Raisecom EPON Product Line - WordPress.com... PPT short description / Author 2 The Architecture of EPON PassiveOptical Network Optical Line Terminal Passive Optical Splitter ONU ONU

www.raisecom.com

Raisecom EPON Product

Michael Lu

Raisecom EPON Product

Michael [email protected]

www.raisecom.com PPT short description / Author

Outline

• The EPON System Conception• The Advantage of EPON• The Advantage of EPON• Product Line Overview

• Current EPON Products• Typical applications• Roadmap 2011

• Product Line Introduction• Product Line Introduction• ISCOM5000 OLT Family• ISCOM5100/5200/5300/5104P‐R/5x04‐H1 Series ONU Family• PON + xDSL DLCOM2096 Product Introduction• Passive Optical Splitter• EPON NMS Introduction

www.raisecom.com PPT short description / Author 2

The Architecture of EPON

Passive Optical Network

Optical Line Terminal Passive Optical Splitter

ONU

ONU

Passive Optical Splitter OLT

ONU

Optical Network Unit

• OLT Optical Line Terminal• ONU Optical Network Unit

POS P i O ti l S litt


• POS Passive Optical Splitter

3

Signal Multiplexing

• EPON system adopts WDM technology for single fiber bi‐direction transmission (forced)transmission (forced)

1490nm

• In order to divide bi direction signals from multi users in single fiber

1310nm

• In order to divide bi‐direction signals from multi‐users in single fiber , the following two multiplexing technologies are utilized:

• upstream data adopts TDMA technology;


• Downstream data adopts TDM technology.

4

The Downstream of EPON

TDM (Time Division Multiplex):

• Downstream wavelength 1490nm

• OLT sends mixed data to each ONU by the splitter

www.raisecom.com PPT short description / Author• Each ONU only receives data sending

5

The Upstream of EPON

TDMA (Ti Di i i M lti l A )

TDMA (Time Division Multiple Access )Upstream Wavelength 1310nmEach ONU sends packet to the OLT during the OLT allowable time

TDMA (Time Division Multiple Access )• Upstream Wavelength 1310nm

• Each ONU sends packet to the OLT during the OLT allowable time


without collision detectionwithout collision detection

6

Outline





The Advantage of EPON — Point To Multipoint (P2MP)


The Advantage of EPON — Passive

• Switch: There are many switch network, many active nodes, those nodes mean that potential problem will be more than EPON.• EPON: there are only passive nodes between OLT and ONU, those nodes mean that potential


y p , pproblem will be less than Switch.

9

The Advantage of EPON — Save Investment and Maintenance Cost

LAN topology

Layer2 switch

Resident central room

IPLayer3 switch

Twin‐core optical fiber

central room

CoreResident remote room

:Optical transceiver:L2 switch

C t C i A :Optical transceiverEPON topology

Cost Comparison Area

ONUODN

OLT

Single‐core optical fiber

SplitterIP

Layer3 switch


Core

10

The Advantage of EPON — Interoperability (IOP)

IEEE EPON Under development for 7+ years.

• IOP tested & implemented in all mass‐deployment countries (Japan, Korea, China)• IOP includes both physical layers and service layers (OAM)• Successful IOP verification:‐ Over 20 global vendors at both chip & system levels‐ China Telecom alone certified 15 vendors for commercial interoperability in 2007

Large‐scale commercial deployments with multiple system vendors by numerous service providers (NTT, CTC, CNC, KT, KDDI, etc.)

• IOP is being developed through informal “Plug Fests”• Plug‐fests are simple ONU registration tests with static ONU configuration

V l IOP t f “ l” f t lik VLAN t difi ti t

ITU-T GPON Under development for 7+ years.

• Very low IOP success‐rates for “real” features like VLAN tag modification, etc.• Many missing specifications for real IOP• Many missing tests for real deployments • GPON IOP has shifted from FSAN to Broadband Forum IOP is at least 3 years away

www.raisecom.com PPT short description / Author No commercial deployments of interoperable equipment

11

The Advantage of EPON — Maturity

• EPON • GPONEPON• Easy Technical Standard

• Mature Technology

GPON• Detailed and Complex Technical Standard

• Immature Technology

• Rich In Chipset Supply

• Low Cost

• High Market Share In Worldwide

• Short In Chipset Supply

• High Cost

• Low Market Share In Worldwide

h f b d d h ll b h

g Low Market Share In Worldwide

• EPON can meet the current requirements of bandwidth service. It will be the main method in optical fiber access and FTTx application.


The Advantage of EPON — FTTx + xDSL

• Increase User Bandwidth• The transmission distance has a great impact on the bandwidth of xDSL. DSLAM device

will be close to the end customer due to FTTx+xDSL topologywill be close to the end customer due to FTTx+xDSL topology. • Improve Network Availability

• The uplink of ONUs fully adopt optical fiber. This method can guarantee privacy and security of user data.

• Save Optical Fiber Resource• EPON system adopts different wavelength to transmit uplink and downlink data in one

single fiber, while the traditional technology will adopt 4 single fiber.• Save Operator InvestmentSave Operator Investment

• Adopting EPON access mode, operator can provide multi‐service access without newly‐built rooms, transmission devices, stored‐program control exchanges and switches.

