Upload
others
View
19
Download
1
Embed Size (px)
Citation preview
Radiography Testing Products & Accessories
IQI’s(Wire/Hole/Duplex) CR/DR Phantom Lead Marking Tapes Lead Numbers, Letters,Arrows
Lead Storage Box Films Lead Screens PVC Cassettes
Collimators Cranking Unit & Guide/Extension Tube
Yellow Chalk & Leucoplast/White Masking Tape
Permanent Magnets
Blinker Lead Apron/Gloves Radiation Warning Signs Radiographic ExposureCalculator
Radiography Accessories
Cee Vee Tongs & Lead Shots
Radiography Accessories
Lead Pots Dosimeter & Charger Radiation Survey Meter
Zone Monitor Dark Room Safe Light Chemicals
Film Cutter Stainless Steel Tanks Manual Processing Tanks
Automatic Film Dryer Automatic Film Processor Film DgitizerFilm Drying Cabinets
Luminance Meter
LED FV - PCS LED FV - PC LED FV - BS LED FV - FP
Viewing Area(LXW)
3.5” X 8.5”90mmX216mm
4.5” X 17”115mmX430mm
4.5” X 17”115mmX430mm
14” X 17”355mmx430mm
Film Density Up to 4.5 D Up to 4.5 D Up to 4.5 D To be announced
Illumination Power LEDs Power LEDs Power LEDs Power LEDs
Input Voltage 110–264 VAC, 50 – 60Hz 110–264 VAC, 50 – 60Hz 110–264 VAC, 50 – 60Hz 110–264 VAC, 50 – 60Hz
Rated Output 120W 240W 240W 600W
Surface Temp. < 60° C < 60° C < 60° C < 60° C
Dimension(LXWXH)
16.5" X 7.5" X 3.75"415mmX190mmX 95mm
22.8" X 8.5" X 3.75"580mmX210mmX95mm
21.65" X 8.66" X 9.0"550mmX220mmX230mm
17.3" X 12.6" X 20.9"440mmX320mmX 530mm
Housing Aluminium Housing Aluminium Housing Stainless Steel Housing Stainless Steel Housing
Max Brightness≥ 250,000 Lux/≥85,000 cd/m2
≥ 250,000 Lux/≥85,000 cd/m2
≥ 250,000 Lux/≥85,000 cd/m2
To be announced
Intensity Control From 1% - 100% From 10% - 100% From 10% - 100% From 10% - 100%
CoolingHigh capacity fans with
aluminium heat sinkHigh capacity fans with
aluminium heat sinkHigh capacity fans with
aluminium heat sinkHigh capacity fans with
aluminium heat sink
Weight 9.03 lb(4.1 kg) 13.22 lb(6.0 kg) 24.69 lb(11.2 kg) 46.29 lb(21kg)
LED Film Viewers
Ÿ High Power LEDsŸ Built-in Writing Lamp(only in SS models)Ÿ Electronic Brightness ControlŸ Corrosion Resistant BodyŸ Foot Switch ControlŸ As per ASTM 1390
Technical Specications
LED FV-PCS LED FV-PC LED FV-BS LED FV-FP
* specications are subject to change without prior notice
Measuring Range 0 – 4.5D
Aperture 3mm
Accuracy ±0.05D
Repeatability ±0.01D
Scale Factor (Slope) Stability ±1% per 6 months max
Warm-Up Time none
Measuring Location 3.77in. (9.6cm) throat depth
Power Requirements
Battery Pack 2x1000mAh li-ion rechargeableInstrument Rating 5VDC @ 1.2 AmpsMeasurements per charge > 2000
PhysicalDimensions L- 146 mm W- 85 mm H- 25 mmWeight (Display Unit+Probe) 1.10lbs (500g)
Temperature and Humidity
Operating Range +50° to +131°F (+10° to +55°C)25% to 80% RHStorage Range -32° to 122°F (0° to +50°C)5% to 95% RH
Kit includes
Operation ManualCalibration CerticateBattery charger
Digital Densitometer
Ÿ Graphic LED DisplayŸ Compact & Light WeightŸ Drift Free Sensing over a long periodŸ Rechargeable Li-Ion BatteryŸ Auto shut down for Power saving
mode
* specications are subject to change without prior notice
Technical Specications
Rhythm 5D is equipped with unique digital measuring technique for optimum accuracy and nest reliability. The build and handheld design are portable so as to give a exible measuring environment whereas the rechargeable batteries give the most effective energy usage and reusability.
Rhythm 5D is designed to self-calibrate on any illumination range so as to achieve nest accuracy and stability for reading density. The instrument has a exible probe sensor to measure the illumination pinpointed on a wide area. Continuous Refresh Rate , so no need of Read Button for measurement. This instrument is capable of recharging through a USB-A port (mini).
About Us
Arora Technologies (P) Limited
619 & 620 The Great Eastern Galleria, Plot No.20, Sector 4, Nerul, Navi Mumbai 400 706 India
T: +91-22-6138 0600, 2770 3913/23, 2772 9077 | E: [email protected] | W: www.arorandt.com
M/s. Arora Technologies (P) Limited (ATPL) is a sister concern of M/s. NDTS India (P) Limited (which
provides Industrial Services). Keeping the vision of “Make in India”, ATPL is focussing on
Manufacturing and Distribution of NDT Products & Accessories.
We are committed to build long-term relationship with our customers by offering reliable
products & accessories. We pursue our business through innovation, latest technology &
unrelenting quest for excellence.