RALSON(INDIA) LIMITED

Ralson today stands tall as India's largest company in the field of bicycle tyre industry. Location: Ralson Nagar, GT Road, Ludhiana.Led from the front in 1974 by Mr. Sanjeev Pahwa Chairman-Cum-Managing Director, under the name “Ralson Cycle Pvt. Ltd.”1982: name changed to Ralson Cycle Pvt. Ltd.1985: Ralson India Ltd.In 2003 a new plant was set up at Doraha for manufacturing automobile tyres

COMPANY INTRODUCTION

Company's turnover has shot up to 500 crores in 2009. Presently company is producing: 1.1.25 Lac tyres & 1.50 Lac tubes per day for bicycles 2.1 lac tyre, tubes per month for automobile tyres.It currently has workforce of about 5000 workmen. Distribution network: 31 branches ,13 consignee agents and 8000 dealers spread all over India.

Ralson (India) Limited has one of the state of art infrastructure in the  Bicycle Tyres & tube manufacturers industry. Ralson is most trusted brand with 4 decades of manufacturing expertise. Under expansion plan Ralson has created an additional facility to manufacture Two Wheeler, Three Wheeler and farm tyres etc.under brand name “RALCO". The factory in Ludhiana is spread over a sprawling 46 acres and employs a workforce of 4000 people. We:

115,000 cycle tyres a day and around 30 lacs cycle tyres a month.

1,25,000 cycle tubes a daywhich makes 32.5 lacs per month.

2000 Auto tyres per day & 50,000 per month

PRODUCTTwo wheeler tyres

Three wheeler tyres

E-bike tyres

LCV tyres(Light Commercial Vehicles)

ADV tyres(Animal Driven Vehicles)

A Milling Machine is a machine tool used to machine solid materials. Milling machines are often classed in two basic forms, horizontal and vertical, which refers to the orientation of the main spindle. Both types range in size from small, bench-mounted devices to room-sized machines. Unlike a drill press, which holds the workpiece stationary as the drill moves axially to penetrate the material, milling machines also move the workpiece radially against the rotating milling cutter, which cuts on its sides as well as its tip.

 The lathe is a machine tool which holds the workpiece between two rigid and strong supports called centers or in a chuck or face plate which revolves. The cutting tool is rigidly held and supported in a tool post which is fed against the revolving work.The normal cutting operations are performed with the cutting tool fed either parallel or at right angles to the axis of the work. The cutting tool may also be fed at an angle relative to the axis of work for machining tapers and angles.

Distributional

NetworkRalson – Ralco is the most favored brand of major OEMs like HERO – AVON –T.I –ATLAS & other prominent bicycle manufacturers of India. With our quality products, we have been able to win the confidence of our clients. 

Quality Certification

We are ISO 9001:2008 certified by M/s Intertek Moody International. Apart from this we have other prestigious certifications with us like BIS and we are striving to achieve EN certification as well.Our R& D Lab is recognized by DSIR.