PN 200816-001 Rev E » R7.3 1 of 8

Quick Start Guide

UNITYOrchestrator

· GLOBAL MANAGEMENT SYSTEM ·

KVMHypervisor

Silver Peak Systems, Inc.2860 De La Cruz Blvd.Suite 100Santa Clara, CA 95050

1.877.210.7325 (toll-free in USA)+1.408.935.1850www.silver-peak.com/support

© 2

015

Silv

er P

eak

Syst

ems,

Inc.

Before You Begin

Comply with the Orchestrator Host System Requirements [PN 200476-001]

Download the QCOW2 image file for the Orchestrator:

- For a free trial, go to the Silver Peak Marketplace.

- If you’ve purchased the product, then log in at the Silver Peak Support portal.

If you’ve purchased EdgeConnect appliances, verify that you’ve received an email containing your Account Name and Account Key.

Obtain an Orchestrator activation license key

Identify the IP address for the KVM server

SUMMARY OF TASKS

1 Create and configure the virtual machine

2 Configure the virtual Orchestrator server

Orchestrator / KVM Hypervisor

TO BEGIN ... Launch Virtual Machine Manager from the Linux desktop, and connect to the target KVM server.

1 Create and configure the virtual machine

Before this point, you’ll have downloaded the QCOW2 image file from Silver Peak’s Support portal and saved it to your KVM host’s root directory.

a. In the toolbar, click New.

The New VM window opens to the first step.

b. In the Name field, enter GMS (or any name you choose) and select Import existing disk image.

Click Forward.

2 of 8 PN 200816-001 Rev E » R7.3

Quick Start Guide

c. Browse to the downloaded image file.

Accept the default, Generic, for the OS type and Version.

d. Click Forward. The Choose Memory and CPU settings window appears.

e. Refer to the Orchestrator Host System Requirements document and, based on the license that you’ve purchased, enter the appropriate values for Memory (RAM) and CPUs.

In this example, we’ve used the Recommended values that support up to 25 appliances, converting from Gigabytes to Megabytes.

PN 200816-001 Rev E » R7.3 3 of 8

Orchestrator / KVM Hypervisor

f. Click Forward. In the window that appears, review the summary of the entries you’ve made, and select Customize configuration before install.

Click Finish. The GMS Virtual Machine window appears.

g. In the left pane, select Disk, and on the right, click Advanced Options to expand it.

4 of 8 PN 200816-001 Rev E » R7.3

Quick Start Guide

h. Select the following:

Disk bus: Virtio

Storage format: qcow2

Click Apply. In the left pane, Disk 1 changes to Virtio Disk 1.

i. Click Begin Installation.

j. A console window opens, and the Orchestrator virtual machine finishes booting up.

After boot up, you need to determine the mgmt0 IP address for the virtual Orchestrator server so you can access and configure it.

• If you’re using DHCP, the virtual appliance IP address displays after the login, immediately above the prompt.

Or, you could also enter, show ip. Either method works.

PN 200816-001 Rev E » R7.3 5 of 8

Orchestrator / KVM Hypervisor

• If you’re not using DHCP, then you must configure the static IP address and default gateway.

If your environment is not configured for DHCP, then you’ll need to run the following script and assign your own variables. Use admin for both the username and the password.

SCRIPT for non-DHCP environment

Please confirm (y/n)? y

gmsserver login: admin

gms@demo-gms’s password: admin

-bash-2.05b$

-bash-2.05b$ cd gms

-bash-2.05b$ ipsetup.sh

Fri May 20 14:41:21 PDT 2011 Warning: Using ...

====Start at Fri May 20 14:41:22 PDT 2011[For the following prompts, enter values that are specific to your environment. For example, here we’ll choose to assign an IP address of 10.0.40.61 to mgmt0.]

Enter IP address: 10.0.40.61

Enter mask (e.g. 255.255.252.0): 255.255.255.0

Enter default gateway: 10.0.40.1

Enter hostname: selab2-gms

IP = 10.0.40.61

Mask = 255.255.255.0

Gateway = 10.0.40.1

Host = selab2-gms

6 of 8 PN 200816-001 Rev E » R7.3

Quick Start Guide

2 Configure the virtual Orchestrator server

With the Orchestrator initial configuration wizard, you can configure the following:

• Orchestrator Name, Address, and Password

• Orchestrator License & Registration

• Date/Time

• [Optional] Email settings and recipients

• [Optional] Adding appliances

• [Optional] Configuring Orchestrator backup

Be aware that it may take up to two minutes for your PC to get an IP address and open the initial configuration page.

a. Open any browser and enter the mgmt0 IP address. The opening page appears.

b. Enter the default username and password: admin / admin. The first page of the Getting Started Wizard appears.

PN 200816-001 Rev E » R7.3 7 of 8

Orchestrator / KVM Hypervisor

c. Complete the wizard. It may take up to 30 seconds for the virtual appliance to configure.

The Orchestrator dashboard appears.

You’re now ready to deploy, manage, and monitor your Silver Peak appliances.

8 of 8 PN 200816-001 Rev E » R7.3