Upload
others
View
10
Download
0
Embed Size (px)
Citation preview
B i c y c l e R a c k s A d v a n t a g e s
• Allow the maximum number of bicycles in theminimum / smallest space
• Best suited for medium to long term parking
• Efficient bicycle storage
Long lasting and durable
Easily installed
Economical
A p p l i c a t i o n s
Residential apartments
Recreation centres
Workplaces
Secondary schools,TAFE colleges and universities
Retail shopping centres
Train and bus interchanges
M a t e r i a l sSecurabike Bicycle Racks are manufactured from high strength mild steel or aesthetically attractive stainless steel. While most models are available in both materials, please check the specification details on the product you are considering.
Mild steel units are available in hot dipped galvanised or electrostatically powder coated
• Stainless steel units are available in a linished finish orelectropolished.
Bicycle racks are the most popular method of parking or securing bicycles both in Australia and inter-nationally. They are normally the most economical option and the preferred choice by cyclists.Kontor extensive range of Securabike racks is designed to cater for virtually every type of application likely to be encountered. Whether for use in above or below ground parking, for 4 or 400 bicycles, Leda has a bicycle rack suitable.
Leda offers economical do-it-yourself units or fully welded units for use in locations where vandal resistance or high security is required.
As Australia’s largest manufacturer of bicycle parking products for over 19 years, Kontor and Leda provides you with the knowledge that when you specify or purchase a Leda bicycle rack you can be confident in selecting the best product available.
R a c k s
Kontor
www.kontor.net.au I t 1300 631 613
Australia’smost popular rack. 1000s
installed in Australia.
Kontor1300 631 613
Product Range > B icyc le Racks
T h e C o m p a c tPopular with cyclists as the leaning rail provides full support of the bicycle minimising the possibility of accidental damage. It also allows cyclists to securely locate the front or back wheel while allowing them to use a ‘U’ lock to secure the frame and the other wheel to the leaning rail.
Wheel supports have staggered heights which allows bicycles to be located with 300mm spacings rather than the normal 600mm with other racks.In outdoor locations where vandal resistance may be a consideration, Leda recommends the fully-welded model (CBR4SCTM), made from heavier steel sections to provide a more robust alternative.
The CBR4SC is the logical choice when catering for and securing large numbers of bicycles – doubling the number that can be securely parked in a given area.
Kontor
www.kontor.net.au I t 1300 631 613
Material Specifications (General)32NB (38.1) x 1.6mm Pipe / Powder Coated / Hot Dipped Galvanised FinishRails
Supports Ø19 x 1.2mm Pipe / Powder Coated / Hot Dipped Galvanised Finish
CBR4SCPowder Coated
CBR4SCGHot Dipped Galvanised
End View1058
Front View1200
828
300Spacing between multiple racks
300
HDPE plastic sleeveprotects bicycle
Single-sided access
Ø38 PipeLeaning Rail
Ø19 PipeWheel Supports
30 x 8mm Base Rail
Flat PackCompact CBR4SC
4BIKE
PARKING
Australia’smost popular rack. 1000s installed in
Australia.
The Compact Security Bicycle Rack is supplied in flatpack for do-it-yourself installation.
Security Rails and Wheel Supports are supplied unattached and can be quickly bolted to
the Base Rail to provide Single, Double Sided or Angled units.
Countersunksocket screws
M12 x 20Base Rails
Masonry anchor12 x 60mm
Supplied in Flatpack (1000 x
830 x 140mm)
P roduct Range > B icyc le Racks > Hor i zon ta l
Kontor
www.kontor.net.au I t 1300 631 613
Material Specifications (General)Mild Steel 32NB (42.2) x 2.6mm / Ø19 x 1.2mm Pipe / 8mm Plate / Hot Dipped Galvanised / Powder coated in a range of colours Stainless Steel 32NB(42.2) x 2.77mm / Ø19 x 1.2mm Stainless Steel Pipe / 8mm Plate / Linished
This fully welded unit is supplied ready to be bolted down. It is available in either hot dipped galvanised or stainless steel. Being fully welded, it is more suitable for vandal resistant applications.
