2
Quick Setup Guide BEC 7402GTM Modem This guide contains instructions to help you • Connect the Modem • Run the Easy Sign On • Setup the Wireless • Secure the Wireless Section 4 - Secure the Wireless 1. To secure the wireless connection use the left-hand side menu to navigate to Configuration > LAN > Wireless Security. The resulting menu is pictured below. 2. The security is disabled by default and must be enabled to make it secure. Click the drop down menu and select the first option, WPA1 Pre-Shared Key. This is typical for most home users. 3. Now you need to create a wireless connection password in the WPA Shared Key, and then click on the Apply button. This will be the password that your wireless devices will need to connect to the Internet. Make sure to click Apply followed by Save Config to save your settings. You have now completed the set up of your secure, wireless Internet connection! Section 3 - Setup the Wireless 1. Users may self-configure the wireless access point in the BEC 7402GTM modem. To begin, the modem and all the cables must be connected to your com- puter/notebook per the diagram in Section 1, Con- nect the Modem. 3. You will be prompted for a user name and password. The user name will be user and the password will be user. 2. Open an Internet browser, and type 192.168.1.254 in the address line where you would normally type a website address. 4. Use the left-hand side menu to navigate to Configur- ation > LAN > Wireless. The resulting menu is pictured below. 5. Click the Enable button next to WLAN Services. Your wireless is now active. 6. To set up a secure connection, do the following: The default wireless name is wlan-ap. This can be changed by changing the name next to ESSID. Make sure to click Apply and the Save Config to save all your changes.

Quick Setup Guide - BEC Router

Embed Size (px)

DESCRIPTION

7402GTM

Citation preview

Page 1: Quick Setup Guide - BEC Router

Quick Setup GuideBEC 7402GTM Modem

This guide contains instructions to help you

• Connect the Modem • Run the Easy Sign On • Setup the Wireless • Secure the Wireless

Section 4 - Secure the Wireless

1.Tosecurethewirelessconnectionusetheleft-handsidemenutonavigatetoConfiguration > LAN > Wireless Security.Theresultingmenuispicturedbelow.

2.Thesecurityisdisabledbydefaultandmustbeenabledtomakeitsecure.Clickthedropdownmenuandselectthefirstoption,WPA1 Pre-Shared Key.Thisistypicalformosthomeusers.

3.NowyouneedtocreateawirelessconnectionpasswordintheWPA Shared Key,andthenclickontheApply button.ThiswillbethepasswordthatyourwirelessdeviceswillneedtoconnecttotheInternet.MakesuretoclickApplyfollowedbySave Configtosaveyoursettings.

You have now completed the set up of your secure, wireless Internet connection!

Section 3 - Setup the Wireless

1.Usersmayself-configurethewirelessaccesspointintheBEC7402GTMmodem.Tobegin,themodemandallthecablesmustbeconnectedtoyourcom-puter/notebookperthediagraminSection1,Con- necttheModem.

3.Youwillbepromptedforausernameandpassword.Theusernamewillbeuserandthepasswordwillbeuser.

2.OpenanInternetbrowser,andtype192.168.1.254intheaddresslinewhereyouwouldnormallytypea websiteaddress.

4.Usetheleft-handsidemenutonavigatetoConfigur- ation > LAN > Wireless.Theresultingmenuispicturedbelow.

5.ClicktheEnable buttonnexttoWLANServices.Yourwirelessisnowactive.

6.Tosetupasecureconnection,dothefollowing:The defaultwirelessnameiswlan-ap.Thiscanbe changedbychangingthenamenexttoESSID.MakesuretoclickApplyandtheSave Configtosaveall yourchanges.

Page 2: Quick Setup Guide - BEC Router

Section 1 - Connect the Modem

Your computer must be turned off in order to connect the modem.

Thebackofthemodemportsarecolorcodedforeasyconnectivity.

1.•AttachtheWirelessAntenna.

2.•PluginyourDSLline.(cableincluded)

3.•PlugoneendofyouryellowcoatedLANcableintooneoftheyellowLANports,andtheotherendintoyourcomputer’sNICport.

4.•Pluginthepowercord.

5.•TurnthemodemonusingtheOn/Offswitch.WhentheADSLlightstopsflashingturnonyourcomputer.

1.Ensurethatthemodemandallofthecablesareconnectedtoyourcomputer/notebook,andthemodemisturnedon.

2.Verifythemodem’sADSLlightissolidgreen.

3.OpenanInternetbrowser(ex:InternetExplorer).Ifyourdefaultbrowserhomepageisblank,pleasetypeavalidURL(ex:www.MyGSInet.net)toactivatetheEasySignOn.

4.WaitwhiletheDSLconfigurationismade.

5.HighlightthePPPoEoptionandinputyourGSInetusernameandpassword,thenclicktheApplybuttontoapplythesesettings.

6.Waitapproximately1minuteforthemodemtoconfigureandyouseethecongratulationscreenbelow.

Ifyouhaveanyquestionsatanytimeduringmodemsetup,pleasecontactGSInetTechnicalSupportat1-888-896-7824.

Section 2 - Run Easy Sign OnTM

7.Congratulations!YouarenowconnectedtotheInternet.OpenanewbrowsertobeginbrowsingtheWeb,orproceedtoSection3,SetuptheWireless,toconfigurethewirelesscapabilitiesofyourmodem.