To Access DTMF Use the button programmed as the DTMF Autodial.For this example, the Side Function 2, short press, will be used.

Press the Push to Talk To initiate the DTMF string transmission.

Use the Up or Down Keys To select the desired autodial list name.

500674©2018 Advanced Wireless Communications. All rights reserved. *All other trademarks are the property of their respective owners.

(800) 475-585220809 Kensington Blvd, Lakeville, MN 55044

www.advancedwireless.com

Quick Start GuideAWR Advantage Plus DTMF Autodial

DTMF stands for dual tone multi frequency and is used as a method to dial telephone numbers or to issue commands to switching systems. Such as, but not limited to, warning

systems, irrigation systems, doors, and gates.

DTMF Autodial allows up to 8 preprogrammed DTMF strings.

Please NoteDTMF Autodial & Store and Send Must Be Activated On the radio using the AWR Advantage programming software to be able to use the Autodial or Store and Send functions. DTMF Autodial & Store and Send are Not Available On the AWR Advantage two-way radio.

To Enter DTMF Numbers Use the button programmed as the DTMF Store and Send. For this example, the F key, long press, will be used.

Press the S/M key To select and move on to the next number.

Use the Up or Down Keys To select the first desired number in the sequence. The digits will appear in the lower left corner of the LCD.

Repeat Until the entire DTMF string is displayed.

Press the Push to Talk To initiate the transmission.

500674©2018 Advanced Wireless Communications. All rights reserved. *All other trademarks are the property of their respective owners.

(800) 475-585220809 Kensington Blvd, Lakeville, MN 55044

www.advancedwireless.com

Quick Start GuideAWR Advantage Plus DTMF Store and Send

Please NoteDTMF Autodial & Store and Send Must Be Activated On the radio using the AWR Advantage programming software to be able to use the Autodial or Store and Send functions. DTMF Autodial & Store and Send are Not Available On the AWR Advantage two-way radio.

With the DTMF Store and Send, DTMF digits can be manually entered to create a DTMF string that can be transmitted by pressing the PTT button.