SBS COMPLIMENTARY PRODUCT SOLUTIONS

Base Sheet Membrane Fasteners1.2” BSF Fastener1.7” BSF Fastener

SOPRAFIX® FASTENERS#14 SOPRAFIX Fasteners & Pre-Assembled (1” to 12”)#15 SOPRAFIX Fasteners & Pre-Assembled (1” to 28”)SOPRAFIX 2” seam plateSOPRAFIX 2.4” seam plateSOPRAFIX Metal Batten Bar

TRI-FIXXTRI-FIXX fasteners (nails & plates)

TRI-FIXX GUN Provides efficient and safe installation of TRI-FIXX mechanically attached roofing installations.

ALSAN® FLASHINGA patented polyurethane/bitumen resin, single-component and moisture-curing compound used in SOPREMA roofing and waterproofing flashing applications.

ALSAN® RS 260 LO FLASHALSAN RS 260 LO Flash is a low odor, rapid-curing, proprietary formulation polymethacrylate (PMA) liquid resin. ALSAN RS 260 LO Flash is combined with ALSAN RS Fleece reinforcing fabric to form a flexible and monolithic, reinforced membrane used in SOPREMA roofing and waterproofing flashing applications.

ALSAN® RS 230 FLASHALSAN RS 230 Flash is a rapid-curing, proprietary formulation polymethyl methacrylate (PMMA) liquid resin. ALSAN RS 230 Flash is combined with ALSAN RS Fleece reinforcing fabric to form a flexible monolithic, reinforced membrane used in SOPREMA roofing and waterproofing flashing applications.

COLPLY ADHESIVE VOC compliant, polymer modified cold process membrane adhesive for use with SOPREMA SBS-modified bitumen membranes.

COLPLY MODIFIED ADHESIVE VOC compliant, premium polymer modified cold process membrane adhesive.

COPLY EF ADHESIVEIdeal when odor and solvent must be eliminated from the jobsite. COLPLY EF Adhesive is a low odor, single-component polymer modified membrane adhesive specifically formulated for SOPREMA sand-surfaced SBS-modified bitumen plies. Upon curing, COLPLY EF provides additional layers of elastomeric waterproofing protection between plies.

COLPLY FLASHING CEMENTVOC compliant asphalt roofing flashing cement, specifically formulated for SOPREMA sand-surfaced modified bitumen flashing plies.

COPLY MODIFIED FLASHING CEMENTVOC compliant premium polymer modified cold process flashing cement. Required for use with SOPRASTAR sanded cap sheet.

COPLY EF FLASHING CEMENTIdeal when odor and solvent must be eliminated from the jobsite. COLPLY EF is a low odor, single-component polymer modified flashing cement specifically formulated for SOPREMA sand-surfaced SBS-modified bitumen plies.

SOPRAMASTIC SBS ELASTIC CEMENTSolvent and SBS-modified bitumen based mastic ideal for use with bituminous roofing and waterproofing membranes as seam mastic, caulking material, and joint filler.

SOPRAMASTIC SP1A solvent-free, extremely low VOC, moisture curing sealant designed for applications where joint movement is necessary. SP-1 will not shrink upon curing, will not discolor when exposed to UV light, and creates a tight seal between dissimilar materials.

DUOTACK® 365Low-rise, two-part urethane insulation adhesive. DUOTACK 365 is used to adhere insulation boards to various substrates, adhering multiple layers of insulation boards, and various cover boards including SOPRABOARD.

ELASTOCOL 350Low VOC, water-based primer to prepare surfaces before the installation of thermofusible membranes.

ELASTOCOL 500Fast drying, solvent-based asphalt primer for heat welding, hot asphalt and cold-adhesive membrane applications.

ELASTOCOL STICKSolvent based, high-tack primer designed for self-adhered membrane applications.

ELASTOCOL STICK ZEROVOC compliant, high-tack primer designed for self-adhered membrane applications.

ELASTOCOL STICK H2OPolymer emulsion-based primer designed for self-adhered membrane applications.

SOPRABOARD®

SOPRASMARTTM BOARD 180SBS modified bitumen membrane with a non-woven polyester reinforcement, factory laminated on a semi-rigid asphaltic board.

SOPRASMARTTM ISO HD 180SBS modified bitumen membrane with a non-woven polyester reinforcement, factory laminated to a high density polyisocyanurate insulation board.

SOPRASMARTTM XP HD SBS modified bitumen membrane with a non-woven polyester reinforcement, factory laminated on a high-density mineral wool panel.