Ø19 PipeWheel Supports
32NB PipeLeaning Rails
HDPE plastic sleeveprotects bicycle
End View1058
Front View2240
830
400 Typical 800
CBR6SC Powder coatedCBR6SCGHot Dipped Galvanised
SCBR6SC Stainless steel
40 x 8mm Base Rails
BicycleSpacings400mm
VandalResistant
6BIKE
PARKING
Fully-weldedCompact CBR4SCTM
Ø19 PipeWheel Supports
32NB PipeLeaning Rails
Compact CBR6SC
End View1058
Front View1200
830
300 TypicalSpacing between multiple racks
300
CBR4SCTMHot Dipped Galvanised
SCBR4SCTMStainless Steel HDPE plastic sleeve
protects bicycle
40 x 8mm Base RailsSingle-sided access
Single-sided access
Provides wider spacings for easier
parking
4BIKE
PARKING
Product Range > B icyc le Racks > Hor i zonta l
Kontor1300 631 613
Kontor
www.kontor.net.au I t 1300 631 613
Material Specifications (General)Mild Steel 32NB (42.2) x 2.6mm / Ø19 x 1.2mm Pipe / 8mm Plate / Hot Dipped Galvanised / Powder coated in a range of colours Stainless Steel 32NB(42.2) x 2.77mm / Ø19 x 1.2mm Stainless Steel Pipe / 8mm Plate / Linished
CBR4SC SL
Ø19 PipeWheel Supports
32NB PipeLeaning Rails
Tracks
Single-sided access
Front View1500
Top View
End View1840
865
1800
CBR4SC SLHot Dipped Galvanised
SCBR4SC SL Stainless steel
400 Typical
HDPE plastic sleeveprotects bicycle
4BIKE
PARKING
Space can be tight in busy bicycle parking stations so the CBR4SC SL is designed to slide bicycles apart giving cyclists more room to move,and allowing easier locking of bicycles.
Casters
Multiple rack installation
Rack slides to allow easy access to bicycles
Product Range > B icyc le Racks > Hor i zonta l
Kontor
www.kontor.net.au I t 1300 631 613
Material Specifications (General)Mild Steel 32NB (42.2) x 2.6mm / 20NB (26.9) x 2.3mm Pipe / Hot Dipped Galvanised / Powder coated in a range of colours Stainless Steel 32NB(42.2) x 2.77mm / 20NB (26.7) x 2.11mm Pipe / Linished
65 x 8mm Base Rails
65 x 8mm Base Rails
65 x 8mm Base Rails
20NB PipeWheel Supports
20NB Pipe wheel support
20NB PipeWheel Supports
32NB Pipe leaning rails
32NB PipeLeaning Rails
32NB PipeLeaning Rails
Delta CBR2B
Delta CBR6B
Delta CBR4B
CBR2BGalvanised / Powder Coated
SCBR2B Stainless steel
End View1075
Front View450
450
450 300Typical
400Typical
450
CBR6BGalvanised / Powder Coated
SCBR6B Stainless steel
CBR4BGalvanised / Powder Coated
SCBR4B Stainless steel
End View1075
Front View1200
875
875
End View1075
Front View2240
300
875
Single-sided access
Single-sided access
Single-sided access
2BIKE
PARKING
4BIKE
PARKING
6BIKE
PARKING
Product Range > B icyc le Racks > Hor i zonta l
Kontor1300 631 613
Kontor
www.kontor.net.au I t 1300 631 613
Material Specifications (General)CBR88 Galvanised 40NB (48.3) x 3.2mm / 25NB (33.7) x 2.6mm / 20NB (26.9) x 2.6mm Pipe / Powder coated in a range of colours
Stainless Steel 40NB (48.26) x 2.77mm / 25NB (33.4) x 2.77mm / 20NB (26.7) x 2.11mm Stainless Steel Pipe / Linished
Best suited for double-sided access
40NB Pipe
20NB
Hitching Rail
Plastic cap
Concealed fixing10 x 85mm flat head
masonry anchors
While the narrow width of the CBR88 (950mm) makes it ideal for use on footpaths, all models are perfect for use in public areas where double sided access is available.
