Windows Server 2012. Server1 and Server2 have theFailover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1.Cluster1 has access to four physical disks. The disks are configured as shown in the following table.

You need to ensure that all of the disks can be added to a Cluster Shared Volume (CSV). Which two actionsshould you perform? (Each correct answer presents part of the solution. Choose two.)

A. Enable BitLocker on Disk4.B. Format Disk3 to use NTFS.C. Format Disk2 to use NTFS.D. Disable BitLocker on Disk1.

Correct Answer: BCSection: (none)Explanation

Explanation/Reference:Explanation:You cannot use a disk for a CSV that is formatted with FAT, FAT32, or Resilient File System (ReFS).

QUESTION 10Your network contains an Active Directory forest named contoso.com. The contoso.com domain only containsdomain controllers that run Windows Server 2012. The forest contains a child domain namedchild.contoso.com. The child.contoso.com domain only contains domain controllers that run Windows Server2008 R2. The child.contoso.com domain contains a member server named Server1 that runs Windows Server2012. You have access to four administrative user accounts in the forest. The administrative user accounts areconfigured as shown in the following table.

You need to ensure that you can add a domain controller that runs Windows Server 2012 to thechild.contoso.com domain. Which account should you use to run adprep.exe?

A. Admin1B. Admin2C. Admin3D. Admin4



QUESTION 11Your network contains an Active Directory domain named contoso.com. The domain contains two serversnamed Node1 and Node2. Node1 and Node2 run Windows Server 2012. Node1 and Node2 are configured asa two-node failover cluster named Cluster2. The computer accounts for all of the servers reside in anorganizational unit (OU) named Servers. A user named User1 is a member of the local Administrators group onNode1 and Node2. User1 creates a new clustered File Server role named File1 by using the File Server forgeneral use option. A report is generated during the creation of File1 as shown in the exhibit. (Click the Exhibitbutton.)

File1 fails to start.You need to ensure that you can start File1. What should you do?

A. Log on to the domain by using the built-in Administrator for the domain, and then recreate the clustered FileServer role by using the File Server for general use option.

B. Recreate the clustered File Server role by using the File Server for scale-out Application data option.C. Assign the computer account permissions of Cluster2 to the Servers OU.D. Assign the user account permissions of User1 to the Servers OU.E. Increase the value of the ms-DS-MachineAccountQuota attribute of the domain.



QUESTION 12Your network contains two servers named Server1 and Server 2. Both servers run Windows Server 2012 andhave the Hyper-V server role installed. Server1 hosts a virtual machine named VM1. The virtual machineconfiguration files and the virtual hard disks for VM1 are stored in D: \VM1.You shut down VM1 on Server1.You copy D:\VM1 to D:\VM1 on Server2.You need to start VM1 on Server2. You want to achieve this goal by using the minimum amount ofadministrative effort.What should you do?

A. Run the Import-VMIntialReplication cmdlet.B. Create a new virtual machine on Server2 and attach the VHD from VM1 to the new virtual machine.C. From Hyper-V Manager, run the Import Virtual Machine wizard.D. Run the Import-IscsiVirtualDisk cmdlet.



QUESTION 13Your network contains an Active Directory forest. The forest contains one domain named adatum.com. Thedomain contains three domain controllers. The domain controllers are configured as shown in the followingtable.

DC2 has all of the domain-wide operations master roles. DC3 has all of the forest-wide operation master roles.You need to ensure that you can use Password Settings objects (PSOs) in the domain.What should you do first?

A. Uninstall Active Directory from DC1.B. Change the domain functional level.C. Transfer the domain-wide operations master roles.D. Transfer the forest-wide operations master roles.



QUESTION 14Your network contains an Active Directory forest named contoso.com. The forest contains three domains. Alldomain controllers run Windows Server 2012. The forest has a two-way realm trust to a Kerberos realm namedadatum.com. You discover that users in adatum.com can only access resources in the root domain ofcontoso.com. You need to ensure that the adatum.com users can access the resources in all of the domains inthe forest.What should you do in the forest?

A. Delete the realm trust and create a forest trust.B. Delete the realm trust and create three external trusts.C. Modify the incoming realm trust.D. Modify the outgoing realm trust.