M lti i I t ti A• Multi‐service Integrative Access• EPON system also integrates other service: voice, lease‐line, E1 and such, to improve

the performance of integrated access.

www.raisecom.com PPT short description / Author 13ISCOM EPON +DLCOM DSLAM family products

The Advantage of EPON — FTTx+xDSL

• The advantage of FTTH technology: • The disadvantage of FTTH technology:• High speed

• Long transmission distance

• The advantage of xDSL technology:

• High cost

• Not good at Interoperability

• The disadvantage of xDSL technology:

At present xDSL technology can meet most of requirement on bandwidth Mixed FTTx and xDSL

• Existing copper network

• Saving investment• Short transmission distance

• Low bandwidth

At present, xDSL technology can meet most of requirement on bandwidth. Mixed FTTx and xDSL application would gradually be popularized. For fixed network operators, how to deploy mixed solution is very important. It can help them to save investment and cater for the subscribers’ need.

F t k• For new network:• FTTH / FTTC+DSL

• FTTB/C+DSL/LAN

• For existing network:


• For existing network:• FTTC+DSL

• FTTB+DSL/LAN 14

Outline





Product Line Overview –Current EPON Product Device type Device name Description

OLT ISCOM 5504 1U t d l L2 it hi 4PON 4GE bOLT ISCOM 5504 1U standalone, L2 switching, 4PON+4GE combo

ISCOM 5800 6U chassis, L2 switching, maximum 40 PON ports

ISCOM 5800E 6U chassis, L2 switching, maximum 40 PON ports, 10GE for uplink

ISCOM5100 family ONUData service

ISCOM 5101 1*10/100/1000M Eth+1PONData service ISCOM 5104/Q/‐H1 4FE+1PON

ISCOM 5104P 4FE+2PON

ISCOM 5108/‐PSE 8FE+1PON, 8FE+1PON PSE mode power supply

ISCOM 5116 16FE+1PON

ISCOM 5124 24FE+1PON

ISCOM5200 family ONUData + VOIP service

ISCOM 5204/‐H1 4FE+2POTS+1PON

ISCOM 5208 8FE+ 8POTS+1PON

ISCOM 5216 16FE+16POTS+1PONISCOM 5216 16FE+16POTS+1PON

ISCOM 5224 24FE+24POTS+1PON

Home Gateway Data + Voice + Wi-Fi ISCOM5204W‐H1 4FE+2POTS+1PON+1USB2.0 host

ISCOM5100P family ONUAutomatic Meter Reading

ISCOM 5104P‐4R3 4RS232+4FE+2PON Automatic Meter Reading ISCOM 5104P‐4R8 4RS485+4FE+2PON

ISCOM 5104P‐2R 2RS485/232+4FE+2PON

ISCOM5300 family ONUData + VOIP + CATV service

ISCOM 5304 4FE+4POTS+1CATV+1PON

ISCOM 5304D 4FE+4POTS+1CATV+1PON+1RF


xDSL family IPDSLAMADSL/ADSL2/ADSL2+/VDSL/VDSL2/POTS

DLCOM2096 Mini chassis IPDSLAM with PON uplink port, offering 96 channelsADSL2+ or 192 channels POTS.

16

Product Line Overview –Current EPON Product

ISCOM5101

Data

ISCOM5104/5104Q

Data+Voice Data+Voice+CATVISCOM5104P

Auto Meter Reading Plastic shell

ISCOM5800/E

ISCOM5116

ISCOM5108/5108‐PSE ISCOM5204

ISCOM5216 ISCOM5304DISCOM5104P‐4R8

ISCOM5104P‐4R3 ISCOM5204W‐H1

ISCOM5204‐H1

ISCOM5504 ISCOM5124

OLTISCOM5304ISCOM5224

ONU

ISCOM5104P‐2R ISCOM5104‐H1


IPDSLAM

DLCOM2096 17

Product Line Overview

• Typical Applications



• Typical application • ONU can be installed in the indoor or outdoorONU can be installed in the indoor or outdoor.• Triple‐play solution for residential users.• Save investment.

A li bl id i l b ildi ill• Applicable to new residential buildings, villas.



• Typical application • FTTB: Fiber to The BuildingFTTB: Fiber to The Building

10/1210/12 Floors BuildingFloors Building

22 Floors 22 Floors BuildingBuilding

10/1210/12 Floors BuildingFloors Building

OLTOLT

ONUONUONUONU

Outdoor Cabinet



• Typical application • FTTB: Fiber to The OfficeFTTB: Fiber to The Office

• SIP&H.248 protocol for VoIP.

• ISCOM5204/5208/5216/5224ISCOM5204/5208/5216/5224

ONU for the application.



• Typical application • IPTV Solution

• IGMP Snooping v1/v2/v3

• Maximum 1024 IGMP GroupIPTV Solution • Maximum 1024 IGMP Group

• Uplink Trunk Function



• Typical application • CATV SolutionCATV Solution

• ISCOM5304 ONU

for the application

• Three wavelengthThree wavelength

in one fiber.