950
Typical End View924
Front View950
4 Bicycle Capacity
CBR88Galvanised / Powder Coated
SCBR88 Stainless steel
Bicycle Capacity 4 6 8 10Overall Length 950 1200 1450 1700Galvanised CBR88 CBR128 CBR148 CBR178Stainless Steel SCBR88 SCBR128 SCBR148 SCBR178
CBR128
CBR88
CBR148
CBR178
Concord CBR88
6BIKE
PARKING
8BIKE
PARKING
4BIKE
PARKING
BIKEPARKING
Product Range > B icyc le Racks > Hor i zonta l
Kontor
www.kontor.net.au I t 1300 631 613
Stainless Steel. 40NB (48.26) x 2.77mm / 25NB (33.4) x 2.77mm / 20NB (26.7) x 2.11mm Stainless Steel Pipe /
Linished BR44 8mm Plate /Stainless Steel / Hot Dipped Galvanised or Powder coated in a range of colours
900
End View900
Front View1700
CBR55Galvanised / Powder Coated
SCBR55 Stainless Steel
200x 200 x 8 Baseplate
40NB Pipe25NB
Hitching Rail
Best suited fordouble-sided access
Comet CBR55
6BIKE
PARKING
Product Range > B icyc le Racks > Hor i zonta l
Kontor1300 631 613
Kontor
www.kontor.net.au I t 1300 631 613
Material Specifications (General)Mild Steel 8mm Mild Steel Plate / 40NB (48.3) x 3.2mm / 20NB (26.9) x 2.3mm Pipe / Galvanised or Powder coated in a range of coloursStainless Steel 8mm Stainless Steel Plate / 40NB (48.26) x 2.77mm / 20NB (26.7) x 2.11mm Stainless Steel Pipe / Linished
ConcorSentry BR158Fd BR158
20NBRail40NB Pipe
20NBRail
40NB Pipe
Concealed fixing85mm flat head
masonry anchors
BR158FGalvanised / Powder Coated
SBR158F Stainless Steel
BR158BGalvanised / Powder Coated
SBR158B Stainless Steel
Front View1500
End View
800
200
End View500
Front View1500
800
Sentry BR158B
Plastic capBest suited for
double-sided access
Best suited fordouble-sided access
5BIKE
PARKING
5BIKE
PARKING
Product Range > B icyc le Racks > Hor i zonta l
Kontor
www.kontor.net.au I t 1300 631 613
Material Specifications (General)80NB (88.9) x 4.0mm Heavy Duty Pipe / 25Ø Pipe / MS Plate / Hot Dipped Galvanised / Powder coated in a range of colours
70°
UBS2
865
65
355
Front View530
Top View
End View400
Wheel support
Masonry anchor fixingSingle-sided
access
25Ø Pipe Rail with Plastic Protection
80NB Pipe
Universal Bike StationA double bicycle parking station that allows cyclists to locate and secure their bicycle (using their own lock).
55The bicycle station is an extremely flexible parking system that can be installed in a number of configurations to maximise the use of available space.
Regiment Layout
Pavement Layout
Garden Layout
Product Range > B icyc le Racks > Hor i zonta l
Kontor1300 631 613
Kontor
www.kontor.net.au I t 1300 631 613
Material Specifications (General)Frame 50 x 50 x 2.5mm SHS / Powder Coated / Hot Dipped Galvanised Finish Wheel Supports Ø19 x 1.2mm Pipe / Powder Coated / Hot Dipped Galvanised Finish
1299
899
351
1832
Bicycle lock cables
BRC01/02/04/08 Café Racks
Signage can be custom-designed to incorporate logos or advertising
Lockable casters
2BIKE
PARKING
8BIKE
PARKING
4BIKE
PARKING
1BIKE
PARKING
BRC04Front View
411End View
975
BRC01Front View
300End View
482
BRC02Front View
325End View
965
Ideal for attracting cyclists to your location. Leda’s Café Racks can be positioned conveniently for cyclists in secure and convenient locations.When the facility is closed, the racks can be simply stored away.
BRC08Front View
1430End View
604
BRC01
BRC02
BRC04
BRC08
Product Range > B icyc le Racks > Hor i zonta l
Kontor
www.kontor.net.au I t 1300 631 613
Material Specifications (General)125 x 75 x 3mm RHS / Hot dipped galvanised / Powder coated in a range of coloursFrame
Extensions 65 x 65 x 3mm Track / 75 x 40 x 4mm Channel / 20NB (26.9) x 2.3mm Pipe / Hot dipped galvanised
Can be installed at an angle to increase aisle widths
Bottom bicycle rack (CBR1B)is included in the price.Note: 2 x CBR2GS racks are illustrated to show staggering of heights.Each CBR2GS rack can park a single bicycle on the upper and lower levels for a total of 2 bicycles.