QUESTION 15Your network contains an Active Directory domain named contoso.com. The domain contains two domaincontrollers named DC1 and DC2 that run Windows Server 2012. DC1 and DC2 fail to replicate Active Directoryinformation. You confirm that DC1 and DC2 have network connectivity. The NTDS Settings of DC2 areconfigured as shown in the NTDS Settings exhibit. (Click tie Exhibit button.)

DNS is configured as shown in the DNS exhibit. (Click the Exhibit button.)


You need to ensure that DC1 and DC2 can replicate immediately. Which two actions should you perform?(Each correct answer presents part of the solution. Choose two.)

A. From DC1, restart the Netlogon service.B. From DC2, run nltest.exe /sync.C. From DC1, run ipconfig /flushdns.D. From DO, run repadmin /syncall.E. From DC2, run ipconfig /registerdns.F. From DC2, restart the Netlogon service.

Correct Answer: DESection: (none)Explanation

Explanation/Reference:Explanation:The DC2 name/alias is not available in DNS.First we register the DC2 name from DC with the ipcpnfig /registerdns. (E) Then we synchronizes a specifieddomain controller DC1 (DC2 would also work) with all of its replication partners with repadmin /syncall. (D)

QUESTION 16Your network contains an Active Directory domain named contoso.com. The domain contains two memberservers named Server1 and Server2. All servers run Windows Server 2012. Server1 and Server2 have theFailover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1.Cluster1 contains a Clustered Shared Volume (CSV). A developer creates an Application named App1. App1 isNOT a cluster-aware Application. App1 stores data in the file system. You need to ensure that App1 runs inCluster1. The solution must minimize development effort.Which cmdlet should you run?

A. Add-ClusterGenericServiceRoleB. Add-ClusterServerRoleC. Add-ClusterGenericApplicationRoleD. Add-ClusterScaleOutFileServerRole


Explanation/Reference:Explanation:* Add-ClusterGenericApplicationRoleConfigure high availability for an application that was not originally designed to run in a failover cluster.* If you run an application as a Generic Application, the cluster software will start the application, thenperiodically query the operating system to see whether the application appears to be running. If so, it ispresumed to be online, and will not be restarted or failed over.

QUESTION 17You have a server named Server1 that runs Windows Server 2012.You start Server1 by using Windows PE.You need to repair the Boot Configuration Data (BCD) store on Server1.Which tool should you use?

A. BootimB. BootsectC. BootrecD. Bootcfg



QUESTION 18Your network contains an Active Directory domain named contoso.com. The domain contains two memberservers named Server1 and Server2. All servers run Windows Server 2012. Server1 and Server2 have theFailover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1.Cluster1 contains a Clustered Shared Volume (CSV). A developer creates an application named Appl. App1 isNOT a cluster-aware application. App1 stores data in the file system. You need to ensure that App1 runs inCluster1. The solution must minimize development effort. Which cmdlet should you run?

A. Add-ClusterServerRoleB. Add-ClusterGenericServiceRoleC. Add ClusterScaleOutFileServerRoleD. Add ClusterGenericApplicationRole


Explanation/Reference:Explanation:* Add-ClusterGenericApplicationRole Configure high availability for an application that was not originallydesigned to run in a failover cluster.

* If you run an application as a Generic Application, the cluster software will start the application, thenperiodically query the operating system to see whether the application appears to be running. If so, it ispresumed to be online, and will not be restarted or failed over.

QUESTION 19Hotspot QuestionYour network contains three Application servers that run Windows Server 2012. The Application servers havethe Network Load Balancing (NLB) feature installed. You create an NLB cluster that contains the three servers.You plan to deploy an Application named App1 to the nodes in the cluster. App1 uses TCP port 8080 and TCPport 8081.Clients will connect to App1 by using HTTP and HTTPS. When clients connect to App1 by using HTTPS,session state information will be retained locally by the cluster node that responds to the client request.You need to configure a port rule for App1. Which port rule should you use? To answer, select the appropriaterule in the answer area.

A.B.C.D.



QUESTION 20Hotspot QuestionYour network contains an Active Directory domain named contoso.com. The domain contains two serversnamed Server1 and Server2 that run Windows Server 2012. The servers have the Hyper- V server roleinstalled.A certification authority (CA) is available on the network. A virtual machine named vml.contoso.com isreplicated from Server1 to Server2. A virtual machine named vm2.contoso.com is replicated from Server2 toServer1. You need to configure Hyper-V to encrypt the replication of the virtual machines.

