Upload
josephine-marsh
View
213
Download
0
Tags:
Embed Size (px)
Citation preview
RaceBot can do car race using two DC motors. Let's learn how to go forward, backward, right turn, and left turn. with practicing ' ㄱ ' shape racing, and '┗┓' shape racing,
RaceRace
3. Put the motor frame that is fixed with the DC motor under the main frame and tighten them using only bolts.
AssemblingAssembling
4. Connect a cap nut to the 35mm support, fix them to the main frame, and then insert the wheel to the DC motor.
AssemblingAssembling
5. Locate the battery case on the 7mm support that is fixed with the main frame, and tighten it using 35mm supports.
AssemblingAssembling
8. Locate the LED boards on the middle frame and tighten them using bolts and nuts.
AssemblingAssembling
10. Tighten supports which is made in step 9 and the main frame using bolts, and fix middle frame to it using nuts.
AssemblingAssembling
11. Connect the power cable of the battery case to the power connector of the CPU board. Connect the DC motor cable to the port A and B of DC motor drive board.
AssemblingAssembling
12. Connect OUT port No.1, No.2, No.3, and No.4 of the CPU board to the port No.1, No.2, No.3, and No.4 of the DC motor drive board using 3pin cable in order. Connect OUT port No.5, No.6, No.7, and No.8 of the CPU board to the red, the orange, the yellow and the green LED using 3pin cable in order.
AssemblingAssembling