Bottom bicycle rack (CBR1B)is included in the price.
Provides the maximum utilisation of allocated horizontal storage and parking, and is easy to use.Simply pull out the sliding base rail until it reaches its pivot point, and fold down to allow easy positioning of your bicycle. A leaning rail provides stability and a secure point for locking.
CBR2GS
Minimum Ceiling Height
Wall
Opposing unit
3000
20NB PipeLeaning Rail
125 x 75 Frame
Supplied in knock-down kit form for easy assembly on site.
Tracks
Single Installation Recommended Clear Area4200
400 Typical
795
2572
2262Nom
4BIKE
PARKING
Double Height Storage
Front View
Double Installation Recommended Clear Area
6200
2262 Nom
Double Installation Nominal Aisle Width
1100
Single Installation Nominal Aisle Width
1250
2572Nom
Top View
2940 Nom
CBR2GS is also available in a double storey locker. Refer Lockers section.
Product Range > B icyc le Racks > Hor i zonta lKontor
1300 631 613
Kontor
www.kontor.net.au I t 1300 631 613
Material Specifications (General)125 x 75 x 3mm RHS / Hot dipped galvanised / Powder coated in a range of coloursFrame
Extensions 65 x 65 x 3mm Track / 75 x 40 x 4mm Channel / 20NB (26.9) x 2.3mm Pipe / Hot dipped galvanised
Bottom bicycle rack (CBR4B) is included in the price.
Provides the maximum utilisation of allocated horizontal storage and parking, and is easy to use. Simply pull out the sliding base rail until it reaches its pivot point and fold down to allow easy positioning of your bicycle. A leaning rail provides stability and a secure point for locking.
20NB PipeLeaning Rail
125 x 75 Frame
Supplied in knock-down kit form for easy assembly on site.
Tracks
400 Typical
2540Nom
1840Nom
2075Nom
8BIKE
PARKING
CBR8GSDouble Height Storage
Front View
Top View1600
Minimum Ceiling Height
Opposing unit
3000
1840Nom
2540Nom
Double Installation Recommended Clear Area
6000
2075 Nom
2750 Nom
Double Installation Nominal Aisle Width
1100
Wall
Single Installation Nominal Aisle Width
1250
Single Installation Recommended Clear Area4000
Product Range > B icyc le Racks > Hor i zonta l
Kontor
www.kontor.net.au I t 1300 631 613
Frame 125 x 75 x 3mm RHS / Hot dipped galvanised / Powder coated in a range of colours Extensions 65 x 65 x 3mm Track / 75 x 40 x 4mm Channel 20NB (26.9) x 2.3mm Pipe / Hot dipped galvanised
Lifting bicycles can be difficult or undesirable for many cyclists such as the elderly.This automated dual height bicycle rack is the first of its kind and provides the capacity to double bicycle parking spaces without the requirement for cyclists to lift their bicycle into position on the top level.
Minimum Ceiling Height
Opposing unit
3000
125 x 75 Frame
Tracks
2075Nom
1840Nom
CBR8GSA Double Height Storage
2540Nom
Top View1600
Bottom bicycle rack (CBR4B) is included in the price.
20NB PipeLeaning Rail
Supplied in knock-down kit form for easy assembly on site.
8BIKE
PARKING
Automated
As the unit is automated, the top rack can be extended right down to the ground so cyclists are able to wheel their bike onto the rack without the need to lift it into position. The security rail is conveniently located so the cyclist can then attach their U-lock to the frame and wheel. Safety FeaturesOperation of the rack both in and out is by ‘pressing and holding’ the up or down button, conveniently located on the handle. If the cyclist removes their hand, the rack will stop immediately. The cyclist is also in a good position to watch for other pedestrians and cyclists in the aisle.The electric motors are 24VDC and low maintenance. Lifting capacity is for bicycles up to 30kg.There is no automation on the lower level.