• Roadmap 2011

Q1’• ISCOM5104‐H1(A.00)• ISCOM5204‐H1(A.00)• ISCOM5204W H1(A 00)

Q4’• ISCOM5204W‐H1(A.00)• ISCOM5204W‐H1(A.00)• ISCOM 5104P‐2R(A.00)• ISCOM5104PI‐4R(A.00)ISCOM5104 4E1T1(A 00)

Q3’• ISCOM6800

• ISCOM5104‐4E1T1(A.00)• ISCOM5216(B.20)• ISCOM5224(B.00)• ISCOM5104(E.00)

Q2’• ISCOM5508• ISCOM5104(D.00)

• ISCOM5104P(B.00)• ISCOM5104‐NP(B.00)• ISCOM5116(B.00)• ISCOM5124S(C.00)


( )

24

Outline





Product Line Introduction• ISCOM5000 OLT Family – Overview

OLT ISCOM5504 ISCOM5800/E

PON Feature

Single mode fiberMaximum split ratio 1:64Maximum distance 20KmMaximum 256 ONUsWave length: 1310/1490/ 1550nm

Single mode fiberMaximum split ratio 1:64Maximum distance 20KmMaximum 2560 ONUsWave length: 1310/1490/1550nmWave length: 1310/1490/ 1550nm

DBAIEEE 802.3ah1+1 PON protection

DBAIEEE 802.3ah1+1 PON protectionControl board redundancy

Standalone/Chassis Standalone & 1U Chassis & 6U/

S/W mode S&F, 1Mb buffer S&F, 3Mb buffer

Switch Fabric 24G 48G(upgrade 96G)/256G

Traffic control 802.3x & back pressure, Storm control 802.3x & back pressure, Storm control

Multicast GMP Snooping V1/V2/V3, MVR, IGMP Proxy IGMP Snooping V1/V2/V3, MVR, IGMP Proxy

VLAN Q‐IN‐Q,4k active VLAN Q‐IN‐Q,4k active VLAN, VLAN conversion, VLAN aggregation

Spanning Tree 802.1d STP, 802.1w RSTP, MSTP 802.1d STP, 802.1w RSTP, MSTP

www.raisecom.com PPT short description / Author 26MAC address Table

802.1D

16K MAC address, 100 static MAC address

802.1D

16K MAC address / 32K MAC address, 100 static MAC address

Product Line Introduction• ISCOM5504 EPON Standalone OLT – Overview

• 1.25Gbps symmetric rate for both upstream and downstream trafficU 1 64 li i 20k i i di 256 ONU• Up to 1:64 split ratio, up to 20km transmission distance, supports 256 remote ONUs

• IEEE 802.3ad Link aggregation, PON interfaces protected, redundant Power Supply• Upgradeable dynamic DBA algorithm, Customized Quality of Service for assured SLA • Enhance ACL function for security classification of incoming L2 to L4Enhance ACL function for security classification of incoming L2 to L4 • IEEE802.1P QoS supports based on SP, WRR, 8 priority queues per port• IEEE802.3x Flow control in full duplex, back pressure in half duplex• IEEE802.1d/w STP, RSTP and MSTP • IEEE802.1Q 4096 VLAN, IEEE802.1ad QinQ• DHCP Snooping/relay/option82• Up to 8 Ethernet rings, 124 devices in each ring

Bi di ti l AES 128 ti t i l h i• Bi‐directional AES‐128 encryption, triple churning • Storm control, port isolation, port mirror • IGMP Snooping V1/V2/V3, IGMP Proxy, MVR • IEEE802.3ah standard OAM, extended 802.3ah OAM


IEEE802.3ah standard OAM, extended 802.3ah OAM• Console/Telnet/SNMP management/GUI NMS user‐friendly interface

27

Product Line Introduction• ISCOM5504 EPON Standalone OLT

• The connection of ISCOM5504

Out‐of‐band Management Port

Console 4 Combo GE 4 PON ports


Product Line Introduction• ISCOM5800/E EPON Chassis OLT – Feature

• 11 slots of service units can be mixed plugged with 2PON/4PON/2GE/4GE/10GE line modules 10GE line module just for ISCOM5800Emodules, 10GE line module just for ISCOM5800E

• SMC control module hot redundancy, redundant power supply• 1+1 automatic protection, different PON link protecting, link diagnostic on PON network.• IEEE 802.3ad Link aggregation, up to 14 trunk groups, 8 ports in each trunkgg g , p g p , p• Bi‐directional AES‐128 encryption, triple churning• DHCP Snooping, DHCP option82, DHCP server/client, DHCP relay • Upgradeable dynamic DBA algorithm, Customized Quality of Service for assured SLA • Enhance ACL function for security classification of incoming L2 to L4 • IEEE802.1P QoS, up to 8 output queues, SP, WRR • Storm control of broadcast, multicast, DLF • IEEE802 3x Flow control in full duplex back pressure in half duplex• IEEE802.3x Flow control in full duplex, back pressure in half duplex• IEEE802.1Q 4096 VLAN, VLAN stacking, swapping, rewriting • IEEE802.1ad flexible QinQ• Up to 8 Ethernet rings, 124 devices in each ring


p g g• Console/Telnet/SNMP management/GUI NMS interface• Standard and Extended 802.3ah OAM 29

Product Line Introduction

• ISCOM5800 EPON Chassis OLT – Slot distribution



• ISCOM5800E EPON Chassis OLT – Slot distribution



• ISCOM5800/E EPON Chassis OLT – Slot distributionLine Module DescriptionLine Module Description