Which common name should you use for the certificates on each server? To answer, configure the appropriatecommon name for the certificate on each server in the answer area.

A.B.C.D.



QUESTION 21Your network contains an Active Directory domain named contoso.com. The domain contains two memberservers named Server1 and Server2. All servers run Windows Server 2012. Server1 and Server2 have theFailover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1.Cluster1 contains a file server role named FS1 and a generic service role named SVC1. Server1 is thepreferred node for FS1. Server2 is the preferred node for SVC1. You plan to run a disk maintenance tool on thephysical disk used by FS1. You need to ensure that running the disk maintenance tool does not cause a failoverto occur. What should you do before you run the tool?

A. Run cluster.exe and specify the pause parameter.B. Run cluster.exe and specify the offline parameter.C. Run Suspend-ClusterResourceD. Run Suspend-ClusterNode.



QUESTION 22Your network contains an Active Directory domain named contoso.com. The domain contains two memberservers named Server1 and Server2. All servers run Windows Server 2012. Server1 and Server2 have theFailover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1.Cluster1 contains a Clustered Shared Volume (CSV). A developer creates an Application named App1. App1 isNOT a cluster-aware Application. App1 stores data in the file system. You need to ensure that App1 runs inCluster1. The solution must minimize development effort.Which cmdlet should you run?

A. Add-ClusterGenericApplicationRoleB. Add-ClusterGenericServiceRoleC. Add ClusterServerRoleD. Add-ClusterScaleOutFileServerRole



QUESTION 23Your network contains an Active Directory domain named contoso.com. The domain contains a server namedServer1 that runs Windows Server 2012. Server1 is an enterprise root certification authority (CA) forcontoso.com. Your user account is assigned the certificate manager role and the auditor role on thecontoso.com CA. Your account is a member of the local Administrators group on Server1. You enable CA roleseparation on Server1.You need to ensure that you can manage the certificates on the CA. What should you do?

A. Remove your user account from the local Administrators group.B. Assign the CA administrator role to your user account.C. Assign your user account the Bypass traverse checking user right.D. Remove your user account from the Manage auditing and security log user right.



QUESTION 24Your network contains an Active Directory domain named contoso.com. The domain contains a server named

Server1 that runs Windows Server 2012 and has the DHCP Server server roleinstalled. An administrator installs the IP Address Management (IPAM) Server feature on a server namedServer2. The administrator configures IPAM by using Group Policy based provisioning and starts serverdiscovery. You plan to create Group Policies for IPAM provisioning. You need to identify which Group Policyobject (GPO) name prefix must be used for IPAM Group Policies.What should you do on Server2?

A. From Server Manager, review the IPAM overview.B. Run the ipamgc.exe tool.C. From Task Scheduler, review the IPAM tasks.D. Run the Get-IpamConfiguration cmdlet.



QUESTION 25Your network contains an Active Directory domain named contoso.com. The domain contains a server namedServer1 that runs Windows Server 2012. The system properties of Server1 are shown in the exhibit. (Click theExhibit button.)

You need to configure Server1 as an enterprise subordinate certification authority (CA). What should you dofirst?

A. Add RAM to the server.B. Set the Startup Type of the Certificate Propagation service to Automatic.C. Install the Certification Authority Web Enrollment role service.


D. Join Server1 to the contoso.com domain.



QUESTION 26Drag and Drop QuestionYour network contains an Active Directory domain named contoso.com. The domain contains four memberservers named Server1, Server2, Server3, and Server4. Server1 and 5erver2 run Windows Server 2008 R2.Server1 and Server2 have the Hyper-V server role and the Failover Clustering feature installed. Failover

Clustering is configured to provide highly available virtual machines by using a cluster named Cluster1. Cluster1hosts 10 virtual machines.Server3 and Server4 run Windows Server 2012.You install the Hyper-V server role and the Failover Clustering feature on Server3 and Server4.You create a cluster named Cluster2.You need to migrate cluster resources from Cluster1 to Cluster2. The solution must minimize downtime on thevirtual machines.Which five actions should you perform?To answer, move the appropriate five actions from the list of actions to the answer area and arrange them inthe correct order.

A.B.C.D.