400 Typical
2540Nom
1840Nom
Front View
Double Installation Recommended Clear Area
6000
2075 Nom
2750 Nom
Double Installation Nominal Aisle Width
1100
Wall
Single Installation Nominal Aisle Width
1250
Single Installation Recommended Clear Area4000
Product Range > B icyc le Racks > Hor i zonta l
Kontor1300 631 613
Kontor
www.kontor.net.au I t 1300 631 613
Material Specifications (General)40 x 40 SHS / Hot dipped galvanised / Powder coated in a range of coloursFrame
Supports 20NB (25.0) x 1.2mm Pipe / 70 x 35 x 2mm Track / Powder Coated / Hot Dipped Galvanised Finish
Material Specifications (General)Rails 32NB (38.1) x 1.6mm Pipe / Powder Coated / Hot Dipped Galvanised FinishSupports 20NB (25.0) x 1.2mm Pipe / Powder Coated / Hot Dipped Galvanised Finish
Leda’s double height bicycle racks provide the maximum utilisation of allocated storage and parking areas
CBR8M Double Height Storage
Manual
1380
Top View
Top View End View
40 x 40Frame
20NB Wheel Supports and Leaning Rail 70 x 35
Wheel Track
Supplied in knock-down kit form for easy assembly on site.Fully welded units are also available, but prove more difficult to freight.
1600 1600
400
MinimumCeiling Height
2500
8BIKE
PARKING
Product Range > B icyc le Racks > Hor i zonta l
Kontor
www.kontor.net.au I t 1300 631 613
Drainage holesin planter base
32NB Pipe
BRP01Planter Box
BRP02Planter Box
Material Specifications (General) Planter 1.5mm Galvanised sheet / Powder coated in a range of colours
Rack 32NB (38.1) x 1.6mm Pipe Galvanised / Powder coated in a range of colours
1000
1800
800
250
306
917
350
1223
Top View
End View
214
1800
1800
800
250
306
917
350
2140
Top View
End View
214
1000
HDPE sleeve shown is optional and recommended to protect the bicycle
HDPE sleeve shown is optional and recommended to protect the bicycle
6BIKE
PARKING
BIKEPARKING
Product Range > B icyc le Racks > Hor i zonta lKontor
1300 631 613
Kontor
www.kontor.net.au I t 1300 631 613
350 deep planter box, drainage holes in base
BRP03 planter boxIllustrated
BRP03 / 04 / 05 Planter Boxes
Material Specifications (General) 1.5mm Galvanised sheet / Powder coated in a range of coloursPlanter
Rack 32NB (38.1) x 1.6mm Pipe Galvanised / Powder coated in a range of colours
1000800
250 Typical
250 Typical
1800
BRP04Top View
BRP03Top View
End View End View
1800
End View
BRP05Top View
6024
1000800
4212
306 Typical
4600 1000
250 Typical
6BIKE
PARKING
BIKEPARKING
HDPE sleeve shown is optional and recommended to protect the bicycle
BIKEPARKING
Greenyour suburb
Product Range > B icyc le Racks > Hor i zonta l
Kontor
www.kontor.net.au I t 1300 631 613
The Peloton bicycle rack is the ultimate in road bike racks.No other rack promotes cycling as strongly as the Peloton. This is a bicycle rack for communities looking to make a statement.
PSBR03F/BPeloton
Material Specifications (General)50 x 50 SHS Mild Steel / 32NB (38.1) x 1.6mm Pipe / Galvanised / Powder coated in a range of coloursRack
Profile 8mm Mild Steel Plate / Powder coated in a range of colours
4795 985
Front View(view from pavement)
Top View
End View
985
400Typical
1644
739
Line of kerb
Standard Parking Spaces 5400 x 2400
Thoroughfare
Footpath
2200
BIKEPARKING
50 SHS
10mm Plate
32NB pipe rails with protective
sleeve
An easy way of converting street-located car spaces to a parking facility of up to 12 bicycles. Ideal for local governments to provide temporary or permanent secure bicycle parking.
Product Range > B icyc le Racks > Hor i zonta l
Kontor1300 631 613
Kontor
www.kontor.net.au I t 1300 631 613
Material Specifications (General)50 x 50 SHS Mild Steel / 32NB (38.1) x 1.6mm Pipe / Galvanised / Powder coated in a range of coloursRack
Profile 65NB (76.1) x 3.6mm Pipe / Galvanised / Powder coated in a range of colours
65NB pipe frame
50 SHS
32NB pipe rails with protective sleeve
The fixed insitu (CSBR01F) model is best suited for permanent installations or in bitumen surfaces, while the base plate model (CSBR01B) can be bolted down onto concrete surfaces or footings.