ISCOM5800‐15 ISCOM5800‐15 chassis with backplane

FANS360 ISCOM5800‐15/ISCOM5800E fan tray

SUB‐PWRII‐DC‐300 ‐48V 300W DC power supply

SUB‐PWRII‐AC 220V 600W AC power supply

ISCOM5800‐SMC ISCOM5800 SMC module

ISCOM5800‐2PON ISCOM5800 PON module with 2 PON ports

ISCOM5800‐4PON ISCOM5800 PON module with 4 PON ports

ISCOM5800‐4GE ISCOM5800 uplink module with 4GE

ISCOM5800‐2GE ISCOM5800 uplink module with 2GE

ISCOM5800E‐15 ISCOM5800E‐15 chassis with backplane

ISCOM5800E‐SMC ISCOM5800E SMC module

www.raisecom.com PPT short description / Author 32ISCOM5800E‐10GEX2‐2GE 2*10GE ports and 2*GE ports for additional SFP, can be only

inserted in ISCOM5800E‐15.


• Current Products

10GEX2-2GE2GE 4GE SMC 2PON 4PON Power-AC Power-DC



• 10G Ethernet Ring application

• 10G Ethernet ring

• Up to 8 Ethernet rings

124 d i i h i• 124 devices in each ring

• Triple-play service

• Automatic Meter Reading

• 1+1 PON link protection



• ISCOM5100/5200/5300/5104P-R/5x04-H1 Series ONU Family• ISCOM5100: ISCOM5101, ISCOM5104/P/Q, ISCOM5104‐H1, ISCOM5108/PE,

ISCOM5116 ISCOM5124/SISCOM5116,ISCOM5124/S.• ISCOM5200: ISCOM5204, ISCOM5204‐H1, ISCOM5204W‐H1, ISCOM5208,

ISCOM5216, ISCOM5224. • ISCOM5300: ISCOM5304, ISCOM5304D.

Data Data + VoIP Data + VoIP + CATVAuto Meter Reading

,• ISCOM5104P‐X: ISCOM5104P‐4R3, ISCOM5104P‐4R8, ISCOM5104P‐2R

ISCOM5304ISCOM5304D

ISCOM5204ISCOM5204-H1ISCOM5204W-H1

ISCOM5101ISCOM5104-H1ISCOM5104P ISCOM5104Q

ISCOM5104P-4R3ISCOM5104P-4R8ISCOM5104P-2R

ISCOM5216ISCOM5224

ISCOM5104QISCOM5108/PSEISCOM5116ISCOM5124/S


Product Line Introduction• ISCOM5100 Series Family ONU – OverviewONU ISCOM5101 ISCOM5104/P/Q ISCOM5108/PSE ISCOM5116 ISCOM5124/S

PON FeatureSingle mode fiberMax distance 20Km1310nm, 1490nm

Single mode fiberMax distance 20Km1310nm, 1490nm




S/W Mode S&F S&F S&F S&F S&F

h bSwitch Fabric 2G 3.8G 3.8G 7.6G 11.4G

Port Density 1 *10/100/1000 Eth 4*10/100M Eth1~2*PON port 8*10/100M Eth 16*10/100M Eth 24*10/100M Eth

Multicast ‐IGMP snooping v1/v2/v3

‐IGMP snooping v1/v2/v3

IGMP snooping v1/v2/v3

IGMP snooping v1/v2/v3

IGMP snooping v1/v2/v3v1/v2/v3 v1/v2/v3 v1/v2/v3 v1/v2/v3 v1/v2/v3

MAC addressTable

‐ 116 static MAC address ‐8K/2K MAC address ‐8K MAC address ‐8K MAC address ‐8K MAC address

VLAN 4k active VLAN,Q‐IN‐Q,

4k active VLAN,Q‐IN‐Q



4k active VLAN,Q‐IN‐QQ IN Q, Q IN Q Q IN Q Q IN Q Q IN Q

Power consumption ≤10W �≤10W �≤10W/≤70W �≤15W �≤18W

Dimension W×D×H 260×130×38 mm 260×130×54

260×130×54 mm260×130×44 mm320×200×44 mm 440×180×44mm 440×270×44mm

440×220×44mm

www.raisecom.com PPT short description / Author 36Weight 1.1KG 1KG/1.3KG 1.2KG/2.0KG 2.4KG 1.8KG

Product Line Introduction• ISCOM5100 Series EPON ONU Family

• IEEE802.3ah compliant EPON ONU deviceU d bl d i DBA l i h f d b d id h ll i• Upgradeable dynamic DBA algorithm for end user bandwidth allocation

• Triple Churning, Bi‐directional AES‐128 encryption• Link measurement and diagnostics for PON networks • 10/100M or 10/100/1000M auto negotiation MDI/MDIX auto sensing

ISCOM5101

ISCOM5104Q

10/100M or 10/100/1000M auto negotiation, MDI/MDIX auto sensing• Loop back detection for avoiding storms caused by end user loop• Enhance ACL function for security classification of incoming L2 to L4 packets• DHCP Snooping, PPPoE relay

ISCOM5104

ISCOM5108• Storm control of broadcast, multicast and DLF• STP and RSTP for improving network resiliency and reliability• 4096 IEEE802.1Q VLAN, VLAN stacking and rewriting