Explanation:Migrate a Cluster WizardBox 1: Shut down all of the virtual machines in Cluster1.Box 2: Unmask the shared storage to present the storage to Cluster2. Box 3: Mask the shared storage toprevent the storage from being accessed by Cluster1.Box 4: Start the virtual machines in Cluster2.Box 5: From the Failover Cluster Manager in Cluster1, run the Migrate a Cluster Wizard.Note:* The new cluster roles are always created offline - when VMs and users are ready, the following steps shouldbe used during a maintenance window:i. The source VMs should be shut down and turned off.ii. The source cluster CSV volumes that have been migrated should be off-lined. iii. The storage that is commonto both clusters (LUNS) should be masked (hidden) from the source cluster, to prevent accidental usage byboth clusters.iv. The storage that is common to both clusters (LUNS) should be presented to the new cluster. v.The CSV volumes on the target cluster should be on-lined.vi. The VMs on the target cluster should be on-lined.vii. VMs are migrated and ready for use!* Now that the target cluster has been pre-staged, use the following steps during a maintenance window to cutover to the new Windows Server 2012 cluster:

QUESTION 27Shutdown all VMs on the source Windows Server 2008 R2 cluster that have been migrated.

A.B.C.D.



QUESTION 28Configure the storage:

A. Unmask the common shared storage (LUNs) so that they are not presented to the Windows Server 2008R2source clusterNote: Data could become corrupt if they are presented to multiple clusters at the same time. b. Mask thecommon shared storage (LUNs) to the Windows Server 2012 target cluster.



QUESTION 29Your network contains an Active Directory domain named contoso.com. The domain contains two memberservers named Server1 and Server2. All servers run Windows Server 2012. Server1 and Server2 have theFailover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1.Cluster1 has access to four physical disks. The disks are configured as shown in the following table.

You need to identify which disk can be added to a Clustered Storage Space in Cluster1. Which disk should youidentify?

A. Disk1B. Disk2C. Disk3D. Disk4



QUESTION 30You have a server named Server1 that runs Windows Server 2012. Server1 has the File Server ResourceManager role service installed. You attempt to delete a classification property and you receive the errormessage as shown in the exhibit. (Click the Exhibit button.)

You need to delete the is Confidential classification property. What should you do?

A. Delete the classification rule that is assigned the isConfidential classification property.B. Disable the classification rule that is assigned the isConfidential classification property.C. Set files that have an isConfidential classification property value of Yes to No.D. Clear the isConfidential classification property value of all files.



QUESTION 31You have a server named Server1 that runs Windows Server 2012. Windows Server 2012 is installed onvolume C. You need to ensure that Safe Mode with Command Prompt loads the next time Server1 restarts.Which tool should you use?

A. The Restart-Server cmdletB. The Bootcfg commandC. The Restart-Computer cmdletD. The Bcdedit command



QUESTION 32You have a failover cluster named Cluster1 that contains four nodes. All of the nodes run Windows Server2012. You need to schedule the installation of Windows updates on the cluster nodes. Which tool should youuse?

A. The Wusa command

B. The Invoke-CauScan cmdletC. The Add-CauClusterRole cmdletD. The Wuauclt command



QUESTION 33You have a server named Server1 that runs Windows Server 2012. You download and install the WindowsAzure Online Backup Service Agent on Server1. You need to ensure that you can configure an online backupfrom Windows Server Backup. What should you do first?

A. From Windows Server Backup, run the Register Server Wizard.B. From Computer Management, add the Server1 computer account to the Backup Operators group.C. From a command prompt, run wbadmin.exe enable backup.D. From the Services console, modify the Log On settings of the Windows Azure Online Backup Service

Agent.


Explanation/Reference:Explanation:A. Enables you to back up and restore your operating system, volumes, files, folders, and applications from acommand prompt.B. To register a server for use with Windows Azure Backup you must run the register server wizard http://technet.microsoft.com/en-us/library/hh831677.aspx

QUESTION 34Your network contains an Active Directory forest named contoso.com. The forest contains two domains namedcontoso.com and childl.contoso.com. The domains contain three domain controllers. The domain controllersare configured as shown in the following table.

You need to ensure that the KDC support for claims, compound authentication, and kerberos armoring settingis enforced in the child1.contoso.com domain. Which two actions should you perform? (Each correct answerpresents part of the solution. Choose two.)