SOPRASMARTTM XP ISO SBS modified bitumen membrane with a non-woven polyester reinforcement factory-laminated to a mineral wool and polyisocyanurate insulation panel.

Premium, lightweight, high strength, semi-rigid asphalt-based cov-erboard. SOPRABOARD is dimensionally stable, is not susceptible to high moisture conditions, and the bituminous surface provides an ideal substrate for monolithic adhesion to SBS membranes.

C O V E R B O A R D P R I M E R S

A D H E S I V E S , C E M E N T S , & S E A L A N T S

F A S T E N E R S

A C C E S S O R I E S

L A M I N A T E D C O V E R B O A R D

SOPRAVAP’RSelf-adhered, SBS-modified bitumen vapor barrier protected by a tri-laminate woven polyethylene top surface. SOPRALENE 180 PS 2.2SBS modified bitumen sheet with a sanded bottomand a thermoplastic film on top.

SOPRALENE 180 SANDEDSBS modified bitumen sheet with a polyesterreinforcement and sanded top and bottom.

MODIFIED SOPRA GPolymer modified fiberglass base sheet meeting and/or exceeding ASTM 4601, Type II and G2 standards. Modified SOPRA G is used as an anchor sheet for heat welded, cold adhesive, or hot applied roofing and waterproofing assemblies.

SOPRA-ISOClosed cell polyisocyanurate foam core bonded to organic reinforced facers.

SOPRA-ISO+Closed cell polyisocyanurate foam core bonded to inorganic coated glass fiber reinforced facers.

SOPRAROCK DDRigid mineral wool support panel with duel density technol-ogy; high density upper surface provides rigid substrate.

SOPRAROCK DD PLUSRigid mineral wool support panel with duel density technol-ogy; bitumen impregnated high density upper surface provides rigid substrate.

S B S V A P O R R E T A R D E R

I N S U L A T I O N

L I Q U I D A P P L I E D F L A S H I N G S

SOPRAJOINTSBS-modified bitumen expansion joint membrane for use in approved multi-ply membrane assemblies.

SOPRASPHALTSEBS-modified asphalt used to adhere SBS-modified bitumen membranes.

SOPRALAPSBS-modifed bitumen cover strip designed to seal the end laps of SOPREMA products.

SOPRASLOPEAcrylic modified cementicious sloping material designed to create positive slop on traditional low slope roofs. SS