CSBR01F / BCadillac
5400
End Section Sleeve End Section
10404600
Front View(view from pavement)
Top View
End View
Manufactured in 2 mirror-reversed sections with sleeve straight section
1040
400
1274
742
Line of kerb
Standard Parking Spaces 5400 x 2400
Thoroughfare
Footpath
2200
An easy way of converting street-located car spaces to a parking facility of up to 12 bicycles. Ideal for local governments to provide temporary or permanent secure bicycle parking.
BIKEPARKING
Product Range > B icyc le Racks > Hor i zonta l
Kontor
www.kontor.net.au I t 1300 631 613
Material Specifications (General)50 x 50 SHS Mild Steel / 32NB (38.1) x 1.6mm Pipe / Galvanised / Powder coated in a range of coloursRack
Profile 65NB (76.1) x 3.6mm Pipe / Galvanised / Powder coated in a range of colours
65NB pipe frame
50 SHS
32NB pipe rails with protective sleeve
CSBR02F / BLincoln
5400 14704600
Front View(view from pavement)
Top View
End View
1470
400
1274
742
Line of kerb
Standard Parking Spaces 5400 x 2400
Thoroughfare
Footpath
An easy way of converting street-located car spaces to a parking facility of up to 8 bicycles. Ideal for local governments to provide temporary or permanent secure bicycle parking.
2200
End Section Sleeve End Section
Manufactured in 2 mirror-reversed sections with sleeve straight section
The fixed insitu (CSBR02F) model is best suited for permanent installations or in bitumen surfaces, while the base plate model (CSBR02B) can be bolted down onto concrete surfaces or footings.
8BIKE
PARKING
Product Range > B icyc le Racks > Hor i zonta l
Kontor 1300 631 613
Kontor
www.kontor.net.au I t 1300 631 613
BRT1School Rack
Galvanised / Powder Coated
Many schools require a low cost bicycle rack without security.The BRT1 range is both economical and practical for such application.
BRT3School Rack
Galvanised / Powder Coated
Staggered heights allows increased capacity with easier access.
SchoolSpecial
SchoolSpecial
Material Specifications (General)Mild Steel 8mm round bar / Powder coated
2BIKE
PARKING
2BIKE
PARKING
368
60
End View
Top View
325Side View
180
325
368
60
End View
Top View
325Side View
175144
328
325
Product Range > B icyc le Racks > Hor i zonta l
Kontor
www.kontor.net.au I t 1300 631 613
Material Specifications (General)50 x 50 x 2.5mm SHS / 12Ø Rod / 8mm MS Plate / Hot Dipped Galvanised / Powder coated in a range of colours PVC coated steel cable assembly
50 SHS
200 x 200 x 8 Baseplate
BR2101
2145
TypicalFront View
340
SingleEnd View
330Top View400 nom
Back to BackEnd View
660
12mm ØWheel
Support
Cable Assemblies
12mm Ø HangerPVC Coated
325 nom
Typical Installation Arrangement Critical Dimension
650
Back to BackArrangement
BR2101
Back to BackMultiple Unit Arrangement 16 bicycle capacity shown
4BIKE
PARKING
2BIKE
PARKING
MostPopular
Product Range > B icyc le Racks > Ver t ica l
Kontor 1300 631 613
Kontor
www.kontor.net.au I t 1300 631 613
Material Specifications (General) Mild steel 20NB (26.9) x 2.6mm Medium Duty Pipe / Ø12 Hanging Pins / Galvanised / Powder coated in a range of coloursStainless Steel 20NB (26.9) x 2.6mm Grade 304 Stainless Steel Pipe / Ø12 Hanging Pins / Linished
BR66FGalvanised / Powder Coated
SBR66FStainless Steel
Front View Side View610
510
110 x 50Wall Plate
20NB Pipe
100mm Hanging Pins
450 shown300-450 spacings are typical, depending on the storage density levels required
Front View
Multiple Installation GuideUtilising the available wall space in the bicycle parking location, helps maximise the number of bicycles that can be securely stored.