A. Upgrade DC1 to Windows Server 2012.

B. Upgrade DC11 to Windows Server 2012.C. Raise the domain functional level ofchildl.contoso.com.D. Raise the domain functional level of contoso.com.E. Raise the forest functional level of contoso.com.


Explanation/Reference:Explanation:If you want to create access control based on claims and compound authentication, you need to deployDynamic Access Control. This requires that you upgrade to Kerberos clients and use the KDC, which supportthese new authorization types. With Windows Server 2012, you do not have to wait until all the domaincontrollers and the domain functional level are upgraded to take advantage of new access control optionshttp://technet.microsoft.com/en-us/library/hh831747.aspx.


DC1 hosts an Active Directory-integrated zone for contoso.com. You add the DNS Server server role to DC2.You discover that the contoso.com DNS zone fails to replicate to DC2. You verify that the domain, schema, andconfiguration naming contexts replicate from DC1 to DC2. You need to ensure that DC2 replicates thecontoso.com zone by using Active Directory replication. Which tool should you use?

A. Active Directory Domains and TrustsB. Active Directory Users and ComputersC. RepadminD. Ntdsutil


Explanation/Reference:Explanation:Repadmin.exe is a command line tool that is designed to assist administrators in diagnosing, monitoring, andtroubleshooting Active Directory replication problems. Reference: Repadmin Introduction and TechnologyOverview

QUESTION 36Your network contains an Active Directory domain named contoso.com. The domain contains a main office anda branch office. An Active Directory site exists for each office. All domain controllers run Windows Server 2012.

The domain contains two domain controllers. The domain controllers are configured as shown in the followingtable.

DC1 hosts an Active Directory-integrated zone for contoso.com. You add the DNS Server server role to DC2.You discover that the contoso.com DNS zone fails to replicate to DC2. You verify that the domain, schema, andconfiguration naming contexts replicate from DC1 to DC2. You need to ensure that DC2 replicates thecontoso.com zone by using Active Directory replication. Which tool should you use?

A. Active Directory Users and ComputersB. NtdsutilC. DNS ManagerD. Active Directory Domains and Trusts


Explanation/Reference:Explanation:The primary tool that you use to manage DNS servers is DNS Manager, the DNS snap-in in MicrosoftManagement Console (MMC), which appears as DNS in Administrative Tools on the Start menu. You can useDNS Manager along with other snapins in MMC, further integrating DNS administration into your total networkmanagement. It is also available in Server Manager on computers with the DNS Server role installed. You canuse DNS Manager to perform the following basic administrative server tasks:*Performing initial configuration of a new DNS server.*Connecting to and managing a local DNS server on the same computer or remote DNS servers on othercomputers.*


Adding and removing forward and reverse lookup zones, as necessary.*Adding, removing, and updating resource records in zones.*Modifying how zones are stored and replicated between servers.*Modifying how servers process queries and handle dynamic updates.Modifyingsecurity for specific zones or resource records.In addition, you can also use DNS Manager to perform the following tasks:*Perform maintenance on the server. You can start, stop, pause, or resume the server or manually updateserver data files.*

Monitor the contents of the server cache and, as necessary, clear it.*Tune advanced server options.Configure and perform aging and scavenging of stale resource records that are stored by the server.Reference: DNS Tools


The Branch site contains a perimeter network. For security reasons, client computers in the perimeter networkcan communicate with client computers in the Branch site only. You plan to deploy a new RODC to theperimeter network in the Branch site. You need to ensure that the new RODC will be able to replicate fromDC10. What should you do first on DC10?

A. Run dcpromo and specify the /createdcaccount parameter.B. Run the Active Directory Domain Services Configuration Wizard.C. Run the Add-ADDSReadOnlyDomainControllerAccount cmdlet.D. Enable the Bridge all site links setting.