C t i d Q lit f S i f d SLA

ISCOM5108-PSE

• Customized Quality of Service for assured SLA• IGMP Snooping and MVR for video services• Console/Telnet/SNMPV1,V2,V3/ Standard and Extended 802.3ah OAM• Waterproof and dustproof outdoor ONU with enclosed metal shell

ISCOM5116

ISCOM5124


Waterproof and dustproof outdoor ONU with enclosed metal shell • "Power over Ethernet" product following IEEE802.3af standard

37ISCOM5104P

Product Line Introduction• ISCOM5104P-X Series ONU Family – Overview

ONU ISCOM5104P-4R3 ISCOM5104P-4R8 ISCOM5104P-2R

PON FeatureSingle mode fiberMax distance 20Km1310nm, 1490nm



S/W Mode S&F S&F S&F

Switch Fabric 6G 6G 6G

Port Density4*10/100M Eth2*PON port4*RS232

4*10/100M Eth2*PON port4*RS485

4*10/100M Eth2*PON port2*RS4852*RS2322 RS232

Multicast ‐IGMP snooping v1/v2/v3 ‐IGMP snooping v1/v2/v3 IGMP snooping v1/v2/v3

MAC addressTable 2K MAC address 2K MAC address 2K MAC address

VLAN 4k active VLAN, Q‐IN‐Q, 4k active VLAN, Q‐IN‐Q 4k active VLAN, Q‐IN‐Q

Power consumption ≤10W �≤10W �≤10W

Dimension W×D×H 260×130×44 mm 260×130×54 mm 260×130×54 mm


Weight 1.5KG 1.3KG 1.3KG

Product Line Introduction• ISCOM5104P-X Series ONU Family

• Redundancy PON link protection switchingRS232/ RS485 i l 300/1200/2400/4800/9600/19200b• RS232/ RS485 port can support serial port rate 300/1200/2400/4800/9600/19200bps

• Upgradeable dynamic DBA algorithm for end user bandwidth allocation• Enhance ACL function for security classification of incoming L2 to L4 packets• Triple Churning Bi‐directional AES‐128 encryptionTriple Churning, Bi directional AES 128 encryption• 10/100M auto negotiation• MDI/MDIX auto sensing• Loop back detection for avoiding storms caused by end user loop• Storm control of broadcast, multicast and DLF• STP and RSTP for improving network resiliency and reliability• 4096 IEEE802.1Q VLAN, VLAN stacking and rewriting

C t i d Q lit f S i f d SLA

ISCOM5104P-2R

• Customized Quality of Service for assured SLA• IGMP Snooping and MVR for video services• Console/Telnet/SNMP/ Standard and Extended 802.3ah OAM

ISCOM5104P-4R3

www.raisecom.com PPT short description / Author 39ISCOM5104P-4R8


• Typical Application for Remote Ammeter

• 4 channels RS485 ports.

• 4 channels RS232 ports.

1 1 PON li k t ti• 1+1 PON link protection.


Product Line Introduction• ISCOM5200 Series ONU Family – OverviewONU ISCOM5204 ISCOM5208 ISCOM5216 ISCOM5224

PON Feature

Single mode fiberMax distance 20Km1310nm, 1490nmDBAIEEE 802 3ah



Single mode fiberMax distance 20Km1310nm, 1490nmDBAIEEE 802 3ahIEEE 802.3ah IEEE 802.3ah IEEE 802.3ah IEEE 802.3ah

Voice Feature SIP RFC3261, RFC2543H.248

SIP RFC3261, RFC2543H.248

SIP RFC3261, RFC2543H.248

SIP RFC3261, RFC2543 H.248

S/W Mode S&F S&F S&F S&F

Switch Fabric 5.6G 5.6G 7.6G 7.6G

Port Density 4FE/ 2Pots/ 1PON 8FE/ 8Pots/ 1PON 16FE/ 16Pots/ 1PON 24FE/ 24Pots/ 1PON

MAC address Table ‐8K MAC address ‐8K MAC address ‐8K MAC address ‐8K MAC address

VLAN Q‐IN‐Q,4k active VLAN Q‐IN‐Q,4k active VLAN Q‐IN‐Q,4k active VLAN Q‐IN‐Q,4k active VLAN

Power consumption ≤10W �≤25W �≤45W �≤45W

Dimension W×D×H 200×130×32 mm 440×266×44 mm 440×266×44 mm 440×235×44 mm

www.raisecom.com PPT short description / Author 41Weight 0.8KG 3.7KG 3.7KG 3.4KG


• Support SIP/SDP, H.248, Codec support :G.711 a/μ law,G.729,G.726.G.723 etcMi d SIPP2MP ll b SIP P2P ll• Mixed SIP,P2MP calls by SIP proxy server, P2P calls

• Link measurement and diagnostics for PON networks • IEEE802.3ah compliant EPON ONU device• Upgradeable dynamic DBA algorithm for end user bandwidth allocationUpgradeable dynamic DBA algorithm for end user bandwidth allocation• Bi‐directional AES‐128 encryption, Triple Churning• 10/100M auto negotiation, MDI/MDIX auto sensing• Loop back detection for avoiding storms caused by end user loop