Staggering the height of the BR66F Hanging Rail also allows greater storage capacity.
Vertical Bicycle Storage
BR66FWall Mount
2100
1800Minimum
Product Range > B icyc le Racks > Ver t ica l
Kontor
www.kontor.net.au I t 1300 631 613
Material Specifications (General) 30 x 30 x 3mm SHS / Hot dipped galvanised / Powder coated in a range of colours100 x 40 x 8mm MS plate / Hot dipped galvanised / Powder coated in a range of colours
Side View423
Front View320
40
565
Front View650 Typical
Multiple Installation GuideUtilising the available wall space in the bicycle parking location, helps maximise the number of bicycles that can be securely stored.
30 x 30 x 3
SHS Vertical Bicycle Storage2 bicycle capacity
BR542FWall Mount
295
100 x 40Wall Plate
Hanging Pins
Crimped wire rope
2100 1800
Biggestwall mounted
seller
Product Range > B icyc le Racks > Ver t ica l
Kontor 1300 631 613
Kontor
www.kontor.net.au I t 1300 631 613
Material Specifications (General)Frame 40 x 40 x 4mm Mild Steel Angle / Hot Dipped Galvanised / Powder coated in a range of coloursTrack / Rails 3mm Mild Steel Plate / 20NB (26.9) x 2.3mm Pipe / Hot Dipped Galvanised or Powder coated in a range of colours
40mm Angle Frame
Easy to useback wheelroll on / roll off
Plasma-cutTrack
20NB PipeLeaning Rails
BRV26Vertical
2100
End View1394
400 Typical200
Front View2400
Top View
Using a modular angular steel frame, the BRV26 is supplied in knock-down kit form allowing it to be easily transported and quickly bolted together on site.
6BIKE
PARKING
Product Range > B icyc le Racks > Ver t ica l
Kontor
www.kontor.net.au I t 1300 631 613
BR95Commuter
The commuter rack was designed for the workplace as the vertical storage saves space and the shelves allow storage for the cyclist’s riding gear.
Clean up yourbicycle storage area if it starts to look like a laundry
Recommendedspacing
between racks300mm
Material Specifications (General)
Mild Steel 20NB (26.9) x 2.6mm Medium Duty Pipe / Galvanised / Powder coated in a range of colours
Utilising walls, and even ceilings, can often provide additional bicycle storage capacity.
Front View210
Side View
1200
100
Vertical Bicycle Storage
300 x 50 Ceiling Plate
20NB Pipe
100mmHanging Pins(verticaladjustable)
Hanging Pins(verticaladjustable)
RR12F Ceiling Mount
Front View395
312
624Recommended
spacing between racks
300mm
Side View342
Top View
Product Range > B icyc le Racks > Ver t ica l
Kontor 1300 631 613
Kontor
www.kontor.net.au I t 1300 631 613
BR72Swivel
The swivel rack is the ultimate flexibility by allowing movement od surrounding bike so that cyclists can better access their bicycles. This rack also allows vertical movement which can cater for a variety of bicycles sizes. Not recommended for bicycles with mud guards on front wheels
BR72TROptional wall mounted horizontal track for even more space flexibility
Nominal heightof 1200 off flooris recommended
Material Specifications (General)Mild Steel 2mm Mild Steel Plate / Galvanised / Powder coated in a range of colours
Front View80
Side View655
600
Nominal heightof 1200 off flooris recommended
Product Range > B icyc le Racks > Ver t ica l
Kontor
www.kontor.net.au I t 1300 631 613
BRX01X Rack
Material Specifications (General)2mm Mild Steel Plate / Galvanised / Powder coated in a range of colours 20NB (26.9) x 2.3mm Pipe / Galvanised / Powder coated in a range of colours
The X Rack is one of Securabike’s ultimate bicycle racks as it alone can:
Act as a ramp so no lifting of bicycle requiredStore bicycles vertically for space efficiencyIs supplied flat packed, so small freight componentQuick and easy to bolt down and installOptional security rail to secure frame and wheelsAllows crossover X design to maximise spaceAdjustable height so you can stagger racks
1160