Explanation/Reference:Explanation:Creates a read-only domain controller (RODC) account that can be used to install an RODC in Active Directory.Note:* NotesOnce you have added the RODC account, you can add an RODC to a server computer by using the Install-ADDSDomainController cmdlet with the -ReadOnlyReplica switch parameter.* ExampleAdds a new read-only domain controller (RODC) account to the corp.contoso.com domain using the NorthAmerica site as the source site for the replication source domain controller.C:\PS>Add-ADDSReadOnlyDomainControllerAccount -DomainControllerAccountName RODC1 -


DomainName corp.contoso.com -SiteName NorthAmericaReference: Add-ADDSReadOnlyDomainControllerAccount

QUESTION 38Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012.The domain contains a domain controller named DC1 that is configured as an enterprise root certificationauthority (CA). All users in the domain are issued a smart card and are required to log on to their domainjoinedclient computer by using their smart card. A user named User1 resigned and started to work for a competingcompany. You need to prevent User1 immediately from logging on to any computer in the domain. The solutionmust not prevent other users from logging on to the domain. Which tool should you use?

A. The Security Configuration WizardB. The Certification Authority consoleC. Active Directory Administrative CenterD. Certificate Templates


Explanation/Reference:Explanation:You can use the Certification Authority console to configure CAs. This includes the following tasks:(B) Scheduling certificate revocation list publication.Installing the CA certificate when necessary.Configuring exit module settings.Configuring policy module settings.Modifying security permissions and delegate control of CAs. Enabling optional Netscape- compatible Web-based revocation checking.Reference: Configure Certification Authorities

QUESTION 39You have a server named Server1 that runs Windows Server 2012. Server1 has the DNS Server server roleinstalled. You need to store the contents of all the DNS queries received by Server1.What should you configure?

A. Logging from Windows Firewall with Advanced SecurityB. Debug logging from DNS ManagerC. A Data Collector Set (DCS) from Performance MonitorD. Monitoring from DNS Manager


Explanation/Reference:Explanation:The following DNS debug logging options are available:* Direction of packetsSend Packets sent by the DNS server are logged in the DNS server log file. Receive Packets received by theDNS server are logged in the log file.* Content of packets(D) Standard queries Specifies that packets containing standard queries (per RFC 1034) are logged in the DNSserver log file.Updates Specifies that packets containing dynamic updates (per RFC 2136) are logged in the DNS server logfile.Notifies Specifies that packets containing notifications (per RFC 1996) are logged in the DNS server log file.Etc.

Reference: Using server debug logging options

QUESTION 40You have a server named LON-DC1 that runs Windows Server 2012. An iSCSI virtual disk namedVirtuahSCSIl.vhd exists on LON-DC1 as shown in the exhibit. (Click the Exhibit button.)

You create a new iSCSI virtual disk named VirtualiSCSI2.vhd by using the existing itgt iSCSI target.VirtuahSCSI1.vhd is removed from LON-DC1. You need to assign VirtualiSCSI2.vhd a logical unit value of 0.What should you do?

A. Run the Set-IscsiVirtualDisk cmdlet and specify the -DevicePath parameter.B. Run the iscsicpl command and specify the virtualdisklun parameter.C. Modify the properties of the itgt ISCSI target.D. Run the Set-VirtualDisk cmdlet and specify the -Uniqueld parameter.


Explanation/Reference:Explanation:Set-VirtualDiskModifies the attributes of an existing virtual disk.Applies To: Windows Server 2012-UniqueId<String>Specifies an ID used to uniquely identify a Disk object in the system. The ID persists through restarts. Note:Logical unit numbers (LUNs) created on an iSCSI disk storage subsystem are not directly assigned to a server.For iSCSI, LUNs are assigned to logical entities called targets.Incorrect:Not A: Set-IscsiVirtualDiskModifies the settings for the specified iSCSI virtual disk.-Path<String> (alias: DevicePath)Specifies the path of the virtual hard disk (VHD) file that is associated with the iSCSI virtual disk. Filter theiSCSI Virtual Disk object using this parameter. Not B: iscsicpl.exe could is the Microsoft iSCSI InitiatorConfiguration Tool. Microsoft Internet iSCSI Initiator enables you to connect a host computer that is runningWindows 7 or Windows Server 2008 R2 to an external iSCSI-based storage array through an Ethernet


network adapter.

QUESTION 41

You have a Hyper-V host named Server1 that runs Windows Server 2012. Server1 contains a virtual machinenamed VM1 that runs Windows Server 2012. You fail to start VM1 and you suspect that the boot files on VM1are corrupt. On Server1, you attach the virtual hard disk (VHD) of VM1 and you assign the VHD a drive letter ofF. You need to repair the corrupt boot files on VM1. What should you run?

