Upload
mrugesh-patel
View
58
Download
2
Embed Size (px)
Citation preview
EPX
WATERPROOFING COMPOUND
A Water dilutable Waterproofing compound offers low VOC alternative to solvent-based for industrial and architectural applications.It is a water dilutable compound that produces coatings with excellent water and chemical resistance when fully cured. It has excellent adhesion to various substrates such as M.S., Glass, Aluminum, Plastics, Concrete, Ceramics, Masonry, Stones etc.
Description
Characteristics
• Water-dilutable.• Cost effective.• Good adhesion promoter used as intermediate coat to improve adhesion. Provides adhesive coat between old and new concrete.• Excellent corrosion resistance, resistance to water and chemicals and good performance properties.• After dilution with water the product has good pot life.
Properties
Clear yellowish viscous liquid
58 - 62 %
0.98 - 1.02
Water, isopropyl alcohol, butyl glycol
Alcohols, Ketones, Aromatics,Glycol ethers, Water etc.
Appearance
Solids Wt. %
Specific gravity
Solvent
Solvent Compatibility
Dilution
The product diluted with water in the mixing ratio 1:2 i.e. twicethe material taken. Appearance of the solution after dilution ofwater may be translucent to milky white.
RAINO - EPX
Application
The diluted product can be applied by brushing. The waterproofing compound can be applied directly onbuilding terrace or roof without damaging the top substrates. For better adhesive property, proper cleaningof the surface and roughening by wire brush on china chips laying is required. The product can be applied onslightly wet substrate. The best results achieved by application of two to three coats of the product at theinterval of 4-8 hrs between the subsequent coats.
Curing
The water diluted product dries at normal dry atmospheric conditions.Curing rate increases at elevated temperature.As the curing temperature and schedule increases the cured film gives excellent performance properties.The product can be over-coated after 4-24 hrs of drying at normal dry atmospheric conditions.The product can be used with Portland cement to enhance the early water resistance property but the productincreases curing rate of Portland cement so addition of cement curing retarders may required.
Uses
The resin can be used for building terrace waterproofing, primercoat for floor coatings, water resistant coat prior to architecturalcoatings, Thermal/Heat insulation coatings for terrace etc.
Application by Storage
conventional spraying, brushing, dipping In supplied form waterproofing compound has storage stabilityof six months at normal storage conditions of unsealed container.Extended storage at high temperatures should be avoided to prolong the useful life of the resins.The resins should be stored in a cool, dry location at temperatures between 10°C and 35°C.
Handling Precautions
Mandatory and recommended industrial hygiene procedures should be followed whenever reactive resinsystems are being handled and processed.However operators are obliged to use personal protective equipment to avoid skin contact with the materials.
W : www.raino.in
Note : The information given in this publication is based on the present state of ourknowledge but any conclusions and recommendations are made without liability onour part. Buyers and users should make their own assessment of our products undertheir own conditions and for their own requirements.
RAINO - EPX