ISCOM5204

• Enhance ACL function for security classification of incoming L2 to L4 packets• Storm control of broadcast, multicast and DLF• DHCP Snooping, PPPoE relay

STP d RSTP f i i t k ili d li bilit

ISCOM5208

• STP and RSTP for improving network resiliency and reliability• 4096 IEEE802.1Q VLAN, VLAN stacking and rewriting• Customized Quality of Service for assured SLA• IGMP Snooping and MVR for video services

ISCOM5216


IGMP Snooping and MVR for video services• Console/Telnet/SNMP/ Standard and Extended 802.3ah OAM

42ISCOM5224

Product Line Introduction• ISCOM5300 Series ONU Family – OverviewONU ISCOM5304 ISCOM5304D

PON Feature

Single mode fiberMax distance 20Km1310nm, 1490nmDBA


Voice Feature SIP RFC3261, RFC2543, H.248 SIP RFC3261, RFC2543, H.248

CATV Feature

75 Ω&F type connector80dBuV/per channel45‐870MHzCSO ≥62dB

75 Ω&F type connector80dBuV/per channel45‐870MHzCSO ≥62dBCSO ≥62dB

CTB ≥65dBCNR≥46dB

CSO ≥62dBCTB ≥65dBCNR≥46dB

S/W Mode ‐ S&F ‐ S&F

Switch Fabric 5 6G 5 6GSwitch Fabric ‐5.6G ‐5.6G

Port Density ‐4FE/ 2Pots/ 1PON ‐4FE/ 2Pots/ 2PON

VLAN ‐Q‐IN‐Q,4k active VLAN ‐Q‐IN‐Q,4k active VLAN

‐ 4 queues per port ‐ 4 queues per port


QoSq p p

‐ 802.1p CoS, DSCP and port priority

q p p

‐ 802.1p CoS, DSCP and port priority


• Support CATV servicesS SIP/SDP H 248 C d G 711 / l G 729 G 726 G 723• Support SIP/SDP, H.248, Codec support :G.711 a/μ law,G.729,G.726.G.723 etc

• Mixed SIP,P2MP calls by SIP proxy server, P2P calls• Link measurement and diagnostics for PON networks • Upgradeable dynamic DBA algorithm for end user bandwidth allocationUpgradeable dynamic DBA algorithm for end user bandwidth allocation• Triple Churning, Bi‐directional AES‐128 encryption• 10/100M auto negotiation, MDI/MDIX auto sensing• Loop back detection for avoiding storms caused by end user loop• Enhance ACL function for security classification of incoming L2 to L4 packets• Storm control of broadcast, multicast and DLF• DHCP Snooping, PPPoE relay

STP d RSTP f i i t k ili d li bilit• STP and RSTP for improving network resiliency and reliability• 4096 IEEE802.1Q VLAN, VLAN stacking and rewriting• Customized Quality of Service for assured SLA• IGMP Snooping and MVR for video services

ISCOM5304


IGMP Snooping and MVR for video services• Console/Telnet/SNMP/ Standard and Extended 802.3ah OAM

44ISCOM5304D


• Triple play typical Application

• CATV, IPTV, HDTV

• IP phone, POTS phone

D t• Data

• Three wavelength in one

fiber.


Product Line Introduction• ISCOM5300 Series ONU Family – OverviewONU ISCOM5104‐H1 ISCOM5204‐H1 ISCOM5204W‐H1

PON Feature




Voice Feature --- ‐SIP, H.248, T.38 ‐SIP, T.38

Switch Fabric ‐3.8G ‐5.6G ‐5.6G

Port Density ‐4FE/ 1PON ‐4FE/ 2Pots/ 1PON ‐4FE/ 2Pots/ 2PON

Wi‐Fi Standard ‐‐‐ ‐‐‐ ‐802 11 b/g/nWi‐Fi Standard ‐‐‐ ‐‐‐ ‐802.11 b/g/n

Gateway ‐‐‐ ‐‐‐ Home gateway

Multicast ‐IGMP snooping v1/v2/v3 ‐IGMP snooping v1/v2/v3 ‐IGMP snooping, IGMP Proxy

VLAN ‐802.1Q 64 Active Vlan, QinQ ‐802.1Q 64 Active Vlan, QinQ ‐802.1Q 4K Active Vlan

Management ‐Telnet/SNMP/OAM/GUI‐ NMS ‐Telnet/SNMP/OAM/GUI‐ NMS ‐TR‐69/Web‐based GUI/OAM

Power consumption ≤10W �≤10W �≤10W

Dimension W×D×H 180×130×39 mm 226×169×37 mm 218×183×443mm


W D H

Weight 1.0KG 1.5KG 1.5KG

Product Line Introduction• ISCOM5104-H1, ISCOM5204-H1 ONU

• VOIP features for ISCOM5204‐H1S SIP/SDP H 248 d G 711 / l G 729 G 726 G 723• Support SIP/SDP, H.248, codec support :G.711 a/μ law,G.729,G.726.G.723 etc,