End ViewHeight and Width Adjustable
Typical Configuration End ViewNominal Dimensions
End View Top View168
Adjustableheight
Adjustableheight
Security rail
Quick and easyto bolt down
Vertical or horizontal bicycle storage
Racks can bestaggered and / or opposed
Typical Configuration
Staggered heights
Access one side
Staggered HeightOpposed
14001160
1400
300 min
Accessone side
Typical Configuration
Staggered heights /
opposedAccess two sides
300 min
300 min
Accesstwo sides
Accesstwo sides
862
1180
862
1180
1543
1595
44
5
670
775
Variable Height
80
Product Range > B icyc le Racks > Ver t ica l
Kontor 1300 631 613
Kontor
www.kontor.net.au I t 1300 631 613
Loading Point
Ideal for installation into tight locations
Material Specifications (General)Steel frame / chequerplate floor Turnstile
Bicycle Rack 20NB (26.9) x 2.3mm Pipe / 3mm steel plate / Hot dipped galvanised or powder coated in a range of colours
Carousel CBR12
Top View3006
Front View
1796
This innovative space-efficient design provides a rack catering for up to 12 bicycles. Ideal for ‘difficult to get to’ locations, it is easy to load bicycles by wheeling up the front wheel until the back wheel locates in the guide. Leaning rails provide support and a means to secure the bicycle
Vertical Secure Parking for up to 12 bicycles
Wheel Guides
Leaning Rails
Turntable (4 piece)
BIKEPARKING
The carousel rack can also be incorporated into a modular cage fitted with a lockable pedestrian gate with optional electronic locking.
Product Range > B icyc le Racks > Ver t ica l
Kontor
www.kontor.net.au I t 1300 631 613
CBR12MGalvanised Mesh
Surround
CBR12PPremier Fencing
Surround
CBR12SSolid Sheet Metal
Surround
Pedestrian Gatewith magnetic locks and access control
Pedestrian Gatewith magnetic locks and access control
Pedestrian Gatewith magnetic locks and access control
3740
3760
3760
Loading Point
Loading Point
Loading Point
Surround shown partly transparent
for clarity
Top View3760
Top View3760
Top View3740
2600High
2400High
2600High
Carousel CBR12Modular Cages
Kontor
www.kontor.net.au I t 1300 631 613
Kontor 1300 631 613
Material Specifications (General)Mild Steel 40NB(48.3) x 3.2mm / 20NB (26.9) x 2.6mm Pipe / 10mm Mild Steel Plate / Galvanised / Powder coated in a range of coloursStainless Steel 40NB(48.26) x 2.77mm / 20NB (26.9) x 2.6mm Stainless Steel Pipe / 10mm Plate / Linished
150 Ø Baseplates40NB Frame
40NB Frame
Ideal for medium density bicycle parking in urban areas. The BT01 and BT02 Bicycle Trees provide secure vertical storage,
and significantly reduce the area required for bicycle parking allocation, while providing protection for existing vegetation.
1700
BT01Top View
BT02Top View
BT01
BT02
BT01 / 02Bicycle Trees
Front View1200
Front View1200
1500
8BIKE
PARKING
8BIKE
PARKING
DBH02 Hooks(Refer Domestic Products)
66
Kontor
www.kontor.net.au I t 1300 631 613
Material Specifications (General)BT01/BT02 40NB(48.3) x 3.2mm / 20NB (26.9) x 2.6mm Pipe / 10mm Mild Steel Plate / Galvanised / Powder coated in a range of colours
40NB(48.26) x 2.77mm / 20NB (26.9) x 2.6mm Stainless Steel Pipe / 10mm Plate / LinishedBT03 125 x 4mm SHS / Galvanised / Powder coated in a range of colours / Stainless Steel
Ideal for medium density bicycle parking in urban areas. The BT03 and BT04 Bicycle Trees provide secure vertical storage,
and significantly reduce the area required for bicycle parking allocation,
BT03Top View
BT04Top View
BT03
BT04
DBH02 Hooks(Refer Domestic)
DBH04 Hooks(Refer Domestic)
SHS Post
1800
2300
BT03 / 04 Bicycle Trees
4BIKE
PARKING
Front View1260
Front View
BIKEPARKING
Kontor
www.kontor.net.au I t 1300 631 613
Kontor 1300 631 613
Kontor Commercial Pty Ltd
39 Cavan Road, Gepps CrossSouth Australia 5094
www.kontor.net.auT 1300 631 613
ABN 41 615 322 999