A. bootrec.exe /rebuildbcdB. bootrec.exe /scanosC. bcdboot.exe f:\windows /s c:D. bcdboot.exe c:\windows /s f:



QUESTION 42Your network contains an Active Directory domain named contoso.com. The domain contains a server namedServer1 that runs Windows Server 2012 and has the DNS Server server role installed. Server1 has a zonenamed contoso.com. The zone is configured as shown in the exhibit. (Click the Exhibit button.)

You need to assign a user named User1 permission to add and delete records from thecontoso.com zone only. What should you do first?

A. Enable the Advanced view from DNS Manager.B. Add User1 to the DnsUpdateProxy group.

C. Run the New Delegation Wizard.D. Configure the zone to be Active Directory-integrated.



QUESTION 43Your network contains two servers named Server1 and Server2 that run Windows Server 2008 R2. Server1and Server2 are nodes in a failover cluster named Cluster1. The network contains two servers named Server3and Server4 that run Windows Server 2012. Server3 and Server4 are nodes in a failover cluster namedCluster2. You need to move all of the applications and the services from Cluster1 to Cluster2. What should youdo first from Failover Cluster Manager?

A. On a server in Cluster1, click Move Core Cluster Resources, and then click Select Node.B. On a server in Cluster2, configure Cluster-Aware Updating.C. On a server in Cluster1, configure Cluster-Aware Updating.D. On a server in Cluster2, click Migrate Roles.



QUESTION 44Your network contains two servers named HV1 and HV2. Both servers run Windows Server 2012 and have theHyper-V server role installed. HV1 hosts 25 virtual machines. The virtual machine configuration files and thevirtual hard disks are stored in D:\VM. You shut down all of the virtual machines on HV1. You copy D:\VM to D:\VM on HV2. You need to start all of the virtual machines on HV2. You want to achieve this goal by using theminimum amount of administrative effort. What should you do?

A. Run the Import-VMInitialReplication cmdlet.B. From HV1, export all virtual machines to D:\VM.

Copy D:\VM to D:\VM on HV2 and overwrite the existing files.On HV2, run the Import Virtual Machine wizard.

C. From HV1, export all virtual machines to D:\VM.Copy D:\VM to D:\VM on HV2 and overwrite the existing files.On HV2, run the New Virtual Machine wizard.

D. Run the Import-VM cmdlet.



QUESTION 45Your company recently deployed a new Active Directory forest named contoso.com. The first domain controllerin the forest runs Windows Server 2012. You need to identify the time-to-live (TTL) value for domain referrals tothe NETLOGON and SYSVOL shared folders. Which tool should you use?

A. UltrasoundB. ReplmonC. DfsdiagD. Frsutil



QUESTION 46Your network contains an Active Directory domain named contoso.com. The domain contains two memberservers named Server1 and Server2 that run Windows Server 2012. Server1 has Microsoft SQL Server 2012installed. You install the Active Directory Federation Services server role on Server2. You need to configureServer2 as the first Active Directory Federation Services (AD FS) server in the domain. The solution mustensure that the AD FS database is stored in a SQL Server database on Server1. What should you do onServer2?

A. From the AD FS console, run the AD FS Federation Server Configuration Wizard and select the Stand-alone federation server option.

B. From Server Manager, install the Federation Service Proxy.C. From Windows PowerShell, run Install-ADFSFarm.D. From Server Manager, install the AD FS Web Agents.


Explanation/Reference:Explanation:To create the first federation server in a federation server farm There are two ways to start the AD FSFederation Server Configuration Wizard. On the Welcome page, verify that Create a new Federation Service isselected, and then click Next. On the Select Stand-Alone or Farm Deployment page, click New federationserver farm, and then click Next. On the Specify the Federation Service Name page, verify that the SSLcertificate that is showing is correct. If this is not the correct certificate, select the appropriate certificate fromthe SSL certificate list.Etc.Note:After you install the Federation Service role service and configure the required certificates on a computer, youare ready to configure the computer to become a federation server. You can use the following procedure to setup the computer to become the first federation server in a new federation server farm using the AD FSFederation Server Configuration Wizard. The act of creating the first federation server in a farm also creates anew Federation Service and makes this computer the primary federation server. This means that this computerwill be configured with a read/write copy of the AD FS configuration database. All other federation servers inthis farm must replicate any changes that are made on the primary federation server to their read-only copies ofthe AD FS configuration database that they store locally. Reference: To create the first federation server in afederation server farm

