APPLICATIONRadial Jet Mixer S agitates liquids inside a regularly pro-portioned vessel on a low mixing level without mechan-ical force on the product for a homogeneous mixing result independent of filling level.Radial Jet Mixer T should be considered for high and small tanks.

Typical applications:ظ Dissolving solids in solventsظ Emulsionsظ Dispersionsظ Suspensionsظ Aerationظ Chemical reactionsظ Homogenising

HIGHLIGHTSظ Achieves efficient, flexible mixingظ Minimises investment costظ Reduces tank cleaning timeظ Low installation effortظ Less equipment – pump can be used for transfer,

mixing and CIP returnظ Completely symmetrical mixing fieldظ Extremely quiet surface, no vortex

ظ Low space requirement

WORKING PRINCIPLEA nozzle specially designed for the tank geometry, and typically connected to a recirculation pump, guides liq-uid from the pump discharge into the mixing tank and creates steady turbulence. A suction outlet provides the recirculation pump with new liquid.

MAIN COMPONENTS ظ 150 - 60,000 litre tankظ Single mixing nozzleظ Recirculation pumpظ Set of pneumatic and manual butterfly valvesظ Continuous level sensor (optional)ظ Dosing hopper (optional)

TECHNICAL DATAThe product viscosity limit for mixture is 200 cP.Available in different sizes depending on tank volume.All parts in contact with the product are made of AISI 316L.

CONTROL CABINETThe control cabinet is supplied by the customer. FDS is provided.

LAYOUT EXAMPLEMeasurements depending on tank size. Available on request.

Radial Jet Mixer T & Radial Jet Mixer SKey mixing component using established technology.Available with single or twin mixing nozzles.

SINGLE RADIAL JET MIXER

APPLICATIONRadial Jet Mixer T uses the latest mixing technology to reduce mixing time by up to 50% compared to a tradi-tional mixer. This is thanks to a twin stage for low and high fluid levels. This provides a homogeneous mixing time of 5-10 minutes for a standard beverage. The Radial Jet Mixer T mixes syrup consistently in a tank. It can be easily installed into existing tanks and is ideal for mixes of up to 200 cP in beverage products such as carbonat-ed soft drinks, still drinks, ice tea, energy drinks and other applications.

Typical applications:ظ Dissolving solids in solventsظ Emulsionsظ Dispersionsظ Suspensionsظ Aerationظ Chemical reactionsظ Homogenising

Radial Jet Mixer T provides operators with the flexibil-ity to add forgotten ingredients at floor level in small amounts.

HIGHLIGHTSظ Achieves efficient, flexible mixingظ Minimises investment costظ Low energy consumptionظ Reduces tank cleaning timeظ Add forgotten ingredients quickly and easilyظ Low installation effortظ Less equipment – pump can be used for transfer,

mixing and CIP returnظ Completely symmetrical mixing fieldظ Extremely quiet surface, no vortexظ Low space requirement

TWIN RADIAL JET MIXER

WORKING PRINCIPLESyrup is fed through the product inlet and circulated by a pump towards the Radial Jet Mixer T, which injects syrup into the tank. Different production modes allow mixing at a low or high stage, depending on the fluid level. The pump speed is adjusted to the level, for higher energy efficiency. A continuous level sensor monitors the tank fluid level. After mixing, the final syrup is trans-ferred to the product outlet. CIP supply enters through the spray ball. The Radial Jet Mixer T can also be used for faster and more efficient tank cleaning. At the lower stage, the jet is radially distributed and symmetrically sprayed in all directions.

OPTIONSظ Hopper with manual butterfly valve to add forgotten

ingredients in small amounts.ظ Continuous level sensor allows pump speed adjust-

ment during mixing. This provides energy savings, dependent on the mixing level.

MAIN COMPONENTS ظ 150 - 60,000 litre tankظ Twin mixing nozzleظ Recirculation pumpظ Set of pneumatic and manual butterfly valvesظ Continuous level sensor (optional)ظ Dosing hopper (optional)

OPERATION MODES

Low stage mixing High stage mixing CIP mode

TECHNICAL DATAThe product viscosity limit for mixture is 200 cP.Available in different sizes depending on tank volume.Pump size 2.2 – 30 kW.All parts in contact with the product are made of AISI 316L.

Tetra Pak, and PROTECTS WHAT’S GOOD are trademarks belonging to the Tetra Pak Group. www.tetrapak.com

© Tetra P

ak Intern

ational S.A

., Tetra Pak P

rocessing

Equip

men

t AG

, 2021-03

CONFIGURATION TABLETake the data from the table below.Ingredients fed from tank top always require a Radial Jet Mixer T. For pulps it is recommended to choose a size larger.

Measurements depending on tank size. Available on request.

SINGLE OR TWIN RADIAL JET MIXER?Please note that a minimum height must be maintained, especially for Radial Jet Mixer T.

Size Min. height Min. height Tank hole Article h hi ø th no. (mm) (mm) (mm) DN50 666 422 362 -

DN65 690 430 362 -

DN80 723 440 512 -

DN100 766 506 512 -

ø th

hhi

Please contact Tetra Pak Processing Equipment AG if your tank dimension is not listed in the table.The tank is not within the scope of delivery.

ø

H