• Mixed SIP,P2MP calls by SIP proxy server, P2P calls• Data features for ISCOM5104‐H1, ISCOM5204‐H1• IEEE802 3ah compliant EPON ONU deviceIEEE802.3ah compliant EPON ONU device• Upgradeable dynamic DBA algorithm for end user bandwidth allocation• Triple Churning, Bi‐directional AES‐128 encryption• 10/100M auto negotiation, MDI/MDIX auto sensing• Loop back detection for avoiding storms caused by end user loop• Enhance ACL function for security classification of incoming L2 to L4 packets• Storm control of broadcast, multicast and DLF

STP d RSTP f i i t k ili d li bilit• STP and RSTP for improving network resiliency and reliability• 4096 IEEE802.1Q VLAN, VLAN stacking and rewriting• Customized Quality of Service for assured SLA• IGMP Snooping and MVR for video services

ISCOM5204-H1


IGMP Snooping and MVR for video services• Console/Telnet/SNMP management

47ISCOM5104-H1

Product Line Introduction• ISCOM5204W-H1 EPON HGU

• WLAN with high‐speed data transfer rate of up to 270 Mbps, IEEE 802.11b/g/n, 2.4 GHz compliant equipment, Max 8 terminal users for connectingcompliant equipment, Max 8 terminal users for connecting

• Support WiFi protected setup (WPS), Support multiple SSIDs (up to 4 SSIDs)• Wireless transmission distance. 100 meters outdoors, 60 meters Indoors coverage area • Support SIP, UDP, SDP, RTP/RTCP protocol• Codec support : G.711A,G.711U,G.723.1,G.729AB,G.726,G.722 etc• Fax/modem capability: T.38 Fax Relay, G.711 Pass‐Through• Voice supplementary services CLIP, CLIR, Call Forwarding, Call hold, Call waiting, Call

Transfer 3 way meeting EtcTransfer, 3 way meeting, Etc. • 4*10/100M auto negotiation for LAN interface, symmetric 1.25Gbps for WAN interface• 1*USB2.0 Host port • Support at least 64 learning MAC addresses, 4K active VLAN• Support IPSec VPN, Support IP routing, source and destination routing• Support virtual server , IP Filter, DMZ Host etc.• Forward Error Correction(FEC) coding for an improved link budget

( )


• Support PPP Over Ethernet (PPPoE), NAT and NAPT• Web‐based GUI, TR‐69 with TR‐98, RT‐104

48ISCOM5204W‐H1

Product Line Introduction• DLCOM2096 IPDSLAM Feature Introduction

• Maximum offering 4*24 channels ADSL/ADSL2/ADSL2+, 4*16 channels VDSL/VDSL2 4*48 channels POTSVDSL/VDSL2, 4 48 channels POTS.

• 4096 IEEE 802.1q VLAN, QinQ, VLAN stacking, VLAN rewriting, VLAN translation, VLAN trunk.

• QoS based on classification, queue; rate limit, traffic shaping, ACLQoS based on classification, queue; rate limit, traffic shaping, ACL• 512 multicast, 1024 video programs.• Port isolation, MAC address limitation, MAC address filter, anti‐dos, port

binding, loop detection, DHCP.g, p ,• Local and remote management. Serial port, telnet, ping, trace, route.

DLCOM2096-24ADSL

DLCOM2096-SMC-EPON

DLCOM2096-48POTS

DLCOM2096



• FTTx + xDSL Application

•DLCOM2096 IPDSLAM

for xDSL access.

ISCOM5000 f il•ISCOM5000 family

products for FTTx.


Product Line Introduction• Optical Parameter of PON Module

Parameter OLT PON Module ONU PON Module

Transmiting Optical Power 2～7dBm －1～4dBm

Receiving Optical Sensitivity 27dBm 26dBmReceiving Optical Sensitivity －27dBm －26dBm

Receiving Overload Optical Power －6dBm －3dBm

System Allowed Attenuation 29～34dBm 28～33dbm

LC/PC


Product Line Introduction• Raisecom provides various optical splitters, split ratio is from 1:2, 1:4, 1:8, 1:16,

1:32 to 1:64 with different encapsulation and optical connector for a wide range of applications such as GPON, EPON and FTTx.

• Indoor Splitter

Part Number Split Insertion Polarization Connector Uniformity PackagePart Number Ratio Loss (dB) Loss (dB) Connector (Max dB) Dimension

POS‐1/8‐T‐SP/SA/FP/FA/LP/LA

1:8 10.7 0.3 SP/SA/FP/FA/LP/LA 0.8 19’’ 1U

POS 1/16 TPOS‐1/16‐T‐SP/SA/FP/FA/LP/LA

1:16 14.0 0.3 SP/SA/FP/FA/LP/LA 1.0 19’’ 1U

POS‐1/32‐T‐SP/SA/LP/LA 1:32 17.3 0.3 SP/SA/LP/LA 1.5 19’’ 1U

POS‐1/64‐T‐ LP/LA 1:64 21 3 0 5 LP/LA 2 0 19’’ 1UPOS‐1/64‐T‐ LP/LA 1:64 21.3 0.5 LP/LA 2.0 19 1U

POS‐2/8‐T‐ SP/FP/LP 2:8 11.2 0.3 SP/FP/LP 0.8 19’’ 1U

POS‐2/16‐T‐ SP/FP/LP 2:16 15.0 0.3 SP/FP/LP 1.0 19’’ 1U


POS‐2/32‐T‐ SP/ LP 2:32 18.2 0.3 SP/ LP 1.5 19’’ 1U


• Indoor Box-shaped Splitter With Adapter

Part Number Split Ratio

Insertion Loss (dB)