QUESTION 47Your network contains two servers that run Windows Server 2012 named Server1 and Server2. Both servershave the File Server role service installed. On Server2, you create a share named Backups. From WindowsServer Backup on Server1, you schedule a full backup to run every night.You set the backup destination to \\Server2 \Backups.After several weeks, you discover that \\Server2\Backups only contains the last backup that completed onServer1. You need to ensure that multiple backups of Server1 are maintained. What should you do?

A. Modify the Volume Shadow Copy Service (VSS) settings.B. Modify the properties of the Windows Store Service (WSService) service.C. Change the backup destination,D. Configure the permission of the Backups share.



QUESTION 48Your network contains an Active Directory domain named contoso.com. The domain contains a server namedServer1 that runs Windows Server 2012. Server1 has an enterprise root certification authority (CA) forcontoso.com. You deploy another member server named Server2 that runs Windows Server 2012 and has theWeb Server (IIS) server role installed. You need to designate a website on Server1 as the certificate revocationlist (CRL) distribution point for the C A. The solution must ensure that CRLs are published automatically toServer2. Which two actions should you perform? (Each correct answer presents part of the solution. Choosetwo.)

A. Create an http:// CRL distribution point (CDP) entry.B. Configure a CA exit module.C. Create a file:// CRL distribution point (CDP) entryD. Configure an enrollment agent.E. Configure a CA policy module.

Correct Answer: AESection: (none)Explanation

Explanation/Reference:Explanation:A: To specify CRL distribution points in issued certificates Open the Certification Authority snap-in.In the console tree, click the name of the CA.On the Action menu, click Properties , and then click the Extensions tab. Confirm that Select extension is set toCRL Distribution Point (CDP) .Do one or more of the following. (The list of CRL distribution points is in the Specify locations from which userscan obtain a certificate revocation list (CRL) box.) / To indicate that you want to use a URL as a CRLdistribution point Click the CRL distribution point, select the Include in the CDP extension of issued certificatescheck box, and then click OK . Click Yes to stop and restart Active Directory Certificate Services (AD CS).E: You can specify CRL Distribution Points (CDPs) in CAPolicy.inf. Note that any CDP in CAPolicy.inf will takeprecedence for certificate verifiers over the CDP's specified in the CA policy module.Note:CRLDistributionPointYou can specify CRL Distribution Points (CDPs) for a root CA certificate in the CAPolicy.inf. This section doesnot configure the CDP for the CA itself. After the CA has been installed you can configure the CDP URLs thatthe CA will include in each certificate that it issues. The URLs specified in this section of the CAPolicy.inf file areincluded in the root CA certificate itself.Example:[CRLDistributionPoint]URL=http://pki.wingtiptoys.com/cdp/WingtipToysRootCA.crl

QUESTION 49Your network contains an Active Directory domain named adatum.com. You create a new Group Policy object(GPO) named GPO1. You need to verify that GPO1 was replicated to all of the domain controllers. Which toolshould you use?

A. GpupdateB. GpresultC. Group Policy ManagementD. Active Directory Sites and Services


Explanation/Reference:"First Test, First Pass" - www.lead2pass.com 217About Lead2pass.com

Lead2pass.com was founded in 2006. We provide latest & high quality IT Certification Training ExamQuestions, Study Guides, Practice Tests. Lead the way to help you pass any IT Certification exams, 100%Pass Guaranteed or Full Refund. Especially Cisco, CompTIA, Citrix, EMC, HP, Oracle, VMware, Juniper,Check Point, LPI, Nortel, EXIN and so on.

Help you to pass any IT Certification exams at the first try.

You can reach us at any of the email addresses listed below.

Sales: [email protected]

Support: [email protected]

Technical Assistance Center: [email protected]

Any problems about IT certification or our products, you could rely upon us, we will give you satisfactoryanswers in 24 hours.


Documents

Microsoft.Certkey.70-412.v2013-10-22.by.AWAIS · QUESTION 7 Your network contains an Active Directory domain named contoso.com. The domain contains three servers named Server1, Server2,