1000

4-RE

V. 7.

2018

QUICK GUIDE WAT

ERPR

OOFI

NG

ROOFINGSBS MODIFIED BITUMEN MEMBRANES

CAP PLY OPTIONS

CAP APPLICATION METHOD CAP PLY PRODUCT ASTM STANDARDELASTOPHENE® FR GR

ASTM D6163ELASTOPHENE® HR FR GR

SOPRALENE® 180 FR GRASTM D6164

SOPRALENE® 250 FR GR

SOPRASTAR® SandedASTM D6162

ELASTOPHENE® HS FR GR

CAP APPLICATION METHOD CAP PLY PRODUCT ASTM STANDARDELASTOPHENE® Flam FR GR

ASTM D6163ELASTOPHENE® Flam HR FR GR

SOPRALENE® Flam 180 FR GRASTM D6164

SOPRALENE® Flam 250 FR GR

SOPRASTAR® Flam ASTM D6162

ELASTOPHENE® Flam HS FR GR

CAP APPLICATION METHOD CAP PLY PRODUCT ASTM STANDARDELASTOPHENE® FR GR

ASTM D6163ELASTOPHENE® HR FR GR

SOPRALENE® 180 FR GRASTM D6164

SOPRALENE® 250 FR GR

SOPRASTAR® SandedASTM D6162

ELASTOPHENE® HS FR GR

CAP APPLICATION METHOD CAP PLY PRODUCT ASTM STANDARD

ELASTOPHENE® Stick FR GR

ASTM D6163

ELASTOPHENE® Stick HR FR GR

BASE PLY OPTIONS

BASE APPLICATION METHOD BASE PLY PRODUCT ASTM STANDARD CAP APPLICATION METHODSELASTOPHENE® Sanded

ASTM D6163ELASTOPHENE® HR Sanded

SOPRALENE® 180 SandedASTM D6164

SOPRALENE® 250 Sanded

ELASTOPHENE® HS Sanded ASTM D6162

BASE APPLICATION METHOD BASE PLY PRODUCT ASTM STANDARD CAP APPLICATION METHODSCOLVENT® TG ASTM D6163

ELASTOPHENE® SP

SOPRALENE® 180 SPASTM D6164

COLVENT® 180 TG

ELASTOPHENE® Flam HRASTM D6163

COLVENT® Flam TG

SOPRALENE® Flam 180

ASTM D6164SOPRALENE® Flam 250

COLVENT® Flam 180 TG

ELASTOPHENE® Flam HS ASTM D6162

BASE APPLICATION METHOD BASE PLY PRODUCT ASTM STANDARD CAP APPLICATION METHODS

ELASTOPHENE® SandedASTM D6163

ELASTOPHENE® HR Sanded

SOPRALENE® 180 SandedASTM D6164

SOPRALENE® 250 Sanded

ELASTOPHENE® HS Sanded ASTM D6162

BASE APPLICATION METHOD BASE PLY PRODUCT ASTM STANDARD CAP APPLICATION METHODS

SOPRAFIX® Base 612

ASTM D6164

SOPRAFIX® Base 613

SOPRAFIX® Base 614

SOPRAFIX® Base 622

SOPRAFIX® Base 641

BASE APPLICATION METHOD BASE PLY PRODUCT ASTM STANDARD CAP APPLICATION METHODSCOLVENT® SA

ASTM D6163ELASTOPHENE® Stick

SOPRALENE® StickASTM D6164

COLVENT® 180 SA

COLVENT® Flam SAASTM D6163

ELASTOPHENE® Flam Stick

SOPRALENE® Flam StickASTM D6164

COLVENT® Flam 180 SA

COLD ADHESIVE

HEAT WELDED

HOT ASPHALT

MECHANICALLY FASTENED

SELF-ADHERED

SBS MEMBRANE SYSTEMSBASE & CAP PLY OPTIONS

REINFORCEMENTS

A S T MS T A N D A R D

D E S C R I P T I O N T Y P E A N D G R A D E

ASTM D6163Standard Specification for SBS Modified

Bitumen Sheet Materials using Glass Fiber Reinforcements

Grade S or GType I, Type II

ASTM D6164Standard Specification for SBS Modified Bitumen Sheet Materials using Polyester

Reinforcements

Grade S or GType I,Type II

ASTM D6162

Standard Specification for SBS Modified Bitumen Sheet Materials using a

combination of Polyester & Glass Fiber Reinforcement

Grade S or GType I, Type III

ELASTOPHENE FR+ GR & SOPRALENE 180 FR+ GR

ELASTOPHENE FR GR & SOPRALENE 180 FR GR

ELASTOPHENE LS FR GR

Up to 2:12

Up to 1:12

Up to ½:12

COLD ADHESIVE

HEAT WELDED

HOT ASPHALT

SELF-ADHERED

SRI Initial: 82SRI 3 Yr: 67

What is a cool roof? It’s one that reflects and emits the sun’s heat back to the sky instead of transferring it to the building below, thus reducing energy consumption. The greater the roof’s reflectivity, the cooler the rooftop, hence keeping the building’s interior cooler. SOPREMA SOPRASTAR and SG membranes are listed by the Cool Roof Ratings Council and meet and exceed cool roof standards including EPA ENERGY STAR®, California Title 24, and LEED.

Unique fire resistant SBS-modified bitumen formulations, combined with proprietary membrane design, allow SOPREMA to achieve fire classifications unmatched in the roofing industry.

Cap sheet membranes covered with highly reflective white granules.

Cap sheet membrane with a composite rein-forcement and coated with a highly reflective white multilayer film.

Advantages over coated membranes:• No re-coating every few years to maintain reflectivity• Long-lasting protection• Comprehensive warranty• High tear resistance• Retention of high reflectivity and whiteners• Superior dirt pick-up resistance• Easy maintenance

SG GRANULE SURFACED MEMBRANES

SOPRASTAR MEMBRANE WITH TRILAMINATE WHITE FILM

SRI Initial: 88SRI 3 Yr: 85

CAP MEMBRANE GRANULE COLOR CHARTFIRE RETARDANT

HIGH TENSILE RESISTANCE

GRANULATED/SURFACED

TORCH GRADE

HIGH STRENGTH

SELF-ADHERED

ENVIRONMENTALLY FRIENDLY

Standard Stock Colors

Specialty Colors

WH (White) GY (Grey Blend)

BK (Black)

TN (Tan)

BN (Brown)SI (Sienna Blend)

*SOPRASTAR fire rated (FR) up to 3:12 cap sheet available

PRO

DU

CT T

YPE

DEF

INIT

ION

S

REFLECTIVE ROOFING MEMBRANESFIRE RETARDANT OPTIONS

SAEF