PolarizationLoss (dB) Connector Uniformity

(Max dB)PackageDimension

POS‐1/2‐L‐SP/SA/FP/FA/LP/LA

1:2 4.2 0.3 SP/SA/FP/FA/LP/LA 0.8 120×80×18

POS‐1/4‐R‐ SP/SA/FP/FA 1:4 7.4 0.3 SP/SA/FP/FA 0.8 156×120×18

POS‐1/4‐L‐ LP/LA 1:4 7.4 0.3 LP/LA 0.8 120×80×18


Product Line Introduction• Indoor/Outdoor Splitter


Insertion Loss (dB)



POS‐1/2‐O‐ SP/SA/FP/FA‐1.5m 1:2 4.2 0.3 SP/SA/FP/FA 0.8 100×80×9POS 1/2 O SP/SA/FP/FA 1.5m 1:2 4.2 0.3 SP/SA/FP/FA 0.8 100×80×9

POS‐1/4‐O‐ SP/SA/FP/FA ‐1.5m 1:4 7.4 0.3 SP/SA/FP/FA 0.8 100×80×9

POS‐1/8‐P‐ SP/SA/FP/FA ‐1.5m 1:8 10.7 0.3 SP/SA/FP/FA 0.8 136×100×12

POS‐1/16‐S‐ SP/SA/FP/FA ‐1.5m 1:16 14.0 0.3 SP/SA/FP/FA 1.0 140×114×18

POS‐1/32‐S‐ SP/SA/FP/FA ‐1.5m 1:32 17.3 0.3 SP/SA/FP/FA 1.5 140×114×18

POS‐1/64‐U‐ SP/SA/FP/FA ‐1.5m 1:64 21.3 0.5 SP/SA/FP/FA 2.0 188×120×18

POS‐2/8‐P‐SP/FP‐1.5m 2:8 11.2 0.3 SP/FP 0.8 136×100×12

POS‐2/16‐S‐ SP/FP ‐1.5m 2:16 15.0 0.3 SP/FP 1.0 140×114×18

POS 2/32 U SP/FP 1 5m 2:32 18 2 0 3 SP/FP 1 5 188×120×18


POS‐2/32‐U‐ SP/FP ‐1.5m 2:32 18.2 0.3 SP/FP 1.5 188×120×18

Product Line Introduction• Outdoor Splitter


Insertion Loss (dB)



POS‐1/2‐J1:2

4.2 0.3 Without connector

0.8‐

POS‐1/4‐J1:4


0.8‐

connector

POS‐1/8‐J1:8


0.8‐

POS‐1/16‐J1:16

14.0 0.3 Without 1.0‐1:16

connector‐

POS‐1/32‐J1:32


1.5


Product Line Introduction• NMS Introduction

• The device under management should have an SNMP agent, either an in‐built one or an external one.

• Stand‐alone Deployment: deploy database, server and li t PCclient on one PC

• Distributed Deployment: deploy clients on

t PC lseparate PCs, several clients may operate opposite one server


Product Line Introduction• NMS Introduction

CPU RAM Hard Disc Space

Complete Installation Pentium 4 3GHz 2G 80G

Client Only Pentium 4 2Ghz 1G 500MClient Only Pentium 4 2Ghz 1G 500M

• Descriptions• This is the recommended requirement on the hardware configuration

that guarantees the smooth operating of NView NNM V5.0. The requirement may increase as the capacity of the network under management increases.

• Operation System Requirements:• Windows 2000 series• Windows 2003 series

• Monitor Resolution Requirements:• Recommended: 1152 x 864• Minimal: 1024 x 768


Windows 2003 series• Windows XP series

Minimal: 1024 x 768

Product Line Introduction• Support in-band or out-band management mode

• In‐band management commandinterface ip <0‐14> */Enter layer3 interface configuration modeip address ip‐address [ip‐mask] vlan‐id */ Configure layer3 interface ip address and relative static vlan id/ Configure layer3 interface ip address and relative static vlan idno ip address ip‐address*/ delete layer3 interface ip addressshow interface ip*/ f f*/ display layer3 interface ip information

• Out‐band management commandmangement‐port ip address A.B.C.D [A.B.C.D]*/ configure out‐band mangement‐port ip and maskshow management‐port ip*/ display out‐band management ip informationshow management port


show management‐port*/ display out‐band management port information


Raisecom(config)#interface ip 1

• Support in-band or out-band management modeRaisecom(config)#interface ip 1 Raisecom(config‐ip)#ip address 192.168.4. 200 255.255.255.0 100 Set successfully

Raisecom(config)#ip default‐gateway 192.168.4.1Set successfully

Note: Management VLAN: 100Management IP: 192.168.4.200/24Default gateway: 192.168.4.1



• Basic Service Application and Configuration－NViewNNM System Installationy• EPON management element：

• Management system: NViewNNM_V5.2• License

• Installation：• Step 1: Install NView NNM software (select default database, then add license)• Step 2: Select License



Documents

Raisecom EPON Product Line - WordPress.com... PPT short description / Author 2 The Architecture of EPON PassiveOptical Network Optical Line Terminal Passive Optical Splitter ONU ONU